From 5d68760cde9b70743da4d636206420ffa530a9d1 Mon Sep 17 00:00:00 2001
From: Nathan Binkert <nate@cvs.openbsd.org>
Date: Thu, 25 Jul 2002 02:18:12 +0000
Subject: get rid of trailing whitespace

---
 sys/dev/usb/ezload.c       | 10 ++---
 sys/dev/usb/hid.c          | 32 ++++++++--------
 sys/dev/usb/hid.h          |  4 +-
 sys/dev/usb/if_aue.c       | 16 ++++----
 sys/dev/usb/if_cue.c       | 20 +++++-----
 sys/dev/usb/if_kue.c       | 12 +++---
 sys/dev/usb/if_upl.c       |  8 ++--
 sys/dev/usb/if_url.c       | 42 ++++++++++-----------
 sys/dev/usb/ohcireg.h      |  4 +-
 sys/dev/usb/uaudioreg.h    |  4 +-
 sys/dev/usb/ucom.c         | 40 ++++++++++----------
 sys/dev/usb/udsbr.c        |  4 +-
 sys/dev/usb/uftdi.c        | 10 ++---
 sys/dev/usb/uftdireg.h     | 64 +++++++++++++++----------------
 sys/dev/usb/ugen.c         | 14 +++----
 sys/dev/usb/uhcireg.h      |  6 +--
 sys/dev/usb/uhcivar.h      |  8 ++--
 sys/dev/usb/uhid.c         | 12 +++---
 sys/dev/usb/uhidev.c       | 22 +++++------
 sys/dev/usb/uhub.c         | 36 +++++++++---------
 sys/dev/usb/ukbd.c         | 30 +++++++--------
 sys/dev/usb/ukbdmap.c      |  6 +--
 sys/dev/usb/ulpt.c         | 10 ++---
 sys/dev/usb/umass.c        | 94 +++++++++++++++++++++++-----------------------
 sys/dev/usb/umct.c         | 16 ++++----
 sys/dev/usb/umidi.c        |  8 ++--
 sys/dev/usb/umidivar.h     |  6 +--
 sys/dev/usb/umodem.c       | 12 +++---
 sys/dev/usb/ums.c          | 10 ++---
 sys/dev/usb/uplcom.c       | 26 ++++++-------
 sys/dev/usb/urio.c         | 12 +++---
 sys/dev/usb/usb.c          | 30 +++++++--------
 sys/dev/usb/usb.h          | 12 +++---
 sys/dev/usb/usb_mem.c      | 12 +++---
 sys/dev/usb/usb_mem.h      |  4 +-
 sys/dev/usb/usb_port.h     |  4 +-
 sys/dev/usb/usb_quirks.c   |  8 ++--
 sys/dev/usb/usb_subr.c     | 44 +++++++++++-----------
 sys/dev/usb/usbdevs        |  4 +-
 sys/dev/usb/usbdevs.h      |  6 +--
 sys/dev/usb/usbdevs_data.h |  4 +-
 sys/dev/usb/usbdi.c        | 66 ++++++++++++++++----------------
 sys/dev/usb/usbdi.h        |  8 ++--
 sys/dev/usb/usbdi_util.c   | 22 +++++------
 sys/dev/usb/usbdi_util.h   |  8 ++--
 sys/dev/usb/usbdivar.h     |  6 +--
 sys/dev/usb/uscanner.c     |  8 ++--
 sys/dev/usb/usscanner.c    | 16 ++++----
 sys/dev/usb/uvisor.c       |  6 +--
 sys/dev/usb/uyap.c         |  8 ++--
 50 files changed, 437 insertions(+), 437 deletions(-)

(limited to 'sys/dev')

diff --git a/sys/dev/usb/ezload.c b/sys/dev/usb/ezload.c
index c060048c9ee..0ea3b9b980e 100644
--- a/sys/dev/usb/ezload.c
+++ b/sys/dev/usb/ezload.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ezload.c,v 1.4 2002/05/05 22:23:43 nate Exp $ */
+/*	$OpenBSD: ezload.c,v 1.5 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: ezload.c,v 1.4 2001/11/13 06:24:53 lukem Exp $	*/
 
 /*
@@ -93,7 +93,7 @@ ezload_reset(usbd_device_handle dev, int reset)
 {
 	usb_device_request_t req;
 	uByte rst;
-	
+
 	DPRINTF(("ezload_reset: reset=%d\n", reset));
 
 	rst = reset ? ANCHOR_RESET : 0;
@@ -112,9 +112,9 @@ ezload_download(usbd_device_handle dev, const struct ezdata *rec)
 	const struct ezdata *ptr;
 	usbd_status err;
 	u_int len, offs;
-	
+
 	DPRINTF(("ezload_down record=%p\n", rec));
-	
+
 	for (ptr = rec; ptr->length != 0; ptr++) {
 
 #if 0
@@ -140,7 +140,7 @@ ezload_download(usbd_device_handle dev, const struct ezdata *rec)
 		if (err)
 			break;
 	}
-	
+
 	return (err);
 }
 
diff --git a/sys/dev/usb/hid.c b/sys/dev/usb/hid.c
index 81deacbd866..2f3823c2687 100644
--- a/sys/dev/usb/hid.c
+++ b/sys/dev/usb/hid.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: hid.c,v 1.12 2002/05/09 15:06:29 nate Exp $ */
+/*	$OpenBSD: hid.c,v 1.13 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: hid.c,v 1.22 2002/01/12 17:11:03 tsutsui Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/hid.c,v 1.11 1999/11/17 22:33:39 n_hibma Exp $ */
 
@@ -45,7 +45,7 @@
 #include <sys/kernel.h>
 #endif
 #include <sys/malloc.h>
- 
+
 #include <dev/usb/usb.h>
 #include <dev/usb/usbhid.h>
 
@@ -199,7 +199,7 @@ hid_get_item(struct hid_data *s, struct hid_item *h)
 			printf("BAD LENGTH %d\n", bSize);
 			continue;
 		}
-		
+
 		DPRINTFN(5,("hid_get_item: bType=%d bTag=%d dval=%d\n",
 			 bType, bTag, dval));
 		switch (bType) {
@@ -221,8 +221,8 @@ hid_get_item(struct hid_data *s, struct hid_item *h)
 					s->multi = 0;
 					c->loc.count = 1;
 					if (s->minset) {
-						for (i = c->usage_minimum; 
-						     i <= c->usage_maximum; 
+						for (i = c->usage_minimum;
+						     i <= c->usage_maximum;
 						     i++) {
 							s->usages[s->nu] = i;
 							if (s->nu < MAXUSAGE-1)
@@ -235,7 +235,7 @@ hid_get_item(struct hid_data *s, struct hid_item *h)
 					c->usage = c->_usage_page; /* XXX */
 					*h = *c;
 					h->next = NULL;
-					c->loc.pos += 
+					c->loc.pos +=
 					    c->loc.size * c->loc.count;
 					s->minset = 0;
 					s->nu = 0;
@@ -320,9 +320,9 @@ hid_get_item(struct hid_data *s, struct hid_item *h)
 		case 2:		/* Local */
 			switch (bTag) {
 			case 0:
-				if (bSize == 1) 
+				if (bSize == 1)
 					dval = c->_usage_page | (dval&0xff);
-				else if (bSize == 2) 
+				else if (bSize == 2)
 					dval = c->_usage_page | (dval&0xffff);
 				c->usage = dval;
 				if (s->nu < MAXUSAGE)
@@ -331,16 +331,16 @@ hid_get_item(struct hid_data *s, struct hid_item *h)
 				break;
 			case 1:
 				s->minset = 1;
-				if (bSize == 1) 
+				if (bSize == 1)
 					dval = c->_usage_page | (dval&0xff);
-				else if (bSize == 2) 
+				else if (bSize == 2)
 					dval = c->_usage_page | (dval&0xffff);
 				c->usage_minimum = dval;
 				break;
 			case 2:
-				if (bSize == 1) 
+				if (bSize == 1)
 					dval = c->_usage_page | (dval&0xff);
-				else if (bSize == 2) 
+				else if (bSize == 2)
 					dval = c->_usage_page | (dval&0xffff);
 				c->usage_maximum = dval;
 				break;
@@ -421,7 +421,7 @@ hid_locate(void *desc, int size, u_int32_t u, u_int8_t id, enum hid_kind k,
 	for (d = hid_start_parse(desc, size, k); hid_get_item(d, &h); ) {
 		DPRINTFN(5,("hid_locate: usage=0x%x kind=%d id=%d flags=0x%x\n",
 			    h.usage, h.kind, h.report_ID, h.flags));
-		if (h.kind == k && !(h.flags & HIO_CONST) && 
+		if (h.kind == k && !(h.flags & HIO_CONST) &&
 		    h.usage == u && h.report_ID == id) {
 			if (loc != NULL)
 				*loc = h.loc;
@@ -450,7 +450,7 @@ hid_get_data(u_char *buf, struct hid_location *loc)
 		return (0);
 
 	data = 0;
-	s = hpos / 8; 
+	s = hpos / 8;
 	for (i = hpos; i < hpos+hsize; i += 8)
 		data |= buf[i / 8] << ((i / 8 - s) * 8);
 	data >>= hpos % 8;
@@ -458,7 +458,7 @@ hid_get_data(u_char *buf, struct hid_location *loc)
 	hsize = 32 - hsize;
 	/* Sign extend */
 	data = ((int32_t)data << hsize) >> hsize;
-	DPRINTFN(10,("hid_get_data: loc %d/%d = %lu\n", 
+	DPRINTFN(10,("hid_get_data: loc %d/%d = %lu\n",
 		    loc->pos, loc->size, (long)data));
 	return (data);
 }
@@ -479,7 +479,7 @@ hid_is_collection(void *desc, int size, u_int8_t id, u_int32_t usage)
 		DPRINTFN(2,("hid_is_collection: kind=%d id=%d usage=0x%x"
 			    "(0x%x)\n",
 			    hi.kind, hi.report_ID, hi.usage, coll_usage));
-		if (hi.kind == hid_collection && 
+		if (hi.kind == hid_collection &&
 		    hi.collection == HCOLL_APPLICATION)
 			coll_usage = hi.usage;
 		if (hi.kind == hid_endcollection &&
diff --git a/sys/dev/usb/hid.h b/sys/dev/usb/hid.h
index 18dac5988e5..230c1bcbe85 100644
--- a/sys/dev/usb/hid.h
+++ b/sys/dev/usb/hid.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: hid.h,v 1.7 2002/05/09 15:06:29 nate Exp $ */
+/*	$OpenBSD: hid.h,v 1.8 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: hid.h,v 1.7 2001/12/28 17:32:36 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/hid.h,v 1.7 1999/11/17 22:33:40 n_hibma Exp $ */
 
@@ -39,7 +39,7 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-enum hid_kind { 
+enum hid_kind {
 	hid_input,
 	hid_output,
 	hid_feature,
diff --git a/sys/dev/usb/if_aue.c b/sys/dev/usb/if_aue.c
index f412529e800..410fd59721c 100644
--- a/sys/dev/usb/if_aue.c
+++ b/sys/dev/usb/if_aue.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: if_aue.c,v 1.24 2002/07/10 18:08:13 deraadt Exp $ */
+/*	$OpenBSD: if_aue.c,v 1.25 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: if_aue.c,v 1.78 2002/07/08 17:46:23 augustss Exp $	*/
 /*
  * Copyright (c) 1997, 1998, 1999, 2000
@@ -118,7 +118,7 @@
 #if defined(__NetBSD__)
 #include <net/if_ether.h>
 #ifdef INET
-#include <netinet/in.h> 
+#include <netinet/in.h>
 #include <netinet/if_inarp.h>
 #endif
 #endif /* defined(__NetBSD__) */
@@ -567,7 +567,7 @@ aue_miibus_statchg(device_ptr_t dev)
 #define AUE_POLY	0xEDB88320
 #define AUE_BITS	6
 
-Static u_int32_t 
+Static u_int32_t
 aue_crc(caddr_t addr)
 {
 	u_int32_t		idx, bit, data, crc;
@@ -677,10 +677,10 @@ aue_reset(struct aue_softc *sc)
   	 */
 	if (sc->aue_flags & LSYS) {
 		/* Grrr. LinkSys has to be different from everyone else. */
-		aue_csr_write_1(sc, AUE_GPIO0, 
+		aue_csr_write_1(sc, AUE_GPIO0,
 		    AUE_GPIO_SEL0 | AUE_GPIO_SEL1);
 	} else {
-		aue_csr_write_1(sc, AUE_GPIO0, 
+		aue_csr_write_1(sc, AUE_GPIO0,
 		    AUE_GPIO_OUT0 | AUE_GPIO_SEL0);
 	}
   	aue_csr_write_1(sc, AUE_GPIO0,
@@ -904,7 +904,7 @@ USB_DETACH(aue)
 	}
 	splx(s);
 
-	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->aue_udev, 
+	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->aue_udev,
 			   USBDEV(sc->aue_dev));
 
 	return (0);
@@ -968,7 +968,7 @@ aue_newbuf(struct aue_softc *sc, struct aue_chain *c, struct mbuf *m)
 	return (0);
 }
 
-Static int 
+Static int
 aue_rx_list_init(struct aue_softc *sc)
 {
 	struct aue_cdata	*cd;
@@ -1465,7 +1465,7 @@ aue_openpipes(struct aue_softc *sc)
 	}
 	err = usbd_open_pipe_intr(sc->aue_iface, sc->aue_ed[AUE_ENDPT_INTR],
 	    USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_INTR], sc,
-	    &sc->aue_cdata.aue_ibuf, AUE_INTR_PKTLEN, aue_intr, 
+	    &sc->aue_cdata.aue_ibuf, AUE_INTR_PKTLEN, aue_intr,
 	    AUE_INTR_INTERVAL);
 	if (err) {
 		printf("%s: open intr pipe failed: %s\n",
diff --git a/sys/dev/usb/if_cue.c b/sys/dev/usb/if_cue.c
index 7bdc262e006..91cb154557c 100644
--- a/sys/dev/usb/if_cue.c
+++ b/sys/dev/usb/if_cue.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: if_cue.c,v 1.15 2002/07/10 18:08:13 deraadt Exp $ */
+/*	$OpenBSD: if_cue.c,v 1.16 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: if_cue.c,v 1.39 2002/07/08 17:46:24 augustss Exp $	*/
 /*
  * Copyright (c) 1997, 1998, 1999, 2000
@@ -96,7 +96,7 @@
 #if defined(__NetBSD__)
 #include <net/if_ether.h>
 #ifdef INET
-#include <netinet/in.h> 
+#include <netinet/in.h>
 #include <netinet/if_inarp.h>
 #endif
 #endif /* defined(__NetBSD__) */
@@ -203,7 +203,7 @@ cue_csr_read_1(struct cue_softc *sc, int reg)
 		return (0);
 	}
 
-	DPRINTFN(10,("%s: cue_csr_read_1 reg=0x%x val=0x%x\n", 
+	DPRINTFN(10,("%s: cue_csr_read_1 reg=0x%x val=0x%x\n",
 		     USBDEVNAME(sc->cue_dev), reg, val));
 
 	return (val);
@@ -227,7 +227,7 @@ cue_csr_read_2(struct cue_softc *sc, int reg)
 
 	err = usbd_do_request(sc->cue_udev, &req, &val);
 
-	DPRINTFN(10,("%s: cue_csr_read_2 reg=0x%x val=0x%x\n", 
+	DPRINTFN(10,("%s: cue_csr_read_2 reg=0x%x val=0x%x\n",
 		     USBDEVNAME(sc->cue_dev), reg, UGETW(val)));
 
 	if (err) {
@@ -248,7 +248,7 @@ cue_csr_write_1(struct cue_softc *sc, int reg, int val)
 	if (sc->cue_dying)
 		return (0);
 
-	DPRINTFN(10,("%s: cue_csr_write_1 reg=0x%x val=0x%x\n", 
+	DPRINTFN(10,("%s: cue_csr_write_1 reg=0x%x val=0x%x\n",
 		     USBDEVNAME(sc->cue_dev), reg, val));
 
 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
@@ -265,7 +265,7 @@ cue_csr_write_1(struct cue_softc *sc, int reg, int val)
 		return (-1);
 	}
 
-	DPRINTFN(20,("%s: cue_csr_write_1, after reg=0x%x val=0x%x\n", 
+	DPRINTFN(20,("%s: cue_csr_write_1, after reg=0x%x val=0x%x\n",
 		     USBDEVNAME(sc->cue_dev), reg, cue_csr_read_1(sc, reg)));
 
 	return (0);
@@ -283,7 +283,7 @@ cue_csr_write_2(struct cue_softc *sc, int reg, int aval)
 	if (sc->cue_dying)
 		return (0);
 
-	DPRINTFN(10,("%s: cue_csr_write_2 reg=0x%x val=0x%x\n", 
+	DPRINTFN(10,("%s: cue_csr_write_2 reg=0x%x val=0x%x\n",
 		     USBDEVNAME(sc->cue_dev), reg, aval));
 
 	USETW(val, aval);
@@ -388,7 +388,7 @@ cue_setmulti(struct cue_softc *sc)
 
 	ifp = GET_IFP(sc);
 
-	DPRINTFN(2,("%s: cue_setmulti if_flags=0x%x\n", 
+	DPRINTFN(2,("%s: cue_setmulti if_flags=0x%x\n",
 		    USBDEVNAME(sc->cue_dev), ifp->if_flags));
 
 	if (ifp->if_flags & IFF_PROMISC) {
@@ -417,7 +417,7 @@ allmulti:
 			goto allmulti;
 
 		h = cue_crc(enm->enm_addrlo);
-		sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);		
+		sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);
 		ETHER_NEXT_MULTI(step, enm);
 	}
 
@@ -429,7 +429,7 @@ allmulti:
 	 */
 	if (ifp->if_flags & IFF_BROADCAST) {
 		h = cue_crc(etherbroadcastaddr);
-		sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);		
+		sc->cue_mctab[h >> 3] |= 1 << (h & 0x7);
 	}
 
 	cue_mem(sc, CUE_CMD_WRITESRAM, CUE_MCAST_TABLE_ADDR,
diff --git a/sys/dev/usb/if_kue.c b/sys/dev/usb/if_kue.c
index b6f2ae5bab0..39afbc6b1f6 100644
--- a/sys/dev/usb/if_kue.c
+++ b/sys/dev/usb/if_kue.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: if_kue.c,v 1.20 2002/07/10 18:08:13 deraadt Exp $ */
+/*	$OpenBSD: if_kue.c,v 1.21 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: if_kue.c,v 1.48 2002/07/08 17:46:24 augustss Exp $	*/
 /*
  * Copyright (c) 1997, 1998, 1999, 2000
@@ -106,7 +106,7 @@
 #if defined(__NetBSD__)
 #include <net/if_ether.h>
 #ifdef INET
-#include <netinet/in.h> 
+#include <netinet/in.h>
 #include <netinet/if_inarp.h>
 #endif
 #endif /* defined (__NetBSD__) */
@@ -281,7 +281,7 @@ kue_load_fw(struct kue_softc *sc)
 	       USBDEVNAME(sc->kue_dev));
 
 	/* Load code segment */
-	DPRINTFN(1,("%s: kue_load_fw: download code_seg\n", 
+	DPRINTFN(1,("%s: kue_load_fw: download code_seg\n",
 		    USBDEVNAME(sc->kue_dev)));
 	err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
 	    0, (void *)kue_code_seg, sizeof(kue_code_seg));
@@ -292,7 +292,7 @@ kue_load_fw(struct kue_softc *sc)
 	}
 
 	/* Load fixup segment */
-	DPRINTFN(1,("%s: kue_load_fw: download fix_seg\n", 
+	DPRINTFN(1,("%s: kue_load_fw: download fix_seg\n",
 		    USBDEVNAME(sc->kue_dev)));
 	err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
 	    0, (void *)kue_fix_seg, sizeof(kue_fix_seg));
@@ -303,7 +303,7 @@ kue_load_fw(struct kue_softc *sc)
 	}
 
 	/* Send trigger command. */
-	DPRINTFN(1,("%s: kue_load_fw: download trig_seg\n", 
+	DPRINTFN(1,("%s: kue_load_fw: download trig_seg\n",
 		    USBDEVNAME(sc->kue_dev)));
 	err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN,
 	    0, (void *)kue_trig_seg, sizeof(kue_trig_seg));
@@ -754,7 +754,7 @@ kue_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
 	usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
 
