Age | Commit message (Collapse) | Author | |
---|---|---|---|
2005-09-26 | If setting the filter fails, pass the error back; | Otto Moerbeek | |
ok deraadt@ | |||
2005-09-24 | - add auth_type and auth_keyid to struct ctl_iface | Mathieu Sauve-Frankel | |
- have ospfctl tell us when we are using authentication with 'show interface' ok claudio@ norby@ | |||
2005-09-24 | Add some code to just build the packing-list even if the package won't | Marc Espie | |
happen. Use -q and -Q for now, may change. | |||
2005-09-24 | give it a bit highr priority and exit w/ failure if systcl ever fails; marc@ ↵ | Michael Shalayeff | |
henning@ ok some time ago... | |||
2005-09-24 | pass actual items to prepare_long and check_name so that we can also | Marc Espie | |
verify that modes/groups/owners are correct (code to come) | |||
2005-09-24 | move uname/gname existence check into ArcCheck: Ustar archives deal with | Marc Espie | |
this differently. Namely, use specific variables that default to the numeric value if the uid/gid don't exist in mkheader. Since the entry fields are not filled, ArcCheck gets all it needs for the package check. | |||
2005-09-24 | Allows FETCH_CMD to replace ftp. | Marc Espie | |
Note that, for simplicity, FETCH_CMD must be a single command with a full path. Use a script if you must. | |||
2005-09-24 | mention marking of logs that have wrapped their buffer, from stevesk@ | Damien Miller | |
2005-09-24 | Log source address for 'malformed packet' errors. ok henning@ | Darren Tucker | |
2005-09-23 | Only allow root to run tcpdump. It's needed for the chroot security. | Otto Moerbeek | |
ok moritz@ deraadt@ | |||
2005-09-23 | default port for ftp-proxy is 8021; | Jason McIntyre | |
from johnb (pr #4520); ok deraadt@ ian@ | |||
2005-09-22 | boot-able -> bootable (typo fix in comments only) | Jason McIntyre | |
from janne johansson (pr #4516) | |||
2005-09-22 | consistency fixes, spotted by brian at awfulhak org; | Jason McIntyre | |
2005-09-22 | add missing phrase; | Jason McIntyre | |
ok brad@ | |||
2005-09-22 | add a few flags to CDIAGFLAGS | Brad Smith | |
2005-09-21 | rearrange sanity checks to eliminate signed arithmatic, from stevesk@ | Damien Miller | |
2005-09-21 | grammar, spelling, formatting fixes... | Jason McIntyre | |
2005-09-21 | Added some missing defines. | Brad Smith | |
From ru FreeBSD | |||
2005-09-21 | Add a radius_Flush() function that waits for the response (or timeout) to | Brad Smith | |
any pending RADIUS transaction. Use this before sending RAD_STOP RADIUS messages so that we definitely ``stop'' the session. It was discovered that sometimes when the link timed out, we got lucky enough to have an un-ACK'd RADIUS accounting transaction in progress, resulting in the RAD_STOP message failing to send. From brian FreeBSD | |||
2005-09-21 | Support a ``set rad_alive N'' command to enable periodic RADIUS accounting | Brad Smith | |
information being sent to the RADIUS server. Logging of RADIUS accounting information moves to a ``set log [+-]radius'' level, along with the RADIUS alive info. From brian FreeBSD | |||
2005-09-21 | Send NAS-IP-Address as well as NAS-Identifier | Brad Smith | |
Add ``disable NAS-IP-Address'' and ``disable NAS-Identifier'' options to support pre-rfc2865 RADIUS servers. This pushes our enable/disable items over the 32 bit limit, so reoganise things to allow a bunch more options. From brian FreeBSD | |||
2005-09-21 | Avoid casts as lvalues. | Brad Smith | |
From kan FreeBSD | |||
2005-09-21 | If HISMACADDR is set in the environment, pass the value to | Brad Smith | |
the RADIUS server as RAD_CALLING_STATION_ID. From brian FreeBSD | |||
2005-09-21 | Send RADIUS gigaword data when OctetsIn or OctetsOut go over UINT32_MAX. | Brad Smith | |
From dds FreeBSD | |||
