From ad9f7bdc0e96619a4603d4a3c2bccc977e58eef3 Mon Sep 17 00:00:00 2001 From: David Krause Date: Sun, 30 Jul 2006 18:02:02 +0000 Subject: spacing --- etc/ppp/ppp.conf.sample | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'etc/ppp/ppp.conf.sample') diff --git a/etc/ppp/ppp.conf.sample b/etc/ppp/ppp.conf.sample index 26ab03cb9b3..9e4acfebd76 100644 --- a/etc/ppp/ppp.conf.sample +++ b/etc/ppp/ppp.conf.sample @@ -4,7 +4,7 @@ # # Originally written by Toshiharu OHNO # -# $OpenBSD: ppp.conf.sample,v 1.23 2006/07/19 06:10:17 fkr Exp $ +# $OpenBSD: ppp.conf.sample,v 1.24 2006/07/30 18:02:01 david Exp $ # ################################################################# @@ -101,16 +101,16 @@ ondemand: add default HISADDR enable dns -# To connect via a GPRS or UMTS device (e.g. a mobile phone or a PC Card), +# To connect via a GPRS or UMTS device (e.g. a mobile phone or a PC Card), # it's often necessary to set the access-point name (in this case 'internet') # which requires quotes in the dial string. This section shows the escaping # required. Devices that have not already authenticated the SIM card (like a -# PC Card) need to issue the "AT+CPIN=xxxx" (xxxx being the PIN for the SIM +# PC Card) need to issue the "AT+CPIN=xxxx" (xxxx being the PIN for the SIM # card) first. -# For certain devices it is necessary to adjust the baud rate (speed setting) +# For certain devices it is necessary to adjust the baud rate (speed setting) # and/or change the dial string to "*99***1#". # UMTS devices often allow control of the connect mode (UMTS only, GPRS only -# or default to which is available); this can be controlled with the number +# or default to which is available); this can be controlled with the number # passed to the AT+CGDCONT command and is device dependant. # Some ISPs do special things in their IPCP session in order to negotiate # the IP addresses; in this case it may be necessary to play with the ifaddr -- cgit v1.2.3