From f22881300f594b2cafc3b5c7bd15d798b4da76da Mon Sep 17 00:00:00 2001 From: Jason Downs Date: Fri, 28 Feb 1997 10:02:27 +0000 Subject: plip.4 -> plip.4tbl --- share/man/man4/man4.pc532/Makefile | 4 +- share/man/man4/man4.pc532/plip.4 | 97 ------------------------------------- share/man/man4/man4.pc532/plip.4tbl | 97 +++++++++++++++++++++++++++++++++++++ 3 files changed, 98 insertions(+), 100 deletions(-) delete mode 100644 share/man/man4/man4.pc532/plip.4 create mode 100644 share/man/man4/man4.pc532/plip.4tbl (limited to 'share/man/man4/man4.pc532') diff --git a/share/man/man4/man4.pc532/Makefile b/share/man/man4/man4.pc532/Makefile index 8ac4b2a7f10..c9644a0e6cc 100644 --- a/share/man/man4/man4.pc532/Makefile +++ b/share/man/man4/man4.pc532/Makefile @@ -1,10 +1,8 @@ +# $OpenBSD: Makefile,v 1.3 1997/02/28 10:02:18 downsj Exp $ # $NetBSD: Makefile,v 1.3 1996/01/25 07:19:54 phil Exp $ # Makefile for man4/man4.pc532 MAN= lpt.4 mem.4 plip.4 MANSUBDIR=/pc532 -plip.cat4: - tbl ${.IMPSRC} | nroff -mandoc > ${.TARGET} - .include diff --git a/share/man/man4/man4.pc532/plip.4 b/share/man/man4/man4.pc532/plip.4 deleted file mode 100644 index 47e60992dc7..00000000000 --- a/share/man/man4/man4.pc532/plip.4 +++ /dev/null @@ -1,97 +0,0 @@ -.\" $NetBSD: plip.4,v 1.3 1995/11/28 08:03:31 jtc Exp $ -.\" -.\" Copyright (c) 1994 Matthias Pfaller. -.\" All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. All advertising materials mentioning features or use of this software -.\" must display the following acknowledgement: -.\" This product includes software developed by Matthias Pfaller. -.\" 4. The name of the author may not be used to endorse or promote products -.\" derived from this software without specific prior written permission -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -.\" -.\" -.Dd December 1, 1994 -.Dt PLIP 4 pc532 -.Os -.Sh NAME -.Nm plip -.Nd "Option for the lpt driver to allow IP over centronics ports" -.Sh SYNOPSIS -.Cd "options PLIP" -.Cd "options COMPAT_PLIP10" -.Cd "options COMPAT_PLIP11" -.Sh DESCRIPTION -The -.Nm -interface provides a way to transport IP over centronics ports. -Protocols to communicate with Linux 1.0 and Linux 1.1 hosts are provided. -By default the 1.1 protocol is used. To choose the 1.0 protocol use -the link0 flag with -.Xr ifconfig 8 -or in your /etc/hostname.plip? file. In order to use the 1.0 protocol -the kernel has to be compiled with COMPAT_PLIP10. -.br -The COMPAT_PLIP11 option selects a default MTU of 1486 bytes. This is -necessary to work around a bug that is present in the plip code for -Linux 1.1.x and Linux 1.2.x. -.Sh NOTES -To connect two computers a "Laplink parallel cabel" is used: -.sp -.TS -allbox tab(|); -c|c|c|c -l|n|n|l. -Signalname|Con A|Con B|Description -Data 0|2|15|Data out 0 -Data 1|3|13|Data out 1 -Data 2|4|12|Data out 2 -Data 3|5|10|Data out 3/Wake out -Data 4|6|11|Data clock out -/Ack|10|5|Data in 3/Wake in -Busy|11|6|Data clock in -No Paper|12|4|Data in 2 -Select|13|3|Data in 1 -/Error|15|2|Data in 0 -Gnd|18-25|18-25|Ground -.TE -.sp -In both protocol versions ethernet frames are used. The 1.0 protocol assings -an ethernet address of the form FD:FD:ww:xx:yy:zz to the interface. The 1.1 -protocol uses FC instead of FD. ww, xx, yy and zz are taken from the internet -address ww.xx.yy.zz of the interface. Ethernet