From ee067f2a7644d78d14c244fabbfe86f41e843d7e Mon Sep 17 00:00:00 2001 From: Martin Reindl Date: Wed, 6 Dec 2006 20:30:27 +0000 Subject: update for new driver; remove diagnostic section, add bugs, bump date --- share/man/man4/sf.4 | 42 +++++++++++------------------------------- 1 file changed, 11 insertions(+), 31 deletions(-) (limited to 'share/man/man4') diff --git a/share/man/man4/sf.4 b/share/man/man4/sf.4 index 8cf9b97effc..7d597eea415 100644 --- a/share/man/man4/sf.4 +++ b/share/man/man4/sf.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: sf.4,v 1.18 2006/08/30 22:56:05 jmc Exp $ +.\" $OpenBSD: sf.4,v 1.19 2006/12/06 20:30:26 martin Exp $ .\" .\" Copyright (c) 1997, 1998, 1999 .\" Bill Paul . All rights reserved. @@ -32,7 +32,7 @@ .\" .\" $FreeBSD: src/share/man/man4/man4.i386/sf.4,v 1.4 1999/09/26 18:35:30 wpaul Exp $ .\" -.Dd July 22, 1999 +.Dd December 6, 2006 .Dt SF 4 .Os .Sh NAME @@ -118,34 +118,6 @@ Force half duplex operation. .Pp For more information on configuring this device, see .Xr ifconfig 8 . -.Sh DIAGNOSTICS -.Bl -diag -.It "sf%d: couldn't map memory" -A fatal initialization error has occurred. -This may happen if the PCI BIOS did not configure the device, which can occur -when the BIOS has been configured for a "Plug and Play" operating system. -The "Plug and Play OS" setting in the BIOS should be set to "no" or -"off" in order for PCI devices to work properly with -.Ox . -.It "sf%d: couldn't map ports" -A fatal initialization error has occurred. -This may happen if the PCI BIOS did not configure the device, which can occur -when the BIOS has been configured for a "Plug and Play" operating system. -The "Plug and Play OS" setting in the BIOS should be set to "no" or -"off" in order for PCI devices to work properly with -.Ox . -.It "sf%d: couldn't map interrupt" -A fatal initialization error has occurred. -.It "sf%d: no memory for softc struct!" -The driver failed to allocate memory for per-device instance information -during initialization. -.It "sf%d: failed to enable I/O ports/memory mapping!" -The driver failed to initialize PCI I/O port or shared memory access. -This might happen if the card is not in a bus-master slot. -.It "sf%d: watchdog timeout" -The device has stopped responding to the network, or there is a problem with -the network connection (cable). -.El .Sh SEE ALSO .Xr arp 4 , .Xr ifmedia 4 , @@ -168,4 +140,12 @@ device driver first appeared in The .Nm driver was written by -.An Bill Paul Aq wpaul@ctr.columbia.edu . +.An Jason R. Thorpe . +.Sh BUGS +The +.Nm +driver does not support the IPv4/TCP/UDP checksum function of the AIC-6915. +.Pp +The +.Nm +driver does not support the VLAN function of the AIC-6915. -- cgit v1.2.3