#!/bin/sh - # # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT. # generated from: # # OpenBSD: etc.sparc/MAKEDEV.md,v 1.6 2002/01/23 07:53:01 todd Exp # OpenBSD: MAKEDEV.mi,v 1.22 2002/01/23 08:09:30 todd Exp # OpenBSD: MAKEDEV.sub,v 1.5 2002/01/23 06:02:19 todd Exp # # $OpenBSD: MAKEDEV,v 1.77 2002/01/23 08:23:19 todd Exp $ # # Copyright (c) 2001 Todd T. Fries # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. The name of the author may not be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, # INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY # AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL # THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # Device "make" file. Valid arguments: # all makes all known devices, including local devices. # Tries to make the ``standard'' number of each type. # std standard devices # local configuration specific devices # Tapes: # st* SCSI tapes # Disks: # sd* SCSI disks # cd* SCSI cdrom drives # ch* SCSI media changer # uk* SCSI Unknown device # ss* SCSI scanners # xy* Xylogic 450/451 disks # rd* "ramdisk" pseudo-disks # xd* Xylogic 753/7053 disks # fd* Floppy disk drives (3 1/2", 5 1/4") # vnd* "file" pseudo-disks # ccd* concatenated disk devices # Pseudo terminals: # tty* set of 16 slave psuedo terminals # pty* set of 16 master pseudo terminals # Printers: # Terminal ports: # tty[a-z]* Zilog 8530 Serial Port # cua[a-z]* Zilog 8530 Serial Port # Special purpose devices: # audio* audio device # openprom # bwtwo* # cgtwo* # cgthree* # cgfour* # cgsix* # cgeight* # cgfourteen* # tcx* # bpf* Berkeley Packet Filter # pf* Packet Filter # altq/ ALTQ control interface # lkm loadable kernel modules interface # tun* network tunnel driver # *random inkernel random data source # magma* magma card (makes 16 tty and 2 bpp) # bppmag[mno] magma parallel port device # spif* spif card (makes 8 tty and 1 bpp) # bpp[jkl] spif parallel port device # xfs* XFS filesystem devices # raid* RAIDframe disk devices # fd makes fd/* for the fdescfs # ses* SES/SAF-TE SCSI devices PATH=/sbin:/usr/sbin:/bin:/usr/bin T=$0 # set this to echo for Echo-Only debugging [ "$eo" ] || eo= hex() { case $1 in [0-9]) echo -n $1;; 10) echo -n a;; 11) echo -n b;; 12) echo -n c;; 13) echo -n d;; 14) echo -n e;; 15) echo -n f;; esac } trunc() { # XXX pdksh can't seem to deal with locally scoped variables # in ${foo#$bar} expansions arg1="$1" arg2="$2" case $3 in l) echo ${arg2#$arg1} ;; r|*) echo ${arg1#$arg2} ;; esac } unt() { # XXX pdksh can't seem to deal with locally scoped variables # in ${foo#$bar} expansions arg="$1" tmp="${arg#[a-zA-Z]*}" tmp="${tmp%*[a-zA-Z]}" while [ "$tmp" != "$arg" ] do arg=$tmp tmp="${arg#[a-zA-Z]*}" tmp="${tmp%*[a-zA-Z]}" done echo $arg } dodisk() { n=$(($((${5}*${7:-16}))+${6})) count=0 RMlist="$RMlist $1$2? r$1$2?" [ 0$7 -ne 8 ] && l="i j k l m n o p" for d in a b c d e f g h $l do M $1$2$d b $3 $(($n+$count)) 640 M r$1$2$d c $4 $(($n+$count)) 640 let count=count+1 done MKlist="$MKlist;chown root.operator $1$2? r$1$2?" } dodisk2() { n=$(($(($5*${7:-16}))+$6)) M $1$2a b $3 $n 640 operator M r$1$2a c $4 $n 640 operator n=$(($n+2)) M $1$2c b $3 $n 640 operator M r$1$2c c $4 $n 640 operator } # M name b/c major minor [mode] [group] RMlist="rm -f" MKlist=":" mkl() { [ "${mklist[$1]}" ] && { mklist[$1]="${mklist[$1]};mknod -m $1 $2 $3 $4 $5" } || { mklist[$1]="mknod -m $1 $2 $3 $4 $5" modes="$modes $1" } } M() { RMlist="$RMlist $1" mkl ${5-666} $1 $2 $3 $4 mklist="$mklist $1" G=${6:-wheel} [ "$7" ] && { MKlist="$MKlist;chown $7.