dnl	$OpenBSD: MAKEDEV.sub,v 1.6 2002/02/14 05:50:37 todd Exp $
dnl
dnl Copyright (c) 2001 Todd T. Fries <todd@OpenBSD.org>
dnl All rights reserved.
dnl
dnl Redistribution and use in source and binary forms, with or without
dnl modification, are permitted provided that the following conditions
dnl are met:
dnl 1. Redistributions of source code must retain the above copyright
dnl    notice, this list of conditions and the following disclaimer.
dnl 2. The name of the author may not be used to endorse or promote products
dnl    derived from this software without specific prior written permission.
dnl
dnl THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
dnl INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
dnl AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
dnl THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
dnl EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
dnl PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
dnl OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
dnl WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
dnl OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
dnl ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
dnl
dnl
dnl This file is an m4 file
dnl
dnl Conventions:
dnl
dnl o First, a change of quote to make shell statements like: `command`
dnl   possible
dnl
changequote(`{-', `-}')dnl
dnl
dnl o version info must be stripped of $ so we can say 'generated from' below
dnl
dnl  If we just use the version string how are we going to know what arch
dnl  'MAKEDEV.md,v' came from?
dnl
dnl  Thus, I have used the below to create a version string looking like
dnl  'OpenBSD: etc.sparc/MAKEDEV.inc,v...' which works, although requires
dnl  some attention if ported to another Id string setup.
dnl
dnl
dnl Initialize the stacks stored in _m4_*
dnl
undefine({-_m4_cvs_ver-})dnl
pushdef({-_m4_cvs_ver-}, {-done-})dnl
dnl
undefine({-_m4_devs-})dnl
pushdef({-_m4_devs-}, {-done-})dnl
dnl
undefine({-_m4_disks-})dnl
undefine({-_m4_disks2-})dnl
pushdef({-_m4_disks-}, {-done-})dnl
pushdef({-_m4_disks2-}, {-done-})dnl
dnl
dnl define stack 'add to' functions, only unique names queued
dnl
define({-ver_q-}, {-ifelse(index($1_ver, y), 0, ,
{-pushdef({-_m4_cvs_ver-}, {-$2-})define({-$1_ver-}, {-y-})-})-})dnl ver_q
dnl
define({-dev_q-}, {-ifelse(index(_q_$1_dev, :), 0,
{-errprint({-duplicated dev id: $1 at -}__file__{-:-}__line__ originally at _q_$1_dev)-},
{-pushdef({-_m4_devs-}, {-$1-})dnl
define({-_q_$1_dev-}, {-:-}__file__{-:-}__line__)-})-})dnl dev_q
dnl
define({-disk_q-}, {-ifelse(index(_q_$1_disk, :), 0,
{-errprint({-duplicated disk id: $1 at -}__file__{-:-}__line__ originally at _q_$1_disk)-}, {-pushdef({-_m4_disks-}, {-$1-})dnl
