src - OpenBSD base system

Age	Commit message (Collapse)	Author
2009-08-08	Make imsg_clear close and free any fds in the received fd queue as well as	Nicholas Marriott
	freeing the msgbuf. While here also remove an unnecessary while loop. ok eric pyr
2009-08-06	Implement the error handling as proposed in draft-ietf-idr-optional-transitive	Claudio Jeker
	for optional transitive attributes. In short if the partial bit is set on an optional transitive attribute but the attribute fails validation ignore the attribute or mark the path as ineligible instead of killing the session with a NOTIFICATION. Tested, input and OK sthen, OK henning
2009-08-03	Make announce "self" work like all others (self is a bit special because	Claudio Jeker
	it's a keyword but "self" is not). OK henning@
2009-07-24	RECONF_REINIT is a bad initial reconf_action state for templates.	Claudio Jeker
	getpeerbyip() initializes the full peer and so there is no need to do the work a second time -- especially since there it was already in the wrong state resulting in strange behaviour. OK henning@
2009-07-23	make buf_write() behave like msgbuf_write(): send out only the	Eric Faurot
	bytes that were filled, not the whole buffer. ok pyr@ gilles@
2009-07-23	Send the used kroute along with the nexthop information. This allows us	Claudio Jeker
	to show all necessary information in bgpctl show next. OK henning@
2009-07-23	knexthop_compare() failed to compare correctly and because of this it was	Claudio Jeker
	possible to corrupt the nexthop RB tree. Use the same compare logic used in the kroute compare functions. Nice side effect is a nicely sorted list in bgpctl show next. OK sthen@ henning@
2009-07-20	Include more info in the bgpctl show nexthop ctl message. Mainly add the	Claudio Jeker
	gateway used for non-connected routes. This info was missing all the time and often resulted in massive confusion when the nexthop selection choosed a bad nexthop.
2009-07-20	On config reload errors free the list of ribs so that following reloads	Claudio Jeker
	don't fail because of redefinition conflicts. This problem was reported by some people.
2009-07-20	Flag added RIBs as F_RIB_NOFIB \| F_RIB_NOEVALUATE in the no-eval case even	Claudio Jeker
	though F_RIB_NOEVALUATE implicitly includes F_RIB_NOFIB.
2009-07-12	Remove a semicolon at the end of an if statement so the	Jonathan Gray
	test if a buffer isn't NULL before freeing has effect. This was harmless as it is in a failure case and free(NULL) is valid in userland.
2009-06-29	Protect the other rde_send_kroute() with a F_RIB_NOFIB check.	Claudio Jeker

2009-06-29	Doh! Fix logic botch that disconnected the FIB from the Loc-RIB instead of	Claudio Jeker
	making sure that other RIBs are not injecting routes into the FIB.
2009-06-29	Unfuck mrt table dumps and plug a memory leak while there.	Claudio Jeker

2009-06-25	Add missing RTM_VERSION checks. Bad me, no cockies.	Claudio Jeker
	Tested and OK sthen@, OK henning@
2009-06-25	incorrect .PATH setting, discovered with nicm	Theo de Raadt

2009-06-22	Log a warning when "enforce remote-as" is triggered. ok claudio@	Stuart Henderson

2009-06-12	Move prefixlen2mask and inet6applymask to util.c so that we can kill the	Claudio Jeker
	copies in bgpctl.
2009-06-08	revert this change by eric@:	David Gwynne
	Make the imsg protocol network-safe. it might be network safe, but half the imsg based daemons on my firewalls dont run anymore.
2009-06-07	Change the way fds passed over a socket are retreived on the receiving side.	Eric Faurot
	Currently the receiver fetches an imsg via imsg_get() and if he expects an fd, he then calls imsg_get_fd() to fetch the next fd queued on the imsgbuf from which the imsg came. This changes hides the fd queueing mechanism to the API user. When closing an imsg with an fd, the message is flagged so that the receiving end knows it must dequeue the fd in imsg_get() and return it with the imsg structure. This way there is no (less) possible screw up from imsg_get_fd() not being called directly after imsg_get() by the user. The retreived imsg is self-contained. ok pyr@, "I like that" henning@
2009-06-07	Make the imsg protocol network-safe.	Eric Faurot
	ok pyr@
2009-06-07	Initial documentation for the new stuff	Claudio Jeker

