#!/bin/sh - # # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT. # generated from: # # OpenBSD: etc.hp300/MAKEDEV.md,v 1.3 2002/02/14 04:37:15 todd Exp # OpenBSD: MAKEDEV.mi,v 1.28 2002/02/14 04:41:32 todd Exp # OpenBSD: MAKEDEV.sub,v 1.5 2002/01/23 06:02:19 todd Exp # # $OpenBSD: MAKEDEV,v 1.40 2002/02/14 04:43:08 todd Exp $ # # Copyright (c) 2001 Todd T. Fries # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. The name of the author may not be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, # INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY # AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL # THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # Device "make" file. Valid arguments: # all makes all known devices, including local devices. # Tries to make the ``standard'' number of each type. # std standard devices # local configuration specific devices # Tapes: # ct* HP300 HP-IB cartridge tape # mt* (Magnetic) 9-track reel tape # st* Exabyte tape # Disks: # ccd* concatenated disk devices # hd* HP300 HP-IB disks # sd* SCSI disks # vnd* "file" pseudo-disks # rd* "ramdisk" pseudo-disks # Terminal multiplexers: # dca* HP200/300 single port serial interface # dcm* HP200/300 4 port serial mux interface # apci* HP400 4 port serial mux interface # Pseudo terminals: # tty* set of 16 slave psuedo terminals # pty* set of 16 master pseudo terminals # Printers: # ppi* HP-IB plotters # Call units: # Special purpose devices: # fd makes fd/* for the fdescfs # grf* raw interface to HP300 graphics devices # ite* terminal emulator interface to HP300 graphics devices # hil HP300 HIL input devices # bpf* Berkeley Packet Filter # tun* network tunnel driver # pf* Packet Filter # lkm loadable kernel modules interface # *random inkernel random data source # xfs* XFS filesystem devices # altq/ ALTQ control interface PATH=/sbin:/usr/sbin:/bin:/usr/bin T=$0 # set this to echo for Echo-Only debugging [ "$eo" ] || eo= hex() { case $1 in [0-9]) echo -n $1;; 10) echo -n a;; 11) echo -n b;; 12) echo -n c;; 13) echo -n d;; 14) echo -n e;; 15) echo -n f;; esac } trunc() { # XXX pdksh can't seem to deal with locally scoped variables # in ${foo#$bar} expansions arg1="$1" arg2="$2" case $3 in l) echo ${arg2#$arg1} ;; r|*) echo ${arg1#$arg2} ;; esac } unt() { # XXX pdksh can't seem to deal with locally scoped variables # in ${foo#$bar} expansions arg="$1" tmp="${arg#[a-zA-Z]*}" tmp="${tmp%*[a-zA-Z]}" while [ "$tmp" != "$arg" ] do arg=$tmp tmp="${arg#[a-zA-Z]*}" tmp="${tmp%*[a-zA-Z]}" done echo $arg } dodisk() { [ "$DEBUG" ] && set -x n=$(($((${5}*${7:-16}))+${6})) count=0 RMlist="$RMlist $1$2? r$1$2?" [ 0$7 -ne 8 ] && l="i j k l m n o p" for d in a b c d e f g h $l do M $1$2$d b $3 $(($n+$count)) 640 M r$1$2$d c $4 $(($n+$count)) 640 let count=count+1 done MKlist="$MKlist;chown root.operator $1$2? r$1$2?" } dodisk2() { n=$(($(($5*${7:-16}))+$6)) M $1$2a b $3 $n 640 operator M r$1$2a c $4 $n 640 operator n=$(($n+2)) M $1$2c b $3 $n 640 operator M r$1$2c c $4 $n 640 operator } # M name b/c major minor [mode] [group] RMlist="rm -f" MKlist=":" mkl() { [ "${mklist[$1]}" ] && { mklist[$1]="${mklist[$1]};mknod -m $1 $2 $3 $4 $5" } || { mklist[$1]="mknod -m $1 $2 $3 $4 $5" modes="$modes $1" } } M() { RMlist="$RMlist $1" mkl ${5-666} $1 $2 $3 $4 mklist="$mklist $1" G=${6:-wheel} [ "$7" ] && { MKlist="$MKlist;chown $7.$G $1" } || { case $G in wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;; esac [ "${grplist[$g]}" ] && { grplist[$g]="${grplist[$g]} $1" } || { groups="$groups $g" grplist[$g]="chgrp $G $1" } } return 0 } R() { [ "$DEBUG" ] && set -x for i in "$@" do U=`unt $i` [ "$U" ] || U=0 case $i in ramdisk) R std ct0 ct1 st0 st1 hd0 hd1 hd2 hd3 hd4 R sd0 sd1 sd2 sd3 sd4 rd0 pty0 R hil grf0 apci0 ite0 dca0 dcm0 dcm1 R bpf0 bpf1 tun0 tun1 lkm random ;; std) M console c 0 0 600 M tty c 1 0 M mem c 2 0 640 kmem M kmem c 2 1 640 kmem M null c 2 2 M zero c 2 12 M stdin c 21 0 M stdout c 21 1 M stderr c 21 2 M ksyms c 36 0 640 kmem M drum c 3 0 640 kmem M klog c 6 0 600 ;; dca*) case $U in 0|1|2|3) M tty$U c 12 $U 660 dialer uucp M cua$U c 12 $(($U+128)) 660 dialer uucp ;; *) echo bad unit for dca in: $i ;; esac ;; dcm*) case $U in 0|1|2|3) u="$(( $U * 4 ))" i=0 while [ $i -lt 4 ] do n="$(( $u + $i ))" ext=`hex $n` M tty0${ext} c 15 ${n} 660 dialer uucp M cua0${ext} c 15 "$(( $n + 128 ))" 660 dialer uucp i="$(( $i + 1 ))" done ;; *) echo bad unit for dcm in: $i ;; esac ;; apci*) # There exists only one Frodo ASIC per HP9000/400 SPU. case $U in 0) for i in 0 1 2 3; do M ttya${i} c 35 ${i} 660 dialer uucp M cuaa${i} c 35 $(($i+128)) 660 dialer uucp done ;; *) echo bad unit for apci in: $i ;; esac ;; ppi*) case $U in 0|1|2|3) M ppi$U c 11 $U 600 ;; *) echo bad unit for ppi in: $i ;; esac ;; ite*) case $U in 0|1|2|3) M ttye$U c 13 $U 600 ;; *) echo bad unit for ite in: $i ;; esac ;; grf*) case $U in 0|1|2|3) M grf$U c 10 $U # echo "grf$U: use MAKEDEV.hpux to make HP-UX names for device" ;; *) echo bad unit for grf in: $i ;; esac ;; hil*) for U in 0 1 2 3 4 5 6 7 do M hil$U c 14 $U if [ -f /usr/sbin/hilinfo ] then case `/usr/sbin/hilinfo -t hil$U` in mouse) if [ ! -f locator ] then MKlist="$MKlist;ln hil$U locator" RMlist="$RMlist locator" fi ;; keyboard) if [ ! -f keyboard ] then MKlist="$MKlist;ln hil$U keyboard" RMlist="$RMlist keyboard" fi ;; *) ;; esac fi done if [ ! -f /usr/sbin/hilinfo ] then MKlist="$MKlist;ln hil1 keyboard" MKlist="$MKlist;ln hil3 locator" RMlist="$RMlist keyboard locator" fi # echo "hil: use MAKEDEV.hpux