1999-05-06 Jim Kingdon * Makefile.in (DISTFILES): Remove zlib.mak. * zlib.mak: Removed; we are back to a single makefile for Visual C++ version 4. 1999-04-26 Jim Kingdon * Makefile.in (DISTFILES): Add zlib.dsp zlib.mak. 1999-04-26 (submitted 1999-03-24) John O'Connor * zlib.dsp: new file. MSVC project file used to build the library. * zlib.mak: new file. Makefile for building from the command-line. * .cvsignore: Added entries to ignore directories generated by the NT build, Debug and Release. 1999-02-24 Jim Kingdon * Makefile.in (DISTFILES): Add .cvsignore. Tue Mar 18 13:05:37 1997 Jim Meyering * Makefile.in (DISTFILES): Change glob pattern so that it doesn't match `Makefile'. Add Make_vms.com explicitly. 1997-01-01 Fred Fish * Makefile.in (CC): Use @CC@ rather than hard coded "cc". (CFLAGS): Use @CFLAGS@ rather than hard coded "-O". (LDFLAGS): Use @LDFLAGS@ rather than hard coded "-L. -lz". (prefix): Use @prefix@ rather than hard coded "/usr/local". (example, minigzip): Use $(LIBS) when linking. Wed Sep 11 00:59:44 1996 Jim Kingdon * build_zlib.com: Add infblock.c and infcodes.c. * build_zlib.com: New file. * Makefile.in (DISTFILES): Add build_zlib.com. Fri Aug 16 16:07:38 1996 Norbert Kiesel * Makefile.in (installdirs): new (empty) target ChangeLog file for zlib Changes in 1.0.4 (24 Jul 96) - In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF bit, so the decompressor could decompress all the correct data but went on to attempt decompressing extra garbage data. This affected minigzip too. - zlibVersion and gzerror return const char* (needed for DLL) - port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno) - use z_error only for DEBUG (avoid problem with DLLs) Changes in 1.0.3 (2 Jul 96) - use z_streamp instead of z_stream *, which is now a far pointer in MSDOS small and medium models; this makes the library incompatible with previous versions for these models. (No effect in large model or on other systems.) - return OK instead of BUF_ERROR if previous deflate call returned with avail_out as zero but there is nothing to do - added memcmp for non STDC compilers - define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly) - define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO) - better check for 16-bit mode MSC (avoids problem with Symantec) Changes in 1.0.2 (23 May 96) - added Windows DLL support - added a function zlibVersion (for the DLL support) - fixed declarations using Bytef in infutil.c (pb with MSDOS medium model) - Bytef is define's instead of typedef'd only for Borland C - avoid reading uninitialized memory in example.c - mention in README that the zlib format is now RFC1950 - updated Makefile.dj2 - added algorithm.doc Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion] - fix array overlay in deflate.c which sometimes caused bad compressed data - fix inflate bug with empty stored block - fix MSDOS medium model which was broken in 0.99 - fix deflateParams() which could generated bad compressed data. - Bytef is define'd instead of typedef'ed (work around Borland bug) - added an INDEX file - new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32), Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas) - speed up adler32 for modern machines without auto-increment - added -ansi for IRIX in configure - static_init_done in trees.c is an int - define unlink as delete for VMS - fix configure for QNX - add configure branch for SCO and HPUX - avoid many warnings (unused variables, dead assignments, etc...) - no fdopen for BeOS - fix the Watcom fix for 32 bit mode (define FAR as empty) - removed redefinition of Byte for MKWERKS - work around an MWKERKS bug (incorrect merge of all .h files) Changes in 0.99 (27 Jan 96) - allow preset dictionary shared between compressor and decompressor - allow compression level 0 (no compression) - add deflateParams in zlib.h: allow dynamic change of compression level and compression strategy. - test large buffers and deflateParams in example.c - add optional "configure" to build zlib as a shared library - suppress Makefile.qnx, use configure instead - fixed deflate for 64-bit systems (detected on Cray) - fixed inflate_blocks for 64-bit systems (detected on Alpha) - declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2) - always return Z_BUF_ERROR when deflate() has nothing to do - deflateInit and inflateInit are now macros to allow version checking - prefix all global functions and types with z_ with -DZ_PREFIX - make falloc completely reentrant (inftrees.c) - fixed very unlikely race condition in ct_static_init - free in reverse order of allocation to help memory manager - use zlib-1.0/* instead of zlib/* inside the tar.gz - make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion -Wstrict-prototypes -Wmissing-prototypes" - allow gzread on concatenated .gz files - deflateEnd now returns Z_DATA_ERROR if it was premature - deflate is finally (?) fully deterministic (no matches beyond end of input) - Document Z_SYNC_FLUSH - add uninstall in Makefile - Check for __cpluplus in zlib.h - Better test in ct_align for partial flush - avoid harmless warnings for Borland C++ - initialize hash_head in deflate.c - avoid warning on fdopen (gzio.c) for HP cc -Aa - include stdlib.h for STDC compilers - include errno.h for Cray - ignore error if ranlib doesn't exist - call ranlib twice for NeXTSTEP - use exec_prefix instead of prefix for libz.a - renamed ct_* as _tr_* to avoid conflict with applications - clear z->msg in inflateInit2 before any error return - initialize opaque in example.c, gzio.c, deflate.c and inflate.c - fixed typo in zconf.h (_GNUC__ => __GNUC__) - check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode) - fix typo in Make_vms.com (f$trnlnm -> f$getsyi) - in fcalloc, normalize pointer if size > 65520 bytes - don't use special fcalloc for 32 bit Borland C++ - use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc... - use Z_BINARY instead of BINARY - document that gzclose after