\input texinfo @c -*-texinfo-*- @comment cvs.texinfo,v 1.3 1994/09/15 23:39:26 zoo Exp @comment Documentation for CVS. @comment Copyright (C) 1992, 1993 Signum Support AB @comment Copyright (C) 1993 Free Software Foundation, Inc. @comment This file is part of the CVS distribution. @comment CVS is free software; you can redistribute it and/or modify @comment it under the terms of the GNU General Public License as published by @comment the Free Software Foundation; either version 1, or (at your option) @comment any later version. @comment CVS is distributed in the hope that it will be useful, @comment but WITHOUT ANY WARRANTY; without even the implied warranty of @comment MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the @comment GNU General Public License for more details. @comment You should have received a copy of the GNU General Public License @comment along with CVS; see the file COPYING. If not, write to @comment the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. @afourpaper @setfilename cvs.info @settitle CVS---Concurrent Versions System @setchapternewpage odd @c -- TODO list: @c -- Fix all lines that match "^@c -- " @c -- Document how CVS finds the binaries it executes. @c Things to include in the index: @c Finding RCS binaries @c Path to RCS binaries @c RCS, how CVS finds them @c s/RCS/diff/ @c -- More on binary files @ifinfo Copyright @copyright{} 1992, 1993 Signum Support AB Copyright @copyright{} 1993, 1994 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. @ignore Permission is granted to process this file through Tex and print the results, provided the printed document carries copying permission notice identical to this one except for the removal of this paragraph (this paragraph not being relevant to the printed manual). @end ignore Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the section entitled ``GNU General Public License'' is included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the section entitled ``GNU General Public License'' and this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English. @end ifinfo @comment The titlepage section does not appear in the Info file. @titlepage @sp 4 @comment The title is printed in a large font. @center @titlefont{Version Management} @sp @center @titlefont{with} @sp @center @titlefont{CVS} @sp 2 @center release 0.9, for @sc{cvs} 1.3+ @comment -release- @sp 3 @center Per Cederqvist @sp 3 @center last updated 2 Nov 1993 @comment -date- @comment The following two commands start the copyright page @comment for the printed manual. This will not appear in the Info file. @page @vskip 0pt plus 1filll Copyright @copyright{} 1992, 1993 Signum Support AB Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the section entitled ``GNU General Public License'' is included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the section entitled ``GNU General Public License'' and this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English. @end titlepage @comment ================================================================ @comment The real text starts here @comment ================================================================ @ifinfo @c --------------------------------------------------------------------- @node Top @top This info manual describes @sc{cvs} and is updated to release 1.4 or something similar. @end ifinfo @menu * Preface:: About this manual * What is CVS?:: What is CVS? * Basic concepts:: Basic concepts of revision management * A sample session:: A tour of basic CVS usage * Repository:: Where all your sources are stored * Starting a new project:: Starting a project with CVS * Multiple developers:: How CVS helps a group of developers * Branches:: Parallel development explained * Merging:: How to move changes between branches * Recursive behavior:: CVS descends directories * Adding files:: Adding files to a module * Removing files:: Removing files from a module * Tracking sources:: Tracking third-party sources * Moving files:: Moving and renaming files * Moving directories:: Moving and renaming directories * Keyword substitution:: CVS can include the revision inside the file * Revision management:: Policy questions for revision management * Invoking CVS:: Reference manual for CVS commands * Administrative files:: Reference manual for the Administrative files * Environment variables:: All environment variables which affect CVS * Troubleshooting:: Some tips when nothing works * Copying:: GNU GENERAL PUBLIC LICENSE * Index:: Index @end menu @c --------------------------------------------------------------------- @node Preface @unnumbered About this manual @cindex Preface @cindex About this manual Up to this point, one of the weakest parts of @sc{cvs} has been the documentation. @sc{cvs} is a complex program. Previous versions of the manual were written in the manual page format, which is not really well suited for such a complex program. When writing this manual, I had several goals in mind: @itemize @bullet @item No knowledge of @sc{rcs} should be necessary. @item No previous knowledge of revision control software should be necessary. All terms, such as @dfn{revision numbers}, @dfn{revision trees} and @dfn{merging} are explained as they are introduced. @item The manual should concentrate on the things @sc{cvs} users want to do, instead of what the @sc{cvs} commands can do. The first part of this manual leads you through things you might want to do while doing development, and introduces the relevant @sc{cvs} commands as they are needed. @item Information should be easy to find. In the reference manual in the appendices almost all information about every @sc{cvs} command is gathered together. There is also an extensive index, and a lot of cross references. @end itemize @cindex Signum Support @cindex Support, getting CVS support This manual was contributed by Signum Support AB in Sweden. Signum is yet another in the growing list of companies that support free software. You are free to copy both this manual and the @sc{cvs} program. @xref{Copying}, for the details. Signum Support offers @c -- Check this reference! It has been bogus in the past. support contracts and binary distribution for many programs, such as @sc{cvs}, @sc{gnu} Emacs, the @sc{gnu} C compiler and others. You can also buy hardcopies of this manual from us. Write to us for more information. @example Signum Support AB Box 2044 S-580 02 Linkoping Sweden Email: info@@signum.se Phone: +46 (0)13 - 21 46 00 Fax: +46 (0)13 - 21 47 00 @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @menu * Checklist:: * Credits:: * BUGS:: @end menu @node Checklist @unnumberedsec Checklist for the impatient reader @sc{cvs} is a complex system. You will need to read the manual to be able to use all of its capabilities. There are dangers that can easily be avoided if you know about them, and this manual tries to warn you about them. This checklist is intended to help you avoid the dangers without reading the entire manual. If you intend to read the entire manual you can skip this table. @table @asis @item Binary files @sc{cvs} can handle binary files, but you must have @sc{rcs} release 5.5 or later and a release of @sc{gnu} diff that supports the @samp{-a} flag (release 1.15 and later are OK). You must also configure both @sc{rcs} and @sc{cvs} to handle binary files when you install them. Keword substitution can be a source of trouble with binary files. @xref{Keyword substitution}, for solutions. @item The @code{admin} command Uncareful use of the @code{admin} command can cause @sc{cvs} to cease working. @xref{admin}, before trying to use it. @end table @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Credits @unnumberedsec Credits @cindex Contributors (manual) @cindex Credits (manual) Roland Pesch, Cygnus Support <@t{pesch@@cygnus.com}> wrote the manual pages which were distributed with @sc{cvs} 1.3. Appendix A and B contain much text that was extracted from them. He also read an early draft of this manual and contributed many ideas and corrections. The mailing-list @code{info-cvs} is sometimes informative. I have included information from postings made by the following persons: David G. Grubbs <@t{dgg@@think.com}>. Some text has been extracted from the man pages for @sc{rcs}. The @sc{cvs} @sc{faq} (@pxref{What is CVS?}) by David G. Grubbs has been used as a check-list to make sure that this manual is as complete as possible. (This manual does however not include all of the material in the @sc{faq}). The @sc{faq} contains a lot of useful information. In addition, the following persons have helped by telling me about mistakes I've made: Roxanne Brunskill <@t{rbrunski@@datap.ca}>, Kathy Dyer <@t{dyer@@phoenix.ocf.llnl.gov}>, Karl Pingle <@t{pingle@@acuson.com}>, Thomas A Peterson <@t{tap@@src.honeywell.com}>, Inge Wallin <@t{ingwa@@signum.se}>, Dirk Koschuetzki <@t{koschuet@@fmi.uni-passau.de}> and Michael Brown <@t{brown@@wi.extrel.com}>. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node BUGS @unnumberedsec BUGS @cindex Bugs, known in this manual @cindex Known bugs in this manual This manual is still very new. Here is a list of known deficiencies in it: @itemize @bullet @item In the examples, the output from @sc{cvs} is sometimes displayed, sometimes not. @item The input that you are supposed to type in the examples should have a different font than the output from the computer. @item This manual should be clearer about what file permissions you should set up in the repository, and about setuid/setgid. @item Some of the chapters are not yet complete. They are noted by comments in the @file{cvs.texinfo} file. @item @cindex Reporting bugs (manual) @cindex Bugs, reporting (manual) @cindex Errors, reporting (manual) This list is not complete. If you notice any error, omission, or something that is unclear, please send mail to @t{ceder@@signum.se}. @end itemize I hope that you will find this manual useful, despite the above-mentioned shortcomings. @flushright Linkoping, October 1993 Per Cederqvist @end flushright @c --------------------------------------------------------------------- @node What is CVS? @chapter What is CVS? @cindex What is CVS? @cindex Introduction to CVS @cindex CVS, introduction to @sc{cvs} is a version control system. Using it, you can record the history of your source files. @c -- /// @c -- ///Those who cannot remember the past are condemned to repeat it. @c -- /// -- George Santayana @c -- ////// @c -- Insert history quote here! For example, bugs sometimes creep in when software is modified, and you might not detect the bug until a long time after you make the modification. With @sc{cvs}, you can easily retrieve old versions to see exactly which change caused the bug. This can sometimes be a big help. You could of course save every version of every file you have ever created. This would however waste an enormous amount of disk space. @sc{cvs} stores all the versions of a file in a single file in a clever way that only stores the differences between versions. @sc{cvs} also helps you if you are part of a group of people working on the same project. It is all too easy to overwrite each others' changes unless you are extremely careful. Some editors, like @sc{gnu} Emacs, try to make sure that the same file is never modified by two people at the same time. Unfortunately, if someone is using another editor, that safeguard will not work. @sc{cvs} solves this problem by insulating the different developers from each other. Every developer works in his own directory, and @sc{cvs} merges the work when each developer is done. @cindex History of CVS @cindex CVS, history of @cindex Credits (CVS program) @cindex Contributors (CVS program) @sc{cvs} started out as a bunch of shell scripts written by Dick Grune, posted to @code{comp.sources.unix} in the volume 6 release of December, 1986. While no actual code from these shell scripts is present in the current version of @sc{cvs} much of the @sc{cvs} conflict resolution algorithms come from them. In April, 1989, Brian Berliner designed and coded @sc{cvs}. Jeff Polk later helped Brian with the design of the @sc{cvs} module and vendor branch support. @cindex Source, getting CVS source You can get @sc{cvs} via anonymous ftp from a number of sites, for instance @t{prep.ai.mit.edu} in @file{pub/gnu}. @cindex Mailing list @cindex List, mailing list There is a mailing list for @sc{cvs} where bug reports can be sent, questions can be asked, an FAQ is posted, and discussion about future enhancements to @sc{cvs} take place. To submit a message to the list, write to <@t{info-cvs@@prep.ai.mit.edu}>. To subscribe or unsubscribe, write to <@t{info-cvs-request@@prep.ai.mit.edu}>. Please be specific about your email address. Work is in progress on creating a newsgroup for @sc{cvs}-related topics. It will appear somewhere under the @samp{gnu.} hierarchy. Gateways to and from the mailing list will be set up. @c -- Newsgroup? gnu.cvs.info? @cindex FTP site @cindex Patches to CVS @cindex CVS FTP site @cindex Fixes to CVS @cindex FAQ @cindex CVS FAQ The @sc{ftp} site @t{think.com} has some @sc{cvs} material in the @file{/pub/cvs} subdirectory. Currently (late summer 1993) it contains an excellent @sc{faq} (Frequently Asked Questions, with answers), and an improved (but unofficial) version of @sc{cvs}. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @unnumberedsec CVS is not@dots{} @sc{cvs} can do a lot of things for you, but it does not try to be everything for everyone. @table @asis @item @sc{cvs} is not a build system. Though the structure of your repository and modules file interact with your build system (e.g. @file{Makefile}s), they are essentially independent. @sc{cvs} does not dictate how you build anything. It merely stores files for retrieval in a tree structure you devise. @sc{cvs} does not dictate how to use disk space in the checked out working directories. If you write your @file{Makefile}s or scripts in every directory so they have to know the relative positions of everything else, you wind up requiring the entire repository to be checked out. That's simply bad planning. If you modularize your work, and construct a build system that will share files (via links, mounts, @code{VPATH} in @file{Makefile}s, etc.), you can arrange your disk usage however you like. But you have to remember that @emph{any} such system is a lot of work to construct and maintain. @sc{cvs} does not address the issues involved. You must use your brain and a collection of other tools to provide a build scheme to match your plans. Of course, you should place the tools created to support such a build system (scripts, @file{Makefile}s, etc) under @sc{cvs}. @item @sc{cvs} is not a substitute for management. Your managers and project leaders are expected to talk to you frequently enough to make certain you are aware of schedules, merge points, branch names and release dates. If they don't, @sc{cvs} can't help. @sc{cvs} is an instrument for making sources dance to your tune. But you are the piper and the composer. No instrument plays itself or writes its own music. @item @sc{cvs} is not a substitute for developer communication. When faced with conflicts within a single file, most developers manage to resolve them without too much effort. But a more general definition of ``conflict'' includes problems too difficult to solve without communication between developers. @sc{cvs} cannot determine when simultaneous changes within a single file, or across a whole collection of files, will logically conflict with one another. Its concept of a @dfn{conflict} is purely textual, arising when two changes to the same base file are near enough to spook the merge (i.e. @code{diff3}) command. @sc{cvs} does not claim to help at all in figuring out non-textual or distributed conflicts in program logic. For example: Say you change the arguments to function @code{X} defined in file @file{A}. At the same time, someone edits file @file{B}, adding new calls to function @code{X} using the old arguments. You are outside the realm of @sc{cvs}'s competence. Acquire the habit of reading specs and talking to your peers. @item @sc{cvs} is not a configuration management system. @sc{cvs} is a source control system. The phrase ``configuration management'' is a marketing term, not an industry-recognized set of functions. A true ``configuration management system'' would contain elements of the following: @itemize @bullet @item Source control. @item Dependency tracking. @item Build systems (i.e. What to build and how to find things during a build. What is shared? What is local?) @item Bug tracking. @item Automated Testing procedures. @item Release Engineering documentation and procedures. @item Tape Construction. @item Customer Installation. @item A way for users to run different versions of the same software on the same host at the same time. @end itemize @sc{cvs} provides only the first. @end table This section is taken from release 2.3 of the @sc{cvs} @sc{faq}. @c --------------------------------------------------------------------- @node Basic concepts @chapter Basic concepts @cindex Modules (intro) @cindex Repository (intro) @sc{cvs} stores all files in a centralized @dfn{repository}: a directory (such as @file{/usr/local/cvsroot} or @file{user@@remotehost:/usr/local/cvsroot}) which is populated with a hierarchy of files and directories. (@pxref{Remote repositories} for information about keeping the repository on a remote machine.) Normally, you never access any of the files in the repository directly. Instead, you use @sc{cvs} commands to get your own copy of the files, and then work on that copy. When you've finished a set of changes, you check (or @dfn{commit}) them back into the repository. The files in the repository are organized in @dfn{modules}. Each module is made up of one or more files, and can include files from several directories. A typical usage is to define one module per project. @menu * Revision numbers:: The meaning of a revision number * Versions revisions releases:: Terminology used in this manual @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Revision numbers @section Revision numbers @cindex Revision numbers @cindex Revision tree @cindex Linear development @cindex Number, revision- @cindex Decimal revision number @cindex Main trunk (intro) @cindex Branch number @cindex Number, branch Each version of a file has a unique @dfn{revision number}. Revision numbers look like @samp{1.1}, @samp{1.2}, @samp{1.3.2.2} or even @samp{1.3.2.2.4.5}. A revision number always has an even number of period-separated decimal integers. By default revision 1.1 is the first revision of a file. Each successive revision is given a new number by increasing the rightmost number by one. The following figure displays a few revisions, with newer revisions to the right. @example +-----+ +-----+ +-----+ +-----+ +-----+ ! 1.1 !----! 1.2 !----! 1.3 !----! 1.4 !----! 1.5 ! +-----+ +-----+ +-----+ +-----+ +-----+ @end example @sc{cvs} is not limited to linear development. The @dfn{revision tree} can be split into @dfn{branches}, where each branch is a self-maintained line of development. Changes made on one branch can easily be moved back to the main trunk. Each branch has a @dfn{branch number}, consisting of an odd number of period-separated decimal integers. The branch number is created by appending an integer to the revision number where the corresponding branch forked off. Having branch numbers allows more than one branch to be forked off from a certain revision. @need 3500 All revisions on a branch have revision numbers formed by appending an ordinal number to the branch number. The following figure illustrates branching with an example. @example @group +-------------+ Branch 1.2.2.3.2 -> ! 1.2.2.3.2.1 ! / +-------------+ / / +---------+ +---------+ +---------+ +---------+ Branch 1.2.2 -> _! 1.2.2.1 !----! 1.2.2.2 !----! 1.2.2.3 !----! 1.2.2.4 ! / +---------+ +---------+ +---------+ +---------+ / / +-----+ +-----+ +-----+ +-----+ +-----+ ! 1.1 !----! 1.2 !----! 1.3 !----! 1.4 !----! 1.5 ! <- The main trunk +-----+ +-----+ +-----+ +-----+ +-----+ ! ! ! +---------+ +---------+ +---------+ Branch 1.2.4 -> +---! 1.2.4.1 !----! 1.2.4.2 !----! 1.2.4.3 ! +---------+ +---------+ +---------+ @end group @end example @c -- However, at least for me the figure is not enough. I suggest more @c -- text to accompany it. "A picture is worth a thousand words", so you @c -- have to make sure the reader notices the couple of hundred words @c -- *you* had in mind more than the others! @c -- Why an even number of segments? This section implies that this is @c -- how the main trunk is distinguished from branch roots, but you never @c -- explicitly say that this is the purpose of the [by itself rather @c -- surprising] restriction to an even number of segments. The exact details of how the branch number is constructed is not something you normally need to be concerned about, but here is how it works: When @sc{cvs} creates a branch number it picks the first unused even integer, starting with 2. So when you want to create a branch from revision 6.4 it will be numbered 6.4.2. All branch numbers ending in a zero (such as 6.4.0) are used internally by @sc{cvs} (@pxref{Magic branch numbers}). The branch 1.1.1 has a special meaning. @xref{Tracking sources}. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Versions revisions releases @section Versions, revisions and releases @cindex Revisions, versions and releases @cindex Versions, revisions and releases @cindex Releases, revisions and versions A file can have several versions, as described above. Likewise, a software product can have several versions. A software product is often given a version number such as @samp{4.1.1}. Versions in the first sense are called @dfn{revisions} in this document, and versions in the second sense are called @dfn{releases}. To avoid confusion, the word @dfn{version} is almost never used in this document. @c --------------------------------------------------------------------- @node A sample session @chapter A sample session @cindex A sample session @cindex Example of a work-session @cindex Getting started @cindex Work-session, example of @cindex tc, Trivial Compiler (example) @cindex Trivial Compiler (example) This section describes a typical work-session using @sc{cvs}. It assumes that a repository is set up (@pxref{Repository}). Suppose you are working on a simple compiler. The source consists of a handful of C files and a @file{Makefile}. The compiler is called @samp{tc} (Trivial Compiler), and the repository is set up so that there is a module called @samp{tc}. @menu * Getting the source:: Creating a workspace * Committing your changes:: Making your work available to others * Cleaning up:: Cleaning up * Viewing differences:: Viewing differences @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Getting the source @section Getting the source @cindex Getting the source @cindex Checking out source @cindex Fetching source @cindex Source, getting from CVS @cindex Checkout, example The first thing you must do is to get your own working copy of the source for @samp{tc}. For this, you use the @code{checkout} command: @example $ cvs checkout tc @end example @noindent This will create a new directory called @file{tc} and populate it with the source files. @example $ cd tc $ ls tc CVS Makefile backend.c driver.c frontend.c parser.c @end example The @file{CVS} directory is used internally by @sc{cvs}. Normally, you should not modify or remove any of the files in it. You start your favorite editor, hack away at @file{backend.c}, and a couple of hours later you have added an optimization pass to the compiler. A note to @sc{rcs} and @sc{sccs} users: There is no need to lock the files that you want to edit. @xref{Multiple developers} for an explanation. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Committing your changes @section Committing your changes @cindex Committing changes @cindex Log message entry @cindex CVSEDITOR, environment variable @cindex EDITOR, environment variable When you have checked that the compiler is still compilable you decide to make a new version of @file{backend.c}. @example $ cvs commit backend.c @end example @noindent @sc{cvs} starts an editor, to allow you to enter a log message. You type in ``Added an optimization pass.'', save the temporary file, and exit the editor. The environment variable @code{$CVSEDITOR} determines which editor is started. If @code{$CVSEDITOR} is not set, then if the environment variable @code{$EDITOR} is set, it will be used. If both @code{$CVSEDITOR} and @code{$EDITOR} are not set then the editor defaults to @code{vi}. If you want to avoid the overhead of starting an editor you can specify the log message on the command line using the @samp{-m} flag instead, like this: @example $ cvs commit -m "Added an optimization pass" backend.c @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Cleaning up @section Cleaning up @cindex Cleaning up @cindex Working copy, removing @cindex Removing your working copy @cindex Releasing your working copy Before you turn to other tasks you decide to remove your working copy of tc. One acceptable way to do that is of course @example $ cd .. $ rm -r tc @end example @noindent but a better way is to use the @code{release} command (@pxref{release}): @example $ cd .. $ cvs release -d tc M driver.c ? tc You have [1] altered files in this repository. Are you sure you want to release (and delete) module `tc': n ** `release' aborted by user choice. @end example The @code{release} command checks that all your modifications have been committed. If history logging is enabled it also makes a note in the history file. @xref{history file}. When you use the @samp{-d} flag with @code{release}, it also removes your working copy. In the example above, the @code{release} command wrote a couple of lines of output. @samp{? tc} means that the file @file{tc} is unknown to @sc{cvs}. That is nothing to worry about: @file{tc} is the executable compiler, and it should not be stored in the repository. @xref{cvsignore}, for information about how to make that warning go away. @xref{release output}, for a complete explanation of all possible output from @code{release}. @samp{M driver.c} is more serious. It means that the file @file{driver.c} has been modified since it was checked out. The @code{release} command always finishes by telling you how many modified files you have in your working copy of the sources, and then asks you for confirmation before deleting any files or making any note in the history file. You decide to play it safe and answer @kbd{n @key{RET}} when @code{release} asks for confirmation. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Viewing differences @section Viewing differences @cindex Viewing differences @cindex Diff You do not remember modifying @file{driver.c}, so you want to see what has happened to that file. @example $ cd tc $ cvs diff driver.c @end example This command runs @code{diff} to compare the version of @file{driver.c} that you checked out with your working copy. When you see the output you remember that you added a command line option that enabled the optimization pass. You check it in, and release the module. @example $ cvs commit -m "Added an optimization pass" driver.c Checking in driver.c; /usr/local/cvsroot/tc/driver.c,v <-- driver.c new revision: 1.2; previous revision: 1.1 done $ cd .. $ cvs release -d tc ? tc You have [0] altered files in this repository. Are you sure you want to release (and delete) module `tc': y @end example @c --------------------------------------------------------------------- @node Repository @chapter The Repository @cindex Repository, example @cindex Layout of repository @cindex Typical repository @cindex CVSROOT, environment variable @cindex .profile @cindex .cshrc @cindex .tcshrc @cindex .bashrc @cindex /usr/local/cvsroot @cindex cvsroot Figure 3 below shows a typical setup of a repository. Only directories are shown below. @example @t{/usr} | +--@t{local} | | | +--@t{cvsroot} | | | | | +--@t{CVSROOT} | (administrative files) | +--@t{gnu} | | | +--@t{diff} | | (source code to @sc{gnu} diff) | | | +--@t{rcs} | | (source code to @sc{rcs}) | | | +--@t{cvs} | (source code to @sc{cvs}) | +--@t{yoyodyne} | +--@t{tc} | | | +--@t{man} | | | +--@t{testing} | +--(other Yoyodyne software) @end example There are a couple of different ways to tell @sc{cvs} where to find the repository. You can name the repository on the command line explicitly, with the @code{-d} (for "directory") option: @example cvs -d /usr/local/cvsroot checkout yoyodyne/tc @end example Or you can set the @code{$CVSROOT} environment variable to an absolute path to the root of the repository, @file{/usr/local/cvsroot} in this example. To set @code{$CVSROOT}, all @code{csh} and @code{tcsh} users should have this line in their @file{.cshrc} or @file{.tcshrc} files: @example setenv CVSROOT /usr/local/cvsroot @end example @noindent @code{sh} and @code{bash} users should instead have these lines in their @file{.profile} or @file{.bashrc}: @example CVSROOT=/usr/local/cvsroot export CVSROOT @end example A repository specified with @code{-d} will override the @code{$CVSROOT} environment variable. Once you've checked a working copy out from the repository, it will remember where its repository is (the information is recorded in the @file{@sc{cvs}/Root} file in the working copy). The @code{-d} option and the @file{@sc{cvs}/Root} file both override the @code{$CVSROOT} environment variable; however, @sc{CVS} will complain if the @file{-d} argument and the @file{@sc{cvs}/Root} file disagree. There is nothing magical about the name @file{/usr/local/cvsroot}. You can choose to place the repository anywhere you like. @xref{Remote repositories} to learn how the repository can be on a different machine than your working copy of the sources. The repository is split in two parts. @file{$CVSROOT/CVSROOT} contains administrative files for @sc{cvs}. The other directories contain the actual user-defined modules. @menu * User modules:: The structure of the repository * Intro administrative files:: Defining modules * Multiple repositories:: Multiple repositories * Creating a repository:: Creating a repository * Remote repositories:: Accessing repositories on remote machines @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node User modules @section User modules @cindex User modules @cindex Repository, user parts @example @code{$CVSROOT} | +--@t{yoyodyne} | | | +--@t{tc} | | | +--@t{Makefile,v} +--@t{backend.c,v} +--@t{driver.c,v} +--@t{frontend.c,v} +--@t{parser.c,v} +--@t{man} | | | +--@t{tc.1,v} | +--@t{testing} | +--@t{testpgm.t,v} +--@t{test2.t,v} @end example @cindex History files @cindex RCS history files @cindex RCS, CVS uses RCS The figure above shows the contents of the @samp{tc} module inside the repository. As you can see all file names end in @samp{,v}. The files are @dfn{history files}. They contain, among other things, enough information to recreate any revision of the file, a log of all commit messages and the user-name of the person who committed the revision. @sc{cvs} uses the facilities of @sc{rcs}, a simpler version control system, to maintain these files. For a full description of the file format, see the @code{man} page @cite{rcsfile(5)}. @c -- Use this format for all references to man pages, @c -- or use something better! @menu * File permissions:: File permissions @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node File permissions @subsection File permissions @c -- Move this to @node Setting up @cindex Security @cindex File permissions @cindex Group All @samp{,v} files are created read-only, and you should not change the permission of those files. The directories inside the repository should be writable by the persons that have permission to modify the files in each directory. This normally means that you must create a UNIX group (see group(5)) consisting of the persons that are to edit the files in a project, and set up the repository so that it is that group that owns the directory. This means that you can only control access to files on a per-directory basis. @sc{cvs} tries to set up reasonable file permissions for new directories that are added inside the tree, but you must fix the permissions manually when a new directory should have different permissions than its parent directory. @cindex setuid @cindex setgid Since @sc{cvs} was not written to be run setuid, it is unsafe to try to run it setuid. You cannot use the setuid features of @sc{rcs} together with @sc{cvs}. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Intro administrative files @section The administrative files @cindex Administrative files (intro) @cindex Modules file @cindex CVSROOT, module name @cindex Defining modules (intro) The directory @file{$CVSROOT/CVSROOT} contains some @dfn{administrative files}. @xref{Administrative files}, for a complete description. You can use @sc{cvs} without any of these files, but some commands work better when at least the @file{modules} file is properly set up. The most important of these files is the @file{modules} file. It defines all modules in the repository. This is a sample @file{modules} file. @example CVSROOT -i mkmodules CVSROOT modules -i mkmodules CVSROOT modules cvs gnu/cvs rcs gnu/rcs diff gnu/diff tc yoyodyne/tc @end example The @file{modules} file is line oriented. In its simplest form each line contains the name of the module, whitespace, and the directory where the module resides. The directory is a path relative to @code{$CVSROOT}. The last for lines in the example above are examples of such lines. @cindex mkmodules Each module definition can contain options. The @samp{-i mkmodules} is an example of an option. It arranges for @sc{cvs} to run the @code{mkmodules} program whenever any file in the module CVSROOT is committed. That program is responsible for checking out read-only copies from the @sc{rcs} @dfn{history files} of all the administrative files. These read-only copies are used internally by @sc{cvs}. You should never edit them directly. The line that defines the module called @samp{modules} uses features that are not explained here. @xref{modules}, for a full explanation of all the available features. @subsection Editing administrative files @cindex Editing administrative files @cindex Administrative files, editing them You edit the administrative files in the same way that you would edit any other module. Use @samp{cvs checkout CVSROOT} to get a working copy, edit it, and commit your changes in the normal way. It is possible to commit an erroneous administrative file. You can often fix the error and check in a new revision, but sometimes a particularly bad error in the administrative file makes it impossible to commit new revisions. @c @xref{Bad administrative files} for a hint @c about how to solve such situations. @c -- administrative file checking-- @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Multiple repositories @section Multiple repositories @cindex Multiple repositories @cindex Repositories, multiple @cindex Many repositories @cindex Parallel repositories @cindex Disjoint repositories @cindex CVSROOT, multiple repositories In some situations it is a good idea to have more than one repository, for instance if you have two development groups that work on separate projects without sharing any code. All you have to do to have several repositories is to set @code{$CVSROOT} to the repository you want to use at the moment. There are disadvantages to having more than one repository. In @sc{cvs} 1.3 you @emph{must} make sure that @code{$CVSROOT} always points to the correct repository. If the same filename is used in two repositories, and you mix up the setting of @code{$CVSROOT}, you might lose data. @sc{cvs} 1.4 solves this problem by saving the repository information in the local @file{CVS} administration files. If you try to use the wrong repository, @sc{cvs} will warn you of the attempt and then exit. Notwithstanding, it can be confusing to have two or more repositories. All examples in this manual assume that you have a single repository. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Creating a repository @section Creating a repository @c -- Well, how do you do? See the instructions in the @file{INSTALL} file in the @sc{cvs} distribution. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Remote repositories @section Remote repositories @cindex Repositories, remote @cindex Remote repositories @cindex Client/Server Operation @c I'm only documenting the rsh method, as I've never @c used kerberos access... The repository and your working copy of the sources can be on different machines. To access a remote repository, use the following format for its name: @example user@@hostname:/path/to/repository @end example (The @file{user@@} can be omitted if it's the same on both the local and remote hosts.) CVS uses the @file{rsh} protocol to perform these operations, so the remote user host needs to have a @file{.rhosts} file which grants access to the local user. For example, suppose you are the user @file{mozart} on the local machine @file{anklet.grunge.com}. You want to access the module @file{foo} in the repository @file{/usr/local/sources/}, on machine @file{chainsaw.brickyard.com}. If your username is also @file{bach} on @file{chainsaw.brickyard.com}, then you need only type @example cvs -d bach@@chainsaw.brickyard.com:/user/local/sources checkout foo @end example Remember, for this to work, @file{bach}'s @file{.rhosts} file must contain the line: @example anklet.grunge.com mozart @end example Once the working copy is checked out, it is not necessary to specify the repository explicitly for every subsequent operation --- the working copy records it in the @file{CVS/Root} file. @c --------------------------------------------------------------------- @node Starting a new project @chapter Starting a project with CVS @cindex Starting a project with CVS @cindex Creating a project @comment --moduledb-- Since @sc{cvs} 1.x is bad at renaming files and moving them between directories, the first thing you do when you start a new project should be to think through your file organization. It is not impossible---just awkward---to rename or move files in @sc{cvs} 1.x. @xref{Moving files}. What to do next depends on the situation at hand. @menu * Setting up the files:: Getting the files into the repository * Defining the module:: How to make a module of the files @end menu @c -- File permissions! @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Setting up the files @section Setting up the files The first step is to create the files inside the repository. This can be done in a couple of different ways. @c -- The contributed scripts @menu * From files:: This method is useful with old projects where files already exists. * From scratch:: Creating a module from scratch. @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node From files @subsection Creating a module from a number of files @cindex Importing files When you begin using @sc{cvs}, you will probably already have several projects that can be put under @sc{cvs} control. In these cases the easiest way is to use the @code{import} command. An example is probably the easiest way to explain how to use it. If the files you want to install in @sc{cvs} reside in @file{@var{dir}}, and you want them to appear in the repository as @file{$CVSROOT/yoyodyne/@var{dir}}, you can do this: @example $ cd @var{dir} $ cvs import -m "Imported sources" yoyodyne/@var{dir} yoyo start @end example Unless you supply a log message with the @samp{-m} flag, @sc{cvs} starts an editor and prompts for a message. The string @samp{yoyo} is a @dfn{vendor tag}, and @samp{start} is a @dfn{release tag}. They may fill no purpose in this context, but since @sc{cvs} requires them they must be present. @xref{Tracking sources}, for more information about them. You can now verify that it worked, and remove your original source directory. @example $ cd .. $ mv @var{dir} @var{dir}.orig $ cvs checkout yoyodyne/@var{dir} # @r{Explanation below} $ ls -R yoyodyne $ rm -r @var{dir}.orig @end example @noindent Erasing the original sources is a good idea, to make sure that you do not accidentally edit them in @var{dir}, bypassing @sc{cvs}. Of course, it would be wise to make sure that you have a backup of the sources before you remove them. The @code{checkout} command can either take a module name as argument (as it has done in all previous examples) or a path name relative to @code{$CVSROOT}, as it did in the example above. It is a good idea to check that the permissions @sc{cvs} sets on the directories inside @samp{$CVSROOT} are reasonable, and that they belong to the proper groups. @xref{File permissions}. @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node From scratch @subsection Creating a module from scratch For a new project, the easiest thing to do is probably to create an empty directory structure, like this: @example $ mkdir tc $ mkdir tc/man $ mkdir tc/testing @end example After that, you use the @code{import} command to create the corresponding (empty) directory structure inside the repository: @example $ cd tc $ cvs import -m "Created directory structure" yoyodyne/@var{dir} yoyo start @end example Then, use @code{add} to add files (and new directories) as they appear. Check that the permissions @sc{cvs} sets on the directories inside @samp{$CVSROOT} are reasonable. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Defining the module @section Defining the module @cindex Defining a module @cindex Editing the modules file @cindex Module, defining @cindex Modules file, changing The next step is to define the module in the @file{modules} file. Some @sc{cvs} commands work without this step, but others (most notably @code{release}) require that all modules are properly defined in the @file{modules} file. In simple cases these steps are sufficient to define a module. @enumerate @item Get a working copy of the modules file. @example $ cvs checkout modules $ cd modules @end example @item Edit the file and insert a line that defines the module. @xref{Intro administrative files}, for an introduction. @xref{modules}, for a full description of the modules file. You can use the following line to define the module @samp{tc}: @example tc yoyodyne/tc @end example @item Commit your changes to the modules file. @example $ cvs commit -m "Added the tc module." modules @end example @item Release the modules module. @example $ cd .. $ cvs release -d modules @end example @end enumerate @c --------------------------------------------------------------------- @node Multiple developers @chapter Multiple developers @cindex Multiple developers @cindex Team of developers @cindex File locking @cindex Locking files @cindex Working copy When more than one person works on a software project things often get complicated. Often, two people try to edit the same file simultaneously. Some other version control systems (including @sc{rcs} and @sc{sccs}) try to solve that particular problem by introducing @dfn{file locking}, so that only one person can edit each file at a time. Unfortunately, file locking can be very counter-productive. If two persons want to edit different parts of a file, there may be no reason to prevent either of them from doing so. @sc{cvs} does not use file locking. Instead, it allows many people to edit their own @dfn{working copy} of a file simultaneously. The first person that commits his changes has no automatic way of knowing that another has started to edit it. Others will get an error message when they try to commit the file. They must then use @sc{cvs} commands to bring their working copy up to date with the repository revision. This process is almost automatic, and explained in this chapter. There are many ways to organize a team of developers. @sc{cvs} does not try to enforce a certain organization. It is a tool that can be used in several ways. It is often useful to inform the group of commits you have done. @sc{cvs} has several ways of automating that process. @xref{Informing others}. @xref{Revision management}, for more tips on how to use @sc{cvs}. @menu * File status:: A file can be in several states * Updating a file:: Bringing a file up-to-date * Conflicts example:: An informative example * Informing others:: To cooperate you must inform @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node File status @section File status @cindex File status @cindex Status of a file @cindex Four states of a file After you have checked out a file out from @sc{cvs}, it is in one of these four states: @table @asis @cindex Up-to-date @item Up-to-date The file is identical with the latest revision in the repository. @c -- The above is not always true if branching is used. @item Locally modified @cindex Locally modified You have edited the file, and not yet committed your changes. @item Needing update @cindex Needing update Someone else has committed a newer revision to the repository. @item Needing merge @cindex Needing merge Someone else have committed a newer revision to the repository, and you have also made modifications to the file. @c -- What about "added" "removed" and so on? @end table You can use the @code{status} command to find out the status of a given file. @xref{status}. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Updating a file @section Bringing a file up to date @cindex Bringing a file up to date @cindex Updating a file @cindex Merging a file @cindex update, introduction When you want to update or merge a file, use the @code{update} command. For files that are not up to date this is roughly equivalent to a @code{checkout} command: the newest revision of the file is extracted from the repository and put in your working copy of the module. Your modifications to a file are never lost when you use @code{update}. If no newer revision exists, running @code{update} has no effect. If you have edited the file, and a newer revision is available, @sc{cvs} will merge all changes into your working copy. For instance, imagine that you checked out revision 1.4 and started editing it. In the meantime someone else committed revision 1.5, and shortly after that revision 1.6. If you run @code{update} on the file now, @sc{cvs} will incorporate all changes between revision 1.4 and 1.6 into your file. @cindex Overlap If any of the changes between 1.4 and 1.6 were made too close to any of the changes you have made, an @dfn{overlap} occurs. In such cases a warning is printed, and the resulting file includes both versions of the lines that overlap, delimited by special markers. @xref{update}, for a complete description of the @code{update} command. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Conflicts example @section Conflicts example @cindex Merge, an example @cindex Example of merge @cindex driver.c (merge example) Suppose revision 1.4 of @file{driver.c} contains this: @example #include void main() @{ parse(); if (nerr == 0) gencode(); else fprintf(stderr, "No code generated.\n"); exit(nerr == 0 ? 0 : 1); @} @end example @noindent Revision 1.6 of @file{driver.c} contains this: @example #include int main(int argc, char **argv) @{ parse(); if (argc != 1) @{ fprintf(stderr, "tc: No args expected.\n"); exit(1); @} if (nerr == 0) gencode(); else fprintf(stderr, "No code generated.\n"); exit(!!nerr); @} @end example @noindent Your working copy of @file{driver.c}, based on revision 1.4, contains this before you run @samp{cvs update}: @c -- Really include "cvs"? @example #include #include void main() @{ init_scanner(); parse(); if (nerr == 0) gencode(); else fprintf(stderr, "No code generated.\n"); exit(nerr == 0 ? EXIT_SUCCESS : EXIT_FAILURE); @} @end example @noindent You run @samp{cvs update}: @c -- Really include "cvs"? @example $ cvs update driver.c RCS file: /usr/local/cvsroot/yoyodyne/tc/driver.c,v retrieving revision 1.4 retrieving revision 1.6 Merging differences between 1.4 and 1.6 into driver.c rcsmerge warning: overlaps during merge cvs update: conflicts found in driver.c C driver.c @end example @noindent @cindex Conflicts (merge example) @sc{cvs} tells you that there were some conflicts. Your original working file is saved unmodified in @file{.#driver.c.1.4}. The new version of @file{driver.c} contains this: @example #include #include int main(int argc, char **argv) @{ init_scanner(); parse(); if (argc != 1) @{ fprintf(stderr, "tc: No args expected.\n"); exit(1); @} if (nerr == 0) gencode(); else fprintf(stderr, "No code generated.\n"); <<<<<<< driver.c exit(nerr == 0 ? EXIT_SUCCESS : EXIT_FAILURE); ======= exit(!!nerr); >>>>>>> 1.6 @} @end example @noindent @cindex Markers, conflict @cindex Conflict markers @cindex <<<<<<< @cindex >>>>>>> @cindex ======= Note how all non-overlapping modifications are incorporated in your working copy, and that the overlapping section is clearly marked with @samp{<<<<<<<}, @samp{=======} and @samp{>>>>>>>}. @cindex Resolving a conflict @cindex Conflict resolution You resolve the conflict by editing the file, removing the markers and the erroneous line. Suppose you end up with this file: @c -- Add xref to the pcl-cvs manual when it talks @c -- about this. @example #include #include int main(int argc, char **argv) @{ init_scanner(); parse(); if (argc != 1) @{ fprintf(stderr, "tc: No args expected.\n"); exit(1); @} if (nerr == 0) gencode(); else fprintf(stderr, "No code generated.\n"); exit(nerr == 0 ? EXIT_SUCCESS : EXIT_FAILURE); @} @end example @noindent You can now go ahead and commit this as revision 1.7. @example $ cvs commit -m "Initialize scanner. Use symbolic exit values." driver.c Checking in driver.c; /usr/local/cvsroot/yoyodyne/tc/driver.c,v <-- driver.c new revision: 1.7; previous revision: 1.6 done @end example @cindex emerge If you use release 1.04 or later of pcl-cvs (a @sc{gnu} Emacs front-end for @sc{cvs}) you can use an Emacs package called emerge to help you resolve conflicts. See the documentation for pcl-cvs. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Informing others @section Informing others about commits @cindex Informing others @cindex Spreading information @cindex Mail, automatic mail on commit It is often useful to inform others when you commit a new revision of a file. The @samp{-i} option of the @file{modules} file, or the @file{loginfo} file, can be used to automate this process. @xref{modules}. @xref{loginfo}. You can use these features of @sc{cvs} to, for instance, instruct @sc{cvs} to mail a message to all developers, or post a message to a local newsgroup. @c -- More text would be nice here. @c --------------------------------------------------------------------- @node Branches @chapter Branches @cindex Branches @cindex Main trunk and branches @cindex Revision tree, making branches So far, all revisions shown in this manual have been on the @dfn{main trunk} of the revision tree, i.e., all revision numbers have been of the form @var{x}.@var{y}. One useful feature, especially when maintaining several releases of a software product at once, is the ability to make branches on the revision tree. @dfn{Tags}, symbolic names for revisions, will also be introduced in this chapter. @menu * Tags:: Tags--Symbolic revisions * Branches motivation:: What branches are good for * Creating a branch:: Creating a branch * Sticky tags:: Sticky tags @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Tags @section Tags--Symbolic revisions @cindex Tags The revision numbers live a life of their own. They need not have anything at all to do with the release numbers of your software product. Depending on how you use @sc{cvs} the revision numbers might change several times between two releases. As an example, some of the source files that make up @sc{rcs} 5.6 have the following revision numbers: @cindex RCS revision numbers @example ci.c 5.21 co.c 5.9 ident.c 5.3 rcs.c 5.12 rcsbase.h 5.11 rcsdiff.c 5.10 rcsedit.c 5.11 rcsfcmp.c 5.9 rcsgen.c 5.10 rcslex.c 5.11 rcsmap.c 5.2 rcsutil.c 5.10 @end example @cindex tag, command, introduction @cindex Tag, symbolic name @cindex Symbolic name (tag) @cindex Name, symbolic (tag) You can use the @code{tag} command to give a symbolic name to a certain revision of a file. You can use the @samp{-v} flag to the @code{status} command to see all tags that a file has, and which revision numbers they represent. (The output of @code{status} unfortunately uses the word ``version'' instead of ``revision''.) @c -- Is this fixed in CVS 1.3.1? @cindex Adding a tag @cindex tag, example The following example shows how you can add a tag to a file. The commands must be issued inside your working copy of the module. That is, you should issue the command in the directory where @file{backend.c} resides. @example $ cvs tag release-0-4 backend.c T backend.c $ cvs status -v backend.c =================================================================== File: backend.c Status: Up-to-date Version: 1.4 Tue Dec 1 14:39:01 1992 RCS Version: 1.4 /usr/local/cvsroot/yoyodyne/tc/backend.c,v Sticky Tag: (none) Sticky Date: (none) Sticky Options: (none) Existing Tags: release-0-4 (revision: 1.4) @end example There is seldom reason to tag a file in isolation. A more common use is to tag all the files that constitute a module with the same tag at strategic points in the development life-cycle, such as when a release is made. @example $ cvs tag release-1-0 . cvs tag: Tagging . T Makefile T backend.c T driver.c T frontend.c T parser.c @end example (When you give @sc{cvs} a directory as argument, it generally applies the operation to all the files in that directory, and (recursively), to any subdirectories that it may contain. @xref{Recursive behavior}.) @cindex Retrieving an old revision using tags @cindex Tag, retrieving old revisions The @code{checkout} command has a flag, @samp{-r}, that lets you check out a certain revision of a module. This flag makes it easy to retrieve the sources that make up release 1.0 of the module @samp{tc} at any time in the future: @example $ cvs checkout -r release-1-0 tc @end example @noindent This is useful, for instance, if someone claims that there is a bug in that release, but you cannot find the bug in the current working copy. You can also check out a module as it was at any given date. @xref{checkout options}. When you tag more than one file with the same tag you can think about the tag as "a curve drawn through a matrix of filename vs. revision number." Say we have 5 files with the following revisions: @example @group file1 file2 file3 file4 file5 1.1 1.1 1.1 1.1 /--1.1* <-*- TAG 1.2*- 1.2 1.2 -1.2*- 1.3 \- 1.3*- 1.3 / 1.3 1.4 \ 1.4 / 1.4 \-1.5*- 1.5 1.6 @end group @end example At some time in the past, the @code{*} versions were tagged. You can think of the tag as a handle attached to the curve drawn through the tagged revisions. When you pull on the handle, you get all the tagged revisions. Another way to look at it is that you "sight" through a set of revisions that is "flat" along the tagged revisions, like this: @example @group file1 file2 file3 file4 file5 1.1 1.2 1.1 1.3 _ 1.1 1.2 1.4 1.1 / 1.2*----1.3*----1.5*----1.2*----1.1 (--- <--- Look here 1.3 1.6 1.3 \_ 1.4 1.4 1.5 @end group @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Branches motivation @section What branches are good for @cindex Branches motivation @cindex What branches are good for @cindex Motivation for branches Suppose that release 1.0 of tc has been made. You are continuing to develop tc, planning to create release 1.1 in a couple of months. After a while your customers start to complain about a fatal bug. You check out release 1.0 (@pxref{Tags}) and find the bug (which turns out to have a trivial fix). However, the current revision of the sources are in a state of flux and are not expected to be stable for at least another month. There is no way to make a bugfix release based on the newest sources. The thing to do in a situation like this is to create a @dfn{branch} on the revision trees for all the files that make up release 1.0 of tc. You can then make modifications to the branch without disturbing the main trunk. When the modifications are finished you can select to either incorporate them on the main trunk, or leave them on the branch. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Creating a branch @section Creating a branch @cindex Creating a branch @cindex Branch, creating a @cindex rtag, creating a branch using The @code{rtag} command can be used to create a branch. The @code{rtag} command is much like @code{tag}, but it does not require that you have a working copy of the module. @xref{rtag}. (You can also use the @code{tag} command; @pxref{tag}). @example $ cvs rtag -b -r release-1-0 release-1-0-patches tc @end example The @samp{-b} flag makes @code{rtag} create a branch (rather than just a symbolic revision name). @samp{-r release-1-0} says that this branch should be rooted at the node (in the revision tree) that corresponds to the tag @samp{release-1-0}. Note that the numeric revision number that matches @samp{release-1-0} will probably be different from file to file. The name of the new branch is @samp{release-1-0-patches}, and the module affected is @samp{tc}. To fix the problem in release 1.0, you need a working copy of the branch you just created. @example $ cvs checkout -r release-1-0-patches tc $ cvs status -v driver.c backend.c =================================================================== File: driver.c Status: Up-to-date Version: 1.7 Sat Dec 5 18:25:54 1992 RCS Version: 1.7 /usr/local/cvsroot/yoyodyne/tc/driver.c,v Sticky Tag: release-1-0-patches (branch: 1.7.2) Sticky Date: (none) Sticky Options: (none) Existing Tags: release-1-0-patches (branch: 1.7.2) release-1-0 (revision: 1.7) =================================================================== File: backend.c Status: Up-to-date Version: 1.4 Tue Dec 1 14:39:01 1992 RCS Version: 1.4 /usr/local/cvsroot/yoyodyne/tc/backend.c,v Sticky Tag: release-1-0-patches (branch: 1.4.2) Sticky Date: (none) Sticky Options: (none) Existing Tags: release-1-0-patches (branch: 1.4.2) release-1-0 (revision: 1.4) release-0-4 (revision: 1.4) @end example @cindex Branch numbers As the output from the @code{status} command shows the branch number is created by adding a digit at the tail of the revision number it is based on. (If @samp{release-1-0} corresponds to revision 1.4, the branch's revision number will be 1.4.2. For obscure reasons @sc{cvs} always gives branches even numbers, starting at 2. @xref{Revision numbers}). @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Sticky tags @section Sticky tags @cindex Sticky tags @cindex Tags, sticky @cindex Branches, sticky The @samp{-r release-1-0-patches} flag that was given to @code{checkout} is @dfn{sticky}, that is, it will apply to subsequent commands in this directory. If you commit any modifications, they are committed on the branch. You can later merge the modifications into the main trunk. @xref{Merging}. @example $ vi driver.c # @r{Fix the bugs} $ cvs commit -m "Fixed initialization bug" driver.c Checking in driver.c; /usr/local/cvsroot/yoyodyne/tc/driver.c,v <-- driver.c new revision: 1.7.2.1; previous revision: 1.7 done $ cvs status -v driver.c =================================================================== File: driver.c Status: Up-to-date Version: 1.7.2.1 Sat Dec 5 19:35:03 1992 RCS Version: 1.7.2.1 /usr/local/cvsroot/yoyodyne/tc/driver.c,v Sticky Tag: release-1-0-patches (branch: 1.7.2) Sticky Date: (none) Sticky Options: (none) Existing Tags: release-1-0-patches (branch: 1.7.2) release-1-0 (revision: 1.7) @end example @cindex Resetting sticky tags @cindex Sticky tags, resetting @cindex Deleting sticky tags The sticky tags will remain on your working files until you delete them with @samp{cvs update -A}. @xref{update}. Sticky tags are not just for branches. If you check out a certain revision (such as 1.4) it will also become sticky. Subsequent @samp{cvs update} will not retrieve the latest revision until you reset the tag with @samp{cvs update -A}. See the descriptions in Appendix A for more information about sticky tags. Dates and some other options can also be sticky. Again, see Appendix A for details. @c -- xref to relevant part of App A. @c -- Re-evaluate this node. @c --------------------------------------------------------------------- @node Merging @chapter Merging @cindex Merging @cindex Copying changes @cindex Branches, copying changes between @cindex Changes, copying between branches @cindex Modifications, copying between branches You can include the changes made between any two revisions into your working copy, by @dfn{merging}. You can then commit that revision, and thus effectively copy the changes onto another branch. @menu * Merging a branch:: Merging an entire branch * Merging two revisions:: Merging differences between two revisions @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Merging a branch @section Merging an entire branch @cindex Merging a branch @cindex -j (merging branches) You can merge changes made on a branch into your working copy by giving the @samp{-j @var{branch}} flag to the @code{update} command. With one @samp{-j @var{branch}} option it merges the changes made between the point where the branch forked and newest revision on that branch (into your working copy). @cindex Join The @samp{-j} stands for ``join''. In previous versions of @sc{cvs} there was a special command, @samp{cvs join}, that was used to merge changes between branches. @cindex Branch merge example @cindex Example, branch merge @cindex Merge, branch example Consider this revision tree: @example +-----+ +-----+ +-----+ +-----+ +-----+ ! 1.1 !----! 1.2 !----! 1.3 !----! 1.4 !----! 1.5 ! <- The main trunk +-----+ +-----+ +-----+ +-----+ +-----+ ! ! ! +---------+ +---------+ +---------+ Branch R1fix -> +---! 1.2.2.1 !----! 1.2.2.2 !----! 1.2.2.3 ! +---------+ +---------+ +---------+ @end example @noindent The branch 1.2.2 has been given the tag (symbolic name) @samp{R1fix}. The following example assumes that the module @samp{mod} contains only one file, @file{m.c}. @example $ cvs checkout mod # @r{Retrieve the latest revision, 1.5} $ cvs update -j R1fix m.c # @r{Merge all changes made on the branch,} # @r{i.e. the changes between revision 1.2} # @r{and 1.2.2.3, into your working copy} # @r{of the file.} $ cvs commit -m "Included R1fix" # @r{Create revision 1.6.} @end example A conflict can result from a merge operation. If that happens, you should resolve it before committing the new revision. @xref{Conflicts example}. The @code{checkout} command also supports the @samp{-j @var{branch}} flag. The same effect as above could be achieved with this: @example $ cvs checkout -j R1fix mod $ cvs commit -m "Included R1fix" @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Merging two revisions @section Merging differences between any two revisions @cindex Merging two revisions @cindex Revisions, merging differences between @cindex Differences, merging With two @samp{-j @var{revision}} flags, the @code{update} (and @code{checkout}) command can merge the differences between any two revisions into your working file. @cindex Undoing a change @cindex Removing a change @example $ cvs update -j 1.5 -j 1.3 backend.c @end example @noindent will @emph{remove} all changes made between revision 1.3 and 1.5. Note the order of the revisions! If you try to use this option with the @code{checkout} command, remember that the numeric revisions will probably be very different between the various files that make up a module. You almost always use symbolic tags rather than revision numbers with the @code{checkout} command. @c --------------------------------------------------------------------- @node Recursive behavior @chapter Recursive behavior @cindex Recursive (directory descending) @cindex Directory, descending @cindex Descending directories @cindex Subdirectories Almost all of the subcommands of @sc{cvs} work recursively when you specify a directory as an argument. For instance, consider this directory structure: @example @code{$HOME} | +--@t{tc} | | +--@t{CVS} | (internal @sc{cvs} files) +--@t{Makefile} +--@t{backend.c} +--@t{driver.c} +--@t{frontend.c} +--@t{parser.c} +--@t{man} | | | +--@t{CVS} | | (internal @sc{cvs} files) | +--@t{tc.1} | +--@t{testing} | +--@t{CVS} | (internal @sc{cvs} files) +--@t{testpgm.t} +--@t{test2.t} @end example @noindent If @file{tc} is the current working directory, the following is true: @itemize @bullet @item @samp{cvs update testing} is equivalent to @samp{cvs update testing/testpgm.t testing/test2.t} @item @samp{cvs update testing man} updates all files in the subdirectories @item @samp{cvs update .} or just @samp{cvs update} updates all files in the @code{tc} module @end itemize If no arguments are given to @code{update} it will update all files in the current working directory and all its subdirectories. In other words, @file{.} is a default argument to @code{update}. This is also true for most of the @sc{cvs} subcommands, not only the @code{update} command. The recursive behavior of the @sc{cvs} subcommands can be turned off with the @samp{-l} option. @example $ cvs update -l # @r{Don't update files in subdirectories} @end example @c --------------------------------------------------------------------- @node Adding files @chapter Adding files to a module @cindex Adding files To add a new file to a module, follow these steps. @itemize @bullet @item You must have a working copy of the module. @xref{Getting the source}. @item Create the new file inside your working copy of the module. @item Use @samp{cvs add @var{filename}} to tell @sc{cvs} that you want to version control the file. @item Use @samp{cvs commit @var{filename}} to actually check in the file into the repository. Other developers cannot see the file until you perform this step. @item If the file contains binary data it might be necessary to change the default keyword substitution. @xref{Keyword substitution}. @xref{admin examples}. @end itemize You can also use the @code{add} command to add a new directory inside a module. Unlike most other commands, the @code{add} command is not recursive. You cannot even type @samp{cvs add foo/bar}! Instead, you have to @example $ cd foo $ cvs add bar @end example @xref{add}, for a more complete description of the @code{add} command. @c --------------------------------------------------------------------- @node Removing files @chapter Removing files from a module @cindex Removing files @cindex Deleting files Modules change. New files are added, and old files disappear. Still, you want to be able to retrieve an exact copy of old releases of the module. Here is what you can do to remove a file from a module, but remain able to retrieve old revisions: @itemize @bullet @item Make sure that you have not made any uncommitted modifications to the file. @xref{Viewing differences}, for one way to do that. You can also use the @code{status} or @code{update} command. If you remove the file without committing your changes, you will of course not be able to retrieve the file as it was immediately before you deleted it. @item Remove the file from your working copy of the module. You can for instance use @code{rm}. @item Use @samp{cvs remove @var{filename}} to tell @sc{cvs} that you really want to delete the file. @item Use @samp{cvs commit @var{filename}} to actually perform the removal of the file from the repository. @end itemize What happens when you commit the removal of the file is that inside the source repository, it is moved into a subdirectory called @file{Attic}. @sc{cvs} normally doesn't look in that directory when you run e.g. @code{checkout}. However, if you are retrieving a certain revision via e.g. @samp{cvs checkout -r @var{some-tag}}, it will look at the files inside the @file{Attic} and include any files that contain the specified tag. @c --------------------------------------------------------------------- @node Tracking sources @chapter Tracking third-party sources @cindex Third-party sources @cindex Tracking sources If you modify a program to better fit your site, you probably want to include your modifications when the next release of the program arrives. @sc{cvs} can help you with this task. @cindex Vendor @cindex Vendor branch @cindex Branch, vendor- In the terminology used in @sc{cvs}, the supplier of the program is called a @dfn{vendor}. The unmodified distribution from the vendor is checked in on its own branch, the @dfn{vendor branch}. @sc{cvs} reserves branch 1.1.1 for this use. When you modify the source and commit it, your revision will end up on the main trunk. When a new release is made by the vendor, you commit it on the vendor branch and copy the modifications onto the main trunk. Use the @code{import} command to create and update the vendor branch. After a successful @code{import} the vendor branch is made the `head' revision, so anyone that checks out a copy of the file gets that revision. When a local modification is committed it is placed on the main trunk, and made the `head' revision. @menu * First import:: Importing a module for the first time * Update imports:: Updating a module with the import command @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node First import @section Importing a module for the first time @cindex Importing modules Use the @code{import} command to check in the sources for the first time. When you use the @code{import} command to track third-party sources, the @dfn{vendor tag} and @dfn{release tags} are useful. The @dfn{vendor tag} is a symbolic name for the branch (which is always 1.1.1, unless you use the @samp{-b @var{branch}} flag---@xref{import options}). The @dfn{release tags} are symbolic names for a particular release, such as @samp{FSF_0_04}. @cindex Wdiff (import example) Suppose you use @code{wdiff} (a variant of @code{diff} that ignores changes that only involve whitespace), and are going to make private modifications that you want to be able to use even when new releases are made in the future. You start by importing the source to your repository: @example $ tar xfz wdiff-0.04.tar.gz $ cd wdiff-0.04 $ cvs import -m "Import of FSF v. 0.04" fsf/wdiff FSF WDIFF_0_04 @end example The vendor tag is named @samp{FSF} in the above example, and the only release tag assigned is @samp{WDIFF_0_04}. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Update imports @section Updating a module with the import command When a new release of the source arrives, you import it into the repository with the same @code{import} command that you used to set up the repository in the first place. The only difference is that you specify a different release tag this time. @example $ tar xfz wdiff-0.05.tar.gz $ cd wdiff-0.05 $ cvs import -m "Import of FSF v. 0.05" fsf/wdiff FSF WDIFF_0_05 @end example For files that have not been modified locally, the newly created revision becomes the head revision. If you have made local changes, @code{import} will warn you that you must merge the changes into the main trunk, and tell you to use @samp{checkout -j} to do so. @example $ cvs checkout -jFSF:yesterday -jFSF wdiff @end example @noindent The above command will check out the latest revision of @samp{wdiff}, merging the changes made on the vendor branch @samp{FSF} since yesterday into the working copy. If any conflicts arise during the merge they should be resolved in the normal way (@pxref{Conflicts example}). Then, the modified files may be committed. @sc{cvs} assumes that you do not import more than one release of a product per day. If you do, you can always use something like this instead: @example $ cvs checkout -jWDIFF_0_04 -jWDIFF_0_05 wdiff @end example @noindent In this case, the two above commands are equivalent. @c --------------------------------------------------------------------- @node Moving files @chapter Moving and renaming files @cindex Moving files @cindex Renaming files @cindex Files, moving Moving files to a different directory or renaming them is not difficult, but some of the ways in which this works may be non-obvious. (Moving or renaming a directory is even harder. @xref{Moving directories}). The examples below assume that the file @var{old} is renamed to @var{new}. @menu * Outside:: The normal way to Rename * Inside:: A tricky, alternative way * Rename by copying:: Another tricky, alternative way @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Outside @section The Normal way to Rename The normal way to move a file is to copy @var{old} to @var{new}, and then issue the normal @sc{cvs} commands to remove @var{old} from the repository, and add @var{new} to it. (Both @var{old} and @var{new} could contain relative paths, for example @file{foo/bar.c}). @example $ mv @var{old} @var{new} $ cvs remove @var{old} $ cvs add @var{new} $ cvs commit -m "Renamed @var{old} to @var{new}" @var{old} @var{new} @end example This is the simplest way to move a file, it is not error-prone, and it preserves the history of what was done. Note that to access the history of the file you must specify the old or the new name, depending on what portion of the history you are accessing. For example, @code{cvs log @var{old}} will give the log up until the time of the rename. When @var{new} is committed its revision numbers will start at 1.0 again, so if that bothers you, use the @samp{-r rev} option to commit (@pxref{commit options}) @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Inside @section Moving the history file This method is more dangerous, since it involves moving files inside the repository. Read this entire section before trying it out! @example $ cd $CVSROOT/@var{module} $ mv @var{old},v @var{new},v @end example @noindent Advantages: @itemize @bullet @item The log of changes is maintained intact. @item The revision numbers are not affected. @end itemize @noindent Disadvantages: @itemize @bullet @item Old releases of the module cannot easily be fetched from the repository. (The file will show up as @var{new} even in revisions from the time before it was renamed). @item There is no log information of when the file was renamed. @item Nasty things might happen if someone accesses the history file while you are moving it. Make sure no one else runs any of the @sc{cvs} commands while you move it. @end itemize @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Rename by copying @section Copying the history file This way also involves direct modifications to the repository. It is safe, but not without drawbacks. @example # @r{Copy the @sc{rcs} file inside the repository} $ cd $CVSROOT/@var{module} $ cp @var{old},v @var{new},v # @r{Remove the old file} $ cd ~/@var{module} $ rm @var{old} $ cvs remove @var{old} $ cvs commit @var{old} # @r{Remove all tags from @var{new}} $ cvs update @var{new} $ cvs log @var{new} # @r{Remember the tag names} $ cvs tag -d @var{tag1} $ cvs tag -d @var{tag2} @dots{} @end example By removing the tags you will be able to check out old revisions of the module. @noindent Advantages: @itemize @bullet @item @c FIXME: Is this true about -D now that we have death @c support? See 5B.3 in the FAQ. Checking out old revisions works correctly, as long as you use @samp{-r@var{tag}} and not @samp{-D@var{date}} to retrieve the revisions. @item The log of changes is maintained intact. @item The revision numbers are not affected. @end itemize @noindent Disadvantages: @itemize @bullet @item You cannot easily see the history of the file across the rename. @item Unless you use the @samp{-r rev} (@pxref{commit options}) flag when @var{new} is committed its revision numbers will start at 1.0 again. @end itemize @c --------------------------------------------------------------------- @node Moving directories @chapter Moving and renaming directories @cindex Moving directories @cindex Renaming directories @cindex Directories, moving If you want to be able to retrieve old versions of the module, you must move each file in the directory with the @sc{cvs} commands. @xref{Outside}. The old, empty directory will remain inside the repository, but it will not appear in your workspace when you check out the module in the future. @c -- rephrase If you really want to rename or delete a directory, you can do it like this: @enumerate @item Inform everyone who has a copy of the module that the directory will be renamed. They should commit all their changes, and remove their working copies of the module, before you take the steps below. @item Rename the directory inside the repository. @example $ cd $CVSROOT/@var{module} $ mv @var{old-dir} @var{new-dir} @end example @item Fix the @sc{cvs} administrative files, if necessary (for instance if you renamed an entire module). @item Tell everyone that they can check out the module and continue working. @end enumerate If someone had a working copy of the module the @sc{cvs} commands will cease to work for him, until he removes the directory that disappeared inside the repository. It is almost always better to move the files in the directory instead of moving the directory. If you move the directory you are unlikely to be able to retrieve old releases correctly, since they probably depend on the name of the directories. @ignore @c --------------------------------------------------------------------- @c @node History browsing @chapter History browsing @cindex History browsing @cindex Traceability @cindex Isolation @c -- @quote{To lose ones history is to lose ones soul.