#	$OpenBSD: install.md,v 1.4 1997/05/18 13:15:09 niklas Exp $
#	$NetBSD: install.md,v 1.3.2.5 1996/08/26 15:45:28 gwr Exp $
#
#
# Copyright (c) 1996 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Jason R. Thorpe.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#        This product includes software developed by the NetBSD
#        Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

#
# machine dependent section of installation/upgrade script.
#

# Machine-dependent install sets
MDSETS="kernel"
MSGBUF=/kern/msgbuf
HOSTNAME=/kern/hostname

# an alias for hostname(1)
hostname() {
	if [ -x /bin/hostname ]; then
		/bin/hostname $1
	else
		if [ -z "$1" ]; then
			cat $HOSTNAME
		else
			echo $1 > $HOSTNAME
		fi
	fi
}

md_set_term() {
	if [ ! -z "$TERM" ]; then
		return
	fi
	echo -n "Specify terminal type [vt220]: "
	getresp "vt220"
	TERM="$resp"
	export TERM
}

md_makerootwritable() {
	# This is done in .profile now
}

md_machine_arch() {
	cat /kern/machine
}

md_get_diskdevs() {
	# return available disk devices
	sed -n -e '/^[sw]d[0-9] /{s/ .*//;p;}' < $MSGBUF
}

md_get_cddevs() {
	# return available CDROM devices
	sed -n -e '/^a\{0,1\}cd[0-9] /{s/ .*//;p;}' < $MSGBUF
}

md_get_ifdevs() {
	# return available network devices
	sed -n -e '/^[al]e[0-9] /{s/ .*//;p;}' -e '/^qn[0-9] /{s/ .*//;p;}' \
	    -e '/^\(isa\)\{0,1\}ed[0-9] /{s/ .*//;p;}' \
	    -e '/^bah[0-9] /{s/ .*//;p;}' -e '/^es[0-9] /{s/ .*//;p;}' \
	    < $MSGBUF
}

md_get_partition_range() {
    # return range of valid partition letters
    echo "[a-p]"
}

md_installboot() {
	# Nothing needed
}

md_native_fstype() {
	echo "ados"
}

md_native_fsopts() {
	echo "ro"
}

md_checkfordisklabel() {
	# $1 is the disk to check
	local rval

	disklabel $1 > /dev/null 2> /tmp/checkfordisklabel
	if grep "no disk label" /tmp/checkfordisklabel; then
		rval=1
	elif grep "disk label corrupted" /tmp/checkfordisklabel; then
		rval=2
	else
		rval=0
	fi

	rm -f /tmp/checkfordisklabel
	return $rval
}

md_prep_disklabel()
{
	local _disk

	_disk=$1
	md_checkfordisklabel $_disk
	case $? in
	0)
		;;
	1)
		echo "ERROR: Disk $_disk is not partitioned, read the"
		echo "preparation document on how to go about doing this."
		;;
	2)
		echo "WARNING: Label on disk $_disk is corrupted.  Maybe"
		echo "you should interrupt the install process and recheck"
		echo "your disk partitioning in AmigaOS?"
		;;
	esac
}

md_copy_kernel() {
	# We use a "kernel" set instead
}

md_welcome_banner() {
{
	if [ "$MODE" = "install" ]; then
		echo ""
		echo "Welcome to the OpenBSD/amiga ${VERSION} installation program."
		cat << \__welcome_banner_1

This program is designed to help you put OpenBSD on your disk,
in a simple and rational way.  You'll be asked several questions,
and it would probably be useful to have your disk's hardware
manual, the installation notes, and a calculator handy.
__welcome_banner_1

	else
		echo ""
		echo "Welcome to the OpenBSD/amiga ${VERSION} upgrade program."
		cat << \__welcome_banner_2

This program is designed to help you upgrade your OpenBSD system in a
simple and rational way.

As a reminder, installing the `etc' binary set is NOT recommended.
Once the rest of your system has been upgraded, you should manually
merge any changes to files in the `etc' set into those files which
already exist on your system.
__welcome_banner_2
	fi

cat << \__welcome_banner_3

As with anything which modifies your disk's contents, this
program can cause SIGNIFICANT data loss, and you are advised
to make sure your data is backed up before beginning the
installation process.

Default answers are displayed in brackets after the questions.
You can hit Control-C at any time to quit, but if you do so at a
prompt, you may have to hit return.  Also, quitting in the middle of
installation may leave your system in an inconsistent state.

__welcome_banner_3
} | more
}

md_not_going_to_install() {
	cat << \__not_going_to_install_1

OK, then.  Enter `halt' at the prompt to halt the machine.  Once the
machine has halted, power-cycle the system and you'll get back to AmigaOS.

__not_going_to_install_1
}

md_congrats() {
	local what;
	if [ "$MODE" = "install" ]; then
		what="installed";
	else
		what="upgraded";
	fi
	cat << __congratulations_1

CONGRATULATIONS!  You have successfully $what OpenBSD!
To boot the installed system, enter halt at the command prompt. Once the
system has halted, reset the machine, enter AmigaOS and boot via loadbsd
without the -b flag, per the install document.

__congratulations_1
}