dnl $OpenBSD: prep,v 1.28 2008/08/06 20:29:49 miod Exp $ OpenBSD/MACHINE requires the SRM console. Some alphas come with the AlphaBIOS (also known as the ARC firmware on older machines) instead; this is what Windows NT uses. It is fairly simple to replace the AlphaBIOS with the SRM firmware. Switching your MACHINE to SRM console: AlphaServer class machines (except for models 300 and 400) and recent enough machines (such as the Miata and later models) have enough flash ROM space to carry both the AlphaBIOS and the SRM console. To switch to SRM from AlphaBIOS, do the following: - enter the AlphaBIOS setup upon startup (F2 key, or Ctrl-B from serial console) - choose "CMOS Setup" from the menu - select "Advanced CMOS Setup" (F6 key, or Ctrl-F from serial console) - change the "Console Selection" setting to "OpenVMS console (SRM)" - confirm your changes with F10 (or Ctrl-U) twice, then enter. - power-cycle your system for the changes to take effect. If you didn't find a "Console Selection" entry (for example on 164SX or 164LX), your system can not hold both the AlphaBIOS and SRM console in flash, and you will have to upgrade your firmware. You can get replacement firmware either from a firmware update CD-ROM, which can be downloaded from ftp://ftp.hp.com/pub/alphaserver/firmware/v73.zip However, this CD-ROM image only supports AlphaServer DS10, DS20, DS20L, and ES40. Firmware update for other models can be picked individually via FTP from ftp://ftp.hp.com/pub/alphaserver/firmware/retired_platforms/ Please refer to http://h18002.www1.hp.com/alphaserver/firmware/index.html for more information. Note that, on most models, upgrading the firmware requires a jumper to be moved on the motherboards; refer to the firmware update instructions for details. AXPpci33 Motherboard specific notes: The 1994 version of the OEM guide has an incorrect pinout for the serial ports. The newer version used to be available at ftp://ftp.digital.com/pub/Digital/axppci/design_guide.ps.Z with a corrected pinout (as well as more information than the 1994 edition). Although ftp.digital.com does not exist anymore, a few copies of this document are scattered accross various ftp servers on the globe, such as ftp://ftp.uniroma2.it/Digital/support/axppci/design_guide.ps.Z Note that there are two flavors of PC serial connectors. If you have the wrong kind, you won't get any output from the serial console. Using the SRM console: This is not intended to be an exhaustive guide on using the SRM firmware console. It should, however, give you enough information to boot OpenBSD/MACHINE. To see a list of devices connected to your alpha, you can use the "show device" command. For booting, the devices you are interested in are "dva0" (the floppy drive) and "dka*" (the disk drives). You can set ROM variables by saying "set VARIABLE VALUE". Some variables you will want to set: auto_action Determines what happens when you turn the power on, halt, or restart your machine. Valid values are: "halt" the system will not autoboot, will restart when rebooted (shutdown -r), and will not restart when halted (shutdown -h). "boot" the system will autoboot on powerup, and when the system is halted (shutdown -h) or rebooted (shutdown -r). "restart" the system will autoboot on powerup, will restart when rebooted (shutdown -r), and will not restart when halted (shutdown -h). Most users will want to set this to "boot". bootdef_dev Default boot device (or list of devices). boot_file Name of the kernel to boot. If this variable is empty, "bsd" will be loaded. Note that this variable does not exist in all versions of the SRM console, in which case you need to always boot manually and specify a kernel filename if it differs from "bsd". boot_osflags Flags to pass to the kernel (there is no need to prefix them with a `-' dash sign). To see a list of all variables on your machine, use the "show" command with no arguments. If there are too many of them, you might want to page with "show | more". You can bypass the boot_file and boot_osflags values from the command prompt, with the -fi (to override boot_file) and -fl (to override boot_osflags) options. For example, boot -fi bsd -fl c dka0 will boot the "bsd" kernel with the "c" flag on dka0. However, some versions of the SRM console (mainly on DEC 3000 series) will only let you specify uppercase filenames. USB support on the XP1000: For some unknown reason, the USB interface found on the XP1000 (and possibly the XP900 and the XP1100) is not enabled unless a specific SRM environment variable is set. If you plan to use USB devices on these machines, enter set usb_enable on at the SRM prompt, followed by init before attempting to install OpenBSD. SRM console boot device restrictions: The SRM firmware on your system may or may not be able to boot from any disk controller you may install in your MACHINE. The built-in disk controllers on your MACHINE will always be supported, however on IDE-based machines, such as the EB164, 164SX and 164LX, as well as the low-end Personal Workstation (non-u models), you can plug in a SCSI controller, and boot from it if it is recognized. Recent SRM releases for these machines will be able to boot (or netboot) from the following controllers: QLogic PCI SCSI controllers Symbios Logic (NCR) 53C8xx (but not on PC164) Adaptec AHA-[23]9[34]x[U][W] cards Intel i8255x-based cards (EtherExpress PRO) The following controllers are known not to be supported as boot devices by the SRM: Adaptec AHA-[23]9[34]xU2 cards Depending on your specific model, your mileage may vary, though. OpenBSD/MACHINE console device restrictions: On systems with no framebuffer supported (currently all TURBOchannel-based machines), OpenBSD/MACHINE must be used with a serial console. Setting an Alpha system to use a serial console is system-specific. Although most models will default to serial console if no keyboard is connected on powerup, this behaviour can't be relied upon. The recommended procedure is: DEC 3000/[4-9]00 Flip the `S3' switch on the back of the machine (up for glass console, down for serial console). When configured to use a serial console, it is also necessary to set the ``server'' SRM environment variable to ``on'' for the system to autoboot on powerup despite the lack of a keyboard and mouse plugged in. DEC 3000/300 family machines These machines will automatically switch to serial console if the keyboard/mouse connector is left unplugged. All other machines From the SRM console, enter either set console serial or set console graphics at the SRM prompt, then enter init or cycle power.