$G $1" } || { case $G in wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;; esac [ "${grplist[$g]}" ] && { grplist[$g]="${grplist[$g]} $1" } || { groups="$groups $g" grplist[$g]="chgrp $G $1" } } return 0 } R() { for i in "$@" do U=`unt $i` [ "$U" ] || U=0 case $i in floppy) R std random R fd0 sd0 sd1 ;; std) M console c 0 0 600 M tty c 2 0 M mem c 3 0 640 kmem M kmem c 3 1 640 kmem M null c 3 2 M zero c 3 12 M stdin c 24 0 M stdout c 24 1 M stderr c 24 2 M ksyms c 122 0 640 kmem M drum c 7 0 640 kmem M klog c 16 0 600 M eeprom c 3 11 640 kmem M openprom c 70 0 644 M fb c 22 0 M mouse c 13 0 M kbd c 29 0 ;; ses*) M ses$U c 124 $U 640 operator ;; fd) RMlist="mkdir -p fd;$RMlist" n=0 while [ $n -lt 64 ];do M fd/$n c 24 $n;n=$(($n+1));done MKlist="$MKlist;chmod 555 fd" ;; xfs*) M xfs$U c 51 $U 600 ;; spif*) case $U in 0) offset=0 nam=j;; 1) offset=16 nam=k;; 2) offset=32 nam=l;; *) echo "bad unit for $i: $U"; exit 127;; esac offset=$(($U*64)) n=0 while [ $n -lt 8 ] do name=${nam}`hex $n` M tty$name c 102 $(($offset+$n)) 660 dialer uucp n=$(($n+1)) done M bpp${nam}0 c 103 $(($offset+0)) 600 ;; magma*) case $U in 0) offset=0 nam=m;; 1) offset=16 nam=n;; 2) offset=32 nam=o;; *) echo "bad unit for $i: $U"; exit 127;; esac offset=$(($U*64)) n=0 while [ $n -lt 16 ] do name=${nam}`hex $n` M tty$name c 100 $(($offset+$n)) 660 dialer uucp n=$(($n+1)) done M bpp${nam}0 c 101 $(($offset+0)) 600 M bpp${nam}1 c 101 $(($offset+1)) 600 ;; *random) n=0 for pre in " " s u p a do M ${pre}random c 119 $n 644 n=$(($n+1)) done ;; tun*) M tun$U c 111 $U 600 ;; lkm) M lkm c 112 0 640 kmem ;; altq) RMlist="mkdir -p altq;$RMlist" for d in altq cbq wfq afm fifoq red rio localq hfsc cdnr blue priq; do M altq/$d c 125 $U 644 U=$(($U+1)) done ;; pf*) M pf c 59 0 600 ;; bpf*) M bpf$U c 105 $U 600 ;; tcx*) M tcx$U c 109 $U ;; cgfourteen*) M cgfourteen$U c 99 $U ;; cgeight*) M cgeight$U c 64 $U 666 ;; cgsix*) M cgsix$U c 67 $U 666 ;; cgfour*) M cgfour$U c 39 $U 666 ;; cgthree*) M cgthree$U c 55 $U 666 ;; cgtwo*) M cgtwo$U c 31 $U 666 ;; bwtwo*) M bwtwo$U c 27 $U 666 ;; openprom) M openprom c 70 0 ;; audio*) M sound$U c 69 $U M mixer$U c 69 $(($U+16)) M audio$U c 69 $(($U+128)) M audioctl$U c 69 $(($U+192)) MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio" MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer" MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound" MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl" ;; cua[a-z]) u=${i#cua*} case $u in a) n=0 ;; b) n=1 ;; c) n=4 ;; d) n=5 ;; *) echo unknown cua device $i ;; esac M cua$u c 12 $(($n+128)) 660 dialer uucp ;; tty[a-z]) u=${i#tty*} case $u in a) n=0 ;; b) n=1 ;; c) n=4 ;; d) n=5 ;; *) echo unknown tty device $i ;; esac M tty$u c 12 $n 660 dialer uucp ;; pty*) case $U in 0) off=0 name=p;; 1) off=16 name=q;; 2) off=32 name=r;; 3) off=48 name=s;; # Note that telnetd, rlogind, and xterm (at least) only look at p-s. 4) off=64 name=t;; 5) off=80 name=u;; 6) off=96 name=v;; 7) off=112 name=w;; 8) off=128 name=x;; 9) off=144 name=y;; 10) off=160 name=z;; 11) off=176 name=P;; 12) off=192 name=Q;; 13) off=206 name=R;; 14) off=224 name=S;; 15) off=240 name=T;; *) echo bad unit for pty in: $i; continue;; esac n=0 while [ $n -lt 16 ] do nam=$name$(hex $n) M tty$nam c 20 $(($off+$n)) M pty$nam c 21 $(($off+$n)) n=$(($n+1)) done ;; vnd*) dodisk vnd $U 8 110 $U 0 dodisk svnd $U 8 110 $U 128 ;; fd*) typnam=$U${i#fd[01]*} case $typnam in 0|1) typnum=0;; # no type specified, assume A *A) typnam=0; typnum=0;; *B) typnum=1;; *C) typnum=2;; *D) typnum=3;; *E) typnum=4;; *F) typnum=5;; *G) typnum=6;; *H) typnum=7;; *) echo bad type $typnam for $i; exit 1;; esac case $U in 0|1) blk=16; chr=54;; *) echo bad unit $U for $i; exit 1;; esac nam=fd${typnam} n=$(($(($U*128))+$(($typnum*16)))) M ${nam}a b $blk $n 640 operator M ${nam}b b $blk $(($n+1)) 640 operator M ${nam}c b $blk $(($n+2)) 640 operator M r${nam}a c $chr $n 640 operator M r${nam}b c $chr $(($n+1)) 640 operator M r${nam}c c $chr $(($n+2)) 640 operator ;; rd*) dodisk2 rd $U 17 106 $U 0 ;; ss*) M ss$U c 121 $U 440 operator RMlist="$RMlist scan$U" MKlist="$MKlist;umask 77;ln -s ss$U scan$U" ;; uk*) M uk$U c 120 $U 640 operator ;; ch*) M ch$U c 19 $U 660 operator ;; cd*) dodisk2 cd $U 18 58 $U 0 ;; st*) n=$(($U*16)) for pre in " " n e en do M ${pre}st$U b 11 $n 660 operator M ${pre}rst$U c 18 $n 660 operator n=$(($n+1)) done ;; local) test -s $T.local && sh $T.local ;; all) R tcx0 cgfourteen0 cgeight0 cgsix0 cgfour0 cgthree0 cgtwo0 R bwtwo0 audio0 xfs0 ss0 ss1 uk0 ses0 rndrandom lkm cuaa cuab R cuac cuad ttya ttyb ttyc ttyd pf altq tun0 tun1 tun2 tun3 R bpf0 bpf1 bpf2 bpf3 bpf4 bpf5 bpf6 bpf7 bpf8 bpf9 fd1 fd1B R fd1C fd1D fd1E fd1F fd1G fd1H fd0 fd0B fd0C fd0D fd0E fd0F R fd0G fd0H rd0 xd0 xd1 xd2 xd3 xy0 xy1 xy2 xy3 raid0 raid1 R raid2 raid3 ccd0 ccd1 ccd2 ccd3 vnd0 vnd1 vnd2 vnd3 std cd0 R cd1 ch0 st0 st1 pty0 pty1 fd sd0 sd1 sd2 sd3 sd4 ;; xd*|xy*|sd*|raid*|ccd*) case $i in xd*) dodisk xd $U 10 42 $U 0;; xy*) dodisk xy $U 3 9 $U 0;; sd*) dodisk sd $U 7 17 $U 0;; raid*) dodisk raid $U 25 123 $U 0;; ccd*) dodisk ccd $U 9 23 $U 0;; esac ;; *) echo $i: unknown device ;; esac done } R "$@" if [ "$os" = "SunOS" ]; then eo=transform transform() { case $mode in 600) mask=077;; 640) mask=027;; 660) mask=007;; 644) mask=022;; 666) mask=0;; 440) mask=227;; esac echo `echo "$@"|sed \ 's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\ s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'` } fi list="$RMlist" for mode in $modes; do list="$list;${mklist[$mode]}" done for group in $groups; do list="$list;${grplist[$group]}" done list="$list;$MKlist" if [ "$eo" = "echo" -o "$eo" = "transform" ]; then $eo "$list" else echo "$list" | sh fi