 	DPRINTFN(10,("%s: %s: total_len=%d len=%d\n", USBDEVNAME(sc->kue_dev),
-		     __func__, total_len, 
+		     __func__, total_len,
 		     UGETW(mtod(c->kue_mbuf, u_int8_t *))));
 
 	if (total_len <= 1)
diff --git a/sys/dev/usb/if_upl.c b/sys/dev/usb/if_upl.c
index 5dc5918343e..92e14c10336 100644
--- a/sys/dev/usb/if_upl.c
+++ b/sys/dev/usb/if_upl.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: if_upl.c,v 1.10 2002/06/30 13:04:36 itojun Exp $ */
+/*	$OpenBSD: if_upl.c,v 1.11 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: if_upl.c,v 1.15 2001/06/14 05:44:27 itojun Exp $	*/
 /*
  * Copyright (c) 2000 The NetBSD Foundation, Inc.
@@ -80,8 +80,8 @@
 
 #if defined(__NetBSD__)
 #ifdef INET
-#include <netinet/in.h> 
-#include <netinet/in_var.h> 
+#include <netinet/in.h>
+#include <netinet/in_var.h>
 #include <netinet/if_inarp.h>
 #else
 #error upl without INET?
@@ -816,7 +816,7 @@ upl_openpipes(struct upl_softc *sc)
 	}
 	err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_ed[UPL_ENDPT_INTR],
 	    USBD_EXCLUSIVE_USE, &sc->sc_ep[UPL_ENDPT_INTR], sc,
-	    &sc->sc_ibuf, UPL_INTR_PKTLEN, upl_intr, 
+	    &sc->sc_ibuf, UPL_INTR_PKTLEN, upl_intr,
 	    UPL_INTR_INTERVAL);
 	if (err) {
 		printf("%s: open intr pipe failed: %s\n",
diff --git a/sys/dev/usb/if_url.c b/sys/dev/usb/if_url.c
index 283ef1db96a..bcedf7ffcf8 100644
--- a/sys/dev/usb/if_url.c
+++ b/sys/dev/usb/if_url.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: if_url.c,v 1.6 2002/07/10 18:08:13 deraadt Exp $ */
+/*	$OpenBSD: if_url.c,v 1.7 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: if_url.c,v 1.2 2002/03/28 21:49:19 ichiro Exp $	*/
 /*
  * Copyright (c) 2001, 2002
@@ -82,7 +82,7 @@
 #if defined(__NetBSD__)
 #include <net/if_ether.h>
 #ifdef INET
-#include <netinet/in.h> 
+#include <netinet/in.h>
 #include <netinet/if_inarp.h>
 #endif
 #endif /* defined(__NetBSD__) */
@@ -433,7 +433,7 @@ url_mem(struct url_softc *sc, int cmd, int offset, void *buf, int len)
 			 USBDEVNAME(sc->sc_dev),
 			 cmd == URL_CMD_READMEM ? "read" : "write",
 			 offset, err));
-	}	
+	}
 
 	return (err);
 }
@@ -449,7 +449,7 @@ url_csr_read_1(struct url_softc *sc, int reg)
 
 	if (sc->sc_dying)
 		return (0);
-	
+
 	return (url_mem(sc, URL_CMD_READMEM, reg, &val, 1) ? 0 : val);
 }
 
@@ -464,7 +464,7 @@ url_csr_read_2(struct url_softc *sc, int reg)
 
 	if (sc->sc_dying)
 		return (0);
-	
+
 	USETW(val, 0);
 	return (url_mem(sc, URL_CMD_READMEM, reg, &val, 2) ? 0 : UGETW(val));
 }
@@ -480,7 +480,7 @@ url_csr_write_1(struct url_softc *sc, int reg, int aval)
 
 	if (sc->sc_dying)
 		return (0);
-	
+
 	return (url_mem(sc, URL_CMD_WRITEMEM, reg, &val, 1) ? -1 : 0);
 }
 
@@ -497,7 +497,7 @@ url_csr_write_2(struct url_softc *sc, int reg, int aval)
 
 	if (sc->sc_dying)
 		return (0);
-	
+
 	return (url_mem(sc, URL_CMD_WRITEMEM, reg, &val, 2) ? -1 : 0);
 }
 
@@ -514,7 +514,7 @@ url_csr_write_4(struct url_softc *sc, int reg, int aval)
 
 	if (sc->sc_dying)
 		return (0);
-	
+
 	return (url_mem(sc, URL_CMD_WRITEMEM, reg, &val, 4) ? -1 : 0);
 }
 
@@ -527,7 +527,7 @@ url_init(struct ifnet *ifp)
 	int i, s;
 
 	DPRINTF(("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
-	
+
 	if (sc->sc_dying)
 		return (EIO);
 
@@ -563,7 +563,7 @@ url_init(struct ifnet *ifp)
 	else
 		URL_CLRBIT2(sc, URL_RCR, URL_RCR_AAM|URL_RCR_AAP);
 
-	
+
 	/* Initialize transmit ring */
 	if (url_tx_list_init(sc) == ENOBUFS) {
 		printf("%s: tx list init failed\n", USBDEVNAME(sc->sc_dev));
@@ -607,7 +607,7 @@ Static void
 url_reset(struct url_softc *sc)
 {
 	int i;
-	
+
 	DPRINTF(("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
 
 	if (sc->sc_dying)
@@ -720,7 +720,7 @@ url_openpipes(struct url_softc *sc)
 
 	if (sc->sc_dying)
 		return (EIO);
-	
+
 	sc->sc_refcnt++;
 
 	/* Open RX pipe */
@@ -732,7 +732,7 @@ url_openpipes(struct url_softc *sc)
 		error = EIO;
 		goto done;
 	}
-	
+
 	/* Open TX pipe */
 	err = usbd_open_pipe(sc->sc_ctl_iface, sc->sc_bulkout_no,
 			     USBD_EXCLUSIVE_USE, &sc->sc_pipe_tx);
@@ -774,7 +774,7 @@ url_openpipes(struct url_softc *sc)
  done:
 	if (--sc->sc_refcnt < 0)
 		usb_detach_wakeup(USBDEV(sc->sc_dev));
-	
+
 	return (error);
 }
 
@@ -811,7 +811,7 @@ url_newbuf(struct url_softc *sc, struct url_chain *c, struct mbuf *m)
 
 	return (0);
 }
-	
+
 
 Static int
 url_rx_list_init(struct url_softc *sc)
@@ -840,7 +840,7 @@ url_rx_list_init(struct url_softc *sc)
 			}
 		}
 	}
-	
+
 	return (0);
 }
 
@@ -870,7 +870,7 @@ url_tx_list_init(struct url_softc *sc)
 			}
 		}
 	}
-	
+
 	return (0);
 }
 
@@ -879,7 +879,7 @@ url_start(struct ifnet *ifp)
 {
 	struct url_softc *sc = ifp->if_softc;
 	struct mbuf *m_head = NULL;
-	
+
 	DPRINTF(("%s: %s: enter, link=%d\n", USBDEVNAME(sc->sc_dev),
 		 __func__, sc->sc_link));
 
@@ -1211,7 +1211,7 @@ url_watchdog(struct ifnet *ifp)
 	struct url_chain *c;
 	usbd_status stat;
 	int s;
-	
+
 	DPRINTF(("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
 
 	ifp->if_oerrors++;
@@ -1240,7 +1240,7 @@ url_stop(struct ifnet *ifp, int disable)
 	struct url_softc *sc = ifp->if_softc;
 	usbd_status err;
 	int i;
-	
+
 	DPRINTF(("%s: %s: enter\n", USBDEVNAME(sc->sc_dev), __func__));
 
 	ifp->if_timer = 0;
@@ -1642,7 +1642,7 @@ url_ext_miibus_redreg(device_ptr_t dev, int phy, int reg)
 	if (i == URL_TIMEOUT) {
 		printf("%s: MII read timed out\n", USBDEVNAME(sc->sc_dev));
 	}
-	
+
 	val = url_csr_read_2(sc, URL_PHYDAT);
 
 	DPRINTF(("%s: %s: phy=%d reg=0x%04x => 0x%04x\n",
diff --git a/sys/dev/usb/ohcireg.h b/sys/dev/usb/ohcireg.h
index ab6f4cecf6b..0be0ac497c7 100644
--- a/sys/dev/usb/ohcireg.h
+++ b/sys/dev/usb/ohcireg.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ohcireg.h,v 1.9 2000/11/08 18:10:37 aaron Exp $ */
+/*	$OpenBSD: ohcireg.h,v 1.10 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: ohcireg.h,v 1.18 2000/04/27 15:26:47 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/ohcireg.h,v 1.8 1999/11/17 22:33:40 n_hibma Exp $	*/
 
@@ -226,7 +226,7 @@ typedef struct {
 } ohci_itd_t;
 /* #define OHCI_ITD_SIZE 32 */
 #define OHCI_ITD_ALIGN 32
-	
+
 
 #define OHCI_CC_NO_ERROR		0
 #define OHCI_CC_CRC			1
diff --git a/sys/dev/usb/uaudioreg.h b/sys/dev/usb/uaudioreg.h
index 98923993375..149c968d9cc 100644
--- a/sys/dev/usb/uaudioreg.h
+++ b/sys/dev/usb/uaudioreg.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uaudioreg.h,v 1.8 2002/05/06 23:07:26 nate Exp $ */
+/*	$OpenBSD: uaudioreg.h,v 1.9 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: uaudioreg.h,v 1.8 2002/03/07 14:37:03 kent Exp $	*/
 
 /*
@@ -63,7 +63,7 @@ typedef struct {
 	uByte		bmAttributes;
 	uWord		wMaxPacketSize;
 	uByte		bInterval;
-	/* 
+	/*
 	 * The following two entries are only used by the Audio Class.
 	 * And according to the specs the Audio Class is the only one
 	 * allowed to extend the endpoint descriptor.
diff --git a/sys/dev/usb/ucom.c b/sys/dev/usb/ucom.c
index 03f87deabb5..d548925cf94 100644
--- a/sys/dev/usb/ucom.c
+++ b/sys/dev/usb/ucom.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ucom.c,v 1.14 2002/07/11 03:11:17 nate Exp $ */
+/*	$OpenBSD: ucom.c,v 1.15 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: ucom.c,v 1.42 2002/03/17 19:41:04 atatat Exp $	*/
 
 /*
@@ -217,7 +217,7 @@ USB_DETACH(ucom)
 	int maj, mn;
 	int s;
 
-	DPRINTF(("ucom_detach: sc=%p flags=%d tp=%p, pipe=%d,%d\n", 
+	DPRINTF(("ucom_detach: sc=%p flags=%d tp=%p, pipe=%d,%d\n",
 		 sc, flags, tp, sc->sc_bulkin_no, sc->sc_bulkout_no));
 
 	sc->sc_dying = 1;
@@ -311,7 +311,7 @@ ucomopen(dev_t dev, int flag, int mode, usb_proc_ptr p)
 	struct tty *tp;
 	int s;
 	int error;
- 
+
 	if (unit >= ucom_cd.cd_ndevs)
 		return (ENXIO);
 	sc = ucom_cd.cd_devs[unit];
@@ -346,7 +346,7 @@ ucomopen(dev_t dev, int flag, int mode, usb_proc_ptr p)
 		return (EIO);
 	}
 	sc->sc_opening = 1;
-	
+
 #if defined(__NetBSD__)
 	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
 #else
@@ -412,7 +412,7 @@ ucomopen(dev_t dev, int flag, int mode, usb_proc_ptr p)
 				     &sc->sc_bulkin_pipe);
 		if (err) {
 			DPRINTF(("%s: open bulk out error (addr %d), err=%s\n",
-				 USBDEVNAME(sc->sc_dev), sc->sc_bulkin_no, 
+				 USBDEVNAME(sc->sc_dev), sc->sc_bulkin_no,
 				 usbd_errstr(err)));
 			error = EIO;
 			goto fail_0;
@@ -426,7 +426,7 @@ ucomopen(dev_t dev, int flag, int mode, usb_proc_ptr p)
 			error = EIO;
 			goto fail_1;
 		}
-		
+
 		/* Allocate a request and an input buffer and start reading. */
 		sc->sc_ixfer = usbd_alloc_xfer(sc->sc_udev);
 		if (sc->sc_ixfer == NULL) {
@@ -545,7 +545,7 @@ ucomclose(dev_t dev, int flag, int mode, usb_proc_ptr p)
 
 	return (0);
 }
- 
+
 int
 ucomread(dev_t dev, struct uio *uio, int flag)
 {
@@ -555,14 +555,14 @@ ucomread(dev_t dev, struct uio *uio, int flag)
 
 	if (sc->sc_dying)
 		return (EIO);
- 
+
 	sc->sc_refcnt++;
 	error = (*LINESW(tp, l_read))(tp, uio, flag);
 	if (--sc->sc_refcnt < 0)
 		usb_detach_wakeup(USBDEV(sc->sc_dev));
 	return (error);
 }
- 
+
 int
 ucomwrite(dev_t dev, struct uio *uio, int flag)
 {
@@ -572,7 +572,7 @@ ucomwrite(dev_t dev, struct uio *uio, int flag)
 
 	if (sc->sc_dying)
 		return (EIO);
- 
+
 	sc->sc_refcnt++;
 	error = (*LINESW(tp, l_write))(tp, uio, flag);
 	if (--sc->sc_refcnt < 0)
@@ -590,7 +590,7 @@ ucompoll(dev_t dev, int events, usb_proc_ptr p)
 
 	if (sc->sc_dying)
 		return (EIO);
- 
+
 	sc->sc_refcnt++;
 	error = (*LINESW(tp, l_poll))(tp, events, p);
 	if (--sc->sc_refcnt < 0)
@@ -631,7 +631,7 @@ ucom_do_ioctl(struct ucom_softc *sc, u_long cmd, caddr_t data,
 
 	if (sc->sc_dying)
 		return (EIO);
- 
+
 	DPRINTF(("ucomioctl: cmd=0x%08lx\n", cmd));
 
 	error = (*LINESW(tp, l_ioctl))(tp, cmd, data, flag, p);
@@ -676,7 +676,7 @@ ucom_do_ioctl(struct ucom_softc *sc, u_long cmd, caddr_t data,
 		break;
 
 	case TIOCSFLAGS:
-		error = suser(p->p_ucred, &p->p_acflag); 
+		error = suser(p->p_ucred, &p->p_acflag);
 		if (error)
 			break;
 		sc->sc_swflags = *(int *)data;
@@ -712,7 +712,7 @@ tiocm_to_ucom(struct ucom_softc *sc, u_long how, int ttybits)
 		SET(combits, UMCR_DTR);
 	if (ISSET(ttybits, TIOCM_RTS))
 		SET(combits, UMCR_RTS);
- 
+
 	switch (how) {
 	case TIOCMBIC:
 		CLR(sc->sc_mcr, combits);
@@ -783,7 +783,7 @@ ucom_dtr(struct ucom_softc *sc, int onoff)
 	DPRINTF(("ucom_dtr: onoff=%d\n", onoff));
 
 	if (sc->sc_methods->ucom_set != NULL)
-		sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno, 
+		sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno,
 		    UCOM_SET_DTR, onoff);
 }
 
@@ -793,7 +793,7 @@ ucom_rts(struct ucom_softc *sc, int onoff)
 	DPRINTF(("ucom_rts: onoff=%d\n", onoff));
 
 	if (sc->sc_methods->ucom_set != NULL)
-		sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno, 
+		sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno,
 		    UCOM_SET_RTS, onoff);
 }
 
@@ -962,7 +962,7 @@ ucomstart(struct tty *tp)
 		memcpy(sc->sc_obuf, data, cnt);
 
 	DPRINTFN(4,("ucomstart: %d chars\n", cnt));
-	usbd_setup_xfer(sc->sc_oxfer, sc->sc_bulkout_pipe, 
+	usbd_setup_xfer(sc->sc_oxfer, sc->sc_bulkout_pipe,
 			(usbd_private_handle)sc, sc->sc_obuf, cnt,
 			USBD_NO_COPY, USBD_NO_TIMEOUT, ucomwritecb);
 	/* What can we do on error? */
@@ -1052,8 +1052,8 @@ ucomstartread(struct ucom_softc *sc)
 	usbd_status err;
 
 	DPRINTFN(5,("ucomstartread: start\n"));
-	usbd_setup_xfer(sc->sc_ixfer, sc->sc_bulkin_pipe, 
-			(usbd_private_handle)sc, 
+	usbd_setup_xfer(sc->sc_ixfer, sc->sc_bulkin_pipe,
+			(usbd_private_handle)sc,
 			sc->sc_ibuf, sc->sc_ibufsize,
 			USBD_SHORT_XFER_OK | USBD_NO_COPY,
 			USBD_NO_TIMEOUT, ucomreadcb);
@@ -1064,7 +1064,7 @@ ucomstartread(struct ucom_softc *sc)
 	}
 	return (USBD_NORMAL_COMPLETION);
 }
- 
+
 Static void
 ucomreadcb(usbd_xfer_handle xfer, usbd_private_handle p, usbd_status status)
 {
diff --git a/sys/dev/usb/udsbr.c b/sys/dev/usb/udsbr.c
index 1ded0778657..1d9f0f99a52 100644
--- a/sys/dev/usb/udsbr.c
+++ b/sys/dev/usb/udsbr.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: udsbr.c,v 1.3 2002/07/09 18:37:04 nate Exp $	*/
+/*	$OpenBSD: udsbr.c,v 1.4 2002/07/25 02:18:10 nate Exp $	*/
 /*	$NetBSD: udsbr.c,v 1.6 2002/02/12 10:51:49 tron Exp $	*/
 
 /*
@@ -229,7 +229,7 @@ udsbr_setfreq(struct udsbr_softc *sc, int freq)
          * that the radio wants.  This frequency is 10.7MHz above
          * the actual frequency.  We then need to convert to
          * units of 12.5kHz.  We add one to the IFM to make rounding
-         * easier. 
+         * easier.
          */
         freq = (freq * 1000 + 10700001) / 12500;
 	(void)udsbr_req(sc, 0x01, (freq >> 8) & 0xff, freq & 0xff);
diff --git a/sys/dev/usb/uftdi.c b/sys/dev/usb/uftdi.c
index 99c7dab87d3..f02d9ec0f20 100644
--- a/sys/dev/usb/uftdi.c
+++ b/sys/dev/usb/uftdi.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uftdi.c,v 1.7 2002/07/10 02:56:53 nate Exp $ 	*/
+/*	$OpenBSD: uftdi.c,v 1.8 2002/07/25 02:18:10 nate Exp $ 	*/
 /*	$NetBSD: uftdi.c,v 1.10 2002/05/08 18:10:19 scw Exp $	*/
 
 /*
@@ -128,7 +128,7 @@ USB_DECLARE_DRIVER(uftdi);
 USB_MATCH(uftdi)
 {
 	USB_MATCH_START(uftdi, uaa);
-	
+
 	if (uaa->iface != NULL)
 		return (UMATCH_NONE);
 
@@ -206,7 +206,7 @@ USB_ATTACH(uftdi)
 			       ": %s\n", devname, usbd_errstr(err));
 			goto bad;
 		}
-		
+
 		addr = ed->bEndpointAddress;
 		dir = UE_GET_DIR(ed->bEndpointAddress);
 		attr = ed->bmAttributes & UE_XFERTYPE;
@@ -229,7 +229,7 @@ USB_ATTACH(uftdi)
 		       USBDEVNAME(sc->sc_dev));
 		goto bad;
 	}
-	
+
 	uca.portno = FTDI_PIT_SIOA;
 	/* bulkin, bulkout set above */
 	uca.ibufsize = UFTDIIBUFSIZE;
@@ -546,7 +546,7 @@ uftdi_break(void *vsc, int portno, int onoff)
 	int data;
 
 	DPRINTF(("uftdi_break: sc=%p, port=%d onoff=%d\n", vsc, portno,
-		  onoff)); 
+		  onoff));
 
 	if (onoff) {
 		data = sc->last_lcr | FTDI_SIO_SET_BREAK;
diff --git a/sys/dev/usb/uftdireg.h b/sys/dev/usb/uftdireg.h
index 0cc61430cb3..7f3f8b74e34 100644
--- a/sys/dev/usb/uftdireg.h
+++ b/sys/dev/usb/uftdireg.h
@@ -1,11 +1,11 @@
-/*	$OpenBSD: uftdireg.h,v 1.6 2002/07/10 02:56:53 nate Exp $ 	*/
+/*	$OpenBSD: uftdireg.h,v 1.7 2002/07/25 02:18:10 nate Exp $ 	*/
 /*	$NetBSD: uftdireg.h,v 1.5 2002/05/08 18:10:19 scw Exp $ */
 