gzdopen will close the file - allow "a" as mode in gzopen. - fix error checking in gzread - allow skipping .gz extra-field on pipes - added reference to Perl interface in README - put the crc table in FAR data (I dislike more and more the medium model :) - added get_crc_table - added a dimension to all arrays (Borland C can't count). - workaround Borland C bug in declaration of inflate_codes_new & inflate_fast - guard against multiple inclusion of *.h (for precompiled header on Mac) - Watcom C pretends to be Microsoft C small model even in 32 bit mode. - don't use unsized arrays to avoid silly warnings by Visual C++: warning C4746: 'inflate_mask' : unsized array treated as '__far' (what's wrong with far data in far model?). - define enum out of inflate_blocks_state to allow compilation with C++ Changes in 0.95 (16 Aug 95) - fix MSDOS small and medium model (now easier to adapt to any compiler) - inlined send_bits - fix the final (:-) bug for deflate with flush (output was correct but not completely flushed in rare occasions). - default window size is same for compression and decompression (it's now sufficient to set MAX_WBITS in zconf.h). - voidp -> voidpf and voidnp -> voidp (for consistency with other typedefs and because voidnp was not near in large model). Changes in 0.94 (13 Aug 95) - support MSDOS medium model - fix deflate with flush (could sometimes generate bad output) - fix deflateReset (zlib header was incorrectly suppressed) - added support for VMS - allow a compression level in gzopen() - gzflush now calls fflush - For deflate with flush, flush even if no more input is provided. - rename libgz.a as libz.a - avoid complex expression in infcodes.c triggering Turbo C bug - work around a problem with gcc on Alpha (in INSERT_STRING) - don't use inline functions (problem with some gcc versions) - allow renaming of Byte, uInt, etc... with #define. - avoid warning about (unused) pointer before start of array in deflate.c - avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c - avoid reserved word 'new' in trees.c Changes in 0.93 (25 June 95) - temporarily disable inline functions - make deflate deterministic - give enough lookahead for PARTIAL_FLUSH - Set binary mode for stdin/stdout in minigzip.c for OS/2 - don't even use signed char in inflate (not portable enough) - fix inflate memory leak for segmented architectures Changes in 0.92 (3 May 95) - don't assume that char is signed (problem on SGI) - Clear bit buffer when starting a stored block - no memcpy on Pyramid - suppressed inftest.c - optimized fill_window, put longest_match inline for gcc - optimized inflate on stored blocks. - untabify all sources to simplify patches Changes in 0.91 (2 May 95) - Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h - Document the memory requirements in zconf.h - added "make install" - fix sync search logic in inflateSync - deflate(Z_FULL_FLUSH) now works even if output buffer too short - after inflateSync, don't scare people with just "lo world" - added support for DJGPP Changes in 0.9 (1 May 95) - don't assume that zalloc clears the allocated memory (the TurboC bug was Mark's bug after all :) - let again gzread copy uncompressed data unchanged (was working in 0.71) - deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented - added a test of inflateSync in example.c - moved MAX_WBITS to zconf.h because users might want to change that. - document explicitly that zalloc(64K) on MSDOS must return a normalized pointer (zero offset) - added Makefiles for Microsoft C, Turbo C, Borland C++ - faster crc32() Changes in 0.8 (29 April 95) - added fast inflate (inffast.c) - deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this is incompatible with previous versions of zlib which returned Z_OK. - work around a TurboC compiler bug (bad code for b << 0, see infutil.h) (actually that was not a compiler bug, see 0.81 above) - gzread no longer reads one extra byte in certain cases - In gzio destroy(), don't reference a freed structure - avoid many warnings for MSDOS - avoid the ERROR symbol which is used by MS Windows Changes in 0.71 (14 April 95) - Fixed more MSDOS compilation problems :( There is still a bug with TurboC large model. Changes in 0.7 (14 April 95) - Added full inflate support. - Simplified the crc32() interface. The pre- and post-conditioning (one's complement) is now done inside crc32(). WARNING: this is incompatible with previous versions; see zlib.h for the new usage. Changes in 0.61 (12 April 95) - workaround for a bug in TurboC. example and minigzip now work on MSDOS. Changes in 0.6 (11 April 95) - added minigzip.c - added gzdopen to reopen a file descriptor as gzFile - added transparent reading of non-gziped files in gzread. - fixed bug in gzread (don't read crc as data) - fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose). - don't allocate big arrays in the stack (for MSDOS) - fix some MSDOS compilation problems Changes in 0.5: - do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but not yet Z_FULL_FLUSH. - support decompression but only in a single step (forced Z_FINISH) - added opaque object for zalloc and zfree. - added deflateReset and inflateReset - added a variable zlib_version for consistency checking. - renamed the 'filter' parameter of deflateInit2 as 'strategy'. Added Z_FILTERED and Z_HUFFMAN_ONLY constants. Changes in 0.4: - avoid "zip" everywhere, use zlib instead of ziplib. - suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush if compression method == 8. - added adler32 and crc32 - renamed deflateOptions as deflateInit2, call one or the other but not both - added the method parameter for deflateInit2. - added inflateInit2 - simplied considerably deflateInit and inflateInit by not supporting user-provided history buffer. This is supported only in deflateInit2 and inflateInit2. Changes in 0.3: - prefix all macro names with Z_ - use Z_FINISH instead of deflateEnd to finish compression. - added Z_HUFFMAN_ONLY - added gzerror()