Interesting configure options

The latest version of this document is always available at http://gcc.gnu.org/onlinedocs/libstdc++/configopts.html.

To the libstdc++-v3 homepage.

Here are some of the non-obvious options to libstdc++'s configure. Keep in mind that they all have opposite forms as well (enable/disable and with/without). The defaults are for current development sources, which may be different than those for released versions.

The canonical way to find out the configure options that are available for a given set of libstdc++ sources is to go to the source directory and then type: ./configure --help

--enable-multilib [default]

This is part of the generic multilib support for building cross compilers. As such, targets like "powerpc-elf" will have libstdc++ built many different ways: "-msoft-float" and not, etc. A different libstdc++ will be built for each of the different multilib versions. This option is on by default.

--enable-sjlj-exceptions

Forces old, set-jump/long-jump exception handling model. If at all possible, the new, frame unwinding exception handling routines should be used instead, as they significantly reduce both runtime memory usage and executable size. This option can change the library ABI.

--enable-version-specific-runtime-libs

Specify that run-time libraries should be installed in the compiler-specific subdirectory (i.e., ${libdir}/gcc-lib/${target_alias}/${gcc_version}) instead of ${libdir}. This option is useful if you intend to use several versions of gcc in parallel. In addition, libstdc++'s include files will be installed in ${libdir}/gcc-lib/${target_alias}/${gcc_version}/include/g++, unless you also specify --with-gxx-include-dir=dirname during configuration.

--with-gxx-include-dir=<include-files dir>

Adds support for named libstdc++ include directory. For instance, the following puts all the libstdc++ headers into a directory called "2.97-20001008" instead of the usual "c++/(version)".

   --with-gxx-include-dir=/foo/H-x86-gcc-3-c-gxx-inc/include/2.97-20001008

--enable-cstdio

This is an abbreviated form of '--enable-cstdio=stdio' (described next). This option can change the library ABI.

--enable-cstdio=OPTION

Select a target-specific I/O package. At the moment, the only choice is to use 'stdio', a generic "C" abstraction. The default is 'stdio'. A longer explanation is here.

--enable-clocale

This is an abbreviated form of '--enable-clocale=generic' (described next). This option can change the library ABI.

--enable-clocale=OPTION

Select a target-specific underlying locale package. The choices are 'ieee_1003.1-2001' to specify an X/Open, Standard Unix (IEEE Std. 1003.1-2001) model based on langinfo/iconv/catgets, 'gnu' to specify a model based on functionality from the GNU C library (langinfo/iconv/gettext) (from glibc, the GNU C library), or 'generic' to use a generic "C" abstraction which consists of "C" locale info.

As part of the configuration process, the "C" library is probed both for sufficient vintage, and installed locale data. If either of these elements are not present, the C++ locale model default to 'generic.' On glibc-based systems of version 2.2.5 and above with installed locale files, 'gnu' is automatically selected.

--enable-libstdcxx-allocator

This is an abbreviated form of '--enable-libstdcxx-allocator=auto' (described next). This option can change the library ABI.

--enable-libstdcxx-allocator=OPTION

Select a target-specific underlying std::allocator. The choices are 'new' to specify a wrapper for new, 'malloc' to specify a wrapper for malloc, 'mt' for a fixed power of two allocator (documented under extensions), 'pool' for the SGI pooled allocator or 'bitmap' for a bitmap allocator. This option can change the library ABI.

--enable-cheaders=OPTION

This allows the user to define what kind of C headers are used. Options are c and c_std. These correspond to the source directory's include/c and include/c_std. The default is c_std.

--enable-threads

This is an abbreviated form of '--enable-threads=yes' (described next). This option can change the library ABI.

--enable-threads=OPTION

Select a threading library. A full description is given in the general compiler configuration instructions.

--enable-libstdcxx-debug

Build separate debug libraries in addition to what is normally built. By default, the debug libraries are compiled with CXXFLAGS='-g3 -O0' , are installed in ${libdir}/debug, and have the same names and versioning information as the non-debug libraries. This option is off by default.

Note this make command, executed in the build directory, will do much the same thing, without the configuration difference and without building everything twice: make CXXFLAGS='-g3 -O0' all

--enable-libstdcxx-debug-flags=FLAGS

This option is only valid when --enable-debug is also specified, and applies to the debug builds only. With this option, you can pass a specific string of flags to the compiler to use when building the debug versions of libstdc++. FLAGS is a quoted string of options, like

  --enable-libstdcxx-debug-flags='-g3 -O1 -gdwarf-2'

--enable-cxx-flags=FLAGS

With this option, you can pass a string of -f (functionality) flags to the compiler to use when building libstdc++. This option can change the library ABI. FLAGS is a quoted string of options, like

  --enable-cxx-flags='-fvtable-gc -fomit-frame-pointer -ansi'

Note that the flags don't necessarily have to all be -f flags, as shown, but usually those are the ones that will make sense for experimentation and configure-time overriding.

The advantage of --enable-cxx-flags over setting CXXFLAGS in the 'make' environment is that, if files are automatically rebuilt, the same flags will be used when compiling those files as well, so that everything matches.

Fun flags to try might include combinations of

  -fstrict-aliasing
  -fno-exceptions
  -ffunction-sections
  -fvtable-gc

and opposite forms (-fno-) of the same. Tell us (the libstdc++ mailing list) if you discover more!

--enable-c99

The "long long" type was introduced in C99, along with many other functions for wide characters, and math classification macros, etc. If enabled, all C99 functions not specified by the C++ standard will be put into namespace __gnu_cxx, and then all these names will be injected into namespace std, so that C99 functions can be used "as if" they were in the C++ standard (as they will eventually be in some future revision of the standard, without a doubt). By default, C99 support is on, assuming the configure probes find all the necessary functions and bits necessary. This option can change the library ABI.

--enable-wchar_t [default]

Template specializations for the "wchar_t" type are required for wide character conversion support. Disabling wide character specializations may be expedient for initial porting efforts, but builds only a subset of what is required by ISO, and is not recommended. By default, this option is on. This option can change the library ABI.

--enable-long-long

The "long long" type was introduced in C99. It is provided as a GNU extension to C++98 in g++. This flag builds support for "long long" into the library (specialized templates and the like for iostreams). This option is on by default: if enabled, users will have to either use the new-style "C" headers by default (i.e., <cmath> not <math.h>) or add appropriate compile-time flags to all compile lines to allow "C" visibility of this feature (on GNU/Linux, the flag is -D_ISOC99_SOURCE, which is added automatically via CPLUSPLUS_CPP_SPEC's addition of _GNU_SOURCE). This option can change the library ABI.

--enable-fully-dynamic-string

This option enables a special version of basic_string avoiding the optimization that allocates empty objects in static memory. Mostly useful together with shared memory allocators, see PR libstdc++/16612 for details.

--enable-concept-checks

This turns on additional compile-time checks for instantiated library templates, in the form of specialized templates, described here. They can help users discover when they break the rules of the STL, before their programs run.

--enable-symvers[=style]

In 3.1 and later, tries to turn on symbol versioning in the shared library (if a shared library has been requested). Values for 'style' that are currently supported are 'gnu', 'gnu-versioned-namespace', 'darwin', and 'darwin-export'. Both gnu- options require that a recent version of the GNU linker be in use. Both darwin options are equivalent. With no style given, the configure script will try to guess correct defaults for the host system, probe to see if additional requirements are necessary and present for activation, and if so, will turn symbol versioning on. This option can change the library ABI.

--enable-visibility

In 4.2 and later, enables or disables visibility attributes. If enabled (as by default), and the compiler seems capable of passing the simple sanity checks thrown at it, adjusts items in namespace std, namespace std::tr1, and namespace __gnu_cxx so that -fvisibility options work.

--enable-libstdcxx-pch

In 3.4 and later, tries to turn on the generation of stdc++.h.gch, a pre-compiled file including all the standard C++ includes. If enabled (as by default), and the compiler seems capable of passing the simple sanity checks thrown at it, try to build stdc++.h.gch as part of the make process. In addition, this generated file is used later on (by appending --include bits/stdc++.h to CXXFLAGS) when running the testsuite.

--disable-hosted-libstdcxx

By default, a complete hosted C++ library is built. The C++ Standard also describes a freestanding environment, in which only a minimal set of headers are provided. This option builds such an environment.

Return to the top of the page or to the libstdc++ homepage.

See license.html for copying conditions. Comments and suggestions are welcome, and may be sent to the libstdc++ mailing list.