 /*
- * Definitions for the FTDI USB Single Port Serial Converter - 
- * known as FTDI_SIO (Serial Input/Output application of the chipset) 
+ * Definitions for the FTDI USB Single Port Serial Converter -
+ * known as FTDI_SIO (Serial Input/Output application of the chipset)
  *
- * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, 
+ * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
  * USB on the other.
  *
  * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
@@ -41,7 +41,7 @@ enum uftdi_type {
 /*
  * BmRequestType:  0100 0000B
  * bRequest:       FTDI_SIO_RESET
- * wValue:         Control Value 
+ * wValue:         Control Value
  *                   0 = Reset SIO
  *                   1 = Purge RX buffer
  *                   2 = Purge TX buffer
@@ -79,8 +79,8 @@ enum uftdi_type {
  */
 /* FTDI_SIO_SET_BAUDRATE */
 enum {
-	ftdi_sio_b300 = 0, 
-	ftdi_sio_b600 = 1, 
+	ftdi_sio_b300 = 0,
+	ftdi_sio_b600 = 1,
 	ftdi_sio_b1200 = 2,
 	ftdi_sio_b2400 = 3,
 	ftdi_sio_b4800 = 4,
@@ -108,7 +108,7 @@ enum {
 };
 
 /*
- * BmRequestType:  0100 0000B 
+ * BmRequestType:  0100 0000B
  * bRequest:       FTDI_SIO_SET_DATA
  * wValue:         Data characteristics (see below)
  * wIndex:         Port
@@ -144,7 +144,7 @@ enum {
 #define FTDI_SIO_SET_BREAK (0x1 << 14)
 
 
-/* 
+/*
  * BmRequestType:   0100 0000B
  * bRequest:        FTDI_SIO_MODEM_CTRL
  * wValue:          ControlValue (see below)
@@ -186,7 +186,7 @@ enum {
  *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
  *   wValue:         Xoff/Xon
  *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
- *   wLength:        0 
+ *   wLength:        0
  *   Data:           None
  *
  * hIndex protocol is:
@@ -204,15 +204,15 @@ enum {
  *
  * If Xon/Xoff handshaking is specified, the hValue field should contain the
  * XOFF character and the lValue field contains the XON character.
- */  
+ */
 /* FTDI_SIO_SET_FLOW_CTRL */
-#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 
+#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
 #define FTDI_SIO_RTS_CTS_HS 0x1
 #define FTDI_SIO_DTR_DSR_HS 0x2
 #define FTDI_SIO_XON_XOFF_HS 0x4
 
- 
-/* 
+
+/*
  *  BmRequestType:   0100 0000b
  *  bRequest:        FTDI_SIO_SET_EVENT_CHAR
  *  wValue:          Event Char
@@ -227,7 +227,7 @@ enum {
  *             1 = enabled
  *   B9..15  Reserved
  *
- * FTDI_SIO_SET_EVENT_CHAR 
+ * FTDI_SIO_SET_EVENT_CHAR
  *
  * Set the special event character for the specified communications port.
  * If the device sees this character it will immediately return the
@@ -236,8 +236,8 @@ enum {
  */
 
 
-          
-/* 
+
+/*
  *  BmRequestType:  0100 0000b
  *  bRequest:       FTDI_SIO_SET_ERROR_CHAR
  *  wValue:         Error Char
@@ -259,15 +259,15 @@ enum {
  */
 
 
-/* 
+/*
  *   BmRequestType:   1100 0000b
  *   bRequest:        FTDI_SIO_GET_MODEM_STATUS
  *   wValue:          zero
  *   wIndex:          Port
  *   wLength:         1
  *   Data:            Status
- * 
- * One byte of data is returned 
+ *
+ * One byte of data is returned
  * B0..3 0
  * B4    CTS
  *         0 = inactive
@@ -280,7 +280,7 @@ enum {
  *         1 = active
  * B7    Receive Line Signal Detect (RLSD)
  *         0 = inactive
- *         1 = active 
+ *         1 = active
  *
  * FTDI_SIO_GET_MODEM_STATUS
  * Retrieve the current value of the modem status register.
@@ -293,29 +293,29 @@ enum {
 
 
 /*
- *     
+ *
  * DATA FORMAT
- * 
+ *
  * IN Endpoint
- * 
+ *
  * The device reserves the first two bytes of data on this endpoint to contain
  * the current values of the modem and line status registers. In the absence of
  * data, the device generates a message consisting of these two status bytes
  * every 40 ms.
- * 
+ *
  * Byte 0: Modem Status
  *   NOTE: 4 upper bits have same layout as the MSR register in a 16550
- * 
+ *
  * Offset	Description
  * B0..3	Port
  * B4		Clear to Send (CTS)
  * B5		Data Set Ready (DSR)
  * B6		Ring Indicator (RI)
  * B7		Receive Line Signal Detect (RLSD)
- * 
+ *
  * Byte 1: Line Status
  *   NOTE: same layout as the LSR register in a 16550
- * 
+ *
  * Offset	Description
  * B0	Data Ready (DR)
  * B1	Overrun Error (OE)
@@ -328,17 +328,17 @@ enum {
  *
  *
  * OUT Endpoint
- * 
+ *
  * This device reserves the first bytes of data on this endpoint contain the
  * length and port identifier of the message. For the FTDI USB Serial converter
  * the port identifier is always 1.
- * 
+ *
  * Byte 0: Port & length
- * 
+ *
  * Offset	Description
  * B0..1	Port
  * B2..7	Length of message - (not including Byte 0)
- * 
+ *
  */
 #define FTDI_PORT_MASK 0x0f
 #define FTDI_MSR_MASK 0xf0
diff --git a/sys/dev/usb/ugen.c b/sys/dev/usb/ugen.c
index fffb0c2ee9b..2185251c785 100644
--- a/sys/dev/usb/ugen.c
+++ b/sys/dev/usb/ugen.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ugen.c,v 1.23 2002/07/10 21:41:50 mickey Exp $ */
+/*	$OpenBSD: ugen.c,v 1.24 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: ugen.c,v 1.58 2002/02/20 20:30:12 christos Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/ugen.c,v 1.26 1999/11/17 22:33:41 n_hibma Exp $	*/
 
@@ -191,7 +191,7 @@ USB_ATTACH(ugen)
 	char devinfo[1024];
 	usbd_status err;
 	int conf;
-	
+
 	usbd_devinfo(uaa->device, 0, devinfo);
 	USB_ATTACH_SETUP;
 	printf("%s: %s\n", USBDEVNAME(sc->sc_dev), devinfo);
@@ -464,7 +464,7 @@ ugenclose(dev_t dev, int flag, int mode, usb_proc_ptr p)
 			continue;
 		DPRINTFN(5, ("ugenclose: endpt=%d dir=%d sce=%p\n",
 			     endpt, dir, sce));
-		
+
 		usbd_abort_pipe(sce->pipeh);
 		usbd_close_pipe(sce->pipeh);
 		sce->pipeh = NULL;
@@ -628,7 +628,7 @@ ugen_do_read(struct ugen_softc *sc, int endpt, struct uio *uio, int flag)
 		splx(s);
 		break;
 
-		
+
 	default:
 		return (ENXIO);
 	}
@@ -825,7 +825,7 @@ ugenintr(usbd_xfer_handle xfer, usbd_private_handle addr, usbd_status status)
 		     ibuf[0], ibuf[1], ibuf[2]));
 
 	(void)b_to_q(ibuf, count, &sce->q);
-		
+
 	if (sce->state & UGEN_ASLP) {
 		sce->state &= ~UGEN_ASLP;
 		DPRINTFN(5, ("ugen_intr: waking %p\n", sce));
@@ -910,7 +910,7 @@ ugen_set_interface(struct ugen_softc *sc, int ifaceidx, int altno)
 		return (err);
 	if (ifaceidx < 0 || ifaceidx >= niface)
 		return (USBD_INVAL);
-	
+
 	err = usbd_device2interface_handle(sc->sc_udev, ifaceidx, &iface);
 	if (err)
 		return (err);
@@ -1034,7 +1034,7 @@ ugen_do_ioctl(struct ugen_softc *sc, int endpt, u_long cmd,
 		return (0);
 	case USB_SET_TIMEOUT:
 		sce = &sc->sc_endpoints[endpt][IN];
-		if (sce == NULL 
+		if (sce == NULL
 		    /* XXX this shouldn't happen, but the distinction between
 		       input and output pipes isn't clear enough.
 		       || sce->pipeh == NULL */
diff --git a/sys/dev/usb/uhcireg.h b/sys/dev/usb/uhcireg.h
index d51b7492396..fa47455002d 100644
--- a/sys/dev/usb/uhcireg.h
+++ b/sys/dev/usb/uhcireg.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uhcireg.h,v 1.11 2002/05/07 18:29:18 nate Exp $ */
+/*	$OpenBSD: uhcireg.h,v 1.12 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: uhcireg.h,v 1.14 2001/08/06 15:15:08 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/uhcireg.h,v 1.12 1999/11/17 22:33:42 n_hibma Exp $ */
 
@@ -85,7 +85,7 @@
 
 #define UHCI_FRNUM		0x06
 #define  UHCI_FRNUM_MASK	0x03ff
- 
+
 
 #define UHCI_FLBASEADDR		0x08
 
@@ -122,7 +122,7 @@ typedef u_int32_t uhci_physaddr_t;
 #define UHCI_PTR_QH		0x00000002
 #define UHCI_PTR_VF		0x00000004
 
-/* 
+/*
  * Wait this long after a QH has been removed.  This gives that HC a
  * chance to stop looking at it before it's recycled.
  */
diff --git a/sys/dev/usb/uhcivar.h b/sys/dev/usb/uhcivar.h
index acf3d7cd860..6ec5b6fd01b 100644
--- a/sys/dev/usb/uhcivar.h
+++ b/sys/dev/usb/uhcivar.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uhcivar.h,v 1.13 2002/05/07 18:29:18 nate Exp $ */
+/*	$OpenBSD: uhcivar.h,v 1.14 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: uhcivar.h,v 1.32 2000/08/13 16:18:09 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/uhcivar.h,v 1.14 1999/11/17 22:33:42 n_hibma Exp $	*/
 
@@ -42,8 +42,8 @@
 /*
  * To avoid having 1024 TDs for each isochronous transfer we introduce
  * a virtual frame list.  Every UHCI_VFRAMELIST_COUNT entries in the real
- * frame list points to a non-active TD.  These, in turn, form the 
- * starts of the virtual frame list.  This also has the advantage that it 
+ * frame list points to a non-active TD.  These, in turn, form the
+ * starts of the virtual frame list.  This also has the advantage that it
  * simplifies linking in/out of TDs/QHs in the schedule.
  * Furthermore, initially each of the inactive TDs point to an inactive
  * QH that forms the start of the interrupt traffic for that slot.
@@ -97,7 +97,7 @@ struct uhci_soft_td {
 	uhci_soft_td_qh_t link; 	/* soft version of the td_link field */
 	uhci_physaddr_t physaddr;	/* TD's physical address. */
 };
-/* 
+/*
  * Make the size such that it is a multiple of UHCI_TD_ALIGN.  This way
  * we can pack a number of soft TD together and have the real TD well
  * aligned.
diff --git a/sys/dev/usb/uhid.c b/sys/dev/usb/uhid.c
index 8131f4aa2f2..6dc30472289 100644
--- a/sys/dev/usb/uhid.c
+++ b/sys/dev/usb/uhid.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uhid.c,v 1.21 2002/07/11 03:11:17 nate Exp $ */
+/*	$OpenBSD: uhid.c,v 1.22 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: uhid.c,v 1.51 2002/03/17 18:02:53 augustss Exp $	*/
 
 /*
@@ -132,7 +132,7 @@ USB_ATTACH(uhid)
 	struct uhidev_attach_arg *uha = (struct uhidev_attach_arg *)uaa;
 	int size, repid;
 	void *desc;
-	
+
 	sc->sc_hdev.sc_intr = uhid_intr;
 	sc->sc_hdev.sc_parent = uha->parent;
 	sc->sc_hdev.sc_report_id = uha->reportid;
@@ -197,7 +197,7 @@ USB_DETACH(uhid)
 	vdevgone(maj, mn, mn, VCHR);
 
 #if 0
-	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, 
+	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH,
 			   sc->sc_hdev.sc_parent->sc_udev,
 			   USBDEV(sc->sc_hdev.sc_dev));
 #endif
@@ -213,7 +213,7 @@ uhid_intr(struct uhidev *addr, void *data, u_int len)
 #ifdef UHID_DEBUG
 	if (uhiddebug > 5) {
 		u_int32_t i;
-		
+
 		DPRINTF(("uhid_intr: data ="));
 		for (i = 0; i < len; i++)
 			DPRINTF((" %02x", ((u_char *)data)[i]));
@@ -222,7 +222,7 @@ uhid_intr(struct uhidev *addr, void *data, u_int len)
 #endif
 
 	(void)b_to_q(data, len, &sc->sc_q);
-		
+
 	if (sc->sc_state & UHID_ASLP) {
 		sc->sc_state &= ~UHID_ASLP;
 		DPRINTFN(5, ("uhid_intr: waking %p\n", &sc->sc_q));
@@ -361,7 +361,7 @@ uhid_do_write(struct uhid_softc *sc, struct uio *uio, int flag)
 	usbd_status err;
 
 	DPRINTFN(1, ("uhidwrite\n"));
-	
+
 	if (sc->sc_dying)
 		return (EIO);
 
diff --git a/sys/dev/usb/uhidev.c b/sys/dev/usb/uhidev.c
index c7af847f017..3a07d841d46 100644
--- a/sys/dev/usb/uhidev.c
+++ b/sys/dev/usb/uhidev.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uhidev.c,v 1.3 2002/05/09 15:06:29 nate Exp $	*/
+/*	$OpenBSD: uhidev.c,v 1.4 2002/07/25 02:18:10 nate Exp $	*/
 /*	$NetBSD: uhidev.c,v 1.5 2002/02/27 01:30:50 augustss Exp $	*/
 
 /*
@@ -90,7 +90,7 @@ USB_MATCH(uhidev)
 {
 	USB_MATCH_START(uhidev, uaa);
 	usb_interface_descriptor_t *id;
-	
+
 	if (uaa->iface == NULL)
 		return (UMATCH_NONE);
 	id = usbd_get_interface_descriptor(uaa->iface);
@@ -116,7 +116,7 @@ USB_ATTACH(uhidev)
 	void *desc;
 	usbd_status err;
 	char devinfo[1024];
-	
+
 	sc->sc_udev = uaa->device;
 	sc->sc_iface = iface;
 	id = usbd_get_interface_descriptor(iface);
@@ -145,7 +145,7 @@ USB_ATTACH(uhidev)
 	DPRINTFN(10,("uhidev_attach: bLength=%d bDescriptorType=%d "
 		     "bEndpointAddress=%d-%s bmAttributes=%d wMaxPacketSize=%d"
 		     " bInterval=%d\n",
-		     ed->bLength, ed->bDescriptorType, 
+		     ed->bLength, ed->bDescriptorType,
 		     ed->bEndpointAddress & UE_ADDR,
 		     UE_GET_DIR(ed->bEndpointAddress)==UE_DIR_IN? "in" : "out",
 		     ed->bmAttributes & UE_XFERTYPE,
@@ -182,7 +182,7 @@ USB_ATTACH(uhidev)
 		sc->sc_dying = 1;
 		USB_ATTACH_ERROR_RETURN;
 	}
-	
+
 	sc->sc_repdesc = desc;
 	sc->sc_repdesc_size = size;
 
@@ -362,7 +362,7 @@ uhidev_intr(usbd_xfer_handle xfer, usbd_private_handle addr, usbd_status status)
 #ifdef UHIDEV_DEBUG
 	if (uhidevdebug > 5) {
 		u_int32_t i;
-		
+
 		DPRINTF(("uhidev_intr: status=%d cc=%d\n", status, cc));
 		DPRINTF(("uhidev_intr: data ="));
 		for (i = 0; i < cc; i++)
@@ -433,8 +433,8 @@ uhidev_open(struct uhidev *scd)
 	/* Set up interrupt pipe. */
 	DPRINTF(("uhidev_open: isize=%d, ep=0x%02x\n", sc->sc_isize,
 		 sc->sc_ep_addr));
-	err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_ep_addr, 
-		  USBD_SHORT_XFER_OK, &sc->sc_intrpipe, sc, sc->sc_ibuf, 
+	err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_ep_addr,
+		  USBD_SHORT_XFER_OK, &sc->sc_intrpipe, sc, sc->sc_ibuf,
 		  sc->sc_isize, uhidev_intr, USBD_DEFAULT_INTERVAL);
 	if (err) {
 		DPRINTF(("uhidopen: usbd_open_pipe_intr failed, "
@@ -485,7 +485,7 @@ uhidev_set_report(struct uhidev *scd, int type, void *data, int len)
 		data = buf;
 	}
 
-	return usbd_set_report(scd->sc_parent->sc_iface, type, 
+	return usbd_set_report(scd->sc_parent->sc_iface, type,
 			       scd->sc_report_id, data, len);
 }
 
@@ -501,13 +501,13 @@ uhidev_set_report_async(struct uhidev *scd, int type, void *data, int len)
 		data = buf;
 	}
 
-	usbd_set_report_async(scd->sc_parent->sc_iface, type, 
+	usbd_set_report_async(scd->sc_parent->sc_iface, type,
 			      scd->sc_report_id, data, len);
 }
 
 usbd_status
 uhidev_get_report(struct uhidev *scd, int type, void *data, int len)
 {
-	return usbd_get_report(scd->sc_parent->sc_iface, type, 
+	return usbd_get_report(scd->sc_parent->sc_iface, type,
 			       scd->sc_report_id, data, len);
 }
diff --git a/sys/dev/usb/uhub.c b/sys/dev/usb/uhub.c
index c8422aa8a50..2e1fa1b445f 100644
--- a/sys/dev/usb/uhub.c
+++ b/sys/dev/usb/uhub.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uhub.c,v 1.17 2002/07/10 13:15:58 nate Exp $ */
+/*	$OpenBSD: uhub.c,v 1.18 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: uhub.c,v 1.52 2001/10/26 17:53:59 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/uhub.c,v 1.18 1999/11/17 22:33:43 n_hibma Exp $	*/
 
@@ -90,7 +90,7 @@ Static bus_child_detached_t uhub_child_detached;
 #endif
 
 
-/* 
+/*
  * We need two attachment points:
  * hub to usb and hub to hub
  * Every other driver only connects to hubs
@@ -107,7 +107,7 @@ struct cfattach uhub_uhub_ca = {
 #elif defined(__FreeBSD__)
 USB_DECLARE_DRIVER_INIT(uhub,
 			DEVMETHOD(bus_child_detached, uhub_child_detached));
-			
+
 /* Create the driver instance for the hub connected to usb case. */
 devclass_t uhubroot_devclass;
 
@@ -130,9 +130,9 @@ USB_MATCH(uhub)
 {
 	USB_MATCH_START(uhub, uaa);
 	usb_device_descriptor_t *dd = usbd_get_device_descriptor(uaa->device);
-	
+
 	DPRINTFN(5,("uhub_match, dd=%p\n", dd));
-	/* 
+	/*
 	 * The subclass for hubs seems to be 0 for some and 1 for others,
 	 * so we just ignore the subclass.
 	 */
@@ -153,7 +153,7 @@ USB_ATTACH(uhub)
 	int p, port, nports, nremov, pwrdly;
 	usbd_interface_handle iface;
 	usb_endpoint_descriptor_t *ed;
-	
+
 	DPRINTFN(1,("uhub_attach\n"));
 	sc->sc_hub = dev;
 	usbd_devinfo(dev, 1, devinfo);
@@ -207,11 +207,11 @@ USB_ATTACH(uhub)
 	dev->hub->hubsoftc = sc;
 	hub->explore = uhub_explore;
 	hub->hubdesc = hubdesc;
-	
+
 	DPRINTFN(1,("usbhub_init_hub: selfpowered=%d, parent=%p, "
 		    "parent->selfpowered=%d\n",
 		 dev->self_powered, dev->powersrc->parent,
-		 dev->powersrc->parent ? 
+		 dev->powersrc->parent ?
 		 dev->powersrc->parent->self_powered : 0));
 
 	if (!dev->self_powered && dev->powersrc->parent != NULL &&
@@ -238,10 +238,10 @@ USB_ATTACH(uhub)
 	}
 
 	err = usbd_open_pipe_intr(iface, ed->bEndpointAddress,
-		  USBD_SHORT_XFER_OK, &sc->sc_ipipe, sc, sc->sc_status, 
+		  USBD_SHORT_XFER_OK, &sc->sc_ipipe, sc, sc->sc_status,
 		  sizeof(sc->sc_status), uhub_intr, UHUB_INTR_INTERVAL);
 	if (err) {
-		printf("%s: cannot open interrupt pipe\n", 
+		printf("%s: cannot open interrupt pipe\n",
 		       USBDEVNAME(sc->sc_dev));
 		goto bad;
 	}
@@ -297,7 +297,7 @@ USB_ATTACH(uhub)
 		/* Turn the power on. */
 		err = usbd_set_port_feature(dev, port, UHF_PORT_POWER);
 		if (err)
-			printf("%s: port %d power on failed, %s\n", 
+			printf("%s: port %d power on failed, %s\n",
 			       USBDEVNAME(sc->sc_dev), port,
 			       usbd_errstr(err));
 		DPRINTF(("usb_init_port: turn on port %d power\n", port));
@@ -376,7 +376,7 @@ uhub_explore(usbd_device_handle dev)
 			if (up->device != NULL && up->device->hub != NULL)
 				up->device->hub->explore(up->device);
 #if 0 && defined(DIAGNOSTIC)
-			if (up->device == NULL && 
+			if (up->device == NULL &&
 			    (status & UPS_CURRENT_CONNECT_STATUS))
 				printf("%s: connected, no device\n",
 				       USBDEVNAME(sc->sc_dev));
@@ -403,7 +403,7 @@ uhub_explore(usbd_device_handle dev)
 			DPRINTF(("uhub_explore: device addr=%d disappeared "
 				 "on port %d\n", up->device->address, port));
 			usb_disconnect_port(up, USBDEV(sc->sc_dev));
-			usbd_clear_port_feature(dev, port, 
+			usbd_clear_port_feature(dev, port,
 						UHF_C_PORT_CONNECTION);
 		}
 		if (!(status & UPS_CURRENT_CONNECT_STATUS)) {
@@ -447,8 +447,8 @@ uhub_explore(usbd_device_handle dev)
 		}
 
