From f53227a1e62ba02f3aeb584db60639063ba647af Mon Sep 17 00:00:00 2001
From: "Federico G. Schwindt" <fgsch@cvs.openbsd.org>
Date: Mon, 29 May 2000 17:08:52 +0000
Subject: preparing for AX88190 support; from NetBSD.

---
 sys/dev/ic/dp8390.c    | 11 +++++++++--
 sys/dev/ic/dp8390reg.h |  9 +++++++--
 sys/dev/ic/dp8390var.h |  9 ++++++++-
 3 files changed, 24 insertions(+), 5 deletions(-)

(limited to 'sys/dev')

diff --git a/sys/dev/ic/dp8390.c b/sys/dev/ic/dp8390.c
index 62c58b19280..f3e717fb121 100644
--- a/sys/dev/ic/dp8390.c
+++ b/sys/dev/ic/dp8390.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: dp8390.c,v 1.7 2000/04/19 21:40:45 fgsch Exp $	*/
+/*	$OpenBSD: dp8390.c,v 1.8 2000/05/29 17:08:51 fgsch Exp $	*/
 /*	$NetBSD: dp8390.c,v 1.13 1998/07/05 06:49:11 jonathan Exp $	*/
 
 /*
@@ -349,7 +349,7 @@ dp8390_init(sc)
 	    sc->cr_proto | ED_CR_PAGE_0 | ED_CR_STP);
 
 	/* Accept broadcast and multicast packets by default. */
-	i = ED_RCR_AB | ED_RCR_AM;
+	i = ED_RCR_AB | ED_RCR_AM | sc->rcr_proto;
 	if (ifp->if_flags & IFF_PROMISC) {
 		/*
 		 * Set promiscuous mode.  Multicast filter was set earlier so
@@ -640,6 +640,13 @@ dp8390_intr(arg)
 		 */
 		NIC_PUT(regt, regh, ED_P0_ISR, isr);
 
+		/* Work around for AX88190 bug */
+		if ((sc->sc_flags & DP8390_DO_AX88190_WORKAROUND) != 0)
+			while ((NIC_GET(regt, regh, ED_P0_ISR) & isr) != 0) {
+				NIC_PUT(regt, regh, ED_P0_ISR, 0);
+				NIC_PUT(regt, regh, ED_P0_ISR, isr);
+			}
+
 		/*
 		 * Handle transmitter interrupts.  Handle these first because
 		 * the receiver will reset the board under some conditions.
diff --git a/sys/dev/ic/dp8390reg.h b/sys/dev/ic/dp8390reg.h
index 3917d88297a..daaeccb7aeb 100644
--- a/sys/dev/ic/dp8390reg.h
+++ b/sys/dev/ic/dp8390reg.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: dp8390reg.h,v 1.7 1998/11/06 06:32:14 fgsch Exp $	*/
+/*	$OpenBSD: dp8390reg.h,v 1.8 2000/05/29 17:08:51 fgsch Exp $	*/
 /*	$NetBSD: dp8390reg.h,v 1.3 1997/04/29 04:32:08 scottr Exp $	*/
 
 /*
@@ -461,7 +461,12 @@
 #define ED_RCR_MON	0x20
 
 /*
- * Bits 6 and 7 are unused/reserved.
+ * INTT: Interrupt Trigger Mode.  Must be set if AX88190.
+ */
+#define ED_RCR_INTT	0x40
+
+/*
+ * Bit 7 is unused/reserved.
  */
 
 /*
diff --git a/sys/dev/ic/dp8390var.h b/sys/dev/ic/dp8390var.h
index a5c895b10e7..00792026afa 100644
--- a/sys/dev/ic/dp8390var.h
+++ b/sys/dev/ic/dp8390var.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: dp8390var.h,v 1.2 2000/04/19 21:52:38 fgsch Exp $	*/
+/*	$OpenBSD: dp8390var.h,v 1.3 2000/05/29 17:08:51 fgsch Exp $	*/
 /*	$NetBSD: dp8390var.h,v 1.8 1998/08/12 07:19:09 scottr Exp $	*/
 
 /*
@@ -37,6 +37,7 @@ struct dp8390_softc {
 	int	is790;		/* NIC is a 790 */
 
 	u_int8_t cr_proto;	/* values always set in CR */
+	u_int8_t rcr_proto;	/* values always set in RCR */
 	u_int8_t dcr_reg;	/* override DCR iff LS is set */
 
 	int	mem_start;	/* offset of NIC memory */
@@ -116,6 +117,12 @@ struct dp8390_softc {
  */
 #define DP8390_FORCE_PIO		0x0010
 
+/*
+ * The chip is ASIX AX88190 and needs work around.
+ */
+#define DP8390_DO_AX88190_WORKAROUND	0x0020
+
+
 /*
  * NIC register access macros
  */
-- 
cgit v1.2.3