Fri Dec 30 17:58:55 1994 Steve Chamberlain (sac@jonny.cygnus.com) * config/m68k/tm-est.h: Remove cruft. Fri Dec 30 15:49:00 1994 Stan Shebs * gdbtk.tcl (FSBox): New proc, File Selection Box code from exmh. (not_implemented_yet): New proc. (build_framework): Add various file commands to file menu. Thu Dec 29 22:40:00 1994 Jeff Law (law@snake.cs.utah.edu) * Allow up to 10 whitespace separated arguments to user defined commands. * top.c (struct user_args): Structure for holding arguments to user defined commands. (print_command_line): Delete unused "tmp_chain" variable. Clean up flow control by having cases exit in the same manner. Before executing a command or evaluating an expression, substitute the current $arg0..$arg9 values if the command/expression uses them. (arg_cleanup): New function. (setup_user_args, locate_arg, insert_args): Likewise. (execute_user_command): Allow arguments to user defined commands. * Allow if/while commands to be used within a breakpoint command list. * breakpoint.c (bpstat_do_actions): Call execute_control_command rather than execute_command (passes entire command structure rather than just the command line text). (breakpoint_1): Use "print_command_line" to print a breakpoint command line (including control structures). * gdbcmd.h (execute_control_command): Provide extern decl. (print_command_line): Likewise. * top.c (execute_control_command): No longer static. (print_command_line): New function to recursively print a command line, including control structures. Thu Dec 29 18:18:31 1994 Rob Savoye * hppa-tdep.c (pa_print_registers): Extract register values stored in big endian format on big and little endian hosts. * array-rom.c: Support for Array Tech LSI33k based RAID disk controller board. * configure.in: Recognize "mips*-*-ecoff*" rather than "mips*-idt-ecoff*" so it'll work for the LSI33k. * monitor.[ch], op50-rom.c, rom68k-rom.c, w89k-rom.c: Add support to monitor config structure for supported baud rates for a target and variable stop bits. * monitor.c (monitor_fetch_register): Store register values in big endian format on any host. Wed Dec 28 19:27:22 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (hppa_fix_call_dummy): Prefer import stubs over export stubs and actual shared library functions so that lazy binding works correctly. Try both __d_plt_call and __gcc_plt_call trampolines for calling import stubs. Wed Dec 28 15:29:02 1994 Stan Shebs * a29k-tdep.c (pop_frame): Fix a variable name. Wed Dec 28 12:21:39 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (push_dummy_frame): Refine code to determine what space ID to place in the stack & inf_status structure. (hppa_pop_frame): Don't walk through trampoline code if popping a call dummy frame. (hppa_fix_call_dummy): Call the stack dummy directly if the current PC is in a shared library. * hppa-tdep.c (push_dummy_frame): Return type is void. Clear in_syscall bit in flags. Don't depend on the PC queue registers when in_syscall is set, they're not valid. * config/pa/tm-hppa.h (PUSH_DUMMY_FRAME): Pass inf_status down to push_dummy_frame. (SR4_REGNUM): Define. * hppa-tdep.c: Misc. lint changes. Tue Dec 27 12:32:43 1994 Jeff Law (law@snake.cs.utah.edu) * breakpoint.c (watchpoint_check): Don't bother restoring the "selected" frame anymore, it's not necessary. Initialize the frame cache before trying to find the current frame in the frame chain. * somsolib.c (som_solib_add): Return without loading any shared libraries if symfile_objfile is NULL. (som_solib_create_inferior_hook): Likewise. Fri Dec 23 17:03:13 1994 Steve Chamberlain (sac@jonny.cygnus.com) * remote-est.c: New file supports EST-300 CPU32 background mode ICE. * remote-utils.c (sr_com): Call registers_changed. * configure.in (m68*-*-est*): New configuration. * config/m68k/tm-est.h: New file. Fri Dec 23 16:18:50 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in (CLIBS): Put LIBIBERTY last. * gdbtk.c (gdbtk_wait gdbtk_init): Portability improvements for SIGIO handling. Thu Dec 22 09:27:16 1994 Jim Kingdon * ser-tcp.c (tcp_open): Cast to struct sockaddr when passing to function which expects that. Thu Dec 22 13:25:33 1994 J.T. Conklin (jtc@rtl.cygnus.com) * nlm/gdbserve.c, nlm/ppc.c, nlm/ppc.h: Don't try to use ALTERNATE_MEM_FUNCS. Wed Dec 21 14:00:26 1994 Rob Savoye * monitor.c: Now supports xmodem as a remoteloadprotocol. Tue Dec 20 23:01:17 1994 Stu Grossman (grossman@cygnus.com) * config/mips/xm-irix4.h, config/mips/xm-irix5.h: #define _BSD_COMPAT to get reliable signal handling. Tue Dec 20 11:44:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * sparc-tdep.c, a29k-tdep.c, findvar.c (get_saved_register): if !target_has_registers, call error(). * value.h: Remove obsolete comments about FRAME vs struct frame_info *. Mon Dec 19 09:55:47 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl (update_assembly): Force update to make sure that pc is visible when creating new assembly windows. Sun Dec 18 23:31:20 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.c (gdbtk_wait gdbtk_init): Use different method of enabling I/O interrupts for SVR4 (streams). * (start_saving_output save_output get_saved_output finish_saving_output flush_holdbuf gdbtk_flush gdbtk_fputs gdbtk_init): Totally revamp to use TCLs dynamic string functions. Also, quote all data passed back to TCL to prevent errors with unmatched braces, odd characters, etc... This fixes several wierd problems with outputting strings containing unmatched braces. * (breakpoint_notify gdb_loc): Use long hex format to output addresses of breakpoints and PCs. This fixes some Alpha problems. * (breakpoint_notify): Add stream arg to call to gdbtk_fputs. * (gdb_listfiles): Also, go through the symtabs when looking for files. This makes xcoff work (sort of), but probably breaks something else. * (gdb_stop): Return TCL_OK instead of nothing. This fixes odd TCL errors when hitting stop button. * (tk_command): Don't pass interp->result on to Tcl_{Var}Eval, as that will trash the result. strdup the result instead and pass that on. Improve error handling as well. * gdbtk.tcl (gdbtk_tcl_flush): Use global def of current_output_win. Makes flushing actually work! * (asm_win_name create_asm_win update_assembly): Bunch of fixes to make assembly windows stop flashing when loading a new file. * (gdbtk_tcl_busy gdbtk_tcl_idle): Use catch to prevent gdb_cmd errors from losing control. * (create_source_window): Add source file selection to View menu. * (create_command_window ( binding): Quote text fed into gdb_cmd to prevent eval errors. Sun Dec 18 11:52:58 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * sparc-tdep.c (sparc_pop_frame): Remove erroneous extra argument to write_register. Sat Dec 17 13:23:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * tm-sparc.c (EXTRA_FRAME_INFO): New field sp_offset. * sparc-tdep.c (sparc_init_extra_frame_info): Set it. (examine_prologue, sparc_init_extra_frame_info): Use ->frame plus ->sp_offset to compute the address something is saved at, not ->bottom. * sparc-tdep.c (get_saved_register): New function. * tm-sparc.h: Define GET_SAVED_REGISTER; don't define FRAME_FIND_SAVED_REGS, HAVE_REGISTER_WINDOWS or REGISTER_IN_WINDOW_P. * stack.c (frame_info): Add comment about what to do if FRAME_FIND_SAVED_REGS is not defined. * sparc-tdep.c (sparc_init_extra_frame_info): Set ->frame field here. Get it right for flat frames. * sparc-tdep.c (sparc_frame_chain): Instead of returning meaningful value for ->frame field, just return dummy value. This change is needed because the old code didn't deal with mixed flat and non-flat frames. * sparc-tdep.c (sparc_pop_frame): Write SP_REGNUM from frame->frame, don't go through saved regs for this. * sparc-tdep.c: Move guts of skip_prologue to new function examine_prologue. Check for flat prologue and set is_flat. Provide the caller with the information about what is saved where if desired. (skip_prologue, sparc_frame_find_saved_regs): Call examine_prologue. * sparc-tdep.c: Replace union sparc_insn_layout and anonymous union in isannulled, which won't work on a little-endian host, with X_* macros. * sparc-tdep.c (sparc_frame_saved_pc): If addr == 0, the saved PC is still in %o7. * config/sparc/tm-sparc.h: Define INIT_FRAME_PC and INIT_FRAME_PC_FIRST. * blockframe.c (get_prev_frame_info): Modify comments regarding INIT_FRAME_PC_FIRST and the sparc. * sparc-tdep.c (single_step): Use 4 not sizeof (long) for size of instruction. Sat Dec 17 02:33:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * c-typeprint.c (c_type_print_base): Use `show' of -1 to print the return type of methods to avoid infinite loops with anonymous types. * valops.c (search_struct_field): Handle anonymous unions. * sparc-tdep.c (sunos4_skip_trampoline_code): New function to correctly handle steps into -g compiled PIC objects in the main executable. * config/sparc/tm-sun4os4.h (SKIP_TRAMPOLINE_CODE): Redefine to use sunos4_skip_trampoline_code. * dwarfread.c (DWARF_REG_TO_REGNUM): Provide a default mapping from DWARF to GDB register numbering. * dwarfread.c (locval): Use DWARF_REG_TO_REGNUM to map the register value. * config/mips/tm-mipsv4.h (DWARF_REG_TO_REGNUM): Define. Fri Dec 16 10:56:29 1994 J.T. Conklin * Makefile.in (uninstall): transform file names. Thu Dec 15 16:55:35 1994 Stan Shebs * defs.h: Include progress.h. (QUIT): Call PROGRESS. * main.c (main): Call START_PROGRESS and END_PROGRESS, break usage message into shorter strings. * source.c: Change long command help strings into concats of shorter ones, for picky ANSI compilers. * top.c (command_loop): For space usage display, show both absolute size and the change from before command execution. Thu Dec 15 16:40:10 1994 Stu Grossman (grossman@cygnus.com) * defs.h, main.c (gdb_fputs), top.c: Add stream arg to fputs_unfiltered_hook. * defs.h, top.c, utils.c (error): Add error_hook. * gdbtk.c: Improve mechanism for capturing output values. (full_filename): Remove. (gdb_cmd call_wrapper gdbtk_init): Protect all calls from tcl land with call_wrapper. This prevents longjmps (usually via error()) from jumping out of tcl/tk and leaving things in an indeterminate state. (gdbtk_fputs): Differentiate stdout from stderr when passing text into tcl land. * gdbtk.tcl: New view option to disable line numbers. Put catch around most uses of gdb_cmd. Add update button to reg config window. Stop doing immediate updates when selecting registers. Change register view values into checkbuttons. Tue Dec 13 15:15:33 1994 Stan Shebs * breakpoint.c, infrun.c, printcmd.c: Change long command help strings into concats of shorter ones, for picky ANSI compilers. Mon Dec 12 17:08:02 1994 Stan Shebs Sparc flat register window support. * sparc-tdep.c (sparc_insn_layout): New union, defines layout of instructions symbolically (used to be local to skip_prologue). (sparc_init_extra_frame_info): New function. (sparc_frame_chain): Add flat cases throughout. (skip_prologue): Add recognition of flat prologues. (sparc_frame_find_saved_regs): Add flat cases. (sparc_pop_frame): Ditto. * config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): New slots. (INIT_EXTRA_FRAME_INFO): Call sparc_init_extra_frame_info. (PRINT_EXTRA_FRAME_INFO): Define. Mon Dec 12 16:59:29 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl (reg_config_menu create_registers_window recompute_reg_display_list): Use array instead of individual vars for register display list. * (recompute_reg_display_list update_registers): Fix bug with not displaying all registers. Mon Dec 12 13:06:59 1994 Jim Kingdon * f-lang.c: Remove duplicate declaration of builtin_type_f_integer, and only include it in the f_builtin_types once. * somread.c (som_symfile_read): Just assign to objfile->obj_private, not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which the HP compiler doesn't like. Mon Dec 12 12:22:21 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.c: New tcl commands: gdb_fetch_registers, gdb_changed_register_list, and gdb_regnames. * gdbtk.tcl: Use monochrome color model for now. * (delete_breakpoint_tag create_file_win): Add breakdot support. * (create_file_win create_asm_win update_listing build_framework create_source_window create_command_window): Re-org window creation to give all windows consistent look and feel. * (update_listing update_asm): Change pc pointer to '->'. * (registers_command reg_config_menu create_registers_window populate_reg_window update_registers): Revamp register window. Allow selection of registers to be displayed. Highlight changed registers. Fri Dec 9 15:50:05 1994 Stan Shebs * remote.c (remote_wait): Pass string instead of char to strcpy. Fri Dec 9 04:43:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdbserver/low-lynx.c (mywait): Remove debugging printf. Thu Dec 8 15:07:29 1994 Jim Kingdon * frame.h: Restore pre-Nov 3 comments about FRAME_FP with minor changes. They are correct, unlike the post-Nov 3 comment (FRAME_FP doesn't have any machine-independent relationship with FP_REGNUM or any other such notion of a "frame pointer"). Wed Dec 7 14:50:54 1994 Jim Kingdon * gdbserver/remote-utils.c (write_ok): Write "OK", not "Ok", to match stubs and protocol spec. * gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr when passing to function which expects that. The following changes aren't quite enough to make things work with LynxOS (apprently kernel problems). * infrun.c (wait_for_inferior): When resuming new thread, pass pid not -1 for remote case. * thread.c (info_threads_command): Give error if !target_has_stack. * infrun.c (start_remote): Call init_thread_list. * thread.c (info_threads_command): Don't call kill for remote debugging target. * target.c (normal_pid_to_str): Print "thread" not "process" for remote. * remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X' response, and `thread' part of 'T' response. * gdbserver/*: If program exits, send packet to GDB before exiting. Handle termination with a signal the same as exiting with an exitstatus. * remote.c: Don't try to kill program after getting an 'X' response. * infrun.c (wait_for_inferior): Add comment about kill versus mourn. Thu Dec 8 12:37:38 1994 Rob Savoye * config/pa/tm-pro.h tm-hppap.h, hppapro.mt: Rename tm-hppap.h to tm-pro.h. Wed Dec 7 18:22:59 1994 Stan Shebs * source.c: Various cosmetic changes. (forward_search_command): Handle very long source lines correctly. Wed Dec 7 13:21:47 1994 Rob Savoye * hppa-tdep.c: Use GDB_TARGET_IS_PA_ELF so SOM target support will stop being linked in. * config/pa/tm-hppap.h: New file. Set GDB_TARGET_IS_PA_ELF, otherwise it looks like BSD-ELF. Mon Dec 5 21:43:52 1994 Stu Grossman (grossman@cygnus.com) * inftarg.c: include to get def of pid_t. Fri Dec 2 15:03:07 1994 Stan Shebs * solib.c (auto_solib_add_at_startup): New global. (solib_create_inferior_hook): Call solib_add only if auto_solib_add_at_startup is nonzero. (_initialize_solib): New command "set auto-solib-add". Fri Dec 2 12:52:04 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * parse.c (msymbol_addr_type): Replaced by lookup_pointer_type (builtin_type_void). * printcmd.c (_initialize_printcmd): Give examine_*_type a name for `ptype $_'. Fri Dec 2 12:52:04 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * printcmd.c (print_formatted): Call val_print_string directly, rather than via value_print. Wed Nov 30 22:27:27 1994 Jeff Law (law@snake.cs.utah.edu) * somsolib.c (som_solib_get_got_by_pc): New function. * somsolib.h (som_solib_get_got_by_pc): Add extern decl. * hppa-tdep.c (hppa_fix_call_dummy): Handle case where FUN is the function's export stub or real address in a shared library. Tue Nov 29 13:40:25 1994 J.T. Conklin (jtc@rtl.cygnus.com) * config/i386/nbsd.mh (REGEX, REGEX1): No longer define. * configure.in (i[345]86-*-freebsd*): New configuration. * config/i386/{fbsd.mh,fbsd.mt,nm-fbsd.h}: New files. Tue Nov 29 12:23:25 1994 Stan Shebs (shebs@andros.cygnus.com) * top.c (read_next_line): Pass annotation suffix "commands" instead of "command", matches documentation. Mon Nov 28 14:53:21 1994 Stan Shebs (shebs@andros.cygnus.com) * config/a29k/tm-a29k.h (setup_arbitrary_frame): Replace FRAME_ADDR with CORE_ADDR in prototype. * top.c (command_line_input): If annotation suffix is NULL, replace it with an empty string. (read_next_line): Pass "command" as annotation suffix to command_line_input. Mon Nov 28 11:03:14 1994 J.T. Conklin (jtc@rtl.cygnus.com) * config/rs6000/tm-rs6000.h (setpgrp): move defn from here... * config/rs6000/xm-rs6000.h: ...to here. Mon Nov 28 09:17:20 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl (build_framework): Fix bug with setting window titles. * gdbtk.tcl (build_framework): Add "Report bug" to help menu. * gdbtk.tcl: Re-arrange windows using new, consistent layout. Clean up lots of code and centralize framework initialization. Fri Nov 25 21:26:02 1994 Jeff Law (law@snake.cs.utah.edu) * tm-hppa.h (skip_trampoline_code): Add extern decl. * hppa-tdep.c (hppa_pop_frame): Silently restart the inferior and allow it to execute any return path trampoline code. Stop the inferior and give the user control when the trampoline has finished executing. (in_solib_call_trampoline): Handle export stubs which also perform parameter relocations. (in_solib_return_trampoline): Likewise. Fri Nov 25 13:37:10 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * coffread.c, symfile.h (coff_getfilename): Make it static again. * xcoffread.c (coff_getfilename): Use a static copy from coffread.c, modified for accessing the static xcoff strtbl. Fri Nov 25 00:51:05 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (in_solib_call_trampoline): Recognize calls through _sr4export and $$dyncall as trampolines. Likewise for long-call stubs and parameter relocation stubs. (in_solib_return_trampoline): Recognize a return trampoline for return value relocation stubs. * hpread.c: Include hp-symtab.h instead of hpux-symtab.h. Various name changes to match those used by hp-symtab.h. Thu Nov 24 00:39:27 1994 Jeff Law (law@snake.cs.utah.edu) * blockframe.c (find_pc_partial_function): Inhibit mst_trampoline symbol special handling when INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK is defined. * infrun.c (IN_SOLIB_CALL_TRAMPOLINE): Renamed from IN_SOLIB_TRAMPOLINE. All callers changed. (IN_SOLIB_RETURN_TRAMPOLINE): Provide default definition. (wait_for_inferior): Handle single stepping through trampolines on return paths from shared libraries. * config/pa/tm-hppa.h (IN_SOLIB_CALL_TRAMPOLINE): Use in_solib_call_trampoline. (IN_SOLIB_RETURN_TRAMPOLINE): Use in_solib_return_trampoline. (INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK): Define. * hppa-tdep.c (in_solib_call_trampoline): New function. (in_solib_return_trampoline): New function. Wed Nov 23 21:43:03 1994 Steve Chamberlain (sac@jonny.cygnus.com) * tm-h8300.h (REMOTE_BREAKPOINT): Define. * h8300-tdep.c (h8300_pop_frame): Remove redundant call. * remote-e7000.c (HARD_BREAKPOINTS): Reenable. (BC_BREAKPOINTS): Disable. * sh-tdep.c (print_insn): Cope with big and little endian machines. * sh/sh.mt: Use libsim.a * sh/tm-sh.h (TARGET_BYTE_ORDER_SELECTABLE): New (BREAKPOINT): Changed to be byteorder independent. Tue Nov 22 19:13:39 1994 Stan Shebs (shebs@andros.cygnus.com) Maintenance commands to report time and space usage. * main.c (display_time, display_space): New globals. (main): Add argument --statistics to enable reporting, display time and space after startup is done. * maint.c (maintenance_time_display, maintenance_space_display): New commands. * top.c (command_loop): Display time and space after command execution. * top.c (pre_init_ui_hook): New global. (gdb_init): If pre_init_ui_hook set, call before all other init. Tue Nov 22 10:25:59 1994 Kung Hsu (kung@mexican.cygnus.com) * a29k-tdep.c (examine_tag): Fix a bug in stack frame size. Sat Nov 19 03:10:51 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/i386/i386sol2.mh: Reenable core file support. * symfile.c (deduce_language_from_filename): Treat .c++ as a C++ extension. * valops.c (destructor_name_p): Do not compare the template part for template classes. Fri Nov 18 14:55:59 1994 Stan Shebs (shebs@andros.cygnus.com) * defs.h, infcmd.c (reg_names): Don't declare as constant. * remote-mips.c (mips_open): Read and set the processor type. * mips-tdep.c (mips_set_processor_type): Always return an int. Fri Nov 18 10:38:12 1994 J.T. Conklin * nlm/alpha.c (strtol): Remove, it is provided by NetWare C library. * nlm/gdbserve.def (strtol): Add to import list. * nlm/fake_aio.c: Remove file, no longer used. * Makefile.in (LD_FOR_TARGET, NLMCONV_FOR_TARGET): Remove. * nlm/Makefile.in (gdbserve.O): Link with ${CC_FOR_TARGET}. (LD_FOR_TARGET): Remove. Thu Nov 17 22:09:50 1994 Rob Savoye * monitor.h, monitor.c, w89k-rom.c, op50n-rom.c, idp-rom.c: Add support for two variables used to control the load protocol and conversion type. Thu Nov 17 17:51:12 1994 Stan Shebs (shebs@andros.cygnus.com) Support for different MIPS IDT processor models. * mips-tdep.c (mips_processor_type, tmp_mips_processor_type, mips_generic_reg_names, mips_r3041_reg_names, mips_r3051_reg_names, mips_r3081_reg_names, mips_processor_type_table): New globals. (mips_do_registers_info): Don't display register if name is empty. (mips_set_processor_type_command): New command. (mips_show_processor_type_command): New command. (mips_set_processor_type): New function. (mips_read_processor_type): New function. * config/mips/tm-idt.h (DEFAULT_MIPS_TYPE): New macro. * config/mips/tm-mips.h (DEFAULT_MIPS_TYPE): New macro. (NUM_REGS): Increase to account for all CP0 registers. (REGISTER_NAMES): Add empty names for CP0 registers. (FIRST_EMBED_REGNUM, LAST_EMBED_REGNUM): Adjust. (PRID_REGNUM): New macro. Wed Nov 16 16:41:52 1994 Stan Shebs (shebs@andros.cygnus.com) * README: Add warning about termcap in Ultrix and OSF/1. Wed Nov 16 15:28:29 1994 Rob Savoye (rob@cygnus.com) * Makefile.in: Fix the test for installing gdbtk. * hppa-tdep.c: Remove including sys/dir.h from a target file. Wed Nov 16 10:31:27 1994 J.T. Conklin (jtc@cygnus.com) * config/powerpc/gdbserve.mt (TDEPFILES): Remove fake_aio.o. * nlm/gdbserve.c: Include before other NetWare headers. * nlm/ppc.c: Likewise. * nlm/ppc.c (strtol): Remove, it is provided by NetWare C Library. (StopBell): New function (stubbed out). Wed Nov 16 00:12:21 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (skip_trampoline_code): Handle shared library import trampolines. Tue Nov 15 16:18:52 1994 Kung Hsu (kung@mexican.cygnus.com) * c-exp.y (yylex): Fix a bug in template scanning. Tue Nov 15 14:25:47 1994 Stan Shebs (shebs@andros.cygnus.com) * i386-stub.c, m68k-stub.c, sparc-stub.c, sparcl-stub.c: Mask out the top bit returned by getDebugChar. Tue Nov 15 01:03:56 1994 Rob Savoye (rob@slipknot.cygnus.com) * op50-rom.c, w89k-rom.c, monitor.c: Modify to usr two variables to set remote load type and protocol. * rom68k-rom.c: Add to_stop in target_ops. Mon Nov 14 08:51:29 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in: Install gdbtk.tcl. * configure.in: Add ENABLE_GDBTK flag. * gdbtk.c (gdb_sourcelines): Returns list of source lines containing code. (gdb_regnames): Returns list of register names. Sat Nov 12 21:55:47 1994 Jeff Law (law@snake.cs.utah.edu) * somsolib.c: Add TODO list. (som_solib_add): Immediately return if $SHLIB_INFO$ sections does not exist or has size zero. Slightly simplify error handling. Keep an internal list of all the loaded shared libraries and various tidbits of information about the loaded shared libraries. Build section tables for each loaded shared library and add those tables to the core target if necessary. (som_solib_create_inferior_hook): Force re-reading of shared libraries at exec time. (som_sharedlibrary_info_command): New function for dumping information about the currently loaded shared libraries. (_initialize_som_solib): New function. Sat Nov 12 02:26:50 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * Makefile.in (copying.o, f-exp.tab.o, dpx2-nat.o, dstread.o, i386aix-nat.o, i386m3-nat.o, irix5-nat.o, lynx-nat.o, m3-nat.o, mipsm3-nat.o, ns32km3-nat.o, remote-e7000.o, remote-os9k.o): Add dependencies. (copying.o, os9kread.o, remote.o): Update dependencies. * valarith.c (value_sub): When subtracting pointers, only check for a match of the pointed to element lengths. Cast element length to LONGEST to obtain a signed result for pointer subtractions. Fri Nov 11 10:51:07 1994 Jeff Law (law@snake.cs.utah.edu) * ch-exp.y (yylex): Fix off-by-one error when converting string to lowercase. Null terminate new string. * hppa-tdep.c (rp_saved): Handle IMPORT stubs too. * somsolib.c (som_solib_add): Check the value of __dld_flags, if it indicates __dld_list is not valid return an error. If it indicates that libraries were not mapped privately, issue a warning. Thu Nov 10 23:17:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * symfile.c (syms_from_objfile): Only call find_lowest_section if no ".text" section exists. Thu Nov 10 15:16:21 1994 Rob Savoye * rom68k-rom.c: New file. Replaces the old remote-mon.c and uses the new generic ROM interface in monitor.c. * config/m68k/monitor.mt: Use new ROM support. * monitor.c: Add support for xmodem download protocol. Wed Nov 9 18:46:24 1994 Stan Shebs (shebs@andros.cygnus.com) * findvar.c (find_saved_register): Fix a frame variable name. * infcmd.c (finish_command): Ditto. Tue Nov 8 13:20:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Remove "Watchpoints seem not entirely reliable, though they haven't failed me recently." item--this old (4.6 at least) item is too vague to be useful (some watchpoint bugs have been fixed since then). * TODO: Add explanation of "RPC interface" item. Mon Nov 7 22:25:21 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (read_unwind_info): Use "text_offset" for linker stub unwind descriptors too. * Enable backtracing from inside a SOM shared library back into user code. * hppa-tdep.c (internalize_unwinds): Accept and use new "text_offset" argument for dynamic relocation of region_{start,end} fields in the unwind descriptor. (read_unwind_info): Pass text_offset to internalize unwinds. Mon Nov 7 14:34:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * m3-nat.c: Remove comments about arbitrary limit in printf_filtered; that limit is gone. Mon Nov 7 00:27:16 1994 Jeff Law (law@snake.cs.utah.edu) * Beginnings of SOM shared library support. Breakpoints and single frame backtracing within the library only. Only works when using the HPUX 9 dynamic linker. More functionality to be added soon. * somsolib.c, somsolib.h: New files. * Makefile.in (HFILES_NO_SRCDIR): Add somsolib.h (ALLDEPFILES): Add somsolib.c. (somsolib.o): Add some dependencies. * somread.c (som_symtab_read): Accept multiple section offsets. All callers changed. Adjust all text symbols with the first section offset. * symfile.c (find_lowest_section): Enable this function. Add some tie-breaking logic when sections have the same vma. (syms_from_objfile): Use find_lowest_section rather than looking for ".text" by name. Relax warning to only warn if the lowest section is not a code section. * config/pa/{hppabsd.mh, hppahpux.mh} (NATDEPFILES): Add somsolib.o * config/pa/{nm-hppab.h, nm-hppah.h}: Include somsolib.h. Sun Nov 6 12:54:54 1994 Jeff Law (law@snake.cs.utah.edu) * partial-stab.h (N_TEXT): Put back GDB_TARGET_IS_HPPA kludge, it is still needed for GCC-2.6 compiled code. * TODO (GDB_TARGET_IS_HPPA): Note this kludge can be nuked sometime after GCC-2.7 has been released. * hppa-tdep.c (frame_saved_pc): Mask off low two bits when retrieving the PC from a signal handler caller. Fix thinko in Stan's last change ("frame", should have been "frame->next"). If the next frame is a signal handler caller and it's a system call which has entered the kernel ((PSW & 0x2) != 0), then the saved pc is in %r2 instead of %r31. Fri Nov 4 23:47:07 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (hppa_frame_find_saved_regs): Change "frame" to "frame_info" throughout. Fri Nov 4 16:26:59 1994 Kung Hsu (kung@mexican.cygnus.com) * sparcl-stub.c: get rid of defs.h. Fri Nov 4 13:11:54 1994 Jim Kingdon * gdbserver/Makefile.in (MMALLOC_CFLAGS): Add -I${MMALLOC_DIR}. Correct definition of MMALLOC_DIR to reflect fact this is gdb/gdbserver/Makefile.in, not gdb/Makefile.in. * gdbserver/server.c (main): After we kill the inferior in response to a 'k' request, exit. * remote.c (remote_kill): Use catch_errors when calling putpkt. (putpkt): Return int, not void, to match catch_errors calling convention. Fri Nov 4 10:52:38 1994 Stan Shebs (shebs@andros.cygnus.com) * rs6000-tdep.c (pop_frame): Correct a variable name. Fri Nov 4 05:43:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Re-write item about SIGINT handling to reflect the fact that target_stop now exists. Thu Nov 3 15:19:17 1994 Stan Shebs (shebs@andros.cygnus.com) Replace useless FRAME, FRAME_ADDR types with struct frame_info * and CORE_ADDR, respectively. * frame.h (FRAME, FRAME_INFO_ID, FRAME_ADDR): Remove. * blockframe.c (get_frame_info): Remove. * a29k-tdep.c, alpha-tdep.c, blockframe.c, breakpoint.c, breakpoint.h, energize.c, findvar.c, gould-pinsn.c, h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, i386-tdep.c, i960-tdep.c, infcmd.c, inferior.h, infrun.c, m68k-tdep.c, m88k-tdep.c, mips-tdep.c, nindy-tdep.c, printcmd.c, pyr-tdep.c, rs6000-tdep.c, sh-tdep.c, sparc-tdep.c, stack.c, valops.c, z8k-tdep.c, config/a29k/tm-a29k.h, config/alpha/tm-alpha.