From 1cd55184ca3f39ac0e5ea776e6340d94b36146f7 Mon Sep 17 00:00:00 2001
From: Jonathan Gray <jsg@cvs.openbsd.org>
Date: Wed, 8 Mar 2017 09:33:04 +0000
Subject: copy rpi3 u-boot to the installed disk

Even though this can't be the SD card at the moment, it is possible to
boot off USB if an OTP bit has been set.
---
 distrib/arm64/ramdisk/install.md | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'distrib/arm64')

diff --git a/distrib/arm64/ramdisk/install.md b/distrib/arm64/ramdisk/install.md
index 7df6a9527d8..24b40ac6517 100644
--- a/distrib/arm64/ramdisk/install.md
+++ b/distrib/arm64/ramdisk/install.md
@@ -1,4 +1,4 @@
-#	$OpenBSD: install.md,v 1.2 2017/02/18 02:01:53 jsg Exp $
+#	$OpenBSD: install.md,v 1.3 2017/03/08 09:33:03 jsg Exp $
 #
 #
 # Copyright (c) 1996 The NetBSD Foundation, Inc.
@@ -50,6 +50,7 @@ md_installboot() {
 	_mdec=/usr/mdec/$_plat
 
 	cp $_mdec/{bootcode.bin,start.elf,fixup.dat,*.dtb} /mnt/mnt/
+	cp $_mdec/u-boot.bin /mnt/mnt/
 	cat > /mnt/mnt/config.txt<<-__EOT
 		arm_control=0x200
 		enable_uart=1
-- 
cgit v1.2.3