From 284201d8c10822c1d342c2a286b0a219d4050235 Mon Sep 17 00:00:00 2001 From: Dale Rahn Date: Fri, 6 Sep 2002 13:56:52 +0000 Subject: Serial console support for macppc. Serial console will work if the modem has been replaced with a serial port adapter on any machine that has a real serial port internally. This will also power on the internal modem for keylargo based machines (tested on original PBG4) when the serial port is open. ok miod@ --- sys/arch/macppc/conf/files.macppc | 6 +- sys/arch/macppc/dev/z8530reg.h | 451 ++++++++++ sys/arch/macppc/dev/z8530sc.c | 357 ++++++++ sys/arch/macppc/dev/z8530sc.h | 158 ++++ sys/arch/macppc/dev/z8530tty.c | 1642 ++++++++++++++++++++++++++++++++++ sys/arch/macppc/dev/zs.c | 410 ++++++++- sys/arch/macppc/include/z8530var.h | 46 +- sys/arch/macppc/macppc/conf.c | 6 +- sys/arch/macppc/macppc/ofw_machdep.c | 17 +- sys/arch/macppc/pci/macobio.c | 39 +- 10 files changed, 3058 insertions(+), 74 deletions(-) create mode 100644 sys/arch/macppc/dev/z8530reg.h create mode 100644 sys/arch/macppc/dev/z8530sc.c create mode 100644 sys/arch/macppc/dev/z8530sc.h create mode 100644 sys/arch/macppc/dev/z8530tty.c (limited to 'sys') diff --git a/sys/arch/macppc/conf/files.macppc b/sys/arch/macppc/conf/files.macppc index 6149a487c3c..bb4f34bcfce 100644 --- a/sys/arch/macppc/conf/files.macppc +++ b/sys/arch/macppc/conf/files.macppc @@ -1,4 +1,4 @@ -# $OpenBSD: files.macppc,v 1.13 2002/07/23 17:53:24 drahn Exp $ +# $OpenBSD: files.macppc,v 1.14 2002/09/06 13:56:51 drahn Exp $ # # macppc-specific configuration info @@ -136,11 +136,11 @@ file arch/macppc/dev/openpic.c openpic device zsc {channel = -1} attach zsc at macobio file arch/macppc/dev/zs.c zsc needs-flag -file dev/ic/z8530sc.c zsc +file arch/macppc/dev/z8530sc.c zsc device zstty: tty attach zstty at zsc -file dev/ic/z8530tty.c zstty needs-flag +file arch/macppc/dev/z8530tty.c zstty needs-flag device adb {} attach adb at macobio diff --git a/sys/arch/macppc/dev/z8530reg.h b/sys/arch/macppc/dev/z8530reg.h new file mode 100644 index 00000000000..9b4bd925caf --- /dev/null +++ b/sys/arch/macppc/dev/z8530reg.h @@ -0,0 +1,451 @@ +/* $OpenBSD: z8530reg.h,v 1.1 2002/09/06 13:56:51 drahn Exp $ */ +/* $NetBSD: z8530reg.h,v 1.9 1998/07/31 05:08:38 wrstuden Exp $ */ + +/* + * Copyright (c) 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * This software was developed by the Computer Systems Engineering group + * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and + * contributed to Berkeley. + * + * All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Lawrence Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)zsreg.h 8.1 (Berkeley) 6/11/93 + */ + +/* + * Zilog SCC registers, as implemented on the Sun-4c. + * + * Each Z8530 implements two channels (called `a' and `b'). + * + * The damnable chip was designed to fit on Z80 I/O ports, and thus + * has everything multiplexed out the wazoo. We have to select + * a register, then read or write the register, and so on. Worse, + * the parameter bits are scattered all over the register space. + * This thing is full of `miscellaneous' control registers. + * + * Worse yet, the registers have incompatible functions on read + * and write operations. We describe the registers below according + * to whether they are `read registers' (RR) or `write registers' (WR). + * As if this were not enough, some of the channel B status bits show + * up in channel A, and vice versa. The blasted thing shares write + * registers 2 and 9 across both channels, and reads registers 2 and 3 + * differently for the two channels. We can, however, ignore this much + * of the time. + * + * This file also includes flags for the Z85C30 and Z85230 enhanced scc. + * The CMOS 8530 includes extra SDLC functionality, and is used in a + * number of Macs (often in the Z85C80, an 85C30 combined w/ a SCSI + * controller). -wrs + * + * Some of the names in this files were chosen to make the hsis driver + * work unchanged (which means that they will match some in SunOS). + * + * `S.C.' stands for Special Condition, which is any of these: + * receiver overrun (aka silo overflow) + * framing error (missing stop bit, etc) + * end of frame (in synchronous modes) + * parity error (when `parity error is S.C.' is set) + * + * Registers with only a single `numeric value' get a name. + * Other registers hold bits and are only numbered; the bit + * definitions imply the register number (see below). + * + * We never use the receive and transmit data registers as + * indirects (choosing instead the zc_data register), so they + * are not defined here. + */ +#define ZSRR_IVEC 2 /* interrupt vector (channel 0) */ +#define ZSRR_IPEND 3 /* interrupt pending (ch. 0 only) */ +#define ZSRR_TXSYNC 6 /* sync transmit char (monosync mode) */ +#define ZSRR_RXSYNC 7 /* sync receive char (monosync mode) */ +#define ZSRR_SYNCLO 6 /* sync low byte (bisync mode) */ +#define ZSRR_SYNCHI 7 /* sync high byte (bisync mode) */ +#define ZSRR_SDLC_ADDR 6 /* SDLC address (SDLC mode) */ +#define ZSRR_SDLC_FLAG 7 /* SDLC flag 0x7E (SDLC mode) */ +#define ZSRR_BAUDLO 12 /* baud rate generator (low half) */ +#define ZSRR_BAUDHI 13 /* baud rate generator (high half) */ +#define ZSRR_ENHANCED 14 /* read address of WR7' - yes, it's not 7!*/ + +#define ZSWR_IVEC 2 /* interrupt vector (shared) */ +#define ZSWR_TXSYNC 6 /* sync transmit char (monosync mode) */ +#define ZSWR_RXSYNC 7 /* sync receive char (monosync mode) */ +#define ZSWR_SYNCLO 6 /* sync low byte (bisync mode) */ +#define ZSWR_SYNCHI 7 /* sync high byte (bisync mode) */ +#define ZSWR_SDLC_ADDR 6 /* SDLC address (SDLC mode) */ +#define ZSWR_SDLC_FLAG 7 /* SDLC flag 0x7E (SDLC mode) */ +#define ZSWR_BAUDLO 12 /* baud rate generator (low half) */ +#define ZSWR_BAUDHI 13 /* baud rate generator (high half) */ +#define ZSWR_ENHANCED 7 /* write address of WR7' */ + +/* + * Registers 0 through 7 may be written with any one of the 8 command + * modifiers, and/or any one of the 4 reset modifiers, defined below. + * To write registers 8 through 15, however, the command modifier must + * always be `point high'. Rather than track this bizzareness all over + * the driver, we try to avoid using any modifiers, ever (but they are + * defined here if you want them). + */ +#define ZSM_RESET_TXUEOM 0xc0 /* reset xmit underrun / eom latch */ +#define ZSM_RESET_TXCRC 0x80 /* reset xmit crc generator */ +#define ZSM_RESET_RXCRC 0x40 /* reset recv crc checker */ +#define ZSM_NULL 0x00 /* nothing special */ + +#define ZSM_RESET_IUS 0x38 /* reset interrupt under service */ +#define ZSM_RESET_ERR 0x30 /* reset error cond */ +#define ZSM_RESET_TXINT 0x28 /* reset xmit interrupt pending */ +#define ZSM_EI_NEXTRXC 0x20 /* enable int. on next rcvd char */ +#define ZSM_SEND_ABORT 0x18 /* send abort (SDLC) */ +#define ZSM_RESET_STINT 0x10 /* reset external/status interrupt */ +#define ZSM_POINTHIGH 0x08 /* `point high' (use r8-r15) */ +#define ZSM_NULL 0x00 /* nothing special */ + +/* + * Commands for Write Register 0 (`Command Register'). + * These are just the command modifiers or'ed with register number 0 + * (which of course equals the command modifier). + */ +#define ZSWR0_RESET_EOM ZSM_RESET_TXUEOM +#define ZSWR0_RESET_TXCRC ZSM_RESET_TXCRC +#define ZSWR0_RESET_RXCRC ZSM_RESET_RXCRC +#define ZSWR0_CLR_INTR ZSM_RESET_IUS +#define ZSWR0_RESET_ERRORS ZSM_RESET_ERR +#define ZSWR0_EI_NEXTRXC ZSM_EI_NEXTRXC +#define ZSWR0_SEND_ABORT ZSM_SEND_ABORT +#define ZSWR0_RESET_STATUS ZSM_RESET_STINT +#define ZSWR0_RESET_TXINT ZSM_RESET_TXINT + +/* + * Bits in Write Register 1 (`Transmit/Receive Interrupt and Data + * Transfer Mode Definition'). Note that bits 3 and 4 are taken together + * as a single unit, and bits 5 and 6 are useful only if bit 7 is set. + */ +#define ZSWR1_REQ_WAIT 0x80 /* WAIT*-REQ* pin gives WAIT* */ +#define ZSWR1_REQ_REQ 0xc0 /* WAIT*-REQ* pin gives REQ* */ +#define ZSWR1_REQ_TX 0x00 /* WAIT*-REQ* pin follows xmit buf */ +#define ZSWR1_REQ_RX 0x20 /* WAIT*-REQ* pin follows recv buf */ + +#define ZSWR1_RIE_NONE 0x00 /* disable rxint entirely */ +#define ZSWR1_RIE_FIRST 0x08 /* rxint on first char & on S.C. */ +#define ZSWR1_RIE 0x10 /* rxint per char & on S.C. */ +#define ZSWR1_RIE_SPECIAL_ONLY 0x18 /* rxint on S.C. only */ + +#define ZSWR1_PE_SC 0x04 /* parity error is special condition */ +#define ZSWR1_TIE 0x02 /* transmit interrupt enable */ +#define ZSWR1_SIE 0x01 /* external/status interrupt enable */ + +#define ZSWR1_IMASK 0x1F /* mask of all itr. enable bits. */ + +/* HSIS compat */ +#define ZSWR1_REQ_ENABLE (ZSWR1_REQ_WAIT | ZSWR1_REQ_TX) + +/* + * Bits in Write Register 3 (`Receive Parameters and Control'). + * Bits 7 and 6 are taken as a unit. Note that the receive bits + * per character ordering is insane. + * + * Here `hardware flow control' means CTS enables the transmitter + * and DCD enables the receiver. The latter is neither interesting + * nor useful, and gets in our way, making it almost unusable. + */ +#define ZSWR3_RX_5 0x00 /* receive 5 bits per char */ +#define ZSWR3_RX_7 0x40 /* receive 7 bits per char */ +#define ZSWR3_RX_6 0x80 /* receive 6 bits per char */ +#define ZSWR3_RX_8 0xc0 /* receive 8 bits per char */ +#define ZSWR3_RXSIZE 0xc0 /* receive char size mask */ + +#define ZSWR3_HFC 0x20 /* hardware flow control */ +#define ZSWR3_HUNT 0x10 /* enter hunt mode */ +#define ZSWR3_RXCRC_ENABLE 0x08 /* enable recv crc calculation */ +#define ZSWR3_ADDR_SEARCH_MODE 0x04 /* address search mode (SDLC only) */ +#define ZSWR3_SDLC_SHORT_ADDR 0x02 /* short address mode (SDLC only) */ +#define ZSWR3_SYNC_LOAD_INH 0x02 /* sync character load inhibit */ +#define ZSWR3_RX_ENABLE 0x01 /* receiver enable */ + +/* + * Bits in Write Register 4 (`Transmit/Receive Miscellaneous Parameters + * and Modes'). Bits 7&6, 5&4, and 3&2 are taken as units. + */ +#define ZSWR4_CLK_X1 0x00 /* clock divisor = 1 */ +#define ZSWR4_CLK_X16 0x40 /* clock divisor = 16 */ +#define ZSWR4_CLK_X32 0x80 /* clock divisor = 32 */ +#define ZSWR4_CLK_X64 0xc0 /* clock divisor = 64 */ +#define ZSWR4_CLK_MASK 0xc0 /* clock divisor mask */ + +#define ZSWR4_MONOSYNC 0x00 /* 8 bit sync char (sync only) */ +#define ZSWR4_BISYNC 0x10 /* 16 bit sync char (sync only) */ +#define ZSWR4_SDLC 0x20 /* SDLC mode */ +#define ZSWR4_EXTSYNC 0x30 /* external sync mode */ +#define ZSWR4_SYNC_MASK 0x30 /* sync mode bit mask */ + +#define ZSWR4_SYNCMODE 0x00 /* no stop bit (sync mode only) */ +#define ZSWR4_ONESB 0x04 /* 1 stop bit */ +#define ZSWR4_1P5SB 0x08 /* 1.5 stop bits (clk cannot be 1x) */ +#define ZSWR4_TWOSB 0x0c /* 2 stop bits */ +#define ZSWR4_SBMASK 0x0c /* mask of all stop bits */ + +#define ZSWR4_EVENP 0x02 /* check for even parity */ +#define ZSWR4_PARENB 0x01 /* enable parity checking */ +#define ZSWR4_PARMASK 0x03 /* mask of all parity bits */ + +/* + * Bits in Write Register 5 (`Transmit Parameter and Controls'). + * Bits 6 and 5 are taken as a unit; the ordering is, as with RX + * bits per char, not sensible. + */ +#define ZSWR5_DTR 0x80 /* assert (set to -12V) DTR */ + +#define ZSWR5_TX_5 0x00 /* transmit 5 or fewer bits */ +#define ZSWR5_TX_7 0x20 /* transmit 7 bits */ +#define ZSWR5_TX_6 0x40 /* transmit 6 bits */ +#define ZSWR5_TX_8 0x60 /* transmit 8 bits */ +#define ZSWR5_TXSIZE 0x60 /* transmit char size mask */ + +#define ZSWR5_BREAK 0x10 /* send break (continuous 0s) */ +#define ZSWR5_TX_ENABLE 0x08 /* enable transmitter */ +#define ZSWR5_CRC16 0x04 /* use CRC16 (off => use SDLC) */ +#define ZSWR5_RTS 0x02 /* assert RTS */ +#define ZSWR5_TXCRC_ENABLE 0x01 /* enable xmit crc calculation */ + +#ifdef not_done_here +/* + * Bits in Write Register 7 when the chip is in SDLC mode. + */ +#define ZSWR7_SDLCFLAG 0x7e /* this value makes SDLC mode work */ +#endif + +/* + * Bits in Write Register 7' (ZSWR_ENHANCED above). This register is + * only available on the 85230. Dispite the fact it contains flags + * and not a single value, the register was named as it is read + * via RR14. Weird. + */ + /* 0x80 unused */ +#define ZSWR7P_EXTEND_READ 0x40 /* modify read map; make most regs readable */ +#define ZSWR7P_TX_FIFO 0x20 /* change level for Tx FIFO empty int */ +#define ZSWR7P_DTR_TIME 0x10 /* modifies deact. speed of /DTR//REQ */ +#define ZSWR7P_RX_FIFO 0x08 /* Rx FIFO int on 1/2 full? */ +#define ZSWR7P_RTS_DEACT 0x04 /* automatically deassert RTS */ +#define ZSWR7P_AUTO_EOM_RESET 0x02 /* automatically reset EMO/Tx Underrun */ +#define ZSWR7P_AUTO_TX_FLAG 0x01 /* Auto send SDLC flag at transmit start */ + +/* + * Bits in Write Register 9 (`Master Interrupt Control'). Bits 7 & 6 + * are taken as a unit and indicate the type of reset; 00 means no reset + * (and is not defined here). + */ +#define ZSWR9_HARD_RESET 0xc0 /* force hardware reset */ +#define ZSWR9_A_RESET 0x80 /* reset channel A (0) */ +#define ZSWR9_B_RESET 0x40 /* reset channel B (1) */ +#define ZSWR9_SOFT_INTAC 0x20 /* Not in NMOS version */ + +#define ZSWR9_STATUS_HIGH 0x10 /* status in high bits of intr vec */ +#define ZSWR9_MASTER_IE 0x08 /* master interrupt enable */ +#define ZSWR9_DLC 0x04 /* disable lower chain */ +#define ZSWR9_NO_VECTOR 0x02 /* no vector */ +#define ZSWR9_VECTOR_INCL_STAT 0x01 /* vector includes status */ + +/* + * Bits in Write Register 10 (`Miscellaneous Transmitter/Receiver Control + * Bits'). Bits 6 & 5 are taken as a unit, and some of the bits are + * meaningful only in certain modes. Bleah. + */ +#define ZSWR10_PRESET_ONES 0x80 /* preset CRC to all 1 (else all 0) */ + +#define ZSWR10_NRZ 0x00 /* NRZ encoding */ +#define ZSWR10_NRZI 0x20 /* NRZI encoding */ +#define ZSWR10_FM1 0x40 /* FM1 encoding */ +#define ZSWR10_FM0 0x60 /* FM0 encoding */ + +#define ZSWR10_GA_ON_POLL 0x10 /* go active on poll (loop mode) */ +#define ZSWR10_MARK_IDLE 0x08 /* all 1s (vs flag) when idle (SDLC) */ +#define ZSWR10_ABORT_ON_UNDERRUN 0x4 /* abort on xmit underrun (SDLC) */ +#define ZSWR10_LOOP_MODE 0x02 /* loop mode (SDLC) */ +#define ZSWR10_6_BIT_SYNC 0x01 /* 6 bits per sync char (sync modes) */ + +/* + * Bits in Write Register 11 (`Clock Mode Control'). Bits 6&5, 4&3, and + * 1&0 are taken as units. Various bits depend on other bits in complex + * ways; see the Zilog manual. + */ +#define ZSWR11_XTAL 0x80 /* have xtal between RTxC* and SYNC* */ + /* (else have TTL oscil. on RTxC*) */ +#define ZSWR11_RXCLK_RTXC 0x00 /* recv clock taken from RTxC* pin */ +#define ZSWR11_RXCLK_TRXC 0x20 /* recv clock taken from TRxC* pin */ +#define ZSWR11_RXCLK_BAUD 0x40 /* recv clock taken from BRG */ +#define ZSWR11_RXCLK_DPLL 0x60 /* recv clock taken from DPLL */ + +#define ZSWR11_TXCLK_RTXC 0x00 /* xmit clock taken from RTxC* pin */ +#define ZSWR11_TXCLK_TRXC 0x08 /* xmit clock taken from TRxC* pin */ +#define ZSWR11_TXCLK_BAUD 0x10 /* xmit clock taken from BRG */ +#define ZSWR11_TXCLK_DPLL 0x18 /* xmit clock taken from DPLL */ + +#define ZSWR11_TRXC_OUT_ENA 0x04 /* TRxC* pin will be an output */ + /* (unless it is being used above) */ +#define ZSWR11_TRXC_XTAL 0x00 /* TRxC output from xtal oscillator */ +#define ZSWR11_TRXC_XMIT 0x01 /* TRxC output from xmit clock */ +#define ZSWR11_TRXC_BAUD 0x02 /* TRxC output from BRG */ +#define ZSWR11_TRXC_DPLL 0x03 /* TRxC output from DPLL */ + +/* + * Formula for Write Registers 12 and 13 (`Lower Byte of Baud Rate + * Generator Time Constant' and `Upper Byte of ...'). Inputs: + * + * f BRG input clock frequency (in Hz) AFTER division + * by 1, 16, 32, or 64 (per clock divisor in WR4) + * bps desired rate in bits per second (9600, etc) + * + * We want + * + * f + * ----- + 0.5 - 2 + * 2 bps + * + * rounded down to an integer. This can be computed entirely + * in integer arithemtic as: + * + * f + bps + * ------- - 2 + * 2 bps + */ +#define BPS_TO_TCONST(f, bps) ((((f) + (bps)) / (2 * (bps))) - 2) + +/* inverse of above: given a BRG Time Constant, return Bits Per Second */ +#define TCONST_TO_BPS(f, tc) ((f) / 2 / ((tc) + 2)) + +/* + * Bits in Write Register 14 (`Miscellaneous Control Bits'). + * Bits 7 through 5 are taken as a unit and make up a `DPLL command'. + */ +#define ZSWR14_DPLL_NOOP 0x00 /* leave DPLL alone */ +#define ZSWR14_DPLL_SEARCH 0x20 /* enter search mode */ +#define ZSWR14_DPLL_RESET_CM 0x40 /* reset `clock missing' in RR10 */ +#define ZSWR14_DPLL_DISABLE 0x60 /* disable DPLL (continuous search) */ +#define ZSWR14_DPLL_SRC_BAUD 0x80 /* set DPLL src = BRG */ +#define ZSWR14_DPLL_SRC_RTXC 0xa0 /* set DPLL src = RTxC* or xtal osc */ +#define ZSWR14_DPLL_FM 0xc0 /* operate in FM mode */ +#define ZSWR14_DPLL_NRZI 0xe0 /* operate in NRZI mode */ + +#define ZSWR14_LOCAL_LOOPBACK 0x10 /* set local loopback mode */ +#define ZSWR14_AUTO_ECHO 0x08 /* set auto echo mode */ +#define ZSWR14_DTR_REQ 0x04 /* DTR* / REQ* pin gives REQ* */ +#define ZSWR14_BAUD_FROM_PCLK 0x02 /* BRG clock taken from PCLK */ + /* (else from RTxC* pin or xtal osc) */ +#define ZSWR14_BAUD_ENA 0x01 /* enable BRG countdown */ + +/* + * Bits in Write Register 15 (`External/Status Interrupt Control'). + * Most of these cause status interrupts whenever the corresponding + * bit or pin changes state (i.e., any rising or falling edge). + * + * NOTE: ZSWR15_SDLC_FIFO & ZSWR15_ENABLE_ENHANCED should not be + * set on an NMOS 8530. Also, ZSWR15_ENABLE_ENHANCED is only + * available on the 85230. + */ +#define ZSWR15_BREAK_IE 0x80 /* enable break/abort status int */ +#define ZSWR15_TXUEOM_IE 0x40 /* enable TX underrun/EOM status int */ +#define ZSWR15_CTS_IE 0x20 /* enable CTS* pin status int */ +#define ZSWR15_SYNCHUNT_IE 0x10 /* enable SYNC* pin/hunt status int */ +#define ZSWR15_DCD_IE 0x08 /* enable DCD* pin status int */ +#define ZSWR15_SDLC_FIFO 0x04 /* enable SDLC FIFO enhancements */ +#define ZSWR15_ZERO_COUNT_IE 0x02 /* enable BRG-counter = 0 status int */ +#define ZSWR15_ENABLE_ENHANCED 0x01 /* enable writing WR7' at reg 7 */ + +/* + * Bits in Read Register 0 (`Transmit/Receive Buffer Status and External + * Status'). + */ +#define ZSRR0_BREAK 0x80 /* break/abort detected */ +#define ZSRR0_TXUNDER 0x40 /* transmit underrun/EOM (sync) */ +#define ZSRR0_CTS 0x20 /* clear to send */ +#define ZSRR0_SYNC_HUNT 0x10 /* sync/hunt (sync mode) */ +#define ZSRR0_DCD 0x08 /* data carrier detect */ +#define ZSRR0_TX_READY 0x04 /* transmit buffer empty */ +#define ZSRR0_ZERO_COUNT 0x02 /* zero count in baud clock */ +#define ZSRR0_RX_READY 0x01 /* received character ready */ + +/* + * Bits in Read Register 1 (the Zilog book does not name this one). + */ +#define ZSRR1_EOF 0x80 /* end of frame (SDLC mode) */ +#define ZSRR1_FE 0x40 /* CRC/framing error */ +#define ZSRR1_DO 0x20 /* data (receiver) overrun */ +#define ZSRR1_PE 0x10 /* parity error */ +#define ZSRR1_RC0 0x08 /* residue code 0 (SDLC mode) */ +#define ZSRR1_RC1 0x04 /* residue code 1 (SDLC mode) */ +#define ZSRR1_RC2 0x02 /* residue code 2 (SDLC mode) */ +#define ZSRR1_ALL_SENT 0x01 /* all chars out of xmitter (async) */ + +/* + * Read Register 2 in B channel contains status bits if VECTOR_INCL_STAT + * is set. + */ + +/* + * Bits in Read Register 3 (`Interrupt Pending'). Only channel A + * has an RR3. + */ + /* 0x80 unused, returned as 0 */ + /* 0x40 unused, returned as 0 */ +#define ZSRR3_IP_A_RX 0x20 /* channel A recv int pending */ +#define ZSRR3_IP_A_TX 0x10 /* channel A xmit int pending */ +#define ZSRR3_IP_A_STAT 0x08 /* channel A status int pending */ +#define ZSRR3_IP_B_RX 0x04 /* channel B recv int pending */ +#define ZSRR3_IP_B_TX 0x02 /* channel B xmit int pending */ +#define ZSRR3_IP_B_STAT 0x01 /* channel B status int pending */ + +/* + * Bits in Read Register 10 (`contains some miscellaneous status bits'). + */ +#define ZSRR10_1_CLOCK_MISSING 0x80 /* 1 clock edge missing (FM mode) */ +#define ZSRR10_2_CLOCKS_MISSING 0x40 /* 2 clock edges missing (FM mode) */ + /* 0x20 unused */ +#define ZSRR10_LOOP_SENDING 0x10 /* xmitter controls loop (SDLC loop) */ + /* 0x08 unused */ + /* 0x04 unused */ +#define ZSRR10_ON_LOOP 0x02 /* SCC is on loop (SDLC/X.21 modes) */ + +/* + * Bits in Read Register 15. This register is one of the few that + * simply reads back the corresponding Write Register. + */ +#define ZSRR15_BREAK_IE 0x80 /* break/abort status int enable */ +#define ZSRR15_TXUEOM_IE 0x40 /* TX underrun/EOM status int enable */ +#define ZSRR15_CTS_IE 0x20 /* CTS* pin status int enable */ +#define ZSRR15_SYNCHUNT_IE 0x10 /* SYNC* pin/hunt status int enable */ +#define ZSRR15_DCD_IE 0x08 /* DCD* pin status int enable */ + /* 0x04 unused, returned as zero */ +#define ZSRR15_ZERO_COUNT_IE 0x02 /* BRG-counter = 0 status int enable */ + /* 0x01 unused, returned as zero */ diff --git a/sys/arch/macppc/dev/z8530sc.c b/sys/arch/macppc/dev/z8530sc.c new file mode 100644 index 00000000000..96de093e249 --- /dev/null +++ b/sys/arch/macppc/dev/z8530sc.c @@ -0,0 +1,357 @@ +/* $OpenBSD: z8530sc.c,v 1.1 2002/09/06 13:56:51 drahn Exp $ */ +/* $NetBSD: z8530sc.c,v 1.4 1996/05/17 19:30:34 gwr Exp $ */ + +/* + * Copyright (c) 1994 Gordon W. Ross + * Copyright (c) 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * This software was developed by the Computer Systems Engineering group + * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and + * contributed to Berkeley. + * + * All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Lawrence Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)zs.c 8.1 (Berkeley) 7/19/93 + */ + +/* + * Zilog Z8530 Dual UART driver (common part) + * + * This file contains the machine-independent parts of the + * driver common to tty and keyboard/mouse sub-drivers. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +void +zs_break(cs, set) + struct zs_chanstate *cs; + int set; +{ + + if (set) { + cs->cs_preg[5] |= ZSWR5_BREAK; + cs->cs_creg[5] |= ZSWR5_BREAK; + } else { + cs->cs_preg[5] &= ~ZSWR5_BREAK; + cs->cs_creg[5] &= ~ZSWR5_BREAK; + } + zs_write_reg(cs, 5, cs->cs_creg[5]); +} + + +/* + * drain on-chip fifo + */ +void +zs_iflush(cs) + struct zs_chanstate *cs; +{ + u_char c, rr0, rr1; + int i; + + /* + * Count how many times we loop. Some systems, such as some + * Apple PowerBooks, claim to have SCC's which they really don't. + */ + for (i = 0; i < 32; i++) { + /* Is there input available? */ + rr0 = zs_read_csr(cs); + if ((rr0 & ZSRR0_RX_READY) == 0) + break; + + /* + * First read the status, because reading the data + * destroys the status of this char. + */ + rr1 = zs_read_reg(cs, 1); + c = zs_read_data(cs); + + if (rr1 & (ZSRR1_FE | ZSRR1_DO | ZSRR1_PE)) { + /* Clear the receive error. */ + zs_write_csr(cs, ZSWR0_RESET_ERRORS); + } + } +} + + +/* + * Write the given register set to the given zs channel in the proper order. + * The channel must not be transmitting at the time. The receiver will + * be disabled for the time it takes to write all the registers. + * Call this with interrupts disabled. + */ +void +zs_loadchannelregs(cs) + struct zs_chanstate *cs; +{ + u_char *reg; + + zs_write_csr(cs, ZSM_RESET_ERR); /* XXX: reset error condition */ + +#if 1 + /* + * XXX: Is this really a good idea? + * XXX: Should go elsewhere! -gwr + */ + zs_iflush(cs); /* XXX */ +#endif + + if (memcmp((caddr_t)cs->cs_preg, (caddr_t)cs->cs_creg, 16) == 0) + return; /* only change if values are different */ + + /* Copy "pending" regs to "current" */ + memcpy((caddr_t)cs->cs_creg, (caddr_t)cs->cs_preg, 16); + reg = cs->cs_creg; /* current regs */ + + /* disable interrupts */ + zs_write_reg(cs, 1, reg[1] & ~ZSWR1_IMASK); + + /* baud clock divisor, stop bits, parity */ + zs_write_reg(cs, 4, reg[4]); + + /* misc. TX/RX control bits */ + zs_write_reg(cs, 10, reg[10]); + + /* char size, enable (RX/TX) */ + zs_write_reg(cs, 3, reg[3] & ~ZSWR3_RX_ENABLE); + zs_write_reg(cs, 5, reg[5] & ~ZSWR5_TX_ENABLE); + + /* synchronous mode stuff */ + zs_write_reg(cs, 6, reg[6]); + zs_write_reg(cs, 7, reg[7]); + +#if 0 + /* + * Registers 2 and 9 are special because they are + * actually common to both channels, but must be + * programmed through channel A. The "zsc" attach + * function takes care of setting these registers + * and they should not be touched thereafter. + */ + /* interrupt vector */ + zs_write_reg(cs, 2, reg[2]); + /* master interrupt control */ + zs_write_reg(cs, 9, reg[9]); +#endif + + /* Shut down the BRG */ + zs_write_reg(cs, 14, reg[14] & ~ZSWR14_BAUD_ENA); + +#ifdef ZS_MD_SETCLK + /* Let the MD code setup any external clock. */ + ZS_MD_SETCLK(cs); +#endif /* ZS_MD_SETCLK */ + + /* clock mode control */ + zs_write_reg(cs, 11, reg[11]); + + /* baud rate (lo/hi) */ + zs_write_reg(cs, 12, reg[12]); + zs_write_reg(cs, 13, reg[13]); + + /* Misc. control bits */ + zs_write_reg(cs, 14, reg[14]); + + /* which lines cause status interrupts */ + zs_write_reg(cs, 15, reg[15]); + + /* + * Zilog docs recommend resetting external status twice at this + * point. Mainly as the status bits are latched, and the first + * interrupt clear might unlatch them to new values, generating + * a second interrupt request. + */ + zs_write_csr(cs, ZSM_RESET_STINT); + zs_write_csr(cs, ZSM_RESET_STINT); + + /* char size, enable (RX/TX)*/ + zs_write_reg(cs, 3, reg[3]); + zs_write_reg(cs, 5, reg[5]); + + /* interrupt enables: TX, TX, STATUS */ + zs_write_reg(cs, 1, reg[1]); +} + + +/* + * ZS hardware interrupt. Scan all ZS channels. NB: we know here that + * channels are kept in (A,B) pairs. + * + * Do just a little, then get out; set a software interrupt if more + * work is needed. + * + * We deliberately ignore the vectoring Zilog gives us, and match up + * only the number of `reset interrupt under service' operations, not + * the order. + */ +int +zsc_intr_hard(arg) + void *arg; +{ + struct zsc_softc *zsc = arg; + struct zs_chanstate *cs; + u_char rr3; + + /* First look at channel A. */ + cs = zsc->zsc_cs[0]; + /* Note: only channel A has an RR3 */ + rr3 = zs_read_reg(cs, 3); + + /* + * Clear interrupt first to avoid a race condition. + * If a new interrupt condition happens while we are + * servicing this one, we will get another interrupt + * shortly. We can NOT just sit here in a loop, or + * we will cause horrible latency for other devices + * on this interrupt level (i.e. sun3x floppy disk). + */ + if (rr3 & (ZSRR3_IP_A_RX | ZSRR3_IP_A_TX | ZSRR3_IP_A_STAT)) { + zs_write_csr(cs, ZSWR0_CLR_INTR); + if (rr3 & ZSRR3_IP_A_RX) + (*cs->cs_ops->zsop_rxint)(cs); + if (rr3 & ZSRR3_IP_A_STAT) + (*cs->cs_ops->zsop_stint)(cs, 0); + if (rr3 & ZSRR3_IP_A_TX) + (*cs->cs_ops->zsop_txint)(cs); + } + + /* Now look at channel B. */ + cs = zsc->zsc_cs[1]; + if (rr3 & (ZSRR3_IP_B_RX | ZSRR3_IP_B_TX | ZSRR3_IP_B_STAT)) { + zs_write_csr(cs, ZSWR0_CLR_INTR); + if (rr3 & ZSRR3_IP_B_RX) + (*cs->cs_ops->zsop_rxint)(cs); + if (rr3 & ZSRR3_IP_B_STAT) + (*cs->cs_ops->zsop_stint)(cs, 0); + if (rr3 & ZSRR3_IP_B_TX) + (*cs->cs_ops->zsop_txint)(cs); + } + + /* Note: caller will check cs_x->cs_softreq and DTRT. */ + return (rr3); +} + + +/* + * ZS software interrupt. Scan all channels for deferred interrupts. + */ +int +zsc_intr_soft(arg) + void *arg; +{ + struct zsc_softc *zsc = arg; + struct zs_chanstate *cs; + int rval, chan; + + rval = 0; + for (chan = 0; chan < 2; chan++) { + cs = zsc->zsc_cs[chan]; + + /* + * The softint flag can be safely cleared once + * we have decided to call the softint routine. + * (No need to do splzs() first.) + */ + if (cs->cs_softreq) { + cs->cs_softreq = 0; + (*cs->cs_ops->zsop_softint)(cs); + rval++; + } + } + return (rval); +} + +/* + * Provide a null zs "ops" vector. + */ + +void zsnull_rxint(struct zs_chanstate *); +void zsnull_stint(struct zs_chanstate *, int); +void zsnull_txint(struct zs_chanstate *); +void zsnull_softint(struct zs_chanstate *); + +void +zsnull_rxint(cs) + struct zs_chanstate *cs; +{ + /* Ask for softint() call. */ + cs->cs_softreq = 1; +} + +void +zsnull_stint(cs, force) + struct zs_chanstate *cs; + int force; +{ + /* Ask for softint() call. */ + cs->cs_softreq = 1; +} + +void +zsnull_txint(cs) + struct zs_chanstate *cs; +{ + /* Ask for softint() call. */ + cs->cs_softreq = 1; +} + +void +zsnull_softint(cs) + struct zs_chanstate *cs; +{ + zs_write_reg(cs, 1, 0); + zs_write_reg(cs, 15, 0); +} + +struct zsops zsops_null = { + zsnull_rxint, /* receive char available */ + zsnull_stint, /* external/status */ + zsnull_txint, /* xmit buffer empty */ + zsnull_softint, /* process software interrupt */ +}; diff --git a/sys/arch/macppc/dev/z8530sc.h b/sys/arch/macppc/dev/z8530sc.h new file mode 100644 index 00000000000..b3020c30eb0 --- /dev/null +++ b/sys/arch/macppc/dev/z8530sc.h @@ -0,0 +1,158 @@ +/* $OpenBSD: z8530sc.h,v 1.1 2002/09/06 13:56:51 drahn Exp $ */ +/* $NetBSD: z8530sc.h,v 1.15 2001/05/11 01:40:48 thorpej Exp $ */ + +/* + * Copyright (c) 1994 Gordon W. Ross + * Copyright (c) 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * This software was developed by the Computer Systems Engineering group + * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and + * contributed to Berkeley. + * + * All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Lawrence Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)zsvar.h 8.1 (Berkeley) 6/11/93 + */ + + +/* + * Function vector - per channel + */ +struct zs_chanstate; +struct zsops { + void (*zsop_rxint)(struct zs_chanstate *); + /* receive char available */ + void (*zsop_stint)(struct zs_chanstate *, int); + /* external/status */ + void (*zsop_txint)(struct zs_chanstate *); + /* xmit buffer empty */ + void (*zsop_softint)(struct zs_chanstate *); + /* process software interrupt */ +}; + +extern struct zsops zsops_null; + + +/* + * Software state, per zs channel. + */ +struct zs_chanstate { + + /* Pointers to the device registers. */ + volatile u_char *cs_reg_csr; /* ctrl, status, and reg. number. */ + volatile u_char *cs_reg_data; /* data or numbered register */ + + int cs_channel; /* sub-unit number */ + void *cs_private; /* sub-driver data pointer */ + struct zsops *cs_ops; + + int cs_brg_clk; /* BAUD Rate Generator clock + * (usually PCLK / 16) */ + int cs_defspeed; /* default baud rate */ + int cs_defcflag; /* default cflag */ + + /* + * We must keep a copy of the write registers as they are + * mostly write-only and we sometimes need to set and clear + * individual bits (e.g., in WR3). Not all of these are + * needed but 16 bytes is cheap and this makes the addressing + * simpler. Unfortunately, we can only write to some registers + * when the chip is not actually transmitting, so whenever + * we are expecting a `transmit done' interrupt the preg array + * is allowed to `get ahead' of the current values. In a + * few places we must change the current value of a register, + * rather than (or in addition to) the pending value; for these + * cs_creg[] contains the current value. + */ + u_char cs_creg[16]; /* current values */ + u_char cs_preg[16]; /* pending values */ + int cs_heldchange; /* change pending (creg != preg) */ + + u_char cs_rr0; /* last rr0 processed */ + u_char cs_rr0_delta; /* rr0 changes at status intr. */ + u_char cs_rr0_mask; /* rr0 bits that stop output */ + u_char cs_rr0_dcd; /* which bit to read as DCD */ + u_char cs_rr0_cts; /* which bit to read as CTS */ + u_char cs_rr0_pps; /* which bit to use for PPS */ + /* the above is set only while CRTSCTS is enabled. */ + + u_char cs_wr5_dtr; /* which bit to write as DTR */ + u_char cs_wr5_rts; /* which bit to write as RTS */ + /* the above is set only while CRTSCTS is enabled. */ + + char cs_softreq; /* need soft interrupt call */ + char cs_spare1; /* (for skippy :) */ + + /* power management hooks */ + int (*enable)(struct zs_chanstate *); + void (*disable)(struct zs_chanstate *); + int enabled; + + /* MD code might define a larger variant of this. */ +}; + +struct consdev; +struct zsc_attach_args { + char *type; /* type name 'serial', 'keyboard', 'mouse' */ + int channel; /* two serial channels per zsc */ + int hwflags; /* see definitions below */ + /* `consdev' is only valid if ZS_HWFLAG_USE_CONSDEV is set */ + struct consdev *consdev; +}; +/* In case of split console devices, use these: */ +#define ZS_HWFLAG_CONSOLE_INPUT 1 +#define ZS_HWFLAG_CONSOLE_OUTPUT 2 +#define ZS_HWFLAG_CONSOLE \ + (ZS_HWFLAG_CONSOLE_INPUT | ZS_HWFLAG_CONSOLE_OUTPUT) +#define ZS_HWFLAG_NO_DCD 4 /* Ignore the DCD bit */ +#define ZS_HWFLAG_NO_CTS 8 /* Ignore the CTS bit */ +#define ZS_HWFLAG_RAW 16 /* advise raw mode */ +#define ZS_HWFLAG_USE_CONSDEV 32 /* Use console ops from `consdev' */ +#define ZS_HWFLAG_NORESET 64 /* Don't reset at attach time */ + +int zsc_intr_soft(void *); +int zsc_intr_hard(void *); + +void zs_abort(struct zs_chanstate *); +void zs_break(struct zs_chanstate *, int); +void zs_iflush(struct zs_chanstate *); +void zs_loadchannelregs(struct zs_chanstate *); +int zs_set_speed(struct zs_chanstate *, int); +int zs_set_modes(struct zs_chanstate *, int); + +extern int zs_major; + +int zs_check_kgdb(struct zs_chanstate *, int); + diff --git a/sys/arch/macppc/dev/z8530tty.c b/sys/arch/macppc/dev/z8530tty.c new file mode 100644 index 00000000000..fa5ed80f464 --- /dev/null +++ b/sys/arch/macppc/dev/z8530tty.c @@ -0,0 +1,1642 @@ +/* $OpenBSD: z8530tty.c,v 1.1 2002/09/06 13:56:51 drahn Exp $ */ +/* $NetBSD: z8530tty.c,v 1.13 1996/10/16 20:42:14 gwr Exp $ */ + +/*- + * Copyright (c) 1993, 1994, 1995, 1996, 1997, 1998, 1999 + * Charles M. Hannum. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Charles M. Hannum. + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Copyright (c) 1994 Gordon W. Ross + * Copyright (c) 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * This software was developed by the Computer Systems Engineering group + * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and + * contributed to Berkeley. + * + * All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Lawrence Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)zs.c 8.1 (Berkeley) 7/19/93 + */ + +/* + * Zilog Z8530 Dual UART driver (tty interface) + * + * This is the "slave" driver that will be attached to + * the "zsc" driver for plain "tty" async. serial lines. + * + * Credits, history: + * + * The original version of this code was the sparc/dev/zs.c driver + * as distributed with the Berkeley 4.4 Lite release. Since then, + * Gordon Ross reorganized the code into the current parent/child + * driver scheme, separating the Sun keyboard and mouse support + * into independent child drivers. + * + * RTS/CTS flow-control support was a collaboration of: + * Gordon Ross , + * Bill Studenmund + * Ian Dall + * + * The driver was massively overhauled in November 1997 by Charles Hannum, + * fixing *many* bugs, and substantially improving performance. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#ifdef KGDB +extern int zs_check_kgdb(); +#endif + +/* + * Allow the MD var.h to override the default CFLAG so that + * console messages during boot come out with correct parity. + */ +#ifndef ZSTTY_DEF_CFLAG +#define ZSTTY_DEF_CFLAG TTYDEF_CFLAG +#endif + +/* + * How many input characters we can buffer. + * The port-specific var.h may override this. + * Note: must be a power of two! + */ +#ifndef ZSTTY_RING_SIZE +#define ZSTTY_RING_SIZE 2048 +#endif + +/* + * Make this an option variable one can patch. + * But be warned: this must be a power of 2! + */ +u_int zstty_rbuf_size = ZSTTY_RING_SIZE; + +/* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */ +u_int zstty_rbuf_hiwat = (ZSTTY_RING_SIZE * 1) / 4; +u_int zstty_rbuf_lowat = (ZSTTY_RING_SIZE * 3) / 4; + +struct zstty_softc { + struct device zst_dev; /* required first: base device */ + struct tty *zst_tty; + struct zs_chanstate *zst_cs; + + struct timeout zst_diag_ch; + + u_int zst_overflows, + zst_floods, + zst_errors; + + int zst_hwflags, /* see z8530var.h */ + zst_swflags; /* TIOCFLAG_SOFTCAR, ... */ + + u_int zst_r_hiwat, + zst_r_lowat; + u_char *volatile zst_rbget, + *volatile zst_rbput; + volatile u_int zst_rbavail; + u_char *zst_rbuf, + *zst_ebuf; + + /* + * The transmit byte count and address are used for pseudo-DMA + * output in the hardware interrupt code. PDMA can be suspended + * to get pending changes done; heldtbc is used for this. It can + * also be stopped for ^S; this sets TS_TTSTOP in tp->t_state. + */ + u_char *zst_tba; /* transmit buffer address */ + u_int zst_tbc, /* transmit byte count */ + zst_heldtbc; /* held tbc while xmission stopped */ + + /* Flags to communicate with zstty_softint() */ + volatile u_char zst_rx_flags, /* receiver blocked */ +#define RX_TTY_BLOCKED 0x01 +#define RX_TTY_OVERFLOWED 0x02 +#define RX_IBUF_BLOCKED 0x04 +#define RX_IBUF_OVERFLOWED 0x08 +#define RX_ANY_BLOCK 0x0f + zst_tx_busy, /* working on an output chunk */ + zst_tx_done, /* done with one output chunk */ + zst_tx_stopped, /* H/W level stop (lost CTS) */ + zst_st_check, /* got a status interrupt */ + zst_rx_ready; + + /* PPS signal on DCD, with or without inkernel clock disciplining */ + u_char zst_ppsmask; /* pps signal mask */ + u_char zst_ppsassert; /* pps leading edge */ + u_char zst_ppsclear; /* pps trailing edge */ +}; + + +/* Definition of the driver for autoconfig. */ +int zstty_match(struct device *, void *, void *); +void zstty_attach(struct device *, struct device *, void *); + +struct cfattach zstty_ca = { + sizeof(struct zstty_softc), zstty_match, zstty_attach +}; + +struct cfdriver zstty_cd = { + NULL, "zstty", DV_TTY +}; + +struct zsops zsops_tty; + +/* Routines called from other code. */ +cdev_decl(zs); /* open, close, read, write, ioctl, stop, ... */ + +void zs_shutdown(struct zstty_softc *); +void zsstart(struct tty *); +int zsparam(struct tty *, struct termios *); +void zs_modem(struct zstty_softc *, int); +void tiocm_to_zs(struct zstty_softc *, u_long, int); +int zs_to_tiocm(struct zstty_softc *); +int zshwiflow(struct tty *, int); +void zs_hwiflow(struct zstty_softc *); +void zs_maskintr(struct zstty_softc *); + +/* Low-level routines. */ +void zstty_rxint(struct zs_chanstate *); +void zstty_stint(struct zs_chanstate *, int); +void zstty_txint(struct zs_chanstate *); +void zstty_softint(struct zs_chanstate *); +void zstty_diag(void *); + +#define ZSUNIT(x) (minor(x) & 0x7ffff) +#define ZSDIALOUT(x) (minor(x) & 0x80000) + +/* + * zstty_match: how is this zs channel configured? + */ +int +zstty_match(parent, match, aux) + struct device *parent; + void *match, *aux; +{ + struct cfdata *cf = match; + struct zsc_attach_args *args = aux; + + /* Exact match is better than wildcard. */ + if (cf->cf_loc[ZSCCF_CHANNEL] == args->channel) + return 2; + + /* This driver accepts wildcard. */ + if (cf->cf_loc[ZSCCF_CHANNEL] == ZSCCF_CHANNEL_DEFAULT) + return 1; + + return 0; +} + +void +zstty_attach(parent, self, aux) + struct device *parent, *self; + void *aux; + +{ + struct zsc_softc *zsc = (void *) parent; + struct zstty_softc *zst = (void *) self; + struct zsc_attach_args *args = aux; + struct zs_chanstate *cs; + struct cfdata *cf; + struct tty *tp; + int channel, s, tty_unit; + dev_t dev; + char *i, *o; + int maj; + + cf = zst->zst_dev.dv_cfdata; + + timeout_set(&zst->zst_diag_ch, zstty_diag, zst); + + tty_unit = zst->zst_dev.dv_unit; + channel = args->channel; + cs = zsc->zsc_cs[channel]; + cs->cs_private = zst; + cs->cs_ops = &zsops_tty; + + zst->zst_cs = cs; + zst->zst_swflags = cf->cf_flags; /* softcar, etc. */ + zst->zst_hwflags = args->hwflags; + /* locate the major number */ + for (maj = 0; maj < nchrdev; maj++) + if (cdevsw[maj].d_open == zsopen) + break; + dev = makedev(maj, tty_unit); + + if (zst->zst_swflags) + printf(" flags 0x%x", zst->zst_swflags); + + /* + * Check whether we serve as a console device. + * XXX - split console input/output channels aren't + * supported yet on /dev/console + */ + i = o = NULL; + if ((zst->zst_hwflags & ZS_HWFLAG_CONSOLE_INPUT) != 0) { + i = "input"; + if ((args->hwflags & ZS_HWFLAG_USE_CONSDEV) != 0) { + args->consdev->cn_dev = dev; + cn_tab->cn_pollc = args->consdev->cn_pollc; + cn_tab->cn_getc = args->consdev->cn_getc; + } + cn_tab->cn_dev = dev; + /* Set console magic to BREAK */ + } + if ((zst->zst_hwflags & ZS_HWFLAG_CONSOLE_OUTPUT) != 0) { + o = "output"; + if ((args->hwflags & ZS_HWFLAG_USE_CONSDEV) != 0) { + cn_tab->cn_putc = args->consdev->cn_putc; + } + cn_tab->cn_dev = dev; + } + if (i != NULL || o != NULL) + printf(" (console %s)", i ? (o ? "i/o" : i) : o); + +#ifdef KGDB + /* + * Allow kgdb to "take over" this port. If this port is + * NOT the kgdb port, zs_check_kgdb() will return zero. + * If it IS the kgdb port, it will print "kgdb,...\n" + * and then return non-zero. + */ + if (zs_check_kgdb(cs, dev)) { + printf(" (kgdb)\n"); + /* + * This is the kgdb port (exclusive use) + * so skip the normal attach code. + */ + return; + } +#endif + + if (strcmp(args->type, "keyboard") == 0 || + strcmp(args->type, "mouse") == 0) + printf(": %s", args->type); + + printf("\n"); + + tp = ttymalloc(); + tp->t_dev = dev; + tp->t_oproc = zsstart; + tp->t_param = zsparam; + tp->t_hwiflow = zshwiflow; + tty_attach(tp); + + zst->zst_tty = tp; + zst->zst_rbuf = malloc(zstty_rbuf_size << 1, M_DEVBUF, M_WAITOK); + zst->zst_ebuf = zst->zst_rbuf + (zstty_rbuf_size << 1); + /* Disable the high water mark. */ + zst->zst_r_hiwat = 0; + zst->zst_r_lowat = 0; + zst->zst_rbget = zst->zst_rbput = zst->zst_rbuf; + zst->zst_rbavail = zstty_rbuf_size; + + /* if there are no enable/disable functions, assume the device + is always enabled */ + if (!cs->enable) + cs->enabled = 1; + + /* + * Hardware init + */ + if (ISSET(zst->zst_hwflags, ZS_HWFLAG_CONSOLE)) { + /* Call zsparam similar to open. */ + struct termios t; + + /* Wait a while for previous console output to complete */ + DELAY(10000); + + /* Setup the "new" parameters in t. */ + t.c_ispeed = 0; + t.c_ospeed = cs->cs_defspeed; + t.c_cflag = cs->cs_defcflag; + + s = splzs(); + + /* + * Turn on receiver and status interrupts. + * We defer the actual write of the register to zsparam(), + * but we must make sure status interrupts are turned on by + * the time zsparam() reads the initial rr0 state. + */ + SET(cs->cs_preg[1], ZSWR1_RIE | ZSWR1_SIE); + + splx(s); + + /* Make sure zsparam will see changes. */ + tp->t_ospeed = 0; + (void) zsparam(tp, &t); + + s = splzs(); + + /* Make sure DTR is on now. */ + zs_modem(zst, 1); + + splx(s); + } else if (!ISSET(zst->zst_hwflags, ZS_HWFLAG_NORESET)) { + /* Not the console; may need reset. */ + int reset; + + reset = (channel == 0) ? ZSWR9_A_RESET : ZSWR9_B_RESET; + + s = splzs(); + + zs_write_reg(cs, 9, reset); + + /* Will raise DTR in open. */ + zs_modem(zst, 0); + + splx(s); + } +} + + +/* + * Return pointer to our tty. + */ +struct tty * +zstty(dev) + dev_t dev; +{ + struct zstty_softc *zst; + int unit = minor(dev); + +#ifdef DIAGNOSTIC + if (unit >= zstty_cd.cd_ndevs) + panic("zstty"); +#endif + zst = zstty_cd.cd_devs[unit]; + return (zst->zst_tty); +} + + +void +zs_shutdown(zst) + struct zstty_softc *zst; +{ + struct zs_chanstate *cs = zst->zst_cs; + struct tty *tp = zst->zst_tty; + int s; + + s = splzs(); + + /* If we were asserting flow control, then deassert it. */ + SET(zst->zst_rx_flags, RX_IBUF_BLOCKED); + zs_hwiflow(zst); + + /* Clear any break condition set with TIOCSBRK. */ + zs_break(cs, 0); + + /* Turn off PPS capture on last close. */ + zst->zst_ppsmask = 0; + + /* + * Hang up if necessary. Wait a bit, so the other side has time to + * notice even if we immediately open the port again. + */ + if (ISSET(tp->t_cflag, HUPCL)) { + zs_modem(zst, 0); + (void) tsleep(cs, TTIPRI, ttclos, hz); + } + + /* Turn off interrupts if not the console. */ + if (!ISSET(zst->zst_hwflags, ZS_HWFLAG_CONSOLE)) { + CLR(cs->cs_preg[1], ZSWR1_RIE | ZSWR1_SIE); + cs->cs_creg[1] = cs->cs_preg[1]; + zs_write_reg(cs, 1, cs->cs_creg[1]); + } + +/* Call the power management hook. */ + if (cs->disable) { +#ifdef DIAGNOSTIC + if (!cs->enabled) + panic("zs_shutdown: not enabled?"); +#endif + (*cs->disable)(zst->zst_cs); + } + + splx(s); +} + +/* + * Open a zs serial (tty) port. + */ +int +zsopen(dev, flags, mode, p) + dev_t dev; + int flags; + int mode; + struct proc *p; +{ + register struct tty *tp; + register struct zs_chanstate *cs; + struct zstty_softc *zst; + int s, s2; + int error, unit; + + unit = minor(dev); + if (unit >= zstty_cd.cd_ndevs) + return (ENXIO); + zst = zstty_cd.cd_devs[unit]; + if (zst == NULL) + return (ENXIO); + tp = zst->zst_tty; + cs = zst->zst_cs; + + /* If KGDB took the line, then tp==NULL */ + if (tp == NULL) + return (EBUSY); + + if (ISSET(tp->t_state, TS_ISOPEN) && + ISSET(tp->t_state, TS_XCLUDE) && + p->p_ucred->cr_uid != 0) + return (EBUSY); + + s = spltty(); + + /* + * Do the following iff this is a first open. + */ + if (!ISSET(tp->t_state, TS_ISOPEN)) { + struct termios t; + + tp->t_dev = dev; + + /* Call the power management hook. */ + if (cs->enable) { + if ((*cs->enable)(cs)) { + splx(s); + printf("%s: device enable failed\n", + zst->zst_dev.dv_xname); + return (EIO); + } + } + + /* + * Initialize the termios status to the defaults. Add in the + * sticky bits from TIOCSFLAGS. + */ + t.c_ispeed = 0; + t.c_ospeed = cs->cs_defspeed; + t.c_cflag = cs->cs_defcflag; + if (ISSET(zst->zst_swflags, TIOCFLAG_CLOCAL)) + SET(t.c_cflag, CLOCAL); + if (ISSET(zst->zst_swflags, TIOCFLAG_CRTSCTS)) + SET(t.c_cflag, CRTSCTS); + if (ISSET(zst->zst_swflags, TIOCFLAG_MDMBUF)) + SET(t.c_cflag, MDMBUF); + + s2 = splzs(); + + /* + * Turn on receiver and status interrupts. + * We defer the actual write of the register to zsparam(), + * but we must make sure status interrupts are turned on by + * the time zsparam() reads the initial rr0 state. + */ + SET(cs->cs_preg[1], ZSWR1_RIE | ZSWR1_SIE); + + /* Clear PPS capture state on first open. */ + zst->zst_ppsmask = 0; + + splx(s2); + + /* Make sure zsparam will see changes. */ + tp->t_ospeed = 0; + (void) zsparam(tp, &t); + + /* + * Note: zsparam has done: cflag, ispeed, ospeed + * so we just need to do: iflag, oflag, lflag, cc + * For "raw" mode, just leave all zeros. + */ + if (!ISSET(zst->zst_hwflags, ZS_HWFLAG_RAW)) { + tp->t_iflag = TTYDEF_IFLAG; + tp->t_oflag = TTYDEF_OFLAG; + tp->t_lflag = TTYDEF_LFLAG; + } else { + tp->t_iflag = 0; + tp->t_oflag = 0; + tp->t_lflag = 0; + } + ttychars(tp); + ttsetwater(tp); + + s2 = splzs(); + + /* + * Turn on DTR. We must always do this, even if carrier is not + * present, because otherwise we'd have to use TIOCSDTR + * immediately after setting CLOCAL, which applications do not + * expect. We always assert DTR while the device is open + * unless explicitly requested to deassert it. + */ + zs_modem(zst, 1); + + /* Clear the input ring, and unblock. */ + zst->zst_rbget = zst->zst_rbput = zst->zst_rbuf; + zst->zst_rbavail = zstty_rbuf_size; + zs_iflush(cs); + CLR(zst->zst_rx_flags, RX_ANY_BLOCK); + zs_hwiflow(zst); + + splx(s2); + } + + splx(s); + + error = ((*linesw[tp->t_line].l_open)(dev, tp)); + if (error) + goto bad; + + return (0); + +bad: + if (!ISSET(tp->t_state, TS_ISOPEN)) { + /* + * We failed to open the device, and nobody else had it opened. + * Clean up the state as appropriate. + */ + zs_shutdown(zst); + } + + return (error); +} + +/* + * Close a zs serial port. + */ +int +zsclose(dev, flags, mode, p) + dev_t dev; + int flags; + int mode; + struct proc *p; +{ + struct zstty_softc *zst; + register struct zs_chanstate *cs; + register struct tty *tp; + + zst = zstty_cd.cd_devs[minor(dev)]; + cs = zst->zst_cs; + tp = zst->zst_tty; + + /* XXX This is for cons.c. */ + if (!ISSET(tp->t_state, TS_ISOPEN)) + return 0; + + (*linesw[tp->t_line].l_close)(tp, flags); + ttyclose(tp); + + if (!ISSET(tp->t_state, TS_ISOPEN)) { + /* + * Although we got a last close, the device may still be in + * use; e.g. if this was the dialout node, and there are still + * processes waiting for carrier on the non-dialout node. + */ + zs_shutdown(zst); + } + + return (0); +} + +/* + * Read/write zs serial port. + */ +int +zsread(dev, uio, flags) + dev_t dev; + struct uio *uio; + int flags; +{ + struct zstty_softc *zst; + struct tty *tp; + + zst = zstty_cd.cd_devs[minor(dev)]; + tp = zst->zst_tty; + + return (*linesw[tp->t_line].l_read)(tp, uio, flags); +} + +int +zswrite(dev, uio, flags) + dev_t dev; + struct uio *uio; + int flags; +{ + struct zstty_softc *zst; + struct tty *tp; + + zst = zstty_cd.cd_devs[minor(dev)]; + tp = zst->zst_tty; + + return (*linesw[tp->t_line].l_write)(tp, uio, flags); +} + +#define TIOCFLAG_ALL (TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL | \ + TIOCFLAG_CRTSCTS | TIOCFLAG_MDMBUF ) + +int +zsioctl(dev, cmd, data, flag, p) + dev_t dev; + u_long cmd; + caddr_t data; + int flag; + struct proc *p; +{ + struct zstty_softc *zst; + struct zs_chanstate *cs; + struct tty *tp; + int error; + int s; + + zst = zstty_cd.cd_devs[minor(dev)]; + cs = zst->zst_cs; + tp = zst->zst_tty; + + error = ((*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p)); + if (error >= 0) + return (error); + + error = ttioctl(tp, cmd, data, flag, p); + if (error >= 0) + return (error); + +#ifdef ZS_MD_IOCTL + error = ZS_MD_IOCTL; + if (error >= 0) + return (error); +#endif /* ZS_MD_IOCTL */ + + error = 0; + + s = splzs(); + + switch (cmd) { + case TIOCSBRK: + zs_break(cs, 1); + break; + + case TIOCCBRK: + zs_break(cs, 0); + break; + + case TIOCGFLAGS: + *(int *)data = zst->zst_swflags; + break; + + case TIOCSFLAGS: + error = suser(p->p_ucred, &p->p_acflag); + if (error != 0) + break; + zst->zst_swflags = *(int *)data; + break; + + case TIOCSDTR: + zs_modem(zst, 1); + break; + + case TIOCCDTR: + zs_modem(zst, 0); + break; + + case TIOCMSET: + case TIOCMBIS: + case TIOCMBIC: + tiocm_to_zs(zst, cmd, *(int *)data); + break; + + case TIOCMGET: + *(int *)data = zs_to_tiocm(zst); + break; + + default: + error = ENOTTY; + break; + } + + splx(s); + + return (error); +} + +/* + * Start or restart transmission. + */ +void +zsstart(tp) + struct tty *tp; +{ + struct zstty_softc *zst; + struct zs_chanstate *cs; + int s; + + zst = zstty_cd.cd_devs[minor(tp->t_dev)]; + cs = zst->zst_cs; + + s = spltty(); + if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) + goto out; + if (zst->zst_tx_stopped) + goto out; + + if (tp->t_outq.c_cc <= tp->t_lowat) { + if (ISSET(tp->t_state, TS_ASLEEP)) { + CLR(tp->t_state, TS_ASLEEP); + wakeup((caddr_t)&tp->t_outq); + } + selwakeup(&tp->t_wsel); + if (tp->t_outq.c_cc == 0) + goto out; + } + + /* Grab the first contiguous region of buffer space. */ + { + u_char *tba; + int tbc; + + tba = tp->t_outq.c_cf; + tbc = ndqb(&tp->t_outq, 0); + + (void) splzs(); + + zst->zst_tba = tba; + zst->zst_tbc = tbc; + } + + SET(tp->t_state, TS_BUSY); + zst->zst_tx_busy = 1; + + /* Enable transmit completion interrupts if necessary. */ + if (!ISSET(cs->cs_preg[1], ZSWR1_TIE)) { + SET(cs->cs_preg[1], ZSWR1_TIE); + cs->cs_creg[1] = cs->cs_preg[1]; + zs_write_reg(cs, 1, cs->cs_creg[1]); + } + + /* Output the first character of the contiguous buffer. */ + { + zs_write_data(cs, *zst->zst_tba); + zst->zst_tbc--; + zst->zst_tba++; + } +out: + splx(s); +} + +/* + * Stop output, e.g., for ^S or output flush. + */ +int +zsstop(tp, flag) + struct tty *tp; + int flag; +{ + struct zstty_softc *zst; + struct zs_chanstate *cs; + int s; + + zst = zstty_cd.cd_devs[minor(tp->t_dev)]; + cs = zst->zst_cs; + + s = splzs(); + if (ISSET(tp->t_state, TS_BUSY)) { + /* Stop transmitting at the next chunk. */ + zst->zst_tbc = 0; + zst->zst_heldtbc = 0; + if (!ISSET(tp->t_state, TS_TTSTOP)) + SET(tp->t_state, TS_FLUSH); + } + splx(s); + return (0); +} + +/* + * Set ZS tty parameters from termios. + * XXX - Should just copy the whole termios after + * making sure all the changes could be done. + */ +int +zsparam(tp, t) + struct tty *tp; + struct termios *t; +{ + struct zstty_softc *zst; + struct zs_chanstate *cs; + int ospeed, cflag; + u_char tmp3, tmp4, tmp5; + int s, error; + + zst = zstty_cd.cd_devs[minor(tp->t_dev)]; + cs = zst->zst_cs; + + ospeed = t->c_ospeed; + cflag = t->c_cflag; + + /* Check requested parameters. */ + if (ospeed < 0) + return (EINVAL); + if (t->c_ispeed && t->c_ispeed != ospeed) + return (EINVAL); + + /* + * For the console, always force CLOCAL and !HUPCL, so that the port + * is always active. + */ + if (ISSET(zst->zst_swflags, TIOCFLAG_SOFTCAR) || + ISSET(zst->zst_hwflags, ZS_HWFLAG_CONSOLE)) { + SET(cflag, CLOCAL); + CLR(cflag, HUPCL); + } + + /* + * Only whack the UART when params change. + * Some callers need to clear tp->t_ospeed + * to make sure initialization gets done. + */ + if (tp->t_ospeed == ospeed && + tp->t_cflag == cflag) + return (0); + + /* + * Call MD functions to deal with changed + * clock modes or H/W flow control modes. + * The BRG divisor is set now. (reg 12,13) + */ + error = zs_set_speed(cs, ospeed); + if (error) + return (error); + error = zs_set_modes(cs, cflag); + if (error) + return (error); + + /* + * Block interrupts so that state will not + * be altered until we are done setting it up. + * + * Initial values in cs_preg are set before + * our attach routine is called. The master + * interrupt enable is handled by zsc.c + */ + s = splzs(); + + /* + * Recalculate which status ints to enable. + */ + zs_maskintr(zst); + + /* Recompute character size bits. */ + tmp3 = cs->cs_preg[3]; + tmp5 = cs->cs_preg[5]; + CLR(tmp3, ZSWR3_RXSIZE); + CLR(tmp5, ZSWR5_TXSIZE); + switch (ISSET(cflag, CSIZE)) { + case CS5: + SET(tmp3, ZSWR3_RX_5); + SET(tmp5, ZSWR5_TX_5); + break; + case CS6: + SET(tmp3, ZSWR3_RX_6); + SET(tmp5, ZSWR5_TX_6); + break; + case CS7: + SET(tmp3, ZSWR3_RX_7); + SET(tmp5, ZSWR5_TX_7); + break; + case CS8: + SET(tmp3, ZSWR3_RX_8); + SET(tmp5, ZSWR5_TX_8); + break; + } + cs->cs_preg[3] = tmp3; + cs->cs_preg[5] = tmp5; + + /* + * Recompute the stop bits and parity bits. Note that + * zs_set_speed() may have set clock selection bits etc. + * in wr4, so those must preserved. + */ + tmp4 = cs->cs_preg[4]; + CLR(tmp4, ZSWR4_SBMASK | ZSWR4_PARMASK); + if (ISSET(cflag, CSTOPB)) + SET(tmp4, ZSWR4_TWOSB); + else + SET(tmp4, ZSWR4_ONESB); + if (!ISSET(cflag, PARODD)) + SET(tmp4, ZSWR4_EVENP); + if (ISSET(cflag, PARENB)) + SET(tmp4, ZSWR4_PARENB); + cs->cs_preg[4] = tmp4; + + /* And copy to tty. */ + tp->t_ispeed = 0; + tp->t_ospeed = ospeed; + tp->t_cflag = cflag; + + /* + * If nothing is being transmitted, set up new current values, + * else mark them as pending. + */ + if (!cs->cs_heldchange) { + if (zst->zst_tx_busy) { + zst->zst_heldtbc = zst->zst_tbc; + zst->zst_tbc = 0; + cs->cs_heldchange = 1; + } else + zs_loadchannelregs(cs); + } + + /* + * If hardware flow control is disabled, turn off the buffer water + * marks and unblock any soft flow control state. Otherwise, enable + * the water marks. + */ + if (!ISSET(cflag, CHWFLOW)) { + zst->zst_r_hiwat = 0; + zst->zst_r_lowat = 0; + if (ISSET(zst->zst_rx_flags, RX_TTY_OVERFLOWED)) { + CLR(zst->zst_rx_flags, RX_TTY_OVERFLOWED); + zst->zst_rx_ready = 1; + cs->cs_softreq = 1; + } + if (ISSET(zst->zst_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) { + CLR(zst->zst_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED); + zs_hwiflow(zst); + } + } else { + zst->zst_r_hiwat = zstty_rbuf_hiwat; + zst->zst_r_lowat = zstty_rbuf_lowat; + } + + /* + * Force a recheck of the hardware carrier and flow control status, + * since we may have changed which bits we're looking at. + */ + zstty_stint(cs, 1); + + splx(s); + + /* + * If hardware flow control is disabled, unblock any hard flow control + * state. + */ + if (!ISSET(cflag, CHWFLOW)) { + if (zst->zst_tx_stopped) { + zst->zst_tx_stopped = 0; + zsstart(tp); + } + } + + zstty_softint(cs); + + return (0); +} + +/* + * Compute interupt enable bits and set in the pending bits. Called both + * in zsparam() and when PPS (pulse per second timing) state changes. + * Must be called at splzs(). + */ +void +zs_maskintr(zst) + struct zstty_softc *zst; +{ + struct zs_chanstate *cs = zst->zst_cs; + int tmp15; + + cs->cs_rr0_mask = cs->cs_rr0_cts | cs->cs_rr0_dcd; + if (zst->zst_ppsmask != 0) + cs->cs_rr0_mask |= cs->cs_rr0_pps; + tmp15 = cs->cs_preg[15]; + if (ISSET(cs->cs_rr0_mask, ZSRR0_DCD)) + SET(tmp15, ZSWR15_DCD_IE); + else + CLR(tmp15, ZSWR15_DCD_IE); + if (ISSET(cs->cs_rr0_mask, ZSRR0_CTS)) + SET(tmp15, ZSWR15_CTS_IE); + else + CLR(tmp15, ZSWR15_CTS_IE); + cs->cs_preg[15] = tmp15; +} + +/* + * Raise or lower modem control (DTR/RTS) signals. If a