 		/* Get device info and set its address. */
-		err = usbd_new_device(USBDEV(sc->sc_dev), dev->bus, 
-			  dev->depth + 1, status & UPS_LOW_SPEED, 
+		err = usbd_new_device(USBDEV(sc->sc_dev), dev->bus,
+			  dev->depth + 1, status & UPS_LOW_SPEED,
 			  port, up);
 		/* XXX retry a few times? */
 		if (err) {
@@ -457,7 +457,7 @@ uhub_explore(usbd_device_handle dev)
 			/* Avoid addressing problems by disabling. */
 			/* usbd_reset_port(dev, port, &up->status); */
 
-			/* 
+			/*
 			 * The unit refused to accept a new address, or had
 			 * some other serious problem.  Since we cannot leave
 			 * at 0 we have to disable the port instead.
@@ -536,7 +536,7 @@ USB_DETACH(uhub)
 		if (rup->device)
 			usb_disconnect_port(rup, self);
 	}
-	
+
 	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_hub,
 			   USBDEV(sc->sc_dev));
 
@@ -558,7 +558,7 @@ uhub_child_detached(device_t self, device_t child)
        int port;
        int i;
 
-       if (!devhub->hub)  
+       if (!devhub->hub)
                /* should never happen; children are only created after init */
                panic("hub not fully initialised, but child deleted?");
 
diff --git a/sys/dev/usb/ukbd.c b/sys/dev/usb/ukbd.c
index b47f426c2cf..dd2fdc53047 100644
--- a/sys/dev/usb/ukbd.c
+++ b/sys/dev/usb/ukbd.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ukbd.c,v 1.15 2002/05/11 08:15:24 deraadt Exp $	*/
+/*	$OpenBSD: ukbd.c,v 1.16 2002/07/25 02:18:10 nate Exp $	*/
 /*      $NetBSD: ukbd.c,v 1.79 2001/12/30 19:37:43 augustss Exp $        */
 
 /*
@@ -103,7 +103,7 @@ struct ukbd_data {
 
 #if defined(WSDISPLAY_COMPAT_RAWKBD)
 #define NN 0			/* no translation */
-/* 
+/*
  * Translate USB keycodes to US keyboard XT scancodes.
  * Scancodes >= 0x80 represent EXTENDED keycodes.
  *
@@ -211,7 +211,7 @@ ukbdtracedump(void)
 {
 	int i;
 	for (i = 0; i < UKBDTRACESIZE; i++) {
-		struct ukbdtraceinfo *p = 
+		struct ukbdtraceinfo *p =
 		    &ukbdtracedata[(i+ukbdtraceindex)%UKBDTRACESIZE];
 		printf("%lu.%06lu: mod=0x%02x key0=0x%02x key1=0x%02x "
 		       "key2=0x%02x key3=0x%02x\n",
@@ -275,7 +275,7 @@ USB_MATCH(ukbd)
 	struct uhidev_attach_arg *uha = (struct uhidev_attach_arg *)uaa;
 	int size;
 	void *desc;
-	
+
 	uhidev_get_report_desc(uha->parent, &desc, &size);
 	if (!hid_is_collection(desc, size, uha->reportid,
 			       HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_KEYBOARD)))
@@ -291,7 +291,7 @@ USB_ATTACH(ukbd)
 	u_int32_t qflags;
 	const char *parseerr;
 	struct wskbddev_attach_args a;
-	
+
 	sc->sc_hdev.sc_intr = ukbd_intr;
 	sc->sc_hdev.sc_parent = uha->parent;
 	sc->sc_hdev.sc_report_id = uha->reportid;
@@ -302,7 +302,7 @@ USB_ATTACH(ukbd)
 		       sc->sc_hdev.sc_dev.dv_xname, parseerr);
 		USB_ATTACH_ERROR_RETURN;
 	}
-		
+
 #ifdef DIAGNOSTIC
 	printf(": %d modifier keys, %d key codes", sc->sc_nmod,
 	       sc->sc_nkeycode);
@@ -361,7 +361,7 @@ ukbd_enable(void *v, int on)
 	/* Should only be called to change state */
 	if (sc->sc_enabled == on) {
 #ifdef UKBD_DEBUG
-		printf("ukbd_enable: %s: bad call on=%d\n", 
+		printf("ukbd_enable: %s: bad call on=%d\n",
 		       USBDEVNAME(sc->sc_hdev.sc_dev), on);
 #endif
 		return (EBUSY);
@@ -507,7 +507,7 @@ ukbd_decode(struct ukbd_softc *sc, struct ukbd_data *ud)
 #define ADDKEY(c) ibuf[nkeys++] = (c)
 
 #ifdef UKBD_DEBUG
-	/* 
+	/*
 	 * Keep a trace of the last events.  Using printf changes the
 	 * timing, so this can be useful sometimes.
 	 */
@@ -539,10 +539,10 @@ ukbd_decode(struct ukbd_softc *sc, struct ukbd_data *ud)
 	omod = sc->sc_odata.modifiers;
 	if (mod != omod)
 		for (i = 0; i < sc->sc_nmod; i++)
-			if (( mod & sc->sc_mods[i].mask) != 
+			if (( mod & sc->sc_mods[i].mask) !=
 			    (omod & sc->sc_mods[i].mask))
-				ADDKEY(sc->sc_mods[i].key | 
-				       (mod & sc->sc_mods[i].mask 
+				ADDKEY(sc->sc_mods[i].key |
+				       (mod & sc->sc_mods[i].mask
 					  ? PRESS : RELEASE));
 	if (memcmp(ud->keycode, sc->sc_odata.keycode, sc->sc_nkeycode) != 0) {
 		/* Check for released keys. */
@@ -558,7 +558,7 @@ ukbd_decode(struct ukbd_softc *sc, struct ukbd_data *ud)
 		rfound:
 			;
 		}
-		
+
 		/* Check for pressed keys. */
 		for (i = 0; i < sc->sc_nkeycode; i++) {
 			key = ud->keycode[i];
@@ -606,7 +606,7 @@ ukbd_decode(struct ukbd_softc *sc, struct ukbd_data *ud)
 					sc->sc_rep[npress++] = 0xe0;
 				sc->sc_rep[npress++] = c & 0x7f;
 			}
-			DPRINTFN(1,("ukbd_intr: raw = %s0x%02x\n", 
+			DPRINTFN(1,("ukbd_intr: raw = %s0x%02x\n",
 				    c & 0x80 ? "0xe0 " : "",
 				    cbuf[j]));
 			j++;
@@ -627,7 +627,7 @@ ukbd_decode(struct ukbd_softc *sc, struct ukbd_data *ud)
 	s = spltty();
 	for (i = 0; i < nkeys; i++) {
 		key = ibuf[i];
-		wskbd_input(sc->sc_wskbddev, 
+		wskbd_input(sc->sc_wskbddev,
 		    key&RELEASE ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN,
 		    key&CODEMASK);
 	}
@@ -736,7 +736,7 @@ ukbd_cngetc(void *v, u_int *type, int *data)
 	sc->sc_polling = 0;
 	c = sc->sc_pollchars[0];
 	sc->sc_npollchar--;
-	memcpy(sc->sc_pollchars, sc->sc_pollchars+1, 
+	memcpy(sc->sc_pollchars, sc->sc_pollchars+1,
 	       sc->sc_npollchar * sizeof(u_int16_t));
 	*type = c & RELEASE ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN;
 	*data = c & CODEMASK;
diff --git a/sys/dev/usb/ukbdmap.c b/sys/dev/usb/ukbdmap.c
index b5f4bb01d69..ada175f0823 100644
--- a/sys/dev/usb/ukbdmap.c
+++ b/sys/dev/usb/ukbdmap.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ukbdmap.c,v 1.11 2002/05/07 18:29:18 nate Exp $ */
+/*	$OpenBSD: ukbdmap.c,v 1.12 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: ukbdmap.c,v 1.6 2001/04/04 05:31:57 toshii Exp $	*/
 
 /*
@@ -117,7 +117,7 @@ Static const keysym_t ukbd_keydesc_us[] = {
     KC(70),			KS_Print_Screen,
     KC(71), 			KS_Hold_Screen,
     KC(72),			KS_Pause,
-    KC(73),			KS_Insert, 
+    KC(73),			KS_Insert,
     KC(74),			KS_Home,
     KC(75), KS_Cmd_ScrollBack,	KS_Prior,
     KC(76),			KS_Delete,
@@ -304,7 +304,7 @@ Static const keysym_t ukbd_keydesc_fr[] = {
     KC(39),  KS_agrave,		KS_0,		KS_at,
     KC(45),  KS_parenright,	KS_degree,	KS_bracketright,
     KC(46),  KS_equal,		KS_plus,	KS_braceright,
-    KC(47),  KS_dead_circumflex, KS_dead_diaeresis, 
+    KC(47),  KS_dead_circumflex, KS_dead_diaeresis,
     KC(48),  KS_dollar,		KS_sterling,	KS_currency,
     KC(50),  KS_asterisk,	KS_mu,
     KC(51),  KS_m,
diff --git a/sys/dev/usb/ulpt.c b/sys/dev/usb/ulpt.c
index f2fa020887c..9bef174e627 100644
--- a/sys/dev/usb/ulpt.c
+++ b/sys/dev/usb/ulpt.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ulpt.c,v 1.11 2002/07/10 21:41:51 mickey Exp $ */
+/*	$OpenBSD: ulpt.c,v 1.12 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: ulpt.c,v 1.49 2002/02/25 22:39:01 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/ulpt.c,v 1.24 1999/11/17 22:33:44 n_hibma Exp $	*/
 
@@ -175,7 +175,7 @@ USB_MATCH(ulpt)
 {
 	USB_MATCH_START(ulpt, uaa);
 	usb_interface_descriptor_t *id;
-	
+
 	DPRINTFN(10,("ulpt_match\n"));
 	if (uaa->iface == NULL)
 		return (UMATCH_NONE);
@@ -203,14 +203,14 @@ USB_ATTACH(ulpt)
 	usb_endpoint_descriptor_t *ed;
 	u_int8_t epcount;
 	int i, altno;
-	
+
 	DPRINTFN(10,("ulpt_attach: sc=%p\n", sc));
 	usbd_devinfo(dev, 0, devinfo);
 	USB_ATTACH_SETUP;
 	printf("%s: %s, iclass %d/%d\n", USBDEVNAME(sc->sc_dev),
 	       devinfo, ifcd->bInterfaceClass, ifcd->bInterfaceSubClass);
 
-	/* XXX 
+	/* XXX
 	 * Stepping through the alternate settings needs to be abstracted out.
 	 */
 	cdesc = usbd_get_config_descriptor(dev);
@@ -666,7 +666,7 @@ ulpt_do_write(struct ulpt_softc *sc, struct uio *uio, int flags)
 		if (error)
 			break;
 		DPRINTFN(1, ("ulptwrite: transfer %d bytes\n", n));
-		err = usbd_bulk_transfer(xfer, sc->sc_out_pipe, USBD_NO_COPY, 
+		err = usbd_bulk_transfer(xfer, sc->sc_out_pipe, USBD_NO_COPY,
 			  USBD_NO_TIMEOUT, bufp, &n, "ulptwr");
 		if (err) {
 			DPRINTF(("ulptwrite: error=%d\n", err));
diff --git a/sys/dev/usb/umass.c b/sys/dev/usb/umass.c
index b94f5363034..ad9d539ab9f 100644
--- a/sys/dev/usb/umass.c
+++ b/sys/dev/usb/umass.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: umass.c,v 1.17 2002/06/21 00:34:34 art Exp $ */
+/*	$OpenBSD: umass.c,v 1.18 2002/07/25 02:18:10 nate Exp $ */
 /*	$NetBSD: umass.c,v 1.49 2001/01/21 18:56:38 augustss Exp $	*/
 /*-
  * Copyright (c) 1999 MAEKAWA Masahide <bishop@rr.iij4u.or.jp>,
@@ -237,7 +237,7 @@ int umassdebug = 0;
 #define UMASS_SCSIID_HOST	UMASS_SCSIID_MAX
 #endif
 
-#define MS_TO_TICKS(ms) ((ms) * hz / 1000)			      
+#define MS_TO_TICKS(ms) ((ms) * hz / 1000)
 
 
 /* Bulk-Only features */
@@ -311,7 +311,7 @@ typedef void (*transfer_cb_f)(struct umass_softc *sc, void *priv,
 
 typedef void (*wire_reset_f)(struct umass_softc *sc, int status);
 typedef void (*wire_transfer_f)(struct umass_softc *sc, int lun,
-				void *cmd, int cmdlen, void *data, int datalen, 
+				void *cmd, int cmdlen, void *data, int datalen,
 				int dir, transfer_cb_f cb, void *priv);
 typedef void (*wire_state_f)(usbd_xfer_handle xfer,
 				usbd_private_handle priv, usbd_status err);
@@ -400,12 +400,12 @@ struct umass_softc {
 	 */
 	command_transform_f	transform;	/* command transform */
 #endif
-	
+
 	/* Bulk specific variables for transfers in progress */
 	umass_bbb_cbw_t		cbw;	/* command block wrapper */
 	umass_bbb_csw_t		csw;	/* command status wrapper*/
 	/* CBI specific variables for transfers in progress */
-	umass_cbi_cbl_t		cbl;	/* command block */ 
+	umass_cbi_cbl_t		cbl;	/* command block */
 	umass_cbi_sbl_t		sbl;	/* status block */
 
 	/* generic variables for transfers in progress */
@@ -427,7 +427,7 @@ struct umass_softc {
 #	define XFER_BBB_RESET1		6
 #	define XFER_BBB_RESET2		7
 #	define XFER_BBB_RESET3		8
-	
+
 #	define XFER_CBI_CB		0	/* CBI */
 #	define XFER_CBI_DATA		1
 #	define XFER_CBI_STATUS		2
@@ -446,7 +446,7 @@ struct umass_softc {
 	int			transfer_dir;		/* data direction */
 	void			*transfer_data;		/* data buffer */
 	int			transfer_datalen;	/* (maximum) length */
-	int			transfer_actlen;	/* actual length */ 
+	int			transfer_actlen;	/* actual length */
 	transfer_cb_f		transfer_cb;		/* callback */
 	void			*transfer_priv;		/* for callback */
 	int			transfer_status;
@@ -558,7 +558,7 @@ Static usbd_status umass_setup_transfer(struct umass_softc *sc,
 Static usbd_status umass_setup_ctrl_transfer(struct umass_softc *sc,
 				usbd_device_handle dev,
 				usb_device_request_t *req,
-				void *buffer, int buflen, int flags, 
+				void *buffer, int buflen, int flags,
 				usbd_xfer_handle xfer);
 Static void umass_clear_endpoint_stall(struct umass_softc *sc,
 				u_int8_t endpt, usbd_pipe_handle pipe,
@@ -786,7 +786,7 @@ umass_match_proto(sc, iface, dev)
 		return (UMATCH_NONE);
 
 	if (vendor == USB_VENDOR_SONY && id->bInterfaceSubClass == 0xff) {
-		/* 
+		/*
 		 * Sony DSC devices set the sub class to 0xff
 		 * instead of 1 (RBC). Fix that here.
 		 */
@@ -801,7 +801,7 @@ umass_match_proto(sc, iface, dev)
 
 	sc->subclass = id->bInterfaceSubClass;
 	sc->protocol = id->bInterfaceProtocol;
-	
+
 	switch (sc->subclass) {
 	case UISUBCLASS_SCSI:
 		sc->proto |= PROTO_SCSI;
@@ -954,7 +954,7 @@ USB_ATTACH(umass)
 		sProto = "unknown";
 		break;
 	}
-	printf("%s: using %s over %s\n", USBDEVNAME(sc->sc_dev), sSubclass, 
+	printf("%s: using %s over %s\n", USBDEVNAME(sc->sc_dev), sSubclass,
 	       sProto);
 
 	if (sc->drive == INSYSTEM_USBCABLE) {
@@ -1047,7 +1047,7 @@ USB_ATTACH(umass)
 		umass_disco(sc);
 		USB_ATTACH_ERROR_RETURN;
 	}
-	/* 
+	/*
 	 * Open the intr-in pipe if the protocol is CBI with CCI.
 	 * Note: early versions of the Zip drive do have an interrupt pipe, but
 	 * this pipe is unused
@@ -1094,7 +1094,7 @@ USB_ATTACH(umass)
 	case PROTO_CBI_I:
 		bno = XFER_CBI_DATA;
 	dalloc:
-		sc->data_buffer = usbd_alloc_buffer(sc->transfer_xfer[bno], 
+		sc->data_buffer = usbd_alloc_buffer(sc->transfer_xfer[bno],
 						    UMASS_MAX_TRANSFER_SIZE);
 		if (sc->data_buffer == NULL) {
 			umass_disco(sc);
@@ -1129,7 +1129,7 @@ USB_ATTACH(umass)
 	 */
 	sc->sc_adapter.scsipi_cmd = umass_scsipi_cmd;
 	sc->sc_adapter.scsipi_minphys = umass_scsipi_minphys;
-	
+
 	/*
 	 * fill in the prototype scsipi_link.
 	 */
@@ -1144,7 +1144,7 @@ USB_ATTACH(umass)
 			sc->u.sc_link.flags &= ~SDEV_ATAPI;
 
 		sc->u.sc_link.adapter_buswidth = 2;
-		sc->u.sc_link.adapter_target = UMASS_SCSIID_HOST; 
+		sc->u.sc_link.adapter_target = UMASS_SCSIID_HOST;
 		sc->u.sc_link.luns = sc->maxlun + 1;
 
 		sc->u.sc_link.adapter_softc = sc;
@@ -1158,7 +1158,7 @@ USB_ATTACH(umass)
 
 
 	default:
-		printf("%s: proto=0x%x not supported yet\n", 
+		printf("%s: proto=0x%x not supported yet\n",
 		       USBDEVNAME(sc->sc_dev), sc->proto);
 		umass_disco(sc);
 		USB_ATTACH_ERROR_RETURN;
@@ -1289,7 +1289,7 @@ umass_activate(self, act)
 Static void
 umass_disco(sc)
 	struct umass_softc *sc;
-{ 
+{
 	int i;
 
 	DPRINTF(UDMASS_GEN, ("umass_disco\n"));
@@ -1458,7 +1458,7 @@ umass_bbb_reset(struct umass_softc *sc, int status)
 
 	DPRINTF(UDMASS_BBB, ("%s: Bulk Reset\n",
 		USBDEVNAME(sc->sc_dev)));
-	
+
 	sc->transfer_state = TSTATE_BBB_RESET1;
 	sc->transfer_status = status;
 
@@ -1496,7 +1496,7 @@ umass_bbb_transfer(struct umass_softc *sc, int lun, void *cmd, int cmdlen,
 	 * is stored in the buffer pointed to by data.
 	 *
 	 * umass_bbb_transfer initialises the transfer and lets the state
-	 * machine in umass_bbb_state handle the completion. It uses the 
+	 * machine in umass_bbb_state handle the completion. It uses the
 	 * following states:
 	 * TSTATE_BBB_COMMAND
 	 *   -> TSTATE_BBB_DATA
@@ -1638,7 +1638,7 @@ umass_bbb_state(usbd_xfer_handle xfer, usbd_private_handle priv,
 
 			return;
 		} else if (sc->transfer_dir == DIR_OUT) {
-			memcpy(sc->data_buffer, sc->transfer_data, 
+			memcpy(sc->data_buffer, sc->transfer_data,
 			       sc->transfer_datalen);
 			if (umass_setup_transfer(sc, sc->bulkout_pipe,
 					sc->data_buffer, sc->transfer_datalen,
@@ -1712,7 +1712,7 @@ umass_bbb_state(usbd_xfer_handle xfer, usbd_private_handle priv,
 			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
 			return;
 		}
-	
+
 		/* Status transport phase, setup transfer */
 		if (sc->transfer_state == TSTATE_BBB_COMMAND ||
 		    sc->transfer_state == TSTATE_BBB_DATA ||
@@ -1798,7 +1798,7 @@ umass_bbb_state(usbd_xfer_handle xfer, usbd_private_handle priv,
 			printf("%s: Phase Error, residue = %d\n",
 				USBDEVNAME(sc->sc_dev),
 				UGETDW(sc->csw.dCSWDataResidue));
-				
+
 			umass_bbb_reset(sc, STATUS_WIRE_FAILED);
 			return;
 
@@ -1807,7 +1807,7 @@ umass_bbb_state(usbd_xfer_handle xfer, usbd_private_handle priv,
 			panic("%s: transferred %d bytes instead of %d bytes\n",
 				USBDEVNAME(sc->sc_dev),
 				sc->transfer_actlen, sc->transfer_datalen);
-		} 
+		}
 #if 0
 		else if (sc->transfer_datalen - sc->transfer_actlen
 			   != UGETDW(sc->csw.dCSWDataResidue)) {
@@ -1926,7 +1926,7 @@ umass_cbi_reset(struct umass_softc *sc, int status)
 
 	/*
 	 * Command Block Reset Protocol
-	 * 
+	 *
 	 * First send a reset request to the device. Then clear
 	 * any possibly stalled bulk endpoints.
 