pushdef({-_m4_disks2-}, {-$1-})dnl
define({-_q_$1_disks-}, {-:-}__file__{-:-}__line__)-})-})dnl disk_q
dnl
dnl store a version string for 'this' file
dnl
dnl vers ( uniqueidstring, versionstring, subdir )
dnl
dnl example1: vers(__file__, {-$OpenBSD: MAKEDEV.sub,v 1.6 2002/02/14 05:50:37 todd Exp $-})
dnl example2: vers(__file__, {-$OpenBSD: MAKEDEV.sub,v 1.6 2002/02/14 05:50:37 todd Exp $-}, etc.MACHINE)
dnl
dnl if subdir is defined, prepend it to the filename in the version string
dnl
define({-vers-},
{-ifelse({-$3-}, {--},
{-ver_q(hstcl({-$1-}), {-translit({-{-$2-}-}, {-$-}, {--})-})-},
{-ver_q(hstcl({-$1-}), {-_addsubdir({-{-$2-}-}, $3)-})-})-})dnl
dnl
dnl Version info for this file:
dnl
vers(__file__, {-$OpenBSD: MAKEDEV.sub,v 1.6 2002/02/14 05:50:37 todd Exp $-})dnl
dnl
dnl
define({-_addsubdir-},
{-patsubst({-$1-}, {-\$(OpenBSD:) ([^\$]*)\$-}, {-\1 $2/\2-})-})dnl
dnl
dnl do the 'showing' of the version info
dnl
define({-do_vers-}, {-#	$1-})dnl
dnl
dnl show version function, to be called at the place when all versions are
dnl   queued, and it is time to show all of them
dnl
define({-show_vers-},
{-ifelse(_m4_cvs_ver, {-done-}, {--},
{-do_vers(_m4_cvs_ver)
popdef({-_m4_cvs_ver-})dnl
show_vers()dnl
-})-})dnl
dnl
dnl show the routines to generate devices
define({-show_devs-},
{-ifelse(_m4_devs, {-done-}, {--},
{-_MKDEV(_m4_devs){--}dnl
popdef({-_m4_devs-})dnl
show_devs()dnl
-})-})dnl
dnl
dnl routines to generate disks
define({-show_disks-},
{-ifelse(_m4_disks, {-done-}, {--},
{-ifcase(_m4_disks, _m4_disks{--}*)dnl
popdef({-_m4_disks-})dnl
show_disks()dnl
-})-})dnl
dnl
define({-show_disks2-},
{-ifelse(_m4_disks2, {-done-}, {--},
{-CasE(_m4_disks2)dnl
popdef({-_m4_disks2-})dnl
show_disks2()dnl
-})-})dnl
dnl
dnl
dnl Some m4 math functions:
dnl
dnl   Add(a, b)           - displays the result of a+b
dnl   Mult(a, b)          - displays the result of a*b
dnl   trunc a b          - displays the string a minus b removed from the RHS
dnl   hex a              - displays the hex equivalent of 0-15
dnl   unt a              - s/[a-z]*([0-9]*).*/\1/ aka sd0a -> 0
dnl
dnl Functions:
dnl
dnl --> Addition
dnl
define({-Add-}, {-$({-(-}$1+$2{-)-})-})dnl
dnl
dnl --> Multiplication
dnl
define({-Mult-}, {-$({-(-}$1*$2{-)-})-})dnl
dnl
dnl
dnl TRUNC
dnl
define({-expr_trunc-}, {-$1trunc()
$1{
$1	case {-$-}3 in
$1	l)   {-expr-} {-$-}1 : '\(.*\)'{-$-}2 ;;
$1	r|*) {-expr-} ${--}1 : ${--}2'\(.*\)' ;;
$1	esac
$1}-})dnl
dnl
dnl
define({-_SHELL-}, {-sh-})dnl
define({-_this-}, {-{-$-}T-})dnl
dnl define({-_recurse-}, {-_SHELL _this-})dnl
define({-_recurse-}, {-R-})dnl
dnl
dnl _devitem(pattern, description)
dnl
define({-_devitem-},
{-{-#-}	$1	{-$2-}-})dnl
dnl
dnl _devtitle(description)
dnl
