From f85e41be1ee45cb69c9667df538044de6db8f105 Mon Sep 17 00:00:00 2001 From: Michael Shalayeff Date: Fri, 5 Apr 2002 20:29:28 +0000 Subject: add 802.11 media configuration --- share/man/man4/ifmedia.4 | 133 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 97 insertions(+), 36 deletions(-) (limited to 'share') diff --git a/share/man/man4/ifmedia.4 b/share/man/man4/ifmedia.4 index 307e58f368f..8aa20b55b1a 100644 --- a/share/man/man4/ifmedia.4 +++ b/share/man/man4/ifmedia.4 @@ -1,5 +1,5 @@ -.\" $OpenBSD: ifmedia.4,v 1.8 2001/11/13 13:54:25 mpech Exp $ -.\" $NetBSD: ifmedia.4,v 1.1 1998/08/09 00:37:17 thorpej Exp $ +.\" $OpenBSD: ifmedia.4,v 1.9 2002/04/05 20:29:27 mickey Exp $ +.\" $NetBSD: ifmedia.4,v 1.14 2001/06/30 17:57:56 bjh21 Exp $ .\" .\" Copyright (c) 1998 The NetBSD Foundation, Inc. .\" All rights reserved. @@ -36,7 +36,7 @@ .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.Dd August 8, 1998 +.Dd July 19, 2000 .Dt IFMEDIA 4 .Os .Sh NAME @@ -55,16 +55,17 @@ The media is typically set using the .Xr ifconfig 8 command. .Pp -There are currently three link types supported by -.Nm ifmedia : -.Pp -.Bl -tag -offset indent -width IFM_ETHER -compact +There are currently four link types supported by +.Nm Ns : +.Bl -tag -offset indent -width IFM_IEEE80211 -compact .It Dv IFM_ETHER Ethernet .It Dv IFM_TOKEN Token Ring .It Dv IFM_FDDI FDDI +.It Dv IFM_IEEE80211 +IEEE802.11 Wireless LAN .El .Pp The following sections describe the possible media settings for each @@ -78,7 +79,7 @@ option. Additional names are acceptable aliases for the media type or option. .Sh COMMON MEDIA TYPES AND OPTIONS The following media types are shared by all link types: -.Bl -tag -offset indent -width IFM_MANUAL +.Bl -tag -offset indent -width IFM_MANUAL -compact .It Dv IFM_AUTO Autoselect the best media. [autoselect, auto] @@ -95,17 +96,19 @@ The following media options are shared by all link types: .It Dv IFM_FDX Place the device into full-duplex mode. This option only has meaning if the device is normally not full-duplex. -[full-duplex, fdx] .It Dv IFM_HDX Place the device into half-duplex mode. This option only has meaning if the device is normally not half-duplex. [half-duplex, hdx] .It Dv IFM_FLAG0 -Driver-defined flag. [flag0] +Driver-defined flag. +[flag0] .It Dv IFM_FLAG1 -Driver-defined flag. [flag1] +Driver-defined flag. +[flag1] .It Dv IFM_FLAG2 -Driver-defined flag. [flag2] +Driver-defined flag. +[flag2] .It Dv IFM_LOOP Place the device into hardware loopback mode. [loopback, hw-loopback, loop] @@ -114,42 +117,55 @@ Place the device into hardware loopback mode. The following media types are defined for Ethernet: .Bl -tag -offset indent -width IFM_1000_FX .It Dv IFM_10_T -10baseT, 10Mb/s over unshielded twisted pair, RJ45 connector. +10BASE-T, 10Mb/s over unshielded twisted pair, RJ45 connector. [10baseT, UTP, 10UTP] .It Dv IFM_10_2 -10base2, 10Mb/s over coaxial cable, BNC connector, also called Thinnet. +10BASE2, 10Mb/s over coaxial cable, BNC connector, also called Thinnet. [10base2, BNC, 10BNC] .It Dv IFM_10_5 -10base5, 10Mb/s over 15-wire cables, DB15 connector, also called AUI. +10BASE5, 10Mb/s over 15-wire cables, DB15 connector, also called AUI. [10base5, AUI, 10AUI] +.It Dv IFM_10_STP +10BASE-STP, 10Mb/s over shielded twisted pair, DB9 connector. +[10baseSTP, STP, 10STP] +.It Dv IFM_10_FL +10BASE-FL, 10Mb/s over fiber optic cables. +[10baseFL, FL, 10FL] .It Dv IFM_100_TX -100baseTX, 100Mb/s over unshielded twisted pair, RJ45 connector. +100BASE-TX, 100Mb/s over unshielded twisted pair, RJ45 connector. [100baseTX, 