| Age | Commit message (Collapse) | Author |
|---|
|
route. This happens when we learn from another router that a
directly attached link has a prefix for which we have no address
configured at the interface. In this case, we should do neighbor
discovery to directly reach the hosts with that prefix on the link.
ok claudio@
|
|
the interface index for writing routes into the kernel.
ok claudio@
|
|
the area of an ASE LSA is NULL.
ok claudio@
|
|
ok claudio@
|
|
and prevented dynamic route redistribution. Fix the logic bug that
was introduced during IPv4 to IPv6 conversion.
ok claudio@
|
|
an optional non link local forwarding address so we need to be a bit more
careful here. Problem found and analyzed by Martin Pelikán.
|
|
not devidable by 32. Problem found and identified by Martin Pelikán.
|
|
for IPsec. Avoid IPv6 fragments where possible. If a single LSA
is too big, put it into a separate packet with up to IPV6_MAXPACKET
bytes. This packet may get fragmented by the kernel.
ok stsp@
|
|
the ospf6d packet lenght calculation.
ok claudio@ stsp@
|
|
workaround it is better to drop this LSA with a log entry instead
of sending emtpy update packets in a burst. As link LSAs cannot
be split, the propper solution might be IPv6 fragments. See also
RFC5340 Section 4.4.3.8 and Appendix A.1.
ok stsp@
|
|
ok claudio@ stsp@
|
|
ok claudio@ stsp@
|
|
Minor bump for libutil.
Previous versions of this diff and man page looked at by various people.
"you should just commit" deraadt
|
|
ibuf, buf_read to ibuf_read, READ_BUF_SIZE to IBUF_READ_SIZE.
ok henning gilles claudio jacekm deraadt
|
|
more readable, and fixes a spacing bug we had in smtpd.8;
|
|
|
|
way the memory is zeroed. This is equivalent to the relayd commit by reyk.
OK reyk, jsg
|
|
ok eric
|
|
|
|
If this happens the imsg may no longer be usable as there may be queued
messages, but this is a) already the case with the code now, and b)
would be the case if recvmsg() fails anyway, so we can document that -1
from imsg_read() invalidates the struct imsgbuf.
discussed with and ok eric
|
|
Sync description of the OSPF protocol between ospfd(8) and ospf6d(8).
Document current shortcomings -- in particular, document that ospf6d(8)
needs manual IPsec setup for security. Clean up various grammatical errors,
re-order and re-phrase things a bit to improve readability.
Update RFC references. Remove IPv4-specific stuff from ospf6d.conf(5).
OK jmc@ claudio@
|
|
Appart from multi-area support this is the last big missing piece in
ospf6d. ospf6d should now work correctly in single area setups.
So please test.
"it's always nice to see those #if 0 being killed" stsp@
|
|
specified by type, adv_rtr and an LSA to compare against. This is needed
to find either a free LS ID or the previously assigned LS ID of an AS-ext
LSA. "looks like you know what you're doing" stsp@
|
|
latter are not realy tested. AS-ext LSA are now correctly added to the
RIB. "looks like you know what you're doing" stsp@
|
|
ls_id. This is needed since sometimes the ls_id is not known and we need
to walk part of the tree.
|
|
in these cases, is useless anyway.
Found by and fixing the build with mandoc;
still fine with both old and new groff.
ok jmc@
|
|
created a badly sized struct sockaddr_in6 we need to add some magic pading
on 64bit archs.
Code stolen from bgpd after a painful afternoon of bug hunting, head
scratching and violent cursing. Now ospf6d works on 64bit archs.
|
|
by lsa_asext_check().
|
|
Diff originally from stsp@, some minor modifications by me.
First step to support type 5 LSA.
|
|
aggregate, as mandated by RFC5340.
OK claudio@
|
|
From Christiano F. Haesbaert.
ok claudio@
|
|
state machine needed by the features that are coming along.
ok claudio@
|
|
which easily fits on the stack.
OK claudio@
|
|
address for so that the device is no considered unnumbered.
|
|
|
|
in almost all sockaddr_in6 addresses it is required for the nexthop and
sin6_scope_id is actually ignored there.
This needs to be fixed but my quota of IPv6 insanity is already used for today.
Workaround for now. My simple testsetup is now actually able to install
the first ospf6d learned routes in the kernel. Weeee!
|
|
this information to kroute and kroute can use that information to fill in
the various sin6_scope_id fields.
|
|
definitions so that we have a chance to build a correct nexthop.
Insane that a struct in6_addr is unable to fully specify an IPv6 address.
kroute.c still needs fixing but now the rib is starting to make sense.
|
|
again but different because of link local addressing.
|
|
interface id of the remote side. Found the hard way.
|
|
We need to pass our ifindex so that we can find the Link-LSA that has the
link local address stored for that router. Don't we all like IPv6 link local
addresses and their insanity.
|
|
|
|
|
|
|
|
`OK' claudio
|
|
henning, sthen, michele like the idea
|
|
few remaining ".Tn UNIX" macros with ".Ux" ones.
pointed out by ratchov@, thanks!
ok jmc@
|
|
ok jmc@
|
|
in an error path.
|
|
loop in the shutdown case. OK henning@
|
