From 4485f4c8d7ae0bdcebf43495ea0a590fb3dadb61 Mon Sep 17 00:00:00 2001 From: Alexander Yurchenko Date: Sat, 7 Jun 2003 20:00:33 +0000 Subject: Experimental support for Intel 31244 SATA, only parallel ATA mode yet; from NetBSD. --- sys/dev/pci/pciide_i31244_reg.h | 261 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 261 insertions(+) create mode 100644 sys/dev/pci/pciide_i31244_reg.h (limited to 'sys/dev/pci/pciide_i31244_reg.h') diff --git a/sys/dev/pci/pciide_i31244_reg.h b/sys/dev/pci/pciide_i31244_reg.h new file mode 100644 index 00000000000..003e78a7be7 --- /dev/null +++ b/sys/dev/pci/pciide_i31244_reg.h @@ -0,0 +1,261 @@ +/* $OpenBSD: pciide_i31244_reg.h,v 1.1 2003/06/07 20:00:32 grange Exp $ */ +/* $NetBSD: pciide_i31244_reg.h,v 1.1 2003/03/18 01:41:54 thorpej Exp $ */ + +/* + * Copyright (c) 2002 Wasabi Systems, Inc. + * All rights reserved. + * + * Written by Jason R. Thorpe for Wasabi Systems, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed for the NetBSD Project by + * Wasabi Systems, Inc. + * 4. The name of Wasabi Systems, Inc. may not be used to endorse + * or promote products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _DEV_PCI_PCIIDE_I31244_REG_H_ +#define _DEV_PCI_PCIIDE_I31244_REG_H_ + +/* + * Register definitions for the Intel i31244 Serial ATA Controller. + */ + +/* + * In DPA mode, the i31244 has a single 64-bit BAR. + */ +#define ARTISEA_PCI_DPA_BASE PCI_MAPREG_START + +/* + * Extended Control and Status Register 0 + */ +#define ARTISEA_PCI_SUECR0 0x98 +#define SUECR0_LED0_ONLY (1U << 28) /* activity on LED0 only */ +#define SUECR0_SFSS (1U << 16) /* Superset Features + Secondary Select */ + +/* + * DPA mode shared registers. + */ +#define ARTISEA_SUPDIPR 0x00 /* DPA interrupt pending register */ +#define SUPDIPR_PORTSHIFT(x) ((x) * 8) +#define SUPDIPR_PHY_CS (1U << 0) /* PHY change state */ +#define SUPDIPR_PHY_RDY (1U << 1) /* PHY ready */ +#define SUPDIPR_FIFO_ERR (1U << 2) /* FIFO error */ +#define SUPDIPR_ERR_RCVD (1U << 3) /* ERR received */ +#define SUPDIPR_U_FIS_R (1U << 4) /* unrecog. FIS reception */ +#define SUPDIPR_DATA_I (1U << 5) /* data integrity */ +#define SUPDIPR_CRC_ED (1U << 6) /* CRC error detected */ +#define SUPDIPR_IDE (1U << 7) /* IDE interrupt */ + +#define ARTISEA_SUPDIMR 0x04 /* DPA interrupt mask register */ + /* See SUPDIPR bits. */ + +/* + * DPA mode offset to per-port registers. + */ +#define ARTISEA_DPA_PORT_BASE(x) (((x) + 1) * 0x200) + +/* + * DPA mode per-port registers. + */ +#define ARTISEA_SUPDDR 0x00 /* DPA data port register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDER 0x04 /* DPA error register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDFR 0x06 /* DPA features register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDCSR 0x08 /* DPA sector count register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDSNR 0x0c /* DPA sector number register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDCLR 0x10 /* DPA cylinder low register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDCHR 0x14 /* DPA cylinder high register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDDHR 0x18 /* DPA device/head register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDSR 0x1c /* DPA status register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDCR 0x1d /* DPA command register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDASR 0x28 /* DPA alt. status