.\" $OpenBSD: chio.1,v 1.32 2013/07/15 23:43:58 schwarze Exp $ .\" $NetBSD: chio.1,v 1.1.1.1 1996/04/03 00:34:38 thorpej Exp $ .\" .\" Copyright (c) 1996 Jason R. Thorpe .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgments: .\" This product includes software developed by Jason R. Thorpe .\" for And Communications, http://www.and.com/ .\" 4. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, .\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; .\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED .\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, .\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .Dd $Mdocdate: July 15 2013 $ .Dt CHIO 1 .Os .Sh NAME .Nm chio .Nd medium changer control utility .Sh SYNOPSIS .Nm chio .Op Fl f Ar changer .Ar command .Op Ar arg ... .Sh DESCRIPTION The .Nm utility is used to control the operation of medium changers, such as those found in tape and optical disk jukeboxes. .Pp The options are as follows: .Bl -tag -width 10n .It Fl f Ar changer Use the device .Ar changer rather than the default device .Pa /dev/ch0 . .El .Pp A medium changer apparatus is made up of .Em elements . There are five element types: .Em picker (medium transport), .Em slot (storage), .Em portal (import/export), .Em drive (data transfer), and .Em voltag (select by volume identifier). The .Em voltag pseudo-element type allows the selection of tapes by their volume code, which is typically a barcode on the tape. In this command description, the shorthand .Sq ET will be used to represent an element type, and .Sq EU will be used to represent an element unit. For example, to represent the first robotic arm in the changer, the ET would be .Dq picker and the EU would be .Dq 0 . .Pp The following commands are supported: .Bl -tag -width Ds .It Xo .Cm exchange .Ar src-ET src-EU dst1-ET dst1-EU .Op Ar dst2-ET dst2-EU .Op Cm inv1 .Op Cm inv2 .Xc Performs a media unit exchange operation. The media unit in .Ar src-ET Ns / Ns Ar src-EU is moved to .Ar dst1-ET Ns / Ns Ar dst1-EU and the media unit previously in .Ar dst1-ET Ns / Ns Ar dst1-EU is moved to .Ar dst2-ET Ns / Ns Ar dst2-EU . In the case of a simple exchange, .Ar dst2-ET Ns / Ns Ar dst2-EU is omitted and the values .Ar src-ET Ns / Ns Ar src-EU are used in their place. The optional modifiers .Cm inv1 and .Cm inv2 specify whether the media units are to be inverted before insertion into .Ar dst1-ET Ns / Ns Ar dst2-EU and .Ar dst2-ET Ns / Ns Ar dst2-EU respectively. .Pp Note that not all medium changers support the .Cm exchange operation; the changer must have multiple free pickers or emulate multiple free pickers with transient storage. .It Cm getpicker Report which picker unit the changer is currently configured to use. .It Xo .Cm move .Ar from-ET from-EU to-ET to-EU .Op Cm inv .Xc Moves the media unit from .Ar from-ET Ns / Ns Ar from-EU to .Ar to-ET Ns / Ns Ar to-EU . If the optional modifier .Cm inv is specified, the media unit will be inverted before insertion. If .Em from-ET is a drive, .Nm will first attempt to open and perform an .Dv MTOFFL operation on the .Xr st 4 device corresponding to .Ar from-EU . By default, the .Xr st 4 device .No /dev/rst Ns Ar X is used, where .Ar X is the .Ar from-EU . This mapping can be changed by using the .Xr chio.conf 5 file. .It Cm params Report the number of slots, drives, pickers, and portals in the changer, and which picker unit the changer is currently configured to use. .It Cm position Ar to-ET to-EU Op Cm inv Position the picker in front of the element described by .Ar to-ET Ns / Ns Ar to-EU . If the optional modifier .Cm inv is specified, the media unit will be inverted before insertion. .Pp Note that not all changers behave as expected in response to this command. .It Cm setpicker Ar unit Configure the changer to use picker .Ar unit . .It Cm status .Op Fl vVa .Op Ar ET Report the status of all elements in the changer. If .Ar ET is specified, report the status of all elements of type .Ar ET . .Bl -tag -width Ds .It Fl v Print the primary volume tag for each loaded medium, if any. The volume tag is printed as .Dq \*(LtLABEL:SERIAL\*(Gt . .It Fl V Print the alternate volume tag for each loaded medium, if any. .It Fl a Print all additional information (as in .Fl vV ) . .El .Pp The status bits output are defined as follows: .Bl -tag -width indent .It Dv FULL Element contains a media unit. .It Dv IMPEXP Media was deposited into element by an outside human operator. .It Dv EXCEPT Element is in an abnormal state. .It Dv ACCESS Media in this element is accessible by a picker. .It Dv EXENAB Element supports passing media (exporting) to an outside human operator. .It Dv INENAB Element supports receiving media (importing) from an outside human operator. .El .El .Sh ENVIRONMENT .Bl -tag -width CHANGER .It Ev CHANGER The default changer may be overridden by setting this environmental variable to the desired changer device. .El .Sh FILES .Bl -tag -width "/etc/chio.confXX" .It Pa /dev/ch0 Default changer device. .It Pa /etc/chio.conf Optional configuration file to set up a non-default mapping between .Xr st 4 devices and changer drives. .El .Sh EXAMPLES Move the media in slot 3 (fourth slot) to drive 0 (first drive): .Pp .Dl # chio move slot 3 drive 0 .Pp Move the media with volume tag 000007L2 to drive 1 (second drive): .Pp .Dl # chio move voltag 00007L2 drive 1 .Pp Configure the changer to use picker 2 (third picker) for operations: .Pp .Dl # chio setpicker 2 .Sh SEE ALSO .Xr mt 1 , .Xr ch 4 , .Xr st 4 , .Xr chio.conf 5 .Sh AUTHORS The .Nm program and .Tn SCSI changer driver were written by .An Jason R. Thorpe Aq Mt thorpej@and.com for And Communications .Pq Lk http://www.and.com/ .