to make HP-UX names for devices" ;; altq) RMlist="mkdir -p altq;$RMlist" for d in altq cbq wfq afm fifoq red rio localq hfsc cdnr blue priq; do M altq/$d c 52 $U 644 U=$(($U+1)) done ;; xfs*) M xfs$U c 51 $U 600 ;; *random) n=0 for pre in " " s u p a do M ${pre}random c 32 $n 644 n=$(($n+1)) done ;; lkm) M lkm c 24 0 640 kmem ;; pf*) M pf c 33 0 600 ;; tun*) M tun$U c 23 $U 600 ;; bpf*) M bpf$U c 22 $U 600 ;; fd) RMlist="mkdir -p fd;$RMlist" n=0 while [ $n -lt 64 ];do M fd/$n c 21 $n;n=$(($n+1));done MKlist="$MKlist;chmod 555 fd" ;; pty*) case $U in 0) off=0 name=p;; 1) off=16 name=q;; 2) off=32 name=r;; 3) off=48 name=s;; 4) off=64 name=t;; 5) off=80 name=u;; 6) off=96 name=v;; 7) off=112 name=w;; 8) off=128 name=x;; 9) off=144 name=y;; 10) off=160 name=z;; 11) off=176 name=P;; 12) off=192 name=Q;; 13) off=206 name=R;; 14) off=224 name=S;; 15) off=240 name=T;; *) echo bad unit for pty in: $i; continue;; esac n=0 while [ $n -lt 16 ] do nam=$name$(hex $n) M tty$nam c 4 $(($off+$n)) M pty$nam c 5 $(($off+$n)) n=$(($n+1)) done ;; rd*) dodisk2 rd $U 8 34 $U 0 ;; vnd*) dodisk vnd $U 6 19 $U 0 dodisk svnd $U 6 19 $U 128 ;; ct*|mt*|st*) case $i in ct*) name=ct blk=0 chr=7;; mt*) name=mt blk=1 chr=16;; st*) name=st blk=6 chr=20;; esac case $U in [0-7]) four=$(($U+4)) eight=$(($U+8)) twelve=$(($U+12)) twenty=$(($U+20)) M r$name$U c $chr $U 660 operator M r$name$four c $chr $four 660 operator M r$name$eight c $chr $eight 660 operator M r$name$twelve c $chr $twelve 660 operator MKlist="$MKlist;ln r$name$four nr$name$U";: sanity w/pdp11 v7 MKlist="$MKlist;ln r$name$twelve nr$name$eight";: ditto RMlist="$RMlist nr$name$U nr$name$eight" ;; *) echo bad unit for tape in: ;; esac ;; local) test -s $T.local && sh $T.local ;; all) R ite0 ct0 ct1 hd0 hd1 hd2 dcm0 dcm1 dcm2 dcm3 dca0 dca1 st0 R st1 hil grf0 local ppi0 apci0 xfs0 rndrandom lkm pf altq R tun0 tun1 tun2 tun3 bpf0 bpf1 bpf2 bpf3 bpf4 bpf5 bpf6 bpf7 R bpf8 bpf9 rd0 ccd0 ccd1 ccd2 ccd3 vnd0 vnd1 vnd2 vnd3 std R pty0 pty1 pty2 fd sd0 sd1 sd2 sd3 sd4 ;; sd*|hd*|ccd*) case $i in sd*) dodisk sd $U 4 8 $U 0;; hd*) dodisk hd $U 2 9 $U 0;; ccd*) dodisk ccd $U 5 17 $U 0;; esac ;; *) echo $i: unknown device ;; esac done } R "$@" if [ "$os" = "SunOS" ]; then eo=transform transform() { case $mode in 600) mask=077;; 640) mask=027;; 660) mask=007;; 644) mask=022;; 666) mask=0;; 440) mask=227;; esac echo `echo "$@"|sed \ 's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\ s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'` } fi list="$RMlist" for mode in $modes; do list="$list;${mklist[$mode]}" done for group in $groups; do list="$list;${grplist[$group]}" done list="$list;$MKlist" if [ "$eo" = "echo" -o "$eo" = "transform" ]; then $eo "$list" else echo "$list" | sh fi