register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDDCTLR 0x29 /* DPA device control register */ + /* ATA/ATAPI compatible */ + +#define ARTISEA_SUPDUDDTPR 0x64 /* DPA upper DMA desc. table pointer */ + +#define ARTISEA_SUPDUDDPR 0x6c /* DPA upper DMA data buffer pointer */ + +#define ARTISEA_SUPDDCMDR 0x70 /* DPA DMA command register */ + /* Almost compatible with PCI IDE, but not quite. */ +#define SUPDDCMDR_START (1U << 0) /* start DMA transfer (c) */ +#define SUPDDCMDR_WRITE (1U << 3) /* write *to memory* (c) */ +#define SUPDDCMDR_DP_DMA_ACT (1U << 8) /* first party DMA active */ +#define SUPDDCMDR_FP_DMA_DIR (1U << 9) /* 1 = host->device */ + +#define ARTISEA_SUPDDSR 0x72 /* DPA DMA status register */ + /* PCI IDE compatible */ + +#define ARTISEA_SUPDDDTPR 0x74 /* DPA DMA desc. table pointer */ + +#define ARTISEA_SUPERSET_DPA_OFF 0x100 /* offset to Superset regs: DPA mode */ + +#define ARTISEA_SUPDSSSR 0x000 /* DPA SATA SStatus register */ +#define SUPDSSSR_IPM_NP (0 << 8) /* device not present */ +#define SUPDSSSR_IPM_ACT (1U << 8) /* active state */ +#define SUPDSSSR_IPM_PARTIAL (2U << 8) /* partial power mgmt */ +#define SUPDSSSR_IPM_SLUMBER (6U << 8) /* slumber power mgmt */ +#define SUPDSSSR_SPD_NP (0 << 4) /* device not present */ +#define SUPDSSSR_SPD_G1 (1U << 4) /* Generation 1 speed */ +#define SUPDSSSR_DET_NP (0 << 0) /* device not present */ +#define SUPDSSSR_DET_PHY_CNE (1U << 0) /* PHY comm. not established */ +#define SUPDSSSR_DET_PHY_CE (3U << 0) /* PHY comm. established */ +#define SUPDSSSR_DET_PHY_LOOP (4U << 0) /* loopback mode */ + +#define ARTISEA_SUPDSSER 0x004 /* DPA SATA SError register */ +#define SUPDSSER_DIAG_F (1U << 25) /* invalid FIS type */ +#define SUPDSSER_DIAG_T (1U << 24) /* not implemented */ +#define SUPDSSER_DIAG_S (1U << 23) /* not implemented */ +#define SUPDSSER_DIAG_H (1U << 22) /* handshake error */ +#define SUPDSSER_DIAG_C (1U << 21) /* CRC error */ +#define SUPDSSER_DIAG_D (1U << 20) /* disparity error */ +#define SUPDSSER_DIAG_B (1U << 19) /* not implemented */ +#define SUPDSSER_DIAG_W (1U << 18) /* comm wake */ +#define SUPDSSER_DIAG_I (1U << 17) /* not implemented */ +#define SUPDSSER_DIAG_N (1U << 16) /* PHY RDY state change */ +#define SUPDSSER_ERR_E (1U << 11) /* internal error */ +#define SUPDSSER_ERR_P (1U << 10) /* protocol error */ +#define SUPDSSER_ERR_C (1U << 9) /* non-recovered comm. */ +#define SUPDSSER_ERR_T (1U << 8) /* non-recovered TDIE */ +#define SUPDSSER_ERR_M (1U << 1) /* recovered comm. */ +#define SUPDSSER_ERR_I (1U << 0) /* not implemented */ + +#define ARTISEA_SUPDDSCR 0x008 /* DPA SATA SControl register */ +#define SUPDDSCR_IPM_ANY (0 << 8) /* no IPM mode restrictions */ +#define SUPDDSCR_IPM_NO_PARTIAL (1U << 8) /* no PARTIAL mode */ +#define SUPDDSCR_IPM_NO_SLUMBER (2U << 8) /* no SLUMBER mode */ +#define SUPDDSCR_IPM_NONE (3U << 8) /* no PM allowed */ +#define SUPDDSCR_SPD_ANY (0 << 4) /* no speed restrictions */ +#define SUPDDSCR_SPD_G1 (1U << 4) /* <= Generation 1 */ +#define SUPDDSCR_DET_NORM (0 << 0) /* normal operation */ +#define SUPDDSCR_DET_INIT (1U << 0) /* comm. init */ +#define SUPDDSCR_DET_DISABLE (4U << 0) /* disable interface */ + +#define ARTISEA_SUPDSDBR 0x00c /* DPA Set Device Bits register */ + +#define ARTISEA_SUPDPFR 0x040 /* DPA PHY feature register */ +#define SUPDPFR_SSCEN (1U << 16) /* SSC enable */ +#define SUPDPFR_FVS (1U << 14) /* full voltage swing */ + +#define ARTISEA_SUPDBFCSR 0x044 /* DPA BIST FIS