From c5e69da6b80ed88cada71c51a44b81bf2edb680c Mon Sep 17 00:00:00 2001 From: Jason McIntyre Date: Mon, 7 Apr 2003 16:03:33 +0000 Subject: typos; --- share/man/man4/ste.4 | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'share/man/man4/ste.4') diff --git a/share/man/man4/ste.4 b/share/man/man4/ste.4 index 993c6b21be3..20ee3a1d62d 100644 --- a/share/man/man4/ste.4 +++ b/share/man/man4/ste.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: ste.4,v 1.11 2002/09/26 07:55:40 miod Exp $ +.\" $OpenBSD: ste.4,v 1.12 2003/04/07 16:03:32 jmc Exp $ .\" .\" Copyright (c) 1997, 1998, 1999 .\" Bill Paul . All rights reserved. @@ -94,7 +94,7 @@ driver supports the following media options: .Pp .Bl -tag -width xxxxxxxxxxxxxxxxxxxx .It full-duplex -Force full duplex operation +Force full duplex operation. .It half-duplex Force half duplex operation. .El @@ -128,13 +128,13 @@ correctly. The driver tries to detect this condition and bring the adapter back to the D0 (full power) state, but this may not be enough to return the driver to a fully operational condition. -If you see this message at boot time and the driver fails to attach -the device as a network interface, you will have to perform second -warm boot to have the device properly configured. +If this message appears at boot time and the driver fails to attach +the device as a network interface, a second warm boot will have to be +performed to have the device properly configured. .Pp Note that this condition only occurs when warm booting from another operating system. -If you power down your system prior to booting +If the system is powered down prior to booting .Ox , the card should be configured correctly. .El -- cgit v1.2.3