From a4aa20bbe39a4ed79d63cfde14fc8c13f34abe59 Mon Sep 17 00:00:00 2001
From: Christopher Pascoe <pascoe@cvs.openbsd.org>
Date: Sun, 18 Mar 2007 06:00:46 +0000
Subject: Wait the stable power delay on a USB hub only once per hub (not per
 port), and defer the delay for root hubs until the host controller event
 thread starts, permitting some concurrency.  Speeds up the boot process
 dramatically when you have lots of host controllers.

ok dlg@
---
 sys/dev/usb/uhub.c | 8 +++++---
 sys/dev/usb/usb.c  | 8 +++++++-
 2 files changed, 12 insertions(+), 4 deletions(-)

(limited to 'sys/dev')

diff --git a/sys/dev/usb/uhub.c b/sys/dev/usb/uhub.c
index 035e20c94d1..056158408e2 100644
--- a/sys/dev/usb/uhub.c
+++ b/sys/dev/usb/uhub.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: uhub.c,v 1.34 2006/06/26 19:12:38 mjc Exp $ */
+/*	$OpenBSD: uhub.c,v 1.35 2007/03/18 06:00:45 pascoe Exp $ */
 /*	$NetBSD: uhub.c,v 1.64 2003/02/08 03:32:51 ichiro Exp $	*/
 /*	$FreeBSD: src/sys/dev/usb/uhub.c,v 1.18 1999/11/17 22:33:43 n_hibma Exp $	*/
 
@@ -338,10 +338,12 @@ USB_ATTACH(uhub)
 			       USBDEVNAME(sc->sc_dev), port,
 			       usbd_errstr(err));
 		DPRINTF(("usb_init_port: turn on port %d power\n", port));
-		/* Wait for stable power. */
-		usbd_delay_ms(dev, pwrdly);
 	}
 
+	/* Wait for stable power.  Root hubs delay in their event thread. */
+	if (dev->powersrc->parent != NULL)
+		usbd_delay_ms(dev, pwrdly);
+
 	/* The usual exploration will finish the setup. */
 
 	sc->sc_running = 1;
diff --git a/sys/dev/usb/usb.c b/sys/dev/usb/usb.c
index ed01a21d29b..c8256f255dd 100644
--- a/sys/dev/usb/usb.c
+++ b/sys/dev/usb/usb.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: usb.c,v 1.35 2006/11/01 03:37:24 tedu Exp $	*/
+/*	$OpenBSD: usb.c,v 1.36 2007/03/18 06:00:45 pascoe Exp $	*/
 /*	$NetBSD: usb.c,v 1.77 2003/01/01 00:10:26 thorpej Exp $	*/
 
 /*
@@ -304,9 +304,15 @@ void
 usb_event_thread(void *arg)
 {
 	struct usb_softc *sc = arg;
+	int pwrdly;
 
 	DPRINTF(("usb_event_thread: start\n"));
 
+	/* Wait for power to come good. */
+	pwrdly = sc->sc_bus->root_hub->hub->hubdesc.bPwrOn2PwrGood * 
+	    UHD_PWRON_FACTOR + USB_EXTRA_POWER_UP_TIME;
+	usb_delay_ms(sc->sc_bus, pwrdly);
+
 	/* USB1 threads wait for USB2 threads to finish their first probe. */
 	while (sc->sc_bus->usbrev != USBREV_2_0 && threads_pending)
 		(void)tsleep((void *)&threads_pending, PWAIT, "config", 0);
-- 
cgit v1.2.3