#       $OpenBSD: install.md,v 1.17 2002/05/20 16:53:57 krw Exp $
# Copyright (c) 1996 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Jason R. Thorpe.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#        This product includes software developed by the NetBSD
#        Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
#
# machine dependent section of installation/upgrade script.
#
#

# Machine-dependent install sets
MDSETS=kernel
MDTERM=vt100
ARCH=ARCH

md_set_term() {
}

md_get_ifdevs() {
	# return available network devices
	dmesg | egrep "(^ie[0-9] )|(^le[0-9] )" | cut -d" " -f1 | sort -u
}

md_installboot() {
	local _rawdev

	if [ "X${1}" = X"" ]; then
		echo "No disk device specified, you must run installboot manually."
		return
	fi
	_rawdev=/dev/r${1}a

	# use extracted mdec if it exists (may be newer)
	if [ -d /mnt/usr/mdec ]; then
		cp /mnt/usr/mdec/bootsd /mnt/bootsd
		/mnt/usr/mdec/installboot -v /mnt/bootsd /mnt/usr/mdec/bootxx _rawdev
	elif [ -d /usr/mdec ]; then
		cp /usr/mdec/bootsd /mnt/bootsd
		/usr/mdec/installboot -v /mnt/bootsd /usr/mdec/bootxx _rawdev
	else
		echo "No boot block prototypes found, you must run installboot manually."
	fi
}
md_labeldisk() {
	echo "huh"
}


md_checkfordisklabel() {
	# $1 is the disk to check
	local rval

	disklabel $1 >> /dev/null 2> /tmp/checkfordisklabel
	if grep "no disk label" /tmp/checkfordisklabel; then
		rval=1
	elif grep "disk label corrupted" /tmp/checkfordisklabel; then
		rval=2
	else
		rval=0
	fi

	rm -f /tmp/checkfordisklabel
	return $rval
}

md_prep_disklabel()
{
	local _disk

	_disk=$1
	md_checkfordisklabel $_disk
	case $? in
	0)	ask "Do you wish to edit the disklabel on $_disk?" y
		;;
	1)	echo "WARNING: Disk $_disk has no label"
		ask "Do you want to create one with the disklabel editor?" y
		;;
	2)	echo "WARNING: Label on disk $_disk is corrupted"
		ask "Do you want to try and repair the damage using the disklabel editor?" y
		;;
	esac

	case "$resp" in
	y*|Y*)	;;
	*)	return ;;
	esac

	# display example
	cat << __EOT

Here is an example of what the partition information will look like once
you have entered the disklabel editor. Disk partition sizes and offsets
are in sector (most likely 512 bytes) units. Make sure these size/offset
pairs are on cylinder boundaries (the number of sector per cylinder is
given in the 'sectors/cylinder' entry, which is not shown here).

Do not change any parameters except the partition layout and the label name.
It's probably also wisest not to touch the '16 partitions:' line, even
in case you have defined less than sixteen partitions.

[Example]
16 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:    50176        0    4.2BSD     1024  8192    16   # (Cyl.    0 - 111)
  b:    64512    50176      swap                        # (Cyl.  112 - 255)
  c:   640192        0   unknown                        # (Cyl.    0 - 1428)
  d:   525504   114688    4.2BSD     1024  8192    16   # (Cyl.  256 - 1428)
[End of example]

__EOT
	ask "Press [Enter] to continue"
	disklabel -W ${_disk}
	disklabel -f /tmp/fstab.${_disk} -E ${_disk}
}

md_congrats() {
}