summaryrefslogtreecommitdiff
path: root/usr.sbin/ppp
AgeCommit message (Collapse)Author
1998-03-16Cosmetic: .Dq -> .Itbrian
1998-03-13Correct #ifdef for __FreeBSD__ < 3brian
1998-03-13Add missing includebrian
1998-03-13Add extraneous braces to stiffle warnings from gcc-2.8brian
1998-03-13Don't send LQRs when the peer has LCP REJ'd them. Sendbrian
ECHO LQRs instead.
1998-03-12o Fix a few comment typos.brian
o Fix ``set timeout'' usage message and documentation. o Change ifOutPackets, ifOutOctets and ifOutLQRs to `u_int32_t's so that they wrap correctly. o Put the LQR in network byte order using the correct struct size (sizeof u_int32_t, not sizeof u_long). o Wrap LQR ECHO counters correctly. o Don't increment OutLQR count if the last LQR hasn't been replied to. o Initialise HisLqrData (last received LQR) in StartLqm. o Don't start the LQR timer if we're `disabled' and `accepted'. o Generate LQR responses when both sides are using a timer and we're not going to send our next LQR before the peers max timeout. LQR should now be fully functional.
1998-03-08Please gcc 2.8brian
1998-03-06Use the correct device name in -direct mode.brian
1998-02-19Allow 8 character login names.brian
Pointed out by: Forgotten Do the login()/logwtmp()/logout() as id 0.
1998-02-18LogWARN rather than LogERROR when we can't createbrian
our diagnostic socket.
1998-02-18Don't leak memory when the peer sends PROTO_COMPD packetsbrian
without negotiating compression first.
1998-02-11Move handle_signals() to before the FD_SETs. handle_signals()brian
may result in a our modem closing after it's made its way into the fd_set, resulting in a program exit (with select(): bad file descriptor) rather than a dropped link.
1998-02-04Correct magic number format stringbrian
Spotted by: Bruce M. Walter <walter@fortean.com>
1998-01-29Talk about ongoing development.brian
1998-01-29Don't moan about not creating tunX.pid and ttyX.if if RELEASE_CRUNCHbrian
is defined.
1998-01-29Cosmetic:brian
Don't mention the authors name at startup. He's already credited in the man page. Instead, make the message consistent with the one given to the diagnostic port (and fix the grammar when entering `term' mode). Don't credit the zlib author in the man page as ppp isn't linked directly with zlib (it's shared). Mention when the OpenBSD port was first made available.
1998-01-24Fix error message.brian
Don't complicate the test compilation mentioned at the start of the file.
1998-01-23Stop bogus warnings.brian
1998-01-23Re-implement the proxy arp sockaddr_dl search routine (again).brian
It now works :-) and searches all interface aliases.
1998-01-23Don't allow manual dialing unless in auto or interactive mode.brian
1998-01-21Use the sockaddr_dl with the link#, not the ethernet addressbrian
when creating proxy arp entries.
1998-01-21Remove unused #includes.brian
Make various bits static. Remove unused variables. Submitted by: eivind
1998-01-20Allow an optional delay when specifying "set openmode active".brian
The delay defaults to 1 sec (as it always has) unless we've done a ~p in interactive mode or we've actually detected a HDLC frame. This is now cleanly implemented (via async timers) so that it is possible for LCP to come up despite the delay if an LCP REQ is received. This will hopefully solve situations with slow servers or slirp scenarios (where ECHO is left on the port for a second or so before the peer enters packet mode). Also, ~p in interactive mode no longer changes the value of the default openmode delay and -dedicated mode enters packet mode in the right state according to the value of openmode.
1998-01-19dlopen(..., RTLD_NOW) rather than RTLD_LAZY.brian
Pointed out by: John Polstra <jdp@polstra.com>
1998-01-19sys/types.h -> sys/param.hbrian
Pointed out by: Niklas Hallqvist <niklas@petra.appli.se>
1998-01-19Reimplement proxy-arp address stuff using sysctl().brian
1998-01-18Allow "set vj" for changing the default number of slotsbrian
and whether slot compression is requested. Don't show current values with "show ipcp" if IPCP isn't "opened".
