dnl $OpenBSD: install,v 1.13 2013/12/04 23:20:19 jmc Exp $ OpenBSDInstallPrelude Booting the installation media: The easiest way to boot into the OpenBSD installer is to copy the miniroot image to a USB stick using dd(1) and boot bsd.rd from the PMON prompt: PMON> boot -k /dev/fs/ext2@usb0/bsd.rd on Lemote systems, and PMON> load /dev/fs/ext2@usb0/bsd.rd PMON> g on Gdium systems. Another way to boot into the OpenBSD installer is to copy the bsd.rd installation kernel to the main Linux partition, and boot from it. Assuming the installation kernel has been copied to /boot/bsd.rd on the Linux system, at the PMON prompt, enter PMON> boot -k /dev/fs/ext2@wd0/boot/bsd.rd on Lemote systems, and PMON> load /dev/fs/ext2@usbg0/boot/bsd.rd PMON> g on Gdium systems. dnl dnl Alternatively, if your particular PMON flavour supports `fat' filesystems, dnl you can boot the kernel from an usb key with: dnl dnl PMON> boot /dev/fs/fat@usb0:/bsd.rd Netbooting the installation kernel can be done as well: PMON> ifaddr rtl0 PMON> boot -k tftp:///bsd.rd OpenBSDInstallPart2 OpenBSDInstallPart3(,"sd0 for USB storage, or wd0 for internal storage (either a disk drive or an SSD)") OpenBSDInstallPart4 OpenBSDInstallMBRPart1 dnl OpenBSDInstallMBRPart2 The fdisk(8) utility will be invoked to let you edit your MBR partitioning. The current MBR partitions defined will be displayed and you will be allowed to modify them, and add new partitions. The setup will need one 'Linux files' partition and an 'OpenBSD' partition. If you use the whole disk option, the install script will create a small 'Linux files' partition and use the rest of the disk for the OpenBSD installation. After your OpenBSD MBR partition has been setup, the real partition setup can follow. OpenBSDInstallPart5({:- Linux partitions defined on the disk will usually show up as partition 'i', 'j' and so on.-:}) OpenBSDInstallPart6({:-CD-ROM, -:}) OpenBSDURLInstall OpenBSDCDROMInstall OpenBSDNFSInstall OpenBSDDISKInstall({:-"wdN" or -:},,{:-, Linux (ext2) or MS-DOS-:}) OpenBSDCommonInstall dnl usb tape drives anyone? dnl OpenBSDTAPEInstall dnl OpenBSDInstallWrapup Lemote systems final steps: Lemote systems ship with a boot menu. After an installation preserving the Linux partitions is complete, you can add an OpenBSD entry to the boot menu to be able to boot OpenBSD more easily. The boot menu contents are found in /boot/boot.cfg on the Linux partition. To add an OpenBSD entry, simply add a new entry in the file, such as: title OpenBSD kernel /dev/fs/ext2@wd0/boot/boot args "" In the example above, /dev/fs/ext2@wd0/boot/boot is the PMON path to the OpenBSD bootloader, which is copied to that location by the install script. You may make OpenBSD the default option by changing the ``default'' line near the top of the file. The value on this line is the index of the default entry, starting at zero. So if you added the OpenBSD entry as the fourth entry in the file, it would become the default choice with: default 3 The timeout until the default choice is selected, in seconds, can be modified on the ``timeout'' line. However, due to side effects of PMON operation, automatic loading of OpenBSD binaries (bootloader or kernel) causes a register dump to be silently displayed by PMON; while it won't be visible on screen, PMON will gladly wait for user input to continue if it believes it has written too much output. To overcome this annoyance, simply change the `moresz' environment variable to a large value (30 or larger will do): PMON> set moresz 30 The bootloader will attempt to load the kernel file set in the `bsd' environment variable. Should this fail, it will wait for user commands. The value of `bsd' should be a path within the OpenBSD root filesystem on the disk, such as: PMON> set bsd /bsd If you have removed the Linux installation or if you do not want to use the boot menu, you may simply disable it in the environment, and set the `al' variable to point to the bootloader path: PMON> set ShowBootMenu no PMON> set al /dev/fs/ext2@wd0/boot/boot Alternatively, you might want to create a /boot/boot.cfg file in the small Linux partition created by the installation. On the Fuloong 2F, getting PMON to use the serial console is tricky, due to PMON bugs and design decisions made by Lemote. PMON's default serial speed is 115200, and OpenBSD will also use that speed. By default, it is only possible to use serial input if no USB keyboard is attached. PMON will nevertheless display its output on the VGA display. To get full serial access, the first step is to boot into PMON> with both serial console and VGA display but no USB keyboard attached. You can type on the serial console, but output will be shown on the VGA display. Next enter the following commands: PMON> set novga 1 PMON> set nokbd 1 PMON> set al "" PMON> set ShowBootMenu no If you have a dual boot setup, mount the Linux boot partition and rename /boot/boot.cfg so that it does not get found by PMON. This will enable full serial access to PMON on the Fuloong 2F. Gdium systems final steps: Gdium systems do not have a boot menu, and directly boot the system (Linux, by default). Unfortunately, the OpenBSD bootloader operation is very limited on this machine, as it can not access USB devices (which means no keyboard input as well). To overcome this and be able to boot OpenBSD nevertheless, the bootloader relies upon PMON's ability to load a Linux so-called ``initrd'' image. By making PMON load the kernel as the ``initrd''i image, and then run the bootloader, the bootloader will be able to ``load'' the OpenBSD kernel correctly. The path to the file booted by default is set in the `al' environment variable, and the path to the initrd image is set in the `rd' environment variable. To boot the bsd kernel on the G-Key by default, assuming it has been copied to /boot/bsd on the first ext3 partition, and the bootloader has been copied to /boot/boot on the same filesystem, the settings are: PMON> set al /dev/fs/ext2@usbg0/boot/boot PMON> set rd /dev/fs/ext2@usbg0/boot/bsd Alternatively, you can disable autoboot by removing this variable: PMON> unset al OpenBSDCongratulations OpenBSDUnattendedInstallation