From 954b1a417ec63f20d2dde0645d24641005375a40 Mon Sep 17 00:00:00 2001 From: Miod Vallat Date: Tue, 18 Mar 2014 22:36:38 +0000 Subject: Retire hp300, mvme68k and mvme88k ports. These ports have no users, keeping this hardware alive is becoming increasingly difficult, and I should heed the message sent by the three disks which have died on me over the last few days. Noone sane will mourn these ports anyway. So long, and thanks for the fish. --- sys/arch/hp300/dev/mb89352reg.h | 231 ---------------------------------------- 1 file changed, 231 deletions(-) delete mode 100644 sys/arch/hp300/dev/mb89352reg.h (limited to 'sys/arch/hp300/dev/mb89352reg.h') diff --git a/sys/arch/hp300/dev/mb89352reg.h b/sys/arch/hp300/dev/mb89352reg.h deleted file mode 100644 index fc45a14682a..00000000000 --- a/sys/arch/hp300/dev/mb89352reg.h +++ /dev/null @@ -1,231 +0,0 @@ -/* $OpenBSD: mb89352reg.h,v 1.2 2008/10/17 18:30:20 okan Exp $ */ -/* $NetBSD: mb89352reg.h,v 1.3 2003/08/07 16:31:02 agc Exp $ */ -/* NecBSD: mb89352reg.h,v 1.3 1998/03/14 07:04:34 kmatsuda Exp */ - -/*- - * Copyright (c) 1990, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to The NetBSD Foundation - * by Charles M. Hannum, Masaru Oki and Kouichi Matsuda. - * - * This code is derived from software contributed to Berkeley by - * Van Jacobson of Lawrence Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)scsireg.h 8.1 (Berkeley) 6/10/93 - */ - -/*- - * Copyright (c) 1996,97,98,99 The NetBSD Foundation, Inc. - * All rights reserved. - * - * This code is derived from software contributed to The NetBSD Foundation - * by Charles M. Hannum, Masaru Oki and Kouichi Matsuda. - * - * This code is derived from software contributed to Berkeley by - * Van Jacobson of Lawrence Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)scsireg.h 8.1 (Berkeley) 6/10/93 - */ -/* - * [NetBSD for NEC PC-98 series] - * Copyright (c) 1996, 1997, 1998 - * NetBSD/pc98 porting staff. All rights reserved. - * Copyright (c) 1996, 1997, 1998 - * Kouichi Matsuda. All rights reserved. - */ - -/* - * FUJITSU MB89352A SCSI Protocol Controller Hardware Description. - */ - -/* Definitions, most of them has turned out to be unneccesary, but here they - * are anyway. - */ - -#define BDID 0x00 /* Bus Device ID (R/W) */ -#define SCTL 0x01 /* SPC Control register (R/W) */ -#define SCMD 0x02 /* Command Register (R/W) */ -#define TMOD 0x03 /* Transmit Mode Register (synch models) */ -#define INTS 0x04 /* Interrupt sense (R); Interrupt Reset (W) */ -#define PSNS 0x05 /* Phase Sense (R); SPC Diagnostic Control (W) */ -#define SSTS 0x06 /* SPC status (R/O) */ -#define SERR 0x07 /* SPC error status (R/O) */ -#define PCTL 0x08 /* Phase Control (R/W) */ -#define MBC 0x09 /* Modified Byte Counter (R/O) */ -#define DREG 0x0a /* Data Register (R/W) */ -#define TEMP 0x0b /* Temporary Register (R/W) */ -#define TCH 0x0c /* Transfer Counter High (R/W) */ -#define TCM 0x0d /* Transfer Counter Middle (R/W) */ -#define TCL 0x0e /* Transfer Counter Low (R/W) */ -#define EXBF 0x0f /* External Buffer (synch models) */ - -/* What all the bits do */ - -/* SCSI_BDID */ -/* SCSI selection/reselection ID (both target *and* initiator) */ -#define SELID7 0x80 -#define SELID6 0x40 -#define SELID5 0x20 -#define SELID4 0x10 -#define SELID3 0x08 -#define SELID2 0x04 -#define SELID1 0x02 -#define SELID0 0x01 - -/* SCSI_SCTL */ -#define SCTL_DISABLE 0x80 -#define SCTL_CTRLRST 0x40 -#define SCTL_DIAG 0x20 -#define SCTL_ABRT_ENAB 0x10 -#define SCTL_PARITY_ENAB 0x08 -#define SCTL_SEL_ENAB 0x04 -#define SCTL_RESEL_ENAB 0x02 -#define SCTL_INTR_ENAB 0x01 - -/* SCSI_SCMD */ -#define SCMD_RST 0x10 -#define SCMD_ICPT_XFR 0x08 -#define SCMD_PROG_XFR 0x04 -#define SCMD_PAD 0x01 /* if initiator */ -#define SCMD_PERR_STOP 0x01 /* if target */ - /* command codes */ -#define SCMD_BUS_REL 0x00 -#define SCMD_SELECT 0x20 -#define SCMD_RST_ATN 0x40 -#define SCMD_SET_ATN 0x60 -#define SCMD_XFR 0x80 -#define SCMD_XFR_PAUSE 0xa0 -#define SCMD_RST_ACK 0xc0 -#define SCMD_SET_ACK 0xe0 - -/* SCSI_TMOD */ -#define TMOD_SYNC 0x80 - -/* SCSI_INTS */ -#define INTS_SEL 0x80 -#define INTS_RESEL 0x40 -#define INTS_DISCON 0x20 -#define INTS_CMD_DONE 0x10 -#define INTS_SRV_REQ 0x08 -#define INTS_TIMEOUT 0x04 -#define INTS_HARD_ERR 0x02 -#define INTS_RST 0x01 - -/* SCSI_PSNS */ -#define PSNS_REQ 0x80 -#define PSNS_ACK 0x40 -#define PSNS_ATN 0x20 -#define PSNS_SEL 0x10 -#define PSNS_BSY 0x08 - -/* PSNS */ -#define REQI 0x80 -#define ACKI 0x40 -#define ATNI 0x20 -#define SELI 0x10 -#define BSYI 0x08 -#define MSGI 0x04 -#define CDI 0x02 -#define IOI 0x01 - -/* Important! The 3 most significant bits of this register, in initiator mode, - * represents the "expected" SCSI bus phase and can be used to trigger phase - * mismatch and phase change interrupts. But more important: If there is a - * phase mismatch the chip will not transfer any data! This is actually a nice - * feature as it gives us a bit more control over what is happening when we are - * bursting data (in) through the FIFOs and the phase suddenly changes from - * DATA IN to STATUS or MESSAGE IN. The transfer will stop and wait for the - * proper phase to be set in this register instead of dumping the bits into the - * FIFOs. - */ -#if 0 -#define REQO 0x80 -#define ACKO 0x40 -#define ATNO 0x20 -#define SELO 0x10 -#define BSYO 0x08 -#endif -/* PCTL */ -#define MSGO 0x04 -#define CDO 0x02 -#define IOO 0x01 - -/* Information transfer phases */ -#define PH_DATAOUT (0) -#define PH_DATAIN (IOI) -#define PH_CMD (CDI) -#define PH_STAT (CDI | IOI) -#define PH_MSGOUT (MSGI | CDI) -#define PH_MSGIN (MSGI | CDI | IOI) - -#define PH_MASK (MSGI | CDI | IOI) - -#define PH_INVALID 0xff - -/* SCSI_SSTS */ -#define SSTS_INITIATOR 0x80 -#define SSTS_TARGET 0x40 -#define SSTS_BUSY 0x20 -#define SSTS_XFR 0x10 -#define SSTS_ACTIVE (SSTS_INITIATOR|SSTS_XFR) -#define SSTS_RST 0x08 -#define SSTS_TCZERO 0x04 -#define SSTS_DREG_FULL 0x02 -#define SSTS_DREG_EMPTY 0x01 - -/* SCSI_SERR */ -#define SERR_SCSI_PAR 0x80 -#define SERR_SPC_PAR 0x40 -#define SERR_TC_PAR 0x08 -#define SERR_PHASE_ERR 0x04 -#define SERR_SHORT_XFR 0x02 -#define SERR_OFFSET 0x01 - -/* SCSI_PCTL */ -#define PCTL_BFINT_ENAB 0x80 -- cgit v1.2.3