From 9739056969cd91e9a035a6dc65328f66d6ddf719 Mon Sep 17 00:00:00 2001 From: Miod Vallat Date: Fri, 17 May 2013 23:17:22 +0000 Subject: AngelFire'r'us --- distrib/notes/mvme88k/hardware | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'distrib/notes') diff --git a/distrib/notes/mvme88k/hardware b/distrib/notes/mvme88k/hardware index eb9085000d4..c5de7807b76 100644 --- a/distrib/notes/mvme88k/hardware +++ b/distrib/notes/mvme88k/hardware @@ -1,8 +1,9 @@ -dnl $OpenBSD: hardware,v 1.16 2013/02/25 20:28:01 miod Exp $ +dnl $OpenBSD: hardware,v 1.17 2013/05/17 23:17:21 miod Exp $ OpenBSD/MACHINE OSREV runs on the systems built around the following MVME boards: - - MVME187 (Single board computer with 88100 processor) + - MVME181 (Barebone system with 88100 processor) + - MVME187/M8120 (Single board computer with 88100 processor) - MVME188 (HYPERmodule-based systems with up to 4 88100 processors) - MVME197LE (Single board computer with 88110 processor) - MVME197SP/DP (Single board computer with up to two 88110 processors) @@ -15,10 +16,10 @@ OpenBSD/MACHINE OSREV supports MVME188 and MVME197DP SMP (Symmetrical MultiProcessor) systems. To support SMP operation, a separate SMP kernel (bsd.mp) is included with the installation file sets. -12MB of RAM should be sufficient to boot and a minimal system can probably -be squeezed onto a 250MB disk by installing only the `base' and `etc' sets. -However, a minimum of 16MB is necessary for the system not to be swap-bound, -with 32MB or more being recommended for serious usage of the system. +While OpenBSD will boot in 8MB, 16MB of RAM are recommended as a minimum for +the system not to be swap-bound, wint 32MB or more being recommended for +serious usage of the system. A minimal system can probably be squeezed +onto a 250MB disk by installing only the `base' and `etc' sets. Note that until you have at least 32MB of RAM, getting more RAM is more important than getting a faster CPU board. @@ -39,7 +40,10 @@ Supported HYPERmodules: (for MVME188 systems) Supported devices: -MVME187 and MVME197 on-board devices: +MVME181 on-board devices: + serial ports, ttya-ttyb (dart) + +MVME187, M8120 and MVME197 on-board devices: Cirrus Logic CD2401 serial ports, tty00-tty03/tty07(M8120) (cl) Intel 82596CA Ethernet (ie) NCR53c710 SCSI Controller (osiop) -- cgit v1.2.3