} @c -- /// @c -- ///Those who cannot remember the past are condemned to repeat it. @c -- /// -- George Santayana @c -- /// @sc{cvs} tries to make it easy for a group of people to work together. This is done in two ways: @itemize @bullet @item Isolation---You have your own working copy of the source. You are not affected by modifications made by others until you decide to incorporate those changes (via the @code{update} command---@pxref{update}). @item Traceability---When something has changed, you can always see @emph{exactly} what changed. @end itemize There are several features of @sc{cvs} that together lead to traceability: @itemize @bullet @item Each revision of a file has an accompanying log message. @item All commits are optionally logged to a central history database. @item Logging information can be sent to a user-defined program (@pxref{loginfo}). @end itemize @c -- More text here. This chapter should talk about the history file, the @code{log} command, the usefulness of ChangeLogs even when you run @sc{cvs}, and things like that. @menu * log messages:: Log messages * history database:: The history database * user-defined logging:: User-defined logging @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node log messages @section Log messages Whenever you commit a file you specify a log message. /// @c -- @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node history database @section The history database /// @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node user-defined logging @section User-defined logging /// @end ignore @c --------------------------------------------------------------------- @node Keyword substitution @chapter Keyword substitution @cindex Keyword substitution @cindex Keyword expansion @cindex Identifying files @comment Be careful when editing this chapter. @comment Remember that this file is kept under @comment version control, so we must not accidentally @comment include a valid keyword in the running text. As long as you edit source files inside your working copy of a module you can always find out the state of your files via @samp{cvs status} and @samp{cvs log}. But as soon as you export the files from your development environment it becomes harder to identify which revisions they are. @sc{Rcs} uses a mechanism known as @dfn{keyword substitution} (or @dfn{keyword expansion}) to help identifying the files. Embedded strings of the form @code{$@var{keyword}$} and @code{$@var{keyword}:@dots{}$} in a file are replaced with strings of the form @code{$@var{keyword}:@var{value}$} whenever you obtain a new revision of the file. @menu * Keyword list:: RCS Keywords * Using keywords:: Using keywords * Avoiding substitution:: Avoiding substitution * Substitution modes:: Substitution modes * Log keyword:: Problems with the $@asis{}Log$ keyword. @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Keyword list @section RCS Keywords @cindex RCS keywords This is a list of the keywords that @sc{rcs} currently (in release 5.6.0.1) supports: @table @code @cindex Author keyword @item $@asis{Author}$ The login name of the user who checked in the revision. @cindex Date keyword @item $@asis{Date}$ The date and time (UTC) the revision was checked in. @cindex Header keyword @item $@asis{Header}$ A standard header containing the full pathname of the @sc{rcs} file, the revision number, the date (UTC), the author, the state, and the locker (if locked). Files will normally never be locked when you use @sc{cvs}. @cindex Id keyword @item $@asis{Id}$ Same as @code{$@asis{Header}$}, except that the @sc{rcs} filename is without a path. @cindex Locker keyword @item $@asis{Locker}$ The login name of the user who locked the revision (empty if not locked, and thus almost always useless when you are using @sc{cvs}). @cindex Log keyword @item $@asis{Log}$ The log message supplied during commit, preceded by a header containing the @sc{rcs} filename, the revision number, the author, and the date (UTC). Existing log messages are @emph{not} replaced. Instead, the new log message is inserted after @code{$@asis{Log:@dots{}}$}. Each new line is prefixed with a @dfn{comment leader} which @sc{rcs} guesses from the file name extension. It can be changed with @code{cvs admin -c}. @xref{admin options}. This keyword is useful for accumulating a complete change log in a source file, but for several reasons it can be problematic. @xref{Log keyword}. @cindex RCSfile keyword @item $@asis{RCSfile}$ The name of the RCS file without a path. @cindex Revision keyword @item $@asis{Revision}$ The revision number assigned to the revision. @cindex Source keyword @item $@asis{Source}$ The full pathname of the RCS file. @cindex State keyword @item $@asis{State}$ The state assigned to the revision. States can be assigned with @code{cvs admin -s}---@xref{admin options}. @end table @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Using keywords @section Using keywords To include a keyword string you simply include the relevant text string, such as @code{$@asis{Id}$}, inside the file, and commit the file. @sc{cvs} will automatically expand the string as part of the commit operation. @need 800 It is common to embed @code{$@asis{}Id$} string in the C source code. This example shows the first few lines of a typical file, after keyword substitution has been performed: @example static char *rcsid="$@asis{}Id: samp.c,v 1.5 1993/10/19 14:57:32 ceder Exp $"; /* @r{The following lines will prevent @code{gcc} version 2.@var{x}} @r{from issuing an "unused variable" warning}. */ #if __GNUC__ == 2 #define USE(var) static void * use_##var = (&use_##var, (void *) &var) USE (rcsid); #endif @end example Even though a clever optimizing compiler could remove the unused variable @code{rcsid}, most compilers tend to include the string in the binary. Some compilers have a @code{#pragma} directive to include literal text in the binary. @cindex Ident (shell command) The @code{ident} command (which is part of the @sc{rcs} package) can be used to extract keywords and their values from a file. This can be handy for text files, but it is even more useful for extracting keywords from binary files. @example $ ident samp.c samp.c: $@asis{}Id: samp.c,v 1.5 1993/10/19 14:57:32 ceder Exp $ $ gcc samp.c $ ident a.out a.out: $@asis{}Id: samp.c,v 1.5 1993/10/19 14:57:32 ceder Exp $ @end example @cindex What (shell command) S@sc{ccs} is another popular revision control system. It has a command, @code{what}, which is very similar to @code{ident} and used for the same purpose. Many sites without @sc{rcs} have @sc{sccs}. Since @code{what} looks for the character sequence @code{@@(#)} it is easy to include keywords that are detected by either command. Simply prefix the @sc{rcs} keyword with the magic @sc{sccs} phrase, like this: @example static char *id="@@(#) $@asis{}Id: ab.c,v 1.5 1993/10/19 14:57:32 ceder Exp $"; @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Avoiding substitution @section Avoiding substitution Keyword substitution has its disadvantages. Sometimes you might want the literal text string @samp{$@asis{}Author$} to appear inside a file without @sc{rcs} interpreting it as a keyword and expanding it into something like @samp{$@asis{}Author: ceder $}. There is unfortunately no way to selectively turn off keyword substitution. You can use @samp{-ko} (@pxref{Substitution modes}) to turn off keyword substitution entirely. (If you put binaries under version control you are strongly encouraged to use that option, for obvious reasons). In many cases you can avoid using @sc{rcs} keywords in the source, even though they appear in the final product. For example, the source for this manual contains @samp{$@@asis@{@}Author$} whenever the text @samp{$@asis{}Author$} should appear. In @code{nroff} and @code{troff} you can embed the null-character @code{\&} inside the keyword for a similar effect. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Substitution modes @section Substitution modes @cindex -k (RCS kflags) @cindex Kflag You can control how @sc{rcs} expands keywords through the use of the @samp{-k} option (@pxref{Common options}). The @samp{-k} option is available with the @code{add}, @code{checkout}, @code{diff} and @code{update} commands. Five different modes are available. They are: @table @samp @item -kkv Generate keyword strings using the default form, e.g. @code{$@asis{}Revision: 5.7 $} for the @code{Revision} keyword. @item -kkvl Like @samp{-kkv}, except that a locker's name is always inserted if the given revision is currently locked. This option is normally not useful when @sc{cvs} is used. @item -kk Generate only keyword names in keyword strings; omit their values. For example, for the @code{Revision} keyword, generate the string @code{$@asis{}Revision$} instead of @code{$@asis{}Revision: 5.7 $}. This option is useful to ignore differences due to keyword substitution when comparing different revisions of a file. @item -ko Generate the old keyword string, present in the working file just before it was checked in. For example, for the @code{Revision} keyword, generate the string @code{$@asis{}Revision: 1.1 $} instead of @code{$@asis{}Revision: 5.7 $} if that is how the string appeared when the file was checked in. This can be useful for binary file formats that cannot tolerate any changes to substrings that happen to take the form of keyword strings. @item -kv Generate only keyword values for keyword strings. For example, for the @code{Revision} keyword, generate the string @code{5.7} instead of @code{$@asis{}Revision: 5.7 $}. This can help generate files in programming languages where it is hard to strip keyword delimiters like @code{$@asis{}Revision: $} from a string. However, further keyword substitution cannot be performed once the keyword names are removed, so this option should be used with care. This option is always use by @code{cvs export}---@pxref{export}. @end table @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Log keyword @section Problems with the $@asis{}Log$ keyword. The @code{$@asis{}Log$} keyword is somewhat controversial. As long as you are working on your development system the information is easily accessible even if you do not use the @code{$@asis{}Log$} keyword---just do a @code{cvs log}. Once you export the file the history information might be useless anyhow. A more serious concern is that @sc{rcs} is not good at handling @code{$@asis{}Log$} entries when a branch is merged onto the main trunk. Conflicts often result from the merging operation. People also tend to "fix" the log entries in the file (correcting spelling mistakes and maybe even factual errors). If that is done the information from @code{cvs log} will not be consistent with the information inside the file. This may or may not be a problem in real life. It has been suggested that the @code{$@asis{}Log$} keyword should be inserted @emph{last} in the file, and not in the files header, if it is to be used at all. That way the long list of change messages will not interfere with everyday source file browsing. @c --------------------------------------------------------------------- @node Revision management @chapter Revision management @cindex Revision management @c -- This chapter could be expanded a lot. @c -- Experiences are very welcome! If you have read this far, you probably have a pretty good grasp on what @sc{cvs} can do for you. This chapter talks a little about things that you still have to decide. If you are doing development on your own using @sc{cvs} you could probably skip this chapter. The questions this chapter takes up become more important when more than one person is working in a repository. @menu * When to commit:: Some discussion on the subject @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node When to commit @section When to commit? @cindex When to commit @cindex Commit, when to @cindex Policy Your group should decide which policy to use regarding commits. Several policies are possible, and as your experience with @sc{cvs} grows you will probably find out what works for you. If you commit files too quickly you might commit files that do not even compile. If your partner updates his working sources to include your buggy file, he will be unable to compile the code. On the other hand, other persons will not be able to benefit from the improvements you make to the code if you commit very seldom, and conflicts will probably be more common. It is common to only commit files after making sure that they can be compiled. Some sites require that the files pass a test suite. Policies like this can be enforced using the commitinfo file (@pxref{commitinfo}), but you should think twice before you enforce such a convention. By making the development environment too controlled it might become too regimented and thus counter-productive to the real goal, which is to get software written. @c --------------------------------------------------------------------- @node Invoking CVS @appendix Reference manual for CVS commands @cindex Command reference @cindex Reference, commands @cindex Invoking CVS This appendix describes every subcommand of @sc{cvs} in detail. It also describes how to invoke CVS. @menu * Structure:: Overall structure of CVS commands * ~/.cvsrc:: Default options with the ~/.csvrc file * Global options:: Options you give to the left of cvs_command * Common options:: Options you give to the right of cvs_command * add:: Add a new file/directory to the repository * admin:: Administration front end for rcs * checkout:: Checkout sources for editing * commit:: Check files into the repository * diff:: Run diffs between revisions * export:: Export sources from CVS, similar to checkout * history:: Show status of files and users * import:: Import sources into CVS, using vendor branches * log:: Print out 'rlog' information for files * rdiff:: 'patch' format diffs between releases * release:: Indicate that a Module is no longer in use * remove:: Remove an entry from the repository * rtag:: Add a tag to a module * status:: Status info on the revisions * tag:: Add a tag to checked out version * update:: Bring work tree in sync with repository @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Structure @appendixsec Overall structure of CVS commands @cindex Structure @cindex CVS command structure @cindex Command structure @cindex Format of CVS commands The first release of @sc{cvs} consisted of a number of shell-scripts. Today @sc{cvs} is implemented as a single program that is a front-end to @sc{rcs} and @code{diff}. The overall format of all @sc{cvs} commands is: @example cvs [ cvs_options ] cvs_command [ command_options ] [ command_args ] @end example @table @code @item cvs The program that is a front-end to @sc{rcs}. @item cvs_options Some options that affect all sub-commands of @sc{cvs}. These are described below. @item cvs_command One of several different sub-commands. Some of the commands have aliases that can be used instead; those aliases are noted in the reference manual for that command. There are only two situations where you may omit @samp{cvs_command}: @samp{cvs -H} elicits a list of available commands, and @samp{cvs -v} displays version information on @sc{cvs} itself. @item command_options Options that are specific for the command. @item command_args Arguments to the commands. @end table There is unfortunately some confusion between @code{cvs_options} and @code{command_options}. @samp{-l}, when given as a @code{cvs_option}, only affects some of the commands. When it is given as a @code{command_option} is has a different meaning, and is accepted by more commands. In other words, do not take the above categorization too seriously. Look at the documentation instead. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node ~/.cvsrc @appendixsec Default options and the ~/.cvsrc file @cindex .cvsrc file @cindex option defaults There are some @code{command_options} that are used so often that you might have set up an alias or some other means to make sure you always specify that option. One example @footnote{being the one that drove the implementation of the .cvsrc support} is that many people find the default output of the @samp{diff} command to be very hard to read, and that either context diffs or unidiffs are much easier to understand. The @file{~/.cvsrc} file is a way that you can add default options to @code{cvs_commands} within cvs, instead of relying on aliases or other shell scripts. The format of the @file{~/.cvsrc} file is simple. The file is searched for a line that begins with the same name as the @code{cvs_command} being executed. If a match is found, then the remainder of the line is split up (at whitespace characters) into separate options and added to the command arguments @emph{before} any options from the command line. If a command has two names (e.g., @code{checkout} and @code{co}), only the name used on the command line will be used to match against the file. So if this is the contents of the user's @file{~/.cvsrc} file: @example log -N diff -u update -P co -P @end example @noindent the command @samp{cvs checkout foo} would not have the @samp{-P} option added to the arguments, while @samp{cvs co foo} would. With the example file above, the output from @samp{cvs diff foobar} will be in unidiff format. @samp{cvs diff -c foobar} will provide context diffs, as usual. Since @code{diff} doesn't have an option to specify use of the "old" format, you would need to use the @samp{-f} option to @samp{cvs} to turn off use of the @file{~/.cvsrc} options. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Global options @appendixsec Global options @cindex Options, global @cindex Global options @cindex Left-hand options The available @samp{cvs_options} (that are given to the left of @samp{cvs_command}) are: @table @code @cindex RCSBIN, overriding @cindex Overriding RCSBIN @item -b @var{bindir} Use @var{bindir} as the directory where @sc{rcs} programs are located. Overrides the setting of the @code{$RCSBIN} environment variable and any precompiled directory. This parameter should be specified as an absolute pathname. @cindex CVSROOT, overriding @cindex Overriding CVSROOT @item -d @var{cvs_root_directory} Use @var{cvs_root_directory} as the root directory pathname of the repository. Overrides the setting of the @code{$CVSROOT} environment variable. This parameter should be specified as an absolute pathname. @cindex EDITOR, overriding @cindex Overriding EDITOR @item -e @var{editor} Use @var{editor} to enter revision log information. Overrides the setting of the @code{$CVSEDITOR} and @code{$EDITOR} environment variables. @item -f Do not read the @file{~/.cvsrc} file. This option is most often used because of the non-orthogonality of the @sc{cvs} option set. For example, the @samp{cvs log} option @samp{-N} (turn off display of tag names) does not have a corresponding option to turn the display on. So if you have @samp{-N} in the @file{~/.cvsrc} entry for @samp{diff}, you may need to use @samp{-f} to show the tag names. @footnote{Yes, this really should be fixed, and it's being worked on} @item -H Display usage information about the specified @samp{cvs_command} (but do not actually execute the command). If you don't specify a command name, @samp{cvs -H} displays a summary of all the commands available. @item -l Do not log the cvs_command in the command history (but execute it anyway). @xref{history}, for information on command history. @cindex Read-only mode @item -n Do not change any files. Attempt to execute the @samp{cvs_command}, but only to issue reports; do not remove, update, or merge any existing files, or create any new files. @item -Q Cause the command to be really quiet; the command will only generate output for serious problems. @item -q Cause the command to be somewhat quiet; informational messages, such as reports of recursion through subdirectories, are suppressed. @cindex Read-only files @item -r Make new working files files read-only. Same effect as if the @code{$CVSREAD} environment variable is set (@pxref{Environment variables}). The default is to make working files writable. @cindex Trace @item -t Trace program execution; display messages showing the steps of @sc{cvs} activity. Particularly useful with @samp{-n} to explore the potential impact of an unfamiliar command. @item -v Display version and copyright information for @sc{cvs}. @cindex CVSREAD, overriding @cindex Overriding CVSREAD @item -w Make new working files read-write. Overrides the setting of the @code{$CVSREAD} environment variable. Files are created read-write by default, unless @code{$CVSREAD} is set or @samp{-r} is given. @end table @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Common options @appendixsec Common command options @cindex Common options @cindex Right-hand options This section describes the @samp{command_options} that are available across several @sc{cvs} commands. These options are always given to the right of @samp{cvs_command}. Not all commands support all of these options; each option is only supported for commands where it makes sense. However, when a command has one of these options you can almost always count on the same behavior of the option as in other commands. (Other command options, which are listed with the individual commands, may have different behavior from one @sc{cvs} command to the other). @strong{Warning:} the @samp{history} command is an exception; it supports many options that conflict even with these standard options. @table @code @cindex Dates @cindex Time @cindex Specifying dates @item -D @var{date_spec} Use the most recent revision no later than @var{date_spec}. @var{date_spec} is a single argument, a date description specifying a date in the past. The specification is @dfn{sticky} when you use it to make a private copy of a source file; that is, when you get a working file using @samp{-D}, @sc{cvs} records the date you specified, so that further updates in the same directory will use the same date (unless you explicitly override it; @pxref{update}). A wide variety of date formats are supported by the underlying @sc{rcs} facilities, similar to those described in co(1), but not exactly the same. The @var{date_spec} is interpreted as being in the local timezone, unless a specific timezone is specified. Examples of valid date specifications include: @example 1 month ago 2 hours ago 400000 seconds ago last year last Monday yesterday a fortnight ago 3/31/92 10:00:07 PST January 23, 1987 10:05pm 22:00 GMT @end example @samp{-D} is available with the @code{checkout}, @code{diff}, @code{export}, @code{history}, @code{rdiff}, @code{rtag}, and @code{update} commands. (The @code{history} command uses this option in a slightly different way; @pxref{history options}). Remember to quote the argument to the @samp{-D} flag so that your shell doesn't interpret spaces as argument separators. A command using the @samp{-D} flag can look like this: @example $ cvs diff -D "1 hour ago" cvs.texinfo @end example @cindex Forcing a tag match @item -f When you specify a particular date or tag to @sc{cvs} commands, they normally ignore files that do not contain the tag (or did not exist prior to the date) that you specified. Use the @samp{-f} option if you want files retrieved even when there is no match for the tag or date. (The most recent revision of the file will be used). @need 800 @samp{-f} is available with these commands: @code{checkout}, @code{export}, @code{rdiff}, @code{rtag}, and @code{update}. @strong{Warning:} The @code{commit} command also has a @samp{-f} option, but it has a different behavior for that command. @xref{commit options}. @item -H Help; describe the options available for this command. This is the only option supported for all @sc{cvs} commands. @item -k @var{kflag} Alter the default @sc{rcs} processing of keywords. @xref{Keyword substitution}, for the meaning of @var{kflag}. Your @var{kflag} specification is @dfn{sticky} when you use it to create a private copy of a source file; that is, when you use this option with the @code{checkout} or @code{update} commands, @sc{cvs} associates your selected @var{kflag} with the file, and continues to use it with future update commands on the same file until you specify otherwise. The @samp{-k} option is available with the @code{add}, @code{checkout}, @code{diff} and @code{update} commands. @item -l Local; run only in current working directory, rather than recursing through subdirectories. @strong{Warning:} this is not the same as the overall @samp{cvs -l} option, which you can specify to the left of a cvs command! Available with the following commands: @code{checkout}, @code{commit}, @code{diff}, @code{export}, @code{log}, @code{remove}, @code{rdiff}, @code{rtag}, @code{status}, @code{tag}, and @code{update}. @cindex Editor, avoiding invocation of @cindex Avoiding editor invocation @item -m @var{message} Use @var{message} as log information, instead of invoking an editor. Available with the following commands: @code{add}, @code{commit} and @code{import}. @item -n Do not run any checkout/commit/tag program. (A program can be specified to run on each of these activities, in the modules database (@pxref{modules}); this option bypasses it). @strong{Warning:} this is not the same as the overall @samp{cvs -n} option, which you can specify to the left of a cvs command! Available with the @code{checkout}, @code{commit}, @code{export}, and @code{rtag} commands. @item -P Prune (remove) directories that are empty after being updated, on @code{checkout}, or @code{update}. Normally, an empty directory (one that is void of revision-controlled files) is left alone. Specifying @samp{-P} will cause these directories to be silently removed from your checked-out sources. This does not remove the directory from the repository, only from your checked out copy. Note that this option is implied by the @samp{-r} or @samp{-D} options of @code{checkout} and @code{export}. @c -- implied-- @item -p Pipe the files retrieved from the repository to standard output, rather than writing them in the current directory. Available with the @code{checkout} and @code{update} commands. @item -W Specify file