1998-01-14Free our input mbuf when the FCS is good (oops, memory leak).brian
1998-01-14Lose __libalias_version.brian
We now look for the biggest of libalias.so.2.*
1998-01-11Lose <net/if_var.h> (was a FreeBSD brokenness) !brian
1998-01-11Make things work when sizeof(long) != 32 (hopefully)brian
1998-01-11Remember any number of interface names.brian
1998-01-11Remove includes of if_var.h and in_var.hbrian
1998-01-11Allow 6 byte interface names (for >tun99)brian
1998-01-10Pause according to the redial setting when dialing manually.brian
Pointed out by: Berend de Boer <berend@compuserve.com>
1998-01-10Implement Reset{Req,Ack} properly, as per rfc 1962.brian
(I completely mis-read the rfc last time 'round!) This means: o Better CCP/WARN Reset diagnostics. o After we've sent a REQ and before we've received an ACK, we drop incoming compressed data and send another REQ. o Before sending an ACK, re-sequence all pending PRI_NORMAL data in the modem queue so that pending packets won't get to the peer *after* the ResetAck. o Send ACKs with the `identifier' from the REQ frame. o After we've received a correct ACK, duplicate ACKs are ok (and will reset our history). o Incorrect ACKs (not matching the last REQ) are moaned about and dropped. Also, o Calculate the correct FCS after compressing a packet. DEFLATE *may* produce an mbuf with more than a single link in the chain, but HdlcOutput didn't know how to calculate the FCS :-( o Make `struct fsm'::reqid a u_char, not an int. This fix will prevent us from sending id `255' 2,000,000,000 times before wrapping to `0' for another 2,000,000,000 sends :-/ o Bump the version number a little (it should already have been at 1.6). The end result: DEFLATE now works over an unreliable link layer. I can txfr a 1.5Mb kernel over a (rather bad) null-modem cable at an average of 21679 bytes per second using rcp. Repeat after me: Don't test compression using a loopback ppp/tcp setup as we never lose packets and therefore never have to reset!
1998-01-08Zap any addresses on the network side of the `tun' as soonbrian
as we've successfully opened the /dev side.
1998-01-06Correct the return value of ReportProtStatus() ("show proto").brian
Submitted by: Dave Bodenstab <imdave@mcs.net>
1998-01-05o Allow the use of HISADDR as the first arg to "add".brian
o Allow a forth argument in ppp.secret, specifying a new label. This gives control over which section of ppp.link{up,down} is used based on the authenticated user. o Support random address ranges in ppp.secret (not just in ppp.conf). o Add a AUTHENTICATING INCOMING CONNECTIONS section to the man page. o Add a bit more about DEFLATE in the man page. o Fix the incorrect "you must specify a password in interactive mode" bit of the manual. o Space things in the man page consistently. o Be more precice about where you can use MYADDR, HISADDR and INTERFACE in the "add" command documentation.
1998-01-04Make it clear that using "add ...." in ppp.conf whenbrian
not in -auto mode isn't a good idea, and that the add should be done in ppp.linkup instead. Change "add 0 0 HISADDR" to "add default HISADDR". It's more intuitive.
1998-01-04Don't scribble on the stack if our input packet isbrian
bigger than our MRU. Moan and drop the packet instead.
1998-01-04Initialize CcpInfo protocols to -1 (none, not OUI).brian
Don't Call Term() for an algorithm that hasn't been Init()d.
1997-12-30Allow "set device" to close the open modem if we're inbrian
interactive mode. Use `netfd' in fcntl() and tc[gs]etattr() calls rather than the hard coded descriptor 0. Use _FILENO constants from unistd.h This un-breaks things after my recent `close(0)' in interactive mode. Close STDIN_FILENO, and open _PATH_TTY O_RDONLY as `netfd'. This has the effect of allowing `show route' to output more than about a page of data (on FreeBSD, not OpenBSD....). I have no idea why, except that it was a direct consequence of the tcsetattr() in TtyCommandMode(). My previous fix (closing descriptor 0) `fixed' this because all calls to tcsetattr() failed :-(
1997-12-30Typo in error message.brian
1997-12-30Use inet_aton() before gethostbyname()brian
Suggested by: Christian Sandberg <christian@yes.no> Eivind Eklund <perhaps@yes.no>
1997-12-30Allow "add! dst mask gw" (note the ``!'') to do anbrian
RTM_CHANGE if the RTM_ADD fails with an EEXIST. Allow "delete! dst" (note the ``!'') to silently fail if the RTM_DELETE fails with an ESRCH. Also, make the ESRCH and EEXIST error conditions more understandable to the casual observer.
1997-12-29Don't complain that someone's changed the clock unless the timebrian
after a select() interrupt is more than 1 second past what should have been the end time. We may just be running on an over-burdened machine.
1997-12-29Show how much time is left before timing out in thebrian
`show timeout' output. Remove ipIdleSecs variable - it's not used.
1997-12-28Don't expect select() to adjust the passed time when it'sbrian
interrupted with a SIGALRM. In fact, select() sets the passed time to zero, making the previous implementation terminate always after 1/10th of a second ! Also, deal with someone changing the clock while we're sleeping (and restart the whole sleep). Dangers pointed out by: Theo de Raadt <deraadt@cvs.openbsd.org>
1997-12-28Initialize mbuf::pnext.brian
Complain to LogERROR if we have internal inconsistency (not LogDEBUG).
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-03 21:18:02 +0000