From a02c4f2a2e9519430b5bd0bdc5d15c8812cb93b1 Mon Sep 17 00:00:00 2001
From: Dave Voutila <dv@cvs.openbsd.org>
Date: Sat, 4 Dec 2021 18:51:37 +0000
Subject: vmm(4): reload vmcs after possible sleep points

Guests running on Intel hosts that sleep on a lock might have their
process moved to another cpu core by the scheduler. If this happens,
the VMCS needs to be remotely cleared and locally loaded otherwise
vmx instructions will fail. vmd(8) will receive a failure code and
abort the guest.

This change stores the current (last) cpu the process was on before
attempting a function call that may sleep (e.g. uvm_fault(9)). Upon
function return, perform the VMCS dance if needed.

Tested with help from Mischa Pieters.

OK mlarkin@
---
 sys/arch/amd64/amd64/vmm.c | 43 +++++++++++++++++++++++++++++++++++++------
 1 file changed, 37 insertions(+), 6 deletions(-)

(limited to 'sys/arch')

diff --git a/sys/arch/amd64/amd64/vmm.c b/sys/arch/amd64/amd64/vmm.c
index 8e588f7dcbd..485f5125bda 100644
--- a/sys/arch/amd64/amd64/vmm.c
+++ b/sys/arch/amd64/amd64/vmm.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: vmm.c,v 1.296 2021/11/29 15:55:36 dv Exp $	*/
+/*	$OpenBSD: vmm.c,v 1.297 2021/12/04 18:51:36 dv Exp $	*/
 /*
  * Copyright (c) 2014 Mike Larkin <mlarkin@openbsd.org>
  *
@@ -3028,12 +3028,22 @@ vcpu_reset_regs_vmx(struct vcpu *vcpu, struct vcpu_reg_state *vrs)
 	    IA32_VMX_ACTIVATE_SECONDARY_CONTROLS, 1)) {
 		if (vcpu_vmx_check_cap(vcpu, IA32_VMX_PROCBASED2_CTLS,
 		    IA32_VMX_ENABLE_VPID, 1)) {
-			if (vmm_alloc_vpid(&vpid)) {
+
+			/* We may sleep during allocation, so reload VMCS. */
+			vcpu->vc_last_pcpu = curcpu();
+			ret = vmm_alloc_vpid(&vpid);
+			if (vcpu_reload_vmcs_vmx(vcpu)) {
+				printf("%s: failed to reload vmcs\n", __func__);
+				ret = EINVAL;
+				goto exit;
+			}
+			if (ret) {
 				DPRINTF("%s: could not allocate VPID\n",
 				    __func__);
 				ret = EINVAL;
 				goto exit;
 			}
+
 			if (vmwrite(VMCS_GUEST_VPID, vpid)) {
 				DPRINTF("%s: error setting guest VPID\n",
 				    __func__);
@@ -5549,7 +5559,7 @@ svm_handle_np_fault(struct vcpu *vcpu)
  *
  * Return Values:
  *  0: if successful
- *  EINVAL: if fault type could not be determined
+ *  EINVAL: if fault type could not be determined or VMCS reload fails
  *  EAGAIN: if a protection fault occurred, ie writing to a read-only page
  *  errno: if uvm_fault(9) fails to wire in the page
  */
@@ -5569,10 +5579,14 @@ vmx_fault_page(struct vcpu *vcpu, paddr_t gpa)
 		return (EAGAIN);
 	}
 
-	KERNEL_LOCK();
+	/* We may sleep during uvm_fault(9), so reload VMCS. */
+	vcpu->vc_last_pcpu = curcpu();
 	ret = uvm_fault(vcpu->vc_parent->vm_map, gpa, VM_FAULT_WIRE,
 	    PROT_READ | PROT_WRITE | PROT_EXEC);
-	KERNEL_UNLOCK();
+	if (vcpu_reload_vmcs_vmx(vcpu)) {
+		printf("%s: failed to reload vmcs\n", __func__);
+		return (EINVAL);
+	}
 
 	if (ret)
 		printf("%s: uvm_fault returns %d, GPA=0x%llx, rip=0x%llx\n",
@@ -5962,7 +5976,16 @@ vmx_load_pdptes(struct vcpu *vcpu)
 
 	ret = 0;
 
-	cr3_host_virt = (vaddr_t)km_alloc(PAGE_SIZE, &kv_any, &kp_none, &kd_waitok);
+	/* We may sleep during km_alloc(9), so reload VMCS. */
+	vcpu->vc_last_pcpu = curcpu();
+	cr3_host_virt = (vaddr_t)km_alloc(PAGE_SIZE, &kv_any, &kp_none,
+	    &kd_waitok);
+	if (vcpu_reload_vmcs_vmx(vcpu)) {
+		printf("%s: failed to reload vmcs\n", __func__);
+		ret = EINVAL;
+		goto exit;
+	}
+
 	if (!cr3_host_virt) {
 		printf("%s: can't allocate address for guest CR3 mapping\n",
 		    __func__);
@@ -5998,7 +6021,15 @@ vmx_load_pdptes(struct vcpu *vcpu)
 
 exit:
 	pmap_kremove(cr3_host_virt, PAGE_SIZE);
+
+	/* km_free(9) might sleep, so we need to reload VMCS. */
+	vcpu->vc_last_pcpu = curcpu();
 	km_free((void *)cr3_host_virt, PAGE_SIZE, &kv_any, &kp_none);
+	if (vcpu_reload_vmcs_vmx(vcpu)) {
+		printf("%s: failed to reload vmcs after km_free\n", __func__);
+		ret = EINVAL;
+	}
+
 	return (ret);
 }
 
-- 
cgit v1.2.3