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h, config/mips/tm-mips.h, config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h, config/pyr/tm-pyr.h, config/sparc/tm-sparc.h): Replace FRAME with struct frame_info * everywhere, replace FRAME_ADDR with CORE_ADDR, rename variables consistently (using `frame' or `fi'), remove calls to get_frame_info and FRAME_INFO_ID, remove comments about FRAME and FRAME_ADDR cruftiness. Thu Nov 3 14:25:24 1994 Stu Grossman (grossman@cygnus.com) * corelow.c, exec.c, inftarg.c, m3-nat.c, op50-rom.c, procfs.c, remote-adapt.c, remote-e7000.c, remote-eb.c, remote-es.c, remote-hms.c, remote-mips.c, remote-mm.c, remote-mon.c, remote-nindy.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-vx.c, remote-z8k.c, remote.c, w89k-rom.c, target.c, target.h: Add support for target_stop(). * gdbtk.c (gdb_stop): Switch to target_stop(). Thu Nov 3 01:23:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * osfsolib.c (solib_map_sections, first_link_map_member, next_link_map_member, xfer_link_map_member): Retrieve and use shared library relocation offset from runtime loader structures. Use libxproc.a routines to get a working version if USE_LDR_ROUTINES is defined. * README: Remove item about shared library relocation for Alpha OSF/1. Wed Nov 2 15:05:39 1994 Kung Hsu (kung@mexican.cygnus.com) * c-exp.y (yylex): scan template names, and scan nested class names. Wed Nov 2 11:01:55 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * nlm/Makefile.in: install gdbserve.nlm. Tue Nov 1 16:41:12 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in: Use $(objdir)/tcl and $(objdir)/tk if they are available. * configure.in (ENABLE_CLIBS): Use $(TCL) and $(TK) instead of -ltcl and -ltk. * gdbtk.c: Get rid of lots of unnecessary #includes. * (gdbtk_init): Use ConnectionNumber macro instead of referencing Display structure directly. * gdbtk.tcl: Change exit button to quit button. Tue Nov 1 13:00:46 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * c-valprint.c (c_value_print): Check for plain literal `char' target type when suppressing `(char *)' output for strings. Mon Oct 31 19:19:51 1994 Stan Shebs (shebs@andros.cygnus.com) * coffread.c (coff_symfile_init): Remove unused local abfd. * utils.c [NO_MMALLOC] (mmalloc, mrealloc): Define and use size_t instead of long, for compatibility with mmalloc.h. Sat Oct 29 02:40:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * top.c (line_completion_function): Renamed from symbol_completion_function, takes the line buffer and the point in the line buffer as additional arguments. (readline_line_completion_function): New function, interface between readline and line_completion_function. (init_main): Use it. (complete_command): Use line_completion_function instead of abusing rl_line_buffer. Free completion strings after printing them. * symtab.c (completion_list_add_name): Recheck for duplicates if we intend to add a modified symbol. * gdbtypes.h (cplus_struct_type): nfn_fields_total no longer includes the number of methods from the baseclasses. * stabsread.c (attach_fn_fields_to_type): No longer add the number of methods from the baseclasses to TYPE_NFN_FIELDS_TOTAL, the baseclass type might not have been completely filled in yet. * symtab.c (total_number_of_methods): New function to compute the total number of methods for a type, including the methods from baseclasses. (decode_line_1): Use it instead of TYPE_NFN_FIELDS_TOTAL to allocate the symbol array for find_methods. * stabsread.c (scan_file_globals): Add default case to minimal symbol type switch, to avoid gcc -Wall warnings. * config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO): Don't test for zero backchain pointer to recognize a signal handler frame, if read() gets interrupted by a signal, the backchain will be non zero. (SIG_FRAME_FP_OFFSET): Move to here from rs6000-tdep.c, improve comment. (SIG_FRAME_PC_OFFSET): New definition. (FRAME_SAVED_PC): Return saved pc from sigcontext if this is a signal handler frame. * rs6000-tdep.c (function_frame_info): Do not error out if we can't access the instructions. * config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): New definition to get the function address from a function pointer. * valops.c (find_function_addr): Use it when calling a user function through a function pointer. Fri Oct 28 16:16:52 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (MMALLOC_DIR): New definition. (MMALLOC): Use MMALLOC_DIR. (MMALLOC_CFLAGS): Look in MMALLOC_DIR for mmalloc.h. (OPCODES): Remove gratuitous "./". * defs.h (mmalloc.h): Include. (mmalloc, mrealloc, etc): Remove decls. (cplus_demangle, cplus_demangle_opname): Remove decls. Wed Oct 26 15:41:07 1994 Stu Grossman (grossman@cygnus.com) * defs.h, main.c, top.c: Change sense and name of no_windows variable. Now called use_windows, and defaults to off (for compatibility). * gdbtk.c: Ditto. Wed Oct 26 12:20:53 1994 Jim Kingdon * coffread.c (coff_symtab_read): If we get the address from target_lookup_symbol, set the section to -2 not SECT_OFF_BSS. (coff_symtab_read): Set value and section of symbol that process_coff_symbol returns. Tue Oct 25 09:53:04 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * config/i386/tm-nbsd.h: Enable longjmp support. Sat Oct 22 03:41:13 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * valarith.c (value_binop): Take care of ANSI `value preserving' rule, which was not addressed by the previous change. * rs6000-tdep.c (skip_prologue): Handle `mr r31,r1', which is generated by gcc-2.6, as a synonym for `oril r31,r1,0'. * TODO: Remove item about RS/6000 shared libraries. Thu Oct 20 17:35:45 1994 Stu Grossman (grossman@cygnus.com) * defs.h, infrun.c (wait_for_inferior), top.c: Call target_wait_hook to allow GUI to handle blocking for inferior. Call call_command_hook in execute_command to provide means for wrapping commands with GUI state change updates. * gdbtk.c (gdb_cmd): Force GUI into idle mode when errors occur. * (gdb_stop): New tcl command to stop the target process. * (x_event, gdbtk_wait): Allow GUI to interrupt gdb out of target waits. * (gdbtk_call_command): Wrapper around command processing to alert GUI of target state changes. * (gdbtk_init): Get the fd of X server for doing async notification of X events (via x_event). Setup new hooks. * gdbtk.tcl: Add scrollbars to assembly and command windows. * Change window foreground & background colors. * Create margin tag for breakpoints in source and assembly windows. * Add new routines to be invoked when target state changes to/from idle. * Add start of expression window. * Change bindings of mouse button 1 in assembly and source window to just set or clear breakpoints when in the margin tag. * Change shape of register window to be more vertical to better reflect its contents. * Add stop button. * Cleanup some code around command window bindings. * infrun.c (wait_for_inferior): Make sure through_sigtramp_breakpoint is non-null before deleting. Thu Oct 20 10:26:43 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * config/powerpc/ppc-nw.mt (TDEPFILES): Removed exec.o. Thu Oct 20 06:56:07 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (coffread.o): Depend on target.h. (remote-vx.o): Depend on gdb-stabs.h objfiles.h symfile.h $(bfd_h). Wed Oct 19 22:49:31 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Fix typo. Wed Oct 19 11:32:15 1994 Jim Kingdon * objfiles.c (objfile_relocate): When relocating ->sections, use objfile not symfile_objfile. * symtab.h, minsyms.c (minsyms_sort): New function. * objfiles.c (objfile_relocate): Call it. * remote-vx.c (vx_add_symbols): Call breakpoint_re_set. * objfiles.c, objfiles.h (objfile_to_front): New function. * remote-vx.c (vx_add_symbols): Call it. * coffread.c (coff_symtab_read): Handle common symbols the same way that partial-stab.h does. Wed Oct 19 21:06:12 1994 Rob Savoye (rob@cirdan.cygnus.com) * hppa-tdep.c: Remove include files a.out.h, ioctl.h, and machine/psl.h. These are host files. Wed Oct 19 15:13:51 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * objfiles.h (struct objfile): Fix comment--minimal_symbol_count does *not* include the terminating NULL msymbol. Tue Oct 18 20:53:29 1994 Rob Savoye * monitor.c (monitor_load_srec,monitor_make_srec): Add an asrecord loader that reads files using BFD and converts it on the fly. Mon Oct 17 18:52:06 1994 Rob Savoye * monitor.c (set_loadtype_command): Fixed so it doesn't core dump. * monitor.c (monitor_load): check the load type and load the file accordingly. Default to gr_load_image(). * monitor.c (monitor_load_ascii_srec): Load an ascii file in srecord format by downloading to the monitor. * w89k-rom.c, op50n-rom.c: set supported load types. Mon Oct 17 10:29:08 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (ALLDEPFILES): Remove xcoffexec.c. * Makefile.in: Remove xcoffexec.o rule. * exec.c (exec_file_command): Add comment. Fix data and bss relocation for VxWorks 5.1: * remote-vx.c (vx_add_symbols): New function. (vx_load_command, add_symbol_stub): Call it instead of symbol_file_add. (vx_wait): Remove comment which was wrong to useless. * remote-vx.c: Reindent much of file. * coffread.c (cs_to_section, find_targ_sec): New functions. (process_coff_symbol): Set SYMBOL_SECTION to result from cs_to_section. (coff_symtab_read): Call cs_to_section and deal with result rather than assuming sections are in a certain order. Deal with BSS. * coffread.c: Remove text_bfd_scnum variable. Sat Oct 15 16:55:48 1994 Stan Shebs (shebs@andros.cygnus.com) * corelow.c: Format to standard. (core_close): Use name instead of bfd_filename. Fri Oct 14 10:29:08 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * exec.c (map_vmap): Cast return from xmalloc to its proper type, not to PTR. * symfile.c (reread_symbols): Include bfd_errmsg string in error message if bfd_close fails. * exec.c (exec_close), solib.c (clear_solib), corelow.c (core_close), objfiles.c (free_objfile), irix5-nat.c (clear_solib), osfsolib.c (clear_solib), remote-utils.c (gr_load_image): Check for errors from bfd_close. * solib.c (look_for_base), remote-utils.c (gr_load_image), remote-udi.c (download), corelow.c (core_open), symfile.c (symfile_bfd_open), symfile.c (generic_load): Add comment regarding error from bfd_close. * remote-udi.c (download), remote-utils.c (gr_load_image): Add comment about bogus handling of errors from bfd_openr. * exec.c (exec_close): Add comment regarding memory leak and dangling reference to vp->name. Sat Oct 15 03:43:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * eval.c (evaluate_subexp): Make fnptr a LONGEST instead of using longest_to_int. * infcmd.c (run_stack_dummy): Reinstate set_current_frame call, mips and alpha targets need the real breakpoint pc for creating the breakpoint frame. * stack.c (return_command): Cast return value to the return type of the function from which we return. * values.c (set_return_value): Pass VALUE_CONTENTS unmodified to STORE_RETURN_VALUE. * symtab.c (lookup_symbol): Remove search for `static mangled symbols', the search for `static symbols' already looks for mangled and demangled symbols via lookup_block_symbol. * valarith.c (value_binop): Use ANSI C arithmetic conversions when performing integral evaluations, implement BINOP_EQUAL and BINOP_LESS. (value_equal, value_less): Use value_binop to perform the comparison if both operands have TYPE_CODE_INT. * rs6000-tdep.c (pop_frame): Make sure all registers are valid, as they are written back later. Handle sp restore for frameless functions. Use fdata.nosavedpc instead of fdata.frameless to determine if the pc has been saved. (function_frame_info): Handle `mr r31,r1', which is generated by gcc-2.6, as a synonym for `oril r31,r1,0'. (skip_trampoline_code): Handle shared library trampolines. * xcoffread.c (read_xcoff_symtabs): Record XMC_GL symbols with their real name. Enables setting of breakpoints in shared libraries before the executable is run. Fri Oct 14 19:39:47 1994 Rob Savoye * monitor.h, remote-mon.c: Hack up to so the old ROM monitor interface code still works with the new ROM monitor structures. Fake out a couple of fields. Fri Oct 14 14:54:37 1994 Stan Shebs (shebs@andros.cygnus.com) * h8500-tdep.c (target_read_sp, target_write_sp, target_read_pc, target_write_pc, target_read_fp, target_write_fp): Rename to h8500_read_sp, etc. (h8500_read_pc, h8500_write_pc): Add pid argument. * config/h8500/tm-h8500.h (TARGET_READ_SP, TARGET_WRITE_SP, TARGET_READ_PC, TARGET_WRITE_PC, TARGET_READ_FP, TARGET_WRITE_FP): Change to match functions above. Thu Oct 13 13:24:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * NEWS: Add item about if and while. * .gdbinit: Restore `end'; it was not excess. Reindent list-objfiles to make this clear. Comment out all of list-objfiles because old gdb's choke on it. Wed Oct 12 23:19:08 1994 Ian Lance Taylor * config/mips/tm-bigmips64.h: Just define TARGET_BYTE_ORDER and include tm-mips64.h. Wed Oct 12 18:02:17 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (ANNOTATE_OBS): New definition. (COMMON_OBS): Add exec.o. (annotate.o): Remove extra compile rule. * config/*/*.mh, config/*/*.mt: Remove exec.o from *DEPFILES lists everywhere. * .gdbinit: Remove excess `end'. * exec.c: Merge in RS6000 support from xcoffexec.c. (symfile.h, objfiles.h, xcoffsolib.h): Include. (vmap): New global variable. (exec_close): Close and free objects in vmap chain. (exec_file_command) [IBM6000_TARGET]: Set up initial vmap. (bfdsec_to_vmap, map_vmap): Moved here from xcoffexec.c. (exec_files_info): Print vmap information. * xcoffexec.c: Remove. * config/rs6000/rs6000.mt, config/rs6000/rs6000lynx.mt (TDEPFILES): Use exec.o instead of xcoffexec.o. * TODO: Remove pertinent items. Wed Oct 12 10:08:19 1994 Jeff Law (law@snake.cs.utah.edu) * partial-stab.h (N_TEXT): Delete GDB_TARGET_IS_HPPA kludge; they are no longer needed as of gcc-2.6.0. Tue Oct 11 15:51:01 1994 Ian Lance Taylor * lynx-nat.c (child_wait): Correct handling of byte reversed SPARC Lynx wait status. (fetch_core_registers): Don't try to fetch a register if regmap maps it to -1. * sparc-tdep.c (sparc_frame_find_saved_regs): Use FRAME_SAVED_I0 and FRAME_SAVED_L0 when setting saved_regs_addr. SPARC Lynx stores the registers in a weird order. Sat Oct 8 20:59:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * blockframe.c (reinit_frame_cache): Reinstate select_frame call if inferior_pid is nonzero. Sat Oct 8 04:27:21 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Speed up GDB startup time by not demangling partial symbols. * symfile.h (ADD_PSYMBOL_VT_TO_LIST), symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): No longer demangle partial symbols. * symtab.c (lookup_symbol, list_symbols): Handle mangled variables, e.g. C++ static members, via the minimal symbols. Handle reordered functions in an objfile, for Irix 5.2 shared libraries. * objfiles.h (OBJF_REORDERED): New bit in the objfile flags, set if the functions in an objfile are reordered. * mdebugread.c (parse_partial_symbols): Detect reordered functions in an objfile. * symtab.c (find_pc_psymtab, find_pc_symtab): Use expensive lookup algorithm if the functions in the objfile are reordered. * xcoffexec.c (exec_close): If the current target has a copy of the exec_ops sections, reflect the freeing of the sections in current_target. * valops.c (call_function_by_hand): Use `sizeof dummy1', not `sizeof dummy', for constructing the call dummy code. * config/sparc/tm-sparc.h: Add PARAMS declarations to all function declarations. * sparc-tdep.c (sparc_pop_frame): Cast result of read_memory_integer to CORE_ADDR when passing it to PC_ADJUST. * irix5-nat.c (enable_break): Set breakpoint at the entry point of the executable, to handle the case where main resides in a shared library. * irix5-nat.c (solib_create_inferior_hook): Reset stop_soon_quietly after shared library symbol reading, to get rid of a warning from heuristic_proc_start if the startup code has no symbolic debug info. * breakpoint.h (struct breakpoint): Add new fields language and input_radix, to enable breakpoint resetting with the proper language and radix. * breakpoint.c (set_raw_breakpoint): Initialize them. (breakpoint_re_set_one): Use them when resetting the breakpoint. (breakpoint_re_set): Preserve current language and input_radix across breakpoint_re_set_one calls. * symtab.c (decode_line_1): Do not build a canonical line specification for `*expr' line specifications. * breakpoint.h (bpstat_stop_status): Fix prototype declaration. Fri Oct 7 08:48:18 1994 Jim Kingdon (kingdon@lioth.cygnus.com) The point of these changes is to avoid reading the frame pointer and stack pointer during stepping, to speed things up. A. Changes to not select a frame until we need a selected frame: * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1). * infrun.c (wait_for_inferior): Move call to select_frame back to normal_stop. This reverts a change of 13 Apr 94 (it says Jeff Law, but the change was my idea); the only reason for that change was so we could save and restore the selected frame in wait_for_inferior, and now that flush_cached frames clears the selected frame, that should work OK now. B. Changes to not create a current_frame until we need one: * blockframe.c (get_current_frame): If current_frame is NULL, try to create an innermost frame. * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy), infrun.c (wait_for_inferior), thread.c (thread_switch), convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame), alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command), h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame), hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame), i960-tdep.c (pop_frame), m68k-tdep.c (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c (pop_frame), config/arm/tm-arm.h (POP_FRAME), config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME), config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't call create_new_frame. * corelow.c (core_open), altos-xdep.c (core_file_command), arm-xdep.c (core_file_command), gould-xdep.c (core_file_command), m3-nat.c (select_thread), sun386-nat.c (core_file_command), umax-xdep.c (core_file_command): Don't call create_new_frame; do call flush_cached_frames. * blockframe.c (reinit_frame_cache): Don't call create_new_frame or select_frame. C. Changes to get rid of stop_frame_address and instead only fetch the frame pointer when we need it. * breakpoint.c (bpstat_stop_status): Remove argument frame_address; use FRAME_FP (get_current_frame ()). * infrun.c (wait_for_inferior): Don't pass frame pointer to bpstat_stop_status. * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame ()) instead of stop_frame_address. * infrun.c (save_inferior_status, restore_inferior_status), inferior.h (struct inferior_status): Don't save and restore stop_frame_address. * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c (select_thread): Remove stop_frame_address and uses thereof. D. Same thing for the stack pointer. * infrun.c (wait_for_inferior): Remove stop_sp and replace uses thereof with read_sp (). E. Change to eliminate one nasty little spot where we were wanting to know the frame pointer from before the current step (idea from GDB 3.5, which saved my ass, because my other ideas of how to fix it were very baroque). * infrun.c: Remove prev_frame_address. * infrun.c (wait_for_inferior, step_over_function): Use step_frame_address instead of prev_frame_address. F. Same basic idea for the stack pointer. * inferior.h, infcmd.c: New variable step_sp. * infcmd.c (step_1, until_next_command): Set it. * infrun.c: Remove prev_sp and replace uses by step_sp. * infrun.c (wait_for_inferior): If we get out of the step range, then set step_sp to the current stack pointer before we start going again. Fri Oct 7 12:17:17 1994 Ian Lance Taylor * top.c (target_byte_order_auto): New static variable. (set_endian): Mention that ``auto'' is permitted. (set_endian_auto): New static function. (show_endian): Change message based on target_byte_order_auto. (set_endian_from_file): New function. (init_main): Add command ``auto'' to endianlist. * exec.c (exec_file_command): Call set_endian_from_file. * defs.h (set_endian_from_file): Declare. Thu Oct 6 18:10:41 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * nlm/i386.c (flush_i_cache): New function, does nothing. (frame_to_registers, registers_to_frame, set_step_traps, clear_step_traps, do_status): Make non-static. Thu Oct 6 12:26:42 1994 Ian Lance Taylor * config/mips/tm-mips.h (GDB_TARGET_IS_MIPS64): If not already defined, define as 0. (FIX_CALL_DUMMY): Rewrite to remove presumption that host and target are similar. * config/mips/tm-idt.h (TARGET_BYTE_ORDER_SELECTABLE): Define. * config/mips/tm-idtl.h (TARGET_BYTE_ORDER_SELECTABLE): Define. * config/mips/tm-idt64.h (TARGET_BYTE_ORDER_SELECTABLE): Define. (BREAKPOINT): Remove definition. * config/mips/tm-idtl64.h (TARGET_BYTE_ORDER_SELECTABLE): Define. (BREAKPOINT): Remove definition. * config/mips/tm-mips64.h (GDB_TARGET_IS_MIPS64): Define with a value of 1, rather than without a value. * config/mips/tm-bigmips64.h (GDB_TARGET_IS_MIPS64): Likewise. * mips-tdep.c: Rewrite uses of GDB_TARGET_IS_MIPS64 to switch at run time rather than at compile time. * remote-mips.c (break_insn): Remove. (BREAK_INSN, BREAK_INSN_SIZE): Define. (mips_insert_breakpoint): Use BREAK_INSN, not break_insn. (mips_remove_breakpoint): Likewise. * defs.h: If TARGET_BYTE_ORDER_SELECTABLE is defined by tm.h, define TARGET_BYTE_ORDER as target_byte_order, and declare target_byte_order as an extern int, and define BITS_BIG_ENDIAN as a test of TARGET_BYTE_ORDER. * top.c: Several additions if TARGET_BYTE_ORDER_SELECTABLE is defined: (endianlist, target_byte_order): New variables. (set_endian, set_endian_big, set_endian_little): New functions. (show_endian): New function. (init_cmd_lists): Initialize endianlist. (init_main): Add commands ``set endian big'', ``set endian little'', and ``show endian''. * a29k-pinsn.c: Rewrite uses of TARGET_BYTE_ORDER and BITS_BIG_ENDIAN to switch at run time rather than at compile time. * coffread.c, dwarfread.c, findvar.c, mips-tdep.c: Likewise. * remote-os9k.c, stabsread.c, valarith.c, valprint.c: Likewise. * values.c: Likewise. Wed Oct 5 11:41:24 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * nlm/configure.in: ${gdb_host_cpu} defaults to ${host_cpu}. * nlm/Makefile.in: Get rid of NWINCLUDES. * config/{alpha,powerpc}/gdbserve.mt: Remove NWINCLUDES. User should now configure with --with-headers. Mon Oct 3 07:48:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdbserver/server.c (main): Silently accept all unrecognized requests and send back a zero length acknowledge. That is what *-stub.c do and is what remote.c expects. Mon Oct 3 05:11:47 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * corelow.c (core_open): Copy the modified to_sections_end vector from current_target to core_ops too. * gdbserver/server.c (main): Silently accept query requests and send back a zero length acknowledge. Fri Sep 30 17:17:21 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * nlm/Makefile.in: Don't define NWINCLUDES. * config/{alpha,powerpc}/gdbserve.mt: define NWINCLUDES. Fri Sep 30 15:59:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdbserver/low-lynx.c (create_inferior): Pass all 4 args to ptrace. Fri Sep 30 06:42:42 1994 Ian Lance Taylor (ian@cygnus.com) * lynx-nat.c (child_wait): Use status.w_status, not status, in arithmetic. status is a `union wait'. * config/nm-lynx.h (PTRACE_ARG3_TYPE): Define to int, not char *. * lynx-nat.c (child_wait): Pass fourth argument to ptrace. Thu Sep 29 08:22:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (read_xcoff_symtab): Fix comment for yesterday's change. Wed Sep 28 17:48:18 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * coffread.c (complete_symtab): If last_source_file is set upon entry, free it. Wed Sep 28 08:59:14 1994 Jim Kingdon (kingdon@cygnus.com) * xcoffread.c (read_xcoff_symtab, case C_FILE): Set main_aux before using it. * xcoffexec.c (exec_close): If quitting, don't call clear_symtab_users. * xcoffread.c (read_xcoff_symtab): Process XTY_LD symbols we were ignoring before. But continue to ignore XMC_DS. Wed Sep 28 00:35:23 1994 Jeff Law (law@snake.cs.utah.edu) * hpread.c (hpread_read_array_type): Do not change the type code to TYPE_CODE_PTR for "char foo[]". Just make it a zero length array type. * hpread.c (hpread_type_translate): Handle T_UNS_LONG types with lengths other than 32bits (HP C 9.69 represents an "unsigned char" as an T_UNS_LONG with length 8). * hpread.c (struct hpread_symfile_info): Delete have_module field and accessor macro. Minor indentation fix. (hpread_build_psymtabs, case K_MODULE): Only start a new psymtab and reset state variables have_name & texthigh if pst is NULL. (hpread_build_psymtabs, case K_SRCFILE): Only reset the name of a partial symbol table if pst is non-NULL. If pst is NULL, then start a new psymtab. (hpread_process_one_debug_symbol, case K_MODULE): Now empty. (hpread_process_one_debug_symbol, case K_SRCFILE): Simplify and correct handling of subfiles. Mon Sep 26 02:59:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * defs.h (misc_command_type): Remove trailing comma from enumerator list. Sun Sep 25 23:19:58 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (frame_saved_pc): Fix thinko in code to dig saved pc out of an interrupt frame. Sun Sep 25 12:50:17 1994 Stan Shebs (shebs@andros.cygnus.com) * infcmd.c (do_registers_info) [INVALID_FLOAT]: Only use if defined. * values.c (unpack_double) [INVALID_FLOAT]: Ditto. * mips-tdep.c (mips_print_register): Don't test float validity. * config/a29k/tm-a29k.h, config/alpha/tm-alpha.h, config/arm/tm-arm.h, config/convex/tm-convex.