OpenBSD/sparc RELEASE runs on the following classes of machines: - sun4c (e.g. the SS1, SS1+, SS2, IPC, ELC, IPX, and SLC) - sun4 (e.g. the 4/100, 4/200, and 4/300. note that support for the 4/400 processor is incomplete) OpenBSD/sparc RELEASE does *not* run on these machines (yet): - sun-4/400 (lacking support for the I/O cache, and has ethernet problems) - sun4m (e.g. sparc classic, 4, 5, 10, and 20) - sun4d (e.g. sparc center 2000) Work on porting OpenBSD/sparc to the sun4m platform is currently in progress, but was not ready in time for the 1.1 release. The minimal configuration requires 4M of RAM and ~60M of disk space. To install the entire system requires much more disk space, and to run X or compile the system, more RAM is recommended. (OpenBSD with 4M of RAM feels like Solaris with 4M of RAM.) Note that until you have around 16M of RAM, getting more RAM is more important than getting a faster CPU.) Supported devices include: sun4c sbus video: cgsix, cgthree, and bwtwo frame buffers sun4 video (not thoroughly tested?): P4 on-board bwtwo, and VME cgtwo card serial ports: ttya and ttyb (can be used as console if needed) ethernet: on-board AMD Lance ethernet ("le0"), Sbus AMD Lance ethernet cards, on-board Intel 82586 ethernet (ie0 on 4/100's and 4/200's), VME Intel 82586 ethernet cards SCSI: on-board "esp" SCSI controller (sun4c's, and the 4/300), sbus "esp" SCSI controller, Sun "SUN-3"/"si" VME SCSI controller (polled mode only, slow), Sun "SCSI Weird"/"sw" on-board controller (4/110 only, polled) VME disks: Xylogics 7053 VME/SMD disk controller ("xd"), Xylogics 450/451 VME disk controller ("xy") [note: VME/IPI disks are not supported] sun floppy disk drive on sun4c's sun keyboard and mouse sun4c audio Hardware the we do NOT currently support, but get many questions about: sun4m, including multiprocessor machines interrupt driven SCSI driver for sun-4/100's and sun-4/200's The next release will hopefully run on many more machines. In particular, some Sun4m support will be there.