ctrl/stat register */ +#define SUPDBFCSR_PAT_D21_5 (0 << 30) /* D21.5s */ +#define SUPDBFCSR_PAT_D24_3 (1U << 30) /* D24.3s */ +#define SUPDBFCSR_PAT_D10_2 (2U << 30) /* D10.2 / K28.5 */ +#define SUPDBFCSR_PAT_COUNT (3U << 30) /* counting */ +#define SUPDBFCSR_CS_D21_5 (0 << 28) +#define SUPDBFCSR_CS_D24_3 (1U << 28) +#define SUPDBFCSR_CS_D10_2 (2U << 28) +#define SUPDBFCSR_CS_COUNT (3U << 30) +#define SUPDBFCSR_CLEAR_ERRS (1U << 25) /* clear errors/frames */ +#define SUPDBFCSR_CE (1U << 24) /* BIST check enable */ +#define SUPDBFCSR_PE (1U << 23) /* BIST pattern enable */ +#define SUPDBFCSR_K28_5 ((1U << 16) | \ + (1U << 8) /* send K28.5s */ +#define SUPDBFCSR_BIST_ACT_RX (1U << 15) /* BIST Act. FIS was rx'd */ +#define SUPDBFCSR_BIST_ACT_RX_TO (1U << 14) /* ...with transmit-only */ +#define SUPDBFCSR_BIST_ACT_RX_AB (1U << 13) /* ...with align-bypass */ +#define SUPDBFCSR_BIST_ACT_RX_SB (1U << 12) /* ...with scrambling-bypass */ +#define SUPDBFCSR_BIST_ACT_RX_RT (1U << 11) /* ...with retimed */ +#define SUPDBFCSR_BIST_ACT_RX_P (1U << 10) /* ...with primitive */ +#define SUPDBFCSR_BIST_ACT_RX_AFEL (1U << 9) /* ...with AFE loopback */ +#define SUPDBFCSR_BIST_ACT_TX (1U << 7) /* send BIST Act. FIS */ +#define SUPDBFCSR_BIST_ACT_TX_TO (1U << 6) /* ...with transmit-only */ +#define SUPDBFCSR_BIST_ACT_TX_AB (1U << 5) /* ...with align-bypass */ +#define SUPDBFCSR_BIST_ACT_TX_SB (1U << 4) /* ...with scrambling-bypass */ +#define SUPDBFCSR_BIST_ACT_TX_RT (1U << 3) /* ...with retimed */ +#define SUPDBFCSR_BIST_ACT_TX_P (1U << 2) /* ...with primitive */ +#define SUPDBFCSR_BIST_ACT_TX_AFEL (1U << 1) /* ...with AFE loopback */ +#define SUPDBFCSR_INIT_NE_TO (1U << 0) /* init. near-end tx-only */ + +#define ARTISEA_SUPDBER 0x048 /* DPA BIST errors register */ + +#define ARTISEA_SUPDBFR 0x04c /* DPA BIST frames register */ + +#define ARTISEA_SUPDHBDLR 0x050 /* DPA Host BIST data low register */ + +#define ARTISEA_SUPDHBDHR 0x054 /* DPA Host BIST data high register */ + +#define ARTISEA_SUPDDBDLR 0x058 /* DPA Device BIST data low */ + +#define ARTISEA_SUPDDBDHR 0x05c /* DPA Device BIST data high */ + +#define ARTISEA_SUPDDSFCSR 0x068 /* DPA DMA setup FIS ctrl/stat */ +#define SUPDDSFCSR_DIR (1U << 31) /* First Party setup FIS + word 0 direction bit + (1 == tx -> rx) */ +#define SUPDDSFCSR_INTR (1U << 30) /* rcvd's First Party setup + FIS with I bit set */ +#define SUPDDSFCSR_START_SETUP (1U << 28) /* send DMA setup FIS */ +#define SUPDDSFCSR_EN_FP_AP (1U << 27) /* enab. FP DMA auto-process */ +#define SUPDDSFCSR_ABORT_TSM (1U << 24) /* abort xport/link SMs */ + +#define ARTISEA_SUPDHDBILR 0x06c /* DPA Host DMA Buff. Id low */ + +#define ARTISEA_SUPDHDBIHR 0x070 /* DPA Host DMA Buff. Id high */ + +#define ARTISEA_SUPDHRDR0 0x074 /* DPA Host Resvd. DWORD 0 */ + +#define ARTISEA_SUPDHDBOR 0x078 /* DPA Host DMA Buff. offset */ + +#define ARTISEA_SUPDHDTCR 0x07c /* DPA Host DMA xfer count */ + +#define ARTISEA_SUPDHRDR1 0x080 /* DPA Host Resvd. DWORD 1 */ + +#define ARTISEA_SUPDDDBILR 0x084 /* DPA Device DMA Buff. Id low */ + +#define ARTISEA_SUPDDDBIHR 0x088 /* DPA Device DMA Buff. Id high */ + +#define ARTISEA_SUPDDRDR0 0x08c /* DPA Device Resvd. DWORD 0 */ + +#define ARTISEA_SUPDDDBOR 0x090 /* DPA Device DMA Buff. offset */ + +#define ARTISEA_SUPDDTCR 0x094 /* DPA Device DMA xfer count */ + +#define ARTISEA_SUPDDRDR1 0x09c /* DPA Device Resvd. DWORD 1 */ + +#endif /* _DEV_PCI_PCIIDE_I31244_REG_H_ */ -- cgit v1.2.3