define({-_devtitle-}, {-{-#-} $1:-})dnl
dnl
dnl _DEV(name, [character major], [block major])
dnl
define({-_DEV-}, {-$1_dev{--}dnl
dnl
dnl _DEV 'ifelse' .. $2 - major_$1_c
dnl
ifelse($2, , , {-define(major_$1_c, $2)-})dnl
dnl
dnl _DEV 'ifelse' .. $3 - major_$1_b
dnl
ifelse($3, , , {-define(major_$1_b, $3)-})dnl
dnl
dnl _DEV 'ifelse' .. $4 - step_$1
dnl
ifelse($4, , , {-define(step_$1, {-$4-})-})dnl
dnl
dnl Some magic here, defining a devitem also defines another
dnl string so that later we can check if a particular devitem was
dnl defined, and thus determine if the devices themselves are to
dnl be built
dnl
define({-$1__DEV-}, {-Y-})dnl
dnl
dnl More magic, put device string name into a queue of script segments to
dnl be shown later if it has been defined as a device in MAKEDEV.mi
dnl
ifdef({-$1_mkdev-}, {-__mkdev({-$1-})-})dnl
dnl
dnl
-})dnl _DEV
dnl
dnl
define({-ifdev-}, {-ifelse($1__DEV, Y, {-$2-})-})dnl
dnl
define({-_MKDEV-}, {-$1_mkdev-})dnl
define({-_TITLE-}, {-$1_title-})dnl
define({-__devitem-}, {-define($1_dev, {-_devitem($2, $3)-})$4-})dnl
define({-__devtitle-}, {-define($1_title, {-_devtitle($2)-})-})dnl
dnl
dnl Beginning and ending of case entries, just incase we change in the
dnl future, save chasing things down again
dnl
define({-_end-}, {-
	;;

-})dnl
define({-_beg-}, {-{-)-}
	-})dnl
dnl
dnl  create the script segment for making devices
dnl             $1     $2      $3
dnl _mkdev(shortname, devpatt, action)dnl
define({-_mkdev-}, {-define($1_mkdev, {-$2{--}_beg{--}$3{--}_end-})-})dnl
dnl
dnl  define a major character device
dnl             $1     $2      $3      $4
dnl _mcdev(shortname, devpatt, devbase, devmajor)dnl
dnl
define({-_mcdev-}, {-define($1_mkdev, {-{-$2-}_beg{--}M $3$U c $4 $U{--}dnl
ifelse($6, , ifelse($5, , , {- -}$5), {- -}ifelse($5, , 600, $5){- -}$6){--}_end-})-})dnl
dnl
dnl         $1        $2      $3        $4       $5      $6
dnl _cdev(shortname, devpatt, devmajor, devminor[, devmod, devgrp])dnl
define({-_cdev-},
{-dnl
define($1_mkdev, {-$2{--}_beg{--}M $2 c $3 $4 $5 $6{--}_end-}){--}-})dnl
dnl
dnl
define({-__mkdev-}, {-dev_q($1)-})dnl
dnl
dnl for showing disks
dnl
define({-CasE-},
{-ifdev({-$1-},
{-	$1*) dodisk $1 $U major_$1_b major_$1_c $U 0{--}ifstep($1);;
-})-})dnl
dnl
dnl
define({-ifcase-}, {-dnl
ifelse(C_ase, Y, ifdev({-$1-}, {-|$2-}),
{-ifdev({-$1-}, {-$2define({-C_ase-}, Y)-})-})-})dnl
dnl
dnl
dnl device list .. list devices 'iff' they are defined
dnl
dnl input:
dnl
dnl    _dl({-usb-}, {-usb0 usb1-}, {-urio-}, {-urio-}, ...)
dnl
dnl output:
dnl
dnl {-<tab>_recurse usb0 usb1 urio
dnl   <tab>_recurse uhid0 uhid2 uhid3-}
dnl
dnl  wrap if more than 60 chars wide
dnl
dnl .. wrap it all up in an 'ifelse({-$1-}, , {- ... -})' for neatness ??
dnl
define({-_dl-}, {-dnl
ifdef({-_dt-}, , {-define({-_dt-})-})dnl
ifdef({-_do-}, , {-_dt{--}_recurse{--}define({-_do-}, 0)dnl
define({-_dt-}, {-	-})-})dnl
ifdef({-$1__DEV-},
{-define({-_di-}, {-$2-})-},
{-define({-_di-})-})dnl
ifelse(eval(len(_di)+_do<60), 1,
{-ifelse(eval(len(_di)>0), 1,
{- _di{--}define({-_do-}, eval(1+_do+len(_di)))-})-},
{-
_dt{--}_recurse _di{--}dnl
define({-_do-}, len(_di))-})dnl
ifelse({-$3-}, {--},
{-undefine({-_dt-}, {-_do-})-}, dnl <--- The END
{-_dl(shift(shift($@)))-})-})dnl
dnl
dnl
define({-_show_target-}, {-dnl
ifdef({-$1__DEV-}, {-disp_dev({-$2-})-})dnl
ifelse({-$3-}, {--},
{-_disp_dev_end()-}, dnl <--- The END
{-_show_target(shift(shift($@)))-})-})dnl
dnl
define({-disp_dev-}, {-dnl
ifdef({-_disp_dev_tab-}, , {-define({-_disp_dev_tab-})-})dnl
ifdef({-_disp_dev_len-}, , {-dnl
define({-_disp_dev_len-}, 0)dnl
_disp_dev_tab{--}_recurse{--}dnl
define({-_disp_dev_tab-}, {-	-})-})dnl
ifelse(eval(len($1)+_disp_dev_len<60), 1,
{- $1{--}define({-_disp_dev_len-}, eval(1+_disp_dev_len+len($1)))-}, {-
_disp_dev_tab{--}_recurse $1{--}dnl
define({-_disp_dev_len-}, len($1))-})dnl
-})dnl
define({-_disp_dev_end-}, {-undefine({-_disp_dev_tab-}, {-_disp_dev_len-})-})dnl
dnl
dnl A word about the above:
dnl
dnl _dt -> 'tab' .. at first, defined to nothing, as the tab is already there
dnl        then define it to a tab every time through
dnl        undefine it at the end
dnl
dnl _do -> 'old' count .. stores the length of the old string already displayed
dnl        it is initialized to 0, added to the length plus 1 of '_di' each
dnl        iteration the line is less than 60 chars long
dnl	   undefined at the end
dnl _di -> 'iteration' string .. the string used in this iteration, is empty if
dnl        the device does not exist
dnl
dnl
dnl ifstep(devstr)
dnl   .. if stepping is defined for the particular device, emit ' step', else
dnl      nothing
define({-ifstep-}, {-ifdef({-step_$1-}, {- -}step_$1{--})-})dnl
dnl
dnl
define({-target-}, {-twrget({-$1-}, {-$2-}, {-$2-}, shift(shift($@)))-})dnl
dnl
dnl twrget(target, devname, prefix, str1, str2, str3)
dnl        $1     $2      $3     $4   $5   $6
dnl
define({-twrget-}, {-dnl
dnl
ifdef({-$1_target-}, , {-pushdef({-$1_target-}, {-done-})-})dnl
dnl
ifelse({-$4-}, , , {-dnl
ifelse({-$4-}, {-_done-}, , {-dnl
ifelse({-$5-}, , , {-dnl
dnl errprint({-recurse: $1, $2, $3, $4, $5, $6, ...-})dnl
twrget({-$1-}, {-$2-}, {-$3-}, shift(shift(shift(shift($@)))))dnl
-})-})-})dnl
dnl
ifelse({-$4-}, {-_done-}, , {-dnl
dnl errprint({-recurse: $1_$2_dev, $3$4, $3$4, _done-})dnl
twrget({-$1_$2_dev-}, {-$3$4-}, {-$3$4-}, {-_done-})dnl
-})dnl
dnl
ifdef({-$1$2target-}, , {-dnl
pushdef({-$1_target-}, {-$2-})define({-$1$2target-})dnl
-})dnl
dnl
-})dnl
dnl
dnl
define({-show_target-}, {-dnl
ifelse($1_target, {-done-}, {-_disp_dev_end()-},
{-dnl $1_target:
show_dev($1, -}$1_target{-)dnl
popdef({-$1_target-})dnl
show_target({-$1-})dnl
-})-})dnl
dnl
define({-show_dev-}, {-dnl
ifdef({-$2__DEV-}, {-dnl
ifelse($1_$2_dev_target, {-done-}, , {-dnl
disp_dev({-$1_$2_dev_target-})dnl
popdef({-$1_$2_dev_target-})dnl
show_dev({-$1-}, {-$2-})-})dnl
-})dnl
-})dnl
dnl