@@ -1940,7 +1940,7 @@ umass_cbi_reset(struct umass_softc *sc, int status)
 
 	DPRINTF(UDMASS_CBI, ("%s: CBI Reset\n",
 		USBDEVNAME(sc->sc_dev)));
-	
+
 	KASSERT(sizeof(sc->cbl) >= SEND_DIAGNOSTIC_CMDLEN,
 		("%s: CBL struct is too small (%d < %d)\n",
 			USBDEVNAME(sc->sc_dev),
@@ -1986,7 +1986,7 @@ umass_cbi_transfer(struct umass_softc *sc, int lun,
 	 * is stored in the buffer pointed to by data.
 	 *
 	 * umass_cbi_transfer initialises the transfer and lets the state
-	 * machine in umass_cbi_state handle the completion. It uses the 
+	 * machine in umass_cbi_state handle the completion. It uses the
 	 * following states:
 	 * TSTATE_CBI_COMMAND
 	 *   -> XXX fill in
@@ -2068,7 +2068,7 @@ umass_cbi_state(usbd_xfer_handle xfer, usbd_private_handle priv,
 
 			return;
 		}
-		
+
 		sc->transfer_state = TSTATE_CBI_DATA;
 		if (sc->transfer_dir == DIR_IN) {
 			if (umass_setup_transfer(sc, sc->bulkin_pipe,
@@ -2078,7 +2078,7 @@ umass_cbi_state(usbd_xfer_handle xfer, usbd_private_handle priv,
 				umass_cbi_reset(sc, STATUS_WIRE_FAILED);
 
 		} else if (sc->transfer_dir == DIR_OUT) {
-			memcpy(sc->data_buffer, sc->transfer_data, 
+			memcpy(sc->data_buffer, sc->transfer_data,
 			       sc->transfer_datalen);
 			if (umass_setup_transfer(sc, sc->bulkout_pipe,
 					sc->transfer_data, sc->transfer_datalen,
@@ -2182,7 +2182,7 @@ umass_cbi_state(usbd_xfer_handle xfer, usbd_private_handle priv,
 
 		if (sc->proto & PROTO_UFI) {
 			int status;
-			
+
 			/* Section 3.4.3.1.3 specifies that the UFI command
 			 * protocol returns an ASC and ASCQ in the interrupt
 			 * data block.
@@ -2470,7 +2470,7 @@ umass_cam_attach(struct umass_softc *sc)
 			UMASS_SCSIID_MAX, __FILE__);
 		return(1);
 	}
-		
+
 #ifdef UMASS_DO_CAM_RESCAN
 	if (!cold) {
 		/* Notify CAM of the new device. Any failure is benign, as the
@@ -2713,7 +2713,7 @@ umass_cam_action(struct cam_sim *sim, union ccb *ccb)
 		ccb->ccb_h.status = CAM_REQ_INPROG;
 		umass_reset(sc, umass_cam_cb, (void *) ccb);
 		break;
-	} 
+	}
 	case XPT_GET_TRAN_SETTINGS:
 	{
 		struct ccb_trans_settings *cts = &ccb->cts;
@@ -2861,7 +2861,7 @@ umass_cam_cb(struct umass_softc *sc, void *priv, int residue, int status)
 			} else {
 #ifdef UMASS_DEBUG
 				panic("transform(REQUEST_SENSE) failed\n");
-#else 
+#else
 				csio->resid = sc->transfer_datalen;
 				ccb->ccb_h.status = CAM_REQ_CMP_ERR;
 				xpt_done(ccb);
@@ -3154,7 +3154,7 @@ umass_scsipi_cmd(xs)
 	DPRINTF(UDMASS_CMD, ("%s: umass_scsi_cmd:  %d:%d xs=%p cmd=0x%02x "
 	    "(quirks=0x%x, poll=%d)\n", USBDEVNAME(sc->sc_dev),
 	    SCSI_LINK_TARGET(sc_link), SCSI_LINK_LUN(sc_link),
-	    xs, xs->cmd->opcode, sc_link->quirks, 
+	    xs, xs->cmd->opcode, sc_link->quirks,
 	    xs->xs_control & XS_CTL_POLL));
 #endif
 
@@ -3172,8 +3172,8 @@ umass_scsipi_cmd(xs)
 
 #ifdef UMASS_DEBUG
 #if defined(__NetBSD__)
-	if ((sc_link->type == BUS_ATAPI ? 
-	     sc_link->scsipi_atapi.drive : SCSI_LINK_TARGET(sc_link)) 
+	if ((sc_link->type == BUS_ATAPI ?
+	     sc_link->scsipi_atapi.drive : SCSI_LINK_TARGET(sc_link))
 	    != UMASS_SCSIID_DEVICE) {
 		DPRINTF(UDMASS_SCSI, ("%s: wrong SCSI ID %d\n",
 		    USBDEVNAME(sc->sc_dev),
@@ -3257,7 +3257,7 @@ umass_scsipi_cmd(xs)
 		sc->transfer(sc, SCSI_LINK_LUN(sc_link), cmd, cmdlen,
 			     xs->data, xs->datalen, dir, 0, xs);
 		sc->sc_xfer_flags = 0;
-		DPRINTF(UDMASS_SCSI, ("umass_scsi_cmd: done err=%d\n", 
+		DPRINTF(UDMASS_SCSI, ("umass_scsi_cmd: done err=%d\n",
 				      sc->sc_sync_status));
 		switch (sc->sc_sync_status) {
 		case USBD_NORMAL_COMPLETION:
@@ -3288,7 +3288,7 @@ umass_scsipi_cmd(xs)
 #if defined(__OpenBSD__)
 	xs->flags |= ITSDONE;
 #endif
-	
+
 	scsipi_done(xs);
 	if (xs->xs_control & XS_CTL_POLL)
 		return (COMPLETE);
@@ -3340,7 +3340,7 @@ umass_scsipi_cb(struct umass_softc *sc, void *priv, int residue, int status)
 	microtime(&tv);
 	delta = (tv.tv_sec - sc->tv.tv_sec) * 1000000 + tv.tv_usec - sc->tv.tv_usec;
 #endif
-	
+
 	DPRINTF(UDMASS_CMD,("umass_scsipi_cb: at %lu.%06lu, delta=%u: xs=%p residue=%d"
 	    " status=%d\n", tv.tv_sec, tv.tv_usec, delta, xs, residue, status));
 	xs->resid = residue;
@@ -3397,7 +3397,7 @@ umass_scsipi_cb(struct umass_softc *sc, void *priv, int residue, int status)
 	splx(s);
 }
 
-/* 
+/*
  * Finalise a completed autosense operation
  */
 Static void
@@ -3426,8 +3426,8 @@ umass_scsipi_sense_cb(struct umass_softc *sc, void *priv, int residue,
 
 		bytes_received = sizeof(xs->sense) - residue;
 
-		if (bytes_received < 8 || 
-		    (bytes_received < xs->sense.extra_len + 8)) 
+		if (bytes_received < 8 ||
+		    (bytes_received < xs->sense.extra_len + 8))
 			xs->error = XS_SHORTSENSE;
 	        else
 			xs->error = XS_SENSE;
@@ -3441,7 +3441,7 @@ umass_scsipi_sense_cb(struct umass_softc *sc, void *priv, int residue,
 		    (xs->sense.flags == 0))
 			xs->error = XS_NOERROR;
 #endif
-		
+
 		break;
 	default:
 		DPRINTF(UDMASS_SCSI, ("%s: Autosense failed, status %d\n",
@@ -3471,7 +3471,7 @@ umass_scsipi_sense_cb(struct umass_softc *sc, void *priv, int residue,
  */
 
 Static int
-umass_ufi_transform(struct umass_softc *sc, struct scsipi_generic *cmd, 
+umass_ufi_transform(struct umass_softc *sc, struct scsipi_generic *cmd,
 		    int cmdlen, struct scsipi_generic *rcmd, int *rcmdlen)
 {
 	*rcmdlen = UFI_COMMAND_LENGTH;
@@ -3489,7 +3489,7 @@ umass_ufi_transform(struct umass_softc *sc, struct scsipi_generic *cmd,
 		rcmd->opcode = START_STOP;
 		rcmd->bytes[3] = SSS_START;
 		return 1;
-	} 
+	}
 
 	switch (cmd->opcode) {
 	/* Commands of which the format has been verified. They should work. */
@@ -3511,7 +3511,7 @@ umass_ufi_transform(struct umass_softc *sc, struct scsipi_generic *cmd,
 		memcpy(rcmd, cmd, cmdlen);
 		return (1);	/* success */
 
-	/* 
+	/*
 	 * Other UFI commands: FORMAT_UNIT, MODE_SELECT, READ_FORMAT_CAPACITY,
 	 * VERIFY, WRITE_AND_VERIFY.
 	 * These should be checked whether they somehow can be made to fit.
@@ -3550,11 +3550,11 @@ umass_atapi_probedev(atapi, target)
 	if (atapi->sc_link[target])
 		return;
 
-	sc_link = malloc(sizeof(*sc_link), M_DEVBUF, M_NOWAIT); 
+	sc_link = malloc(sizeof(*sc_link), M_DEVBUF, M_NOWAIT);
 	if (sc_link == NULL) {
 		printf("%s: can't allocate link for drive %d\n",
 		       atapi->sc_dev.dv_xname, target);
-		return;       
+		return;
 	}
 	*sc_link = *atapi->adapter_link;
 
diff --git a/sys/dev/usb/umct.c b/sys/dev/usb/umct.c
index 6ebd3768811..541be52c093 100644
--- a/sys/dev/usb/umct.c
+++ b/sys/dev/usb/umct.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: umct.c,v 1.3 2002/06/11 06:42:17 nate Exp $	*/
+/*	$OpenBSD: umct.c,v 1.4 2002/07/25 02:18:11 nate Exp $	*/
 /*	$NetBSD: umct.c,v 1.7 2001/12/17 14:19:39 ichiro Exp $	*/
 /*
  * Copyright (c) 2001 The NetBSD Foundation, Inc.
@@ -172,7 +172,7 @@ USB_ATTACH(umct)
 	usb_config_descriptor_t *cdesc;
 	usb_interface_descriptor_t *id;
 	usb_endpoint_descriptor_t *ed;
-	
+
 	char devinfo[1024];
 	char *devname = USBDEVNAME(sc->sc_dev);
 	usbd_status err;
@@ -188,7 +188,7 @@ USB_ATTACH(umct)
 
 	DPRINTF(("\n\numct attach: sc=%p\n", sc));
 
-	/* initialize endpoints */ 
+	/* initialize endpoints */
 	uca.bulkin = uca.bulkout = -1;
 	sc->sc_intr_number = -1;
 	sc->sc_intr_pipe = NULL;
@@ -213,7 +213,7 @@ USB_ATTACH(umct)
 	}
 
 	/* get the interface */
-	err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX, 
+	err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX,
 							&sc->sc_iface);
 	if (err) {
 		printf("\n%s: failed to get interface, err=%s\n",
@@ -531,7 +531,7 @@ umct_open(void *addr, int portno)
 {
 	struct umct_softc *sc = addr;
 	int err, lcr_data;
-	
+
 	if (sc->sc_dying)
 		return (EIO);
 
@@ -540,7 +540,7 @@ umct_open(void *addr, int portno)
 	/* initialize LCR */
         lcr_data = LCR_DATA_BITS_8 | LCR_PARITY_NONE |
 	    LCR_STOP_BITS_1;
-        umct_set_lcr(sc, lcr_data);  
+        umct_set_lcr(sc, lcr_data);
 
 	if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) {
 		sc->sc_status = 0; /* clear status bit */
@@ -560,7 +560,7 @@ umct_open(void *addr, int portno)
 }
 
 void
-umct_close(void *addr, int portno) 
+umct_close(void *addr, int portno)
 {
 	struct umct_softc *sc = addr;
 	int err;
@@ -589,7 +589,7 @@ umct_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
 {
 	struct umct_softc *sc = priv;
 	u_char *buf = sc->sc_intr_buf;
-	u_char mstatus, lstatus; 
+	u_char mstatus, lstatus;
 
 	if (sc->sc_dying)
 		return;
diff --git a/sys/dev/usb/umidi.c b/sys/dev/usb/umidi.c
index b081ed5ae9f..8829f586750 100644
--- a/sys/dev/usb/umidi.c
+++ b/sys/dev/usb/umidi.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: umidi.c,v 1.4 2002/07/09 15:22:08 nate Exp $	*/
+/*	$OpenBSD: umidi.c,v 1.5 2002/07/25 02:18:11 nate Exp $	*/
 /*	$NetBSD: umidi.c,v 1.15 2002/06/19 13:51:34 tshiozak Exp $	*/
 /*
  * Copyright (c) 2001 The NetBSD Foundation, Inc.
@@ -150,7 +150,7 @@ USB_MATCH(umidi)
 		return UMATCH_IFACECLASS_IFACESUBCLASS;
 
 	id = usbd_get_interface_descriptor(uaa->iface);
-	if (id!=NULL && 
+	if (id!=NULL &&
 	    id->bInterfaceClass==UICLASS_AUDIO &&
 	    id->bInterfaceSubClass==UISUBCLASS_MIDISTREAM)
 		return UMATCH_IFACECLASS_IFACESUBCLASS;
@@ -218,7 +218,7 @@ USB_ATTACH(umidi)
 
 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH,
 			   sc->sc_udev, USBDEV(sc->sc_dev));
-	
+
 	USB_ATTACH_SUCCESS_RETURN;
 error:
 	printf("%s: disabled.\n", USBDEVNAME(sc->sc_dev));
@@ -690,7 +690,7 @@ alloc_all_endpoints_genuine(struct umidi_softc *sc)
 		p->num_open = 0;
 		p++;
 	}
-	
+
 	sc->sc_out_ep = sc->sc_out_num_endpoints ? sc->sc_endpoints : NULL;
 	sc->sc_in_ep =
 	    sc->sc_in_num_endpoints ?
diff --git a/sys/dev/usb/umidivar.h b/sys/dev/usb/umidivar.h
index 7d471b20b5c..6a766b0a5bb 100644
--- a/sys/dev/usb/umidivar.h
+++ b/sys/dev/usb/umidivar.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: umidivar.h,v 1.3 2002/06/11 07:49:57 nate Exp $	*/
+/*	$OpenBSD: umidivar.h,v 1.4 2002/07/25 02:18:11 nate Exp $	*/
 /*	$NetBSD: umidivar.h,v 1.3 2001/02/03 18:50:32 tshiozak Exp $	*/
 /*
  * Copyright (c) 2001 The NetBSD Foundation, Inc.
@@ -60,8 +60,8 @@ struct umidi_packet {
  * <-- parent	       child -->
  *
  * umidi(sc) -> endpoint -> jack   <- (dynamically assignable) - mididev
- *	   ^	 |    ^	    | 
- *	   +-----+    +-----+ 
+ *	   ^	 |    ^	    |
+ *	   +-----+    +-----+
  */
 
 /* midi device */
diff --git a/sys/dev/usb/umodem.c b/sys/dev/usb/umodem.c
index f7aa0f57cc4..92ddb986339 100644
--- a/sys/dev/usb/umodem.c
+++ b/sys/dev/usb/umodem.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: umodem.c,v 1.10 2002/06/11 02:59:15 nate Exp $ */
+/*	$OpenBSD: umodem.c,v 1.11 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: umodem.c,v 1.41 2001/11/13 06:24:56 lukem Exp $	*/
 
 /*
@@ -234,8 +234,8 @@ USB_ATTACH(umodem)
 		goto bad;
 	}
 
-	/* 
-	 * Find the bulk endpoints. 
+	/*
+	 * Find the bulk endpoints.
 	 * Iterate over all endpoints in the data interface and take note.
 	 */
 	uca.bulkin = uca.bulkout = -1;
@@ -463,7 +463,7 @@ umodem_get_caps(usbd_device_handle dev, int *cm, int *acm)
 		return;
 	}
 	*acm = cad->bmCapabilities;
-} 
+}
 
 void
 umodem_get_status(void *addr, int portno, u_char *lsr, u_char *msr)
@@ -531,7 +531,7 @@ umodem_ioctl(void *addr, int portno, u_long cmd, caddr_t data, int flag,
 
 	if (sc->sc_dying)
 		return (EIO);
- 
+
 	DPRINTF(("umodemioctl: cmd=0x%08lx\n", cmd));
 
 	switch (cmd) {
@@ -658,7 +658,7 @@ umodem_set_line_coding(struct umodem_softc *sc, usb_cdc_line_state_t *state)
 
 	err = usbd_do_request(sc->sc_udev, &req, state);
 	if (err) {
-		DPRINTF(("umodem_set_line_coding: failed, err=%s\n", 
+		DPRINTF(("umodem_set_line_coding: failed, err=%s\n",
 			 usbd_errstr(err)));
 		return (err);
 	}
diff --git a/sys/dev/usb/ums.c b/sys/dev/usb/ums.c
index 324e5119a2c..e557ea387c4 100644
--- a/sys/dev/usb/ums.c
+++ b/sys/dev/usb/ums.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ums.c,v 1.9 2002/05/09 15:06:29 nate Exp $ */
+/*	$OpenBSD: ums.c,v 1.10 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: ums.c,v 1.55 2001/12/31 12:15:22 augustss Exp $	*/
 
 /*
@@ -132,7 +132,7 @@ USB_MATCH(ums)
 	struct uhidev_attach_arg *uha = (struct uhidev_attach_arg *)uaa;
 	int size;
 	void *desc;
-	
+
 	uhidev_get_report_desc(uha->parent, &desc, &size);
 	if (!hid_is_collection(desc, size, uha->reportid,
 			       HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_MOUSE)))
@@ -223,12 +223,12 @@ USB_ATTACH(ums)
 
 #ifdef USB_DEBUG
 	DPRINTF(("ums_attach: sc=%p\n", sc));
-	DPRINTF(("ums_attach: X\t%d/%d\n", 
+	DPRINTF(("ums_attach: X\t%d/%d\n",
 		 sc->sc_loc_x.pos, sc->sc_loc_x.size));
-	DPRINTF(("ums_attach: Y\t%d/%d\n", 
+	DPRINTF(("ums_attach: Y\t%d/%d\n",
 		 sc->sc_loc_y.pos, sc->sc_loc_y.size));
 	if (sc->flags & UMS_Z)
-		DPRINTF(("ums_attach: Z\t%d/%d\n", 
+		DPRINTF(("ums_attach: Z\t%d/%d\n",
 			 sc->sc_loc_z.pos, sc->sc_loc_z.size));
 	for (i = 1; i <= sc->nbuttons; i++) {
 		DPRINTF(("ums_attach: B%d\t%d/%d\n",
diff --git a/sys/dev/usb/uplcom.c b/sys/dev/usb/uplcom.c
index fb08012ef24..5c25c9a9c25 100644
--- a/sys/dev/usb/uplcom.c
+++ b/sys/dev/usb/uplcom.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uplcom.c,v 1.5 2002/07/10 03:02:50 nate Exp $	*/
+/*	$OpenBSD: uplcom.c,v 1.6 2002/07/25 02:18:11 nate Exp $	*/
 /*	$NetBSD: uplcom.c,v 1.27 2002/03/16 16:10:19 ichiro Exp $	*/
 /*
  * Copyright (c) 2001 The NetBSD Foundation, Inc.
@@ -188,7 +188,7 @@ USB_ATTACH(uplcom)
 	usb_config_descriptor_t *cdesc;
 	usb_interface_descriptor_t *id;
 	usb_endpoint_descriptor_t *ed;
-	
+
 	char devinfo[1024];
 	char *devname = USBDEVNAME(sc->sc_dev);
 	usbd_status err;
@@ -203,7 +203,7 @@ USB_ATTACH(uplcom)
 
