src - OpenBSD base system

Age	Commit message (Collapse)	Author
1999-04-21	seperate -> separate, people really need to learn how to spell this word	Aaron Campbell

1999-04-21	Don't display the string associated with errno for "basedir too long"	Alex Feldman
	diagnostic. Issue a diagnostic message if the master.passwd file isn't specified as an absolute path.
1999-04-21	int -> size_t	brian

1999-04-21	Split the recorded chap challenge into two - one for the	brian
	receiver and one for the sender. This allows two simultaneous chap conversations - something that I thought I was already doing on a daily basis myself until the existence of the problem was Beaten into me by: sos@FreeBSD.org
1999-04-21	If ioctl TIOCMGET fails, continue. The device may be	brian
	a pseudo device created by an interactive version of rlogin/telnet/ssh & friends
1999-04-19	Escape stuff in the peers accmap as well as our own when async	brian
	encoding, and back out the negotiation strategy that didn't quite have the right effect with some (bad?) ppp implementations. Drop unexpected PAP/CHAP packets (if not in NETWORK or ESTABLISH phase). Make sure that we enter PHASE_ESTABLISH when we need to. Detect HDLC frames correctly, not just when the whole header is obtained by a single read(). Don't convert \r\n to \r\r\n in tty raw mode. Use the correct macros for `', ``'', () and [].
1999-04-18	Make -W -Wall happier.	Marc Espie
	Classical modern C type-checking, signed vs. unsigned.
1999-04-18	Document -v	Marc Espie
	Give more precise error messages in case of failure
1999-04-11	Introduce net.inet.{ah,esp}.enable sysctl controls that are off by default.	Niklas Hallqvist
	If you are going to use either of AH or ESP or both, enable these in /etc/sysctl.conf. Also correct the IPSec debugging sysctl code, it is now named net.inet.ip.encdebug. Some corrected function signatures too.
1999-04-09	The userland parts of a sysctl that can switch on/off IP-in-IP (protocol 4)	Niklas Hallqvist

1999-04-02	all .Nm macros should have an argument in SYNOPSIS; also misc cleanup	Aaron Campbell

1999-03-31	Avoid a few warnings on the alpha	brian

1999-03-31	Oops - remove register keyword	brian

1999-03-31	Another alignment bogon.	brian

1999-03-31	name default if, plus another bug; garath@ntplx.net	Theo de Raadt

1999-03-31	more examples	Jason Wright

1999-03-30	Point at cs.slcs_u.csu_ip instead of the just-copied ``cp''	brian
	when recalculating the ip checksum. cp is not guaranteed to be aligned. It now doesn't matter that cp isn't aligned as the caller does another mbuf_Alloc() regardless.
1999-03-30	Maintain a `necessary' marker to indicate that we probably	brian
	need to process a signal (usually a SIGALRM). Check to see if we need to process a signal both before and after calling select() as older (pre-2.0) versions of ppp used to. This handles the possibility that ppp may block at some point (maybe due to an open() of a misconfigured device). Previously, we'd potentially lock up in select(). The `necessary' marker reduces the increased signal checking overhead so that at full speed with no compression transferring an 83Mb file via a ``!ppp -direct'' device, we get a 1% throughput gain.
1999-03-29	Only print "already up to date" if in verbose mode	Todd C. Miller

1999-03-29	If we adjust our required ACCMAP due to a more restrictive	brian
	ACCMAP being REQuested by the peer, also increment our FSM id so that we don't end up sending out a new REQ with the same ID and different data (the changed ACCMAP).
1999-03-29	Ensure that the thing we're casting to struct ip	brian
	is aligned for non-i386 architectures.
1999-03-27	Upgrade to 2.5.4. Mopprobe is working again, and some linux support. -moj	Mats O Jansson

1999-03-25	Allow port ranges in ``alias port''.	brian

1999-03-25	Undo possible damage done by the new TUNSIFMODE ioctl	brian
	in FreeBSD-current.
1999-03-24	Remove duplicate line; FreeBSD	brian

1999-03-24	Add a ``const'' and remove some inconsistent prototype args.	brian

1999-03-24	Only exit in nlist.c due to a memory error, otherwise just return. A return ↵	Todd C. Miller
	value of 1 indicates an incorrect executable type, a return value of -1 indicates some other problem. This gives us better fallback from /dev/ksyms to /bsd.
1999-03-24	Better fallback from /dev/ksyms to /bsd if there are problems with an nlist ↵	Todd C. Miller
	of /dev/ksyms
1999-03-23	never spit out two error messages, it is bad style	Theo de Raadt

1999-03-22	set default if to something more reasonable; fix SIGSEGV when no options ↵	Theo de Raadt
	listed; garath@ntplx.net
1999-03-19	Add flag to allow some interfaces to not see packets with unknown destination.	Jason Wright

1999-03-19	Do away with some literal text that is never switched	brian
	off - I think these were groff bugs.
1999-03-19	Add the ability to mark an interface as "non-learning"	Jason Wright

1999-03-19	Replace hardcoded quoting with Sq or Dq.	brian

1999-03-19	Don't forget to fully initialise the configured values	brian
	for MYADDR and HISADDR in ``set ifaddr'' so that unspecified values don't end up retaining their `width'.
1999-03-18	Use ``Sx'' when xref'ing sections.	brian

1999-03-18	Remove all remaining [ and ] characters (and do things properly).	brian

1999-03-17	i386, sparc, hp300 not vax, tahoe, hp300	Todd C. Miller

1999-03-17	Remove all hardcoded [...] syntax.	brian
	With help from: Daniel C. Sobral <dcs@newsguy.com>
1999-03-16	Mention changes to the default authentication behaviour.	brian

1999-03-16	Detect pred1 packets where the length != the packet length	brian
	Use a maximum of MAX_MRU + 2 bytes for incoming packets, not MAX_MTU + 2. Tidy up some diagnostics.
1999-03-13	proper URL for fetching package; evanc@concer.to	Theo de Raadt

1999-03-12	fix usage	Theo de Raadt

1999-03-12	userdir off by default, damnit	Theo de Raadt

1999-03-12	cleanup	Aaron Campbell

1999-03-12	big overhaul:	Jason Wright
	o SNAP encapsulated IP filtering o static address cache entries o address deletion from cache o dynamic & full cache flush o filter packets based on each interface, not on the bridge as a whole o KNF nits o allow addition of ~IFF_UP interfaces o man page & user level fixes to match the above
1999-03-11	cleanup	Aaron Campbell

1999-03-11	cleanup	Aaron Campbell

1999-03-11	cleanup	Aaron Campbell

1999-03-11	Tone down the log levels (Log{ERROR,WARN} -> LogCCP)	brian
	when we've simply missed a packet. When our Predictor1 CRC is wrong (implying we've dropped a packet), don't send a ResetReq(). Instead, send another CCP ConfigReq(). shrug My tests show this as being far worse than the ResetReq as we may have further Nak/Rejs etc and we're basically resetting both our incoming and outgoing compression dictionaries, but rfc1978 says the ConfigReq is correct, so we'd better go along...