From 063cfa54c7c9ad7a987e3d2938862e39c635f6b7 Mon Sep 17 00:00:00 2001 From: Janne Johansson Date: Thu, 17 May 2001 08:41:09 +0000 Subject: Only amiga install docs had the word "harddisk" in one word. Changed. Also, replace "scsi controller" with "hard disk controller" since it could in theory be an IDE controller. --- distrib/notes/amiga/prep | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/distrib/notes/amiga/prep b/distrib/notes/amiga/prep index 6456d205abf..8a16e64f4e7 100644 --- a/distrib/notes/amiga/prep +++ b/distrib/notes/amiga/prep @@ -5,9 +5,9 @@ of AmigaDOS so we will provide instructions for its use. Preparing your hard disk with HDToolBox: - If you intend to use a harddisk larger than 4 Gb, or partitions + If you intend to use a hard disk larger than 4 Gb, or partitions larger than 2Gb be advised to either get HDToolBox for AmigaDOS 3.5 - or a third party harddisk preparation tool (such as HdInstTools) + or a third party hard disk preparation tool (such as HdInstTools) from Aminet, together with the appropriate patches from www.amiga.com to let AmigaDOS see the full size of the drive. @@ -40,8 +40,8 @@ Preparing your hard disk with HDToolBox: This should be done as the HDToolBox manual describes. One thing to note is that if you are not using a Commodore controller you - will need to specify the device your SCSI controller uses e.g. - if you have a Warp Engine you would: + will need to specify the device your hard disk controller uses + e.g. if you have a Warp Engine you would: from cli, hdtoolbox warpdrive.device -- cgit v1.2.3