 	DPRINTF(("\n\nuplcom attach: sc=%p\n", sc));
 
-	/* initialize endpoints */ 
+	/* initialize endpoints */
 	uca.bulkin = uca.bulkout = -1;
 	sc->sc_intr_number = -1;
 	sc->sc_intr_pipe = NULL;
@@ -228,7 +228,7 @@ USB_ATTACH(uplcom)
 	}
 
 	/* get the (first/common) interface */
-	err = usbd_device2interface_handle(dev, UPLCOM_IFACE_INDEX, 
+	err = usbd_device2interface_handle(dev, UPLCOM_IFACE_INDEX,
 							&sc->sc_iface);
 	if (err) {
 		printf("\n%s: failed to get interface, err=%s\n",
@@ -255,7 +255,7 @@ USB_ATTACH(uplcom)
 		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
 			sc->sc_intr_number = ed->bEndpointAddress;
 			sc->sc_isize = UGETW(ed->wMaxPacketSize);
-		} 
+		}
 	}
 
 	if (sc->sc_intr_number== -1) {
@@ -277,11 +277,11 @@ USB_ATTACH(uplcom)
 	 *  Interrupt(0x81) | Interrupt(0x81)
 	 * -----------------+ BulkIN(0x02)
 	 * Interface 1	    | BulkOUT(0x83)
-	 *   BulkIN(0x02)   | 
+	 *   BulkIN(0x02)   |
 	 *   BulkOUT(0x83)  |
 	 */
 	if (cdesc->bNumInterface == 2) {
-		err = usbd_device2interface_handle(dev, 
+		err = usbd_device2interface_handle(dev,
 				UPLCOM_SECOND_IFACE_INDEX, &sc->sc_iface);
 		if (err) {
 			printf("\n%s: failed to get second interface, err=%s\n",
@@ -289,7 +289,7 @@ USB_ATTACH(uplcom)
 			sc->sc_dying = 1;
 			USB_ATTACH_ERROR_RETURN;
 		}
-	} 
+	}
 
 	/* Find the bulk{in,out} endpoints */
 
@@ -416,9 +416,9 @@ uplcom_reset(struct uplcom_softc *sc)
         req.bRequest = UPLCOM_SET_REQUEST;
         USETW(req.wValue, 0);
         USETW(req.wIndex, sc->sc_iface_number);
-        USETW(req.wLength, 0); 
- 
-        err = usbd_do_request(sc->sc_udev, &req, 0); 
+        USETW(req.wLength, 0);
+
+        err = usbd_do_request(sc->sc_udev, &req, 0);
 	if (err)
 		return (EIO);
 
@@ -619,7 +619,7 @@ uplcom_open(void *addr, int portno)
 {
 	struct uplcom_softc *sc = addr;
 	int err;
-	
+
 	if (sc->sc_dying)
 		return (EIO);
 
@@ -643,7 +643,7 @@ uplcom_open(void *addr, int portno)
 }
 
 void
-uplcom_close(void *addr, int portno) 
+uplcom_close(void *addr, int portno)
 {
 	struct uplcom_softc *sc = addr;
 	int err;
diff --git a/sys/dev/usb/urio.c b/sys/dev/usb/urio.c
index d1d0e25f699..b923c49a536 100644
--- a/sys/dev/usb/urio.c
+++ b/sys/dev/usb/urio.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: urio.c,v 1.12 2002/07/10 21:41:51 mickey Exp $	*/
+/*	$OpenBSD: urio.c,v 1.13 2002/07/25 02:18:11 nate Exp $	*/
 /*	$NetBSD: urio.c,v 1.11 2002/02/11 15:11:49 augustss Exp $	*/
 
 /*
@@ -300,7 +300,7 @@ urioopen(dev_t dev, int flag, int mode, usb_proc_ptr p)
 
 	USB_GET_SC_OPEN(urio, URIOUNIT(dev), sc);
 
-	DPRINTFN(5, ("urioopen: flag=%d, mode=%d, unit=%d\n", 
+	DPRINTFN(5, ("urioopen: flag=%d, mode=%d, unit=%d\n",
 		     flag, mode, URIOUNIT(dev)));
 
 	if (sc->sc_dying)
@@ -417,7 +417,7 @@ uriowrite(dev_t dev, struct uio *uio, int flag)
 
 	USB_GET_SC(urio, URIOUNIT(dev), sc);
 
-	DPRINTFN(5, ("uriowrite: unit=%d, len=%ld\n", URIOUNIT(dev), 
+	DPRINTFN(5, ("uriowrite: unit=%d, len=%ld\n", URIOUNIT(dev),
 		     (long)uio->uio_resid));
 
 	if (sc->sc_dying)
@@ -460,7 +460,7 @@ uriowrite(dev_t dev, struct uio *uio, int flag)
 	if (--sc->sc_refcnt < 0)
 		usb_detach_wakeup(USBDEV(sc->sc_dev));
 
-	DPRINTFN(5, ("uriowrite: done unit=%d, error=%d\n", URIOUNIT(dev), 
+	DPRINTFN(5, ("uriowrite: done unit=%d, error=%d\n", URIOUNIT(dev),
 		     error));
 
 	return (error);
@@ -509,7 +509,7 @@ urioioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, usb_proc_ptr p)
 	len = rcmd->length;
 
 	DPRINTFN(1,("urio_ioctl: cmd=0x%08lx reqtype=0x%0x req=0x%0x "
-		    "value=0x%0x index=0x%0x len=0x%0x\n", 
+		    "value=0x%0x index=0x%0x len=0x%0x\n",
 		    cmd, requesttype, rcmd->request, rcmd->value,
 		    rcmd->index, len));
 
@@ -530,7 +530,7 @@ urioioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, usb_proc_ptr p)
 		uio.uio_resid = len;
 		uio.uio_offset = 0;
 		uio.uio_segflg = UIO_USERSPACE;
-		uio.uio_rw = req.bmRequestType & UT_READ ? 
+		uio.uio_rw = req.bmRequestType & UT_READ ?
 			     UIO_READ : UIO_WRITE;
 		uio.uio_procp = p;
 		ptr = malloc(len, M_TEMP, M_WAITOK);
diff --git a/sys/dev/usb/usb.c b/sys/dev/usb/usb.c
index b6f325ab0af..2d703ec4e33 100644
--- a/sys/dev/usb/usb.c
+++ b/sys/dev/usb/usb.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usb.c,v 1.22 2002/07/11 03:11:17 nate Exp $	*/
+/*	$OpenBSD: usb.c,v 1.23 2002/07/25 02:18:11 nate Exp $	*/
 /*	$NetBSD: usb.c,v 1.53 2001/01/23 17:04:30 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usb.c,v 1.20 1999/11/17 22:33:46 n_hibma Exp $	*/
 
@@ -79,7 +79,7 @@ int	uhcidebug;
 #ifdef OHCI_DEBUG
 int	ohcidebug;
 #endif
-/* 
+/*
  * 0  - do usual exploration
  * 1  - do not use timeout exploration
  * >1 - do no exploration
@@ -116,7 +116,7 @@ struct usb_event_q {
 	struct usb_event ue;
 	SIMPLEQ_ENTRY(usb_event_q) next;
 };
-Static SIMPLEQ_HEAD(, usb_event_q) usb_events = 
+Static SIMPLEQ_HEAD(, usb_event_q) usb_events =
 	SIMPLEQ_HEAD_INITIALIZER(usb_events);
 Static int usb_nevents = 0;
 Static struct selinfo usb_selevent;
@@ -143,7 +143,7 @@ USB_ATTACH(usb)
 	usbd_status err;
 	int usbrev;
 	struct usb_event ue;
-	
+
 	DPRINTF(("usbd_attach\n"));
 
 	usbd_init();
@@ -175,13 +175,13 @@ USB_ATTACH(usb)
 		dev = sc->sc_port.device;
 		if (dev->hub == NULL) {
 			sc->sc_dying = 1;
-			printf("%s: root device is not a hub\n", 
+			printf("%s: root device is not a hub\n",
 			       USBDEVNAME(sc->sc_dev));
 			USB_ATTACH_ERROR_RETURN;
 		}
 		sc->sc_bus->root_hub = dev;
 #if 1
-		/* 
+		/*
 		 * Turning this code off will delay attachment of USB devices
 		 * until the USB event thread is running, which means that
 		 * the keyboard will not work until after cold boot.
@@ -190,8 +190,8 @@ USB_ATTACH(usb)
 			dev->hub->explore(sc->sc_bus->root_hub);
 #endif
 	} else {
-		printf("%s: root hub problem, error=%d\n", 
-		       USBDEVNAME(sc->sc_dev), err); 
+		printf("%s: root hub problem, error=%d\n",
+		       USBDEVNAME(sc->sc_dev), err);
 		sc->sc_dying = 1;
 	}
 	if (cold)
@@ -382,7 +382,7 @@ usbioctl(dev_t devt, u_long cmd, caddr_t data, int flag, struct proc *p)
 		case FIONBIO:
 			/* All handled in the upper FS layer. */
 			return (0);
-			
+
 		case FIOASYNC:
 			if (*(int *)data)
 				usb_async_proc = p;
@@ -426,7 +426,7 @@ usbioctl(dev_t devt, u_long cmd, caddr_t data, int flag, struct proc *p)
 		DPRINTF(("usbioctl: USB_REQUEST addr=%d len=%d\n", addr, len));
 		if (len < 0 || len > 32768)
 			return (EINVAL);
-		if (addr < 0 || addr >= USB_MAX_DEVICES || 
+		if (addr < 0 || addr >= USB_MAX_DEVICES ||
 		    sc->sc_bus->devices[addr] == 0)
 			return (EINVAL);
 		if (len != 0) {
@@ -438,7 +438,7 @@ usbioctl(dev_t devt, u_long cmd, caddr_t data, int flag, struct proc *p)
 			uio.uio_offset = 0;
 			uio.uio_segflg = UIO_USERSPACE;
 			uio.uio_rw =
-				ur->ucr_request.bmRequestType & UT_READ ? 
+				ur->ucr_request.bmRequestType & UT_READ ?
 				UIO_READ : UIO_WRITE;
 			uio.uio_procp = p;
 			ptr = malloc(len, M_TEMP, M_WAITOK);
@@ -501,14 +501,14 @@ usbpoll(dev_t dev, int events, struct proc *p)
 	if (minor(dev) == USB_DEV_MINOR) {
 		revents = 0;
 		mask = POLLIN | POLLRDNORM;
-		
+
 		s = splusb();
 		if (events & mask && usb_nevents > 0)
 			revents |= events & mask;
 		if (revents == 0 && events & mask)
 			selrecord(p, &usb_selevent);
 		splx(s);
-		
+
 		return (revents);
 	} else {
 		return (ENXIO);
@@ -526,7 +526,7 @@ usb_discover(void *v)
 	if (usb_noexplore > 1)
 		return;
 #endif
-	/* 
+	/*
 	 * We need mutual exclusion while traversing the device tree,
 	 * but this is guaranteed since this function is only called
 	 * from the event thread for the controller.
@@ -576,7 +576,7 @@ usbd_add_drv_event(int type, usbd_device_handle udev, device_ptr_t dev)
 	struct usb_event ue;
 
 	ue.u.ue_driver.ue_cookie = udev->cookie;
-	strncpy(ue.u.ue_driver.ue_devname, USBDEVPTRNAME(dev), 
+	strncpy(ue.u.ue_driver.ue_devname, USBDEVPTRNAME(dev),
 	    sizeof ue.u.ue_driver.ue_devname);
 	usb_add_event(type, &ue);
 }
diff --git a/sys/dev/usb/usb.h b/sys/dev/usb/usb.h
index 08139911857..38764f82edb 100644
--- a/sys/dev/usb/usb.h
+++ b/sys/dev/usb/usb.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usb.h,v 1.19 2002/06/11 03:47:29 nate Exp $ */
+/*	$OpenBSD: usb.h,v 1.20 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usb.h,v 1.52 2001/07/23 15:17:50 nathanw Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usb.h,v 1.14 1999/11/17 22:33:46 n_hibma Exp $	*/
 
@@ -97,7 +97,7 @@ typedef u_int8_t uDWord[4];
 		     (w)[2] = (u_int8_t)((v) >> 16), \
 		     (w)[3] = (u_int8_t)((v) >> 24))
 #else
-/* 
+/*
  * On little-endian machines that can handle unanliged accesses
  * (e.g. i386) these macros can be replaced by the following.
  */
@@ -406,7 +406,7 @@ typedef struct {
 #define   UIPROTO_DATA_Q921M		0x50    /* Management for Q921 */
 #define   UIPROTO_DATA_Q921		0x51    /* Data for Q921 */
 #define   UIPROTO_DATA_Q921TM		0x52    /* TEI multiplexer for Q921 */
-#define   UIPROTO_DATA_V42BIS		0x90    /* Data compression */  
+#define   UIPROTO_DATA_V42BIS		0x90    /* Data compression */
 #define   UIPROTO_DATA_Q931		0x91    /* Euro-ISDN */
 #define   UIPROTO_DATA_V120		0x92    /* V.24 rate adaption */
 #define   UIPROTO_DATA_CAPI		0x93    /* CAPI 2.0 commands */
@@ -422,8 +422,8 @@ typedef struct {
 
 #define USB_HUB_MAX_DEPTH 5
 
-/* 
- * Minimum time a device needs to be powered down to go through 
+/*
+ * Minimum time a device needs to be powered down to go through
  * a power cycle.  XXX Are these time in the spec?
  */
 #define USB_POWER_DOWN_TIME	200 /* ms */
@@ -574,7 +574,7 @@ struct usb_event {
 		struct {
 			usb_event_cookie_t	ue_cookie;
 			char			ue_devname[16];
-		} ue_driver;			
+		} ue_driver;
 	} u;
 };
 
diff --git a/sys/dev/usb/usb_mem.c b/sys/dev/usb/usb_mem.c
index a24c44ba309..bd917fd6486 100644
--- a/sys/dev/usb/usb_mem.c
+++ b/sys/dev/usb/usb_mem.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usb_mem.c,v 1.12 2002/05/05 22:23:43 nate Exp $ */
+/*	$OpenBSD: usb_mem.c,v 1.13 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usb_mem.c,v 1.22 2001/11/13 06:24:56 lukem Exp $	*/
 
 /*
@@ -86,7 +86,7 @@ Static usbd_status	usb_block_allocmem(bus_dma_tag_t, size_t, size_t,
 					   usb_dma_block_t **);
 Static void		usb_block_freemem(usb_dma_block_t *);
 
-Static LIST_HEAD(, usb_dma_block) usb_blk_freelist = 
+Static LIST_HEAD(, usb_dma_block) usb_blk_freelist =
 	LIST_HEAD_INITIALIZER(usb_blk_freelist);
 Static int usb_blk_nfree = 0;
 /* XXX should have different free list for different tags (for speed) */
@@ -101,7 +101,7 @@ usb_block_allocmem(bus_dma_tag_t tag, size_t size, size_t align,
         usb_dma_block_t *p;
 	int s;
 
-	DPRINTFN(5, ("usb_block_allocmem: size=%lu align=%lu\n", 
+	DPRINTFN(5, ("usb_block_allocmem: size=%lu align=%lu\n",
 		     (u_long)size, (u_long)align));
 
 #ifdef DIAGNOSTIC
@@ -148,7 +148,7 @@ usb_block_allocmem(bus_dma_tag_t tag, size_t size, size_t align,
 	if (error)
 		return (USBD_NOMEM);
 
-	error = bus_dmamem_map(tag, p->segs, p->nsegs, p->size, 
+	error = bus_dmamem_map(tag, p->segs, p->nsegs, p->size,
 			       &p->kaddr, BUS_DMA_NOWAIT|BUS_DMA_COHERENT);
 	if (error)
 		goto free;
@@ -158,7 +158,7 @@ usb_block_allocmem(bus_dma_tag_t tag, size_t size, size_t align,
 	if (error)
 		goto unmap;
 
-	error = bus_dmamap_load(tag, p->map, p->kaddr, p->size, NULL, 
+	error = bus_dmamap_load(tag, p->map, p->kaddr, p->size, NULL,
 				BUS_DMA_NOWAIT);
 	if (error)
 		goto destroy;
@@ -229,7 +229,7 @@ usb_allocmem(usbd_bus_handle bus, size_t size, size_t align, usb_dma_t *p)
 		}
 		return (err);
 	}
-	
+
 	s = splusb();
 	/* Check for free fragments. */
 	for (f = LIST_FIRST(&usb_frag_freelist); f; f = LIST_NEXT(f, next))
diff --git a/sys/dev/usb/usb_mem.h b/sys/dev/usb/usb_mem.h
index 23879b7e546..9c7d91b3ae2 100644
--- a/sys/dev/usb/usb_mem.h
+++ b/sys/dev/usb/usb_mem.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usb_mem.h,v 1.8 2000/11/08 18:10:39 aaron Exp $ */
+/*	$OpenBSD: usb_mem.h,v 1.9 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usb_mem.h,v 1.15 2000/06/28 16:39:27 mrg Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usb_mem.h,v 1.9 1999/11/17 22:33:47 n_hibma Exp $	*/
 
@@ -60,7 +60,7 @@ void		usb_freemem(usbd_bus_handle, usb_dma_t *);
 
 #elif defined(__FreeBSD__)
 
-/* 
+/*
  * FreeBSD does not have special functions for dma memory, so let's keep it
  * simple for now.
  */
diff --git a/sys/dev/usb/usb_port.h b/sys/dev/usb/usb_port.h
index 70e08be1137..4b4d3004cc0 100644
--- a/sys/dev/usb/usb_port.h
+++ b/sys/dev/usb/usb_port.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usb_port.h,v 1.39 2002/05/19 18:45:42 miod Exp $ */
+/*	$OpenBSD: usb_port.h,v 1.40 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usb_port.h,v 1.44 2001/05/14 20:35:29 bouyer Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usb_port.h,v 1.21 1999/11/17 22:33:47 n_hibma Exp $	*/
 
@@ -42,7 +42,7 @@
 #ifndef _USB_PORT_H
 #define _USB_PORT_H
 
-/* 
+/*
  * Macro's to cope with the differences between operating systems.
  */
 
diff --git a/sys/dev/usb/usb_quirks.c b/sys/dev/usb/usb_quirks.c
index 29ee6f87b7c..5556b98b020 100644
--- a/sys/dev/usb/usb_quirks.c
+++ b/sys/dev/usb/usb_quirks.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usb_quirks.c,v 1.13 2002/05/07 20:06:28 nate Exp $ */
+/*	$OpenBSD: usb_quirks.c,v 1.14 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usb_quirks.c,v 1.39 2001/11/13 06:24:56 lukem Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usb_quirks.c,v 1.13 1999/11/17 22:33:47 n_hibma Exp $	*/
 
@@ -41,7 +41,7 @@
 
 #include <sys/param.h>
 #include <sys/systm.h>
- 
+
 #include <dev/usb/usb.h>
 
 #include <dev/usb/usbdevs.h>
@@ -60,7 +60,7 @@ Static const struct usbd_quirk_entry {
 	struct usbd_quirks quirks;
 } usb_quirks[] = {
  { USB_VENDOR_KYE, USB_PRODUCT_KYE_NICHE,	    0x100, { UQ_NO_SET_PROTO}},
- { USB_VENDOR_INSIDEOUT, USB_PRODUCT_INSIDEOUT_EDGEPORT4, 
+ { USB_VENDOR_INSIDEOUT, USB_PRODUCT_INSIDEOUT_EDGEPORT4,
    						    0x094, { UQ_SWAP_UNICODE}},
  { USB_VENDOR_BTC, USB_PRODUCT_BTC_BTC7932,	    0x100, { UQ_NO_STRINGS }},
  { USB_VENDOR_ADS, USB_PRODUCT_ADS_UBS10BT,	    0x002, { UQ_NO_STRINGS }},
@@ -110,7 +110,7 @@ usbd_find_quirk(usb_device_descriptor_t *d)
 	}
 #ifdef USB_DEBUG
 	if (usbdebug && t->quirks.uq_flags)
-		logprintf("usbd_find_quirk 0x%04x/0x%04x/%x: %d\n", 
+		logprintf("usbd_find_quirk 0x%04x/0x%04x/%x: %d\n",
 			  UGETW(d->idVendor), UGETW(d->idProduct),
 			  UGETW(d->bcdDevice), t->quirks.uq_flags);
 #endif
diff --git a/sys/dev/usb/usb_subr.c b/sys/dev/usb/usb_subr.c
index 2845b2ddafc..703d5f2515b 100644
--- a/sys/dev/usb/usb_subr.c
+++ b/sys/dev/usb/usb_subr.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usb_subr.c,v 1.21 2002/05/07 18:29:18 nate Exp $ */
+/*	$OpenBSD: usb_subr.c,v 1.22 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usb_subr.c,v 1.87 2001/08/15 00:04:59 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usb_subr.c,v 1.18 1999/11/17 22:33:47 n_hibma Exp $	*/
 
@@ -203,7 +203,7 @@ usbd_get_string(usbd_device_handle dev, int si, char *buf)
 			*s++ = c;
 		else if ((c & 0x00ff) == 0 && swap)
 			*s++ = c >> 8;
-		else 
+		else
 			*s++ = '?';
 	}
 	*s++ = 0;
@@ -254,7 +254,7 @@ usbd_devinfo_vp(usbd_device_handle dev, char *v, char *p, int usedev)
 		for(kdp = usb_knowndevs;
 		    kdp->vendorname != NULL;
 		    kdp++) {
-			if (kdp->vendor == UGETW(udd->idVendor) && 
+			if (kdp->vendor == UGETW(udd->idVendor) &&
 			    (kdp->product == UGETW(udd->idProduct) ||
 			     (kdp->flags & USB_KNOWNDEV_NOPROD) != 0))
 				break;
@@ -331,7 +331,7 @@ usbd_reset_port(usbd_device_handle dev, int port, usb_port_status_t *ps)
 	usb_device_request_t req;
 	usbd_status err;
 	int n;
-	
+
 	req.bmRequestType = UT_WRITE_CLASS_OTHER;
 	req.bRequest = UR_SET_FEATURE;
 	USETW(req.wValue, UHF_PORT_RESET);
@@ -378,7 +378,7 @@ usbd_find_idesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx)
 	for (curidx = lastidx = -1; p < end; ) {
 		d = (usb_interface_descriptor_t *)p;
 		DPRINTFN(4,("usbd_find_idesc: idx=%d(%d) altidx=%d(%d) len=%d "
-			    "type=%d\n", 
+			    "type=%d\n",
 			    ifaceidx, curidx, altidx, curaidx,
 			    d->bLength, d->bDescriptorType));
 		if (d->bLength == 0) /* bad descriptor */
@@ -399,7 +399,7 @@ usbd_find_idesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx)
 }
 
 usb_endpoint_descriptor_t *
-usbd_find_edesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx, 
+usbd_find_edesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx,
 		int endptidx)
 {
 	char *p = (char *)cd;
@@ -636,7 +636,7 @@ usbd_set_config_index(usbd_device_handle dev, int index, int msg)
 	}
 	DPRINTF(("usbd_set_config_index: (addr %d) cno=%d attr=0x%02x, "
 		 "selfpowered=%d, power=%d\n",
-		 cdp->bConfigurationValue, dev->address, cdp->bmAttributes, 
+		 cdp->bConfigurationValue, dev->address, cdp->bmAttributes,
 		 selfpowered, cdp->bMaxPower * 2));
 
 	/* Check if we have enough power. */
@@ -653,8 +653,8 @@ usbd_set_config_index(usbd_device_handle dev, int index, int msg)
 		if (msg)
 			printf("%s: device addr %d (config %d) exceeds power "
 				 "budget, %d mA > %d mA\n",
-			       USBDEVNAME(dev->bus->bdev), dev->address, 
-			       cdp->bConfigurationValue, 
+			       USBDEVNAME(dev->bus->bdev), dev->address,
+			       cdp->bConfigurationValue,
 			       power, dev->powersrc->power);
 		err = USBD_NO_POWER;
 		goto bad;
@@ -675,7 +675,7 @@ usbd_set_config_index(usbd_device_handle dev, int index, int msg)
 
 	/* Allocate and fill interface data. */
 	nifc = cdp->bNumInterface;
-	dev->ifaces = malloc(nifc * sizeof(struct usbd_interface), 
+	dev->ifaces = malloc(nifc * sizeof(struct usbd_interface),
 			     M_USB, M_NOWAIT);
 	if (dev->ifaces == NULL) {
 		err = USBD_NOMEM;
@@ -774,7 +774,7 @@ usbd_probe_and_attach(device_ptr_t parent, usbd_device_handle dev,
 	usbd_interface_handle ifaces[256]; /* 256 is the absolute max */
 
 #if defined(__FreeBSD__)
-	/* 
+	/*
 	 * XXX uaa is a static var. Not a problem as it _should_ be used only
 	 * during probe and attach. Should be changed however.
 	 */
@@ -906,7 +906,7 @@ usbd_probe_and_attach(device_ptr_t parent, usbd_device_handle dev,
 		return (USBD_NORMAL_COMPLETION);
 	}
 
-	/* 
+	/*
 	 * The generic attach failed, but leave the device as it is.
 	 * We just did not find any drivers, that's all.  The device is
 	 * fully operational and not harming anyone.
@@ -939,7 +939,7 @@ usbd_new_device(device_ptr_t parent, usbd_bus_handle bus, int depth,
 		 bus, port, depth, lowspeed));
 	addr = usbd_getnewaddr(bus);
 	if (addr < 0) {
-		printf("%s: No free USB addresses, new device ignored.\n", 
+		printf("%s: No free USB addresses, new device ignored.\n",
 		       USBDEVNAME(bus->bdev));
 		return (USBD_NO_ADDR);
 	}
@@ -997,9 +997,9 @@ usbd_new_device(device_ptr_t parent, usbd_bus_handle bus, int depth,
 	}
 
 	DPRINTF(("usbd_new_device: adding unit addr=%d, rev=%02x, class=%d, "
-		 "subclass=%d, protocol=%d, maxpacket=%d, len=%d, ls=%d\n", 
+		 "subclass=%d, protocol=%d, maxpacket=%d, len=%d, ls=%d\n",
 		 addr,UGETW(dd->bcdUSB), dd->bDeviceClass, dd->bDeviceSubClass,
-		 dd->bDeviceProtocol, dd->bMaxPacketSize, dd->bLength, 
+		 dd->bDeviceProtocol, dd->bMaxPacketSize, dd->bLength,
 		 dev->lowspeed));
 
 	if (dd->bDescriptorType != UDESC_DEVICE) {
@@ -1045,9 +1045,9 @@ usbd_new_device(device_ptr_t parent, usbd_bus_handle bus, int depth,
 	dev->power = USB_MIN_POWER;
 	dev->self_powered = 0;
 
-	DPRINTF(("usbd_new_device: new dev (addr %d), dev=%p, parent=%p\n", 
+	DPRINTF(("usbd_new_device: new dev (addr %d), dev=%p, parent=%p\n",
 		 addr, dev, parent));
-  
+
 	usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev);
 
 	err = usbd_probe_and_attach(parent, dev, port, addr);
@@ -1079,7 +1079,7 @@ void
 usbd_remove_device(usbd_device_handle dev, struct usbd_port *up)
 {
 	DPRINTF(("usbd_remove_device: %p\n", dev));
-  
+
 	if (dev->default_pipe != NULL)
 		usbd_kill_pipe(dev->default_pipe);
 	up->device = 0;
@@ -1109,7 +1109,7 @@ usbd_print(void *aux, const char *pnp)
 	if (uaa->ifaceno != UHUB_UNK_INTERFACE)
 		printf(" interface %d", uaa->ifaceno);
 #if 0
-	/* 
+	/*
 	 * It gets very crowded with these locators on the attach line.
 	 * They are not really needed since they are printed in the clear
 	 * by each driver.
@@ -1219,7 +1219,7 @@ usbd_fill_deviceinfo(usbd_device_handle dev, struct usb_device_info *di,
                 di->udi_devnames[i][0] = 0;                 /* empty */
 
 	if (dev->hub) {
-		for (i = 0; 
+		for (i = 0;
 		     i < sizeof(di->udi_ports) / sizeof(di->udi_ports[0]) &&
 			     i < dev->hub->hubdesc.bNbrPorts;
 		     i++) {
@@ -1288,7 +1288,7 @@ usb_disconnect_port(struct usbd_port *up, device_ptr_t parent)
 	char *hubname = USBDEVPTRNAME(parent);
 	int i;
 
-	DPRINTFN(3,("uhub_disconnect: up=%p dev=%p port=%d\n", 
+	DPRINTFN(3,("uhub_disconnect: up=%p dev=%p port=%d\n",
 		    up, dev, up->portno));
 
 #ifdef DIAGNOSTIC
@@ -1301,7 +1301,7 @@ usb_disconnect_port(struct usbd_port *up, device_ptr_t parent)
 	if (dev->subdevs != NULL) {
 		DPRINTFN(3,("usb_disconnect_port: disconnect subdevs\n"));
 		for (i = 0; dev->subdevs[i]; i++) {
-			printf("%s: at %s", USBDEVPTRNAME(dev->subdevs[i]), 
+			printf("%s: at %s", USBDEVPTRNAME(dev->subdevs[i]),
 			       hubname);
 			if (up->portno != 0)
 				printf(" port %d", up->portno);
diff --git a/sys/dev/usb/usbdevs b/sys/dev/usb/usbdevs
index 7c50e70d24a..4534ff78e1c 100644
--- a/sys/dev/usb/usbdevs
+++ b/sys/dev/usb/usbdevs
@@ -1,4 +1,4 @@
-$OpenBSD: usbdevs,v 1.52 2002/07/25 00:07:08 nate Exp $
+$OpenBSD: usbdevs,v 1.53 2002/07/25 02:18:11 nate Exp $
 /* $NetBSD: usbdevs,v 1.257 2002/06/20 09:20:36 augustss Exp $ */
 
 /*
@@ -1236,7 +1236,7 @@ product TANGTOP USBPS2		0x0001	USBPS2
 
 /* Taugagreining products */
 product TAUGA CAMERAMATE	0x0005	CameraMate (DPCM_USB)
- 
+
 /* TDK products */
 product TDK UPA9664		0x0115	USB-PDC Adapter UPA9664
 product TDK UCA1464		0x0116	USB-cdmaOne Adapter UCA1464
diff --git a/sys/dev/usb/usbdevs.h b/sys/dev/usb/usbdevs.h
index 569bdcc83e4..28481400110 100644
--- a/sys/dev/usb/usbdevs.h
+++ b/sys/dev/usb/usbdevs.h
@@ -1,10 +1,10 @@
-/*	$OpenBSD: usbdevs.h,v 1.54 2002/07/25 00:07:37 nate Exp $	*/
+/*	$OpenBSD: usbdevs.h,v 1.55 2002/07/25 02:18:11 nate Exp $	*/
 
 /*
  * THIS FILE IS AUTOMATICALLY GENERATED.  DO NOT EDIT.
  *
  * generated from:
- *	OpenBSD: usbdevs,v 1.52 2002/07/25 00:07:08 nate Exp 
+ *	OpenBSD: usbdevs,v 1.52 2002/07/25 00:07:08 nate Exp
  */
 /* $NetBSD: usbdevs,v 1.257 2002/06/20 09:20:36 augustss Exp $ */
 
@@ -1243,7 +1243,7 @@
 
 /* Taugagreining products */
 #define	USB_PRODUCT_TAUGA_CAMERAMATE	0x0005		/* CameraMate (DPCM_USB) */
- 
+
 /* TDK products */
 #define	USB_PRODUCT_TDK_UPA9664	0x0115		/* USB-PDC Adapter UPA9664 */
 #define	USB_PRODUCT_TDK_UCA1464	0x0116		/* USB-cdmaOne Adapter UCA1464 */
diff --git a/sys/dev/usb/usbdevs_data.h b/sys/dev/usb/usbdevs_data.h
index 8c92465e0a1..0d03e4871e1 100644
--- a/sys/dev/usb/usbdevs_data.h
+++ b/sys/dev/usb/usbdevs_data.h
@@ -1,10 +1,10 @@
-/*	$OpenBSD: usbdevs_data.h,v 1.54 2002/07/25 00:07:37 nate Exp $	*/
+/*	$OpenBSD: usbdevs_data.h,v 1.55 2002/07/25 02:18:11 nate Exp $	*/
 
 /*
  * THIS FILE IS AUTOMATICALLY GENERATED.  DO NOT EDIT.
  *
  * generated from:
- *	OpenBSD: usbdevs,v 1.52 2002/07/25 00:07:08 nate Exp 
+ *	OpenBSD: usbdevs,v 1.52 2002/07/25 00:07:08 nate Exp
  */
 /* $NetBSD: usbdevs,v 1.257 2002/06/20 09:20:36 augustss Exp $ */
 
diff --git a/sys/dev/usb/usbdi.c b/sys/dev/usb/usbdi.c
index 069457a94a6..9e2570cf152 100644
--- a/sys/dev/usb/usbdi.c
+++ b/sys/dev/usb/usbdi.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usbdi.c,v 1.19 2002/07/09 17:41:02 nate Exp $ */
+/*	$OpenBSD: usbdi.c,v 1.20 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usbdi.c,v 1.81 2001/04/17 00:05:33 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usbdi.c,v 1.28 1999/11/17 22:33:49 n_hibma Exp $	*/
 
@@ -78,7 +78,7 @@ extern int usbdebug;
 #endif
 
 Static usbd_status usbd_ar_pipe(usbd_pipe_handle pipe);
-Static void usbd_do_request_async_cb 
+Static void usbd_do_request_async_cb
 (usbd_xfer_handle, usbd_private_handle, usbd_status);
 Static void usbd_start_next(usbd_pipe_handle pipe);
 Static usbd_status usbd_open_pipe_ival
@@ -124,18 +124,18 @@ usbd_dump_queue(usbd_pipe_handle pipe)
 }
 #endif
 
-usbd_status 
+usbd_status
 usbd_open_pipe(usbd_interface_handle iface, u_int8_t address,
 	       u_int8_t flags, usbd_pipe_handle *pipe)
-{ 
-	return (usbd_open_pipe_ival(iface, address, flags, pipe, 
+{
+	return (usbd_open_pipe_ival(iface, address, flags, pipe,
 				    USBD_DEFAULT_INTERVAL));
 }
 
-usbd_status 
+usbd_status
 usbd_open_pipe_ival(usbd_interface_handle iface, u_int8_t address,
 		    u_int8_t flags, usbd_pipe_handle *pipe, int ival)
-{ 
+{
 	usbd_pipe_handle p;
 	struct usbd_endpoint *ep;
 	usbd_status err;
@@ -163,7 +163,7 @@ usbd_open_pipe_ival(usbd_interface_handle iface, u_int8_t address,
 	return (USBD_NORMAL_COMPLETION);
 }
 
-usbd_status 
+usbd_status
 usbd_open_pipe_intr(usbd_interface_handle iface, u_int8_t address,
 		    u_int8_t flags, usbd_pipe_handle *pipe,
 		    usbd_private_handle priv, void *buffer, u_int32_t len,
@@ -176,7 +176,7 @@ usbd_open_pipe_intr(usbd_interface_handle iface, u_int8_t address,
 	DPRINTFN(3,("usbd_open_pipe_intr: address=0x%x flags=0x%x len=%d\n",
 		    address, flags, len));
 
-	err = usbd_open_pipe_ival(iface, address, USBD_EXCLUSIVE_USE, 
+	err = usbd_open_pipe_ival(iface, address, USBD_EXCLUSIVE_USE,
 				  &ipipe, ival);
 	if (err)
 		return (err);
@@ -269,7 +269,7 @@ usbd_transfer(usbd_xfer_handle xfer)
 	}
 
 	/* Copy data if going out. */
-	if (!(xfer->flags & USBD_NO_COPY) && size != 0 && 
+	if (!(xfer->flags & USBD_NO_COPY) && size != 0 &&
 	    !usbd_xfer_isread(xfer))
 		memcpy(KERNADDR(dmap), xfer->buffer, size);
 
@@ -343,7 +343,7 @@ usbd_get_buffer(usbd_xfer_handle xfer)
 	return (KERNADDR(&xfer->dmabuf));
 }
 
-usbd_xfer_handle 
+usbd_xfer_handle
 usbd_alloc_xfer(usbd_device_handle dev)
 {
 	usbd_xfer_handle xfer;
@@ -357,7 +357,7 @@ usbd_alloc_xfer(usbd_device_handle dev)
 	return (xfer);
 }
 
-usbd_status 
+usbd_status
 usbd_free_xfer(usbd_xfer_handle xfer)
 {
 	DPRINTFN(5,("usbd_free_xfer: %p\n", xfer));
@@ -484,7 +484,7 @@ usbd_interface2endpoint_descriptor(usbd_interface_handle iface, u_int8_t index)
 	return (iface->endpoints[index].edesc);
 }
 
-usbd_status 
+usbd_status
 usbd_abort_pipe(usbd_pipe_handle pipe)
 {
 	usbd_status err;
@@ -501,8 +501,8 @@ usbd_abort_pipe(usbd_pipe_handle pipe)
 	splx(s);
 	return (err);
 }
-	
-usbd_status 
+
+usbd_status
 usbd_clear_endpoint_stall(usbd_pipe_handle pipe)
 {
 	usbd_device_handle dev = pipe->device;
@@ -511,7 +511,7 @@ usbd_clear_endpoint_stall(usbd_pipe_handle pipe)
 
 	DPRINTFN(8, ("usbd_clear_endpoint_stall\n"));
 
-	/* 
+	/*
 	 * Clearing en endpoint stall resets the enpoint toggle, so
 	 * do the same to the HC toggle.
 	 */
@@ -533,7 +533,7 @@ XXX should we do this?
 	return (err);
 }
 
-usbd_status 
+usbd_status
 usbd_clear_endpoint_stall_async(usbd_pipe_handle pipe)
 {
 	usbd_device_handle dev = pipe->device;
@@ -558,7 +558,7 @@ usbd_clear_endpoint_toggle(usbd_pipe_handle pipe)
 	pipe->methods->cleartoggle(pipe);
 }
 
-usbd_status 
+usbd_status
 usbd_endpoint_count(usbd_interface_handle iface, u_int8_t *count)
 {
 #ifdef DIAGNOSTIC
@@ -571,7 +571,7 @@ usbd_endpoint_count(usbd_interface_handle iface, u_int8_t *count)
 	return (USBD_NORMAL_COMPLETION);
 }
 
-usbd_status 
+usbd_status
 usbd_interface_count(usbd_device_handle dev, u_int8_t *count)
 {
 	if (dev->cdesc == NULL)
@@ -580,7 +580,7 @@ usbd_interface_count(usbd_device_handle dev, u_int8_t *count)
 	return (USBD_NORMAL_COMPLETION);
 }
 
-usbd_status 
+usbd_status
 usbd_interface2device_handle(usbd_interface_handle iface,
 			     usbd_device_handle *dev)
 {
@@ -588,7 +588,7 @@ usbd_interface2device_handle(usbd_interface_handle iface,
 	return (USBD_NORMAL_COMPLETION);
 }
 
-usbd_status 
+usbd_status
 usbd_device2interface_handle(usbd_device_handle dev,
 			     u_int8_t ifaceno, usbd_interface_handle *iface)
 {
@@ -651,7 +651,7 @@ usbd_get_no_alts(usb_config_descriptor_t *cdesc, int ifaceno)
 
 	for (n = 0; p < end; p += d->bLength) {
 		d = (usb_interface_descriptor_t *)p;
-		if (p + d->bLength <= end && 
+		if (p + d->bLength <= end &&
 		    d->bDescriptorType == UDESC_INTERFACE &&
 		    d->bInterfaceNumber == ifaceno)
 			n++;
@@ -696,7 +696,7 @@ usbd_ar_pipe(usbd_pipe_handle pipe)
 	pipe->repeat = 0;
 	pipe->aborting = 1;
 	while ((xfer = SIMPLEQ_FIRST(&pipe->queue)) != NULL) {
-		DPRINTFN(2,("usbd_ar_pipe: pipe=%p xfer=%p (methods=%p)\n", 
+		DPRINTFN(2,("usbd_ar_pipe: pipe=%p xfer=%p (methods=%p)\n",
 			    pipe, xfer, pipe->methods));
 		/* Make the HC abort it (and invoke the callback). */
 		pipe->methods->abort(xfer);
@@ -761,7 +761,7 @@ usb_transfer_complete(usbd_xfer_handle xfer)
 #endif
 		SIMPLEQ_REMOVE_HEAD(&pipe->queue, xfer, next);
 	}
-	DPRINTFN(5,("usb_transfer_complete: repeat=%d new head=%p\n", 
+	DPRINTFN(5,("usb_transfer_complete: repeat=%d new head=%p\n",
 		    repeat, SIMPLEQ_FIRST(&pipe->queue)));
 
 	/* Count completed transfers. */
@@ -809,7 +809,7 @@ usb_insert_transfer(usbd_xfer_handle xfer)
 	usbd_status err;
 	int s;
 
-	DPRINTFN(5,("usb_insert_transfer: pipe=%p running=%d timeout=%d\n", 
+	DPRINTFN(5,("usb_insert_transfer: pipe=%p running=%d timeout=%d\n",
 		    pipe, pipe->running, xfer->timeout));
 	s = splusb();
 	SIMPLEQ_INSERT_TAIL(&pipe->queue, xfer, next);
@@ -869,7 +869,7 @@ usbd_status
 usbd_do_request_flags(usbd_device_handle dev, usb_device_request_t *req,
 		      void *data, u_int16_t flags, int *actlen, u_int32_t timo)
 {
-	return (usbd_do_request_flags_pipe(dev, dev->default_pipe, req, 
+	return (usbd_do_request_flags_pipe(dev, dev->default_pipe, req,
 					   data, flags, actlen, timo));
 }
 
@@ -905,14 +905,14 @@ usbd_do_request_flags_pipe(usbd_device_handle dev, usbd_pipe_handle pipe,
 			 "%02x val=%d index=%d rlen=%d length=%d actlen=%d\n",
 			 dev->address, xfer->request.bmRequestType,
 			 xfer->request.bRequest, UGETW(xfer->request.wValue),
-			 UGETW(xfer->request.wIndex), 
-			 UGETW(xfer->request.wLength), 
+			 UGETW(xfer->request.wIndex),
+			 UGETW(xfer->request.wLength),
 			 xfer->length, xfer->actlen));
 #endif
 	if (actlen != NULL)
 		*actlen = xfer->actlen;
 	if (err == USBD_STALLED) {
-		/* 
+		/*
 		 * The control endpoint has stalled.  Control endpoints
 		 * should not halt, but some may do so anyway so clear
 		 * any halt condition.
@@ -962,11 +962,11 @@ usbd_do_request_async_cb(usbd_xfer_handle xfer, usbd_private_handle priv,
 	if (xfer->actlen > xfer->length)
 		DPRINTF(("usbd_do_request: overrun addr=%d type=0x%02x req=0x"
 			 "%02x val=%d index=%d rlen=%d length=%d actlen=%d\n",
-			 xfer->pipe->device->address, 
+			 xfer->pipe->device->address,
 			 xfer->request.bmRequestType,
 			 xfer->request.bRequest, UGETW(xfer->request.wValue),
-			 UGETW(xfer->request.wIndex), 
-			 UGETW(xfer->request.wLength), 
+			 UGETW(xfer->request.wIndex),
+			 UGETW(xfer->request.wLength),
 			 xfer->length, xfer->actlen));
 #endif
 	usbd_free_xfer(xfer);
@@ -1080,7 +1080,7 @@ int
 usbd_driver_load(module_t mod, int what, void *arg)
 {
 	/* XXX should implement something like a function that removes all generic devices */
- 
+
  	return (0);
 }
 
diff --git a/sys/dev/usb/usbdi.h b/sys/dev/usb/usbdi.h
index 1c25a18911c..fc879569bd2 100644
--- a/sys/dev/usb/usbdi.h
+++ b/sys/dev/usb/usbdi.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usbdi.h,v 1.17 2002/07/09 17:41:02 nate Exp $ */
+/*	$OpenBSD: usbdi.h,v 1.18 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usbdi.h,v 1.53 2001/08/15 00:04:59 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usbdi.h,v 1.18 1999/11/17 22:33:49 n_hibma Exp $	*/
 
@@ -46,7 +46,7 @@ typedef struct usbd_pipe	*usbd_pipe_handle;
 typedef struct usbd_xfer	*usbd_xfer_handle;
 typedef void			*usbd_private_handle;
 
-typedef enum {		/* keep in sync with usbd_status_msgs */ 
+typedef enum {		/* keep in sync with usbd_status_msgs */
 	USBD_NORMAL_COMPLETION = 0, /* must be 0 */
 	USBD_IN_PROGRESS,
 	/* errors */
@@ -138,7 +138,7 @@ usbd_status usbd_do_request(usbd_device_handle pipe, usb_device_request_t *req,
 usbd_status usbd_do_request_async(usbd_device_handle pipe,
 				  usb_device_request_t *req, void *data);
 usbd_status usbd_do_request_flags(usbd_device_handle pipe,
-				  usb_device_request_t *req, 
+				  usb_device_request_t *req,
 				  void *data, u_int16_t flags, int*, u_int32_t);
 usbd_status usbd_do_request_flags_pipe(
 	usbd_device_handle dev, usbd_pipe_handle pipe,
@@ -157,7 +157,7 @@ int usbd_get_interface_altindex(usbd_interface_handle iface);
 usb_interface_descriptor_t *usbd_find_idesc(usb_config_descriptor_t *cd,
 					    int iindex, int ano);
 usb_endpoint_descriptor_t *usbd_find_edesc(usb_config_descriptor_t *cd,
-					   int ifaceidx, int altidx, 
+					   int ifaceidx, int altidx,
 					   int endptidx);
 
 void usbd_dopoll(usbd_interface_handle);
diff --git a/sys/dev/usb/usbdi_util.c b/sys/dev/usb/usbdi_util.c
index ae09e7c919e..196e0a3cb6e 100644
--- a/sys/dev/usb/usbdi_util.c
+++ b/sys/dev/usb/usbdi_util.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usbdi_util.c,v 1.13 2002/05/07 18:29:19 nate Exp $ */
+/*	$OpenBSD: usbdi_util.c,v 1.14 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usbdi_util.c,v 1.35 2001/10/26 17:58:21 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usbdi_util.c,v 1.14 1999/11/17 22:33:50 n_hibma Exp $	*/
 
@@ -82,13 +82,13 @@ usbd_get_desc(usbd_device_handle dev, int type, int index, int len, void *desc)
 }
 
 usbd_status
-usbd_get_config_desc(usbd_device_handle dev, int confidx, 
+usbd_get_config_desc(usbd_device_handle dev, int confidx,
 		     usb_config_descriptor_t *d)
 {
 	usbd_status err;
 
 	DPRINTFN(3,("usbd_get_config_desc: confidx=%d\n", confidx));
-	err = usbd_get_desc(dev, UDESC_CONFIG, confidx, 
+	err = usbd_get_desc(dev, UDESC_CONFIG, confidx,
 			    USB_CONFIG_DESCRIPTOR_SIZE, d);
 	if (err)
 		return (err);
@@ -112,7 +112,7 @@ usbd_status
 usbd_get_device_desc(usbd_device_handle dev, usb_device_descriptor_t *d)
 {
 	DPRINTFN(3,("usbd_get_device_desc:\n"));
-	return (usbd_get_desc(dev, UDESC_DEVICE, 
+	return (usbd_get_desc(dev, UDESC_DEVICE,
 			     0, USB_DEVICE_DESCRIPTOR_SIZE, d));
 }
 
@@ -127,7 +127,7 @@ usbd_get_device_status(usbd_device_handle dev, usb_status_t *st)
 	USETW(req.wIndex, 0);
 	USETW(req.wLength, sizeof(usb_status_t));
 	return (usbd_do_request(dev, &req, st));
-}	
+}
 
 usbd_status
 usbd_get_hub_status(usbd_device_handle dev, usb_hub_status_t *st)
@@ -140,7 +140,7 @@ usbd_get_hub_status(usbd_device_handle dev, usb_hub_status_t *st)
 	USETW(req.wIndex, 0);
 	USETW(req.wLength, sizeof(usb_hub_status_t));
 	return (usbd_do_request(dev, &req, st));
-}	
+}
 
 usbd_status
 usbd_set_address(usbd_device_handle dev, int addr)
@@ -245,7 +245,7 @@ usbd_set_protocol(usbd_interface_handle iface, int report)
 }
 
 usbd_status
-usbd_set_report(usbd_interface_handle iface, int type, int id, void *data, 
+usbd_set_report(usbd_interface_handle iface, int type, int id, void *data,
 		int len)
 {
 	usb_interface_descriptor_t *ifd = usbd_get_interface_descriptor(iface);
@@ -411,7 +411,7 @@ usbd_read_report_desc(usbd_interface_handle ifc, void **descp, int *sizep,
 	return (USBD_NORMAL_COMPLETION);
 }
 
-usbd_status 
+usbd_status
 usbd_get_config(usbd_device_handle dev, u_int8_t *conf)
 {
 	usb_device_request_t req;
@@ -434,7 +434,7 @@ usbd_bulk_transfer_cb(usbd_xfer_handle xfer, usbd_private_handle priv,
 }
 
 usbd_status
-usbd_bulk_transfer(usbd_xfer_handle xfer, usbd_pipe_handle pipe, 
+usbd_bulk_transfer(usbd_xfer_handle xfer, usbd_pipe_handle pipe,
 		   u_int16_t flags, u_int32_t timeout, void *buf,
 		   u_int32_t *size, char *lbl)
 {
@@ -474,11 +474,11 @@ usb_detach_wait(device_ptr_t dv)
 		printf("usb_detach_wait: %s didn't detach\n",
 		        USBDEVPTRNAME(dv));
 	DPRINTF(("usb_detach_wait: %s done\n", USBDEVPTRNAME(dv)));
-}       
+}
 
 void
 usb_detach_wakeup(device_ptr_t dv)
 {
 	DPRINTF(("usb_detach_wakeup: for %s\n", USBDEVPTRNAME(dv)));
 	wakeup(dv);
-}       
+}
diff --git a/sys/dev/usb/usbdi_util.h b/sys/dev/usb/usbdi_util.h
index aef2affe9f7..0e707710a4d 100644
--- a/sys/dev/usb/usbdi_util.h
+++ b/sys/dev/usb/usbdi_util.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usbdi_util.h,v 1.10 2002/05/07 18:29:19 nate Exp $ */
+/*	$OpenBSD: usbdi_util.h,v 1.11 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usbdi_util.h,v 1.23 2001/10/26 17:58:22 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usbdi_util.h,v 1.9 1999/11/17 22:33:50 n_hibma Exp $	*/
 
@@ -39,15 +39,15 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-usbd_status	usbd_get_desc(usbd_device_handle dev, int type, 
+usbd_status	usbd_get_desc(usbd_device_handle dev, int type,
 			      int index, int len, void *desc);
-usbd_status	usbd_get_config_desc(usbd_device_handle, int, 
+usbd_status	usbd_get_config_desc(usbd_device_handle, int,
 				     usb_config_descriptor_t *);
 usbd_status	usbd_get_config_desc_full(usbd_device_handle, int, void *, int);
 usbd_status	usbd_get_device_desc(usbd_device_handle dev,
 				     usb_device_descriptor_t *d);
 usbd_status	usbd_set_address(usbd_device_handle dev, int addr);
-usbd_status	usbd_get_port_status(usbd_device_handle, 
+usbd_status	usbd_get_port_status(usbd_device_handle,
 				     int, usb_port_status_t *);
 usbd_status	usbd_set_hub_feature(usbd_device_handle dev, int);
 usbd_status	usbd_clear_hub_feature(usbd_device_handle, int);
diff --git a/sys/dev/usb/usbdivar.h b/sys/dev/usb/usbdivar.h
index 5bf053ed879..0b1b6d69f30 100644
--- a/sys/dev/usb/usbdivar.h
+++ b/sys/dev/usb/usbdivar.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usbdivar.h,v 1.16 2002/05/07 18:29:19 nate Exp $ */
+/*	$OpenBSD: usbdivar.h,v 1.17 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: usbdivar.h,v 1.63 2001/01/21 19:00:06 augustss Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/usbdivar.h,v 1.11 1999/11/17 22:33:51 n_hibma Exp $	*/
 
@@ -237,9 +237,9 @@ usbd_status	usbd_setup_pipe(usbd_device_handle dev,
 				usbd_interface_handle iface,
 				struct usbd_endpoint *, int,
 				usbd_pipe_handle *pipe);
-usbd_status	usbd_new_device(device_ptr_t parent, 
+usbd_status	usbd_new_device(device_ptr_t parent,
 				usbd_bus_handle bus, int depth,
-				int lowspeed, int port, 
+				int lowspeed, int port,
 				struct usbd_port *);
 void		usbd_remove_device(usbd_device_handle, struct usbd_port *);
 int		usbd_printBCD(char *cp, int bcd);
diff --git a/sys/dev/usb/uscanner.c b/sys/dev/usb/uscanner.c
index 3b0c7546ad4..a057977ba10 100644
--- a/sys/dev/usb/uscanner.c
+++ b/sys/dev/usb/uscanner.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uscanner.c,v 1.10 2002/07/12 12:03:51 todd Exp $ */
+/*	$OpenBSD: uscanner.c,v 1.11 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: uscanner.c,v 1.29 2002/06/18 00:32:30 augustss Exp $	*/
 
 /*
@@ -372,7 +372,7 @@ uscanneropen(dev_t dev, int flag, int mode, usb_proc_ptr p)
 
 	USB_GET_SC_OPEN(uscanner, unit, sc);
 
- 	DPRINTFN(5, ("uscanneropen: flag=%d, mode=%d, unit=%d\n", 
+ 	DPRINTFN(5, ("uscanneropen: flag=%d, mode=%d, unit=%d\n",
 		     flag, mode, unit));
 
 	if (sc->sc_dying)
@@ -676,12 +676,12 @@ uscannerpoll(dev_t dev, int events, usb_proc_ptr p)
 	if (sc->sc_dying)
 		return (EIO);
 
-	/* 
+	/*
 	 * We have no easy way of determining if a read will
 	 * yield any data or a write will happen.
 	 * Pretend they will.
 	 */
-	revents |= events & 
+	revents |= events &
 		   (POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM);
 
 	return (revents);
diff --git a/sys/dev/usb/usscanner.c b/sys/dev/usb/usscanner.c
index c8c7a530c34..8c8ba11d4aa 100644
--- a/sys/dev/usb/usscanner.c
+++ b/sys/dev/usb/usscanner.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usscanner.c,v 1.5 2002/05/07 18:29:19 nate Exp $	*/
+/*	$OpenBSD: usscanner.c,v 1.6 2002/07/25 02:18:11 nate Exp $	*/
 /*	$NetBSD: usscanner.c,v 1.6 2001/01/23 14:04:14 augustss Exp $	*/
 
 /*
@@ -243,7 +243,7 @@ USB_ATTACH(usscanner)
 			sc->sc_out_addr = ed->bEndpointAddress;
 		}
 	}
-	if (sc->sc_in_addr == -1 || sc->sc_intr_addr == -1 || 
+	if (sc->sc_in_addr == -1 || sc->sc_intr_addr == -1 ||
 	    sc->sc_out_addr == -1) {
 		printf("%s: missing endpoint\n", USBDEVNAME(sc->sc_dev));
 		USB_ATTACH_ERROR_RETURN;
@@ -285,7 +285,7 @@ USB_ATTACH(usscanner)
 	}
 
 	/* XXX too big */
-	sc->sc_cmd_buffer = usbd_alloc_buffer(sc->sc_cmd_xfer, 
+	sc->sc_cmd_buffer = usbd_alloc_buffer(sc->sc_cmd_xfer,
 					     USSCANNER_MAX_TRANSFER_SIZE);
 	if (sc->sc_cmd_buffer == NULL) {
 		printf("%s: alloc cmd buffer failed, err=%d\n",
@@ -309,7 +309,7 @@ USB_ATTACH(usscanner)
 		usscanner_cleanup(sc);
 		USB_ATTACH_ERROR_RETURN;
 	}
-	sc->sc_data_buffer = usbd_alloc_buffer(sc->sc_data_xfer, 
+	sc->sc_data_buffer = usbd_alloc_buffer(sc->sc_data_xfer,
 					      USSCANNER_MAX_TRANSFER_SIZE);
 	if (sc->sc_data_buffer == NULL) {
 		printf("%s: alloc data buffer failed, err=%d\n",
@@ -323,7 +323,7 @@ USB_ATTACH(usscanner)
 	 */
 	sc->sc_adapter.scsipi_cmd = usscanner_scsipi_cmd;
 	sc->sc_adapter.scsipi_minphys = usscanner_scsipi_minphys;
-	
+
 	/*
 	 * fill in the prototype scsipi_link.
 	 */
@@ -346,7 +346,7 @@ USB_ATTACH(usscanner)
 	sc->sc_link.scsipi_scsi.max_target = USSCANNER_SCSIID_DEVICE;
 	sc->sc_link.scsipi_scsi.max_lun = 0;
 #endif
-	
+
 	sc->sc_child = config_found(&sc->sc_dev, &sc->sc_link, scsiprint);
 
 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
@@ -462,7 +462,7 @@ usscanner_sense(struct usscanner_softc *sc)
 	sc->sc_state = UAS_SENSECMD;
 	memcpy(sc->sc_cmd_buffer, &sense_cmd, sizeof sense_cmd);
 	usbd_setup_xfer(sc->sc_cmd_xfer, sc->sc_out_pipe, sc, sc->sc_cmd_buffer,
-	    sizeof sense_cmd, USBD_NO_COPY, USSCANNER_TIMEOUT, 
+	    sizeof sense_cmd, USBD_NO_COPY, USSCANNER_TIMEOUT,
 	    usscanner_sensecmd_cb);
 	err = usbd_transfer(sc->sc_cmd_xfer);
 	if (err == USBD_IN_PROGRESS)
@@ -492,7 +492,7 @@ usscanner_intr_cb(usbd_xfer_handle xfer, usbd_private_handle priv,
 	/* XXX what should we do on non-0 status */
 
 	sc->sc_state = UAS_IDLE;
-		
+
 	sc->sc_xs->xs_status |= XS_STS_DONE;
 	s = splbio();
 	scsipi_done(sc->sc_xs);
diff --git a/sys/dev/usb/uvisor.c b/sys/dev/usb/uvisor.c
index 424e7fc1625..f547a35ce82 100644
--- a/sys/dev/usb/uvisor.c
+++ b/sys/dev/usb/uvisor.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uvisor.c,v 1.10 2002/07/09 17:41:02 nate Exp $	*/
+/*	$OpenBSD: uvisor.c,v 1.11 2002/07/25 02:18:11 nate Exp $	*/
 /*	$NetBSD: uvisor.c,v 1.15 2002/06/16 15:01:31 augustss Exp $	*/
 
 /*
@@ -172,7 +172,7 @@ USB_DECLARE_DRIVER(uvisor);
 USB_MATCH(uvisor)
 {
 	USB_MATCH_START(uvisor, uaa);
-	
+
 	if (uaa->iface != NULL)
 		return (UMATCH_NONE);
 
@@ -416,6 +416,6 @@ uvisor_close(void *addr, int portno)
 	USETW(req.wValue, 0);
 	USETW(req.wIndex, 0);
 	USETW(req.wLength, UVISOR_CONNECTION_INFO_SIZE);
-	(void)usbd_do_request_flags(sc->sc_udev, &req, &coninfo, 
+	(void)usbd_do_request_flags(sc->sc_udev, &req, &coninfo,
 		  USBD_SHORT_XFER_OK, &actlen, USBD_DEFAULT_TIMEOUT);
 }
diff --git a/sys/dev/usb/uyap.c b/sys/dev/usb/uyap.c
index ade6503df08..53c1fba9048 100644
--- a/sys/dev/usb/uyap.c
+++ b/sys/dev/usb/uyap.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uyap.c,v 1.4 2002/05/06 05:40:43 nate Exp $ */
+/*	$OpenBSD: uyap.c,v 1.5 2002/07/25 02:18:11 nate Exp $ */
 /*	$NetBSD: uyap.c,v 1.5 2001/11/13 06:24:57 lukem Exp $	*/
 
 /*
@@ -68,7 +68,7 @@ USB_DECLARE_DRIVER(uyap);
 USB_MATCH(uyap)
 {
 	USB_MATCH_START(uyap, uaa);
-	
+
 	if (uaa->iface != NULL)
 		return (UMATCH_NONE);
 
@@ -86,7 +86,7 @@ USB_ATTACH(uyap)
 	usbd_device_handle dev = uaa->device;
 	usbd_status err;
 	char devinfo[1024];
-	
+
 	usbd_devinfo(dev, 0, devinfo);
 	USB_ATTACH_SETUP;
 	printf("%s: %s\n", USBDEVNAME(sc->sc_dev), devinfo);
@@ -98,7 +98,7 @@ USB_ATTACH(uyap)
 		       USBDEVNAME(sc->sc_dev), usbd_errstr(err));
 		USB_ATTACH_ERROR_RETURN;
 	}
-	
+
 	printf("%s: firmware download complete, disconnecting.\n",
 	       USBDEVNAME(sc->sc_dev));
 	USB_ATTACH_SUCCESS_RETURN;
-- 
cgit v1.2.3