names that should be filtered. You can use this option repeatedly. The spec can be a file name pattern of the same type that you can specify in the @file{.cvswrappers} file. Avaliable with the following commands: @code{import}, and @code{update}. @item -r @var{tag} Use the revision specified by the @var{tag} argument instead of the default @dfn{head} revision. As well as arbitrary tags defined with the @code{tag} or @code{rtag} command, two special tags are always available: @samp{HEAD} refers to the most recent version available in the repository, and @samp{BASE} refers to the revision you last checked out into the current working directory. The tag specification is sticky when you use this option with @code{checkout} or @code{update} to make your own copy of a file: @sc{cvs} remembers the tag and continues to use it on future update commands, until you specify otherwise. The tag can be either a symbolic or numeric tag. @xref{Tags}. Specifying the @samp{-q} global option along with the @samp{-r} command option is often useful, to suppress the warning messages when the @sc{rcs} history file does not contain the specified tag. @strong{Warning:} this is not the same as the overall `cvs -r' option, which you can specify to the left of a cvs command! @samp{-r} is available with the @code{checkout}, @code{commit}, @code{diff}, @code{history}, @code{export}, @code{rdiff}, @code{rtag}, and @code{update} commands. @end table @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node add @appendixsec add---Add a new file/directory to the repository @cindex Add (subcommand) @itemize @bullet @item Synopsis: add [-k kflag] [-m 'message'] files@dots{} @item Requires: repository, working directory. @item Changes: working directory. @item Synonym: new @end itemize Use the @code{add} command to create a new file or directory in the source repository. The files or directories specified with @code{add} must already exist in the current directory (which must have been created with the @code{checkout} command). To add a whole new directory hierarchy to the source repository (for example, files received from a third-party vendor), use the @code{import} command instead. @xref{import}. If the argument to @code{add} refers to an immediate sub-directory, the directory is created at the correct place in the source repository, and the necessary @sc{cvs} administration files are created in your working directory. If the directory already exists in the source repository, @code{add} still creates the administration files in your version of the directory. This allows you to use @code{add} to add a particular directory to your private sources even if someone else created that directory after your checkout of the sources. You can do the following: @example $ mkdir new_directory $ cvs add new_directory $ cvs update new_directory @end example An alternate approach using @code{update} might be: @example $ cvs update -d new_directory @end example (To add any available new directories to your working directory, it's probably simpler to use @code{checkout} (@pxref{checkout}) or @samp{update -d} (@pxref{update})). The added files are not placed in the source repository until you use @code{commit} to make the change permanent. Doing an @code{add} on a file that was removed with the @code{remove} command will resurrect the file, unless a @code{commit} command intervened. @xref{remove examples} for an example. Unlike most other commands @code{add} never recurses down directories. It cannot yet handle relative paths. Instead of @example $ cvs add foo/bar.c @end example you have to do @example $ cd foo $ cvs add bar.c @end example @menu * add options:: add options * add examples:: add examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node add options @appendixsubsec add options @cindex Add options There are only two options you can give to @samp{add}: @table @code @item -k @var{kflag} This option specifies the default way that this file will be checked out. See rcs(1) and co(1). The @var{kflag} argument (@pxref{Substitution modes}) is stored in the @sc{rcs} file and can be changed with @code{admin -k} (@pxref{admin options}). Specifying @samp{-ko} is useful for checking in binaries that should not have the @sc{rcs} id strings expanded. @strong{Warning:} this option is reported to be broken in version 1.3 and 1.3-s2 of @sc{cvs}. Use @samp{admin -k} after the commit instead. @xref{admin examples}. @c -- broken-- @item -m @var{description} Using this option, you can give a description for the file. This description appears in the history log (if it is enabled, @pxref{history file}). It will also be saved in the @sc{rcs} history file inside the repository when the file is committed. The @code{log} command displays this description. The description can be changed using @samp{admin -t}. @xref{admin}. If you omit the @samp{-m @var{description}} flag, an empty string will be used. You will not be prompted for a description. @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node add examples @appendixsubsec add examples To add the file @file{backend.c} to the repository, with a description, the following can be used. @example $ cvs add -m "Optimizer and code generation passes." backend.c $ cvs commit -m "Early version. Not yet compilable." backend.c @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node admin @appendixsec admin---Administration front end for rcs @cindex Admin (subcommand) @itemize @bullet @item Requires: repository, working directory. @item Changes: repository. @item Synonym: rcs @end itemize This is the @sc{cvs} interface to assorted administrative @sc{rcs} facilities, documented in rcs(1). @code{admin} simply passes all its options and arguments to the @code{rcs} command; it does no filtering or other processing. This command @emph{does} work recursively, however, so extreme care should be used. @menu * admin options:: admin options * admin examples:: admin examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node admin options @appendixsubsec admin options Not all valid @code{rcs} options are useful together with @sc{cvs}. Some even makes it impossible to use @sc{cvs} until you undo the effect! This description of the available options is based on the @samp{rcs(1)} man page, but modified to suit readers that are more interrested in @sc{cvs} than @sc{rcs}. @table @code @item -A@var{oldfile} Might not work together with @sc{cvs}. Append the access list of @var{oldfile} to the access list of the @sc{rcs} file. @item -a@var{logins} Might not work together with @sc{cvs}. Append the login names appearing in the comma-separated list @var{logins} to the access list of the @sc{rcs} file. @item -b[@var{rev}] Breaks @sc{cvs}. When used with bare @sc{rcs}, this option sets the default branch to @var{rev}. If @var{rev} is omitted, the default branch is reset to the (dynamically) highest branch on the trunk. Use sticky tags instead, as in @code{cvs co -r}. @xref{Sticky tags}. @item -c@var{string} Useful with @sc{cvs}. Sets the comment leader to @var{string}. The comment leader is printed before every log message line generated by the keyword @code{$@asis{}Log$} (@pxref{Keyword substitution}). This is useful for programming languages without multi-line comments. @sc{Rcs} initially guesses the value of the comment leader from the file name extension when the file is first committed. @item -e[@var{logins}] Might not work together with @sc{cvs}. Erase the login names appearing in the comma-separated list @var{logins} from the access list of the RCS file. If @var{logins} is omitted, erase the entire access list. @item -I Run interactively, even if the standard input is not a terminal. @item -i Useless with @sc{cvs}. When using bare @sc{rcs}, this is used to create and initialize a new @sc{rcs} file, without depositing a revision. @item -k@var{subst} Useful with @sc{cvs}. Set the default keyword substitution to @var{subst}. @xref{Keyword substitution}. Giving an explicit @samp{-k} option to @code{cvs update} or @code{cvs checkout} overrides this default. @code{cvs export} always uses @code{-kv}, regardless of which keyword substitution is set with @code{cvs admin}. @item -l[@var{rev}] Probably useless with @sc{cvs}. With bare @sc{rcs}, this option can be used to lock the revision with number @var{rev}. If a branch is given, lock the latest revision on that branch. If @var{rev} is omitted, lock the latest revision on the default branch. @item -L Probably useless with @sc{cvs}. Used with bare @sc{rcs} to set locking to strict. Strict locking means that the owner of an RCS file is not exempt from locking for checkin. @cindex Changing a log message @cindex Replacing a log message @cindex Correcting a log message @cindex Fixing a log message @cindex Log message, correcting @item -m@var{rev}:@var{msg} Replace the log message of revision @var{rev} with @var{msg}. @item -N@var{name}[:[@var{rev}]] Act like @samp{-n}, except override any previous assignment of @var{name}. @item -n@var{name}[:[@var{rev}]] Associate the symbolic name @var{name} with the branch or revision @var{rev}. It is normally better to use @samp{cvs tag} or @samp{cvs rtag} instead. Delete the symbolic name if both @samp{:} and @var{rev} are omitted; otherwise, print an error message if @var{name} is already associated with another number. If @var{rev} is symbolic, it is expanded before association. A @var{rev} consisting of a branch number followed by a @samp{.} stands for the current latest revision in the branch. A @samp{:} with an empty @var{rev} stands for the current latest revision on the default branch, normally the trunk. For example, @samp{rcs -n@var{name}: RCS/*} associates @var{name} with the current latest revision of all the named RCS files; this contrasts with @samp{rcs -n@var{name}:$ RCS/*} which associates @var{name} with the revision numbers extracted from keyword strings in the corresponding working files. @cindex Deleting revisions @cindex Outdating revisions @cindex Saving space @item -o@var{range} Useful, but dangerous, with @sc{cvs} (see below). Deletes (@dfn{outdates}) the revisions given by @var{range}. A range consisting of a single revision number means that revision. A range consisting of a branch number means the latest revision on that branch. A range of the form @samp{@var{rev1}:@var{rev2}} means revisions @var{rev1} to @var{rev2} on the same branch, @samp{:@var{rev}} means from the beginning of the branch containing @var{rev} up to and including @var{rev}, and @samp{@var{rev}:} means from revision @var{rev} to the end of the branch containing @var{rev}. None of the outdated revisions may have branches or locks. Due to the way @sc{cvs} handles branches @var{rev} cannot be specified symbolically if it is a branch. @xref{Magic branch numbers}, for an explanation. Make sure that no-one has checked out a copy of the revision you outdate. Strange things will happen if he starts to edit it and tries to check it back in. For this reason, you should never use this option to take back a bogus commit unless you work alone. Instead, you should fix the file and commit a new revision. @item -q Run quietly; do not print diagnostics. @item -s@var{state}[:@var{rev}] Useful with @sc{cvs}. Set the state attribute of the revision @var{rev} to @var{state}. If @var{rev} is a branch number, assume the latest revision on that branch. If @var{rev} is omitted, assume the latest revision on the default branch. Any identifier is acceptable for @var{state}. A useful set of states is @samp{Exp} (for experimental), @samp{Stab} (for stable), and @samp{Rel} (for released). By default, the state of a new revision is set to @samp{Exp} when it is created. The state is visible in the output from @var{cvs log} (@pxref{log}), and in the @samp{$@asis{}Log$} and @samp{$@asis{}State$} keywords (@pxref{Keyword substitution}). @item -t[@var{file}] Useful with @sc{cvs}. Write descriptive text from the contents of the named @var{file} into the RCS file, deleting the existing text. The @var{file} pathname may not begin with @samp{-}. If @var{file} is omitted, obtain the text from standard input, terminated by end-of-file or by a line containing @samp{.} by itself. Prompt for the text if interaction is possible; see @samp{-I}. The descriptive text can be seen in the output from @samp{cvs log} (@pxref{log}). @item -t-@var{string} Similar to @samp{-t@var{file}}. Write descriptive text from the @var{string} into the @sc{rcs} file, deleting the existing text. @item -U Probably useless with @sc{cvs}. Used with bare @sc{rcs} to set locking to non-strict. Non-strict locking means that the owner of a file need not lock a revision for checkin. @item -u[@var{rev}] Probably useless with @sc{cvs}. With bare @sc{rcs}, unlock the revision with number @var{rev}. If a branch is given, unlock the latest revision on that branch. If @var{rev} is omitted, remove the latest lock held by the caller. Normally, only the locker of a revision may unlock it. Somebody else unlocking a revision breaks the lock. This causes a mail message to be sent to the original locker. The message contains a commentary solicited from the breaker. The commentary is terminated by end-of-file or by a line containing @code{.} by itself. @item -V@var{n} Emulate @sc{rcs} version @var{n}. Use -V@var{n} to make an @sc{rcs} file acceptable to @sc{rcs} version @var{n} by discarding information that would confuse version @var{n}. @item -x@var{suffixes} Useless with @sc{cvs}. Use @var{suffixes} to characterize RCS files. @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node admin examples @appendixsubsec admin examples @appendixsubsubsec Outdating is dangerous First, an example of how @emph{not} to use the @code{admin} command. It is included to stress the fact that this command can be quite dangerous unless you know @emph{exactly} what you are doing. The @samp{-o} option can be used to @dfn{outdate} old revisions from the history file. If you are short on disc this option might help you. But think twice before using it---there is no way short of restoring the latest backup to undo this command! The next line is an example of a command that you would @emph{not} like to execute. @example $ cvs admin -o:R_1_02 . @end example The above command will delete all revisions up to, and including, the revision that corresponds to the tag R_1_02. But beware! If there are files that have not changed between R_1_02 and R_1_03 the file will have @emph{the same} numerical revision number assigned to the tags R_1_02 and R_1_03. So not only will it be impossible to retrieve R_1_02; R_1_03 will also have to be restored from the tapes! @need 1200 @appendixsubsubsec Handling binary files @cindex Binary files (inhibit keyword expansion) @cindex Inhibiting keyword expansion @cindex Keyword expansion, inhibiting If you use @sc{cvs} to store binary files, where keyword strings (@pxref{Keyword substitution}) might accidentally appear inside the file, you should use @code{cvs admin -ko} to make sure that they are not modified automatically. Here is an example of how you can create a new file using the @samp{-ko} flag: @example $ echo '$@asis{}Id$' > kotest $ cvs add -m"A test file" kotest $ cvs ci -m"First checkin; contains a keyword" kotest $ cvs admin -ko kotest $ rm kotest $ cvs update kotest @end example When you check in the file @file{kotest} the keywords are expanded. (Try the above example, and do a @code{cat kotest} after every command!) The @code{cvs admin -ko} command sets the default keyword substitution method for this file, but it does not alter the working copy of the file that you have. The easiest way to get the unexpanded version of @file{kotest} is to remove it and check it out again. @appendixsubsubsec Comment leaders @cindex Comment leader @cindex Log keyword, selecting comment leader @cindex Nroff (selecting comment leader) If you use the @code{$@asis{}Log$} keyword and you do not agree with the guess for comment leader that @sc{cvs} has done, you can enforce your will with @code{cvs admin -c}. This might be suitable for @code{nroff} source: @example $ cvs admin -c'.\" ' *.man $ rm *.man $ cvs update @end example The two last steps are to make sure that you get the versions with correct comment leaders in your working files. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node checkout @appendixsec checkout---Check out sources for editing @cindex Checkout (subcommand) @cindex Co (subcommand) @itemize @bullet @item Synopsis: checkout [options] modules@dots{} @item Requires: repository. @item Changes: working directory. @item Synonyms: co, get @end itemize Make a working directory containing copies of the source files specified by @var{modules}. You must execute @code{checkout} before using most of the other @sc{cvs} commands, since most of them operate on your working directory. The @var{modules} part of the command are either symbolic names for some collection of source directories and files, or paths to directories or files in the repository. The symbolic names are defined in the @samp{modules} file. @xref{modules}. Depending on the modules you specify, @code{checkout} may recursively create directories and populate them with the appropriate source files. You can then edit these source files at any time (regardless of whether other software developers are editing their own copies of the sources); update them to include new changes applied by others to the source repository; or commit your work as a permanent change to the source repository. Note that @code{checkout} is used to create directories. The top-level directory created is always added to the directory where @code{checkout} is invoked, and usually has the same name as the specified module. In the case of a module alias, the created sub-directory may have a different name, but you can be sure that it will be a sub-directory, and that @code{checkout} will show the relative path leading to each file as it is extracted into your private work area (unless you specify the @samp{-Q} global option). Running @code{checkout} on a directory that was already built by a prior @code{checkout} is also permitted, and has the same effect as specifying the @samp{-d} option to the @code{update} command, that is, any new directories that have been created in the repository will appear in your work area. @xref{update}. @menu * checkout options:: checkout options * checkout examples:: checkout examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node checkout options @appendixsubsec checkout options These standard options are supported by @code{checkout} (@pxref{Common options}, for a complete description of them): @table @code @item -D @var{date} Use the most recent revision no later than @var{date}. This option is sticky, and implies @samp{-P}. @item -f Only useful with the @samp{-D @var{date}} or @samp{-r @var{tag}} flags. If no matching revision is found, retrieve the most recent revision (instead of ignoring the file). @item -k @var{kflag} Process @sc{rcs} keywords according to @var{kflag}. See co(1). This option is sticky; future updates of this file in this working directory will use the same @var{kflag}. The @code{status} command can be viewed to see the sticky options. @xref{status}. @item -l Local; run only in current working directory. @item -n Do not run any checkout program (as specified with the @samp{-o} option in the modules file; @pxref{modules}). @item -P Prune empty directories. @item -p Pipe files to the standard output. @item -r @var{tag} Use revision @var{tag}. This option is sticky, and implies @samp{-P}. @end table In addition to those, you can use these special command options with @code{checkout}: @table @code @item -A Reset any sticky tags, dates, or @samp{-k} options. (If you get a working file using one of the @samp{-r}, @samp{-D}, or @samp{-k} options, @sc{cvs} remembers the corresponding tag, date, or @var{kflag} and continues using it for future updates; use the @samp{-A} option to make @sc{cvs} forget these specifications, and retrieve the `head' revision of the file). @item -c Copy the module file, sorted, to the standard output, instead of creating or modifying any files or directories in your working directory. @item -d @var{dir} Create a directory called @var{dir} for the working files, instead of using the module name. Unless you also use @samp{-N}, the paths created under @var{dir} will be as short as possible. @item -j @var{tag} Merge the changes made between the resulting revision and the revision that it is based on (e.g., if @var{tag} refers to a branch, @sc{cvs} will merge all changes made on that branch into your working file). With two @samp{-j @var{tag}} options, @sc{cvs} will merge in the changes between the two respective revisions. This can be used to undo changes made between two revisions (@pxref{Merging two revisions}) in your working copy, or to move changes between different branches. In addition, each -j option can contain an optional date specification which, when used with branches, can limit the chosen revision to one within a specific date. An optional date is specified by adding a colon (:) to the tag. An example might be what @code{import} tells you to do when you have just imported sources that have conflicts with local changes: @example $ cvs checkout -jTAG:yesterday -jTAG module @end example @item -N Only useful together with @samp{-d @var{dir}}. With this option, @sc{cvs} will not shorten module paths in your working directory. (Normally, @sc{cvs} shortens paths as much as possible when you specify an explicit target directory). @item -s Like @samp{-c}, but include the status of all modules, and sort it by the status string. @xref{modules}, for info about the @samp{-s} option that is used inside the modules file to set the module status. @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node checkout examples @appendixsubsec checkout examples Get a copy of the module @samp{tc}: @example $ cvs checkout tc @end example Get a copy of the module @samp{tc} as it looked one day ago: @example $ cvs checkout -D yesterday tc @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node commit @appendixsec commit---Check files into the repository @cindex Commit (subcommand) @itemize @bullet @item Version 1.3 Synopsis: commit [-lnR] [-m 'log_message' | -f file] [-r revision] [files@dots{}] @item Version 1.3.1 Synopsis: commit [-lnRf] [-m 'log_message' | -F file] [-r revision] [files@dots{}] @c -- rename-f-F-- @item Requires: working directory, repository. @item Changes: repository. @item Synonym: ci @end itemize @strong{Warning:} The @samp{-f @var{file}} option will probably be renamed to @samp{-F @var{file}}, and @samp{-f} will be given a new behavior in future releases of @sc{cvs}. @c -- rename-f-F-- Use @code{commit} when you want to incorporate changes from your working source files into the source repository. If you don't specify particular files to commit, all of the files in your working current directory are examined. @code{commit} is careful to change in the repository only those files that you have really changed. By default (or if you explicitly specify the @samp{-R} option), files in subdirectories are also examined and committed if they have changed; you can use the @samp{-l} option to limit @code{commit} to the current directory only. @code{commit} verifies that the selected files are up to date with the current revisions in the source repository; it will notify you, and exit without committing, if any of the specified files must be made current first with @code{update} (@pxref{update}). @code{commit} does not call the @code{update} command for you, but rather leaves that for you to do when the time is right. When all is well, an editor is invoked to allow you to enter a log message that will be written to one or more logging programs (@pxref{modules}, and @pxref{loginfo}) and placed in the @sc{rcs} history file inside the repository. This log message can be retrieved with the @code{log} command; @xref{log}. You can specify the log message on the command line with the @samp{-m @var{message}} option, and thus avoid the editor invocation, or use the @samp{-f @var{file}} option to specify @c -- rename-f-F-- that the argument file contains the log message. @menu * commit options:: commit options * commit examples:: commit examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node commit options @appendixsubsec commit options These standard options are supported by @code{commit} (@pxref{Common options}, for a complete description of them): @table @code @item -l Local; run only in current working directory. @item -n Do not run any module program. @item -R Commit directories recursively. This is on by default. @item -r @var{revision} Commit to @var{revision}. @var{revision} must be either a branch, or a revision on the main trunk that is higher than any existing revision number. You cannot commit to a specific revision on a branch. @end table @code{commit} also supports these options: @table @code @item -F @var{file} This option is present in @sc{cvs} releases 1.3-s3 and later. Read the log message from @var{file}, instead of invoking an editor. @item -f @c -- rename-f-F-- This option is present in @sc{cvs} 1.3-s3 and later releases of @sc{cvs}. Note that this is not the standard behavior of the @samp{-f} option as defined in @xref{Common options}. Force @sc{cvs} to commit a new revision even if you haven't made any changes to the file. If the current revision of @var{file} is 1.7, then the following two commands are equivalent: @example $ cvs commit -f @var{file} $ cvs commit -r 1.8 @var{file} @end example @item -f @var{file} @c -- rename-f-F-- This option is present in @sc{cvs} releases 1.3, 1.3-s1 and 1.3-s2. Note that this is not the standard behavior of the @samp{-f} option as defined in @xref{Common options}. Read the log message from @var{file}, instead of invoking an editor. @item -m @var{message} Use @var{message} as the log message, instead of invoking an editor. @end table @need 2000 @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node commit examples @appendixsubsec commit examples @appendixsubsubsec New major release number When you make a major release of your product, you might want the revision numbers to track your major release number. You should normally not care about the revision numbers, but this is a thing that many people want to do, and it can be done without doing any harm. To bring all your files up to the @sc{rcs} revision 3.0 (including those that haven't changed), you might do: @example $ cvs commit -r 3.0 @end example Note that it is generally a bad idea to try to make the @sc{rcs} revision number equal to the current release number of your product. You should think of the revision number as an internal number that the @sc{cvs} package maintains, and that you generally never need to care much about. Using the @code{tag} and @code{rtag} commands you can give symbolic names to the releases instead. @xref{tag} and @xref{rtag}. Note that the number you specify with @samp{-r} must be larger than any existing revision number. That is, if revision 3.0 exists, you cannot @samp{cvs commit -r 1.3}. @appendixsubsubsec Committing to a branch You can commit to a branch revision (one that has an even number of dots) with the @samp{-r} option. To create a branch revision, use the @samp{-b} option of the @code{rtag} or @code{tag} commands (@pxref{tag} or @pxref{rtag}). Then, either @code{checkout} or @code{update} can be used to base your sources on the newly created branch. From that point on, all @code{commit} changes made within these working sources will be automatically added to a branch revision, thereby not disturbing main-line development in any way. For example, if you had to create a patch to the 1.2 version of the product, even though the 2.0 version is already under development, you might do: @example $ cvs rtag -b -r FCS1_2 FCS1_2_Patch product_module $ cvs checkout -r FCS1_2_Patch product_module $ cd product_module [[ hack away ]] $ cvs commit @end example @noindent This works automatically since the @samp{-r} option is sticky. @appendixsubsubsec Creating the branch after editing Say you have been working on some extremely experimental software, based on whatever revision you happened to checkout last week. If others in your group would like to work on this software with you, but without disturbing main-line development, you could commit your change to a new branch. Others can then checkout your experimental stuff and utilize the full benefit of @sc{cvs} conflict resolution. The scenario might look like: @example [[ hacked sources are present ]] $ cvs tag -b EXPR1 $ cvs update -r EXPR1 $ cvs commit @end example The @code{update} command will make the @samp{-r EXPR1} option sticky on all files. Note that your changes to the files will never be removed by the @code{update} command. The @code{commit} will automatically commit to the correct branch, because the @samp{-r} is sticky. You could also do like this: @example [[ hacked sources are present ]] $ cvs tag -b EXPR1 $ cvs commit -r EXPR1 @end example @noindent but then, only those files that were changed by you will have the @samp{-r EXPR1} sticky flag. If you hack away, and commit without specifying the @samp{-r EXPR1} flag, some files may accidentally end up on the main trunk. To work with you on the experimental change, others would simply do @example $ cvs checkout -r EXPR1 whatever_module @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node diff @appendixsec diff---Run diffs between revisions @cindex Diff (subcommand) @itemize @bullet @item Synopsis: diff [-l] [rcsdiff_options] [[-r rev1 | -D date1] [-r rev2 | -D date2]] [files@dots{}] @item Requires: working directory, repository. @item Changes: nothing. @end itemize The @code{diff} command is used to compare different revisions of files. The default action is to compare your working files with the revisions they were based on, and report any differences that are found. If any file names are given, only those files are compared. If any directories are given, all files under them will be compared. The exit status will be 0 if no differences were found, 1 if some differences were found, and 2 if any error occurred. @menu * diff options:: diff options * diff examples:: diff examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node diff options @appendixsubsec diff options These standard options are supported by @code{diff} (@pxref{Common options}, for a complete description of them): @table @code @item -D @var{date} Use the most recent revision no later than @var{date}. See @samp{-r} for how this affects the comparison. @sc{cvs} can be configured to pass the @samp{-D} option through to @code{rcsdiff} (which in turn passes it on to @code{diff}. @sc{Gnu} diff uses @samp{-D} as a way to put @code{cpp}-style @samp{#define} statements around the output differences. There is no way short of testing to figure out how @sc{cvs} was configured. In the default configuration @sc{cvs} will use the @samp{-D @var{date}} option. @item -k @var{kflag} Process @sc{rcs} keywords according to @var{kflag}. See co(1). @item -l Local; run only in current working directory. @item -R Examine directories recursively. This option is on by default. @item -r @var{tag} Compare with revision @var{tag}. Zero, one or two @samp{-r} options can be present. With no @samp{-r} option, the working file will be compared with the revision it was based on. With one @samp{-r}, that revision will be compared to your current working file. With two @samp{-r} options those two revisions will be compared (and your working file will not affect the outcome in any way). One or both @samp{-r} options can be replaced by a @samp{-D @var{date}} option, described above. @end table Any other options that are found are passed through to @code{rcsdiff}, which in turn passes them to @code{diff}. The exact meaning of the options depends on which @code{diff} you are using. The long options introduced in @sc{gnu} diff 2.0 are not yet supported in @sc{cvs}. See the documentation for your @code{diff} to see which options are supported. @c -- Document some common useful diff options, such as @c -u and -c. @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node diff examples @appendixsubsec diff examples The following line produces a Unidiff (@samp{-u} flag) between revision 1.14 and 1.19 of @file{backend.c}. Due to the @samp{-kk} flag no keywords are substituted, so differences that only depend on keyword substitution are ignored. @example $ cvs diff -kk -u -r 1.14 -r 1.19 backend.c @end example Suppose the experimental branch EXPR1 was based on a set of files tagged RELEASE_1_0. To see what has happened on that branch, the following can be used: @example $ cvs diff -r RELEASE_1_0 -r EXPR1 @end example A command like this can be used to produce a context diff between two releases: @example $ cvs diff -c -r RELEASE_1_0 -r RELEASE_1_1 > diffs @end example If you are maintaining ChangeLogs, a command like the following just before you commit your changes may help you write the ChangeLog entry. All local modifications that have not yet been committed will be printed. @example $ cvs diff -u | less @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node export @appendixsec export---Export sources from CVS, similar to checkout @cindex Export (subcommand) @itemize @bullet @item Synopsis: export [-flNnQq] -r rev|-D date [-d dir] module@dots{} @item Requires: repository. @item Changes: current directory. @end itemize This command is a variant of @code{checkout}; use it when you want a copy of the source for module without the @sc{cvs} administrative directories. For example, you might use @code{export} to prepare source for shipment off-site. This command requires that you specify a date or tag (with @samp{-D} or @samp{-r}), so that you can count on reproducing the source you ship to others. The keyword substitution option @samp{-kv} is always set when export is used. This causes any @sc{rcs} keywords to be expanded such that an import done at some other site will not lose the keyword revision information. There is no way to override this. Note that this breaks the @code{ident} command (which is part of the @sc{rcs} suite---see ident(1)) which looks for @sc{rcs} keyword strings. If you want to be able to use @code{ident} you must use @code{checkout} instead. @menu * export options:: export options @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node export options @appendixsubsec export options These standard options are supported by @code{export} (@pxref{Common options}, for a complete description of them): @table @code @item -D @var{date} Use the most recent revision no later than @var{date}. @item -f If no matching revision is found, retrieve the most recent revision (instead of ignoring the file). @item -l Local; run only in current working directory. @item -n Do not run any checkout program. @item -R Export directories recursively. This is on by default. @item -r @var{tag} Use revision @var{tag}. @end table In addition, these options (that are common to @code{checkout} and @code{export}) are also supported: @table @code @item -d @var{dir} Create a directory called @var{dir} for the working files, instead of using the module name. Unless you also use @samp{-N}, the paths created under @var{dir} will be as short as possible. @item -N Only useful together with @samp{-d @var{dir}}. With this option, @sc{cvs} will not shorten module paths in your working directory. (Normally, @sc{cvs} shortens paths as much as possible when you specify an explicit target directory.) @end table @ignore @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @c @node export examples @appendixsubsec export examples Contributed examples are gratefully accepted. @c -- Examples here!! @end ignore @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node history @appendixsec history---Show status of files and users @cindex History (subcommand) @itemize @bullet @item Synopsis: history [-report] [-flags] [-options args] [files@dots{}] @item Requires: the file @file{$CVSROOT/CVSROOT/history} @item Changes: nothing. @end itemize @sc{cvs} can keep a history file that tracks each use of the @code{checkout}, @code{commit}, @code{rtag}, @code{update}, and @code{release} commands. You can use @code{history} to display this information in various formats. Logging must be enabled by creating the file @file{$CVSROOT/CVSROOT/history}. @strong{Warning:} @code{history} uses @samp{-f}, @samp{-l}, @samp{-n}, and @samp{-p} in ways that conflict with the normal use inside @sc{cvs} (@pxref{Common options}). @menu * history options:: history options @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node history options @appendixsubsec history options Several options (shown above as @samp{-report}) control what kind of report is generated: @table @code @item -c Report on each time commit was used (i.e., each time the repository was modified). @item -e Everything (all record types); equivalent to specifying @samp{-xMACFROGWUT}. @item -m @var{module} Report on a particular module. (You can meaningfully use @samp{-m} more than once on the command line.) @item -o Report on checked-out modules. @item -T Report on all tags. @item -x @var{type} Extract a particular set of record types @var{type} from the @sc{cvs} history. The types are indicated by single letters, which you may specify in combination. Certain commands have a single record type: @table @code @item F release @item O checkout @item T rtag @end table @noindent One of four record types may result from an update: @table @code @item C A merge was necessary but collisions were detected (requiring manual merging). @item G A merge was necessary and it succeeded. @item U A working file was copied from the repository. @item W The working copy of a file was deleted during update (because it was gone from the repository). @end table @noindent One of three record types results from commit: @table @code @item A A file was added for the first time. @item M A file was modified. @item R A file was removed. @end table @end table The options shown as @samp{-flags} constrain or expand the report without requiring option arguments: @table @code @item -a Show data for all users (the default is to show data only for the user executing @code{history}). @item -l Show last modification only. @item -w Show only the records for modifications done from the same working directory where @code{history} is executing. @end table The options shown as @samp{-options @var{args}} constrain the report based on an argument: @table @code @item -b @var{str} Show data back to a record containing the string @var{str} in either the module name, the file name, or the repository path. @item -D @var{date} Show data since @var{date}. This is slightly different from the normal use of @samp{-D @var{date}}, which selects the newest revision older than @var{date}. @item -p @var{repository} Show data for a particular source repository (you can specify several @samp{-p} options on the same command line). @item -r @var{rev} Show records referring to revisions since the revision or tag named @var{rev} appears in individual @sc{rcs} files. Each @sc{rcs} file is searched for the revision or tag. @item -t @var{tag} Show records since tag @var{tag} was last added to the the history file. This differs from the @samp{-r} flag above in that it reads only the history file, not the @sc{rcs} files, and is much faster. @item -u @var{name} Show records for user @var{name}. @end table @ignore @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @c @node history examples @appendixsubsec history examples Contributed examples will gratefully be accepted. @c -- Examples here! @end ignore @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node import @appendixsec import---Import sources into CVS, using vendor branches @cindex Import (subcommand) @itemize @bullet @item Synopsis: import [-options] repository vendortag releasetag@dots{} @item Requires: Repository, source distribution directory. @item Changes: repository. @end itemize Use @code{import} to incorporate an entire source distribution from an outside source (e.g., a source vendor) into your source repository directory. You can use this command both for initial creation of a repository, and for wholesale updates to the module from the outside source. @xref{Tracking sources}, for a discussion on this subject. The @var{repository} argument gives a directory name (or a path to a directory) under the @sc{cvs} root directory for repositories; if the directory did not exist, import creates it. When you use import for updates to source that has been modified in your source repository (since a prior import), it will notify you of any files that conflict in the two branches of development; use @samp{checkout -j} to reconcile the differences, as import instructs you to do. By default, certain file names are ignored during @code{import}: names associated with @sc{cvs} administration, or with other common source control systems; common names for patch files, object files, archive files, and editor backup files; and other names that are usually artifacts of assorted utilities. Currently, the default list of ignored files includes files matching these names: @example RCSLOG RCS SCCS CVS* cvslog.* tags TAGS .make.state .nse_depinfo *~ #* .#* ,* *.old *.bak *.BAK *.orig *.rej .del-* *.a *.o *.so *.Z *.elc *.ln core @end example If the file @file{$CVSROOT/CVSROOT/cvsignore} exists, any files whose names match the specifications in that file will also be ignored. If the file @file{$CVSROOT/CVSROOT/cvswrappers} exists, any file whose names match the specifications in that file will be treated as packages and the appropriate filtering will be performed on the file/directory before being imported, @xref{Wrappers}. The outside source is saved in a first-level @sc{rcs} branch, by default 1.1.1. Updates are leaves of this branch; for example, files from the first imported collection of source will be revision 1.1.1.1, then files from the first imported update will be revision 1.1.1.2, and so on. At least three arguments are required. @var{repository} is needed to identify the collection of source. @var{vendortag} is a tag for the entire branch (e.g., for 1.1.1). You must also specify at least one @var{releasetag} to identify the files at the leaves created each time you execute @code{import}. @menu * import options:: import options * import examples:: import examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node import options @appendixsubsec import options This standard option is supported by @code{import} (@pxref{Common options}, for a complete description): @table @code @item -m @var{message} Use @var{message} as log information, instead of invoking an editor. @end table There are three additional special options. @table @code @item -b @var{branch} Specify a first-level branch other than 1.1.1. Unless the @samp{-b @var{branch}} flag is given, revisions will @emph{always} be made to the branch 1.1.1---even if a @var{vendortag} that matches another branch is given! What happens in that case, is that the tag will be reset to 1.1.1. Warning: This behavior might change in the future. @item -k @var{subst} Indicate the RCS keyword expansion mode desired. This setting will apply to all files created during the import, but not to any files that previously existed in the repository. See co(1) for a complete list of valid @samp{-k} settings. If you are checking in sources that contain @sc{rcs} keywords, and you wish those keywords to remain intact, use the @samp{-ko} flag when importing the files. This setting indicates that no keyword expansion is to be performed by @sc{rcs} when checking files out. It is also useful for checking in binaries. @item -I @var{name} Specify file names that should be ignored during import. You can use this option repeatedly. To avoid ignoring any files at all (even those ignored by default), specify `-I !'. @var{name} can be a file name pattern of the same type that you can specify in the @file{.cvsignore} file. @xref{cvsignore}. @c -- Is this really true? @item -W @var{spec} Specify file names that should be filtered during import. You can use this option repeatedly. @var{spec} can be a file name pattern of the same type that you can specify in the @file{.cvswrappers} file. @xref{Wrappers}. @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node import examples @appendixsubsec import examples @xref{Tracking sources}, and @xref{From files}. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node log @appendixsec log---Print out 'rlog' information for files @cindex Log (subcommand) @itemize @bullet @item Synopsis: log [-l] rlog-options [files@dots{}] @item Requires: repository, working directory. @item Changes: nothing. @item Synonym: rlog @end itemize Display log information for files. @code{log} calls the @sc{rcs} utility @code{rlog}, which prints all available information about the @sc{rcs} history file. This includes the location of the @sc{rcs} file, the @dfn{head} revision (the latest revision on the trunk), all symbolic names (tags) and some other things. For each revision, the revision number, the author, the number of lines added/deleted and the log message are printed. All times are displayed in Coordinated Universal Time (UTC). (Other parts of @sc{cvs} print times in the local timezone). @c -- timezone-- @menu * log options:: log options * log examples:: log examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node log options @appendixsubsec log options Only one option is interpreted by @sc{cvs} and not passed on to @code{rlog}: @table @code @item -l Local; run only in current working directory. (Default is to run recursively). @end table By default, @code{rlog} prints all information that is available. All other options (including those that normally behave differently) are passed through to @code{rlog} and restrict the output. See rlog(1) for a complete description of options. This incomplete list (which is a slightly edited extract from rlog(1)) lists all options that are useful in conjunction with @sc{cvs}. @strong{Please note:} There can be no space between the option and its argument, since @code{rlog} parses its options in a different way than @sc{cvs}. @table @code @item -b Print information about the revisions on the default branch, normally the highest branch on the trunk. @item -d@var{dates} Print information about revisions with a checkin date/time in the range given by the semicolon-separated list of dates. The following table explains the available range formats: @table @code @item @var{d1}<@var{d2} @itemx @var{d2}>@var{d1} Select the revisions that were deposited between @var{d1} and @var{d2} inclusive. @item <@var{d} @itemx @var{d}> Select all revisions dated @var{d} or earlier. @item @var{d}< @itemx >@var{d} Select all revisions dated @var{d} or later. @item @var{d} Select the single, latest revision dated @var{d} or earlier. @end table The date/time strings @var{d}, @var{d1}, and @var{d2} are in the free format explained in co(1). Quoting is normally necessary, especially for < and >. Note that the separator is a semicolon (;). @item -h Print only the @sc{rcs} pathname, working pathname, head, default branch, access list, locks, symbolic names, and suffix. @item -N Do not print the list of tags for this file. This option can be very useful when your site uses a lot of tags, so rather than "more"'ing over 3 pages of tag information, the log information is presented without tags at all. @item -R Print only the name of the @sc{rcs} history file. @item -r@var{revisions} Print information about revisions given in the comma-separated list @var{revisions} of revisions and ranges. The following table explains the available range formats: @table @code @item @var{rev1}:@var{rev2} Revisions @var{rev1} to @var{rev2} (which must be on the same branch). @item :@var{rev} Revisions from the beginning of the branch up to and including @var{rev}. @item @var{rev}: Revisions starting with @var{rev} to the end of the branch containing @var{rev}. @item @var{branch} An argument that is a branch means all revisions on that branch. You can unfortunately not specify a symbolic branch here. You must specify the numeric branch number. @xref{Magic branch numbers}, for an explanation. @item @var{branch1}:@var{branch2} A range of branches means all revisions on the branches in that range. @item @var{branch}. The latest revision in @var{branch}. @end table A bare @samp{-r} with no revisions means the latest revision on the default branch, normally the trunk. @item -s@var{states} Print information about revisions whose state attributes match one of the states given in the comma-separated list @var{states}. @item -t Print the same as @samp{-h}, plus the descriptive text. @item -w@var{logins} Print information about revisions checked in by users with login names appearing in the comma-separated list @var{logins}. If @var{logins} is omitted, the user's login is assumed. @end table @code{rlog} prints the intersection of the revisions selected with the options @samp{-d}, @samp{-l}, @samp{-s}, and @samp{-w}, intersected with the union of the revisions selected by @samp{-b} and @samp{-r}. @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node log examples @appendixsubsec log examples Contributed examples are gratefully accepted. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node rdiff @appendixsec rdiff---'patch' format diffs between releases @cindex Rdiff (subcommand) @itemize @bullet @item rdiff [-flags] [-V vn] [-r t|-D d [-r t2|-D d2]] modules@dots{} @item Requires: repository. @item Changes: nothing. @item Synonym: patch @end itemize Builds a Larry Wall format patch(1) file between two releases, that can be fed directly into the patch program to bring an old release up-to-date with the new release. (This is one of the few @sc{cvs} commands that operates directly from the repository, and doesn't require a prior checkout.) The diff output is sent to the standard output device. You can specify (using the standard @samp{-r} and @samp{-D} options) any combination of one or two revisions or dates. If only one revision or date is specified, the patch file reflects differences between that revision or date and the current head revisions in the @sc{rcs} file. Note that if the software release affected is contained in more than one directory, then it may be necessary to specify the @samp{-p} option to the patch command when patching the old sources, so that patch is able to find the files that are located in other directories. @menu * rdiff options:: rdiff options * rdiff examples:: rdiff examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node rdiff options @appendixsubsec rdiff options These standard options are supported by @code{rdiff} (@pxref{Common options}, for a complete description of them): @table @code @item -D @var{date} Use the most recent revision no later than @var{date}. @item -f If no matching revision is found, retrieve the most recent revision (instead of ignoring the file). @item -l Local; don't descend subdirectories. @item -r @var{tag} Use revision @var{tag}. @end table In addition to the above, these options are available: @table @code @item -c Use the context diff format. This is the default format. @item -s Create a summary change report instead of a patch. The summary includes information about files that were changed or added between the releases. It is sent to the standard output device. This is useful for finding out, for example, which files have changed between two dates or revisions. @item -t A diff of the top two revisions is sent to the standard output device. This is most useful for seeing what the last change to a file was. @item -u Use the unidiff format for the context diffs. This option is not available if your diff does not support the unidiff format. Remember that old versions of the @code{patch} program can't handle the unidiff format, so if you plan to post this patch to the net you should probably not use @samp{-u}. @item -V @var{vn} Expand @sc{rcs} keywords according to the rules current in @sc{rcs} version @var{vn} (the expansion format changed with @sc{rcs} version 5). @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node rdiff examples @appendixsubsec rdiff examples Suppose you receive mail from @t{foo@@bar.com} asking for an update from release 1.2 to 1.4 of the tc compiler. You have no such patches on hand, but with @sc{cvs} that can easily be fixed with a command such as this: @example $ cvs rdiff -c -r FOO1_2 -r FOO1_4 tc | \ $$ Mail -s 'The patches you asked for' foo@@bar.com @end example Suppose you have made release 1.3, and forked a branch called @samp{R_1_3fix} for bugfixes. @samp{R_1_3_1} corresponds to release 1.3.1, which was made some time ago. Now, you want to see how much development has been done on the branch. This command can be used: @example $ cvs patch -s -r R_1_3_1 -r R_1_3fix module-name cvs rdiff: Diffing module-name File ChangeLog,v changed from revision 1.52.2.5 to 1.52.2.6 File foo.c,v changed from revision 1.52.2.3 to 1.52.2.4 File bar.h,v changed from revision 1.29.2.1 to 1.2 @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node release @appendixsec release---Indicate that a Module is no longer in use @cindex Release (subcommand) @itemize @bullet @item release [-dQq] modules@dots{} @item Requires: Working directory. @item Changes: Working directory, history log. @end itemize This command is meant to safely cancel the effect of @samp{cvs checkout}. Since @sc{cvs} doesn't lock files, it isn't strictly necessary to use this command. You can always simply delete your working directory, if you like; but you risk losing changes you may have forgotten, and you leave no trace in the @sc{cvs} history file (@pxref{history file}) that you've abandoned your checkout. Use @samp{cvs release} to avoid these problems. This command checks that no uncommitted changes are present; that you are executing it from immediately above a @sc{cvs} working directory; and that the repository recorded for your files is the same as the repository defined in the module database. If all these conditions are true, @samp{cvs release} leaves a record of its execution (attesting to your intentionally abandoning your checkout) in the @sc{cvs} history log. @menu * release options:: release options * release output:: release options * release examples:: release examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node release options @appendixsubsec release options The @code{release} command supports one command option: @table @code @item -d Delete your working copy of the file if the release succeeds. If this flag is not given your files will remain in your working directory. @strong{Warning:} The @code{release} command uses @samp{rm -r @file{module}} to delete your file. This has the very serious side-effect that any directory that you have created inside your checked-out sources, and not added to the repository (using the @code{add} command; @pxref{add}) will be silently deleted---even if it is non-empty! @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node release output @appendixsubsec release output Before @code{release} releases your sources it will print a one-line message for any file that is not up-to-date. @strong{Warning:} Any new directories that you have created, but not added to the @sc{cvs} directory hierarchy with the @code{add} command (@pxref{add}) will be silently ignored (and deleted, if @samp{-d} is specified), even if they contain files. @table @code @item U @var{file} There exists a newer revision of this file in the repository, and you have not modified your local copy of the file. @item A @var{file} The file has been added to your private copy of the sources, but has not yet been committed to the repository. If you delete your copy of the sources this file will be lost. @item R @var{file} The file has been removed from your private copy of the sources, but has not yet been removed from the repository, since you have not yet committed the removal. @xref{commit}. @item M @var{file} The file is modified in your working directory. There might also be a newer revision inside the repository. @item ? @var{file} @var{file} is in your working directory, but does not correspond to anything in the source repository, and is not in the list of files for @sc{cvs} to ignore (see the description of the @samp{-I} option, and @pxref{cvsignore}). If you remove your working sources, this file will be lost. Note that no warning message like this is printed for spurious directories that @sc{cvs} encounters. The directory, and all its contents, are silently ignored. @c FIXME -- this should be fixed for CVS 1.4 @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node release examples @appendixsubsec release examples Release the module, and delete your local working copy of the files. @example $ cd .. # @r{You must stand immediately above the} # @r{sources when you issue @samp{cvs release}.} $ cvs release -d tc You have [0] altered files in this repository. Are you sure you want to release (and delete) module `tc': y $ @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node remove @appendixsec remove---Remove an entry from the repository @cindex Remove (subcommand) @itemize @bullet @item remove [-lR] [files@dots{}] @item Requires: Working directory. @item Changes: Working directory. @item Synonyms: rm, delete @end itemize Use this command to declare that you wish to remove files from the source repository. Like most @sc{cvs} commands, @samp{cvs remove} works on files in your working directory, not directly on the repository. As a safeguard, it also requires that you first erase the specified files from your working directory. The files are not actually removed until you apply your changes to the repository with @code{commit}; at that point, the corresponding @sc{rcs} files in the source repository are moved into the @file{Attic} directory (also within the source repository). This command is recursive by default, scheduling all physically removed files that it finds for removal by the next commit. Use the @samp{-l} option to avoid this recursion, or just specify the actual files that you wish removed. @menu * remove options:: remove options * remove examples:: remove examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node remove options @appendixsubsec remove options Two of the standard options are the only options supported by @code{remove}. @table @code @item -l Local; run only in current working directory. @item -R Commit directories recursively. This is on by default. @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node remove examples @appendixsubsec remove examples @appendixsubsubsec Remove a couple of files. @example $ cd test $ rm ?.c $ cvs remove cvs remove: Removing . cvs remove: scheduling a.c for removal cvs remove: scheduling b.c for removal cvs remove: use 'cvs commit' to remove these files permanently $ cvs ci -m "Removed unneeded files" cvs commit: Examining . cvs commit: Committing . @end example @appendixsubsubsec Resurrecting removed files If you change your mind you can easily resurrect the file before you commit it, using the @code{add} command. @example $ ls CVS ja.h oj.c $ rm oj.c $ cvs remove oj.c cvs remove: scheduling oj.c for removal cvs remove: use 'cvs commit' to remove this file permanently $ cvs add oj.c U oj.c cvs add: oj.c, version 1.1.1.1, resurrected @end example If you realize your mistake before you run the @code{remove} command you can use @code{update} to resurrect the file: @example $ rm oj.c $ cvs update oj.c cvs update: warning: oj.c was lost U oj.c @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node rtag @appendixsec rtag---Add a tag to the RCS file @cindex Rtag (subcommand) @itemize @bullet @item rtag [-falnRQq] [-b] [-d] [-r tag | -Ddate] symbolic_tag modules@dots{} @item Requires: repository. @item Changes: repository. @item Synonym: rfreeze @end itemize You can use this command to assign symbolic tags to particular, explicitly specified source revisions in the repository. @code{rtag} works directly on the repository contents (and requires no prior checkout). Use @code{tag} instead (@pxref{tag}), to base the selection of revisions on the contents of your working directory. If you attempt to use a tag name that already exists, @sc{cvs} will complain and not overwrite that tag. Use the @samp{-F} option to force the new tag value. @menu * rtag options:: rtag options @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node rtag options @appendixsubsec rtag options These standard options are supported by @code{rtag} (@pxref{Common options}, for a complete description of them): @table @code @item -D @var{date} Tag the most recent revision no later than @var{date}. @item -f Only useful with the @samp{-D @var{date}} or @samp{-r @var{tag}} flags. If no matching revision is found, use the most recent revision (instead of ignoring the file). @item -F Overwrite an existing tag of the same name on a different revision. This option is new in @sc{cvs} 1.4. The old behavior is matched by @samp{cvs tag -F}. @item -l Local; run only in current working directory. @item -n Do not run any tag program that was specified with the @samp{-t} flag inside the @file{modules} file. (@pxref{modules}). @item -R Commit directories recursively. This is on by default. @item -r @var{tag} Only tag those files that contain @var{tag}. This can be used to rename a tag: tag only the files identified by the old tag, then delete the old tag, leaving the new tag on exactly the same files as the old tag. @end table In addition to the above common options, these options are available: @table @code @item -a Use the @samp{-a} option to have @code{rtag} look in the @file{Attic} (@pxref{Removing files}) for removed files that contain the specified tag. The tag is removed from these files, which makes it convenient to re-use a symbolic tag as development continues (and files get removed from the up-coming distribution). @item -b Make the tag a branch tag. @xref{Branches}. @item -d Delete the tag instead of creating it. In general, tags (often the symbolic names of software distributions) should not be removed, but the @samp{-d} option is available as a means to remove completely obsolete symbolic names if necessary (as might be the case for an Alpha release, or if you mistagged a module). @end table @ignore @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @c @node rtag examples @appendixsubsec rtag examples @c -- Examples here! @end ignore @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node status @appendixsec status---Status info on the revisions @cindex Status (subcommand) @itemize @bullet @item status [-lR] [-v] [files@dots{}] @item Requires: working directory, repository. @item Changes: nothing. @end itemize Display a brief report on the current status of files with respect to the source repository, including any sticky tags, dates, or @samp{-k} options. You can also use this command to determine the potential impact of a @samp{cvs update} on your working source directory---but remember that things might change in the repository before you run @code{update}. @menu * status options:: status options @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node status options @appendixsubsec status options These standard options are supported by @code{status} (@pxref{Common options}, for a complete description of them): @table @code @item -l Local; run only in current working directory. @item -R Commit directories recursively. This is on by default. @end table There is one additional option: @table @code @item -v Verbose. In addition to the information normally displayed, print all symbolic tags, together with the numerical value of the revision or branch they refer to. @end table @ignore @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @c @node status examples @appendixsubsec status examples @c -- FIXME @end ignore @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node tag @appendixsec tag---Add a symbolic tag to checked out version of RCS file @c -- //////// - unnecessary. Also @c -- in a lot of other @c -- places. @cindex Tag (subcommand) @itemize @bullet @item tag [-lQqR] [-b] [-d] symbolic_tag [files@dots{}] @item Requires: working directory, repository. @item Changes: repository. @item Synonym: freeze @end itemize Use this command to assign symbolic tags to the nearest repository versions to your working sources. The tags are applied immediately to the repository, as with @code{rtag}, but the versions are supplied implicitly by the @sc{cvs} records of your working files' history rather than applied explicitly. One use for tags is to record a snapshot of the current sources when the software freeze date of a project arrives. As bugs are fixed after the freeze date, only those changed sources that are to be part of the release need be re-tagged. The symbolic tags are meant to permanently record which revisions of which files were used in creating a software distribution. The @code{checkout} and @code{update} commands allow you to extract an exact copy of a tagged release at any time in the future, regardless of whether files have been changed, added, or removed since the release was tagged. This command can also be used to delete a symbolic tag, or to create a branch. See the options section below. If you attempt to use a tag name that already exists, @sc{cvs} will complain and not overwrite that tag. Use the @samp{-F} option to force the new tag value. @menu * tag options:: tag options @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node tag options @appendixsubsec tag options These standard options are supported by @code{tag} (@pxref{Common options}, for a complete description of them): @table @code @item -F Overwrite an existing tag of the same name on a different revision. This option is new in @sc{cvs} 1.4. The old behavior is matched by @samp{cvs tag -F}. @item -l Local; run only in current working directory. @item -R Commit directories recursively. This is on by default. @end table Two special options are available: @table @code @item -b The -b option makes the tag a branch tag (@pxref{Branches}), allowing concurrent, isolated development. This is most useful for creating a patch to a previously released software distribution. @item -d Delete a tag. If you use @samp{cvs tag -d symbolic_tag}, the symbolic tag you specify is deleted instead of being added. Warning: Be very certain of your ground before you delete a tag; doing this permanently discards some historical information, which may later turn out to be valuable. @end table @ignore @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @c @node tag examples @appendixsubsec tag examples @c -- FIXME @end ignore @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node update @appendixsec update---Bring work tree in sync with repository @cindex Update (subcommand) @itemize @bullet @item update [-AdflPpQqR] [-d] [-r tag|-D date] files@dots{} @item Requires: repository, working directory. @item Changes: working directory. @end itemize After you've run checkout to create your private copy of source from the common repository, other developers will continue changing the central source. From time to time, when it is convenient in your development process, you can use the @code{update} command from within your working directory to reconcile your work with any revisions applied to the source repository since your last checkout or update. @menu * update options:: update options * update output:: update output * update examples:: update examples @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node update options @appendixsubsec update options These standard options are available with @code{update} (@pxref{Common options}, for a complete description of them): @table @code @item -D date Use the most recent revision no later than @var{date}. This option is sticky, and implies @samp{-P}. @item -f Only useful with the @samp{-D @var{date}} or @samp{-r @var{tag}} flags. If no matching revision is found, retrieve the most recent revision (instead of ignoring the file). @item -k @var{kflag} Process @sc{rcs} keywords according to @var{kflag}. See co(1). This option is sticky; future updates of this file in this working directory will use the same @var{kflag}. The @code{status} command can be viewed to see the sticky options. @xref{status}. @item -l Local; run only in current working directory. @item -P Prune empty directories. @item -p Pipe files to the standard output. @item -R Commit directories recursively. This is on by default. @item -r tag Retrieve revision @var{tag}. This option is sticky, and implies @samp{-P}. @end table @need 800 These special options are also available with @code{update}. @table @code @item -A Reset any sticky tags, dates, or @samp{-k} options. (If you get a working copy of a file by using one of the @samp{-r}, @samp{-D}, or @samp{-k} options, @sc{cvs} remembers the corresponding tag, date, or @var{kflag} and continues using it on future updates; use the @samp{-A} option to make @sc{cvs} forget these specifications, and retrieve the head revision of the file). @item -d Create any directories that exist in the repository if they're missing from the working directory. Normally, @code{update} acts only on directories and files that were already enrolled in your working directory. This is useful for updating directories that were created in the repository since the initial checkout; but it has an unfortunate side effect. If you deliberately avoided certain directories in the repository when you created your working directory (either through use of a module name or by listing explicitly the files and directories you wanted on the command line), then updating with @samp{-d} will create those directories, which may not be what you want. @item -I @var{name} Ignore files whose names match @var{name} (in your working directory) during the update. You can specify @samp{-I} more than once on the command line to specify several files to ignore. By default, @code{update} ignores files whose names match any of the following: @example RCSLOG RCS SCCS CVS* cvslog.* tags TAGS .make.state .nse_depinfo *~ #* .#* ,* *.old *.bak *.BAK *.orig *.rej .del-* *.a *.o *.so *.Z *.elc *.ln core @end example Use @samp{-I !} to avoid ignoring any files at all. @xref{cvsignore}, for other ways to make @sc{cvs} ignore some files. @item -W@var{spec} Specify file names that should be filtered during update. You can use this option repeatedly. @var{spec} can be a file name pattern of the same type that you can specify in the @file{.cvswrappers} file. @xref{Wrappers}. @item -j@var{branch} Merge the changes made between the resulting revision and the revision that it is based on (e.g., if the tag refers to a branch, @sc{cvs} will merge all changes made in that branch into your working file). With two @samp{-j} options, @sc{cvs} will merge in the changes between the two respective revisions. This can be used to remove a certain delta from your working file; if the file @file{foo.c} is based on revision 1.6 and you want to remove the changes made between 1.3 and 1.5, you might do: @example $ cvs update -j1.5 -j1.3 foo.c # @r{note the order@dots{}} @end example In addition, each -j option can contain an optional date specification which, when used with branches, can limit the chosen revision to one within a specific date. An optional date is specified by adding a colon (:) to the tag: @samp{-j@var{Symbolic_Tag}:@var{Date_Specifier}}. @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node update output @appendixsubsec update output @code{update} keeps you informed of its progress by printing a line for each file, preceded by one character indicating the status of the file: @table @code @item U @var{file} The file was brought up to date with respect to the repository. This is done for any file that exists in the repository but not in your source, and for files that you haven't changed but are not the most recent versions available in the repository. @item A @var{file} The file has been added to your private copy of the sources, and will be added to the source repository when you run @code{commit} on the file. This is a reminder to you that the file needs to be committed. @item R @var{file} The file has been removed from your private copy of the sources, and will be removed from the source repository when you run @code{commit} on the file. This is a reminder to you that the file needs to be committed. @item M @var{file} The file is modified in your working directory. @samp{M} can indicate one of two states for a file you're working on: either there were no modifications to the same file in the repository, so that your file remains as you last saw it; or there were modifications in the repository as well as in your copy, but they were merged successfully, without conflict, in your working directory. @sc{cvs} will print some messages if it merges your work, and a backup copy of your working file (as it looked before you ran @code{update}) will be made. The exact name of that file is printed while @code{update} runs. @item C @var{file} A conflict was detected while trying to merge your changes to @var{file} with changes from the source repository. @var{file} (the copy in your working directory) is now the output of the rcsmerge(1) command on the two revisions; an unmodified copy of your file is also in your working directory, with the name @file{.#@var{file}.@var{revision}} where @var{revision} is the @sc{rcs} revision that your modified file started from. (Note that some systems automatically purge files that begin with @file{.#} if they have not been accessed for a few days. If you intend to keep a copy of your original file, it is a very good idea to rename it.) @item ? @var{file} @var{file} is in your working directory, but does not correspond to anything in the source repository, and is not in the list of files for @sc{cvs} to ignore (see the description of the @samp{-I} option, and @pxref{cvsignore}). Note that no warning message like this is printed for spurious directories that @sc{cvs} encounters. The directory, and all its contents, are silently ignored. @end table @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node update examples @appendixsubsec update examples The following line will display all files which are not up-to-date without actually change anything in your working directory. It can be used to check what has been going on with the project. @example $ cvs -n -q update @end example @c --------------------------------------------------------------------- @node Administrative files @appendix Reference manual for the Administrative files @cindex Administrative files (reference) @cindex Files, reference manual @cindex Reference manual (files) @cindex CVSROOT (file) Inside the repository, in the directory @file{$CVSROOT/CVSROOT}, there are a number of supportive files for @sc{cvs}. You can use @sc{cvs} in a limited fashion without any of them, but if they are set up properly they can help make life easier. The most important of these files is the @file{modules} file, which defines the modules inside the repository. @menu * modules:: Defining modules * Wrappers:: Treat directories as files * commit files:: The commit support files * commitinfo:: Pre-commit checking * editinfo:: Specifying how log messages are created * loginfo:: Where should log messages be sent? * rcsinfo:: Templates for the log messages * cvsignore:: Ignoring files via cvsignore * history file:: History information * Setting up:: Setting up the repository @end menu @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node modules @appendixsec The modules file @cindex Modules (admin file) @cindex Defining modules (reference manual) The @file{modules} file records your definitions of names for collections of source code. @sc{cvs} will use these definitions if you create a file with the right format in @file{$CVSROOT/CVSROOT/modules,v}. The mkmodules(1) command should be run whenever the modules file changes, so that the appropriate files can be generated (depending on how you have configured @sc{cvs} operation). To allow convenient editing of the @file{modules} file itself, the file should include an entry like the following (where @var{localbin} represents the directory where your site installs programs like mkmodules(1)): @example modules -i /@var{localbin}/mkmodules CVSROOT modules @end example @noindent This defines the name @samp{modules} as the module name for the file itself, so that you can use @example $ cvs checkout modules @end example @noindent to get a copy of the file that you can edit. You should define similar module entries for the other configuration files described in this appendix, except @file{history}). The @file{modules} file may contain blank lines and comments (lines beginning with @samp{#}) as well as module definitions. Long lines can be continued on the next line by specifying a backslash (@samp{\}) as the last character on the line. A module definition is a single line of the @file{modules} file, in either of two formats. In both cases, @var{mname} represents the symbolic module name, and the remainder of the line is its definition. @table @code @item @var{mname} -a @var{aliases}@dots{} This represents the simplest way of defining a module @var{mname}. The @samp{-a} flags the definition as a simple alias: @sc{cvs} will treat any use of @var{mname} (as a command argument) as if the list of names @var{aliases} had been specified instead. @var{aliases} may contain either other module names or paths. When you use