From 4b5549eb7177dfc955b9247f9190ad9252c8039c Mon Sep 17 00:00:00 2001 From: Kenneth R Westerback Date: Fri, 25 May 2007 21:27:17 +0000 Subject: "interupt" -> "interrupt" in various comments. Mostly from Diego Casati. --- distrib/notes/armish/prep | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'distrib/notes/armish') diff --git a/distrib/notes/armish/prep b/distrib/notes/armish/prep index 1e60002d74f..8892b0710f4 100644 --- a/distrib/notes/armish/prep +++ b/distrib/notes/armish/prep @@ -1,4 +1,4 @@ -dnl $OpenBSD: prep,v 1.5 2007/03/08 05:21:29 david Exp $ +dnl $OpenBSD: prep,v 1.6 2007/05/25 21:27:15 krw Exp $ To be able to boot the OpenBSD/MACHINE installation program, you will need to acquire some limited knowledge of RedBoot, the low-level process that controls the microprocessor after hardware initialization. @@ -8,7 +8,7 @@ The enabled features between IOData HDL-G and Thecus N2100 vary so the same methods will not work on both machines. On the Thecus N2100, it is necessary to move jumper J3 to J4 to properly -route the serial port interupt to allow serial to work under OpenBSD. +route the serial port interrupt to allow serial to work under OpenBSD. Thecus cannot load a file from disk, but can load an image from flash or network. -- cgit v1.2.3