From 8448eb08833ff433c4be90f418209a80b2bbbdc6 Mon Sep 17 00:00:00 2001
From: Kenneth R Westerback <krw@cvs.openbsd.org>
Date: Sat, 26 Jun 2004 20:10:18 +0000
Subject: Allow change of default console to first serial device during
 install. Used in i386 only at this time.

ok beck@ deraadt@
---
 distrib/i386/common/install.md |  4 ++-
 distrib/miniroot/install.sh    |  4 +--
 distrib/miniroot/install.sub   | 63 ++++++++++++++++++++++++++++++++----------
 3 files changed, 53 insertions(+), 18 deletions(-)

diff --git a/distrib/i386/common/install.md b/distrib/i386/common/install.md
index bb1ab8c9710..158ee9629bc 100644
--- a/distrib/i386/common/install.md
+++ b/distrib/i386/common/install.md
@@ -1,4 +1,4 @@
-#	$OpenBSD: install.md,v 1.22 2004/03/03 02:19:26 krw Exp $
+#	$OpenBSD: install.md,v 1.23 2004/06/26 20:10:17 krw Exp $
 #
 #
 # Copyright (c) 1996 The NetBSD Foundation, Inc.
@@ -42,6 +42,8 @@
 MDFSTYPE=msdos
 MDFSOPTS=-s
 MDXAPERTURE=2
+MDSERIAL="pccom com tty0"
+
 ARCH=ARCH
 
 md_set_term() {
diff --git a/distrib/miniroot/install.sh b/distrib/miniroot/install.sh
index e619fcd5227..468b3af99cb 100644
--- a/distrib/miniroot/install.sh
+++ b/distrib/miniroot/install.sh
@@ -1,5 +1,5 @@
 #!/bin/sh
-#	$OpenBSD: install.sh,v 1.143 2004/05/28 22:59:34 krw Exp $
+#	$OpenBSD: install.sh,v 1.144 2004/06/26 20:10:17 krw Exp $
 #	$NetBSD: install.sh,v 1.5.2.8 1996/08/27 18:15:05 gwr Exp $
 #
 # Copyright (c) 1997-2004 Todd Miller, Theo de Raadt, Ken Westerback
@@ -411,7 +411,7 @@ save_comments dhclient.conf
 # Possible files: fstab, kbdtype, myname, mygate, sysctl.conf
 #                 dhclient.conf resolv.conf resolv.conf.tail
 #		  hostname.* hosts
-for _f in fstab kbdtype my* *.conf *.tail host*; do
+for _f in fstab kbdtype my* *.conf *.tail host* ttys; do
 	[[ -f $_f ]] && mv $_f /mnt/etc/.
 done )
 
diff --git a/distrib/miniroot/install.sub b/distrib/miniroot/install.sub
index f4380461277..7b33f9ed44f 100644
--- a/distrib/miniroot/install.sub
+++ b/distrib/miniroot/install.sub
@@ -1,4 +1,4 @@
-#	$OpenBSD: install.sub,v 1.342 2004/06/22 20:43:58 krw Exp $
+#	$OpenBSD: install.sub,v 1.343 2004/06/26 20:10:17 krw Exp $
 #	$NetBSD: install.sub,v 1.5.2.8 1996/09/02 23:25:02 pk Exp $
 #
 # Copyright (c) 1997-2004 Todd Miller, Theo de Raadt, Ken Westerback
@@ -171,6 +171,22 @@ get_ifdevs() {
 	    | sed -ne 's/^\(.*\):.*/\1/p'
 }
 
+# Get the first (lowest unit #) serial device if any, if MDSERIAL is set.
+# NOTE: Only single digit serial devices (<dev>0 -> <dev>9) are looked for.
+get_serialdev() {
+	local _devs _d _bd _td
+
+	[[ -n $MDSERIAL ]] || exit
+	set -- $MDSERIAL
+	_d=$1
+	_bd=$2
+	_td=$3
+	_devs=$(sed -ne "/^${_d}\([0-9]\) .*/s//\1/p" /var/run/dmesg.boot)
+	_devs=$(bsort $_devs)
+	set -- $_devs
+	echo "${_bd}${1} ${_td}${1}"
+}
+
 # Ask for a password, saving the input in $resp.
 #    Display $1 as the prompt.
 #    *Don't* allow the '!' options that ask does.
@@ -397,9 +413,10 @@ __EOT
 makedev() {
 	local _dev=$1 _node=/dev/r${1}c
 
-	# Don't need to make network interface devices nodes. If the device
-	# nodes exist, don't need to create them.
-	if isin $_dev $IFDEVS || [[ -c $_node ]] ; then
+	# Don't need to make network interface device nodes.  If the device is
+	# just a number then ignore it. This is used when selecting a serial
+	# console speed.  If the device node exists, don't need to create it.
+	if isin $_dev $IFDEVS || [[ -c $_node || -z ${_dev##+([0-9])} ]] ; then
 		return 0
 	fi
 
@@ -1638,19 +1655,34 @@ populateusrlocal() {
 }
 
 questions() {
-	ask_yn "Do you wish sshd(8) to be started by default?" yes
+	local _bd _td
+
+	ask_yn "Start sshd(8) by default?" yes
 	if [[ $resp == n ]]; then
 		echo "sshd_flags=NO		# disabled during install" \
 		    > /mnt/etc/rc.conf.local
 	fi
 
-	[[ -n $MDXAPERTURE ]] || return
-
-	ask_yn "Do you expect to run the X Window System?" yes
-	if [[ $resp == y ]]; then
-		sed -e "/^#\(machdep\.allowaperture=${MDXAPERTURE}\)/s//\1	/" \
-		    /mnt/etc/sysctl.conf > /tmp/sysctl.conf
+	if [[ -n $MDXAPERTURE ]]; then
+		ask_yn "Do you expect to run the X Window System?" yes
+		if [[ $resp == y ]]; then
+			sed -e "/^#\(machdep\.allowaperture=${MDXAPERTURE}\)/s//\1	/" \
+			    /mnt/etc/sysctl.conf > /tmp/sysctl.conf
+		fi
 	fi
+
+	[[ -z $SERIALDEV ]] && return
+	set -- $SERIALDEV
+	_bd=$1
+	_td=$2
+	ask_yn "Change the default console to $_bd?"
+	[[ $resp == n ]] && return
+	echo "set tty $_bd" >>/mnt/etc/boot.conf
+	ask_which "speed" "should $_bd use" "9600 19200 38400 57600 115200" 9600
+	[[ $resp == done ]] && return
+	sed	-e "/^${_td}/s/std.9600/std.${resp}/" \
+		-e "/^${_td}/s/unknown/vt220	/" \
+		-e "/${_td}/s/off/on secure/" /mnt/etc/ttys >/tmp/ttys
 }
 
 finish_up() {
@@ -1727,10 +1759,11 @@ done
 # Extract and save one boot's worth of dmesg
 dmesg | sed -ne '/^OpenBSD /h;/^OpenBSD /!H;${g;p;}' > /var/run/dmesg.boot
 
-# Scan /var/run/dmesg.boot for disks and cds
-DKDEVS=`get_dkdevs`
-CDDEVS=`get_cddevs`
-IFDEVS=`get_ifdevs`
+# Scan /var/run/dmesg.boot for interesting devices.
+DKDEVS=$(get_dkdevs)
+CDDEVS=$(get_cddevs)
+IFDEVS=$(get_ifdevs)
+SERIALDEV=$(get_serialdev)
 
 # Devices created with makedev().
 DEVSMADE=
-- 
cgit v1.2.3