2005-09-21 | Make sure that "updates" with only MP withdraws (MP_UNREACH_NRLI) stop | Claudio Jeker | |
processing after the MP withdraw block. OK henning@ | |||
2005-09-21 | when the route to a nexthop is a reject or blackhole route, the nexthop | Henning Brauer | |
is invalid. add check for these flags. shows up with v6, many reject routes there. claudio ok | |||
2005-09-21 | IPSec -> IPsec | Jason McIntyre | |
grammar from joel@ | |||
2005-09-21 | uppercase first letter of a sentence; | Jason McIntyre | |
2005-09-21 | name union. | Brad Smith | |
From ume FreeBSD | |||
2005-09-21 | IPV6PREFIX is set when Framed-IPv6-Prefix is defined, You may | Brad Smith | |
want to pass the value to upper layer protocol such as DHCPv6 for prefix delegation. From ume FreeBSD | |||
2005-09-21 | Do RADIUS accounting on IPV6CP. | Brad Smith | |
From ume FreeBSD | |||
2005-09-21 | Install routes specified by Framed-IPv6-Route. Since the format | Brad Smith | |
of Framed-IPv6-Route is user defined, it follows Framed-IP-route. From ume FreeBSD | |||
2005-09-21 | Add IPv6 related attributes defined in RFC3162. | Brad Smith | |
From ume FreeBSD | |||
2005-09-20 | refuse building archive if we don't have user names for the uids. | Marc Espie | |
2005-09-20 | allow "show rib" to be limited to an address family too | Henning Brauer | |
2005-09-20 | don't try to print v6 nexthops as v4 address | Henning Brauer | |
2005-09-20 | for consistency, make "show network" and alias for "network show" | Henning Brauer | |
2005-09-20 | allow the "show network" output to be limited to a given address family | Henning Brauer | |
2005-09-20 | let "bgpctl network show" print v6 addresses correctly | Henning Brauer | |
2005-09-19 | zap unused header and #defines, mostly from stevesk@ | Damien Miller | |
2005-09-19 | Since ppp.link{up,down} is invoked at the end of IPCP negotiation, if | Brad Smith | |
we need ppp.link{up,down}, we couldn't disable IPCP. Now, if IPCP is disabled, ppp.link{up,down} is invoked at the end of IPV6CP negotiation. From FreeBSD | |||
2005-09-19 | rev 1.8 | Brad Smith | |
made ppp compliant to RFC 2472 (based on a patch from another contributor) rev 1.10 Once ppp session is over, the route to ff02::tun0/32 was deleted, and never came back. Now, the route to ff02::tun0/32 is installed at the end of IPV6CP negitiaton. From FreeBSD Tested by aanriot@ and a few end-users | |||
2005-09-19 | implement fast reconnects | Henning Brauer | |
when a peer drops to IDLE, we have to force him in IDLE for some time to prevent fast flapping. however, the forced idle time is annoying when the connection could be re-established immediately, i. e. bgpctl nei $peer clear or similar. implement an error counter per peer, increased every time we receive a notification. when we are in state IDLE and get a connection from the peer in question, check if the error counter is 1 or smaller. if so, change state to active and accept the connection, otherwise keep the current behaviour and reject the connection. the error counter gets scaled back by the IdleHoldResetTimer that scales the IdleHoldTime back as well | |||
2005-09-19 | KNF | Henning Brauer | |
2005-09-19 | use $handle->plist() | Marc Espie | |
2005-09-19 | simplify pkg_info a great deal, by relying on the lazy properties of | Marc Espie | |
pkghandles to avoid creating directories. Use PackageRepository::Installed to make code symetric. | |||
2005-09-19 | fix PackageRepository::Installed(). | Marc Espie | |
let grabPlist finish closing what it opened. | |||
2005-09-19 | OpenBSD::PackingList is in section 3p. | Bernd Ahlers | |
ok espie@ | |||
2005-09-19 | let pkg_info -e see @pkgpath annotations. | Marc Espie | |
Solves update issues where the pkgpath changed | |||
2005-09-19 | Let ExtraInfoOnly grab pkgpath as well. | Marc Espie | |