summaryrefslogtreecommitdiff
path: root/usr.sbin/ospfd
AgeCommit message (Collapse)Author
2007-01-29Remove useless debug message when calculating the SPF tree.Esben Norby
ok claudio@
2007-01-29Do not link from the LS DB to outside structures that may vanish beforeClaudio Jeker
the actual LS DB entry is removed. In particular a neighbor may be removed at any time -- we were lucky because we kept down neighbors around for another 24h. Reload support unhided this problem again. Just copy the needed info into the vertex. Pointing to the area is save as the vertex is part of the area itself and removed when the area is removed. OK norby@
2007-01-24When deleting a neighbor or a interface make sure that no events are pending.Claudio Jeker
Needed for reload support. OK norby@
2007-01-24Remove most of the spf calculation related log_debug messages.Claudio Jeker
2007-01-24Remove some log_debug()s that are no longer needed.Claudio Jeker
2007-01-23Typo in fatal() message found by dunceor @ gmail dot comClaudio Jeker
2007-01-20Ignore SIGPIPE in the parent and RDE as well.Claudio Jeker
2007-01-14typoMichele Marchetto
metricr -> metric
2007-01-11Silently ignore unknown neighbors in the rde and ospfe imsg handler. ThisClaudio Jeker
is needed for upcomming reload support -- it can happen that a message to a just deleted neighbor is still pending.
2007-01-11Join two lines.Claudio Jeker
2007-01-11Remove unneeded config stuff when booting up the RDE. This makes the reloadClaudio Jeker
handling a bit easier.
2007-01-08term 3 here can be dropped tooTheo de Raadt
2006-12-21Unbreak redistribute default and make it possible to specify a metric forClaudio Jeker
the default route as well. OK norby@, michele@
2006-12-21order variables by size/type.Claudio Jeker
2006-12-13Doh! I forgot the change from kroute to rroute in the deletion case.Claudio Jeker
Found by Armin Wolfermann
2006-12-13Correct funtion name in fatal message.Claudio Jeker
2006-12-08Fix a crash seen on busy area border routers. The problem was a NULLClaudio Jeker
dereference in rde_summary_update(). Even though we merge in the new LSA it may be suppressed because the remove happened less than 5 seconds ago. So the second lsa_find() is still unable to locate the LSA and in this case we may not access v->cost. Additionally only remove not yet deleted LSA in lsa_remove_invalid_sums(), removing already removed entries removes also the suppressed LSAs. Problem found and fix tested by Pierre-Yves Ritschard. OK norby@
2006-12-08Document redistribute set options. OK norby@Claudio Jeker
2006-12-08Document the interface:ip syntax and add some statements to the examplesClaudio Jeker
to make them useful. OK norby@
2006-12-07Make it possible to set the metric and LSA type for redistributed routes.Claudio Jeker
Mostly based on a diff by Pierre-Yves Ritschard (I just simplified the parser code). OK norby@
2006-11-28add additional link states to report the half duplex / full duplexReyk Floeter
state, if known by the driver. this is required to check the full duplex state without depending on the ifmedia ioctl which can't be called in the kernel without process context. ok henning@, brad@
2006-11-28mib we pass to sysctl when fetching the routing table has 7 entries now,Henning Brauer
not 6 any more (rtableid added). need to tell sysctl so.
2006-11-26repair missing DPADD requestsTheo de Raadt
2006-11-17Support for multiple networks on one interface. Until now only the mainClaudio Jeker
address of a interface could be used. Now it is possible to specify a interface more than once if multiple networks are configured. An alternative network can be specified via e.g. interface em0:10.0.5.1. The old interface syntax without the IP still works and uses the main/first configured IP address. ospfd now needs to include the IP header on outgoing messages as it is not possible to specifiy the source address in sendto(2). Additionally all multicast joins and leaves have to be tracked. OK norby@
2006-11-16ignore routing messages for alternate tables for now, from bgpdHenning Brauer
2006-11-09Properly indicate the state of "fib-update"Joel Knight
ok claudio@
2006-11-01Fix copy pasto, use SIGCHLD for the sigchild handler not SIGINT twice.Claudio Jeker
Spotted by janus <at> errornet.de
2006-10-29Allow braces to fit on a single line if only one or no argument is used.Claudio Jeker
This allows construct like these: area 0.0.0.1 { interface lo0 interface em1 { passive } } From Pierre-Yves Ritschard
2006-10-25Remove a parser debug functionality that was never used in ospfd.Claudio Jeker
From Pierre-Yves Ritschard
2006-10-25Use strtonum(3) instead of the hand made atoul. This solves an issue withClaudio Jeker
possible integer truncation because of the use of u_longs and u_int32_t in the code. Initial diff by Pierre-Yves Ritschard but slightly modified version commited.
2006-09-27Use IP_RECVIF to get the incomming interface of OSPF packets. Now we useClaudio Jeker
the source address and the interface index to find the corresponding struct interface which is less error prone. OK norby@
2006-09-26Sync in_cksum.c to the same version dvmrpd has. This fixes problems with oddClaudio Jeker
packet lenght even though ospfd does not produce such packets. OK norby@
2006-08-31knock out the cpp/m4 stuff from MACROS; after discussion with many...Jason McIntyre
2006-08-30Remove useless logging, the logged event happens all the time, no need toEsben Norby
spam the logs. ok claudio@ deraadt@
2006-08-28use Forwarding Information Base vs. Forward Information Base;Kevin Steves
ok jmc@ claudio@
2006-08-28.Xr sysctl 8; wording from jmc@Kevin Steves
2006-08-28tiny grammar fix; ok jmc@Kevin Steves
2006-08-18Correctly leave the all AllDRouters group (224.0.0.6) if the interface wasClaudio Jeker
in state DR or BACKUP. Found while analizing PR5192 with norby@ -- seems to help but there is still a issue left. OK norby@
2006-08-06Remove a XXX in a comment.Claudio Jeker
2006-08-06There is no need to initialize the log framework twice. Especially becauseClaudio Jeker
between the two calls no logging can happen.
2006-07-06In rt_invalidate() skip all as_ext routes if routes matching a specific areaClaudio Jeker
are invalidated. as_ext routes have a uninitalised area id (aka 0.0.0.0) and so bad stuff happend when area 0.0.0.0 was invalidated. Because of this the FIB and RIB got out of sync in some scenarios.
2006-07-03Add missing breaks and suddenly all starts to make sense again. WonderedClaudio Jeker
why one of my boxes started to redistribute all my bgpd routes into ospf.
2006-06-28Track the uptime of the ospfd daemon itself.Esben Norby
It is possible to read the uptime of the daemon with the "ospfctl show" command. ok claudio@
2006-06-02remove unused variable, found by lint.Esben Norby
2006-06-01Document all the new and shiny redistribute options. With a lot of help fromClaudio Jeker
jmc@
2006-05-31Support for "[no] redistribute 10.6/16", all routes that match into thisClaudio Jeker
range will match this "rule". This should be it, now it is time to write some documentation.
2006-05-31More redistribute fun. Add a possibility to deny redistribution of specifiedClaudio Jeker
routes via "no redistribute rtlabel admin". Redistribute rules are parsed in order and the first match is used. Only exception is "redistribute default" Which is independent of the other rules and can't be negated.
2006-05-31Plug memory leak; ok claudio@Patrick Latifi
2006-05-30Correctly calculate point-to-point nexthop address. The logic was badly twistedClaudio Jeker
but funnily worked for routers with just one point-to-point link. Found by Marc Winiger. OK norby@
2006-05-30Uups, this file should be commited with the redistribute rtlabel stuff.Claudio Jeker
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 20:08:21 +0000