character is + * in transmission, the change is deferred. + */ +void +zs_modem(zst, onoff) + struct zstty_softc *zst; + int onoff; +{ + struct zs_chanstate *cs = zst->zst_cs; + + if (cs->cs_wr5_dtr == 0) + return; + + if (onoff) + SET(cs->cs_preg[5], cs->cs_wr5_dtr); + else + CLR(cs->cs_preg[5], cs->cs_wr5_dtr); + + if (!cs->cs_heldchange) { + if (zst->zst_tx_busy) { + zst->zst_heldtbc = zst->zst_tbc; + zst->zst_tbc = 0; + cs->cs_heldchange = 1; + } else + zs_loadchannelregs(cs); + } +} + +void +tiocm_to_zs(zst, how, ttybits) + struct zstty_softc *zst; + u_long how; + int ttybits; +{ + struct zs_chanstate *cs = zst->zst_cs; + u_char zsbits; + + zsbits = 0; + if (ISSET(ttybits, TIOCM_DTR)) + SET(zsbits, ZSWR5_DTR); + if (ISSET(ttybits, TIOCM_RTS)) + SET(zsbits, ZSWR5_RTS); + + switch (how) { + case TIOCMBIC: + CLR(cs->cs_preg[5], zsbits); + break; + + case TIOCMBIS: + SET(cs->cs_preg[5], zsbits); + break; + + case TIOCMSET: + CLR(cs->cs_preg[5], ZSWR5_RTS | ZSWR5_DTR); + SET(cs->cs_preg[5], zsbits); + break; + } + + if (!cs->cs_heldchange) { + if (zst->zst_tx_busy) { + zst->zst_heldtbc = zst->zst_tbc; + zst->zst_tbc = 0; + cs->cs_heldchange = 1; + } else + zs_loadchannelregs(cs); + } +} + +int +zs_to_tiocm(zst) + struct zstty_softc *zst; +{ + struct zs_chanstate *cs = zst->zst_cs; + u_char zsbits; + int ttybits = 0; + + zsbits = cs->cs_preg[5]; + if (ISSET(zsbits, ZSWR5_DTR)) + SET(ttybits, TIOCM_DTR); + if (ISSET(zsbits, ZSWR5_RTS)) + SET(ttybits, TIOCM_RTS); + + zsbits = cs->cs_rr0; + if (ISSET(zsbits, ZSRR0_DCD)) + SET(ttybits, TIOCM_CD); + if (ISSET(zsbits, ZSRR0_CTS)) + SET(ttybits, TIOCM_CTS); + + return (ttybits); +} + +/* + * Try to block or unblock input using hardware flow-control. + * This is called by kern/tty.c if MDMBUF|CRTSCTS is set, and + * if this function returns non-zero, the TS_TBLOCK flag will + * be set or cleared according to the "block" arg passed. + */ +int +zshwiflow(tp, block) + struct tty *tp; + int block; +{ + struct zstty_softc *zst; + struct zs_chanstate *cs; + int s; + + zst = zstty_cd.cd_devs[minor(tp->t_dev)]; + cs = zst->zst_cs; + + if (cs->cs_wr5_rts == 0) + return (0); + + s = splzs(); + if (block) { + if (!ISSET(zst->zst_rx_flags, RX_TTY_BLOCKED)) { + SET(zst->zst_rx_flags, RX_TTY_BLOCKED); + zs_hwiflow(zst); + } + } else { + if (ISSET(zst->zst_rx_flags, RX_TTY_OVERFLOWED)) { + CLR(zst->zst_rx_flags, RX_TTY_OVERFLOWED); + zst->zst_rx_ready = 1; + cs->cs_softreq = 1; + } + if (ISSET(zst->zst_rx_flags, RX_TTY_BLOCKED)) { + CLR(zst->zst_rx_flags, RX_TTY_BLOCKED); + zs_hwiflow(zst); + } + } + splx(s); + return (1); +} + +/* + * Internal version of zshwiflow + * called at splzs + */ +void +zs_hwiflow(zst) + struct zstty_softc *zst; +{ + struct zs_chanstate *cs = zst->zst_cs; + + if (cs->cs_wr5_rts == 0) + return; + + if (ISSET(zst->zst_rx_flags, RX_ANY_BLOCK)) { + CLR(cs->cs_preg[5], cs->cs_wr5_rts); + CLR(cs->cs_creg[5], cs->cs_wr5_rts); + } else { + SET(cs->cs_preg[5], cs->cs_wr5_rts); + SET(cs->cs_creg[5], cs->cs_wr5_rts); + } + zs_write_reg(cs, 5, cs->cs_creg[5]); +} + + +/**************************************************************** + * Interface to the lower layer (zscc) + ****************************************************************/ + +void zstty_rxsoft(struct zstty_softc *, struct tty *); +void zstty_txsoft(struct zstty_softc *, struct tty *); +void zstty_stsoft(struct zstty_softc *, struct tty *); + +/* + * receiver ready interrupt. + * called at splzs + */ +void +zstty_rxint(cs) + struct zs_chanstate *cs; +{ + struct zstty_softc *zst = cs->cs_private; + u_char *put, *end; + u_int cc; + u_char rr0, rr1, c; + + end = zst->zst_ebuf; + put = zst->zst_rbput; + cc = zst->zst_rbavail; + + while (cc > 0) { + /* + * First read the status, because reading the received char + * destroys the status of this char. + */ + rr1 = zs_read_reg(cs, 1); + c = zs_read_data(cs); + + if (ISSET(rr1, ZSRR1_FE | ZSRR1_DO | ZSRR1_PE)) { + /* Clear the receive error. */ + zs_write_csr(cs, ZSWR0_RESET_ERRORS); + } + + put[0] = c; + put[1] = rr1; + put += 2; + if (put >= end) + put = zst->zst_rbuf; + cc--; + + rr0 = zs_read_csr(cs); + if (!ISSET(rr0, ZSRR0_RX_READY)) + break; + } + + /* + * Current string of incoming characters ended because + * no more data was available or we ran out of space. + * Schedule a receive event if any data was received. + * If we're out of space, turn off receive interrupts. + */ + zst->zst_rbput = put; + zst->zst_rbavail = cc; + if (!ISSET(zst->zst_rx_flags, RX_TTY_OVERFLOWED)) { + zst->zst_rx_ready = 1; + cs->cs_softreq = 1; + } + + /* + * See if we are in danger of overflowing a buffer. If + * so, use hardware flow control to ease the pressure. + */ + if (!ISSET(zst->zst_rx_flags, RX_IBUF_BLOCKED) && + cc < zst->zst_r_hiwat) { + SET(zst->zst_rx_flags, RX_IBUF_BLOCKED); + zs_hwiflow(zst); + } + + /* + * If we're out of space, disable receive interrupts + * until the queue has drained a bit. + */ + if (!cc) { + SET(zst->zst_rx_flags, RX_IBUF_OVERFLOWED); + CLR(cs->cs_preg[1], ZSWR1_RIE); + cs->cs_creg[1] = cs->cs_preg[1]; + zs_write_reg(cs, 1, cs->cs_creg[1]); + } +} + +/* + * transmitter ready interrupt. (splzs) + */ +void +zstty_txint(cs) + struct zs_chanstate *cs; +{ + struct zstty_softc *zst = cs->cs_private; + + /* + * If we've delayed a parameter change, do it now, and restart + * output. + */ + if (cs->cs_heldchange) { + zs_loadchannelregs(cs); + cs->cs_heldchange = 0; + zst->zst_tbc = zst->zst_heldtbc; + zst->zst_heldtbc = 0; + } + + /* Output the next character in the buffer, if any. */ + if (zst->zst_tbc > 0) { + zs_write_data(cs, *zst->zst_tba); + zst->zst_tbc--; + zst->zst_tba++; + } else { + /* Disable transmit completion interrupts if necessary. */ + if (ISSET(cs->cs_preg[1], ZSWR1_TIE)) { + CLR(cs->cs_preg[1], ZSWR1_TIE); + cs->cs_creg[1] = cs->cs_preg[1]; + zs_write_reg(cs, 1, cs->cs_creg[1]); + } + if (zst->zst_tx_busy) { + zst->zst_tx_busy = 0; + zst->zst_tx_done = 1; + cs->cs_softreq = 1; + } + } +} + +#ifdef DDB +#include +#define DB_CONSOLE db_console +#else +#define DB_CONSOLE 1 +#endif + +/* + * status change interrupt. (splzs) + */ +void +zstty_stint(cs, force) + struct zs_chanstate *cs; + int force; +{ + struct zstty_softc *zst = cs->cs_private; + u_char rr0, delta; + + rr0 = zs_read_csr(cs); + zs_write_csr(cs, ZSWR0_RESET_STATUS); + + /* + * Check here for console break, so that we can abort + * even when interrupts are locking up the machine. + */ + if ((zst->zst_hwflags & ZS_HWFLAG_CONSOLE_INPUT) && + ISSET(rr0, ZSRR0_BREAK) && DB_CONSOLE) + zs_abort(cs); + + if (!force) + delta = rr0 ^ cs->cs_rr0; + else + delta = cs->cs_rr0_mask; + cs->cs_rr0 = rr0; + + if (ISSET(delta, cs->cs_rr0_mask)) { + SET(cs->cs_rr0_delta, delta); + + /* + * Stop output immediately if we lose the output + * flow control signal or carrier detect. + */ + if (ISSET(~rr0, cs->cs_rr0_mask)) { + zst->zst_tbc = 0; + zst->zst_heldtbc = 0; + } + + zst->zst_st_check = 1; + cs->cs_softreq = 1; + } +} + +void +zstty_diag(arg) + void *arg; +{ + struct zstty_softc *zst = arg; + int overflows, floods; + int s; + + s = splzs(); + overflows = zst->zst_overflows; + zst->zst_overflows = 0; + floods = zst->zst_floods; + zst->zst_floods = 0; + zst->zst_errors = 0; + splx(s); + + log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf flood%s\n", + zst->zst_dev.dv_xname, + overflows, overflows == 1 ? "" : "s", + floods, floods == 1 ? "" : "s"); +} + +void +zstty_rxsoft(zst, tp) + struct zstty_softc *zst; + struct tty *tp; +{ + struct zs_chanstate *cs = zst->zst_cs; + int (*rint)(int c, struct tty *tp) = linesw[tp->t_line].l_rint; + u_char *get, *end; + u_int cc, scc; + u_char rr1; + int code; + int s; + + end = zst->zst_ebuf; + get = zst->zst_rbget; + scc = cc = zstty_rbuf_size - zst->zst_rbavail; + + if (cc == zstty_rbuf_size) { + zst->zst_floods++; + if (zst->zst_errors++ == 0) + timeout_add(&zst->zst_diag_ch, 60 * hz); + } + + /* If not yet open, drop the entire buffer content here */ + if (!ISSET(tp->t_state, TS_ISOPEN)) { + get += cc << 1; + if (get >= end) + get -= zstty_rbuf_size << 1; + cc = 0; + } + while (cc) { + code = get[0]; + rr1 = get[1]; + if (ISSET(rr1, ZSRR1_DO | ZSRR1_FE | ZSRR1_PE)) { + if (ISSET(rr1, ZSRR1_DO)) { + zst->zst_overflows++; + if (zst->zst_errors++ == 0) + timeout_add(&zst->zst_diag_ch, 60 * hz); + } + if (ISSET(rr1, ZSRR1_FE)) + SET(code, TTY_FE); + if (ISSET(rr1, ZSRR1_PE)) + SET(code, TTY_PE); + } + if ((*rint)(code, tp) == -1) { + /* + * The line discipline's buffer is out of space. + */ + if (!ISSET(zst->zst_rx_flags, RX_TTY_BLOCKED)) { + /* + * We're either not using flow control, or the + * line discipline didn't tell us to block for + * some reason. Either way, we have no way to + * know when there's more space available, so + * just drop the rest of the data. + */ + get += cc << 1; + if (get >= end) + get -= zstty_rbuf_size << 1; + cc = 0; + } else { + /* + * Don't schedule any more receive processing + * until the line discipline tells us there's + * space available (through comhwiflow()). + * Leave the rest of the data in the input + * buffer. + */ + SET(zst->zst_rx_flags, RX_TTY_OVERFLOWED); + } + break; + } + get += 2; + if (get >= end) + get = zst->zst_rbuf; + cc--; + } + + if (cc != scc) { + zst->zst_rbget = get; + s = splzs(); + cc = zst->zst_rbavail += scc - cc; + /* Buffers should be ok again, release possible block. */ + if (cc >= zst->zst_r_lowat) { + if (ISSET(zst->zst_rx_flags, RX_IBUF_OVERFLOWED)) { + CLR(zst->zst_rx_flags, RX_IBUF_OVERFLOWED); + SET(cs->cs_preg[1], ZSWR1_RIE); + cs->cs_creg[1] = cs->cs_preg[1]; + zs_write_reg(cs, 1, cs->cs_creg[1]); + } + if (ISSET(zst->zst_rx_flags, RX_IBUF_BLOCKED)) { + CLR(zst->zst_rx_flags, RX_IBUF_BLOCKED); + zs_hwiflow(zst); + } + } + splx(s); + } +} + +void +zstty_txsoft(zst, tp) + struct zstty_softc *zst; + struct tty *tp; +{ + + CLR(tp->t_state, TS_BUSY); + if (ISSET(tp->t_state, TS_FLUSH)) + CLR(tp->t_state, TS_FLUSH); + else + ndflush(&tp->t_outq, (int)(zst->zst_tba - tp->t_outq.c_cf)); + (*linesw[tp->t_line].l_start)(tp); +} + +void +zstty_stsoft(zst, tp) + struct zstty_softc *zst; + struct tty *tp; +{ + struct zs_chanstate *cs = zst->zst_cs; + u_char rr0, delta; + int s; + + s = splzs(); + rr0 = cs->cs_rr0; + delta = cs->cs_rr0_delta; + cs->cs_rr0_delta = 0; + splx(s); + + if (ISSET(delta, cs->cs_rr0_dcd)) { + /* + * Inform the tty layer that carrier detect changed. + */ + (void) (*linesw[tp->t_line].l_modem)(tp, ISSET(rr0, ZSRR0_DCD)); + } + + if (ISSET(delta, cs->cs_rr0_cts)) { + /* Block or unblock output according to flow control. */ + if (ISSET(rr0, cs->cs_rr0_cts)) { + zst->zst_tx_stopped = 0; + (*linesw[tp->t_line].l_start)(tp); + } else { + zst->zst_tx_stopped = 1; + } + } +} + +/* + * Software interrupt. Called at zssoft + * + * The main job to be done here is to empty the input ring + * by passing its contents up to the tty layer. The ring is + * always emptied during this operation, therefore the ring + * must not be larger than the space after "high water" in + * the tty layer, or the tty layer might drop our input. + * + * Note: an "input blockage" condition is assumed to exist if + * EITHER the TS_TBLOCK flag or zst_rx_blocked flag is set. + */ +void +zstty_softint(cs) + struct zs_chanstate *cs; +{ + struct zstty_softc *zst = cs->cs_private; + struct tty *tp = zst->zst_tty; + int s; + + s = spltty(); + + if (zst->zst_rx_ready) { + zst->zst_rx_ready = 0; + zstty_rxsoft(zst, tp); + } + + if (zst->zst_st_check) { + zst->zst_st_check = 0; + zstty_stsoft(zst, tp); + } + + if (zst->zst_tx_done) { + zst->zst_tx_done = 0; + zstty_txsoft(zst, tp); + } + + splx(s); +} + +struct zsops zsops_tty = { + zstty_rxint, /* receive char available */ + zstty_stint, /* external/status */ + zstty_txint, /* xmit buffer empty */ + zstty_softint, /* process software interrupt */ +}; diff --git a/sys/arch/macppc/dev/zs.c b/sys/arch/macppc/dev/zs.c index 4d7cfebdee6..03803abc61b 100644 --- a/sys/arch/macppc/dev/zs.c +++ b/sys/arch/macppc/dev/zs.c @@ -1,4 +1,4 @@ -/* $OpenBSD: zs.c,v 1.6 2002/03/14 01:26:36 millert Exp $ */ +/* $OpenBSD: zs.c,v 1.7 2002/09/06 13:56:51 drahn Exp $ */ /* $NetBSD: zs.c,v 1.17 2001/06/19 13:42:15 wiz Exp $ */ /* @@ -79,15 +79,12 @@ #define ZSMAC_RAW 0x01 #define ZSMAC_LOCALTALK 0x02 -#define PCLK (9600 * 384) - #include "zsc.h" /* get the # of zs chips defined */ /* * Some warts needed by z8530tty.c - */ int zs_def_cflag = (CREAD | CS8 | HUPCL); -int zs_major = 12; /* * abort detection on console will now timeout after iterating on a loop @@ -96,13 +93,6 @@ int zs_major = 12; */ #define ZSABORT_DELAY 3000000 -/* The layout of this is hardware-dependent (padding, order). */ -struct zschan { - volatile u_char zc_csr; /* ctrl,status, and indirect access */ - u_char zc_xxx0[15]; - volatile u_char zc_data; /* data */ - u_char zc_xxx1[15]; -}; struct zsdevice { /* Yes, they are backwards. */ struct zschan zs_chan_b; @@ -128,7 +118,7 @@ int zs_cons_canabort = 0; /* device to which the console is attached--if serial. */ /* Mac stuff */ -static int zs_get_speed(struct zs_chanstate *); +int zs_get_speed(struct zs_chanstate *); /* * Even though zsparam will set up the clock multiples, etc., we @@ -169,6 +159,10 @@ int zsc_match(struct device *, void *, void *); void zsc_attach(struct device *, struct device *, void *); int zsc_print(void *, const char *name); +/* Power management hooks */ +int zs_enable (struct zs_chanstate *); +void zs_disable (struct zs_chanstate *); + struct cfattach zsc_ca = { sizeof(struct zsc_softc), zsc_match, zsc_attach }; @@ -178,7 +172,7 @@ extern struct cfdriver zsc_cd; int zshard(void *); int zssoft(void *); #ifdef ZS_TXDMA -static int zs_txdma_int(void *); +int zs_txdma_int(void *); #endif void zscnprobe(struct consdev *); @@ -224,13 +218,16 @@ zsc_attach(parent, self, aux) struct confargs *ca = aux; struct zsc_attach_args zsc_args; volatile struct zschan *zc; + struct xzs_chanstate *xcs; struct zs_chanstate *cs; struct zsdevice *zsd; - int channel; + int zsc_unit, channel; int s, theflags; int node, intr[3][3]; u_int regs[16]; + zsc_unit = zsc->zsc_dev.dv_unit; + zsd = mapiodev(ca->ca_baseaddr + ca->ca_reg[0], ca->ca_reg[1]); node = OF_child(ca->ca_node); /* ch-a */ @@ -267,8 +264,10 @@ zsc_attach(parent, self, aux) */ for (channel = 0; channel < 2; channel++) { zsc_args.channel = channel; - zsc_args.hwflags = zs_hwflags[0][channel]; - cs = &zsc->zsc_cs[channel]; + zsc_args.hwflags = zs_hwflags[zsc_unit][channel]; + xcs = &zsc->xzsc_xcs_store[channel]; + cs = &xcs->xzs_cs; + zsc->zsc_cs[channel] = cs; cs->cs_channel = channel; cs->cs_private = NULL; @@ -283,12 +282,25 @@ zsc_attach(parent, self, aux) memcpy(cs->cs_preg, zs_init_reg, 16); /* Current BAUD rate generator clock. */ - cs->cs_brg_clk = PCLK / 16; /* RTxC is 230400*16, so use 230400 */ + /* RTxC is 230400*16, so use 230400 */ + cs->cs_brg_clk = PCLK / 16; if (zsc_args.hwflags & ZS_HWFLAG_CONSOLE) cs->cs_defspeed = zs_get_speed(cs); else - cs->cs_defspeed = zs_defspeed[0][channel]; -#ifdef NOTYET + cs->cs_defspeed = + zs_defspeed[zsc_unit][channel]; + cs->cs_defcflag = zs_def_cflag; + + /* Make these correspond to cs_defcflag (-crtscts) */ + cs->cs_rr0_dcd = ZSRR0_DCD; + cs->cs_rr0_cts = 0; + cs->cs_wr5_dtr = ZSWR5_DTR; + cs->cs_wr5_rts = 0; + +#ifdef __notyet__ + cs->cs_slave_type = ZS_SLAVE_NONE; +#endif + /* Define BAUD rate stuff. */ xcs->cs_clocks[0].clk = PCLK; xcs->cs_clocks[0].flags = ZSC_RTXBRG | ZSC_RTXDIV; @@ -316,13 +328,22 @@ zsc_attach(parent, self, aux) xcs->cs_clocks[1].clk = 0; xcs->cs_clocks[2].clk = 0; } + if (xcs->cs_clocks[1].clk) + zsc_args.hwflags |= ZS_HWFLAG_NO_DCD; + if (xcs->cs_clocks[2].clk) + zsc_args.hwflags |= ZS_HWFLAG_NO_CTS; /* Set defaults in our "extended" chanstate. */ xcs->cs_csource = 0; xcs->cs_psource = 0; xcs->cs_cclk_flag = 0; /* Nothing fancy by default */ xcs->cs_pclk_flag = 0; -#endif + + if (theflags & ZSMAC_RAW) { + zsc_args.hwflags |= ZS_HWFLAG_RAW; + printf(" (raw defaults)"); + } + /* * XXX - This might be better done with a "stub" driver * (to replace zstty) that ignores LocalTalk for now. @@ -340,6 +361,16 @@ zsc_attach(parent, self, aux) */ } + /* + * We used to disable chip interrupts here, but we now + * do that in zscnprobe, just in case MacOS left the chip on. + */ + + xcs->cs_chip = 0; + + /* Stash away a copy of the final H/W flags. */ + xcs->cs_hwflags = zsc_args.hwflags; + /* * Look for a child driver for this channel. * The child attach will setup the hardware. @@ -356,27 +387,31 @@ zsc_attach(parent, self, aux) /* XXX - Now safe to install interrupt handlers. */ mac_intr_establish(parent, intr[0][0], IST_LEVEL, IPL_TTY, - zshard, NULL, "zs"); + zshard, NULL, "zs0"); mac_intr_establish(parent, intr[1][0], IST_LEVEL, IPL_TTY, - zshard, NULL, "zs"); + zshard, NULL, "zs1"); #ifdef ZS_TXDMA mac_intr_establish(parent, intr[0][1], IST_LEVEL, IPL_TTY, - zs_txdma_int, (void *)0, "zs"); + zs_txdma_int, (void *)0, "zsdma0"); mac_intr_establish(parent, intr[1][1], IST_LEVEL, IPL_TTY, - zs_txdma_int, (void *)1, "zs"); + zs_txdma_int, (void *)1, "zsdma1"); #endif /* * Set the master interrupt enable and interrupt vector. * (common to both channels, do it on A) */ - cs = &zsc->zsc_cs[0]; + cs = zsc->zsc_cs[0]; s = splzs(); /* interrupt vector */ zs_write_reg(cs, 2, zs_init_reg[2]); /* master interrupt control (enable) */ zs_write_reg(cs, 9, zs_init_reg[9]); splx(s); + + /* connect power management for port 0 */ + cs->enable = zs_enable; + cs->disable = zs_disable; } int @@ -445,7 +480,7 @@ zshard(arg) if (zsc == NULL) continue; rval |= zsc_intr_hard(zsc); - if (zsc->zsc_cs->cs_softreq) + if (zsc->zsc_cs[0]->cs_softreq) { /* zsc_req_softint(zsc); */ /* We are at splzs here, so no need to lock. */ @@ -555,6 +590,247 @@ zs_get_speed(cs) return TCONST_TO_BPS(cs->cs_brg_clk, tconst); } +#ifndef ZS_TOLERANCE +#define ZS_TOLERANCE 51 +/* 5% in tenths of a %, plus 1 so that exactly 5% will be ok. */ +#endif + +/* + * Search through the signal sources in the channel, and + * pick the best one for the baud rate requested. Return + * a -1 if not achievable in tolerance. Otherwise return 0 + * and fill in the values. + * + * This routine draws inspiration from the Atari port's zs.c + * driver in NetBSD 1.1 which did the same type of source switching. + * Tolerance code inspired by comspeed routine in isa/com.c. + * + * By Bill Studenmund, 1996-05-12 + */ +int +zs_set_speed(cs, bps) + struct zs_chanstate *cs; + int bps; /* bits per second */ +{ + struct xzs_chanstate *xcs = (void *)cs; + int i, tc, tc0 = 0, tc1, s, sf = 0; + int src, rate0, rate1, err, tol; + + if (bps == 0) + return (0); + + src = -1; /* no valid source yet */ + tol = ZS_TOLERANCE; + + /* + * Step through all the sources and see which one matches + * the best. A source has to match BETTER than tol to be chosen. + * Thus if two sources give the same error, the first one will be + * chosen. Also, allow for the possability that one source might run + * both the BRG and the direct divider (i.e. RTxC). + */ + for (i = 0; i < xcs->cs_clock_count; i++) { + if (xcs->cs_clocks[i].clk <= 0) + continue; /* skip non-existent or bad clocks */ + if (xcs->cs_clocks[i].flags & ZSC_BRG) { + /* check out BRG at /16 */ + tc1 = BPS_TO_TCONST(xcs->cs_clocks[i].clk >> 4, bps); + if (tc1 >= 0) { + rate1 = TCONST_TO_BPS(xcs->cs_clocks[i].clk >> 4, tc1); + err = abs(((rate1 - bps)*1000)/bps); + if (err < tol) { + tol = err; + src = i; + sf = xcs->cs_clocks[i].flags & ~ZSC_DIV; + tc0 = tc1; + rate0 = rate1; + } + } + } + if (xcs->cs_clocks[i].flags & ZSC_DIV) { + /* + * Check out either /1, /16, /32, or /64 + * Note: for /1, you'd better be using a synchronized + * clock! + */ + int b0 = xcs->cs_clocks[i].clk, e0 = abs(b0-bps); + int b1 = b0 >> 4, e1 = abs(b1-bps); + int b2 = b1 >> 1, e2 = abs(b2-bps); + int b3 = b2 >> 1, e3 = abs(b3-bps); + + if (e0 < e1 && e0 < e2 && e0 < e3) { + err = e0; + rate1 = b0; + tc1 = ZSWR4_CLK_X1; + } else if (e0 > e1 && e1 < e2 && e1 < e3) { + err = e1; + rate1 = b1; + tc1 = ZSWR4_CLK_X16; + } else if (e0 > e2 && e1 > e2 && e2 < e3) { + err = e2; + rate1 = b2; + tc1 = ZSWR4_CLK_X32; + } else { + err = e3; + rate1 = b3; + tc1 = ZSWR4_CLK_X64; + } + + err = (err * 1000)/bps; + if (err < tol) { + tol = err; + src = i; + sf = xcs->cs_clocks[i].flags & ~ZSC_BRG; + tc0 = tc1; + rate0 = rate1; + } + } + } +#ifdef ZSMACDEBUG + zsprintf("Checking for rate %d. Found source #%d.\n",bps, src); +#endif + if (src == -1) + return (EINVAL); /* no can do */ + + /* + * The M.I. layer likes to keep cs_brg_clk current, even though + * we are the only ones who should be touching the BRG's rate. + * + * Note: we are assuming that any ZSC_EXTERN signal source comes in + * on the RTxC pin. Correct for the mac68k obio zsc. + */ + if (sf & ZSC_EXTERN) + cs->cs_brg_clk = xcs->cs_clocks[i].clk >> 4; + else + cs->cs_brg_clk = PCLK / 16; + + /* + * Now we have a source, so set it up. + */ + s = splzs(); + xcs->cs_psource = src; + xcs->cs_pclk_flag = sf; + bps = rate0; + if (sf & ZSC_BRG) { + cs->cs_preg[4] = ZSWR4_CLK_X16; + cs->cs_preg[11]= ZSWR11_RXCLK_BAUD | ZSWR11_TXCLK_BAUD; + if (sf & ZSC_PCLK) { + cs->cs_preg[14] = ZSWR14_BAUD_ENA | ZSWR14_BAUD_FROM_PCLK; + } else { + cs->cs_preg[14] = ZSWR14_BAUD_ENA; + } + tc = tc0; + } else { + cs->cs_preg[4] = tc0; + if (sf & ZSC_RTXDIV) { + cs->cs_preg[11] = ZSWR11_RXCLK_RTXC | ZSWR11_TXCLK_RTXC; + } else { + cs->cs_preg[11] = ZSWR11_RXCLK_TRXC | ZSWR11_TXCLK_TRXC; + } + cs->cs_preg[14]= 0; + tc = 0xffff; + } + /* Set the BAUD rate divisor. */ + cs->cs_preg[12] = tc; + cs->cs_preg[13] = tc >> 8; + splx(s); + +#ifdef ZSMACDEBUG + zsprintf("Rate is %7d, tc is %7d, source no. %2d, flags %4x\n", \ + bps, tc, src, sf); + zsprintf("Registers are: 4 %x, 11 %x, 14 %x\n\n", + cs->cs_preg[4], cs->cs_preg[11], cs->cs_preg[14]); +#endif + + cs->cs_preg[5] |= ZSWR5_RTS; /* Make sure the drivers are on! */ + + /* Caller will stuff the pending registers. */ + return (0); +} + +int +zs_set_modes(cs, cflag) + struct zs_chanstate *cs; + int cflag; /* bits per second */ +{ + struct xzs_chanstate *xcs = (void*)cs; + int s; + + /* + * Make sure we don't enable hfc on a signal line we're ignoring. + * As we enable CTS interrupts only if we have CRTSCTS or CDTRCTS, + * this code also effectivly turns off ZSWR15_CTS_IE. + * + * Also, disable DCD interrupts if we've been told to ignore + * the DCD pin. Happens on mac68k because the input line for + * DCD can also be used