support has -to be configured into the kernel in order to use the -.Nm -interface. -.Sh SEE ALSO -.Xr lpt 4 -.Xr ifconfig 8 -.Sh DIAGNOSTICS -.Bl -diag -.It "plip?: tx hard error" -Packet transmission failed even after PLIPMXRETRY (20) retries. -.It "plip?: rx hard error" -PLIPMXERRS (20) packets caused receive errors in sequence. -.It "plip?: checksum error" -A packet with a bad checksum was received. -.It "plip?: packet > MTU" -A bogus packet longer then the MTU was received. -.El diff --git a/share/man/man4/man4.pc532/plip.4tbl b/share/man/man4/man4.pc532/plip.4tbl new file mode 100644 index 00000000000..47e60992dc7 --- /dev/null +++ b/share/man/man4/man4.pc532/plip.4tbl @@ -0,0 +1,97 @@ +.\" $NetBSD: plip.4,v 1.3 1995/11/28 08:03:31 jtc Exp $ +.\" +.\" Copyright (c) 1994 Matthias Pfaller. +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. All advertising materials mentioning features or use of this software +.\" must display the following acknowledgement: +.\" This product includes software developed by Matthias Pfaller. +.\" 4. The name of the author may not be used to endorse or promote products +.\" derived from this software without specific prior written permission +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR +.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.\" +.\" +.Dd December 1, 1994 +.Dt PLIP 4 pc532 +.Os +.Sh NAME +.Nm plip +.Nd "Option for the lpt driver to allow IP over centronics ports" +.Sh SYNOPSIS +.Cd "options PLIP" +.Cd "options COMPAT_PLIP10" +.Cd "options COMPAT_PLIP11" +.Sh DESCRIPTION +The +.Nm +interface provides a way to transport IP over centronics ports. +Protocols to communicate with Linux 1.0 and Linux 1.1 hosts are provided. +By default the 1.1 protocol is used. To choose the 1.0 protocol use +the link0 flag with +.Xr ifconfig 8 +or in your /etc/hostname.plip? file. In order to use the 1.0 protocol +the kernel has to be compiled with COMPAT_PLIP10. +.br +The COMPAT_PLIP11 option selects a default MTU of 1486 bytes. This is +necessary to work around a bug that is present in the plip code for +Linux 1.1.x and Linux 1.2.x. +.Sh NOTES +To connect two computers a "Laplink parallel cabel" is used: +.sp +.TS +allbox tab(|); +c|c|c|c +l|n|n|l. +Signalname|Con A|Con B|Description +Data 0|2|15|Data out 0 +Data 1|3|13|Data out 1 +Data 2|4|12|Data out 2 +Data 3|5|10|Data out 3/Wake out +Data 4|6|11|Data clock out +/Ack|10|5|Data in 3/Wake in +Busy|11|6|Data clock in +No Paper|12|4|Data in 2 +Select|13|3|Data in 1 +/Error|15|2|Data in 0 +Gnd|18-25|18-25|Ground +.TE +.sp +In both protocol versions ethernet frames are used. The 1.0 protocol assings +an ethernet address of the form FD:FD:ww:xx:yy:zz to the interface. The 1.1 +protocol uses FC instead of FD. ww, xx, yy and zz are taken from the internet +address ww.xx.yy.zz of the interface. Ethernet support has +to be configured into the kernel in order to use the +.Nm +interface. +.Sh SEE ALSO +.Xr lpt 4 +.Xr ifconfig 8 +.Sh DIAGNOSTICS +.Bl -diag +.It "plip?: tx hard error" +Packet transmission failed even after PLIPMXRETRY (20) retries. +.It "plip?: rx hard error" +PLIPMXERRS (20) packets caused receive errors in sequence. +.It "plip?: checksum error" +A packet with a bad checksum was received. +.It "plip?: packet > MTU" +A bogus packet longer then the MTU was received. +.El -- cgit v1.2.3