2009-06-07	First attempt at reload support for RIBs. There is some magic that I do	Claudio Jeker
	not fully understand but at least no flames are comming out of my test box anymore.
2009-06-06	change the imsg header fields a bit to prepare for upcoming changes.	Eric Faurot
	add a flag field, use u_int32_t for pid_t and extend type to 32 bits for padding. ok pyr@
2009-06-06	Reorder IMSG types to put the "exported" ones further down so they do not	Claudio Jeker
	change that often anymore.
2009-06-06	Fix bgpctl show rib prefix/len command. Problem reported by Insan Praja.	Claudio Jeker

2009-06-06	Get ready for including imsg.h from a lib, when it comes along.	Pierre-Yves Ritschard

2009-06-06	sync bgpd/bgpctl with the common imsg code, making it lib ready as well.	Eric Faurot
	ok claudio@ pyr@
2009-06-06	Make it possible to select the RIB that a show command should show.	Claudio Jeker

2009-06-06	Some preliminary filter magic to support multiple RIBs on the filters.	Claudio Jeker
	It is ugly but does the trick for now. Filters will be rewritten anyway. The rib specifier only makes sense on from rules. e.g. deny rib OMG from any
2009-06-06	Only the main Loc-RIB should update the FIB for now. So introduce a	Claudio Jeker
	F_RIB_NOFIB flag and apply it on all RIBs that are not F_RIB_NOEVALUATE.
2009-06-06	Only generate updates for peers that are member of the RIB that update is	Claudio Jeker
	comming from.
2009-06-06	Minor cleanup.	Claudio Jeker

2009-06-05	rtm->rtm_hdrlen conversion	Chris Cappuccio
	ok claudio@, henning@
2009-06-05	Don't call the main RIB DEFAULT but Loc-RIB. Makes more sense.	Claudio Jeker

2009-06-05	Adjust print_config to all the stuff added in the last days.	Claudio Jeker

2009-06-05	Make it possible to bind peers to a specified RIB. Now only filters and	Claudio Jeker
	bgpctl are missing to have full support of multiple RIBs.
2009-06-05	Change the way we do mrt dumps in the rde (from the retarded only one dump	Claudio Jeker
	possible to as many as you like). The mrt dumps are now done with the same tree walking code as the control messages. Makes the RDE respond a bit faster and use less memory while dumping.
2009-06-04	Make mrt understand alternate RIB plus remove some other static rib references.	Claudio Jeker
	There is still a problem with the mrt dumps because we only allow one in the RDE. This needs some additional work.
2009-06-04	Implement rib_find and add a rib id to struct rde_peer.	Claudio Jeker

2009-06-04	Export networks to be redistributed into all ribs for now.	Claudio Jeker

2009-06-04	Add "rde rib <name>" to the config and allow the rde to use these other RIBs.	Claudio Jeker
	Still a bit hackish, reload is missing and printconf as well. Looks good h@
2009-06-04	Document that we accept ASPLAIN format 32-bit ASN.	Stuart Henderson

2009-06-03	Allocate all rib contextes for tree walks and don't use static stack memory.	Claudio Jeker
	This will make interruptable walks a lot easier.
2009-06-03	Initial stab at rib_free() until now unused.	Claudio Jeker

2009-06-03	Better way to allocate new RIBs.	Claudio Jeker

2009-06-03	Make prefix_destroy more generic and use it in prefix_remove this is possible	Claudio Jeker
	because path_remove was changed to remove the prefixes in a slightly different way.
2009-06-02	Make show rib as and show rib community use the same dump code as the other	Claudio Jeker
	show rib commands. This makes the output sorted by prefix and not some rather randomly output.
2009-06-02	Move the rest of the rib dump functions into rde_rib.c where it belongs.	Claudio Jeker

2009-06-01	Use only one list to queue the dump contextes on. Use the list in struct	Claudio Jeker
	rib_context instead of the ctl specific rde_dump_ctx to make it more general.