as a clock input. (Just set CLOCAL.) + * + * If someone tries to turn an invalid flow mode on, Just Say No + * (Suggested by gwr) + */ + if (xcs->cs_hwflags & ZS_HWFLAG_NO_DCD) { + if (cflag & MDMBUF) + printf(" opps\n"); + if (cflag & MDMBUF) + return (EINVAL); + cflag |= CLOCAL; + } +#if 0 + if ((xcs->cs_hwflags & ZS_HWFLAG_NO_CTS) && (cflag & CRTSCTS)) + return (EINVAL); +#endif + + /* + * Output hardware flow control on the chip is horrendous: + * if carrier detect drops, the receiver is disabled, and if + * CTS drops, the transmitter is stoped IN MID CHARACTER! + * Therefore, NEVER set the HFC bit, and instead use the + * status interrupt to detect CTS changes. + */ + s = splzs(); + if ((cflag & (CLOCAL | MDMBUF)) != 0) + cs->cs_rr0_dcd = 0; + else + cs->cs_rr0_dcd = ZSRR0_DCD; + /* + * The mac hardware only has one output, DTR (HSKo in Mac + * parlance). In HFC mode, we use it for the functions + * typically served by RTS and DTR on other ports, so we + * have to fake the upper layer out some. + * + * CRTSCTS we use CTS as an input which tells us when to shut up. + * We make no effort to shut up the other side of the connection. + * DTR is used to hang up the modem. + * + * In CDTRCTS, we use CTS to tell us to stop, but we use DTR to + * shut up the other side. + */ + if ((cflag & CRTSCTS) != 0) { + cs->cs_wr5_dtr = ZSWR5_DTR; + cs->cs_wr5_rts = 0; + cs->cs_rr0_cts = ZSRR0_CTS; +#if 0 + } else if ((cflag & CDTRCTS) != 0) { + cs->cs_wr5_dtr = 0; + cs->cs_wr5_rts = ZSWR5_DTR; + cs->cs_rr0_cts = ZSRR0_CTS; +#endif + } else if ((cflag & MDMBUF) != 0) { + cs->cs_wr5_dtr = 0; + cs->cs_wr5_rts = ZSWR5_DTR; + cs->cs_rr0_cts = ZSRR0_DCD; + } else { + cs->cs_wr5_dtr = ZSWR5_DTR; + cs->cs_wr5_rts = 0; + cs->cs_rr0_cts = 0; + } + splx(s); + + /* Caller will stuff the pending registers. */ + return (0); +} + + /* * Read or write the chip with suitable delays. * MacII hardware has the delay built in. @@ -627,6 +903,33 @@ void zs_write_data(cs, val) ZS_DELAY(); } +/* + * Power management hooks for zsopen() and zsclose(). + * We use them to power on/off the ports, if necessary. + * This should be modified to turn on/off modem in PBG4, etc. + */ +void macobio_modem_power(int enable); +int zs_enable(struct zs_chanstate *cs); +void zs_disable(struct zs_chanstate *cs); + +int +zs_enable(cs) + struct zs_chanstate *cs; +{ + macobio_modem_power(1); /* Whee */ + cs->enabled = 1; + return(0); +} + +void +zs_disable(cs) + struct zs_chanstate *cs; +{ + macobio_modem_power(0); /* Whee */ + cs->enabled = 0; +} + + /**************************************************************** * Console support functions (powermac specific!) * Note: this code is allowed to know about the layout of @@ -635,11 +938,10 @@ void zs_write_data(cs, val) * XXX - Well :-P :-) -wrs ****************************************************************/ -#define zscnpollc nullcnpollc cons_decl(zs); -static void zs_putc(register volatile struct zschan *, int); -static int zs_getc(register volatile struct zschan *); +void zs_putc(register volatile struct zschan *, int); +int zs_getc(register volatile struct zschan *); extern int zsopen( dev_t dev, int flags, int mode, struct proc *p); static int stdin, stdout; @@ -753,24 +1055,13 @@ zscnputc(dev, c) } } -extern int ofccngetc(dev_t); -extern void ofccnputc(dev_t, int); - -struct consdev consdev_zs = { - zscnprobe, - zscninit, - zscngetc, - zscnputc, - zscnpollc, - NULL, -}; - void zscnprobe(cp) struct consdev *cp; { int chosen, pkg; int unit = 0; + int maj; char name[16]; if ((chosen = OF_finddevice("/chosen")) == -1) @@ -798,15 +1089,22 @@ zscnprobe(cp) if (strcmp(name, "ch-b") == 0) unit = 1; - cp->cn_dev = makedev(zs_major, unit); + /* locate the major number */ + for (maj = 0; maj < nchrdev; maj++) + if (cdevsw[maj].d_open == zsopen) + break; + + cp->cn_dev = makedev(maj, unit); cp->cn_pri = CN_REMOTE; } + void zscninit(cp) struct consdev *cp; { - int escc, escc_ch, obio, zs_offset, zs_size; + int escc, escc_ch, obio; + unsigned int zs_offset, zs_size; int ch = 0; u_int32_t reg[5]; char name[16]; @@ -821,7 +1119,7 @@ zscninit(cp) if (strcmp(name, "ch-b") == 0) ch = 1; - if (OF_getprop(escc_ch, "reg", reg, sizeof(reg)) < 4) + if (OF_getprop(escc_ch, "reg", reg, sizeof(reg)) < 8) return; zs_offset = reg[0]; zs_size = reg[1]; @@ -837,7 +1135,29 @@ zscninit(cp) } void -zs_abort() +zs_abort(struct zs_chanstate *channel) { } + +/* copied from sparc - XXX? */ +void +zscnpollc(dev, on) + dev_t dev; + int on; +{ + /* + * Need to tell zs driver to acknowledge all interrupts or we get + * annoying spurious interrupt messages. This is because mucking + * with spl() levels during polling does not prevent interrupts from + * being generated. + */ + +#if 0 + if (on) + swallow_zsintrs++; + else + swallow_zsintrs--; +#endif +} + diff --git a/sys/arch/macppc/include/z8530var.h b/sys/arch/macppc/include/z8530var.h index cb0fe2bd2ed..157d03dc5fe 100644 --- a/sys/arch/macppc/include/z8530var.h +++ b/sys/arch/macppc/include/z8530var.h @@ -1,5 +1,4 @@ -/* $OpenBSD: z8530var.h,v 1.2 2002/03/14 01:26:36 millert Exp $ */ -/* $NetBSD: z8530var.h,v 1.1 1998/05/15 10:15:57 tsubai Exp $ */ +/* $NetBSD: z8530var.h,v 1.5 2002/03/17 19:40:45 atatat Exp $ */ /* * Copyright (c) 1994 Gordon W. Ross @@ -46,8 +45,7 @@ * @(#)zsvar.h 8.1 (Berkeley) 6/11/93 */ -#include -#include +#include #include /* @@ -98,7 +96,9 @@ struct xzs_chanstate { struct zsc_softc { struct device zsc_dev; /* required first: base device */ - struct zs_chanstate zsc_cs[2]; /* channel A and B soft state */ + struct zs_chanstate *zsc_cs[2]; /* channel A and B soft state */ + /* Machine-dependent part follows... */ + struct xzs_chanstate xzsc_xcs_store[2]; dbdma_regmap_t *zsc_txdmareg[2]; dbdma_command_t *zsc_txdmacmd[2]; /* XXX tx only, for now */ @@ -116,28 +116,40 @@ struct zsc_softc { * XXX - no one seems to want to try and check this -wrs */ -u_char zs_read_reg(struct zs_chanstate *cs, u_char reg); -u_char zs_read_csr(struct zs_chanstate *cs); -u_char zs_read_data(struct zs_chanstate *cs); +u_char zs_read_reg __P((struct zs_chanstate *cs, u_char reg)); +u_char zs_read_csr __P((struct zs_chanstate *cs)); +u_char zs_read_data __P((struct zs_chanstate *cs)); -void zs_write_reg(struct zs_chanstate *cs, u_char reg, u_char val); -void zs_write_csr(struct zs_chanstate *cs, u_char val); -void zs_write_data(struct zs_chanstate *cs, u_char val); +void zs_write_reg __P((struct zs_chanstate *cs, u_char reg, u_char val)); +void zs_write_csr __P((struct zs_chanstate *cs, u_char val)); +void zs_write_data __P((struct zs_chanstate *cs, u_char val)); /* XXX - Could define splzs() here instead of in psl.h */ #define splzs spltty /* Hook for MD ioctl support */ -int zsmdioctl(struct zs_chanstate *cs, u_long cmd, caddr_t data); +int zsmdioctl __P((struct zs_chanstate *cs, u_long cmd, caddr_t data)); /* XXX - This is a bit gross... */ -#define ZS_MD_IOCTL zsmdioctl(cs, cmd, data) +/* +#define ZS_MD_IOCTL(cs, cmd, data) zsmdioctl(cs, cmd, data) +*/ /* Callback for "external" clock sources */ -void zsmd_setclock(struct zs_chanstate *cs); +void zsmd_setclock __P((struct zs_chanstate *cs)); #define ZS_MD_SETCLK(cs) zsmd_setclock(cs) -#define zsc_req_softint(zsc) (void)(zsc) +#define PCLK (9600 * 384) /* PCLK pin input clock rate */ -void zs_abort(void); +/* The layout of this is hardware-dependent (padding, order). */ +struct zschan { + volatile u_char zc_csr; /* ctrl,status, and indirect access */ + u_char zc_xxx0[15]; + volatile u_char zc_data; /* data */ + u_char zc_xxx1[15]; +}; +void zs_kgdb_init (void); -#define ZSTTY_MAJOR 7 +#ifndef ZSCCF_CHANNEL +#define ZSCCF_CHANNEL 0 +#define ZSCCF_CHANNEL_DEFAULT -1 +#endif diff --git a/sys/arch/macppc/macppc/conf.c b/sys/arch/macppc/macppc/conf.c index 51cb832a693..1b5afa73b0e 100644 --- a/sys/arch/macppc/macppc/conf.c +++ b/sys/arch/macppc/macppc/conf.c @@ -1,4 +1,4 @@ -/* $OpenBSD: conf.c,v 1.16 2002/07/10 22:08:47 mickey Exp $ */ +/* $OpenBSD: conf.c,v 1.17 2002/09/06 13:56:51 drahn Exp $ */ /* * Copyright (c) 1997 Per Fogelstrom @@ -368,12 +368,16 @@ blktochr(dev) #include "vgafb_pci.h" cons_decl(ws); +cons_decl(zs); cons_decl(ofc); struct consdev constab[] = { #if NWSDISPLAY > 0 cons_init(ws), #endif +#if NZSTTY > 0 + cons_init(zs), +#endif #if NOFCONS > 0 cons_init(ofc), #endif diff --git a/sys/arch/macppc/macppc/ofw_machdep.c b/sys/arch/macppc/macppc/ofw_machdep.c index 02a61092e67..4a0fe7377a2 100644 --- a/sys/arch/macppc/macppc/ofw_machdep.c +++ b/sys/arch/macppc/macppc/ofw_machdep.c @@ -1,4 +1,4 @@ -/* $OpenBSD: ofw_machdep.c,v 1.12 2002/08/20 02:50:43 drahn Exp $ */ +/* $OpenBSD: ofw_machdep.c,v 1.13 2002/09/06 13:56:51 drahn Exp $ */ /* $NetBSD: ofw_machdep.c,v 1.1 1996/09/30 16:34:50 ws Exp $ */ /* @@ -369,15 +369,18 @@ ofwconprobe() return; } if (strcmp(type, "serial") == 0) { - /* serial console not supported, forcing to screen for now */ - OF_stdout = OF_open("screen"); - OF_stdin = OF_open("keyboard"); - - /* cross fingers that this works. */ - of_display_console(); +#if NZSTTY > 0 + /* zscnprobe/zscninit do all the required initialization */ return; +#endif } + OF_stdout = OF_open("screen"); + OF_stdin = OF_open("keyboard"); + + /* cross fingers that this works. */ + of_display_console(); + return; } diff --git a/sys/arch/macppc/pci/macobio.c b/sys/arch/macppc/pci/macobio.c index 32411cc17f3..8a5edc7b17c 100644 --- a/sys/arch/macppc/pci/macobio.c +++ b/sys/arch/macppc/pci/macobio.c @@ -1,4 +1,4 @@ -/* $OpenBSD: macobio.c,v 1.4 2002/03/14 03:15:56 millert Exp $ */ +/* $OpenBSD: macobio.c,v 1.5 2002/09/06 13:56:51 drahn Exp $ */ /* $NetBSD: obio.c,v 1.6 1999/05/01 10:36:08 tsubai Exp $ */ /*- @@ -57,6 +57,8 @@ struct macobio_softc { struct device sc_dev; int sc_node; struct ppc_bus_space sc_membus_space; + int sc_id; /* copy of the PCI pa_id */ + u_int8_t *obiomem; }; struct cfdriver macobio_cd = { NULL, "macobio", DV_DULL, @@ -110,6 +112,8 @@ macobio_attach(parent, self, aux) char name[32]; int need_interrupt_controller = 0; + sc->sc_id = pa->pa_id; /* save of type for later */ + switch (PCI_PRODUCT(pa->pa_id)) { /* XXX should not use name */ @@ -141,6 +145,11 @@ macobio_attach(parent, self, aux) node = OF_finddevice("mac-io"); if (node == -1) node = OF_finddevice("/pci/mac-io"); + if (OF_getprop(node, "assigned-addresses", reg, sizeof(reg)) + == (sizeof (reg[0]) * 5)) + { + sc->obiomem = mapiodev(reg[2], 0x100); + } break; default: @@ -271,3 +280,31 @@ mac_intr_disestablish(lcp, arg) { (*mac_intr_disestablish_func)(lcp, arg); } + +void macobio_modem_power(int enable); +void +macobio_modem_power(int enable) +{ + u_int32_t val; + struct macobio_softc *sc = macobio_cd.cd_devs[0]; + if (PCI_PRODUCT(sc->sc_id) == PCI_PRODUCT_APPLE_KEYLARGO) { + val = in32rb(sc->obiomem + 0x40); + if (enable) + val = val & ~((u_int32_t)1<<25); + else + val = val | ((u_int32_t)1<<25); + out32rb(sc->obiomem + 0x40, val); + } + if (PCI_PRODUCT(sc->sc_id) == PCI_PRODUCT_APPLE_PANGEA_MACIO) { + if (enable) { + /* set reset */ + out8(sc->obiomem + 0x006a + 0x03, 0x04); + /* power modem on */ + out8(sc->obiomem + 0x006a + 0x02, 0x04); + /* unset reset */ + out8(sc->obiomem + 0x006a + 0x03, 0x05); + } else { + /* disable it how? */ + } + } +} -- cgit v1.2.3