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h, config/i386/tm-i386v.h, config/i386/tm-sun386.h, config/i960/tm-i960.h, config/m68k/tm-m68k.h, config/m88k/tm-m88k.h, config/mips/tm-mips.h, config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h, config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h, config/rs6000/tm-rs6000.h, config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/z8k/tm-z8k.h (INVALID_FLOAT): Remove definition. Sun Sep 25 06:07:37 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Remove item about adding general multi-threaded stuff; this is done. Remove item about specifying arbitrary locations of stack frames (this works on some machines). Remove item about debugging functions without a frame pointer (this works on some machines). Remove item about re-writing macros which handle frame chaining and frameless functions. They have been re-written at least once since that item was written. Remove item about gdb catching SIGINT when attached; this is done. Remove item about having list_command not read symbols--why bother? Sat Sep 24 17:40:10 1994 Stan Shebs (shebs@andros.cygnus.com) * TODO: Append contents of Projects file. * Projects: Remove. Sat Sep 24 01:47:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * corelow.c (add_solib_stub): Remove copying of to_sections, pass current_target to SOLIB_ADD. The Sep 10 change failed if SOLIB_ADD errored out, or if SOLIB_ADD was trying to access target memory. * corelow.c (core_open): After reading the shared libraries, copy the modified to_sections vector from current_target to core_ops, so that core_close can free it later. * config/rs6000/nm-rs6000.h, rs6000-nat.c (xcoff_relocate_core): Pass down target parameter from SOLIB_ADD and use it instead of directly accessing core_ops. Fri Sep 23 14:58:49 1994 J.T. Conklin (jtc@rtl.cygnus.com) * solib.c: *BSD systems need to be included before . * i386b-nat.c: Add i386_float_info(), etc. * config/i386/nm-nbsd.h: #define FLOAT_INFO. * config/nm-nbsd.h: New file, for generic NetBSD native support. * config/i386/nm-nbsd.h: Use it. * config/sparc/nm-nbsd.h: Use it. * config/ns32k/nm-nbsd.h: Use it. * configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht]. (ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht]. * config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}: New files, support for NetBSD/i386. * config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}: New files, support for NetBSD/ns32k. Tue Sep 20 11:34:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * .gdbinit: Add list-objfiles command. * TODO: Reword item regarding NO_STD_REGS. * coffread.c (record_minimal_symbol, coff_read_enum_type, coff_read_struct_type): Allocate on symbol_obstack, not directly via malloc/savestring. Tue Sep 20 15:42:02 1994 Stan Shebs (shebs@andros.cygnus.com) * TODO: Add more items. * tests: Remove the directory and all of its (obsolete) contents. Tue Sep 20 11:34:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * coffread.c (init_stringtab): When copying length to stringtab, use target format, not host format, since that is what the rest of the code assumes. Mon Sep 19 15:48:10 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * Makefile.in: Removed prelude.o, i386-nlmstub.o, nlmstub.o, nlmstub.nlm, and nlmstub targets. Removed NWSOURCE and NWINCLUDES definitions. * i386-nlmstub.c: Removed. Mon Sep 19 07:48:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dbxread.c (read_dbx_dynamic_symtab): Cast bfd_asymbol_name to char * (from const char *) before assigning. Don't save string we pass to record_minimal_symbol (it already saves it). Sat Sep 17 17:05:14 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl: Let ^U delete lines in the command window. Sat Sep 17 02:26:58 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * cp-valprint.c (static_field_print): New variable, controls printing of static members. (_initialize_cp_valprint): New print set subcommand "static-members". Turn on printing of static members by default. (cp_print_value_fields): Print static members if necessary. * solib.c: Remove inclusion of libelf.h and elf/mips.h. (elf_locate_base): Use only standard BFD functions to collect information about the .dynamic section. Check for DT_MIPS_RLD_MAP tag only if it got defined via the inclusion of . * f-exp.y: Write block for OP_VAR_VALUE. * f-valprint.c (info_common_command): Handle `info common' without an argument correctly. * c-typeprint.c (c_type_print_base): Handle template constructors. * symtab.c (gdb_mangle_name): Handle template method mangling, get rid of GCC_MANGLE_BUG code, which only applied to gcc-2.2.2. Fri Sep 16 16:06:08 1994 Per Bothner (bothner@kalessin.cygnus.com) * gdbtypes.h (TYPE_INDEX_TYPE): New macro. * ch-typeprint.c, ch-valprint.c: Use TYPE_INDEX_TYPE. * ch-valprint.c (chill_val_print): Pass index type directly (instead of its TYPE_TARGET_TYPE) to print_type_scalar. * stabsread.c (read_type): Don't set TYPE_FLAG_TARGET_STUB if the index type is a stub. Fri Sep 16 17:18:44 1994 Stan Shebs (shebs@andros.cygnus.com) * config/i386/{i386aix.mh, i386bsd.mh, i386lynx.mh, i386sco.mh, i386sco4.mh, i386sol2.mh, i386v.mh, i386v32.mh, i386v4.mh, ncr3000.mh, ptx.mh, ptx4.mh}, config/m68k/{altos.mh, apollo68v.mh, delta68.mh, dpx2.mh, hp300bsd.mh, hp300hpux.mh, m68klynx.mh, m68kv4.mh}, config/m88k/{delta88.mh, delta88v4.mh}, config/mips/riscos.mh, config/pa/hppahpux.mh, config/rs6000/rs6000lynx.mh, config/sparc/{sparclynx.mh, sun4sol2.mh}, config/tahoe/tahoe.mh, config/vax/{vaxbsd.mh, vaxult.mh, vaxult2.mh} (REGEX, REGEX1, SYSV_DEFINE): No longer define. * config/i386/i386sco4.mh (MUNCH_DEFINE): No longer define. Fri Sep 16 15:40:34 1994 Stu Grossman (grossman@cygnus.com) * defs.h (QUIT): Call interactive_hook to allow GUI to interrupt. Also, add decl for symtab_to_filename. * gdbtk.c: Replace calls to full_filename with symtab_to_filename. * gdbtk.tcl: New routine pc_to_line replaces in line code. New routine decr replaces in line code. * (create_file_win): Use catch to handle open failures more elegantly. Also, create special window to display file open failure message. Move opening of file prior to creation of text widget. * (create_asm_win): Add PC as argument. We now base disassembly on PC instead of function name, since function names can be ambiguous (usually seen with shared libs). Also, use catch to simplify code where we don't care about failures. * source.c (symtab_to_filename): New. Returns the file associated with a symtab. * top.c: Define interactive_hook. Called during QUIT to animate the GUI. Fri Sep 16 00:14:40 1994 Per Bothner (bothner@kalessin.cygnus.com) * stabsread.c (read_type): Handle stub types for bitstrings. * stabsread.c (read_array_type): Check for stub domain type using TYPE_FLAG_STUB, not its length. * gdbtypes.c (create_set_type): Handle a stub domain type. * ch-exp.y: Get rid of some extra non-terminals, and move their rules into primitive_value. * parser-defs.h: Add comment about unary postfix operators. * ch-lang.c (chill_op_print_tab): Add '->', postfix and prefix. * expprint.c (print_subexp): Recognize unary postfix operator. Wed Sep 14 18:27:42 1994 Jason Molenda (crash@phydeaux.cygnus.com) * remote-hms.c: use remote_debug instead of hms_silent toggle. Add warnings about depreciation of `snoop' cmd. Wed Sep 14 18:18:58 1994 Steve Chamberlain (sac@jonny.cygnus.com) * remote-hms.c (hms_read_inferior_memory): Cope when target sends both \r and \n. Wed Sep 14 17:14:57 1994 Stan Shebs (shebs@andros.cygnus.com) * remote-mips.c (mips_error): Place NORETURN macro correctly. * TODO: Add item about START_INFERIOR_TRAPS_EXPECTED. Wed Sep 14 14:26:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (read_xcoff_symtab): Fix obsolete comment about mst_solib_trampoline. * f-valprint.c (f_val_print): Change cast of valaddr from CORE_ADDR * to char **, since that is how it is used. * dbxread.c (read_dbx_dynamic_symtab): Save copy of symbol names using obsavestring, and pass that to prim_record_minimal_symbol. Having the objfile point to bfd_asymbol_name directly doesn't work if we save and restore a mapped symbol file. Wed Sep 14 00:55:26 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl: Add ref counts to breakpoint tags. * Put quotes around function name in disassemble command to better handle assembler names containing `.'. * Make pclist element 0 be filler to avoid off-by-one problem with line numbers. * Set names of top-level windows. * Add register display window. * Add PC to label of assembly window. Tue Sep 13 18:23:26 1994 Rob Savoye (rob@darkstar.cygnus.com) * w89k-rom.c, op50-rom.c, monitor.c, config/pa/hppapro.mt: New files to add a generic ROM monitor interface, and support file for the WinBond W89K and the Oki OP50N PA based target boards. Tue Sep 13 08:59:04 1994 Stu Grossman (grossman@cygnus.com) * gdbtk.c (gdbtk_flush gdbtk_fputs): Buffer up output to make disassembly more efficient. * (breakpoint_notify): Include pc in gdbtk_tcl_breakpoint callback. * (gdb_loc): Include pc in return value. Also, return function name if arg was specified. * (gdb_cmd_stub): Call gdb_flush to drain internal GDB buffers after command completes. * (gdbtk_init): Improve error handling. * gdbtk.tcl: Add lots of comments. Clean up code. * (gdbtk_tcl_fputs): Make output window redirectable. * Add assembly window, and breapoint support. * Make button 1 in margin toggle breakpoints. * Use stippling to indicate breakpoint disabling. Sun Sep 11 22:34:57 1994 Jeff Law (law@snake.cs.utah.edu) * config/pa/tm-hppa.h (REGISTER_NAMES): Use r26-r23 for arg0-arg3. Sun Sep 11 04:36:47 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * irix5-nat.c, osfsolib.c, solib.c (solib_add): Simplify last change by replacing `symbols_added' with `so_last'. * mdebugread.c (parse_external, parse_partial_symbols): Ignore global common symbols, they will be resolved by the runtime loader. * mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref): Handle scSCommon like scCommon symbols. Sat Sep 10 01:43:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * corelow.c (add_solib_stub): Copy to_sections changes from core_ops to current_target after adding the shared libraries. * partial-stab.h (N_EXCL), dbxread.c (add_old_header_file, find_corresponding_bincl_psymtab): Change `repeated header not seen' error to a complaint, simplify complaint. * procfs.c (signalname, errnoname): Make `name' const. * symfile.c (reread_symbols): Use filename from old BFD to reopen the objfile. * values.c (record_latest_value): Don't record value in the history chain until we are sure there won't be an error. Fri Sep 9 15:52:09 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * nlm/Makefile.in: remove MMALLOC, READLINE, TERMCAP, and other cruft. * config/i386/gdbserve.mt: New file, defs for i386 nlm stub. Thu Sep 8 17:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com) * remote.c (fromhex): Make error more explicit. (read_frame): Don't print bad checksum information unless remote_debugging. Don't use repeat count unless it's > 0. * remote-e7000.c (expect): When echoing, ignore multiple newlines. (e7000_insert_breakpoint, e7000_remove_breakpoint, target_ops): Optionally cope with BC style breakpoints. (e7000_command): After command send directly to the E7000 mark registers as changed. (why_stop, e7000_wait: Understand BC style stop condition. * sh-tdep.c (sh_skip_prologue): Understand more complicated sequences. (frame_find_saved_regs): Likewise. * config/h8500/tm-h8500.h (target_write_pc, TARGET_WRITE_PC): Handle extra arg. * config/i386/xm-go32.h (GDBINIT_FILENAME): Set to gdb.ini. (more work here to come) * config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function fields. Thu Sep 8 16:15:34 1994 J.T. Conklin (jtc@rtl.cygnus.com) * sparclite/Makefile.in: Assorted stuff needed for eload. * sparclite/eload.c: Merge in command line argument parsing and error message handling improvements orignally made to aload.c. Wed Sep 7 23:24:50 1994 Jeff Law (law@snake.cs.utah.edu) * defs.h (enum misc_command_type, command_control_type): Enums for describing the command and control types. (struct command_line): Add new fields to keep track of the command type and body associated with the command. * top.c: Include value.h. Delete whitespace at the end of lines. (build_command_line, get_command_line): New functions. (execute_control_command, while_command, if_command): Likewise. (realloc_body_list, read_next_line): Likewise. (recurse_read_control_structure): Likewise. (execute_user_command): Call execute_control_command. (read_command_lines): Simplify by calling read_next_line, call read_control_structure for "if" and "while" commands. (free_command_lines): Free new fields in the command structure. (define_command): Reset control_level to zero. (init_main): Install command handlers for "if" and "while" commands. Tue Sep 6 16:24:07 1994 Stan Shebs (shebs@andros.cygnus.com) * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): Add cases for Fortran type codes. * eval.c (evaluate_subexp): For OP_ARRAY expressions in Fortran, call f77_value_literal_string instead. * f_exp.y: Include , move include of parser-defs.h. (parse_number): Translate 'd' floats to 'e' so atof() works. (yylex): Remove unused variables. * f-lang.c: Include . (get_bf_for_fcn): Remove unused variable. * f-typeprint.c (f_type_print_varspec_prefix, f_type_print_varspec_suffix): Remove unused variables, add cases to switch statements. (f_type_print_base): Remove unused variables. * f-valprint.c (gdbcore.h, command.h): Include. (f77_get_dynamic_lowerbound, f77_get_dynamic_upperbound): Call read_memory_integer with correct number of arguments. (f77_get_dynamic_upperbound): Call f77_get_dynamic_lowerbound with correct argument type. (f77_print_array): Removed unused array array_size_array. (f_val_print): Don't use a CORE_ADDR as a char *. * valops.c (value_cast): Handle COMPLEX and BOOL types. (value_assign): Handle Fortran literal string and complex values. (f77_cast_into_complex, f77_assign_from_literal_string, f77_assign_from_literal_complex): New functions. Mon Sep 5 14:46:41 1994 Per Bothner (bothner@kalessin.cygnus.com) * ch-typeprint.c (chill_type_print_base): Make TYPE_CODE_RANGE case more robust. Sun Sep 4 16:06:34 1994 Stan Shebs (shebs@andros.cygnus.com) * i960-tdep.c (signal.h): Don't include. * cxux-nat.c (target_is_m88110): Remove definition. * configure.in (config/nm-empty.h): If cross only, use instead of config/nm-trash.h. * config/nm-trash.h: Remove. * config/nm-empty.h: New file. * config/i386/nm-m3.h: New file, includes config/nm-m3.h. * config/mips/nm-m3.h: New file, includes config/nm-m3.h. * config/m68k/nm-sysv4.h: New file, includes config/nm-sysv4.h. * config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h. * config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h. Fri Sep 2 19:11:40 1994 Stu Grossman (grossman@cygnus.com) * configure.in: Don't symlink to gdbtk.tcl if it's already there. Fri Sep 2 17:35:55 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * configure.in: No longer look for nm, tm, and xm headers in config/
; they are always in config//
. Fri Sep 2 16:40:03 1994 Stan Shebs (shebs@andros.cygnus.com) * objfiles.c (allocate_objfile): Add the newly-created objfile to the end of the list of objfiles, instead of at the beginning. * xcoffread.c (allocate_include_entry): New function, abstracted from code in record_include_begin. (record_include_begin, record_include_end): Call it. * blockframe.c (reinit_frame_cache): Test inferior_pid instead of target_has_stack to decide whether to create a real stack frame for the cache. * coffread.c (process_coff_symbol) [CXUX_TARGET]: Ignore vendor section. * config/m88k/tm-cxux.h (CXUX_TARGET): Define. * h8300-tdep.c: Include "dis-asm.h" instead of . Fri Sep 2 09:51:46 1994 J.T. Conklin (jtc@cygnus.com) * config/sparc/tm-nbsd.h: Add #defines to map NetBSD struct and field names into what is expected by sparc-nat.c. Thu Sep 1 17:32:54 1994 Per Bothner (bothner@kalessin.cygnus.com) * c-typeprint.c (c_typedef_print): Add missing Chill support. Thu Sep 1 15:41:21 1994 Stu Grossman (grossman@cygnus.com) * rs6000-pinsn.c (print_insn): Use powerpc disassembler when doing Power PC. * config/powerpc/tm-ppc-nw.h: Define GDB_TARGET_POWERPC. * config/i386/i386lynx.mh, config/m68k/m68klynx.mh, config/rs6000/rs6000lynx.mh, config/sparc/sparclynx.mh: Enable ser-tcp. * nlm/Makefile.in: Get rid of NWSOURCE. * nlm/alpha-io.S (inVti, outVti): Remove extraneous ldha's. * nlm/gdbserve.o: Add dummy __main routine. * nlm/gdbserve.def: Turn on debug. Thu Sep 1 12:36:39 1994 Jim Kingdon (kingdon@cygnus.com) * config/xm-nbsd.h: Don't define SET_STACK_LIMIT_HUGE; it is obsolete. Thu Sep 1 11:01:40 1994 J.T. Conklin (jtc@rtl.cygnus.com) * config/tm-nbsd.h: New file, support for all NetBSD targets. * config/xm-nbsd.h: fix typo. * config/sparc/{nm,tm,xm}-nbsd.h: New files, renamed from {nm,tm,xm}-sparcnbsd.h to conform to prefered file naming conventions. * configure.in: (sparc-*-netbsd): use config/sparc/nbsd.m[ht]. Wed Aug 31 14:40:33 1994 Jason Molenda (crash@phydeaux.cygnus.com) * remote-udi.c (udi_read_inferior_memory,udi_write_inferior_memory): change typeo in error msg (`inferrior' -> `inferior'). Wed Aug 31 09:17:02 1994 Jim Kingdon (kingdon@cygnus.com) * inflow.c (set_sigint_trap, clear_sigint_trap): Check for attach_flag (this check was performed by the callers). Also check inferior_thisrun_terminal. * inftarg.c (child_wait), lynx-nat.c (child_wait), procfs.c (wait_fd), symm-nat.c (child_wait): Don't check attach_flag in deciding whether to call set_sigint_trap and clear_sigint_trap. * value.h (struct value): Change literal_data from PTR to char *, since that is the way it is used. Tue Aug 30 21:56:54 1994 Jeff Law (law@snake.cs.utah.edu) * somread.c (som_symfile_read): Force unwinds to be re-read after reading in a new partial symbol table. Tue Aug 30 13:14:16 1994 Stan Shebs (shebs@andros.cygnus.com) * config/h8500/tm-8500.h (DONT_USE_REMOTE): Remove definition, an obsolete conditional. * config/pa/tm-hppa.h (BREAKPOINT) [KERNELDEBUG]: Remove use, an obsolete conditional. * config/rs6000/rs6000.mh, config/rs6000/rs6000.mt: Clean up comments. Mon Aug 29 14:39:42 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (ns32k-opcode.h): Remove reference. (ns32k-pinsn.o): Update dependencies. * ns32k-opcode.h: Remove file. * ns32k-pinsn.c (print_insn): Call version in libopcodes, remove all other code in this file. Mon Aug 29 12:04:07 1994 Stu Grossman (grossman@cygnus.com) * nlm/configure.in: Stop using cpu.c. Put it in TDEPFILES instead. * config/alpha/gdbserve.mt (TDEPFILES): Remove alpha-patch.o. * nlm/Makefile.in: Add rule for .S.o. * nlm/aio.h: Protect from multiple inclusions. * nlm/alpha-io.S: Remove everything we don't need. * nlm/{alpha-patch.c, alpha-patch.h, alpha-uart.c, alpha-uart.h}: Remove, no longer needed. * nlm/alpha.c: Merge in lots of stuff from previous files. * nlm/alpha.h: Don't #include alpha-patch.h. Make breakpoint_insn extern. * Move stuff from alpha-patch.h into here. * config/alpha/gdbserve.mt (TDEPFILES): Get rid of alpha-uart.o. Mon Aug 29 11:34:34 1994 Jim Kingdon (kingdon@cygnus.com) * annotate.c (annotate_starting): Flush output. Sat Aug 27 23:32:43 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * symfile.c (symbol_file_add): Move reinit_frame_cache call to the callers of symbol_file_add. Gets rid of heuristic fence-post warnings on mips and alpha targets when the PC resides in a shared library which is not yet read in. * coff-solib.c (coff_solib_add), cxux-nat.c (add_shared_symbol_files), irix5-nat.c (solib_add), osfsolib.c (solib_add), remote-vx.c (vx_open), solib.c (solib_add): Add call to reinit_frame_cache after all shared libraries are read in. * remote-udi.c (udi_load), remote-vx.c (vx_load_command), symfile.c (symbol_file_command, add_symbol_file_command): Add call to reinit_frame_cache after symbol_file_add. Wed Aug 24 17:45:14 1994 J.T. Conklin (jtc@cygnus.com) * config/xm-nbsd.h: New file, support for all NetBSD ports. * config/sparc/{nm-sparcnbsd.h,tm-sparcnbsd.h,xm-sparcnbsd.h, sparcnbsd.mh,sparcnbsd.mt}: New files, support for NetBSD/sparc. * configure.in: Add sparc-*-netbsd target. Wed Aug 24 13:17:34 1994 Stan Shebs (shebs@andros.cygnus.com) * remote-vx.c (vx_attach): Interpret the command argument as an unsigned long. Wed Aug 24 13:08:08 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * configure.in: Change i[34]86 to i[345]86. * nlm/configure.in: Likewise. * gdbserver/configure.in: Likewise. Wed Aug 24 09:41:09 1994 J.T. Conklin (jtc@cygnus.com) * configure.in (i386-*-netware): Automatically configure nlm subdir. Tue Aug 23 17:51:13 1994 J.T. Conklin (jtc@cygnus.com) * nlm/gdbserve.c: conditionalize header file inclusion for either NetWare 4.0 or PIN targets. * nlm/i386.c: include appropriate header files. * nlm/prelude.c: define TERMINATE_BY_UNLOAD for NetWare 4.0 targets. Tue Aug 23 16:54:16 1994 Stu Grossman (grossman@cygnus.com) * nlm/ppc.c (set_step_traps clear_step_traps): Cleanups. * nlm/gdbserve.def: Autoload clib. Tue Aug 23 12:05:19 1994 Jim Kingdon (kingdon@cygnus.com) * breakpoint.c (condition_command): Call breakpoints_changed. * gdbtypes.h: Declare f77_create_literal_string_type and f77_create_literal_complex_type. * valops.c (f77_value_literal_string, f77_value_substring, f77_value_literal_complex): Use xmalloc not malloc. * valops.c (f77_value_literal_string, f77_value_substring): Make addr char * not CORE_ADDR. * value.h (struct value): Add new field literal_data of aligner union. (VALUE_LITERAL_DATA): Use it. * f-lang.h: Declare find_common_for_function. * value.h, valops.c: Split VALUE_SUBSTRING_START into memaddr and myaddr fields of a union. Don't overload it with the frame field (not sure this is necessary; I'm not sure what lval_* codes VALUE_SUBSTRING_* can be used with). Mon Aug 22 11:45:01 1994 Stan Shebs (shebs@andros.cygnus.com) * config/a29k/{a29k-kern.mt,a29k-udi.mt,a29k.mt,ultra3.mh, ultra3.mt}: Clean up comments, remove no-longer-used definitions. * rs6000-nat.c: Include libbfd.h again, needed until reference to bfd_cache_lookup is cleaned out. * config/i386/linux.mh (XM_CLIBS): Add -lm. Mon Aug 22 10:42:15 1994 Steve Chamberlain (sac@jonny.cygnus.com) Work to reduce the interrupts-off duration when running in DOS. * ser-go32.c: (dos_async_ready): See if anything is in the buffer. (dos_async_rx): rewrite to unpack as many characters from the asynctsr as possible into a local buffer. Fri Aug 19 14:55:45 1994 Stan Shebs (shebs@andros.cygnus.com) Initial Fortran language support, adapted from work by Farooq Butt (fmbutt@engage.sps.mot.com). * Makefile.in: Add Fortran-related files and dependencies. * defs.h (language_fortran): New language enum. * language.h (_LANG_fortran): Define. (MAX_FORTRAN_DIMS): Define. * expression.h: Reformat to standard. (MULTI_F77_SUBSCRIPT, OP_F77_UNDETERMINED_ARGLIST, OP_F77_LITERAL_COMPLEX, OP_F77_SUBSTR): New expression opcodes. * gdbtypes.h (TYPE_CODE_COMPLEX, TYPE_CODE_LITERAL_COMPLEX, TYPE_CODE_LITERAL_STRING): New type codes. (type): New fields upper_bound_type and lower_bound_type. (TYPE_ARRAY_UPPER_BOUND_TYPE, TYPE_ARRAY_LOWER_BOUND_TYPE, TYPE_ARRAY_UPPER_BOUND_VALUE, TYPE_ARRAY_LOWER_BOUND_VALUE): New macros. (builtin_type_f_character, etc): Declare. * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_START): Define. * f-exp.y: New file, Fortran expression grammar. * f-lang.c: New file, Fortran language support functions. * f-lang.h: New file, Fortran language support declarations. * f-typeprint.c: New file, Fortran type printing. * f-valprint.c: New file, Fortran value printing. * eval.c (evaluate_subexp): Add code for new expression opcodes, fix wording of error message. * gdbtypes.c (f77_create_literal_complex_type, f77_create_literal_string_type): New functions. * language.c (set_language_command): Add Fortran info. (calc_f77_array_dims): New function. * parse.c (length_of_subexp, prefixify_subexp): Add cases for new expression opcodes. * symfile.c (deduce_language_from_filename): Recognize .f and .F as Fortran source files. * valops.c (f77_value_literal_string, f77_value_substring, f77_value_literal_complex): New functions. Fri Aug 19 13:35:01 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * c-typeprint.c (c_print_type): Assume demangled arguments if a '(' is found in varstring, looking for ')' at the end of varstring did fail with demangled const member functions, which have a trailing `const'. * remote.c (get_offsets, putpkt): Change to `char' buffers, to avoid errors when compiling with DEC c89. (remote_wait): Cast to `char *' before passing buffer to fputs_filtered, to avoid errors when compiling with DEC c89. (remote_wait): Do not return inferior_pid by default, this statement is never reached, which causes warnings from some compilers. * stabsread.c (scan_file_globals): Ignore static minimal symbols. * symfile.c (load_command): If called with no argument, try to get the filename from the executable file. (generic_load): Remove check for NULL filename, it is done in load_command now. Fri Aug 19 10:36:15 1994 Jeff Law (law@snake.cs.utah.edu) * Makefile.in (ALLDEPFILES): Add hpread.c. (hpread.o): Add dependencies. * somread.c: Do not include "aout/aout64.h". SOM has nothing to do with a.out. (BYTES_IN_WORD): Delete. (som_symfile_read): Call hpread_build_psymtabs to build any minimal symbols based on the HP C native debug symbols. (som_symfile_finish): Call hpread_symfile_finish. (som_symfile_init): Call hpread_symfile_init. * config/pa/tm-hppa.h (HPREAD_ADJUST_STACK_ADDRESS): Define. * hppa-tdep.c (hpread_adjust_stack_address): New function. * config/pa/hppabsd.mh (NATDEPFILES): Add hpread.o * config/pa/hppahpux.mh (NATDEPFILES): Likewise. * hpread.c: New file. Fri Aug 19 00:40:55 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (skip_trampoline_code): Revert incorrect change from June 2, 1994 (what was I thinking?!?). Fix it right this time. Thu Aug 18 17:01:35 1994 J.T. Conklin (jtc@rtl.cygnus.com) * nlm/i386.c, nlm/i386.h: New files that contain i386 specific code. Thu Aug 18 14:39:46 1994 Stan Shebs (shebs@andros.cygnus.com) * README: Grammar improvements, clarifications, updates. Wed Aug 17 23:08:53 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in (TARGET_FLAGS_TO_PASS): Pass down LD_FOR_TARGET and NLMCONV_FOR_TARGET. (SUBDIRS): Add nlm target. * configure.in (powerpc-*-netware*): Automatically configure nlm subdir. * nlm/Makefile.in: Add {CC NLMCONV LD}_FOR_TARGET. Remove alpha specific stuff. Make things more configurable. * nlm/configure.in: Add powerpc-*-netware* target. Use gdbserve.mt/cpu.c/cpu.h for target stuff. Get rid of tm/xm/nm.h files. * nlm/gdbserve.c: Move Alpha specific stuff into other files. Remove lots of architecture-specific stuff. * nlm/gdbserve.def: Add new imports. * nlm/ppc.c, nlm/ppc.h: New files that contain PowerPC specific code. * nlm/prelude.c: Don't include libhooks.h, get rid of call to register library. * nlm/prelude.o: What was this doing here? * config/alpha/gdbserve.mt: Defs for alpha nlm stub. * config/powerpc/gdbserve.mt: Defs for PowerPC nlm stub. * config/powerpc/ppc-nw.mt: Defs for PowerPC target for GDB. * config/powerpc/tm-ppc-nw.h: Ditto. * nlmstub.def: New file, contains imports for 386 nlm stub. Wed Aug 17 23:17:33 1994 Rob Savoye (rob@darkstar.cygnus.com) * remote-pa.c: New file for HPPA embedded support. Currently it's a copy of remote.c. * config/pa/hppabsd.mt,hppahpux.mt,hppaosf.mt: User remote-pa.c. Wed Aug 17 13:19:52 1994 Stan Shebs (shebs@andros.cygnus.com) * config/m68k/tm-delta68.