OpenBSD/MACHINE OSREV runs on ISA (AT-Bus), and PCI buses
with 603, 603e, 604, 604e processors.
Only systems with openfirmware are supported.
Has been tested on various Motorola (MCG) boards:
	VME16xx, Ultra, Pro2000,
	Pro3000, Series E and Series DT.
Also tested on a V-I Power-3 vme board.

MCG 603 machines will not work with later firmware. A firmware
incompatibility exists that has not yet been fixed. Some versions
of earlier openfirmware work fine with 603 family machines.

The minimal configuration is said to require 8M of RAM and 150M of
disk space, though we do not know of anyone running with a system
quite this minimal today.  To install the entire system requires much
more disk space,

Supported devices {:-include-:}:

	Floppy controllers. (only if running full ofw drivers)
	IDE hard disk controllers. (only if running full ofw drivers)
	SCSI host adapters: (if supported by ofw)
		[OPENFIRMWARE SUPPORT]
		Symbios Logic (NCR) 53C8xx-based PCI SCSI host adapters
		(ofw may support other scsi devices)
		[NATIVE SUPPORT]
		Symbios Logic (NCR) 53C8xx-based PCI SCSI host adapters

	VGA, SVGA Display Adapters. 
		[OPENFIRMWARE SUPPORT]
		X does not yet exist.  currently will only function as console
		[NATIVE SUPPORT]
		None

	Serial ports:
		[OPENFIRMWARE SUPPORT] (also MIX drivers)
		Only port 0 on the machine is supported and only as console.
		[NATIVE SUPPORT]
		VI kernels supports com0 and com1 serial ports.

	Ethernet adapters:
		[OPENFIRMWARE SUPPORT]
		Digital DC21x4x-based PCI Ethernet adapters, including:
		Znyx ZX34X
		(ofw may support other devices)
		[NATIVE SUPPORT]
		Digital DC21x4x-based PCI Ethernet adapters, including:
		Znyx ZX34X
		Znyx ZX314
		Onboard ethernet for Powerstack family machines.
	Tape drives:
		[OPENFIRMWARE SUPPORT]
		NONE
		[NATIVE SUPPORT]
		SCSI Tape drives
	CD-ROM drives:
		[OPENFIRMWARE SUPPORT]
		SCSI CD-ROM drives (act ask harddrives).
		[NATIVE SUPPORT]
		SCSI CD-ROM drives
	Mice:
		NONE
	Sound Cards:
		NONE
	Miscellaneous: