From e3fe6041f797796a20d93be1983a0bd0c4370a42 Mon Sep 17 00:00:00 2001 From: Jason McIntyre Date: Sat, 26 Jun 2004 12:41:34 +0000 Subject: various fixes; --- share/man/man4/san.4 | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/share/man/man4/san.4 b/share/man/man4/san.4 index a5bf7516115..9f1de4c8072 100644 --- a/share/man/man4/san.4 +++ b/share/man/man4/san.4 @@ -1,3 +1,4 @@ +.\" $OpenBSD: san.4,v 1.3 2004/06/26 12:41:33 jmc Exp $ .\" .\" Copyright (c) 2001-2004 Sangoma Technologies (SAN) .\" All rights reserved. www.sangoma.com @@ -42,7 +43,8 @@ The .Nm device driver supports the Sangoma Technologies Inc AFT Series Network -cards. This includes the following models: +cards. +This includes the following models: .Pp .Bl -item -offset indent -compact .It @@ -72,7 +74,8 @@ driver places the card into default mode (T1, B8ZS, ESF, all channels). .Pp Use .Xr ifconfig 8 -to change the timeslot range for this card. The following format is supported: +to change the timeslot range for this card. +The following format is supported: .Bl -tag -width xxx -offset indent .It Cm # ifconfig san0 timeslot all Enable all channels for this card. @@ -82,10 +85,9 @@ Enable channels 1-10 for this card. Enable channels 1-10, 14-15 and 20 for this card. .El .Pp -If the timeslot option is not present, the +If the timeslot option is not present, the .Nm driver configures the card to use all the channels. -.Pp .Sh DIAGNOSTICS .Bl -diag .It "san%d: couldn't map memory" @@ -110,5 +112,5 @@ device driver first appeared in .Sh AUTHORS The .Nm -device driver and this manual page was written by +device driver and this manual page were written by Alex Feldman. -- cgit v1.2.3