paths in aliases, @code{checkout} creates all intermediate directories in the working directory, just as if the path had been specified explicitly in the @sc{cvs} arguments. @item @var{mname} [ options ] @var{dir} [ @var{files}@dots{} ] [ &@var{module}@dots{} ] In the simplest case, this form of module definition reduces to @samp{@var{mname} @var{dir}}. This defines all the files in directory @var{dir} as module mname. @var{dir} is a relative path (from @code{$CVSROOT}) to a directory of source in the source repository. In this case, on checkout, a single directory called @var{mname} is created as a working directory; no intermediate directory levels are used by default, even if @var{dir} was a path involving several directory levels. By explicitly specifying files in the module definition after @var{dir}, you can select particular files from directory @var{dir}. The sample definition for @samp{modules} is an example of a module defined with a single file from a particular directory. Here is another example: @example m4test unsupported/gnu/m4 foreach.m4 forloop.m4 @end example @noindent With this definition, executing @samp{cvs checkout m4test} will create a single working directory @file{m4test} containing the two files listed, which both come from a common directory several levels deep in the @sc{cvs} source repository. A module definition can refer to other modules by including @samp{&@var{module}} in its definition. @code{checkout} creates a subdirectory for each such module, in your working directory. @c -- Nope. "in your working directory" is wrong. What @c -- is right? @table @code @item -d @var{name} Name the working directory something other than the module name. @cindex Checkin program @item -i @var{prog} Specify a program @var{prog} to run whenever files in a module are committed. @var{prog} runs with a single argument, the full pathname of the affected directory in a source repository. The @file{commitinfo}, @file{loginfo}, and @file{editinfo} files provide other ways to call a program on commit. @cindex Checkout program @item -o @var{prog} Specify a program @var{prog} to run whenever files in a module are checked out. @var{prog} runs with a single argument, the module name. @cindex Status of a module @cindex Module status @item -s @var{status} Assign a status to the module. When the module file is printed with @samp{cvs checkout -s} the modules are sorted according to primarily module status, and secondarily according to the module name. This option has no other meaning. You can use this option for several things besides status: for instance, list the person that is responsible for this module. @cindex Tag program @item -t @var{prog} Specify a program @var{prog} to run whenever files in a module are tagged with @code{rtag}. @var{prog} runs with two arguments: the module name and the symbolic tag specified to @code{rtag}. There is no way to specify a program to run when @code{tag} is executed. @cindex Update program @item -u @var{prog} Specify a program @var{prog} to run whenever @samp{cvs update} is executed from the top-level directory of the checked-out module. @var{prog} runs with a single argument, the full path to the source repository for this module. @end table @end table @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Wrappers @appendixsec The cvswrappers file @cindex cvswrappers (admin file) @cindex CVSWRAPPERS, environment variable @cindex Wrappers Wrappers are essentially directories that are to be treated as "files." This package allows such wrappers to be "processed" on the way in and out of CVS. The intended use is to wrap up a wrapper into a single tar, such that that tar can be treated as a single binary file in CVS. Apparently this is particularly useful on NEXTSTEP. To solve the problem effectively, it was also necessary to be able to prevent rcsmerge application at appropriate times. The file @file{cvswrappers} defines the script that will be run on a file when its name matches a regular expresion. There are two scripts that can be run on a file or directory. @c FIXME: Is this talking about comb and uncom? If so, @c mention them by name A script to filter the directory/file before it gets checked in and another that is run when the file/directory gets checked out. The @file{cvswrappers} also specifies the merge methodology that should be used when the file is updated, that is should a MERGE or a straight COPY of the diferences be used when checking into the repository. The basic format of the file @file{cvswrappers} is given as such: @example wildcard [option value][option value]... where option is one of -f from cvs filter value: path tofilter -t to cvs filter value: path to filter -m update methodology value: MERGE or COPY and value is a single-quote delimited value. @end example @example *.nib -f 'uncom %s' -t 'comb %s %s' -m 'COPY' *.rtfd -f 'uncom %s' -t 'comb %s %s' -m 'COPY' @end example @noindent The above example of a @file{cvswrappers} file states that all files/directories that end with a @code{.nib} should be filtered with the @file{comb} program before checking the file into the repository. The file should be filtered though the @file{uncom} program when the file is checked out of the repository. The @file{cvswrappers} file also states that a @code{COPY} methodology should be used when updating the files in the repository (that is no merging should be performed). @noindent The @file{comb} filter is called with two arguments, the first is the name of the file/directory to filter and the second is the pathname to where the resulting filtered file should be placed. @noindent The @file{uncom} filter is called with one argument, which is the name of the file to filter from. The end result of the @file{uncom} filter will be a file/directory in the users current working directory, that represents the source before being filtered. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node commit files @appendixsec The commit support files @cindex Commit files The @samp{-i} flag in the @file{modules} file can be used to run a certain program whenever files are committed (@pxref{modules}). The files described in this section provide other, more flexible, ways to run programs whenever something is committed. There are three kind of programs that can be run on commit. They are specified in files in the repository, as described below. The following table summarizes the file names and the purpose of the corresponding programs. @table @file @item commitinfo The program is responsible for checking that the commit is allowed. If it exits with a non-zero exit status the commit will be aborted. @item editinfo The specified program is used to edit the log message, and possibly verify that it contains all required fields. This is most useful in combination with the @file{rcsinfo} file, which can hold a log message template (@pxref{rcsinfo}). @item loginfo The specified program is called when the commit is complete. It receives the log message and some additional information and can store the log message in a file, or mail it to appropriate persons, or maybe post it to a local newsgroup, or@dots{} Your imagination is the limit! @end table @menu * syntax:: The common syntax @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node syntax @appendixsubsec The common syntax @cindex Info files (syntax) @cindex Syntax of info files @cindex Common syntax of info files The four files @file{commitinfo}, @file{loginfo}, @file{rcsinfo} and @file{editinfo} all have a common format. The purpose of the files are described later on. The common syntax is described here. Each line contains the following: @itemize @bullet @item A regular expression @item A whitespace separator---one or more spaces and/or tabs. @item A file name or command-line template. @end itemize @noindent Blank lines are ignored. Lines that start with the character @samp{#} are treated as comments. Long lines unfortunately can @emph{not} be broken in two parts in any way. The first regular expression that matches the current directory name in the repository is used. The rest of the line is used as a file name or command-line as appropriate. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node commitinfo @appendixsec Commitinfo @cindex Commitinfo @cindex Checking commits @cindex Precommit checking The @file{commitinfo} file defines programs to execute whenever @samp{cvs commit} is about to execute. These programs are used for pre-commit checking to verify that the modified, added and removed files are really ready to be committed. This could be used, for instance, to verify that the changed files conform to to your site's standards for coding practice. As mentioned earlier, each line in the @file{commitinfo} file consists of a regular expression and a command-line template. The template can include a program name and any number of arguments you wish to supply to it. The full path to the current source repository is appended to the template, followed by the file names of any files involved in the commit (added, removed, and modified files). The first line with a regular expression matching the relative path to the module will be used. If the command returns a non-zero exit status the commit will be aborted. @cindex DEFAULT in commitinfo If the repository name does not match any of the regular expressions in this file, the @samp{DEFAULT} line is used, if it is specified. @cindex ALL in commitinfo All occurances of the name @samp{ALL} appearing as a regular expression are used in addition to the first matching regular expression or the name @samp{DEFAULT}. Note: when @sc{CVS} is accessing a remote repository, @file{commitinfo} will be run on the @emph{remote} (i.e., server) side, not the client side (@pxref{Remote repositories}). @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node editinfo @appendixsec Editinfo @cindex Editinfo @cindex Editor, specifying per module @cindex Per-module editor @cindex Log messages, editing If you want to make sure that all log messages look the same way, you can use the @file{editinfo} file to specify a program that is used to edit the log message. This program could be a custom-made editor that always enforces a certain style of the log message, or maybe a simple shell script that calls an editor, and checks that the entered message contains the required fields. If no matching line is found in the @file{editinfo} file, the editor specified in the environment variable @code{$CVSEDITOR} is used instead. If that variable is not set, then the environment variable @code{$EDITOR} is used instead. If that variable is not set a precompiled default, normally @code{vi}, will be used. The @file{editinfo} file is often most useful together with the @file{rcsinfo} file, which can be used to specify a log message template. Each line in the @file{editinfo} file consists of a regular expression and a command-line template. The template must include a program name, and can include any number of arguments. The full path to the current log message template file is appended to the template. One thing that should be noted is that the @samp{ALL} keyword is not supported. If more than one matching line is found, the first one is used. This can be useful for specifying a default edit script in a module, and then overriding it in a subdirectory. @cindex DEFAULT in editinfo If the repository name does not match any of the regular expressions in this file, the @samp{DEFAULT} line is used, if it is specified. If the edit script exits with a non-zero exit status, the commit is aborted. Note: when @sc{CVS} is accessing a remote repository, @file{editinfo} will be run on the @emph{remote} (i.e., server) side, not the client side (@pxref{Remote repositories}). @menu * editinfo example:: Editinfo example @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node editinfo example @appendixsubsec Editinfo example The following is a little silly example of a @file{editinfo} file, together with the corresponding @file{rcsinfo} file, the log message template and an editor script. We begin with the log message template. We want to always record a bug-id number on the first line of the log message. The rest of log message is free text. The following template is found in the file @file{/usr/cvssupport/tc.template}. @example BugId: @end example The script @file{/usr/cvssupport/bugid.edit} is used to edit the log message. @example #!/bin/sh # # bugid.edit filename # # Call $EDITOR on FILENAME, and verify that the # resulting file contains a valid bugid on the first # line. if [ "x$EDITOR" = "x" ]; then EDITOR=vi; fi if [ "x$CVSEDITOR" = "x" ]; then CVSEDITOR=$EDITOR; fi $CVSEDITOR $1 until head -1|grep '^BugId:[ ]*[0-9][0-9]*$' < $1 do echo -n "No BugId found. Edit again? ([y]/n)" read ans case $@{ans@} in n*) exit 1;; esac $CVSEDITOR $1 done @end example The @file{editinfo} file contains this line: @example ^tc /usr/cvssupport/bugid.edit @end example The @file{rcsinfo} file contains this line: @example ^tc /usr/cvssupport/tc.template @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node loginfo @appendixsec Loginfo @cindex Loginfo @cindex Storing log messages @cindex Mailing log messages @cindex Distributing log messages @cindex Log messages The @file{loginfo} file is used to control where @samp{cvs commit} log information is sent. The first entry on a line is a regular expression which is tested against the directory that the change is being made to, relative to the @code{$CVSROOT}. If a match is found, then the remainder of the line is a filter program that should expect log information on its standard input. The filter program may use one and only one % modifier (a la printf). If @samp{%s} is specified in the filter program, a brief title is included (enclosed in single quotes) showing the modified file names. If the repository name does not match any of the regular expressions in this file, the @samp{DEFAULT} line is used, if it is specified. All occurances of the name @samp{ALL} appearing as a regular expression are used in addition to the first matching regular expression or @samp{DEFAULT}. The first matching regular expression is used. @xref{commit files}, for a description of the syntax of the @file{loginfo} file. Note: when @sc{CVS} is accessing a remote repository, @file{loginfo} will be run on the @emph{remote} (i.e., server) side, not the client side (@pxref{Remote repositories}). @menu * loginfo example:: Loginfo example @end menu @c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . @node loginfo example @appendixsubsec Loginfo example The following @file{loginfo} file, together with the tiny shell-script below, appends all log messages to the file @file{$CVSROOT/CVSROOT/commitlog}, and any commits to the administrative files (inside the @file{CVSROOT} directory) are also logged in @file{/usr/adm/cvsroot-log} and mailed to @t{ceder}. @example ALL /usr/local/bin/cvs-log $CVSROOT/CVSROOT/commitlog ^CVSROOT Mail -s %s ceder ^CVSROOT /usr/local/bin/cvs-log /usr/adm/cvsroot-log @end example The shell-script @file{/usr/local/bin/cvs-log} looks like this: @example #!/bin/sh (echo "-----------------------------------------------------------------"; echo -n $USER" "; date; echo; sed '1s+'$@{CVSROOT@}'++') >> $1 @end example @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node rcsinfo @appendixsec Rcsinfo @cindex Rcsinfo @cindex Form for log message @cindex Log message template @cindex Template for log message The @file{rcsinfo} file can be used to specify a form to edit when filling out the commit log. The @file{rcsinfo} file has a syntax similar to the @file{editinfo}, @file{commitinfo} and @file{loginfo} files. @xref{syntax}. Unlike the other files the second part is @emph{not} a command-line template. Instead, the part after the regular expression should be a full pathname to a file containing the log message template. If the repository name does not match any of the regular expressions in this file, the @samp{DEFAULT} line is used, if it is specified. All occurances of the name @samp{ALL} appearing as a regular expression are used in addition to the first matching regular expression or @samp{DEFAULT}. The log message template will be used as a default log message. If you specify a log message with @samp{cvs commit -m @var{message}} or @samp{cvs commit -f @var{file}} that log message will override the template. @xref{editinfo example}, for an example @file{rcsinfo} file. Note: when @sc{CVS} is accessing a remote repository, @file{rcsinfo} will be run on the @emph{remote} (i.e., server) side, not the client side (@pxref{Remote repositories}). @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node cvsignore @appendixsec Ignoring files via cvsignore @cindex Cvsignore, global @cindex Global cvsignore @cindex Ignoring files @c -- This chapter should maybe be moved to the @c tutorial part of the manual? There are certain file names that frequently occur inside your working copy, but that you don't want to put under @sc{cvs} control. Examples are all the object files that you get while you compile your sources. Normally, when you run @samp{cvs update}, it prints a line for each file it encounters that it doesn't know about (@pxref{update output}). @sc{cvs} has a list of files (or sh(1) file name patterns) that it should ignore while running @code{update}, @code{import} and @code{release}. @c -- Are those the only three commands affected? This list is constructed in the following way. @itemize @bullet @item The list is initialized to the following file name patterns: @cindex Ignored files @cindex Automatically ignored files @example RCSLOG RCS SCCS CVS* cvslog.* tags TAGS .make.state .nse_depinfo *~ #* .#* ,* *.old *.bak *.BAK *.orig *.rej .del-* *.a *.o *.so *.Z *.elc *.ln core @end example @item The per-repository list in @file{$CVSROOT/CVSROOT/cvsignore} is appended to the list, if that file exists. @item The per-user list in @file{.cvsignore} in your home directory is appended to the list, if it exists. @item Any entries in the environment variable @code{$CVSIGNORE} is appended to the list. @item Any @samp{-I} options given to @sc{cvs} is appended. @item As @sc{cvs} traverses through your directories, the contents of any @file{.cvsignore} will be appended to the list. The patterns found in @file{.cvsignore} are only valid for the directory that contains them, not for any sub-directories. @end itemize In any of the 5 places listed above, a single exclamation mark (@samp{!}) clears the ignore list. This can be used if you want to store any file which normally is ignored by @sc{cvs}. @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node history file @appendixsec The history file @cindex History file @cindex Log information, saving The file @file{$CVSROOT/CVSROOT/history} is used to log information for the @code{history} command (@pxref{history}). This file must be created to turn on logging. This is done automatically if the @code{cvsinit} script is used to set up the repository. The file format of the @file{history} file is unfortunately not yet documented anywhere, but it is fairly easy to understand most of it. @c -- document it here? @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Setting up @appendixsec Setting up the repository @cindex Repository, setting up @cindex Creating a repository @cindex Setting up a repository When you install @sc{cvs} for the first time, you should follow the instructions in the @file{INSTALL} file to set up the repository. If you want to set up another repository, the easiest way to get a reasonable set of working administrative files is to run the @code{cvsinit} shell script. It will set up an empty repository in the directory defined by the environment variable @code{$CVSROOT}. (@code{cvsinit} is careful to never overwrite any existing files in the repository, so no harm is done if you run @code{cvsinit} on an already set-up repository. In fact, running it on an already set-up repository is the best way to update the various scripts from the @samp{contrib} directory.) @c --------------------------------------------------------------------- @node Environment variables @appendix All environment variables which affect CVS @cindex Environment variables @cindex Reference manual for variables This is a complete list of all environment variables that affect @sc{cvs}. @table @code @cindex CVSIGNORE @item $CVSIGNORE A whitespace-separated list of file name patterns that @sc{cvs} should ignore. @xref{cvsignore}. @item $CVSWRAPPERS A whitespace-separated list of file name patterns that @sc{cvs} should treat as wrappers. @xref{Wrappers}. @cindex CVSREAD @item $CVSREAD If this is set, @code{checkout} and @code{update} will try hard to make the files in your working directory read-only. When this is not set, the default behavior is to permit modification of your working files. @cindex CVSROOT @item $CVSROOT Should contain the full pathname to the root of the @sc{cvs} source repository (where the @sc{rcs} history files are kept). This information must be available to @sc{cvs} for most commands to execute; if @code{$CVSROOT} is not set, or if you wish to override it for one invocation, you can supply it on the command line: @samp{cvs -d cvsroot cvs_command@dots{}} You may not need to set @code{$CVSROOT} if your @sc{cvs} binary has the right path compiled in. @ignore @c FIXME--update the rest of this manual to reflect CVS/Root. If your site has several repositories, you must be careful to set @code{$CVSROOT} to the appropriate one when you use @sc{cvs}, even if you just run @samp{cvs update} inside an already checked-out module. Future releases of @sc{cvs} will probably store information about which repository the module came from inside the @file{CVS} directory, but version 1.3 relies totally on @code{$CVSROOT}. @end ignore @cindex EDITOR @cindex CVSEDITOR @item $EDITOR @itemx $CVSEDITOR Specifies the program to use for recording log messages during commit. If not set, the default is @samp{/usr/ucb/vi}. @code{$CVSEDITOR} overrides @code{$EDITOR}. @code{$CVSEDITOR} does not exist in @sc{cvs} 1.3, but the next release will probably include it. @cindex PATH @item $PATH If @code{$RCSBIN} is not set, and no path is compiled into @sc{cvs}, it will use @code{$PATH} to try to find all programs it uses. @cindex RCSBIN @item $RCSBIN Specifies the full pathname of the location of @sc{rcs} programs, such as co(1) and ci(1). If not set, a compiled-in value is used, or your @code{$PATH} is searched. @end table @sc{cvs} is a front-end to @sc{rcs}. The following environment variables affect @sc{rcs}: @table @code @cindex LOGNAME @item $LOGNAME @cindex USER @itemx $USER If set, they affect who @sc{rcs} thinks you are. If you have trouble checking in files it might be because your login name differs from the setting of e.g. @code{$LOGNAME}. @cindex RCSINIT @item $RCSINIT Options prepended to the argument list, separated by spaces. A backslash escapes spaces within an option. The @code{$RCSINIT} options are prepended to the argument lists of most @sc{rcs} commands. @cindex TMPDIR @item $TMPDIR @cindex TMP @itemx $TMP @cindex TEMP @itemx $TEMP Name of the temporary directory. The environment variables are inspected in the order they appear above and the first value found is taken; if none of them are set, a host-dependent default is used, typically @file{/tmp}. @end table @c --------------------------------------------------------------------- @node Troubleshooting @appendix Troubleshooting @menu * Magic branch numbers:: Magic branch numbers @end menu @ignore @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @c @node Bad administrative files @appendixsec Bad administrative files @c -- Give hints on how to fix them @end ignore @c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @node Magic branch numbers @appendixsec Magic branch numbers Externally, branch numbers consist of an odd number of dot-separated decimal integers. @xref{Revision numbers}. That is not the whole truth, however. For efficiency reasons @sc{cvs} sometimes inserts an extra 0 in the second rightmost position (1.2.3 becomes 1.2.0.3, 8.9.10.11.12 becomes 8.9.10.11.0.12 and so on). @sc{cvs} does a pretty good job at hiding these so called magic branches, but in at least four places the hiding is incomplete. @itemize @bullet @item The magic branch can appear in the output from @code{cvs status} in vanilla @sc{cvs} 1.3. This is fixed in @sc{cvs} 1.3-s2. @item The magic branch number appears in the output from @code{cvs log}. This is much harder to fix, since @code{cvs log} runs @code{rlog} (which is part of the @sc{rcs} distribution), and modifying @code{rlog} to know about magic branches would probably break someone's habits (if they use branch 0 for their own purposes). @item You cannot specify a symbolic branch name to @code{cvs log}. @item You cannot specify a symbolic branch name to @code{cvs admin}. @end itemize You can use the @code{admin} command to reassign a symbolic name to a branch the way @sc{rcs} expects it to be. If @code{R4patches} is assigned to the branch 1.4.2 (magic branch number 1.4.0.2) in file @file{numbers.c} you can do this: @example $ cvs admin -NR4patches:1.4.2 numbers.c @end example It only works if at least one revision is already committed on the branch. Be very careful so that you do not assign the tag to the wrong number. (There is no way to see how the tag was assigned yesterday). @c --------------------------------------------------------------------- @node Copying @appendix GNU GENERAL PUBLIC LICENSE @c @include gpl.texinfo @c --------------------------------------------------------------------- @node Index @unnumbered Index @cindex Index If you cannot find what you are looking for here write to <@t{ceder@@signum.se}> so that an entry can be added to the next release of this manual. @printindex cp @summarycontents @contents @bye Local Variables: fill-column: 55 End: