From 36533235f0281dbe3635ed3f5eeedc9c7f0ccc5d Mon Sep 17 00:00:00 2001 From: Brandon Mercer Date: Wed, 7 Aug 2013 19:24:55 +0000 Subject: Add a note about booting from the sdcard on beaglebone black. OK florian@ --- distrib/notes/beagle/prep | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'distrib/notes') diff --git a/distrib/notes/beagle/prep b/distrib/notes/beagle/prep index 896ed243af8..da01caa5c8b 100644 --- a/distrib/notes/beagle/prep +++ b/distrib/notes/beagle/prep @@ -1,4 +1,4 @@ -dnl $OpenBSD: prep,v 1.2 2013/07/16 18:15:10 florian Exp $ +dnl $OpenBSD: prep,v 1.3 2013/08/07 19:24:54 bmercer Exp $ Please be aware that OpenBSD support for this platform is far from complete. @@ -17,3 +17,8 @@ The command would likely be, under OpenBSD: When you have connected the BeagleBoard to you computer, a command such as "tip -115200 tty00" (assuming tty00 is your serial port device) should connect you to the board's console. + +Note: By default the BeagleBone Black will boot from the internal emmc. +In order to make it boot from the micro sdcard, you will need to hold down +the small button located by the sdcard slot while powering on the board. +Once you have done this the board will boot from the sdcard as the default. -- cgit v1.2.3