From 231968729612e921c448362cc0b443b2df13dced Mon Sep 17 00:00:00 2001 From: Jason McIntyre Date: Thu, 30 Jul 2009 06:30:46 +0000 Subject: tweak previous; --- share/man/man4/aibs.4 | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'share/man/man4/aibs.4') diff --git a/share/man/man4/aibs.4 b/share/man/man4/aibs.4 index 932c3b9f496..288648fce4a 100644 --- a/share/man/man4/aibs.4 +++ b/share/man/man4/aibs.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: aibs.4,v 1.3 2009/07/30 02:31:20 cnst Exp $ +.\" $OpenBSD: aibs.4,v 1.4 2009/07/30 06:30:45 jmc Exp $ .\" .\" Copyright (c) 2009 Constantine A. Murenin .\" @@ -102,10 +102,10 @@ hw.sensors.aibs0.volt7=0.93 VDC (DDR2 TERM Voltage), OK hw.sensors.aibs0.volt8=1.23 VDC (NB CORE Voltage), OK hw.sensors.aibs0.volt9=1.87 VDC (MEMORY Voltage), OK .Ed -.Sh NOTES +.Pp Generally, sensors provided by the .Nm -driver may also be supported by a variation of other drivers, +driver may also be supported by a variety of other drivers, such as .Xr lm 4 or @@ -135,7 +135,7 @@ In the required resistor factors are provided by the motherboard manufacturer through ACPI; in the native drivers, the resistor factors -are encoded into the driver based on the chip manufacturer recommendations. +are encoded into the driver based on the chip manufacturer's recommendations. In essence, sensor values from .Nm are very likely to be identical to the readings from the @@ -149,7 +149,7 @@ Sensor status is supported by .Nm . The status is reported based on the acceptable range of values for each individual sensor as suggested by the motherboard manufacturer. -For example, the threshold for CPU temperature sensor is likely +For example, the threshold for the CPU temperature sensor is likely to be significantly higher than that for the chassis temperature sensor. .It Support for newer chips in -- cgit v1.2.3