100TX] .It Dv IFM_100_FX -100baseFX, 100Mb/s over fiber optic cables. +100BASE-FX, 100Mb/s over fiber optic cables. [100baseFX, 100FX] .It Dv IFM_100_T4 -100baseT4, 100Mb/s over 4-wire (category 3) unshielded twisted pair, RJ45 +100BASE-T4, 100Mb/s over 4-wire (category 3) unshielded twisted pair, RJ45 connector. [100baseT4, 100T4] -.It Dv IFM_100_VG -100baseVG AnyLAN. -[100baseVG, 100VG] .It Dv IFM_100_T2 -100baseT2. +100BASE-T2. [100baseT2, 100T2] -.It Dv IFM_1000_FX -1000baseFX, 1Gb/s over fiber optic cables. -[1000baseFX, 1000FX] -.It Dv IFM_10_STP -10baseSTP, 10Mb/s over shielded twisted pair, DB9 connector. -[10baseSTP, STP, 10STP] -.It Dv IFM_10_FL -10baseFL, 10Mb/s over fiber optic cables. -[10baseFL, FL, 10FL] +.It Dv IFM_100_VG +100VG-AnyLAN. +[100baseVG, 100VG] +.It Dv IFM_1000_SX +1000BASE-SX, 1Gb/s over multi-mode fiber optic cables. +[1000baseSX, 1000SX] +.It Dv IFM_1000_LX +1000BASE-LX, 1Gb/s over single-mode fiber optic cables. +[1000baseLX, 1000LX] +.It Dv IFM_1000_CX +1000BASE-CX, 1Gb/s over shielded twisted pair. +[1000baseCX, 1000CX] +.It Dv IFM_1000_T +1000BASE-T, 1Gb/s over category 5 unshielded twisted pair, RJ45 connector. +[1000baseT, 1000T] .El .Pp -There are no link type-specific options defined for Ethernet. +The following media option is defined for Ethernet: +.Bl -tag -offset indent -width IFM_ETH_MASTER +.It Dv IFM_ETH_MASTER +Configure a 1000BASE-T PHY as a MASTER PHY. +.El .Sh MEDIA TYPES AND OPTIONS FOR TOKEN RING The following media types are defined for Token Ring: .Bl -tag -offset indent -width IFM_TOK_UTP16 @@ -181,7 +197,7 @@ All routes vs. single route broadcast. .El .Sh MEDIA TYPES AND OPTIONS FOR FDDI The following media types are defined for FDDI: -.Bl -tag -offset indent -width IFM_FDDI_SMF +.Bl -tag -offset indent -width IFM_FDDI_SMF -compact .It Dv IFM_FDDI_SMF Single-mode fiber. [Single-mode, SMF] @@ -199,6 +215,42 @@ The following media options are defined for FDDI: Dual-attached station vs. Single-attached station. [dual-attach, das] .El +.Sh MEDIA TYPES AND OPTIONS FOR IEEE802.11 WIRELESS LAN +The following media types are defined for IEEE802.11 Wireless LAN: +.Bl -tag -offset indent -width IFM_IEEE80211_DS11 -compact +.It Dv IFM_IEEE80211_FH1 +Frequency Hopping 1Mbps. +[FH1] +.It Dv IFM_IEEE80211_FH2 +Frequency Hopping 2Mbps. +[FH2] +.It Dv IFM_IEEE80211_DS1 +Direct Sequence 1Mbps. +[DS1] +.It Dv IFM_IEEE80211_DS2 +Direct Sequence 2Mbps. +[DS2] +.It Dv IFM_IEEE80211_DS5 +Direct Sequence 5.5Mbps. +[DS5] +.It Dv IFM_IEEE80211_DS11 +Direct Sequence 11Mbps. +[DS11] +.El +.Pp +The following media options are defined for IEEE802.11 Wireless LAN: +.Bl -tag -offset indent -width IFM_IEEE80211_ADHOC -compact +.It Dv IFM_IEEE80211_ADHOC +adhoc mode vs. infrastructure mode [adhoc] +.It Dv IFM_IEEE80211_HOSTAP +Host Access Point mode, implemented for +.Tn Prism 2 +and +.Tn Prism 2.5 +chipset, only in +.Xr wi 4 +driver. +.El .Sh SEE ALSO .Xr netintro 4 , .Xr ifconfig 8 @@ -210,6 +262,15 @@ interface first appeared in The implementation that appeared in .Nx 1.3 was written by Jonathan Stone and Jason R. Thorpe to be compatible with -the BSDI API. -It has since gone through several revisions which have extended the API -while maintaining backwards compatibility with the original API. +the BSDI API. It has since gone through several revisions which have +extended the API while maintaining backwards compatibility with the +original API. +.Pp +Support for the +.Sy IEEE802.11 Wireless LAN +link type was added in +.Nx 1.5 . +.Pp +.Sy Host AP +mode was added in +.Ox 3.1 . -- cgit v1.2.3