summaryrefslogtreecommitdiff
path: root/sys
AgeCommit message (Collapse)Author
2007-09-17Do not take wild guesses at how if_enc's internal works, includePierre-Yves Ritschard
net/if_enc.h instead. ok todd@ and probably claudio who's in the train.
2007-09-17remove unneeded malloc.h include.Federico G. Schwindt
2007-09-17Only the most obvious bzero() -> M_ZERO changes. No cast changes, noKenneth R Westerback
MALLOC/FREE, etc. Just adding M_ZERO to malloc() and deleting an immediately adjacent bzero().
2007-09-17A little cleaning..Brad Smith
- de-register - ANSI functions - remove a commented out and bogus ioctl Tested by todd@ ok dlg@
2007-09-17regenBrad Smith
2007-09-17add the Marvell Yukon 2 88E8040 PCI id.Brad Smith
From the Marvell Linux sk98lin driver ok dlg@
2007-09-17Some bzero() -> M_ZERO. ok jakemsr@Kenneth R Westerback
2007-09-16Remove more obsolete firmware specific bits.Marcus Glocker
2007-09-16Remove obsolete firmware specific bits.Marcus Glocker
2007-09-16another M_ZERO diff.Pierre-Yves Ritschard
2007-09-16A couple of obvious bzero() -> M_ZERO changes I missed.Kenneth R Westerback
2007-09-16Better version of fake KKASSERT until they are changed properly.Jonathan Gray
2007-09-16Do sc_disable when device gets stopped.Marcus Glocker
OK jsg@
2007-09-16Clear error before starting m_defrag() equivalent.Jonathan Gray
2007-09-16Move some noisy debug printfs to higher levels.Jonathan Gray
2007-09-16CardBus works much better when sc_enable is called.Jonathan Gray
Remove some safety returns while here. ok mglocker@
2007-09-16Free ucode if an error happens while FW / IV load. Always return a properMarcus Glocker
code in case of error.
2007-09-16Convert most of the remaining non firmware handling code.Jonathan Gray
2007-09-16some style(9). no binary change.Federico G. Schwindt
2007-09-16Remove most of the __unused due to to code being enabled.Jonathan Gray
2007-09-16MALLOC/FREE -> malloc/free, M_ZERO, extraneous casts,Kenneth R Westerback
extraneous #include <malloc.h>
2007-09-16Obvious M_ZERO changes.Kenneth R Westerback
2007-09-15Adapt firmware images prefix to driver name. Needs bump to firmwareMarcus Glocker
package version 1.1.
2007-09-15Get IV load working. Simplified IV loading routine (mainly a rewrite).Marcus Glocker
Adapted IV loading routines so we can use it with our one file firmware.
2007-09-15Allow to pull out an usb stick with ffs filesystem while mountedAlexander Bluhm
and a file is written onto the stick. Without these fixes the machine panics or hangs. The usb fix calls the callback when the stick is pulled out to free the associated buffers. Otherwise we have busy buffers for ever and the automatic unmount will panic. The change in the scsi layer prevents passing down further dirty buffers to usb after the stick has been deactivated. In vfs the automatic unmount has moved from the function vgonel() to vop_generic_revoke(). Both are called when the sd device's vnode is removed. In vgonel() the VXLOCK is already held which can cause a deadlock. So call dounmount() earlier. ok krw@, I like this marco@, tested by ian@
2007-09-15malloc sweep:Henning Brauer
-remove useless casts -MALLOC/FREE -> malloc/free -use M_ZERO where appropriate instead of seperate bzero feedback & ok krw, hshoexer
2007-09-15Give hardware physical addresses and add some missingJonathan Gray
bus_dmamap_create() calls.
2007-09-15realy -> really in comments. Most reported on tech@ by Jung.Kenneth R Westerback
2007-09-15[fF]uther -> [fF]urther in comments and man page. First one spotted onKenneth R Westerback
tech@ by Jung.
2007-09-15most of the remaining bus_dma conversionJonathan Gray
2007-09-15Convert bus_dmamap_sync() calls.Jonathan Gray
2007-09-15Convert bus_dma_load_mbuf() calls and remove unrequired callbackJonathan Gray
code previously used.
2007-09-15fix error introduced by my previous commit:Hans-Joerg Hoexer
"MALLOC(*swd, ...)" vs. "swd = malloc(..." ok millert
2007-09-15suitible -> suitableBrad Smith
ok mglocker@ dlg@
2007-09-15replace ctob and btoc with ptoa and atop respectivelyMartin Reindl
help and ok miod@ thib@
2007-09-15convert bus_dmamap_unload() callsJonathan Gray
remove bus_dma_tag_destroy() calls as we don't use/require them.
2007-09-15convert bus_dmamap_load() callsJonathan Gray
2007-09-15Properly fill in some of the pci information the driver uses internally.Jonathan Gray
2007-09-15define BWI_DEBUG to make things easierJonathan Gray
2007-09-14add the NVIDIA MCP73/MCP77 IDE controller PCI ids.Brad Smith
ok dlg@
2007-09-14- correct error message if pci_mapreg_map() fails by not printing theBrad Smith
device name in front. - remove printing of the name Compaq in front of the adapter model name. this is cac(4) it is pretty obvious this is a Compaq adapter. ok dlg@
2007-09-14regenBrad Smith
2007-09-14add the Marvell Yukon 2 88E8048 PCI id.Brad Smith
From the Linux sky2 driver ok dlg@
2007-09-14add two new chip revisions.Brad Smith
From FreeBSD ok dlg@
2007-09-14Get firmware load working. Adapt firmware routines that way so we canMarcus Glocker
use our one file firmware.
2007-09-14correct type printingTheo de Raadt
2007-09-14Use our standard ratesets from ieee80211 instead.Marcus Glocker
2007-09-14Sort prototypes.Marcus Glocker
2007-09-14Another cleanup run.Marcus Glocker
2007-09-13Here too: Convert MALLOC/FREE to malloc/free and use M_ZERO where applicable.Hans-Joerg Hoexer
error spotting and ok krw@
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 20:18:49 +0000