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Define to use %a0 for pointers. Wed Aug 17 07:43:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * remote-mips.c: Remove unused declaration of mips_load. Tue Aug 16 16:45:34 1994 Stan Shebs (shebs@andros.cygnus.com) * coffread.c: General cleanup, and support for section offsets. (time.h, sys/types.h, libbfd.h): Don't include. (cur_src_start_addr, cur_src_end_addr): Rename to current_source_start_addr, current_source_end_addr. (nlist_stream_global): Remove. (nlist_bfd_global): New global variable. (coff_symfile_read): Remove code that gets and uses fileno() directly. (read_coff_symtab, enter_linenos, process_coff_symbol): Add section_offsets parameter, add text/data section offset to appropriate symbols' values. (read_one_sym): Use bfd_read instead of fread. (init_stringtab, init_lineno): Change first parameter to a bfd, use bfd routines instead of raw I/O. Tue Aug 16 15:24:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * symtab.c (decode_line_1): If funfirstline and we get a non-LOC_BLOCK symbol (e.g. variable or type), then error(). * Makefile.in (TARFILES, NONSRC, SFILES_STAND, SFILES_KGDB): Remove; unused. (TAGFILES_NO_SRCDIR): Remove ALLPARAM. (HFILES_NO_SRCDIR): Remove all files in config sub-directory. (TAGS): Also pass result of find on config sub-directory to etags. (ALLPARAM): Remove; now unused. Sun Aug 14 13:05:26 1994 Fred Fish (fnf@cygnus.com) * Makefile.in (VERSION): Bump to 4.13.1 * NEWS, README: Update to match gdb 4.13 release version. Sat Aug 13 08:22:50 1994 Fred Fish (fnf@cygnus.com) Harris CX/UX support, from Bob Rusk (rrusk@mail.csd.harris.com). * cxux-nat.c: Remove dangling #else block. (m88k_harris_core_register_addr): New function. * environ.c (init_environ): If no environment, do nothing. Fri Aug 12 19:30:53 1994 Jeff Law (law@snake.cs.utah.edu) * hpread.c: Delete rest of TODO list. Do not include "libbfd.h", , , "demangle.h", , "expression.h", "language.h", "gdbtypes.h", "demangleh". Move all global variables into the private symbol table structure and add accessor macros. Update some comments. (hpread_build_psymtabs): Delete dbsubc_addr, we don't need it. (hpread_end_psymtab): New function to end a partial symbol table, all callers changed (no more bogus sharing with dbxread.c). Fri Aug 12 15:52:37 1994 Stu Grossman (grossman@cygnus.com) * remote.c (remote_wait): Return inferior_pid instead of 0 for `W` message. Fri Aug 12 11:47:10 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * sparclite/aload.c (sys_error, error): Use vfprintf for variable argument lists. Thu Aug 11 04:06:42 1994 Doug Evans (dje@canuck.cygnus.com) * defs.h (concat, basename, buildargv, freeargv, strerrno, strsigno, errno_max, signo_max, strtoerrno, strtosigno): Delete. Include "libiberty.h" instead. Wed Aug 10 13:23:47 1994 Rick Sladkey (jrs@world.std.com) * i386v-nat.c (i386_insert_nonaligned_watchpoint): add additional argument specifying raw address to permit proper release of debug registers. (i386_insert_watchpoint, i386_insert_aligned_watchpoint): change all callers. Wed Aug 10 16:13:45 1994 Stu Grossman (grossman@cygnus.com) * defs.h, top.c: Use `extern' in declarations of GUI hooks, and define them in top.c. Add comments to the hooks. Wed Aug 10 15:57:43 1994 Doug Evans (dje@canuck.cygnus.com) * remote-sim.c (gdbsim_ops): Set `to_insert_breakpoint' and `to_remove_breakpoint' fields. Wed Aug 10 15:46:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * infcmd.c (run_command): Remove comment suggesting using target_has_execution instead of inferior_pid. Wed Aug 10 10:33:20 1994 Kung Hsu (kung@mexican.cygnus.com) * remote-mips.c (mips_open): add code to handle baud rate. Tue Aug 9 09:44:42 1994 Stu Grossman (grossman@cygnus.com) * infrun.c (wait_for_inferior): Call target_resume() upon detection of new processes. * procfs.c (create_procinfo): Return pointer to new procinfo structure. * (do_detach): Spacing & formatting cleanup. * (procfs_wait): Move wait_again label to ensure that we really wait again. On exit from fork, release new child from gdbs' clutches. * (procfs_set_sproc_trap): Enable trapping of fork and vfork. Mon Aug 08 15:34:13 1994 Jeff Law (law@snake.cs.utah.edu) * hpread.c (hpread_process_one_debug_symbol): Fix block scoping problem (losing localvars on the close-brace instead of after the close brace). Mon Aug 8 15:09:32 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * i386-nlmstub.c (handle_exception): Wait until the thread has been started before killing the NLM by pointing the PC at _exit(). Sat Aug 6 22:27:30 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/mips/tm-irix5.h (IN_SIGTRAMP): Redefine for Irix 5, Irix 5 has a standard _sigtramp signal handler. * irix5-nat.c (solib_add): Get rid of sigtramp_address handling, it is not needed for a standard _sigtramp signal handler. Add shared library sections to the section table of the target before adding the symbols. * mips-tdep.c (mips_skip_prologue): Do not skip load immediate instructions that do not prepare a stack adjustment. * regex.c (SIGN_EXTEND_CHAR): Update to emacs-19.25 definition, which does the right thing on machines where `char' is unsigned. Fri Aug 5 17:50:59 1994 Stu Grossman (grossman@cygnus.com) * remote.c (remote_open): Move setting of inferior_pid prior to call to remote_start_remote. Also use unique value for pid to avoid confusion with read_register_pid & friends. * (remote_wait): Return inferior_pid instead of 0 in all cases. Fri Aug 5 12:23:02 1994 Stan Shebs (shebs@andros.cygnus.com) * dwarfread.c (bfd.h): Don't include. Fri Aug 5 09:08:34 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * i386-nlmstub.c (handle_exception): Point the PC at _exit() to kill the program being debugged. KillMe(), the undocumented call intended for this purpose, causes the server to hang. Thu Aug 4 16:26:06 1994 Steve Chamberlain (sac@jonny.cygnus.com) * remote.c (read_frame): Calculate run length encoded checksum correctly. * config/sh/stub.c: New file. Thu Aug 4 14:34:12 1994 Stu Grossman (grossman@cygnus.com) * target.c (find_default_run_target): Make sure to_can_run is set before calling it. Thu Aug 4 11:46:27 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * TODO: Remove note about fast watchpoints and remove obsolete Mach stuff. Thu Aug 4 11:08:03 1994 Stan Shebs (shebs@andros.cygnus.com) * config/i386/xm-i386v4.h, config/m68k/xm-m68kv4.h, config/sparc/xm-sun4sol2.h (NORETURN): Don't define. * config/m88k/tm-cxux.h (ARCH_NUM_REGS): Undefine before defining. Thu Aug 4 10:26:36 1994 Stu Grossman (grossman@rtl.cygnus.com) * target.c (add_target): Don't call clean_target on target vectors anymore. * (unpush_target): Test for to_close being set before calling. * (target_xfer_memory, target_info): Check for to_has_memory before playing with memory. * remote.c (remote_open): Set inferior_pid to make kill command happy. * inflow.c (kill_command): Revert change of Aug 2. Use inferior_pid to determine whether to print out "The program is not being run." message. Thu Aug 4 07:55:04 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config/i386/i386m3.mh (NAT_CLIBS): Add -lmachid and -lnetname. * m3-nat.c, config/nm-m3.h: #if 0 REQUEST_QUIT stuff. * m3-nat.c: Pass argument to return_to_top_level. Declare m3_kill_inferior before use. (port_chain_insert): In "can't happen" case, abort rather than setting `mid' to large decimal constant (which gcc warns about). (get_thread_name): Use cast to convert const char * to char *. (add_mach_specific_commands): #if 0 "thread break" command. (m3_trace_him): Call push_target. (mach_really_wait): New argument pid; remove unused variable pid. (intercept_exec_calls): Call target_terminal_init and target_terminal_inferior once the child execs. * infrun.c (proceed): Pass argument to PREPARE_TO_PROCEED. Wed Aug 3 22:41:13 1994 Tom Lord (lord@x1.cygnus.com) * procfs.c (procfs_mourn_inferior): don't dereference the procinfo pointer after it has been freed. Wed Aug 3 12:05:13 1994 Stan Shebs (shebs@andros.cygnus.com) * breakpoint.c (breakpoint_1): Improve pluralization in display of breakpoint hit counts. * language.h (struct language_defn): Remove unused field la_longest_float. (longest_float): Remove, no longer used. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Remove init of la_longest_float field. * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn): Ditto. * ch-lang.c (chill_language_defn): Ditto. * m2-lang.c (m2_language_defn): Ditto. Tue Aug 2 10:58:34 1994 Stan Shebs (shebs@andros.cygnus.com) * defs.h (bfd_read, bfd_seek): Remove declarations. * os9kread.c, rs6000-nat.c (libbfd.h): Don't include. Tue Aug 2 09:50:50 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * inflow.c (kill_command): Fix a bug which prevented target programs to be killed. Mon Aug 1 18:48:47 1994 Stan Shebs (shebs@andros.cygnus.com) * defs.h: Change two-line declarations to one-line form. (NORETURN): Define as "volatile" only for older GCCs. (ATTR_NORETURN): Define for newer GCCs. * procfs.c (proc_init_failed): Add ATTR_NORETURN to declaration. Mon Aug 1 16:43:24 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * breakpoint.c (mention), main.c (fputs_unfiltered): Add comments. * breakpoint.c (delete_breakpoint, enable_breakpoint, disable_breakpoint): Don't call breakpoints_changed; it is now called via the *_breakpoint_hook functions. * annotate.c (_initialize_annotate, breakpoint_changed): New functions. Mon Aug 1 13:38:04 1994 Kung Hsu (kung@mexican.cygnus.com) * stabsread.c (read_type): Fix a bug in enum size calculation. Mon Aug 1 01:36:13 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (compare_unwind_entries): Add "const" to both argument types to shut up GCC. * hppa-tdep.c (saved_pc_after_call): If the saved PC is in a linker stub, then return the address the stub will return to. (frame_saved_pc): Correctly restart the search for the saved pc when a linker stub is encountered. * hppa-tdep.c (inst_saves_gr): Handle 16 and 8 bit instruction register stores emitted by the version 9 HP compilers. (inst_saves_fr): Relax test for a specific base register (%r1); this avoids losing with the version 9 HP compilers. (skip_prologue): Try to skip argument stores emitted by the HP compilers. It's not perfect, but it's better than before. Fri Jul 29 23:20:30 1994 Stu Grossman (grossman@cygnus.com) * findvar.c (write_pc write_pc_pid): Remove casts to long when calling write_register_pid. * (write_register_pid): Add prototype. Fri Jul 29 21:56:23 1994 Steve Chamberlain (sac@jonny.cygnus.com) * remote.c (read_frame): Split readchar/checksum calculation into two parts since evaluation order is undefined. Fri Jul 29 13:46:08 1994 Fred Fish (fnf@cygnus.com) From Kevin A. Buettner (kev@cujo.geg.mot.com). * Makefile.in (coredep.o): Add inferior.h as dependency. * inflow.c: Add F_SETOWN to list of defines to check around code that uses F_SETOWN. Fri Jul 29 09:59:05 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): If using newlib, set the -L and -B directory prefixes so we can link with it. Thu Jul 28 14:37:36 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in (INSTALLED_LIBS, CLIBS, DEPFILES): Add support for --enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES} where appropriate. * General hackery to support alternate user-interface. * breakpoint.c (mention, delete_breakpoint, enable_breakpoint, disable_breakpoint): Call hooks for alternate user-interface. * defs.h: Add declarations for alternate user-interface hooks. * main.c (main): Add --nw (and --nowindows) options to disable the GUI. * (near call to command_loop): Call command_loop_hook if set. * (fputs_unfiltered): Call fputs_unfiltered_hook if set. * stack.c: Call print_frame_info_listing_hook if set. * top.c (gdb_init): Initialize targets.c and utils.c prior to other files to make sure that calls to error and warning will work. Call init_ui_hook after everything else. * utils.c (query): Call query_hook if set. * (gdb_flush): Call flush_hook if set. * Change _initialize_utils to initialize_utils cuz we don't use automatic initialization of utils.c anymore. * Support for TK GUI. * Makefile.in: Add rule for gdbtk.o. * configure.in: Add support for --enable-gdbtk. * gdbtk.c: New file. Contains support routines for TK interface. * gdbtk.tcl: New file. Implements GUI policy. * remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer necessary. Thu Jul 28 14:52:01 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is there and we are using the gcc from the tree. (LD_FOR_TARGET): Look for ld in ../ld/ld.new. Thu Jul 28 10:43:36 1994 Fred Fish (fnf@cygnus.com) * Makefile.in (annotate.o): Add dependencies. Wed Jul 27 14:34:42 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * sparclite/aload.c: Added new -q (quiet) option. return 0 exit status if file was successfully downloaded. * nlm/gdbserve.c: merge in command line argument parsing changes and bug fixes made to i386-nlmstub.c. * i386-nlmstub.c: The returnLength field must be initialized before portConfig is passed to AIOGetPortConfiguration. Compare command line arguments with strnicmp(); args are case insensitive on netware. Wed Jul 27 09:24:19 1994 Fred Fish (fnf@cygnus.com) * Makefile.in (DISTSTUFF): Add definition. (diststuff): Add for new distribution support. (gdb.tar.Z, make-proto-gdb.dir, setup-to-dist, gdb-$(VERSION).tar.Z, make-proto-gdb-1, make-proto-testsuite.dir): Remove old distribution building rules, now uses standard distribution support in parent directory Makefile.in. Tue Jul 26 14:15:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * target.c (push_target): Cast result from xmalloc. Tue Jul 26 18:20:46 1994 Paul Flinders (ptf@smee) * elfread.c (elf_symtab_read): Discard compiler labels generated by the Solaris 2.1/Intel SunPro compiler. Mon Jul 25 18:19:24 1994 Stu Grossman (grossman@cygnus.com) * target.c (nomemory): Fix prototype and routine to take correct args. Mon Jul 25 15:38:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (clean): Remove libgdb-files. Mon Jul 25 11:50:57 1994 Stan Shebs (shebs@andros.cygnus.com) * coredep.c: Include inferior.h. Mon Jul 25 11:36:02 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * i386-nlmstub.c: Add support for NODE, PORT and BAUD command line arguments. Sat Jul 23 14:36:09 1994 Stan Shebs (shebs@andros.cygnus.com) * symfile.c (deduce_language_from_filename): Recognize .S as asm, .cp as C++, alphabetize better. * breakpoint.c (ignore, condition): Move usage note into body of help text, so first line can be one-line summary. Sat Jul 23 00:58:15 1994 Stu Grossman (grossman@cygnus.com) * target.c (unpush_target): Fix handling of removal of top target. Fri Jul 22 17:30:39 1994 Stu Grossman (grossman@cygnus.com) * Makefile.in: Add stuff to build nlmstub. * Add rule for annotate.o to keep Sun make happy. * configure.in: Add config for powerpc/Netware. * partial-stab.h (near N_SO): Don't call START_PSYMTAB with null filename. This speeds up handling of trailing N_SO stabs (they mark the end of a .o file). * target.c, target.h: Change the way pushing and popping of targets work to support target overlays and inheritance. * corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c: Fixup references to current_target, due to previous changes. * config/i386/tm-i386nw.h: Enable longjmp support. More work is needed to get the address of longjmp out of the target. Tue Jul 19 13:25:06 1994 Stan Shebs (shebs@andros.cygnus.com) * main.c: Include . Mon Jul 18 15:32:17 1994 Kung Hsu (kung@mexican.cygnus.com) * remote-mips.c (mips_readchar): Fix a bug in checking prompt. Mon Jul 18 14:26:35 1994 Stan Shebs (shebs@andros.cygnus.com) * solib.c (look_for_base): Don't deref exec_bfd if NULL. Sun Jul 17 15:38:36 1994 Fred Fish (fnf@cygnus.com) * Makefile.in (VERSION): Bump to 4.12.4. Sun Jul 17 12:20:35 1994 Stan Shebs (shebs@andros.cygnus.com) Harris CX/UX support, from Bob Rusk (rrusk@mail.csd.harris.com). * configure.in (m88*-harris-cxux*): New configuration. * cxux-nat.c, config/m88k/cxux.mh, config/m88k/cxux.mt, config/m88k/xm-cxux.h, config/m88k/tm-cxux.h, config/m88k/nm-cxux.h: New files. * config/m88k/tm-m88k.h: Add comment about Harris OS. (TARGET_WRITE_PC): Pass pid through to register writers. * configure.in (m68*): Put vendor-only-specified host configs after vendor-and-os-specified configs. (m68*-atari-sysv4*, m68*-cbm-sysv4*): Replace with m68*-*-sysv4. * config/m88k/delta88.mh (MUNCH_DEFINE): Remove. * config/m88k/delta88.mt, config/m88k/delta88v4.mh: Format consistently. Sat Jul 16 23:39:17 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * elfread.c (elf_symtab_read): Handle error return from bfd_get_dynamic_symtab_upper_bound gracefully. Sat Jul 16 14:43:17 1994 Stan Shebs (shebs@andros.cygnus.com) * inferior.h (ARCH_NUM_REGS): New macro, actual number of registers in use by the inferior. * coredep.c (fetch_core_registers, register_addr): Use it. * findvar.c (registers_changed, registers_fetched, read_register_bytes): Ditto. * infcmd.c (do_registers_info, registers_info): Ditto. * infptrace.c (fetch_inferior_registers, store_inferior_registers): Ditto. * stack.c (frame_info): Ditto. * coredep.c (CORE_REGISTER_ADDR): New macro. (fetch_core_registers): Use it. * breakpoint.c (ignore, condition): Add usage notes to help strings. * symfile.c (add-symbol-file): Add usage note to help string. (add_shared_symbol_files_command): New command. gcc -Wall lint. * inferior.h (read_pc_pid): Declare. * breakpoint.c (watchpoint_check): Cache breakpoint in local variable b, remove unused variable other_type_used. * main.c (inferior.h, call-cmds.h): Include. (gdb_init): Declare. * remote.c (remote_wait): Return 0 by default. Fri Jul 15 16:43:33 1994 Stan Shebs (shebs@andros.cygnus.com) Stop printing at null char option, from Oliver Meyer (omeyer@i3.informatik.rwth-aachen.de). * valprint.h, valprint.c (stop_print_at_null): New global. * valprint.c (_initialize_valprint): New print set subcommand "null-stop". * c-valprint.c (c_val_print): If stop_print_at_null is on, and printing a char array, adjust the number of chars to print. Fri Jul 15 14:33:40 1994 Stan Shebs (shebs@andros.cygnus.com) From Kevin A. Buettner (kev@cujo.geg.mot.com). * m88k-tdep.c (examine_prologue): Modified to handle prologues for pic code in addition to prologues where an instruction from the prologue gets moved into the delay slot of a branch instruction immediately following the prologue. A table of potential prologue instructions (prologue_insn_tbl) is now used for picking apart a function prologue. (frame_find_saved_regs): Changed the way in which limit gets set so that the delay slot of branch instructions immediately following the prologue gets examined. (pushed_size, store_parm_word, store_parm, push_parameters, collect_returned_value): Deleted. Fri Jul 15 01:06:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * infrun.c (wait_for_inferior): Handle stepping into leaf functions whose prologue consists of gp loading code only. Thu Jul 14 14:22:12 1994 Stan Shebs (shebs@andros.cygnus.com) * dbxread.c: Don't include libbfd.h. * dwarfread.c, elfread.c somread.c: Don't include libbfd.h, , or . * elfread.c (elf_symfile_read): Use only standard BFD functions to collect information about the stab and stab string sections. Thu Jul 14 13:17:39 1994 Kung Hsu (kung@x1.cygnus.com) * stabsread.c (read_huge_number): handle large unsigned number for stabs generated by os9k C compiler. Wed Jul 13 18:58:15 1994 Stan Shebs (shebs@andros.cygnus.com) Breakpoint hit counts, from Bob Rusk (rrusk@mail.csd.harris.com). * breakpoint.h (hit_count): New breakpoint field. * breakpoint.c (show_breakpoint_hit_counts): New variable. (clear_breakpoint_hit_counts): New function. (bpstat_stop_status): Increment the hit count. (breakpoint_1): Display the hit count. * infcmd.c (run_command): Reset breakpoint hit counts. * target.c (generic_mourn_inferior): Don't clear ignore counts if displaying hit counts. Tue Jul 12 12:23:15 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * elfread.c (elf_symfile_read): Unconditionally add dynamic symbols for all symbol files. Makes skipping over the trampoline code work when stepping from a function in a shared library into a function in a different shared library for Irix 5. Other ELF targets do not have enough information in their dynamic symbol tables to make this work. (elf_symtab_read): Relocate mst_solib_trampoline address. Mon Jul 11 16:38:49 1994 Stan Shebs (shebs@andros.cygnus.com) Atari support, from Uwe Seimet (seimet@chemie.uni-kl.de). * configure.in (m68*-atari-sysv4*): New configuration. (m68*-cbm-sysv4*): Use m68kv4 instead of amix. * m68k-tdep.c (R_PS): Define as R_SR if necessary. * config/m68k/m68kv4.mh, config/m68k/m68kv4.mt, config/m68k/tm-m68kv4.h, config/m68k/xm-m68kv4.h: New files. * config/m68k/amix.mh, config/m68k/amix.mt, config/m68k/tm-amix.h, config/m68k/xm-amix.h: Removed, superseded by m68kv4 files. Sat Jul 9 16:28:43 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * symtab.c (find_function_start_sal): New function to find the start of a function from a function symbol. (decode_line_1, decode_line_2): Use it instead of open coded partial copies of the code. (list_symbols): Quote symbol name before passing it to break_command to enable proper handling of mangled symbols. Wed Jul 6 20:22:07 1994 Per Bothner (bothner@kalessin.cygnus.com) * ch-exp.y (match_simple_name_string): Don't lower-case here. * ch-exp.y (yylex): First try name lookup using exact name typed by user; if that fails, try lower-cased name. Wed Jul 06 12:39:07 1994 Jeff Law (law@snake.cs.utah.edu) * hpread.c: More cleanups. Delete lots of trailing whitespace. Remove some items from the TODO list and notes throughout code for things which need fixing. Add more comments. Document bogus struct symloc sharing with dbxread.c. Delete more useless variables. Add more PARAM prototypes. Fixup more indention problems that have crept in. (SET_NAMESTRING): Accept new namep and objfile arguments so that it doesn't depend on the variable names on the procedures it's used from. (hpread_symfile_init): Delete incorrect checks for bogus sizes of the debug sections. Wed Jul 6 00:48:57 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dbxread.c, elfread.c, mipsread.c, nlmread.c, os9kread.c: Move "no debugging symbols found" test to symfile.c. * symfile.c (syms_from_objfile, reread_symbols): Add "no debugging symbols found" test. * coffread.c (init_stringtab): Handle stripped files with a stringtab offset of zero gracefully. * osfsolib.c (solib_create_inferior_hook): Use DYNAMIC flag from BFD instead of stop_pc heuristic to determine if it is a dynamically linked object file. * procfs.c (wait_fd): Handle ENOENT error return from PIOCWSTOP ioctl, it indicates that the process has exited. Mon Jul 04 19:48:03 1994 Jeff Law (law@snake.cs.utah.edu) * hpread.c (hpread_symfile_init): Make sure to initialize all the private data to zero. Not having any HP C debug symbols is not an error. Just return. Mon Jul 4 19:28:56 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (read_unwind_info): ELF unwind information is in the .PARISC.unwind section now. Mon Jul 4 17:06:26 1994 Stan Shebs (shebs@andros.cygnus.com) * breakpoint.c (mention): Always show breakpoint address if no source file. Sat Jul 2 01:51:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * solib.c (bfd_lookup_symbol, look_for_base): Reinstate to reenable handling of shared libraries for non-ELF executables, but only if HANDLE_SVR4_EXEC_EMULATORS is defined. (locate_base): Try to find debug_base in the dynamic linker for non-ELF executables if HANDLE_SVR4_EXEC_EMULATORS is defined. * config/sparc/tm-sun4sol2.h (HANDLE_SVR4_EXEC_EMULATORS): Define to enable handling of shared libraries for a.out executables, run under Solaris BCP. Fri Jul 01 19:50:21 1994 Jeff Law (law@snake.cs.utah.edu) * hpread.c: Change contribution notice to the Cygnus/Utah agreed upon notice. Delete some stuff from the TODO list. Rework many comments to be clearer. Major cleanups. Consistently use "hpread_" prefix. Delete unnecessary macros, structures variables, fiels, functions and #if 0 code. Mark code which still needs to be cleaned up. PARAMize and make most functions static. Fix error checking when reading in the debug section contents. No more minimal symbol table handling in this code! Thu Jun 30 13:59:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * infrun.c (wait_for_inferior): Print "Program exited normally" regardless of batch_mode. * defs.h, top.c (batch_mode): Removed. Wed Jun 29 18:53:36 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (dcache_h): Remove redundant definition. (init.c): Add a comment. (top.c): Remove explicit compile action. * breakpoint.c (mention): Share code indicating location of break/watchpoints, don't print address if addressprint is off. * breakpoint.c, c-typeprint.c, c-valprint.c, energize.c, symtab.h (demangle): Remove redundant declarations. * eval.c: Remove redundant function declarations. * objfiles.h: Cosmetic and grammatical improvements. * TODO: Various updates. * remote-mips.c: Replace all \r chars with \015. (mips_receive_header): Display control characters readably. (mips_xfer_memory): Add a simple progress display. Wed Jun 29 13:11:45 1994 Steve Chamberlain (sac@cirdan.cygnus.com) * remote-e7000.c (e7000_open): Don't try a tcp open if we're using go32. * remote-hms.c (flush): New function. (expect): Get edge case right. (hms_read_inferior_memory): Be more tolerant of line noise. Tue Jun 28 14:17:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * configure.in: Use i386m3.mh and i386m3.mt as names of host and target files, not non-existent mach3.mh and mach3.mt. Wed Jun 29 00:26:17 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dbxread.c (dbx_symfile_read): Unconditionally add dynamic symbols for all symbol files. Makes skipping over the trampoline code work when stepping from a function in a shared library into a function in a different shared library. (read_dbx_dynamic_symtab): Relocate mst_solib_trampoline address. Tue Jun 28 15:28:01 1994 Stu Grossman (grossman@cygnus.com) * dbxread.c, partial-stab.h (near N_SO): SO stabs with blank names mean end of .o file. * infrun.c (wait_for_inferior): Clean up multi-thread logic near top of routine. Handle new thread notification cleanly. * lynx-nat.c (child_wait): General cleanups, handle new LynxOS thread notification scheme. * (child_resume): General cleanups, handle resumption of all threads properly. Mon Jun 27 09:57:23 1994 Steve Chamberlain (sac@cirdan.cygnus.com) * ser-go32.c: Rewrite to run under windows. * ser-e7kpc.c: New file to support the E7000 with the PC ISA bus interface. * serial.c (serial_open): Notice device "pc". * remote-e7000.c: Fix copyright date. (expect): Compare \n and \r the same. (e7000_open): Allow pc as a serial port * sh/sh.mt: Add ser-e7kpc. * h8300/h8300hms.mt: Add ser-e7kpc. * main.c (proc_wait): Don't wait if using go32. Mon Jun 27 00:35:51 1994 Jeff Law (law@snake.cs.utah.edu) * somread.c: Simplify by using stabsect_build_psymtabs. * dbxread.c (stabsect_build_psymtabs): New argument "text_name" corresponding to the name of the text section. All references changed. (somstab_build_psymtabs): Delete function, no longer needed. Sun Jun 26 23:54:08 1994 Jeff Law (law@snake.cs.utah.edu) * somread.c: Renamed from paread.c. Changed function names and comments to reflect that this file deals with SOM (an object file format), rather than the PA (a cpu). (Makefile.in): Chaned appropriately. (config/pa/hppabsd.mh, config/pa/hppahpux.mh): Likewise. * dbxread.c (somstab_build_psymtabs): Renamed from pastab_build_psymtabs. Fri Jun 24 08:15:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * core-sol2.c: New file to handle ELF and BCP core file flavours. * config/sparc/sun4sol2.mh (NATDEPFILES): Use it instead of core-svr4. * Makefile.in: Updated for core-sol2.c. * README: Add notes about SPARCworks cc under Solaris 2.x, from Casper H.S. Dik (casper@fwi.uva.nl). * config/mips/xm-makeva.h: Removed, no longer necessary. * Makefile.in, config/mips/xm-irix3.h, config/mips/xm-irix5.h, config/mips/xm-mips.h, config/mips/xm-news-mips.h, config/mips/xm-riscos.h: Remove references to xm-makeva.h Wed Jun 22 17:48:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdba.el: Put program input and output in a separate buffer. Wed Jun 22 16:54:15 1994 Fred Fish (fnf@cygnus.com) * energize-patches, main.c (main), top.c (gdb_init, pwd_command), top.h: Change all occurances of dirbuf to gdb_dirbuf. Collides with global variable of same name in libnsl.so on UnixWare. Wed Jun 22 14:40:52 1994 Kung Hsu (kung@mexican.cygnus.com) * symtab.c (decode_line_1): fix a bug in dealing with '<>' embedded in template name. Tue Jun 21 14:06:46 1994 Kung Hsu (kung@mexican.cygnus.com) * config/i386/nm-linux.h: change calling convention of TARGET_CAN_USE_HARDWARE_WATCHPOINT() and target_insert_watchpoint() and target_remove_watchpoint(). * config/mips/tm-mips64.h: define FORCE_LONG_LONG to force LONGEST to be long long in gdb. * config/mips/tm-bigmips.h: ditto. Mon Jun 20 23:54:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * c-lang.c (asm_language_defn): New definitions for language_asm, mostly copied from c_language_defn, to avoid warnings when switching between c and asm stack frames. Mon Jun 20 13:51:55 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * mdebugread.c (parse_symbol): Don't call ecoff_swap_tir_in or ecoff_swap_rndx_in directly; use the debug_swap pointer instead. (upgrade_type, handle_psymbol_enumerators): Likewise. (has_opaque_xref, cross_ref): Likewise. (elfmdebug_build_psymtabs): Call swap->read_debug_info to read debugging information, rather than doing it here. * mipsread.c (mipscoff_symfile_read): Call read_debug_info entry point in ecoff_debug_swap backend structure, rather than calling ecoff_slurp_symbolic_info directly. Fri Jun 17 20:58:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * breakpoint.c: Include annotate.h. Call annotate_field rather than printing annotation directly. * main.c: Include string.h. Thu Jun 16 14:41:37 1994 Stan Shebs (shebs@andros.cygnus.com) * fork-child.c (startup_inferior) [STARTUP_INFERIOR]: If defined, call it instead of doing normal loop. * infcmd.c (attach_command): Don't call wait_for_inferior if running Mach 3. * infrun.c (proceed) [PREPARE_TO_PROCEED]: If defined, call hook that can decide whether to step over the next breakpoint. * utils.c (wrap_here): Abort if wrap_buffer not allocated. (request_quit) [REQUEST_QUIT]: If defined, call it instead of doing normal quit. * configure.in: Improve sorting/formatting of hosts and targets. (i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*, m88*-*-mach3*, ns32k-*-mach3*): Recognize. * Makefile.in (stop-gdb): New target. * stop-gdb.c: New file, utility to get attention of waiting GDBs in Mach 3. Wed Jun 15 00:41:03 1994 Tom Lord (lord@rtl.cygnus.com) * top.c (gdb_init): Init current_directory in gdb_init. Probably the identical initialization can be deleted from main.c, but i haven't done so just in case. Tue Jun 14 17:24:41 1994 Tom Lord (lord@x1.cygnus.com) * gdba.el: Added menu windows and slightly improved window handling to gdba.el. Fixed numerous minor bugs that were causing emacs and gdb to fall out of sync. Tue Jun 14 16:18:44 1994 Kung Hsu (kung@mexican.cygnus.com) * breakpoint.c: annotate changes lost at merge, put back in. Mon Jun 13 17:28:50 1994 Stan Shebs (shebs@andros.cygnus.com) * config/i386/i386sco.mh, i386sco4.mh (XDEPFILES): Remove i387-tdep.o. Sun Jun 12 03:51:52 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/m68k/dpx2.mh (NATDEPFILES): Remove duplicate inclusion of inftarg.o. * config/m68k/tm-dpx2.h (CANNOT_STORE_REGISTER): Define to inhibit writing of floating registers, the dpx2 kernel disallows it. * irix5-nat.c (LM_ADDR): The loaded address of the shared library is contained in o_praw. * irix5-nat.c (solib_map_sections): Adjust sections by the difference between the loaded address and the prelinked address. * irix5-nat.c (solib_address): Use LM_ADDR for the loaded start address. * mdebugread.c (parse_symbol): Do not relocate stEnd/scText symbols, their value is absolute. * mdebugread.c (parse_partial_symbols): Handle Irix 5.2 shared libraries fh->adr fields of zero. Relocate minimal symbol values upon readin. Relocate non-stabs symbols upon readin. * mdebugread.c (psymtab_to_symtab_1): Use pst->textlow for the start address of the outermost block. * mdebugread.c (parse_lines, parse_procedure): Pass in pst instead of section_offsets and use relocated pst->textlow for line number and procedure address relocations. From gmo@MicroUnity.com (Guillermo A. Loyola): * mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref): Handle SGI Irix5 stIndirect symbol type. Fri Jun 10 14:52:56 1994 Kung Hsu (kung@mexican.cygnus.com) * breakpoint.c: fix a syntax error native cc does not like. * Makefile.in: change sparclite-tdep.c to sparcl-tdep.c. * sparclite/Makefile.in: ditto. * sparcl-tdpe.c: change file name because first 8 chars has to be unique. * sparcl-stub.c: ditto. * sparclite/Makefile.in: fix INCLUDE_CFLAGS to have {srcdir}/../config. Fri Jun 10 10:38:15 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (target_read_pc, target_write_pc): Accept (and ignore) a PID argument. (hppa_pop_frame): Pass a PID to target_write_pc. * config/pa/tm-hppa.h (TARGET_READ_PC, TARGET_WRITE_PC): Accept and pass through a PID argument. (target_read_pc, target_write_pc): Update prototypes. Thu Jun 9 18:10:44 1994 Kung Hsu (kung@mexican.cygnus.com) * Makefile.in: add new file sparclite-tdep.c. * sparclite/Makefile.in: add new file sparclite-stub.c. * sparclite/hw_breakpoint.note: note for SPARClite hardware breapoint support. * config/sparc/sparclite.mt: add sparclite-tdep.o. * config/sparc/tm-sparclite.h: add hardware breakpoints support defiines and code. * sparclite-tdep.c: new file, contains hardware breakpoint support code. * sparclite-stub.c: new file, stub code that add support hardware breakpoint support. * breakpoint.c: add hardware breakpoint support. * breakpoint.h: add new breakpoint type to support hardware breakpoint. * config/mips/nm-irix4.h: change interface for target dependent code supporting watch point. * config/pa/nm-hppab.h: change interface for target dependent code supporting watch point. Thu Jun 9 14:59:58 1994 Kung Hsu (kung@mexican.cygnus.com) * remote-os9k.c (rombuf_command): fix a bug accepting rombug output. * stabsread.c (read_struct_fields): os9k nested structure does not have terminating ';', instead it just get to ',' and bit position and length. Wed Jun 8 23:20:45 1994 Stu Grossman (grossman@cygnus.com) * nlmread.c (nlm_symtab_read): Clean up a bit. * (nlm_symfile_read): Record bounds of main() so that backtrace command will know where to stop. * objfiles.c (objfile_relocate): Relocate entry point/func info for backtrace as well. * objfiles.h: Define values for invalid PCs for entry point info. * symfile.c (init_entry_point_info): Initialize invalid values with aforementioned macros. * config/alpha/tm-alphanw.h: Turn on FRAME_CHAIN_VALID_ALTERNATE to cause backtrace to stop when it gets back to main(). * config/i386/tm-i386nw.h: Ditto. Sat Jun 4 18:17:03 1994 Per Bothner (bothner@kalessin.cygnus.com) Fix value_print, which used to be ostensibly language-independent, but would print pointers and arrays in C syntax. Instead, call a language-specific function. * language.h (struct language_defn): New functional field la_value_print. (LA_VALUE_PRINT): New macro. * language.c (unk_lang_value_print): New stub/dummy function. (unknown_language_defn, auto_language_defn, local_language_defn): Use it. * c-valprint.c (c_value_print): New function, with code moved from: * valprint.c (value_print): ... here. Now just invoke LA_VALUE_PRINT to do language-specific stuff. * valprint.c (value_print_array_elements): Make non-static. * c-lang.c (c_language_defn, cplus_language_defn): Add c_value_print in the la_value_print field. * m2-lang.c (m2_language_defn): Likewise. * ch-lang.c (chill_language_defn): But here use chill_value_print. * ch-valprint.c (chill_val_print): Print null pointer as NULL. * ch-valprint.c (chill_value_print): New function, based on c_value_print, but use Chill "look and feel." * c-lang.h (c_value_print): New prototype. * ch-lang.h (chill_value_print): New prototype. * value.h (value_print_array_elements): New prototype. * ch-valprint.c (chill_val_print, case TYPE_CODE_BITSTRING and case TYPE_CODE_SET): Check that the element type isn't a stub. Fri Jun 3 09:15:00 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * main.c: Move entire file except for #ifndef MAIN_OVERRIDE code to new file top.c. Make things extern instead of static and similar rearrangements to deal with this. * top.h: New file. * utils.c: Move fputs_unfiltered to main.c. Remove FPUTS_UNFILTERED_OVERRIDE ifndef. * Makefile.in: Change so that gdb uses main.c, utils.c, and top.c, and libgdb uses utils.c and top.c. Thu Jun 2 23:19:10 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (skip_trampoline_code): Fix typo. Thu Jun 2 18:09:59 1994 Per Bothner (bothner@kalessin.cygnus.com) * ch-valprint.c (chill_val_print_array_elements): New function. A Chill version of val_print_array_elements, it prints the array index labels, in additions ot the array element values. (chill_val_print): Use the new function. Thu Jun 2 08:50:00 1994 Stu Grossman (grossman@cygnus.com) * configure.in: Add nlm subdir to configdirs for alpha-*-netware target. * defs.h (enum language): Add language_asm. * findvar.c (read_register_bytes read_register_gen write_register_bytes read_register read_register_pid write_register write_register_pid supply_register): Move multi- thread handling down into these routines. Create XXX_pid routines that allow register references to specify the pid. * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid read_sp write_sp read_fp write_fp): Move these routines from infcmd to findvar to centralize the whole mess. * i386-nlmstub.c: Portability fixes. * infptrace.c (child_resume): Conditionalize to allow other natives to override it. Remove PIDGET gubbish, it's no longer necessary. * infrun.c (wait_for_inferior): Put registers_changed() before target_wait() to speed up remote debugging. * Replace code that reads registers from other threads with much nicer looking new function calls (see changes to findvar.c). * Don't skip prologues if debugging assembly source. * lynx-nat.c (child_resume): Lynx now needs it's own version of child_resume to handle multi-thread debugging properly. * remote.c: Add O response to get console output from target. * (readchar): Add timeout parameter. Handle SERIAL_EOF and SERIAL_ERROR here to simplify callers. * Change static var timeout to remote_timeout. * (fromhex): Remove unnecessary return -1 at end of routine. * (remote_wait): Turn this into a big switch statement. Add support for O response. * (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR. * (getpkt): Split getpkt into two parts. read_frame deals with all formatting issues, run-length encoding, and framing. getpkt now handles error recovery, and frame detection. * ser-tcp.c (tcp_readchar): Handle EINTR from read(). * ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem control. (hardwire_readchar): Handle EINTR from read(). * symfile.c (deduce_language_from_filename): Add support for .s files. * config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can override infptrace's child_wait. * config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h instead of XXXlynx.h. * config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of tm-rs6000lynx.h. * nlm/gdbserve.c: Portability fixes. Tue May 31 20:35:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * inftarg.c (child_wait): Call proc_wait, not wait. (child_mourn_inferior): Call proc_remove_foreign. * main.c (gdb_init): Call init_proc. * main.c: Provide dummy versions of init_proc, proc_wait, and proc_remove_foreign for the gdb case (the libgdb case provides its own versions of these functions). * Makefile.in (libgdb-files): Add libproc.a. Wed Jun 1 11:08:52 1994 Stan Shebs (shebs@andros.cygnus.com) Hardware watchpoints for Linux, from Rick Sladkey (jrs@world.std.com). * infrun.c (wait_for_inferior) [HAVE_CONTINUABLE_WATCHPOINT]: Add new hardware breakpoint recovery method. * i386v-nat.c (i386_insert_watchpoint, i386_insert_nonaligned_watchpoint, i386_remove_watchpoint, i386_stopped_by_watchpoint) [TARGET_CAN_USE_HARWARE_WATCHPOINT]: New functions to support the 386 hardware debugging registers. * config/i386/nm-linux.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT, target_insert_watchpoint, target_remove_watchpoint): Define these macros to use the hardware debugging functions in i386v-nat.c. Wed May 25 17:06:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in: Replace libgdb.a with libgdb-files. Make "all" build it. Thu May 19 09:56:20 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * target.c, target.h: New variables target_activity_function and target_activity_fd. * inflow.c, inferior.h: New functions set_sigio_trap and clear_sigio_trap. * inftarg.c (child_wait), procfs.c (wait_fd): Call them. Wed May 18 13:01:55 1994 Doug Evans (dje@canuck.cygnus.com) * remote-sim.h (sim_verbose): Delete. Document callbacks needed. (sim_*): Change result to void where there isn't one. (sim_open): Clarify argument and error response. (sim_close): Declare. (sim_load): Change bfd_handle argument to file name. Clarify result. (sim_create_inferior): Renamed from sim_set_args. (sim_set_pc): Delete. (sim_info): Delete printf_fn argument. * remote-sim.c (gdbsim_kill): Add comment describing purpose. (gdbsim_load): Try sim_load first. (gdbsim_create_inferior): Call sim_create_inferior. (gdbsim_open): Handle args == NULL. Update call to sim_open. (gdbsim_close): Call sim_close. (gdbsim_files_info): Update call to sim_info. (gdbsim_ops): Realign comments. * printcmd.c (decode_format): Allow TARGET_PTR_BIT to be non-constant. Tue May 17 16:45:20 1994 Stan Shebs (shebs@andros.cygnus.com) * xcoffread.c (read_xcoff_symtab): For C_FILE symbols, only use the auxent if the symbol's name is ".file". From David Edelsohn . Tue May 17 11:08:22 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * breakpoint.c (breakpoint_1): Fix typo. * annotate.c (annotate_field_end): Fix typo. * Makefile.in: Move annotate.o from COMMON_OBS to OBS. * Makefile.in (TSSTART): Remove; no longer used. * utils.c (vfprintf_maybe_filtered, vfprintf_unfiltered): Call fputs_unfiltered and exit directly, rather than fatal. The latter calls vfprintf_unfiltered! * gdbtypes.h, gdbtypes.c (can_dereference): New function. * value.h, printcmd.c (print_value_flags): Move from here... * annotate.c: ...to here, and make it use can_dereference. Sat May 14 15:13:52 1994 Stan Shebs (shebs@andros.cygnus.com) * inflow.c (job_control, attach_flag, generic_mourn_inferior): Remove, needed for both native and cross. * target.c (attach_flag, generic_mourn_inferior): Put here. * utils.c (job_control): Put here. (terminal.h): Don't include anymore. Sat May 14 09:11:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * source.c (find_source_lines): Always use code that was #ifdef BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than leaving it on the chain. Reindent much of this function. * config/sparc/{xm-sun4sol2.h,xm-sun4os4.h}, config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h}, config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h}, config/ns32k/xm-ns32km3.h: Remove all references to BROKEN_LARGE_ALLOCA; with the above change it is no longer needed. * main.c, fork-child.c, many config files: Remove all SET_STACK_LIMIT_HUGE code; with the above changes it should no longer be needed. * symtab.c (lookup_partial_symbol): Use if and abort, not assert. This avoids __eprintf troubles. Fri May 13 08:10:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move initialization code which needs to be called even if we bypass the command line stuff into gdb_init. * utils.c (fputs_unfiltered): Surround in #ifndef FPUTS_UNFILTERED_OVERRIDE. * Makefile.in (libgdb.a): New target. * utils.c: Rearrange I/O stuff a bit so that all output goes through fputs_unfiltered. Use vasprintf; removes arbitrary limit which made %s not work with arbitrarily large strings. * printcmd.c (printf_command): Use printf_filtered, not printf_unfiltered and printf, now that arbitrary limit is gone. gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o. Thu May 12 10:46:27 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (read_unwind_info): Make sure elf_unwind_size and elf_unwind_entries are always initialized. * hppa-tdep.c (skip_trampoline_code): Handle argument relocation stubs which return directly to the caller rather than to the stub itself. Wed May 11 20:11:51 1994 Stan Shebs (shebs@andros.cygnus.com) * c-exp.y (yyerror): Display a more informative error message. * ch-exp.y (yyerror): Ditto, don't use global yychar. * m2-exp.y (yyerror): Ditto. Tue May 10 11:57:53 1994 Stan Shebs (shebs@andros.cygnus.com) * inflow.c (job_control): Move definition to front of file. Tue May 10 14:42:37 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * maint.c (print_section_table): Rename SEC_SHARED_LIBRARY to SEC_COFF_SHARED_LIBRARY to match corresponding change in bfd. Fri May 6 13:30:22 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (kdb): Remove old init.c creation commands. * configure.in (sparclite): Match on sparclite*. * sparclite/aload.c (main): Only change section addresses for a.out format object files. Fri May 6 13:24:04 1994 Steve Chamberlain (sac@cygnus.com) * config/i386/go32.mh: Define CC. Fri May 6 11:56:54 1994 Stan Shebs (shebs@andros.cygnus.com) * gdbserver/Makefile.in: Remove irrelevant definitions and comments inherited from the gdb Makefile. (BFD_DIR, BFD, BFD_SRC, BFD_CFLAGS): Add from gdb Makefile. (VERSION): Update to 4.12.3. (gdbserver): Remove any existing executable first. (distclean, realclean): Remove nm.h. * gdbserver/low-lynx.c: Add Sparc Lynx support. * gdbserver/low-sparc.c, gdbserver/low-sun3.c (sys/wait.h): Don't use absolute pathname. Thu May 5 12:00:22 1994 Stan Shebs (shebs@andros.cygnus.com) * rs6000-nat.c (vmap_ldinfo): Don't fail if fstat returns an error. Wed May 4 06:56:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * infrun.c (proceed, normal_stop, wait_for_inferior), breakpoint.c (print_it_normal): Add annotations for the inferior starting and stopping, and for all the various messages related to how it stopped. * printcmd.c (do_one_display): Annotate. * stack.c (print_frame_info): Annotate printing of stack frames. Wed May 4 18:15:51 1994 Stu Grossman (grossman@cygnus.com) * remote.c (get_offsets): Handle case where stub doesn't support qOffsets message. Wed May 4 15:30:39 1994 Per Bothner (bothner@kalessin.cygnus.com) Add partial support for g++ code compiled with -fvtable-thunks. * c-valprint.c (c_val_print): Add vtblprint support when using thunks. * cp-valprint.c (cp_is_vtbl_member): A vtable can be an array of pointers (if using thunks) as well as array of structs (otherwise). * cp-valprint.c (vtbl_ptr_name_old, vtbl_ptr_name): Move to global level, and make the latter non-static (so define_symbol can use it). * stabsread.c (define_symbol): If the type being defined is a pointer type named "__vtbl_ptr_type", set the TYPE_NAME to that name. * symtab.h (VTBL_PREFIX_P): Allow "_VT" as well as "_vt". * values.c (value_virtual_fn_field): Handle thunks. * values.c (value_headof): Minor efficiency hack. * values.c (value_headof): Incomplete thunk support. FIXME. Wed May 4 06:56:03 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * valprint.c (print_longest): Clarify comment about use_local. * printcmd.c, defs.h (print_address_numeric), callers in symmisc.c, symfile.c, stack.c, source.c, remote.c, infcmd.c, cp-valprint.c, core.c, ch-valprint.c, c-valprint.c, breakpoint.c, exec.c: New argument use_local. * source.c (identify_source_line): Use filtered output. Use print_address_numeric. * core.c (memory_error), symtab.c (cplusplus_hint, decode_line_1), language.c (type_error, range_error): Use filtered output. * utils.c (error_begin): Update comment to tell people to use filtered output. * Makefile.in (HFILES_WITH_SRCDIR): List bfd.h. (HFILES_NO_SRCDIR): List gdbcore.h not gdbcore_h, so as not to get bfd.h. Tue May 3 07:41:33 1994 Jim Kingdon (kingdon@cygnus.com) * procfs.c (procfs_wait): Reinstate code which deduces the signal from the fault, #ifndef FAULTED_USE_SIGINFO. * config/sparc/tm-sun4sol2.h: Define FAULTED_USE_SIGINFO. Fri Apr 29 18:15:04 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * breakpoint.c (breakpoint_1): Annotate each field of the headers. Explicitly annotate each record. Fri Apr 29 15:56:18 1994 Stan Shebs (shebs@andros.cygnus.com) * xcoffexec.c: Reformat to standards and lint. (language.h): Include. (exec_close): Declare arg "quitting". (file_command): Declare arg "from_tty". (map_vmap): Cast xmalloc result to PTR. * rs6000-nat.c: Reformat to standards and lint. (exec_one_dummy_insn): Use char array for saved instruction. (fixup_breakpoints): Declare. (vmap_ldinfo): Be more informative in fatal error messages. (xcoff_relocate_symtab): Define to return void. * xcoffsolib.h: Reformat to standards, improve comments. * config/rs6000/nm-rs6000.h (xcoff_relocate_symtab): Declare. Thu Apr 28 08:40:56 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * utils.c, defs.h (error_begin): New function. (quit): Print annotation before printing the error message. * main.c (return_to_top_level): Print annotation before doing the longjmp. * symtab.c (decode_line_1): Call error not warning and then return_to_top_level. Call error_begin and printf_unfiltered rather calling warning (before calls to return_to_top_level). * core.c (memory_error): Use error_begin, printf_unfiltered, print_address_numeric and return_to_top_level instead of error. Cleans up a FIXME-32x64. * language.c (type_error, range_error): Call error_begin not just target_terminal_ours. * dbxread.c (stabsect_build_psymtabs): Assign to sym_stab_info directly, rather than via DBX_SYMFILE_INFO. A cast on the left side of an assignment is non-portable. * utils.c (query): Change syntax of query annotations to be consistent with other input annotations. (prompt_for_continue): Likewise for prompt-for-continue annotation. Thu Apr 28 01:20:39 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mdebugread.c (psymtab_to_symtab_1): Do not call sort_blocks for stabs symtabs. * mips-tdep.c (mips_skip_prologue): Handle prologues for functions that have a stack frame size of 32k or larger (from Paul Flinders). Remove #if 0'd code. Wed Apr 27 16:33:51 1994 Stan Shebs (shebs@andros.cygnus.com) * lynx-nat.c (CANNOT_STORE_REGISTER): Add a fallback definition for Lynx platforms that need it. * config/nm-lynx.h (__LYNXOS): Define if not already defined. Wed Apr 27 16:01:37 1994 Jim Kingdon (kingdon@cygnus.com) * procfs.c (procfs_wait): Use the signal from the pr_info rather than trying to deduce it from the fault. Wed Apr 27 12:22:46 1994 Steve Chamberlain (sac@cygnus.com) * printcmd.c (print_address_symbolic): Initialize name to empty string to avoid core dump if lookup fails. * remote-e7000.c (printf_e7000debug): Error if target not open. Tue Apr 26 22:45:24 1994 Stu Grossman (grossman at cygnus.com) * i386-nlmstub.c: Update to be more in line with PIN stub. * nlm/gdbserve.c (putDebugChar): Install bug fix from i386-nlmstub. * (hex2mem): Init ptr. * General cleanups to use ConsolePrintf, standard prologues, etc... Tue Apr 26 10:23:04 1994 Stu Grossman (grossman at cygnus.com) * i386-nlmstub.c: More changes to be compatible with remote.c. * dbxread.c: Move a bunch of strncmps out of process_one_symbol into (the far less frequently called) dbx_symfile_read. * i386-nlmstub.c: An interim version till we get PIN for the x86. Tue Apr 26 09:50:45 1994 Stu Grossman (grossman at cygnus.com) * dbxread.c (record_minimal_symbol): Record the section associated with the symbol to make dynmaic relocation work. * (dbx_symfile_read, process_one_symbol): Fixes to work around Solaris brain-damage which don't apply to relocatable object files. * (stabsect_build_psymtabs): New routine to read stabs out of an arbitrarily named section. * nlmread.c (nlm_symtab_read): Read ALL syms from the NLM, not just globals. * (nlm_symfile_read): Call stabsect_build_psymtabs to read the stabs out of the nlm. * partial-stabs.h (cases 'f' & 'F'): Fixes to work around Solaris brain-damage which don't apply to relocatable object files. * remote.c (putpkt): Improve error reporting and error handling. * (get_offsets): Temporary kludge to force data & bss sections to have the same relocation. * stabsread.c (define_symbol, scan_file_globals): Record section info in sym. Sat Apr 23 19:05:52 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * breakpoint.c (breakpoint_1): Annotate each field of output. Add FIXME-32x64 comment. Fri Apr 22 16:43:54 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * infrun.c (wait_for_inferior): Move call to flush_cached_frames to after call to target_wait. This means that flush_cached_frames can call target_terminal_ours if it wants to. * infrun.c (wait_for_inferior) [HAVE_NONSTEPPABLE_WATCHPOINT]: Add comment about why the code is dubious. * stabsread.c (read_type): Call read_type, not nonexistent os9k_read_type. Fri Apr 22 14:25:36 1994 Kung Hsu (kung@mexican.cygnus.com) * remote-os9k.c (rombug_fetch_registers): set trace mode correctly. * remote-os9k.c (rombug_read_inferior_memory): cache data in buffer. * os9kread,c (read_os9k_psymtab): process file symbol to truncate extra info. * os9kread.c (os9k_read_ofile_symtab): proper casting of args passed to process_one_symbol. * stabsread.c (read_type): process os9k functio prototype. Fri Apr 22 11:27:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * solib.c (symbol_add_stub): If so->textsection is NULL, don't dump core. Thu Apr 21 07:45:49 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * utils.c (prompt_for_continue): Annotate prompt. (query): Annotate query. * printcmd.c (print_frame_args): Change syntax of argument annotation to make name and value part of a single group of annotations, not two separate groups. * cp-valprint.c (cp_print_value_fields): Likewise for fields. * valprint.c (val_print_array_elements): Change syntax of annotation to be more concise. * main.c, defs.h (command_line_input): New argument tells what string to include in the annotations. * symtab.c (decode_line_2), main.c (read_command_lines, command_loop): Change callers. * breakpoint.c (watch_command): Use (CORE_ADDR)0, not NULL, for target null pointer. * blockframe.c (find_frame_addr_in_frame_chain): Likewise. * printcmd.c (output_command): Annotate things we print here too. * printcmd.c (print_command_1): Add "value-history-value" annotation. * Move declaration of print_value_flags from defs.h to value.h. * main.c (command_line_input): Call wrap_here as well as gdb_flush. Thu Apr 21 09:29:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dbxread.c (read_dbx_dynamic_symtab): Reinstall support for sun3, BFD handles sun3 dynamic relocations now. * elfread.c (elf_symtab_read, elf_symfile_read): Handle dynamic symbol table. Wed Apr 20 19:41:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * printcmd.c (print_command_1): Annotate the top-level expressions that we print. (print_frame_args): Annotate each argument. * printcmd.c, defs.h (print_value_flags): New function. * cp-valprint.c (cp_print_value_fields): Annotate each field. * valprint.c (val_print_array_elements): Annotate each array element. Wed Apr 20 13:18:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * findvar.c (read_var_value): Handle LOC_REPARM_ADDR case correctly, the register contains a pointer to the type, not the type itself. Mon Apr 11 10:44:35 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * main.c (main): Accept --annotate=N option and make --fullname the same as --annotate=1. (command_line_input): Print annotatation before and after prompt. * blockframe.c (flush_cached_frames): Print annotation. * Rename frame_file_full_name to annotation_level and move it from symtab.h to defs.h. * source.c (identify_source_line): If annotation_level > 1, change output format. * breakpoint.c: Print annotation whenever a breakpoint changes. * main.c: New variable server_command. (command_line_input): Parse "server " and set server_command. (dont_repeat): Check server_command. Wed Apr 20 08:37:16 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (xcoff_next_symbol_text): Don't return before updating raw_symbol and symnum. Return a value in the case where we complained. * dstread.c, coffread.c: Don't define pending_blocks; buildsym.c takes care of it. * parse.c: Don't define block_found; it is defined in symtab.c. * parser-defs.h: Add comment regarding block_found. Tue Apr 19 09:46:05 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * hppa-tdep.c (internalize_unwind_info): Delete unused indexp argument. Mon Apr 18 13:18:56 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dbxread.c (read_dbx_dynamic_symtab): Relocate BFD symbols by section vma. Do not read dynamic relocs for sun3 executables to avoid BFD assertion message. Mon Apr 18 10:08:07 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * nm-hppab.h (KERNEL_U_ADDR): Define. (FIVE_ARG_PTRACE): Likewise. (CANNOT_STORE_REGISTER): Likewise. * nm-hppah.h (KERNEL_U_ADDR): Define. (FIVE_ARG_PTRACE): Likewise. (CANNOT_STORE_REGISTER): Likewise. (NEED_TEXT_START_END): Likewise. * tm-hppah.h (NEED_TEXT_START_END): Delete definition. * xm-hppah.h (KERNEL_U_ADDR): Delete definition. (FIVE_ARG_PTRACE): Likewise. * xm-hppab.h (KERNEL_U_ADDR): Delete definition. (FIVE_ARG_PTRACE): Likewise. * hppa-tdep.c (read_unwind_info): Make static. (restore_pc_queue): Indirect through the target vector to reload the register state. Sat Apr 16 22:20:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * paread.c (compare_unwind_entries): Delete function. It's been moved into hppa-tdep.c. (read_unwind_info): Likewise. (pa_symfile_read): No longer call read_unwind_info. The unwind tables will be read in as they are needed. * hppa-tdep.c (compare_unwind_entries): New function. (read_unwind_info, internalize_unwinds): Likewise. (find_unwind_entry): Read in unwind information on demand. Fri Apr 15 11:53:46 1994 Stan Shebs (shebs@andros.cygnus.com) * source.c (DIRNAME_SEPARATOR): New macro, replaces all references to : in search path processing. * defs.h (qsort): Rename argument in prototype. * symtab.h (SAYMBOL_VALUE): Rename value field, avoids bugs in some compilers. * breakpoint.c, exec.c, mdebugread.c, mipsread.c, xcoffexec.c (false): Eliminate usages. Fri Apr 15 11:35:19 1994 Steve Chamberlain (sac@cygnus.com) * h8500-tdep.c (initialize_h8500_tdep, large_command): All references to value changed to value_ptrlage_command is now called big_command. All references to value changed to value_ptr. * remote-e7000.c (e7000_wait): Use target_waitstatus and SETSTOP * remote-hms.c (hms_wait): Timeout after five seconds. * ser-go32.c (dosasync_read): Poll if timeout < 0. * config/tm/tm-h8500.h (BEFORE_MAIN_LOOP_HOOK): Deleted. * config/sh/tm-sh.h (BREAKPOINT): Is now sleep opcode. Thu Apr 14 07:01:56 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * procfs.c (procfs_wait): Protect watchpoint code with appropriate #ifdefs. (procfs_set_watchpoint, procfs_stopped_by_watchpoint): Likewise. Wed Apr 13 14:52:46 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * breakpoint.h (enum bptype): Add bp_hardware_watchpoint and bp_watchpoint_scope breakpoints. (struct breakpoint): Add val_chain and related_breakpoint fields for use by watchpoints. * breakpoint.c (within_scope): Delete. No longer used. (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition. (target_{remove,insert}_watchpoint): Likewise. (can_use_hardware_watchpoint): New function. (remove_breakpoint): New function to remove a single breakpoint or hardware watchpoint. (insert_breakpoints): Handle insertion of hardware watchpoints. Store a copy of the value chain derived from the watchpoint expression. (remove_breakpoints): Simplify by using remove_breakpoint. (delete_breakpoint): Likewise. (watchpoint_check): Delete the watchpoint and watchpoint scope breakpoints when the watchpoint goes out of scope. Save & restore the current frame after checking watchpoints. (breakpoint_init_inferior): Likewise (restarting the program makes all local watchpoints go out of scope). (bpstat_stop_status): Handle hardware watchpoints much like normal watchpoints. Delete the watchpoint and watchpoint scope breakpoint when the watchpoint goes out of scope. Remove and reinsert all breakpoints before returning if we stopped when a hardware watchpoint fired. (watch_command): Use a hardware watchpoint when possible. If watching a local expression, build a scope breakpoint too. (map_breakpoint_numbers): Also call given function for any related breakpoints. (disable_breakpoint): Never disable a scope breakpoint. (enable_breakpoint): Handle hardware breakpoints much like normal breakpoints, but recompute the watchpoint_scope breakpoint's frame and address (if we have an associated scope breakpoint). (read_memory_nobpt): Handle hardware watchpoints like normal watchpoints. When necessary handle watchpoint_scope breakpoints. (print_it_normal, bpstat_what, breakpoint_1, mention): Likewise. (clear_command, breakpoint_re_set_one, enable_command): Likewise. (disable_command): Likewise. * blockframe.c (find_frame_addr_in_frame_chain): New function. Extern prototype added to frame.h * infrun.c (wait_for_inferior): Set current_frame and select a frame before checking if we stopped due to a hardare watchpoint firing. Handle stepping over hardware watchpoints. (normal_stop): Remove unnecessary call to select_frame. * value.h (value_release_to_mark): Declare. * values.c (value_release_to_mark): New function. * procfs.c (procfs_wait): Add cases for hardware watchpoints. (procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions. * hppab-nat.c (hppa_set_watchpoint): New function. * config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define. (HAVE_STEPPABLE_WATCHPOINT): Define. (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define. (target_{insert,delete}_watchpoint): Define. * config/mips/nm-irix4.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define. (STOPPED_BY_WATCHPOINT, HAVE_NONSTEPPABLE_WATCHPOINT): Likewise. (target_{insert,remove}_watchpoint): Likewise. Mon Apr 11 19:21:27 1994 Stu Grossman (grossman at cygnus.com) * xcoffread.c (read_xcoff_symtab): Ignore symbols of class C_EXT, smtyp XTY_LD, sclass XMC_DS (external data segment label). They often have the same names as debug symbols for functions, and confuse lookup_symbol(). Mon Apr 11 10:44:35 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * remote.c: Around redefinition of PBUFSIZE, adjust whitespace. * config/pa/tm-hppa.h (REGISTER_BYTES): Use 4 rather than REGISTER_RAW_SIZE (1). Together these changes work around a bug in HP's compiler. Both seem to be necessary. Mon Apr 11 09:18:24 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * paread.c (pa_symtab_read): Handle ST_STUB symbols and symbols with scope SS_EXTERNAL. ST_ENTRY symbols in dynamic executables are type mst_solib_trampoline. Fri Apr 8 17:14:37 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * config/m68k/es1800.mt: Change comments. Fri Apr 8 17:14:37 1994 Rob Savoye (rob@darkstar.cygnus.com) * config/m68k/monitor.mt (TDEPFILES): Don't include remote-es.o. Fri Apr 8 15:35:30 1994 Stu Grossman (grossman at cygnus.com) * lynx-nat.c: Restore regmap structure for SPARC. It's needed for core files. Fri Apr 8 14:53:35 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * values.c (unpack_long): Remove obsolete comment about using a switch statement. * symfile.c (symbol_file_command): Add comments about command syntax. Thu Apr 7 17:25:21 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Jim Kingdon (kingdon@cygnus.com) * infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. Thu Apr 7 17:22:54 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * configure.in: Add mips-*-sysv4* support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in . * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries. Thu Apr 7 15:11:11 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * dbxread.c (read_dbx_dynamic_symtab): Adjust for recent changes to BFD handling of dynamic symbols. Tue Apr 5 15:29:25 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * hppa-tdep.c (hppa_fix_call_dummy): If FUN is a procedure label, then gets its real address into FUN and its GOT/DP value into %r19. * tm-hppa.h (CALL_DUMMY): Use %r20, not %r19 as a temporary. * hppa-tdep.c (frameless_function_invocation): If no unwind descriptor was found, then assume this was not a frameless function invocation. (frame_saved_pc): If the saved PC is in a linker stub, then return the return address which the linker stub will return to. * xm-hppab.h: Never define USG. * xm-hppah.h: Always define USG. Tue Apr 5 12:58:47 1994 Per Bothner (bothner@kalessin.cygnus.com) * values.c (unpack_long, value_from_longest), valarith.c (value_binop): Allow TYPE_CODE_RANGE. Fri Apr 1 14:04:34 1994 Jason Merrill (jason@deneb.cygnus.com) * symfile.c (deduce_language_from_filename): .cpp is a C++ extension. Fri Apr 1 00:44:00 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) For SVR4 targets, enable gdb to set breakpoints in shared library functions before the executable is run. * elfread.c (elf_symtab_read): Handle symbols for shared library functions. * sparc-tdep.c (in_solib_trampoline): Renamed to in_plt_section and moved to objfiles.c. * objfiles.c (in_plt_section): Moved to here from sparc-tdep. * config/tm-sysv4.h (IN_SOLIB_TRAMPOLINE): Use new in_plt_section. * config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE): Removed, the new generic definition from tm-sysv4.h works for Solaris. Wed Mar 30 16:14:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfread.c (elf_symtab_read): Change storage_needed, number_of_symbols and i to long. Rename get_symtab_upper_bound to bfd_get_symtab_upper_bound. Check for errors from bfd_get_symtab_upper_bound and bfd_canonicalize_symtab. * nlmread.c (nlm_symtab_read): Same changes. Wed Mar 30 11:43:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (xcoff_next_symbol_text): New function. (read_xcoff_symtab): Set next_symbol_text_func to it. Move raw_symbol outside of read_xcoff_symtab. * remote.c (getpkt): Remove unused "out" label. Wed Mar 30 09:15:42 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * breakpoint.c (print_it_normal): Allow GDB to notify the user about more than one watchpoint being triggered. Wed Mar 30 08:24:18 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config/m68k/tm-dpx2.h: Include tm-m68k.h not nonexistent tm-68k.h. Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * blockframe.c (find_pc_partial_function): mst_file_text symbols do not live in the shared library transfer table. * ch-exp.y (decode_integer_value, match_character_literal, match_bitstring_literal): Guard tolower calls with isupper, tolower on old BSD systems blindly subtracts a constant. * dbxread.c (read_ofile_symtab): Check for __gnu_compiled_* as well when determining the producer of the object file. * mdebugread.c (has_opaque_xref): New function to check for cross reference to an opaque aggregate. * mdebugread.c (parse_symbol, parse_partial_symbols): Do not enter typedefs to opaque aggregates into the symbol tables. * mdebugread.c (parse_external): Remove skip_procedures argument, it has always been 1. Remove code that handled stProc symbols, it was never executed and was wrong, as the index of a stProc symbol points to the local symbol table and not to the auxiliary symbol info. Update caller. * mdebugread.c (parse_partial_symbols): Do not enter external stProc symbols into the partial symbol table, they are already entered into the minimal symbol table. * config/i386/tm-symmetry.h: Clean up, it is now only used for Dynix. Remove all conditionals and definitions for ptx. I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c. Fix addresses of floating point registers in REGISTER_U_ADDR. STORE_STRUCT_RETURN now handles cc and gcc conventions. FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through signal trampoline code work. * config/i386/xm-symmetry.h: Clean up, it is now only used for Dynix. Remove all conditionals and definitions for ptx. Remove KDB definitions. * symm-nat.c (store_inferior_registers): Fetch registers before storing them to obtain valid floating point control registers. Store fpu registers. * symm-nat.c (print_1167_control_word): Dynix 3.1.1 defines FPA_PCR_CC_C0 and FPA_PCR_CC_C1, avoid duplicate case value. * symm-nat.c (fetch_inferior_registers, child_xfer_memory): Fix typos. * symm-nat.c (child_resume): Update type of `signal' parameter. * symm-tdep.c (I386_REGNO_TO_SYMMETRY): Moved to tm-symmetry.h. Tue Mar 29 23:01:33 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * hppa-tdep.c (hppa_fix_call_dummy): Use an alternate method for calling import stubs for functions in shared libraries. Tue Mar 29 21:14:04 1994 Per Bothner (bothner@kalessin.cygnus.com) * ch-exp.y: Implement SIZE(mode_name) and SIZE(expression). * ch-lang.c (chill_is_varying_struct): Magic string is was "" is now "__var_length" (more portable). Tue Mar 29 19:41:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * remote.c (getpkt): If we get a timeout, actually retry rather than just giving up the first time it happens. * remote.c: Document sequence numbers. (remote_store_registers): Change syntax of 'P' request so that it never looks like a sequence number. Tue Mar 29 16:06:01 1994 Kung Hsu (kung@mexican.cygnus.com) * os9kread.c (record_minimal_symbol): add section_offset to relocate minimal symbol table. * os9kread.c (read_minimal_symbols): ditto. * os9kread.c (os9k_symfile_init): increase size of dbg and stb file names. * os9kread.c (read_os9k_psymtab): if there's no dbg file, just return. Also if file addr is 0 leave it 0, not to relocate. * remote-os9k.c (_initialize_remote_os9k): add 'set remotexon', 'set remotexoff' and 'set remotelog' commands. Tue Mar 29 12:38:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * remote.c (remote_store_registers): Add 'P' request to set an individual register. (remote_write_bytes, remote_read_bytes): Use %lx, not %x, to print a target address. Sat Mar 26 07:05:18 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config/sparc/tm-sparc.h: Define USE_REGISTER_NOT_ARG. * stabsread (define_symbol): If USE_REGISTER_NOT_ARG, go back to combining all 'p' and 'r' pairs into a LOC_REGPARM. * command.c (do_setshow_command, case var_string): Never add a space to the end of the string. * NEWS: Document this change. * .gdbinit: Add a space to the "set prompt" command. Fri Mar 25 12:40:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * m3-nat.c, i386m3-nat.c, config/i386/i386m3.mh: Many minor changes to make it compile (it doesn't link yet). * buildsym.c (start_subfile, patch_subfile_names), demangle.c (set_demangling_style, set_demangling_command): Use savestring not strdup. We were not dealing properly with a NULL return from strdup, and were not declaring strdup (the system header may or may not have it). * valprint.c (val_print): Remove inaccurate comment about what types can be stub types. * config/i386/ptx.mh (XDEPFILES): Add coredep.o. Delete infptrace.o. * symm-nat.c (child_wait, _initialize_symm_nat, kill_inferior): Supply alternate version if ATTACH_DETACH is not defined. * ptx4-nat.c, config/i386/{nm-ptx4.h, ptx4.mh, ptx.mt, ptx4.mt, tm-ptx.h, tm-ptx4.h, xm-ptx.h, xm-ptx4.h}: New files. * configure.in: Recognize i[34]86-sequent-sysv4* host. Fri Mar 25 10:14:03 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * hppa-tdep.c (skip_prologue): Do nothing if not at the beginning of a function. (skip_trampoline_code): Rewrite and add support for argument relocation stubs stubs, import/export stubs, calls through "_sr4export" and cascaded trampolines. * hppa-tdep.c (skip_prologue): Return "pc" not zero if no unwind descriptor is found. * tm-hppa.h (NUM_REGS): Bump to 128 registers. (REGISTER_NAMES): Add entries for "right-half" of FP registers. (REGISTER_RAW_SIZE, MAX_REGISTER_RAW_SIZE): Do not treat FP regs differently. All registers are four bytes. (REGISTER_BYTES, REGISTER_BYTE): Simplify now that all registers are the same size. (REGISTER_VIRTUAL_TYPE): Use builtin_type_float for all FP regs. * hppa-tdep.c (pa_print_fp_reg): Update to print even numbered FP registers as both single and double values (fetching 2nd 32bit half as necessary). Annotate each register printed with its precision. * paread.c (read_unwind_info): Fix off-by-one error. Fri Mar 25 08:33:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * main.c (complete_command): Deal with it if arg is NULL. Thu Mar 24 07:12:09 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config/mips/tm-mips.h (SETUP_ARBITRARY_FRAME): Revise comment regarding using the PC--using the PC is necessary and all the FIXME comments in the world won't make it go away. * valops.c (value_at, value_at_lazy): Give error if we dereference a pointer to void. * gdbtypes.h: Fix comments regarding TYPE_CODE_VOID. * stabsread.c: Use 1, not 0, for TYPE_LENGTH of void types. * stabsread.c (patch_block_stabs): Add comment about what happens if the definition is in another compilation unit from the stab. * dbxread.c (end_psymtab): Add comment about empty psymtabs. Wed Mar 23 07:50:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * main.c (complete_command): New command, from Rick Sladkey . (symbol_completion_function): Don't declare rl_point and rl_line_buffer; they are now declared in readline.h. (show_commands): Don't declare history_base; it is declared in history.h. * command.c (lookup_cmd): Don't delete trailing whitespace. Reverts change of 14 May 1989. Wed Mar 23 16:14:52 1994 Stu Grossman (grossman at cygnus.com) * minsyms.c (prim_record_minimal_symbol): Move section deduction code from prim_record_minimal_symbol_and_info() to here. Callers of the latter can legitimately supply a section number of -1. Wed Mar 23 07:50:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdbtypes.h, gdbtypes.c: Add comments regarding whether static member functions have an element in args for a (nonexistent) this pointer. Tue Mar 22 20:12:53 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * config/pa/tm-hppao.h (NO_PC_SPACE_QUEUE_RESTORE): Define. * hppa-tdep.c (hppa_pop_frame): Do not restore the PC space queue if NO_PC_SPACE_QUEUE_RESTORE is defined. * stabsread.c (REG_STRUCT_HAS_ADDR): Accept additional argument for the structure's type. All callers changed. * valops.c (call_function_by_hand): Check REG_STRUCT_HAS_ADDR for each structure argument rather than assuming it's either true or false for all structure arguments. * config/pa/tm-hppa.h (REG_STRUCT_HAS_ADDR): Depend only on the length structure passed, not the compiler used. * config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Accept additional argument for the structure's type. Tue Mar 22 15:28:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * values.c (set_internalvar): Don't set var->value until we are sure there won't be an error(). * remote.c (get_offsets): Reinstate comment which was in remote_wait about use of SECT_OFF_TEXT and so on. Mon Mar 21 13:11:30 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * symmisc.c (maintenance_check_symtabs): New function to check consistency of psymtabs and symtabs. * symtab.h (maintenance_check_symtabs): Add prototype. * maint.c: Add new `maint check-symtabs' command. * config/i386/tm-i386aix.h, config/i386/tm-sun386.h, config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_RAW): Fix typo. * config/i386/tm-symmetry.h: Make comment inside #if 0 a real comment. * config/i386/tm-symmetry.h (STORE_STRUCT_RETURN): Cast argument to write_memory to avoid warnings from gcc. * config/i386/xm-symmetry.h: Add missing #endif. * config/i386/nm-symmetry.h (NO_PTRACE_H): Add for Dynix. * config/i386/symmetry.mt (TDEPFILES): Add i386-tdep.o. * config/i386/symmetry.mh (NAT_FILE, NATDEPFILES): Add. Mon Mar 21 11:50:28 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * hppa-tdep.c (hppa_fix_call_dummy): Use value_ptr. (hppa_push_arguments): Likewise. Mon Mar 21 11:02:51 1994 Stu Grossman (grossman at cygnus.com) * alpha-tdep.c: Gobs of changes (many imported from mips-tdep) to improve remote debugging efficiency. Also fixed problems with doing function calls for programs with no entry points. * infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of entry_point_address. * inferior.h (PC_IN_CALL_DUMMY): ditto. * mdebugread.c (parse_symbol, parse_procedure, parse_external, parse_lines): Pass section_offsets info to these routines so that we can relocate symbol table entries upon readin. * (psymtab_to_symtab_1): Set symtab->primary to tell objfile_relocate to do relocations for our symbols. * (ecoff_relocate_efi): New routine to relocate adr field of PDRs (which hang off of the symbol table). * Use prim_record_minimal_symbols_and_info instead of prim_record_minimal_symbols to supply section info to make minimal symbol relocations work. * minsyms.c (prim_record_minimal_symbols_and_info): If section is -1, try to deduce it from ms_type. * objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where appropriate. Handle relocation of MIPS_EFI symbols special. Also, add code to relocate objfile->sections data structure. * remote.c (get_offsets): Use new protocol message to acquire section offsets from the target. * (remote_wait): Get rid of relocation stuff. That's all handled by objfile_relocate now. * config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h. * config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and VM_MIN_ADDRESS. * config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0. Mon Mar 21 10:09:06 1994 Jeff Law (law@snake.cs.utah.edu) * hpread.c (_initialize_hpuxread): Don't call add_symtab_fns if HPREAD is not defined. Sun Mar 20 15:21:57 1994 Doug Evans (dje@cygnus.com) * sparc-tdep.c (sparc_frame_find_save_regs): Use REGISTER_RAW_SIZE instead of 4. * sp64-tdep.c (target_ptr_bit, set_target_ptr_bit): Deleted, can no longer set this at run time. * config/sparc/sp64.mt (SIMFILES): Use remote-sim.o now. (TM_CLIBS): Define to -lm, the simulator uses the sqrt() function. * config/sparc/tm-sp64.h (FPS_REGNUM, CPS_REGNUM): Define (so sparc-tdep.c compiles). (TARGET_PTR_BIT): Must be a constant now, fix at 64. Sat Mar 19 08:51:12 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config/m68k/{cisco.mt,tm-cisco.h}: New files. * Makefile.in (ALLPARAM, ALLCONFIG): Add them. * configure.in: Recognize m68*-cisco*-*. * Makefile.in (TAGS): Use variables directly, rather than using find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster and means that these filenames no longer need be unique across all the config/* directories. * configure.in: Put the config/*/ into TM_FILE, etc. * m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk and trapv exceptions. * target.h (struct section_table), objfiles.h (struct obj_section): Change name of field sec_ptr to the_bfd_section. More mnemonic and avoids the (sort of, for the ptx compiler) name clash with the name of the typedef. * exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c, solib.c, irix5-nat.c, objfiles.c, remote.c: Change users. * utils.c: Include readline.h. * Makefile.in (utils.o): Add dependency. * remote.c (getpkt): Add support for run-length encoding. Fri Mar 18 19:11:15 1994 Steve Chamberlain (sac@jonny.cygnus.com) * utils.c (prompt_for_continue): Call readline, not gdb_readline. Fri Mar 18 10:25:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * dstread.c (record_minimal_symbol): New arg objfile. Pass it to prim_record_minimal_symbol. Callers: Pass it. * regex.c (EXTEND_BUFFER): Adjust pointers within buffer by computing their offset from the start of the old buffer and adding to the new buffer, rather than by assuming we can add the difference between the old buffer and the new buffer (it might not fit in an int). Merge in cosmetic differences from emacs regex.c version of this macro. Wed Mar 16 15:28:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * Makefile.in (install-only): Fix use of program_transform_name. Wed Mar 16 07:18:43 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * printcmd.c: Remove "set print fast-symbolic-addr off" command. The bug which it worked around was fixed on 25 Feb 94 in coffread.c, so I'm nuking the command. * symtab.c (find_addr_symbol): Comment out, no longer used. * main.c (main): Don't init_source_path for the -cd argument. Now that source_path doesn't contain the current_directory from when GDB started up, init_source_path is no longer useful (and is harmful because it clobbers a source_path set in $HOME/.gdbinit). * TODO: Remove item about line numbers being off. It is useless and confusing without a reproducible test case (it mentions proceed(), but I was able to step through proceed without trouble). Tue Mar 15 13:39:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) For Sunos 4.x targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * symtab.h (minimal_symbol_type): Add mst_solib_trampoline type. * parse.c (write_exp_msymbol), symmisc.c (dump_msymbols), symtab.c (list_symbols): Handle mst_solib_trampoline. * minsyms.c (lookup_minimal_symbol): Handle mst_solib_trampoline for all targets, remove IBM6000_TARGET dependencies. * dbxread.c (read_dbx_dynamic_symtab): New function. * dbxread.c (dbx_symfile_read): Use it. * dbxread.c (SET_NAMESTRING): Set namestring to "" instead of "foo" if the string index is corrupt. * xcoffread.c (read_xcoff_symtab): Use mst_solib_trampoline instead of mst_unknown. * symtab.c (list_symbols): Take from_tty as parameter and pass it to break_command. Handle mst_file_* minimal symbol types. * config/i386/tm-i386bsd.h: Give just macro name, not args, to #undef. Tue Mar 15 11:40:43 1994 Kung Hsu (kung@mexican.cygnus.com) * c-exp.y(yylex): fix potential memory overflow. Tue Mar 15 10:33:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * environ.c (set_in_environ): Eliminate special handling of PATH and GNUTARGET. * putenv.c: Removed, conflicts with system declaration of putenv on RS/6000 running AIX 3.2.5, and above change makes it unnecessary. * Makefile.in: Change accordingly. * procfs.c (procfs_create_inferior): Change comment accordingly. Tue Mar 15 10:05:27 1994 Jim Kingdon (kingdon@cygnus.com) * rs6000-tdep.c: Change value to value_ptr. Sun Mar 13 17:19:03 1994 Jeff Law (law@snake.cs.utah.edu) * hpread.c (read_hpux_symtab: Correctly determine the namespace and address class of SVAR, DVAR, TYPEDEF, TAGDEF, CONST, and MEMENUM symbols. Do not include function-scoped variables in the partial symbol table. Sun Mar 13 09:45:51 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * i386m3-nat.c: Include floatformat.h. (get_i387_state): Use memset not bzero. * Version 4.12.3. * Makefile.in: Enable commented out getopt_h, bfd_h, etc. Change ieee-float.h to floatformat.h. * valprint.c (val_print_string): Ignore error if the error happened after a terminating '\0'. * c-valprint.c (c_val_print): Never add 1 to return value from val_print_string; just return what it returns. * target.h (enum target_signal): Add TARGET_SIGNAL_FIRST, for looping through all of the enums. * infrun.c (signals_info): Use it. Fri Mar 11 08:08:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * main.c (main): When printing warning about bad baud rate, don't use warning(); it relies on current_target which isn't set up yet. * breakpoint.c (_initialize_breakpoint): Update docstring for tbreak to match what the code actually does. Don't mention tbreak in docstrings for "enable once" or "enable breakpoints once". Thu Mar 10 08:52:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Don't put a semicolon after while (0). That defeats the whole purpose of using do . . . while (0). * mdebugread.c (parse_partial_symbols): Don't use ?: expression as list for ADD_PSYMBOL_TO_LIST; the macro takes its address and using a ?: expression as an lvalue is not portable. * stabsread.c (define_symbol): If REG_STRUCT_HAS_ADDR, also convert a LOC_ARG to a LOC_REF_ARG. Update code which combines 'p' and 'r' symbol descriptors into a single symbol to look for a LOC_REF_ARG. * README, config/sparc/tm-sparc.h: Update comments. Wed Mar 9 21:43:24 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mdebugread.c (parse_type): Do not complain for types with an `indexNil' aux index, these are simply undefined types. Remove indexNil check from caller of parse_type. * mdebugread.c (parse_partial_symbols): Do not enter stGlobal, scCommon symbols into the minimal symbol table, their value is the size of the common, not its address. Handle scInit, scFini, scPData and scXData sections. Use minimal symbol type mst_file_* for stLabel symbols, instead of mst_*. Enter stProc symbols into the global_psymbols list once, not into the static_psymbols_list. Get rid of dummy psymtab if it is empty, to allow proper detection of stripped executables. * mdebugread.c (cross_ref): Allow cross references to Fortran common blocks. Wed Mar 9 15:23:19 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * stabsread.c (common_block_end, fix_common_block): Stash the struct pending * in the SYMBOL_TYPE, not the SYMBOL_NAMESPACE, so as to not assume that a pointer fits in an enum. Wed Mar 9 18:56:36 1994 Kung Hsu (kung@mexican.cygnus.com) * os9kread.c (fill_sym): check compiler verion number for pre- UltraC compiler. * os9kread.c (os9k_process_one_symbol): address of symbol is relative to section not module. * stabsread.c (define_symbol): add symbol type 's' as local symbol for os9k. * remote-os9k.c: add command 'set monitor_log' to turn on or off monitor logging. * remote-os9k.c: fix bug in delete breakpoint, single step trace. * remote-os9k.c: fix bug in 'set remotebaud' function. * remote-os9k.c (rombug_link): minimize checking so to improve speed. * symfile.c (symbol_file_command): check if failed to link, also make the command be able to accept more than one filenames. * target.c (target_link): check if failed to link with rombug. * config/i386/tm-i386os9k.h : add #define DECR_PC_AFTER_BREAK 0. Wed Mar 9 15:23:19 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * remote-es.c (es1800_child_ops): Don't declare it static. Tue Mar 8 11:42:39 1994 Jim Kingdon (kingdon@cygnus.com) * config/i386/tm-i386v4.h: Give just macro name, not args, to #undef. Tue Mar 8 06:56:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * dbxread.c: New variable lowest_text_address. (record_minimal_symbol, read_dbx_symtab): Set it. (read_dbx_symtab): Use lowest_text_address + text_size instead of end_of_text_address. * config/gould/tm-pn.h: Add comment regarding END_OF_TEXT_DEFAULT. * dbxread.c (end_psymtab): Remove old and commented out capping_global and capping_static. Fix comments regarding N_SO_ADDRESS_MAYBE_MISSING to match the real name of the macro. * parser-defs.h: Add "extern" to start of variable declarations so we don't end up with commons. * parse.c: Define these variables. * irix5-nat.c (find_solib): Cast o_path to CORE_ADDR when using it as one. Mon Mar 7 13:00:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * alpha-tdep.c: Change value to value_ptr. Sun Mar 6 17:36:53 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * solib.c (elf_locate_base): New function to locate the address of the dynamic linker's runtime structure in the dynamic info section. * solib.c (locate_base): Use it instead of iterating over the list of mapped address segments. * solib.c (look_for_base, bfd_lookup_symbol): Removed, no longer necessary. Fri Mar 4 09:50:47 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * hppa-tdep.c (pc_in_linker_stub): Move decl to beginning of file. (pc_in_interrupt_handler): New function. Also add PARAM decl. (find_proc_framesize): Deal with HPUX setting SAVE_SP bit for signal trampoline and interrupt routines. (frame_saved_pc): Handle signal trampolines and interrupt routines. (frame_chain, frame_chain_valid): Likewise. (hppa_frame_find_saved_regs): Likewise. Also deal with special saved regs convention for SP. * tm-hppa[bho].h: FRAME_FIND_SAVED_PC_IN_SIGTRAMP): Define. (FRAME_BASE_BEFORE_SIGTRAMP): Define. (FRAME_FIND_SAVED_REGS_IN_SIGTRAMP): Define. * tm-hppah.h (IN_SIGTRAMP): Define. Thu Mar 3 12:41:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * ch-exp.y (match_simple_name_string): Accept '_' as well as an alphabetic character as the start of a name. * sparclite/Makefile.in (all install): Build and install aload. * configure.in: Accept i[34]86-*-*sysv32 because that is what config.guess and config.sub produce. * mips-tdep.c: Change value to value_ptr. Wed Mar 2 09:17:55 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * breakpoint.c, breakpoint.h, c-valprint.c, ch-valprint.c, cp-valprint.c, eval.c, expprint.c, findvar.c, language.c, objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c, valarith.c, valops.c, valprint.c, value.h, values.c: Replace value with value_ptr. This is for the ptx compiler. * objfiles.h, target.h: Don't declare a "sec_ptr" field using a "sec_ptr" typedef. * symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff. #if 0 i386_float_info. * symm-tdep.c (round): Remove. Also remove sgttyb. * symm-tdep.c: Remove lots of stuff which duplicates stuff from i386-tdep.c. Remove register_addr and ptx_coff_regno_to_gdb. * i386-tdep.c (i386_frame_find_saved_regs): Put in I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix someday. * config/i386/nm-symmetry.h: Change KERNEL_U_ADDR. Move stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to symm-nat.c. Define CHILD_WAIT and declare child_wait(). * config/i386/tm-symmetry.h: Remove call function stuff; stuff in tm-i386v.h is apparently OK. * config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not HAVE_TERMIO. Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and USE_O_NOCTTY. Wed Mar 2 11:31:08 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * osfsolib.c (xfer_link_map_member): Update to use new target_read_string interface. Wed Mar 2 09:17:55 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * infrun.c (wait_for_inferior): In checking remove_breakpoints_on_following_step, check through_sigtramp_breakpoint as well as step_resume_breakpoint. Tue Mar 1 16:22:56 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * os9kread.c (os9k_process_one_symbol): Rename VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK. * symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not (CORE_ADDR)0, from target_link, since that is what it uses. Process name at end, not during parsing (like we did before Kung's change), so that -readnow and -mapped can appear anywhere. Make text_relocation a local variable. * config/i386/i386os9k.mt: Fix comment. * Makefile.in (ALLDEPFILES): Add remote-os9k.c. * os9kread.c: Put "comments" after #endif inside /* */. * stabsread.h: Add os9k_stabs variable. * stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol): Set it. * stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol descriptor in global_symbols not local_symbols. (read_type): If os9k_stabs, accept 'c', 'i', and 'b' type descriptors. (read_type): If os9k_stabs, accept function parameters after 'f' type descriptor. (read_array_type): If os9k_stabs, don't expect index type and expect lower and upper to be separated by ',' not ';'. (read_enum_type): If os9k_stabs, read a number before the first enumeration constant. (os9k_init_type_vector): New function. (dbx_lookup_type): Call it when starting new type vector. * config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION. * (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol. * os9kstab.c: Removed. * Makefile.in: Update accordingly. * objfiles.c (objfile_relocate_data): Removed. * remote-os9k.c (rombug_wait): Call objfile_relocate not objfile_relocate_data. * objfiles.h, objfiles.c: Remove find_pc_objfile. * remote-os9k.c (rombug_wait): Call find_pc_section not find_pc_objfile. * main.c (quit_command): Check inferior_pid; revert Kung change. * remote-os9k.c (rombug_create_inferior): Set inferior_pid. Tue Mar 1 14:56:14 1994 Kung Hsu (kung@mexican.cygnus.com) * os9kread.c: New file to read os9000 style symbo table. * os9kstab.c: new file to read os9000 style stabs. * remote-os9k.c: remote protocol talking to os9000 rombug monitor. * objfiles.c (find_pc_objfile): new function to search objfile from pc. * objfiles.c (objfile_relocate_data): new function to relocate data symbols in symbol table. * objfiles.h: Add two aux fields in struct objfile to handle multiple symbol table files situation like in os9000. * symfile.c: Change so 'symbol-file' command can handle multiple files. Also call target_link() to get relocation infos. * target.c (target_link): new function to get relocation info when a symbol file is requested to load. * main.c (quit_command): take out 'inferior_pid != 0' condition, because in cross mode there's no inferior pid, bit they need to be detached. Makefile.in: add os9kread.c os9kstab.c and .o's. configure.in: add i386os9k target. config/i386/i386os9k.mt: new add. config/i386/tm-i386os9k.h: new add. Tue Mar 1 13:16:10 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP): Handle ucbsigvechandler. * sparc-tdep.c (sparc_frame_saved_pc): Handle ucbsigvechandler. Tue Mar 1 11:54:11 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * target.c, target.h (target_read_string): Provide error detection to caller. Put string in malloc'd space, so caller need not impose arbitrary limits. * solib.c (find_solib): Update to use new interface. * irix5-nat.c (find_solib): Read o_path from inferior (clear_solib): Free storage for o_path. * valprint.c (val_print_string): Add comments. Mon Feb 28 23:54:39 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * symtab.c (decode_line_1): Handle the case when skip_quoted does not advance `p'. Mon Feb 28 12:40:46 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * value.h (struct value): Add modifiable field. * values.c (allocate_value, record_latest_value, value_copy): Set it. (record_latest_value): Don't mess with VALUE_LVAL of value. * valops.c (value_assign): Check it. Reword existing error message on not_lval. * mips-tdep.c (mips_step_skips_delay), config/mips/tm-mips.h (STEP_SKIPS_DELAY): Added. * infrun.c (proceed) [STEP_SKIPS_DELAY]: Check for a breakpoint in the delay slot. * valprint.c (val_print_string): If errcode is set, always print an error, regardless of force_ellipsis. In the non-EIO case, just print the error message rather than calling error(). Don't access *(bufptr-1) if bufptr points to the start of the buffer. When looking for '\0', don't increment bufptr and addr if bufptr started out already at limit. If an error happens on fetching the first character, don't print the string. Sun Feb 27 21:05:06 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * config/m68k/tm-apollo68b.h: Remove HAVE_68881 define; it is obsolete. * i387-tdep.c, i386-tdep.c i386v-nat.c, i386aix-nat.c, i386m3-nat.c, config/m68k/tm-m68k.h, i960-tdep.c config/i960/tm-i960.h, remote-nindy.c, config/m88k/tm-m88k.h, m88k-tdep.c: Use floatformat.h instead of ieee-float.h. * sparc-tdep.c: Remove now-obsolete ieee-float.h stuff * findvar.c: Update comment regarding ieee-float.h. Sun Feb 27 21:39:48 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/i386/tm-i386v4.h (I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP, FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC): Define to make backtracing through the various sigtramp handlers work. * i386-tdep.c (i386v4_sigtramp_saved_pc): New routine to fetch the saved pc from ucontext on the stack for SVR4 signal handling. Fri Feb 25 09:41:11 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * remote.c, remote-mon.c, remote-utils.c, remote-utils.h, target.h, remote-es.c, remote-nindy.c: Don't set baud rate if baud_rate is -1. Remove sr_get_baud_rate and sr_set_baud_rate; just use the global variable itself. When printing baud rate, don't print a baud rate if baud_rate is -1. * coffread.c (read_coff_symtab): Pass mst_file_* to record_minimal_symbol for C_STAT symbols. Put C_EXT and C_STAT symbols in the minimal symbols regardless of SDB_TYPE. Thu Feb 24 08:30:33 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * breakpoint.h (enum bptype): New type bp_through_sigtramp. (bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP. * breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP if we hit a bp_through_sigtramp breakpoint. Remove kludge which ignored bs->stop for a bp_step_resume breakpoint. * infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint which performs one (the check_sigtramp2 one) of the functions which had been handled by the step_resume_breakpoint. For each use of the step_resume_breakpoint, make it still use the step_resume_breakpoint, use the through_sigtramp_breakpoint, or operate on both. Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what. When setting the frame address of the step resume breakpoint, set it to the address for frame *before* the call instruction is executed, not after. * mips-tdep.c (mips_print_register): Print integers using print_scalar_formatted rather than duplicating all the CC_HAS_LONG_LONG and so on. (mips_push_dummy_frame): Use read_register_gen rather than using read_register and then putting it back in target format with store_unsigned_integer. If registers are more than 4 bytes, give an error rather than have some registers overwrite other registers. #if 0 unused include of opcode/mips.h. * symfile.h: Don't declare arguments for coff_getfilename. * defs.h: Revert Kung change regarding FORCE_LONG_LONG. Thu Feb 24 08:06:52 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * configure.in (hppa*-*-osf*): New configuration. * config/pa/hppaosf.mt: New target makefile fragment. * config/pa/tm-hppao.h: New target include file. Thu Feb 24 04:29:19 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * exec.c (print_section_info): Print entry point for exec_bfd only. * ser-unix.c (wait_for): Fix typo in HAVE_TERMIO case. * dwarfread.c: Remove second inclusion of , which causes problems if has no multiple inclusion protection. Wed Feb 23 16:28:55 1994 Jeffrey A. Law (law@cygnus.com) * tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1. (CALL_DUMMY_LENGTH): Changed accordingly. Wed Feb 23 16:21:25 1994 Stu Grossman (grossman at cygnus.com) * sparc-stub.c (trap_low): Make trap handler work for arbitrary numbers of register windows. * sparclite/hello.c: Add factorial function for testing. * salib.c: Use macros instead of constants for I/O addresses to make 931 support easier. * sparclite.h: Change constraint for LOC to "rJ" to force use of register in sta/lda instructions. Wed Feb 23 10:39:18 1994 Jim Kingdon (kingdon@rtl.cygnus.com) * dbxread.c (process_one_symbol): Set block_address_function_relative for COFF like we do for ELF and SOM. Sat Feb 19 03:17:32 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mdebugread.c (new_psymtab): Pass in section_offsets and set them in the pst. * mdebugread.c (handle_psymbol_enumerators): New function to enter the enumerators of an ecoff enum into the partial symbol table. * mdebugread.c (parse_partial_symbols): Call it. * symfile.c (reread_symbols): Initialize objfile->*_psymbols.next. * symmisc.c (dump_psymtab): Fix typo, clean up output of section offsets. Cast psymtab->read_symtab to PTR before passing it to gdb_print_address. * i386-tdep.c (i386_skip_prologue): Skip over instructions that set up the global offset table pointer in pic compiled code. * config/mips/tm-mips.h (FIX_CALL_DUMMY): For big endian targets, error() on TYPE_CODE_FLT arguments whose size is greater than 8, swap all other TYPE_CODE_FLT arguments as mips_push_arguments ensures that floats are promoted to doubles before they are pushed on the stack. Fri Feb 18 23:12:59 1994 Stu Grossman (grossman at cygnus.com) * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h: Fixup cache_on and flush_i_cache so that they work for both the 930 and 932 processors. Rewrite most low level funcs (uart access & cache stuff) to use new ASI access macros in sparclite.h. Also make it easy to access second serial port. Fri Feb 18 22:17:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * hp300ux-nat.c: Don't incloude , , or ; not needed. Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * stack.c (print_frame_info): In "pathological" case, don't distrust the line number information. Fri Feb 18 16:51:14 1994 Kung Hsu (kung@mexican.cygnus.com) * mips-tdep.c (mips_print_register): handle 64 bits register. * valprint.c (print_longest): fix a bug in printing 64 bits value. Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Version 4.12.2. * Makefile.in (install): Do the sed for program_transform_name ourselves instead of worrying about INSTALL_XFORM. This enables users to override INSTALL_PROGRAM in the standard way. * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't depend on Makefile.in. * defs.h, valprint.c: Make longest_to_int a function not a macro. Only test against INT_MIN if a LONGEST is bigger than an int. * README: Change GhostScript to Ghostscript. Fri Feb 18 07:30:55 1994 Jim Kingdon (kingdon@cygnus.com) * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}: Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14 character file names. * Makefile.in (ALLPARAM): Add these files. * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14 character file names. * Makefile.in: Add Kung's new mips64 files. Thu Feb 17 17:25:47 1994 Kung Hsu (kung@mexican.cygnus.com) * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf, mips64el-*-ecoff and mips64-big-*. * defs.h: get rid of FORCE_LONG_LONG. * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction parsing. Change register size to be MIPS_REGSIZE. Thu Feb 17 09:30:22 1994 David J. Mackenzie (djm@thepub.cygnus.com) * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c, osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c, xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names. Fri Feb 11 21:47:24 1994 Steve Chamberlain (sac@sphagnum.cygnus.com) * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust. (remove_commands, add_commands): Add/remove hms-drain when target is connected. Fri Feb 11 16:11:38 1994 Stu Grossman (grossman at cygnus.com) * configure.in: Add Lynx/rs6000 support. * lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error messages. Add rs6000 support. Don't try to modify unwritable registers. * rs6000-nat.c: Move lots of native dependent stuff (like core file support) from rs6000-tdep.c & xcoffexec.c to here. * rs6000-tdep.c: Move native dependent stuff to nat.c. * xcoffexec.c: Move native dependent stuff to nat.c. * config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here from tm file. * config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're really native. * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h: New files to support Lynx/rs6000. Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * README: Remove note about gcc warnings on alpha, these should be gone now. * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c, m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c remote-utils.c, stabsread.c: Include . * regex.c: Include "defs.h", change re_comp argument to const char *. * infptrace.c (fetch_register, store_inferior_registers): Change regaddr to type CORE_ADDR. * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS): Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR. Mon Feb 7 09:21:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * symtab.h: Always define BYTE_BITFIELD to nothing. Mon Feb 7 08:44:17 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used. * configure.in: Remove comment about m68k-em.mt. * Makefile.in: Remove references. Mon Feb 7 08:22:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent BFD_HOST_64_TYPE. Sun Feb 6 15:56:09 1994 Jeff Law (law@wild.cs.utah.edu) * hpread.c (hpux_symfile_init): Use obj_som_* rather than obj_* to access BFD private data. Search for the "$TEXT$" space rather than ".text". (hppa_sym_fns): Add bfd target flavour to initializer. Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * target.c (target_preopen): If target_kill doesn't remove the target from the stack, use pop_target to do it. * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name of TYPE_CODE_PTR or TYPE_CODE_FUNC types. This parallels similar changes to stabsread.c from summer 1993. * remote-udi.c (udi_files_info): If prog_name is NULL, just skip printing the program, rather than passing NULL to printf. (udi_detach): Set udi_session_id to -1 so that udi_close doesn't try to call UDIDisconnect again. Print better message. (udi_kill): Just call UDIDisconnect ourselves, rather than doing it via udi_close. (udi_create_inferior): If udi_session_id is negative, open a new TIP rather than giving an error. * config/mips/mipsm3.mh, config/i386/i386m3.mh, config/ns32k/ns32km3.mh: Define NAT_FILE. * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H (it was inconsistent and namespace-wrong) to NM_M3_H. * m3-nat.c (mach_really_wait): Change parameter name to ourstatus. (m3_open): New function. (m3_ops): Use it. * TODO: Update Mach section. * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver. Sun Feb 6 13:26:21 1994 Per Bothner (bothner@kalessin.cygnus.com) * printcmd.c (printf_command): Add missing single-letter backslash-escape sequences, and improve error message. Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * corelow.c (solib_add_stub, core_open): Pass address of from_tty rather than trying to shove an int into a pointer and back out again. This avoids compiler warnings. * defs.h (alloca): Declare as void *, not char *, on hpux. Don't prototype it, just declare the return type. Sun Feb 6 03:25:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/i386/tm-sun386.h, config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_RAW): Add missing backslash. Sat Feb 5 08:03:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or ZERO_REGNUM, just read it as zero without talking to the board. * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing backslash. * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type) to store_floating, not nonexistent variable len. * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint): New functions. (mips_store_word): Change calling convention to return errors, and to provide old contents if the caller wants it. (mips_xfer_memory): Deal with errors from mips_store_word. * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT define now that remote-mips.c doesn't use BREAKPOINT. * remote-mips.c (mips_create_inferior): Call warning if arguments specified, and then execute "set args" command. Call error, not mips_error, if executable file not specified. * remote-e7000.c: Replace "snoop" command (e7000_noecho) with remote_debug. * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast to unsigned int. Sat Feb 5 05:27:05 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * value.h (print_longest): Rename "value" to "val" in prototype declaration because some compilers don't like arguments whose names are the same as types. * remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char * before passing it to remote_*_bytes. Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com) * h8500-tdep.c (saved_pc_after_call): The size of the pc is memory model dependent. (segmented_command, unsegmented_command, _initialize_h8500_tdep): New commands to change memory model. * remote-e7000.c (_initialize_remote_e7000): Change name of snoop command. * remote-hms.c (hms_load): Remove breakpoints when loaded. (hms_wait): Use new status structure (hms_open): Push the target here. (hms_before_main_loop): Not here. (supply_val, hms_fetch_register, hms_store_register): Cope with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE. * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print all registers in a compact way. Fri Feb 4 07:41:13 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address as CORE_ADDR to match definition in rs6000-tdep.c. Fri Feb 4 01:14:20 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dwarfread.c (process_dies): Skip nested TAG_compile_unit DIEs. * dwarfread.c (add_partial_symbol): Do not enter opaque aggregate definitions into the psymtab. Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * m68k-stub.c: Treat mc68332 like mc68020 most places. Provide a special exceptionSize for the 68332. * remote-udi.c (udi_attach): If no arguments, print error. Thu Feb 3 17:34:05 1994 Fred Fish (fnf@cygnus.com) * Makefile.in (VERSION): Bump to 4.12.1 * NEWS, README: Update to match 4.12 release. Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * command.c (empty_sfunc): New function. (add_set_cmd): Use it instead of not_just_help_class_command. (not_just_help_class_command): Change calling convention back to what it was before yesterday's change. * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end of the type if present. Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * printcmd.c (decode_format): Don't blithely set the size for an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT. * defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h. If BFD64, make a LONGEST a BFD_HOST_64_BIT. * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead always just check against INT_MIN and INT_MAX (this also fixes things if sizeof (long) > sizeof (int), e.g. Alpha). * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h: Don't define LONGEST or BUILTIN_TYPE_LONGEST. * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and BUILTIN_TYPE_UNSIGNED_LONGEST. * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove longest_int and longest_unsigned_int. * value.h (struct value): Just align to LONGEST, rather than worrying about CC_HAS_LONG_LONG. * valarith.c (value_binop): Figure out type ourself based on sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST. The point is that we don't depend on CC_HAS_LONG_LONG anymore. * valprint.c (val_print_type_code_int): Just call extract_unsigned_integer directly, rather than going through unpack_long. * printcmd.c (decode_format): Remove code which would sometimes change 'g' size to 'w' for integers. print_scalar_formatted handles printing huge integers well enough, thank you. * command.c (add_set_cmd, not_just_help_class_command): Change to make this the sfunc, not cfunc, since that is how we call it. * command.h: Comment difference between sfunc and cfunc. * demangle.c (set_demangling_command): Add third arg since that is how it is called. (_initialize_demangler): Use sfunc, not cfunc, for set_demangling_command, since that is how it is called. Remove show_demangling_command; it has no effect. * command.c (shell_escape): Report errors correctly (with error message from strerror). Wed Feb 2 14:35:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use x_scnlen.l rather than x_scnlen to match corresponding change in coff/internal.h. Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * gdbtypes.h, ch-typeprint.c, ch-valprint.c: Change comments regarding TYPE_CODE_BOOL. * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL, regardless of the language. (value_true): Just call value_logical_not regardless of language. * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type): Remove #if 0'd code which makes some enums TYPE_CODE_BOOL. * language.h: Improve comment for la_builtin_type_vector. * m2-lang.c (_initialize_m2_language): Don't add any fields to builtin_type_m2_bool. Tue Feb 1 17:13:32 1994 Kevin Buettner (kev@cujo.geg.mot.com) * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c: Define IN_SIGTRAMP and backtrace correctly through signal handlers. Tue Feb 1 22:13:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * procfs.c (wait_fd): Handle EINTR error return from PIOCWSTOP ioctl by restarting the ioctl. Tue Feb 1 16:16:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * target.h (target_wait): Add comment about calling return_to_top_level. Tue Feb 1 12:21:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes additional arguments. * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise. Mon Jan 31 16:10:41 1994 Stu Grossman (grossman at cygnus.com) * sparc-stub.c: Remove unnecessary #include of memory.h. Mon Jan 31 12:12:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * mips-tdep.c: Remove code which sets saved_regs from init_extra_frame_info and put it in new function mips_find_saved_regs. (READ_FRAME_REG): Remove macro and replace uses with the expansion. * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs, check if it is NULL and call mips_find_saved_regs if so. * remote-mips.c: Use unfiltered, not filtered, output most places. * blockframe.c (get_prev_frame_info): Detect and stop an infinite backtrace. Revise comments. Mon Jan 31 09:40:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mdebugread.c (parse_procedure): Remove _sigtramp kludges for alpha and irix. The _sigtramp case has to be handled properly in the tdep files if we have no ecoff debugging info. * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain), mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames without PC_REGNUM kludge. * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg): Clean up handling of mips sigtramp frames, improve comments. Sat Jan 29 23:25:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * paread.c (read_unwind_info): Fix typo. * paread.c (pa_symtab_read): Update the "check_strange_names" filter to match GCC's current output. Filter out section symbols (which the HP linker sometimes puts in the wrong place). Sat Jan 29 07:44:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * serial.h (SERIAL_SET_TTY_STATE): Comment return value. * Makefile.in (TAGS): Just echo one line, rather than the whole thing. * Makefile.in: Remove all references to sparcly-nat.c. * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h remote-sim.h directly, rather than via $(remote_utils_h). This avoids duplicating serial.h and target.h. * Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables are not used anywhere (a 5 Oct 1993 change removed the uses). * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o. * config/m68k/es1800.mt: Add comment. * remote-es.c: Extensive changes to update to current conventions. * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]: If the timeout is too big to fit in c_cc[VTIME], then do multiple reads to achieve the desired timeout. * serial.h (serial_t): Add field timeout_remaining. Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * c-exp.y (yylex): Reenable nested type code. Fri Jan 28 15:40:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * a29k-tdep.c (examine_tag): Add comment regarding argcount. * remote-mips.c (mips_ops): Fix docstring. * remote-bug.c (bug_ops): Remove spurious newline from docstring. * config/m68k/tm-monitor.h: Changes to bring this into accordance with the old tm-m68k-em.h: (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove. (HAVE_68881): Don't undefine; HAVE_68881 is obsolete. (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine. Add FIXME regarding GET_LONGJMP_TARGET. * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments. * infptrace.c (kill_inferior): Add comments. * main.c (quit_command): Call target_close after we kill or detach. * remote-udi.c (udi_close): Don't error() if QUITTING. Fri Jan 28 11:55:52 1994 Rob Savoye (rob@darkstar.cygnus.com) * configure.in: Make m68k-coff and aout add monitor support in addition to the standard serial support. Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with index indexNil. Fri Jan 28 10:40:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS. * elfread.c (record_minimal_symbol_and_info), dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it. Thu Jan 27 15:12:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * i386-stub.c: Add ".text" right before "mem_fault:". * main.c (baud_rate): Add FIXME comment about printing -1 value. * remote-utils.c (usage): Fix message to be accurate and conform more closely to normal conventions. * remote-utils.c (gr_files_info): Have the exec_bfd test control whether to show information about exec_bfd, and not control whether to show information about device and speed. * remote-utils.c (gr_open): If sr_get_device returns NULL, give usage message, don't dump core. * remote-bug.c (bug_write_memory): Use alloca, not GCC extension for variable size array. (bug_fetch_register, bug_store_register): Rename "value" to "fpreg_buf" because some compilers don't like variables whose names are the same as types. (bug_store_register): Use a cast when converting char * to unsigned char *. * symmisc.c (maintenance_print_symbols): Don't refer to the name of the command in error message (the text was referring to the old name of the command). * symmisc.c (dump_symtab): Fix args to fprintf_filtered. * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print full details on structure elements without names. This partially reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect of those changes was accidental. * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is defined, make it an error to specify a single argument which is not a frame number. * Makefile.in (version.c), main.c (print_gdb_version): Use host_alias and target_alias, not host_canonical and target_canonical, to print configuration. Wed Jan 26 10:57:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead of builtin_type_long. It is necessary to get a type which is TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough. Fix many sins which will come up in 32 bit x 64 bit GDB, and various miscellaneous things discovered in the process: * printcmd.c, defs.h (print_address_numeric): New function. * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print) breakpoint.c (describe_other_breakpoints, breakpoint_1, mention), cp-valprint.c (cplus_print_value), infcmd.c (jump_command), printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c: Use it. * utils.c, defs.h (gdb_print_address): New function. * expprint (dump_expression), gdbtypes.h: Use it. * breakpoint.c (describe_other_breakpoints), symmisc.c (dump_symtab, print_symbol): Use filtered not unfiltered I/O. (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well just run gdb under a debugger for this (and it had problems with printing addresses, how to print b->shadow, etc.). * buildsym.c (make_blockvector), core.c (memory_error), exec.c (print_section_info), maint.c (print_section_table), mdebugread.c (parse_procedure), solib.c, source.c, symfile.c, symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c: Add comments saying code is broken. Marked with "FIXME-32x64". * dbxread.c (process_one_symbol), partial-stab.h (default), remote-vx.c (vx_run_files_info): Don't cast int being passed to local_hex_string. * symmisc.c (print_symbol): Don't cast long being passed to %lx. * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE only being a long. * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG and LOC_LOCAL. * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE. * source.c: Include regardless of USG. Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * valops.c (value_assign): Set `type' after coercing toval. * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print): Use extract_unsigned_integer to get the address of a reference. Tue Jan 25 11:31:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h: AIX can use ? instead of \ for continuation. Deal with it. * paread.c (read_unwind_info): Just assign to objfile->obj_private, not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which the HP compiler in ANSI mode doesn't like. * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it based on USG, rather than defining HAVE_SIGSETMASK to an expression containing defined. Having a macro used in #if expand to an expression containing "defined" is undefined according to ANSI, and the HP compiler in ANSI mode doesn't do what we wanted it to. Mon Jan 24 20:51:29 1994 John Gilmore (gnu@cygnus.com) * sparc-nat.c (fetch_inferior_registers, store_inferior_registers): Clean up the changes of 11 Jan, as recommended by Peter Schauer. Fri Jan 21 19:10:44 1994 Per Bothner (bothner@kalessin.cygnus.com) * ch-exp.y (match_string_literal): Allow a zero-length string. * ch-lang.c (chill_printstr): Don't print zero-length string funny. Sat Jan 22 17:08:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * i386aix-nat.c (i386_float_info): Reverse order of registers before passing them to print_387_status. (print_387_status): Don't subtract top from 7 before using it. * i387-tdep.c: Remove comment about AIX wanting "top" subtracted from 7; the above explains it. Sat Jan 22 20:25:11 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mips-tdep.c (init_extra_frame_info): Use frame relative stack pointer value when fixing up the frame at the start of a function. Sat Jan 22 12:29:13 1994 Stu Grossman (grossman at cygnus.com) * lynx-nat.c (fetch_core_registers): Load the I & L regs for the Sparc from the stack. Sat Jan 22 08:30:42 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * remote-mips.c (mips_initialize): Clear mips_initializing via cleanup chain, not directly. * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout of -1 mean forever, like in the HAVE_SGTTY case. Warn if we are munging the timeout due to the limited range of c_cc[VTIME]. * fork-child.c, inferior.h (fork_inferior): New argument shell_file. * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior), m3-nat.c (m3_create_inferior): Pass it. * procfs.c: Remove ptrace function. It was declared in a way which conflicted with the prototype in unistd.h on Solaris. Sat Jan 22 01:37:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * sparc-tdep.c (frame_saved_pc): Get the pc from the saved pc in the sigcontext if it is a signal trampoline frame. * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET): Define for Solaris2. Sat Jan 22 00:34:47 1994 Stu Grossman (grossman at cygnus.com) * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h, config/sparc/tm-sparclynx.h: Move defs of FRAME_SAVED_I0/L0 to tm-sparc.h so they can be overridden if necessary. Fri Jan 21 17:49:28 1994 Stu Grossman (grossman at cygnus.com) * lynx-nat.c: Add Sparc support. * sparcly-nat.c: Remove. It's useless. * config/sparc/nm-sparclynx.h: Rewrite. * config/sparc/sparclynx.mh (NATDEPFILES): Replace sparcly-nat.o with lynx-nat.o * config/sparc/tm-sparclynx.h: Rewrite. Fri Jan 21 19:08:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * rs6000-pinsn.c: Use the new disassembler in the opcodes directory. Old code was discarded, since the new opcode table has a different format. Fri Jan 21 14:28:30 1994 Fred Fish (fnf@cygnus.com) * Makefile.in (realclean): Remove info files per make-stds.texi. Fri Jan 21 12:47:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh if N_SO_ADDRESS_MAYBE_MISSING is defined. * config/sparc/tm-sun4sol2.h: Define it. Thu Jan 20 15:04:24 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * printcmd.c (print_address_symbolic): Unconditionally use msymbol if we did not find a symbol. Fri Jan 21 08:20:18 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY is not defined. * hppab-nat.c (call_ptrace): Delete redundant function. (kill_inferior, attach, detach, child_resume): Likewise. (child_xfer_memory): Likewise. * hppah-nat.c (call_ptrace): Delete redundant function. (kill_inferior, attach, detach, child_resume): Likewise. * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o. * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o. * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define. * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define. (CHILD_XFER_MEMORY): Define. (PT_*): Define so that generic infptrace.c code can be used. Fri Jan 21 09:23:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (xcoff_symfile_read): Make second parameter a struct section_offsets *, not a (nonexistent) struct section_offset *. * xcoffread.c (read_xcoff_symtab): Make main_aux just a union internal_xcoff_symtab, not an array of one of them. Change lots of "main_aux" to "&main_aux" and so on. * coffread.c, xcoffread.c: Include before "symfile.h". Thu Jan 20 17:30:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * coffread.c (coff_getfilename): Make it not static. * xcoffread.c (read_xcoff_symtab): complain() not abort(). * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes a completely gratuitous difference between xcoffread.c and coffread.c). Wed Jan 19 15:09:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * infrun.c (wait_for_inferior): Don't set frame for step_resume_breakpoint for IN_SIGTRAMP cases. * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what), breakpoint.c (bpstat_what): Move step_resume from its own field of the struct bpstat_what into the main_action. Make it override other breakpoints. This is a conservative change in the sense that before the step resume breakpoint was a breakpoint.c breakpoint, hitting the step resume breakpoint overrode even calling bpstat_stop_status. Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * infrun.c (normal_stop): Set stop_pc after popping the dummy frame in case execution was stopped in the called function. * stack.c (print_frame_info, frame_info): If backtracing through a call dummy, handle the starting source line number on a line boundary like backtracing through sigtramp. * sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address for call dummy frame right. Remove old test for dummy frame, it has been unused at least since gdb-3.5. * sparc-tdep.c (sparc_push_dummy_frame): Set return address register of the dummy frame. Tue Jan 18 16:16:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * infcmd.c (signal_command): Accept 0 as legitimate signal number. Tue Jan 18 14:09:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * infrun.c (signals_info), target.c (target_signal_from_name): Use ugly casts to avoid enumvar < enumvar or enumvar++. Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON. * inflow.c (terminal_ours_1): When discussing how to deal with the tty state, make note of query() as well as readline. * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of signals for which stop and print are cleared by default. Mon Jan 17 20:00:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * config/pa/tm-hppa.h (unwind_table_entry): Use one of the reserved fields to hold a stub unwind entry type. Fix typo. (stub_unwind_entry): New structure for raw stub unwind entries. (stub_unwind_types): The types of stubs we may encounter. (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines. * hppa-tdep.c (rp_saved): Use additional information provided by linker stub unwind descriptors. (frameless_function_invocation): Likewise. (frame_chain_valid): Likewise. * paread.c (compare_unwind_entries): New function for sorting unwind table entries. (read_unwind_info): Rewrite to remove dependency on host endianness. Read in data from the $UNWIND_END$ subspace which contains linker stub unwind descriptors. Merge that data into the basic unwind table. * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions. Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name from either the symbol name or the auxent. * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename, no longer static. Mon Jan 17 13:35:01 1994 Fred Fish (fnf@cygnus.com) * Makefile.in (ALLPARAM): Change irix5.h to nm-irix5.h. Mon Jan 17 12:35:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * README: Update notes for alpha port. Mon Jan 17 11:15:57 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL for operation fault, constraint fault, and type fault. Sun Jan 16 12:46:01 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (init.c): Add comment explaining formatting conventions. * c-exp.y (parse_number): Assign to temporary between the right shifts, to work around a bug in the SCO compiler. * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR): Add various files which were added to GDB recently. * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not within_function. * Makefile.in: Add mostlyclean target. Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Version 4.11.4. Sat Jan 15 18:27:34 1994 Per Bothner (bothner@kalessin.cygnus.com) * main.c (show_commands): Make return type of extern history_get be HIST_ENTRY, rather than struct _hist_entry. (The latter loses with the upcoming merged readline.) Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring const char *, not char *. * symtab.h (struct symbol): Make section short, not unsigned short. * symtab.c (lookup_symbol): Add comment about QUIT here. * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered. * c-exp.y (parse_number): Check for overflow regardless of range checking. Fix overflow check to use unsigned LONGEST, not unsigned int. * c-exp.y (parse_number): Make it so that integer constants are builtin_type_long_long if builtin_type_long isn't big enough or if an "LL" suffix is used. Properly handle "UL" or "LU" suffixes. * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC): Print our "()" first, then recurse for the target type. Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * remote-udi.c (udi_create_inferior): Quote empty execfile argument. * gdbserver/low-lynx.c: Include not "/usr/include/wait.h". Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * utils.c (request_quit): Re-establish signal handler regardless of USG. * config/mips/xm-irix4.h: Define HAVE_TERMIOS. Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * i960-tdep.c: Include target.h. Fri Jan 14 17:12:28 1994 Stan Shebs (shebs@andros.cygnus.com) * lynx-nat.c (sys/wait.h): Don't use absolute pathname. Fri Jan 14 11:06:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus changes (status -> ourstatus; declare status, etc.). * config/nm-lynx.h: Fix child_wait prototype and include target.h. Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (ALLPARAM): Add config/nm-lynx.h. Fri Jan 14 11:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * remote-mips.c (mips_request, mips_wait): Correct prototypes. Fri Jan 14 11:37:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config/i386/xm-linux.h: Define HAVE_TERMIOS. Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/alpha/tm-alpha.h (CALL_DUMMY): Improve comment. Thu Jan 13 10:32:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960 is defined. Otherwise just report TARGET_SIGNAL_UNKNOWN. * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before writing it. Add search to target vector (#if 0'd until after 4.12): * target.h (to_search, target_search): Add. * gdbcore.h, core.c (generic_search): Add. * remote.c (remote_search): Add. * a29k-tdep.c (init_frame_info): Use target_search to find traceback tag. * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr is on, call find_pc_function rather than relying just on the minimal symbols (probably only matters for symbol readers which don't put statics in the minimal symbols, but changing this strikes me as not conservative enough). Initialize name_location in all cases. If no symbol and no msymbol, don't print anything symbolic. * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0. Wed Jan 12 20:53:16 1994 John Gilmore (gnu@cygnus.com) * printcmd.c (print_address_symbolic): Make it search the symtabs for variables as well as functions. Add `set print fast-symbolic-addr' and default it to fast (the old way). Print line numbers for data items as well as functions. * symtab.c (find_addr_symbol): Return the symtab and the symbol address, if a symbol is found (take two more args pointing to where to store these results). * symtab.h (find_addr_symbol): Add prototype. Wed Jan 12 19:32:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * objfiles.h: Fix comments to reflect the fact that the phrase "top of stack" always refers to where the pushing and popping takes place, regardless of whether it is at the highest or lowest address. Wed Jan 12 13:23:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mdebugread.c (parse_symbol): Do not set TYPE_TAG_NAME for compiler generated tag names. * mdebugread.c (parse_type): Handle cross references to qualified aggregate types. * valops.c (value_struct_elt): Improve error message if the address of a method is requested from an object instance. * valops.c (search_struct_method): Make name_matched non-static to get it initialized correctly. * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER): Define to exclude segment register which are not writable on newer SCO versions. Wed Jan 12 14:44:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * go32-xdep.c: Remove unused function uerror. (sigsetmask): Declare return type. Declare argument (to match the way it is called). Explicitly return 0. Wed Jan 12 01:44:25 1994 John Gilmore (gnu@cygnus.com) * symtab.h (struct symbol, general_symbol_info, minimal_symbol, partial_symbol): Shrink the storage sizes of symbols, by making enums into 1-byte bitfields when compiled __GNUC__, moving all the enums and small ints to the end of each struct to improve alignment, and switching the section number from int to unsigned short. Wed Jan 12 00:16:26 1994 John Gilmore (gnu@cygnus.com) * symtab.c (find_addr_symbol): New routine that will find the nearest symbol associated with an address. It does so by exhaustive search of the symtabs, so it's slow but complete. Tue Jan 11 23:57:30 1994 John Gilmore (gnu@cygnus.com) * coffread.c (read_coff_symtab): Set PC bounds of _globals_ symtab to [0,0] rather than [0, end of first source file]. This avoids problems with other parts of GDB looking for linetables in the _globals_ symtab. Eliminate variables num_object_files and first_object_file_end. Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com) * a29k-tdep.c (init_frame_info): Cast null arg to examine_tag. (pop_frame): Restore PC2 and LR0 from dummy frames. (push_dummy_frame): Save PC2 and LR0 into dummy frames. (setup_arbitrary_frame): Handle 3 args and set up real frames. * config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments. (DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0. (SETUP_ARBITRARY_FRAME): Define. Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START. Tue Jan 11 14:27:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * remote-udi.c (udi_resume): Correct prototype. Tue Jan 11 11:10:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call hppa_frame_find_saved_regs. * hppa-tdep.c (dig_fp_from_stack): Delete function. (prologue_inst_adjust_sp): New function. (is_branch, inst_saves_gr, inst_saves_fr): New functions. (skip_prologue): Completely rewrite to use unwind information. (hppa_frame_find_saved_regs): Likewise. Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol to convert a signal number with appropriate bounds checking. * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377). Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com) * stack.c (frame_info): If FRAME_FIND_SAVED_REGS isn't defined, print a newline to end the display anyway. * sparc-tdep.c (sparc_pop_frame): Pop the fsr and csr (float and coprocessor status regs) when popping a frame. This fixes float exceptions that occur after calling inferior functions. * sparc-nat.c (fetch_inferior_registers, store_inferior_registers): Read and write the fsr (float status register) to/from the child process along with the float regs. Remove Peter Schauer's change of May 24 '93, which has higher overhead and doesn't solve the real problem (which was that FSR wasn't being set). Mon Jan 10 23:16:42 1994 John Gilmore (gnu@cygnus.com) * a29k-tdep.c (examine_prologue): Don't worry if the ASGEQ stack overflow check isn't right after the register stack adjustment instruction. Metaware R2.3u compiler moves other things in front of it. This fix isn't perfect but is what's running. Mon Jan 10 20:08:23 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT. * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14 character filenames. * configure.in: Change accordingly. Mon Jan 10 15:48:36 1994 Tom Lord (lord@rtl.cygnus.com) * m68k-stub.c, sparc-stub.c: removed spurious introduction of _filtered io routines from these two files. Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h, config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define. * mdebugread.c (parse_symbol): Handle enum sh.type produced by DEC c89. * mdebugread.c (add_line): Handle zero linenos produced by DEC c89. Fri Jan 7 12:55:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before printing to gdb_stderr. * remote-udi.c (udi_kill): Don't close the connection, just set inferior_pid to zero. (udi_mourn): Call remove_breakpoints. * remote-udi.c: Remove obsolete need_artificial_traps comment. * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc. Thu Jan 6 07:17:53 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * symtab.c (lookup_symbol): Don't try adding .c to the name. * remote-bug.c: At the start of each section, reset srec_frame back to 160. * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS. * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook. * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with code which looks for those two waitkinds. Use switch statement. * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with CHILD_SPECIAL_WAITSTATUS. * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes. * Move target_signal_from_host, target_signal_to_host, and store_waitstatus from inftarg.c to target.c. procfs needs them. * target.c: Include "wait.h" and . * target.h, infrun.c (proceed), proceed callers: Pass new code TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with enums being treated as unsigned and is cleaner. * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or TARGET_SIGNAL_0. * infcmd.c (signal_command), infrun.c (signals_info): Don't allow user to specify numeric equivalent of TARGET_SIGNAL_DEFAULT. Tue Jan 4 15:34:36 1994 Stu Grossman (grossman@cygnus.com) * config/alpha/alpha-netware.mt: New target support for Alpha running Netware. * configure.in: Add alpha-*-netware* target. Tue Jan 4 14:51:35 1994 Stan Shebs (shebs@andros.cygnus.com) * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED. Tue Jan 4 09:47:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * target.h: Add enum target_waitkind, enum target_signal, and struct target_waitstatus. Change status argument to target_wait to be struct target_waitstatus * instead of int *. * target.h, infrun.c, all targets: Change type of signal arguments to resume(), proceed(), and target_resume() from int to enum target_signal. * All targets (*_wait, *_resume): Change accordingly. * infcmd.c (program_info, signal_command), throughout infrun.c, * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff. * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex signal code stuff right with the new signals would be non-trivial). * inferior.h (stop_signal): Make it enum target_signal not int. * target.c, target.h (target_signal_to_string, target_signal_to_name, target_signal_from_name): New functions. * inftarg.c, target.h (target_signal_to_host, target_signal_from_host, store_waitstatus): New functions. * procfs.c (procfs_notice_signals): Use them. * i960-tdep.c (i960_fault_to_signal): New function, to replace print_fault. * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL. * objfiles.c (build_objfile_section_table): Don't abort() if objfile->sections is already set. * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD to match recent change to exec.c. * Version 4.11.3. * main.c (print_gdb_version): Change year to 1994. * ChangeLog, ChangeLog-93: Split ChangeLog at 1994. * Makefile.in (NONSRC): Add ChangeLog-93. Mon Jan 3 11:57:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * stabsread.c (read_type): Allow defining several type numbers at once (e.g. "(1,2)=(3,4)="...). * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int). * breakpoint.c (frame_in_dummy): Check PC as well as frame. Mon Jan 3 02:47:03 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mdebugread.c (psymtab_to_symtab_1): Only pass N_STAB symbols to process_one_symbol. * symtab.c (find_pc_psymbol): Search global_psymbols as well to avoid caching a bad endaddr in find_pc_partial_function. Sun Jan 2 21:41:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION. Sat Jan 1 04:35:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * infrun.c (wait_for_inferior): Do not step or step resume past the end of a one-line function we just stepped into. For older changes see ChangeLog-93 Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: