/* Basic 80960 instruction formats. * * The 'COJ' instructions are actually COBR instructions with the 'b' in * the mnemonic replaced by a 'j'; they are ALWAYS "de-optimized" if necessary: * if the displacement will not fit in 13 bits, the assembler will replace them * with the corresponding compare and branch instructions. * * All of the 'MEMn' instructions are the same format; the 'n' in the name * indicates the default index scale factor (the size of the datum operated on). * * The FBRA formats are not actually an instruction format. They are the * "convenience directives" for branching on floating-point comparisons, * each of which generates 2 instructions (a 'bno' and one other branch). * * The CALLJ format is not actually an instruction format. It indicates that * the instruction generated (a CTRL-format 'call') should have its relocation * specially flagged for link-time replacement with a 'bal' or 'calls' if * appropriate. */ /* $Id: i960.h,v 1.1 1995/10/18 08:39:09 deraadt Exp $ */ #define CTRL 0 #define COBR 1 #define COJ 2 #define REG 3 #define MEM1 4 #define MEM2 5 #define MEM4 6 #define MEM8 7 #define MEM12 8 #define MEM16 9 #define FBRA 10 #define CALLJ 11 /* Masks for the mode bits in REG format instructions */ #define M1 0x0800 #define M2 0x1000 #define M3 0x2000 /* Generate the 12-bit opcode for a REG format instruction by placing the * high 8 bits in instruction bits 24-31, the low 4 bits in instruction bits * 7-10. */ #define REG_OPC(opc) ((opc & 0xff0) << 20) | ((opc & 0xf) << 7) /* Generate a template for a REG format instruction: place the opcode bits * in the appropriate fields and OR in mode bits for the operands that will not * be used. I.e., * set m1=1, if src1 will not be used * set m2=1, if src2 will not be used * set m3=1, if dst will not be used * * Setting the "unused" mode bits to 1 speeds up instruction execution(!). * The information is also useful to us because some 1-operand REG instructions * use the src1 field, others the dst field; and some 2-operand REG instructions * use src1/src2, others src1/dst. The set mode bits enable us to distinguish. */ #define R_0(opc) ( REG_OPC(opc) | M1 | M2 | M3 ) /* No operands */ #define R_1(opc) ( REG_OPC(opc) | M2 | M3 ) /* 1 operand: src1 */ #define R_1D(opc) ( REG_OPC(opc) | M1 | M2 ) /* 1 operand: dst */ #define R_2(opc) ( REG_OPC(opc) | M3 ) /* 2 ops: src1/src2 */ #define R_2D(opc) ( REG_OPC(opc) | M2 ) /* 2 ops: src1/dst */ #define R_3(opc) ( REG_OPC(opc) ) /* 3 operands */ /* DESCRIPTOR BYTES FOR REGISTER OPERANDS * * Interpret names as follows: * R: global or local register only * RS: global, local, or (if target allows) special-function register only * RL: global or local register, or integer literal * RSL: global, local, or (if target allows) special-function register; * or integer literal * F: global, local, or floating-point register * FL: global, local, or floating-point register; or literal (including * floating point) * * A number appended to a name indicates that registers must be aligned, * as follows: * 2: register number must be multiple of 2 * 4: register number must be multiple of 4 */ #define SFR 0x10 /* Mask for the "sfr-OK" bit */ #define LIT 0x08 /* Mask for the "literal-OK" bit */ #define FP 0x04 /* Mask for "floating-point-OK" bit */ /* This macro ors the bits together. Note that 'align' is a mask * for the low 0, 1, or 2 bits of the register number, as appropriate. */ #define OP(align,lit,fp,sfr) ( align | lit | fp | sfr ) #define R OP( 0, 0, 0, 0 ) #define RS OP( 0, 0, 0, SFR ) #define RL OP( 0, LIT, 0, 0 ) #define RSL OP( 0, LIT, 0, SFR ) #define F OP( 0, 0, FP, 0 ) #define FL OP( 0, LIT, FP, 0 ) #define R2 OP( 1, 0, 0, 0 ) #define RL2 OP( 1, LIT, 0, 0 ) #define F2 OP( 1, 0, FP, 0 ) #define FL2 OP( 1, LIT, FP, 0 ) #define R4 OP( 3, 0, 0, 0 ) #define RL4 OP( 3, LIT, 0, 0 ) #define F4 OP( 3, 0, FP, 0 ) #define FL4 OP( 3, LIT, FP, 0 ) #define M 0x7f /* Memory operand (MEMA & MEMB format instructions) */ /* Macros to extract info from the register operand descriptor byte 'od'. */ #define SFR_OK(od) (od & SFR) /* TRUE if sfr operand allowed */ #define LIT_OK(od) (od & LIT) /* TRUE if literal operand allowed */ #define FP_OK(od) (od & FP) /* TRUE if floating-point op allowed */ #define REG_ALIGN(od,n) ((od & 0x3 & n) == 0) /* TRUE if reg #n is properly aligned */ #define MEMOP(od) (od == M) /* TRUE if operand is a memory operand*/ /* Description of a single i80960 instruction */ struct i960_opcode { long opcode; /* 32 bits, constant fields filled in, rest zeroed */ char *name; /* Assembler mnemonic */ short iclass; /* Class: see #defines below */ char format; /* REG, COBR, CTRL, MEMn, COJ, FBRA, or CALLJ */ char num_ops; /* Number of operands */ char operand[3];/* Operand descriptors; same order as assembler instr */ }; /* Classes of 960 intructions: * - each instruction falls into one class. * - each target architecture supports one or more classes. * * EACH CONSTANT MUST CONTAIN 1 AND ONLY 1 SET BIT!: see targ_has_iclass(). */ #define I_BASE 0x01 /* 80960 base instruction set */ #define I_CX 0x02 /* 80960Cx instruction */ #define I_DEC 0x04 /* Decimal instruction */ #define I_FP 0x08 /* Floating point instruction */ #define I_KX 0x10 /* 80960Kx instruction */ #define I_MIL 0x20 /* Military instruction */ #define I_CASIM 0x40 /* CA simulator instruction */ /****************************************************************************** * * TABLE OF i960 INSTRUCTION DESCRIPTIONS * ******************************************************************************/ const struct i960_opcode i960_opcodes[] = { /* if a CTRL instruction has an operand, it's always a displacement */ { 0x09000000, "callj", I_BASE, CALLJ, 1 },/*default=='call'*/ { 0x08000000, "b", I_BASE, CTRL, 1 }, { 0x09000000, "call", I_BASE, CTRL, 1 }, { 0x0a000000, "ret", I_BASE, CTRL, 0 }, { 0x0b000000, "bal", I_BASE, CTRL, 1 }, { 0x10000000, "bno", I_BASE, CTRL, 1 }, { 0x10000000, "bf", I_BASE, CTRL, 1 }, /* same as bno */ { 0x10000000, "bru", I_BASE, CTRL, 1 }, /* same as bno */ { 0x11000000, "bg", I_BASE, CTRL, 1 }, { 0x11000000, "brg", I_BASE, CTRL, 1 }, /* same as bg */ { 0x12000000, "be", I_BASE, CTRL, 1 }, { 0x12000000, "bre", I_BASE, CTRL, 1 }, /* same as be */ { 0x13000000, "bge", I_BASE, CTRL, 1 }, { 0x13000000, "brge", I_BASE, CTRL, 1 }, /* same as bge */ { 0x14000000, "bl", I_BASE, CTRL, 1 }, { 0x14000000, "brl", I_BASE, CTRL, 1 }, /* same as bl */ { 0x15000000, "bne", I_BASE, CTRL, 1 }, { 0x15000000, "brlg", I_BASE, CTRL, 1 }, /* same as bne */ { 0x16000000, "ble", I_BASE, CTRL, 1 }, { 0x16000000, "brle", I_BASE, CTRL, 1 }, /* same as ble */ { 0x17000000, "bo", I_BASE, CTRL, 1 }, { 0x17000000, "bt", I_BASE, CTRL, 1 }, /* same as bo */ { 0x17000000, "bro", I_BASE, CTRL, 1 }, /* same as bo */ { 0x18000000, "faultno", I_BASE, CTRL, 0 }, { 0x18000000, "faultf", I_BASE, CTRL, 0 }, /*same as faultno*/ { 0x19000000, "faultg", I_BASE, CTRL, 0 }, { 0x1a000000, "faulte", I_BASE, CTRL, 0 }, { 0x1b000000, "faultge", I_BASE, CTRL, 0 }, { 0x1c000000, "faultl", I_BASE, CTRL, 0 }, { 0x1d000000, "faultne", I_BASE, CTRL, 0 }, { 0x1e000000, "faultle", I_BASE, CTRL, 0 }, { 0x1f000000, "faulto", I_BASE, CTRL, 0 }, { 0x1f000000, "faultt", I_BASE, CTRL, 0 }, /* syn for faulto */ { 0x01000000, "syscall", I_CASIM,CTRL, 0 }, /* If a COBR (or COJ) has 3 operands, the last one is always a * displacement and does not appear explicitly in the table. */ { 0x20000000, "testno", I_BASE, COBR, 1, R }, { 0x21000000, "testg", I_BASE, COBR, 1, R }, { 0x22000000, "teste", I_BASE, COBR, 1, R }, { 0x23000000, "testge", I_BASE, COBR, 1, R }, { 0x24000000, "testl", I_BASE, COBR, 1, R }, { 0x25000000, "testne", I_BASE, COBR, 1, R }, { 0x26000000, "testle", I_BASE, COBR, 1, R }, { 0x27000000, "testo", I_BASE, COBR, 1, R }, { 0x30000000, "bbc", I_BASE, COBR, 3, RL, RS }, { 0x31000000, "cmpobg", I_BASE, COBR, 3, RL, RS }, { 0x32000000, "cmpobe", I_BASE, COBR, 3, RL, RS }, { 0x33000000, "cmpobge", I_BASE, COBR, 3, RL, RS }, { 0x34000000, "cmpobl", I_BASE, COBR, 3, RL, RS }, { 0x35000000, "cmpobne", I_BASE, COBR, 3, RL, RS }, { 0x36000000, "cmpoble", I_BASE, COBR, 3, RL, RS }, { 0x37000000, "bbs", I_BASE, COBR, 3, RL, RS }, { 0x38000000, "cmpibno", I_BASE, COBR, 3, RL, RS }, { 0x39000000, "cmpibg", I_BASE, COBR, 3, RL, RS }, { 0x3a000000, "cmpibe", I_BASE, COBR, 3, RL, RS }, { 0x3b000000, "cmpibge", I_BASE, COBR, 3, RL, RS }, { 0x3c000000, "cmpibl", I_BASE, COBR, 3, RL, RS }, { 0x3d000000, "cmpibne", I_BASE, COBR, 3, RL, RS }, { 0x3e000000, "cmpible", I_BASE, COBR, 3, RL, RS }, { 0x3f000000, "cmpibo", I_BASE, COBR, 3, RL, RS }, { 0x31000000, "cmpojg", I_BASE, COJ, 3, RL, RS }, { 0x32000000, "cmpoje", I_BASE, COJ, 3, RL, RS }, { 0x33000000, "cmpojge", I_BASE, COJ, 3, RL, RS }, { 0x34000000, "cmpojl", I_BASE, COJ, 3, RL, RS }, { 0x35000000, "cmpojne", I_BASE, COJ, 3, RL, RS }, { 0x36000000, "cmpojle", I_BASE, COJ, 3, RL, RS }, { 0x38000000, "cmpijno", I_BASE, COJ, 3, RL, RS }, { 0x39000000, "cmpijg", I_BASE, COJ, 3, RL, RS }, { 0x3a000000, "cmpije", I_BASE, COJ, 3, RL, RS }, { 0x3b000000, "cmpijge", I_BASE, COJ, 3, RL, RS }, { 0x3c000000, "cmpijl", I_BASE, COJ, 3, RL, RS }, { 0x3d000000, "cmpijne", I_BASE, COJ, 3, RL, RS }, { 0x3e000000, "cmpijle", I_BASE, COJ, 3, RL, RS }, { 0x3f000000, "cmpijo", I_BASE, COJ, 3, RL, RS }, { 0x80000000, "ldob", I_BASE, MEM1, 2, M, R }, { 0x82000000, "stob", I_BASE, MEM1, 2, R , M }, { 0x84000000, "bx", I_BASE, MEM1, 1, M }, { 0x85000000, "balx", I_BASE, MEM1, 2, M, R }, { 0x86000000, "callx", I_BASE, MEM1, 1, M }, { 0x88000000, "ldos", I_BASE, MEM2, 2, M, R }, { 0x8a000000, "stos", I_BASE, MEM2, 2, R , M }, { 0x8c000000, "lda", I_BASE, MEM1, 2, M, R }, { 0x90000000, "ld", I_BASE, MEM4, 2, M, R }, { 0x92000000, "st", I_BASE, MEM4, 2, R , M }, { 0x98000000, "ldl", I_BASE, MEM8, 2, M, R2 }, { 0x9a000000, "stl", I_BASE, MEM8, 2, R2 ,M }, { 0xa0000000, "ldt", I_BASE, MEM12, 2, M, R4 }, { 0xa2000000, "stt", I_BASE, MEM12, 2, R4 ,M }, { 0xb0000000, "ldq", I_BASE, MEM16, 2, M, R4 }, { 0xb2000000, "stq", I_BASE, MEM16, 2, R4 ,M }, { 0xc0000000, "ldib", I_BASE, MEM1, 2, M, R }, { 0xc2000000, "stib", I_BASE, MEM1, 2, R , M }, { 0xc8000000, "ldis", I_BASE, MEM2, 2, M, R }, { 0xca000000, "stis", I_BASE, MEM2, 2, R , M }, { R_3(0x580), "notbit", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x581), "and", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x582), "andnot", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x583), "setbit", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x584), "notand", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x586), "xor", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x587), "or", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x588), "nor", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x589), "xnor", I_BASE, REG, 3, RSL,RSL,RS }, { R_2D(0x58a), "not", I_BASE, REG, 2, RSL,RS }, { R_3(0x58b), "ornot", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x58c), "clrbit", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x58d), "notor", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x58e), "nand", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x58f), "alterbit", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x590), "addo", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x591), "addi", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x592), "subo", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x593), "subi", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x598), "shro", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x59a), "shrdi", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x59b), "shri", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x59c), "shlo", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x59d), "rotate", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x59e), "shli", I_BASE, REG, 3, RSL,RSL,RS }, { R_2(0x5a0), "cmpo", I_BASE, REG, 2, RSL,RSL }, { R_2(0x5a1), "cmpi", I_BASE, REG, 2, RSL,RSL }, { R_2(0x5a2), "concmpo", I_BASE, REG, 2, RSL,RSL }, { R_2(0x5a3), "concmpi", I_BASE, REG, 2, RSL,RSL }, { R_3(0x5a4), "cmpinco", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x5a5), "cmpinci", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x5a6), "cmpdeco", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x5a7), "cmpdeci", I_BASE, REG, 3, RSL,RSL,RS }, { R_2(0x5ac), "scanbyte", I_BASE, REG, 2, RSL,RSL }, { R_2(0x5ae), "chkbit", I_BASE, REG, 2, RSL,RSL }, { R_3(0x5b0), "addc", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x5b2), "subc", I_BASE, REG, 3, RSL,RSL,RS }, { R_2D(0x5cc), "mov", I_BASE, REG, 2, RSL,RS }, { R_2D(0x5dc), "movl", I_BASE, REG, 2, RL2,R2 }, { R_2D(0x5ec), "movt", I_BASE, REG, 2, RL4,R4 }, { R_2D(0x5fc), "movq", I_BASE, REG, 2, RL4,R4 }, { R_3(0x610), "atmod", I_BASE, REG, 3, RS, RSL,R }, { R_3(0x612), "atadd", I_BASE, REG, 3, RS, RSL,RS }, { R_2D(0x640), "spanbit", I_BASE, REG, 2, RSL,RS }, { R_2D(0x641), "scanbit", I_BASE, REG, 2, RSL,RS }, { R_3(0x645), "modac", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x650), "modify", I_BASE, REG, 3, RSL,RSL,R }, { R_3(0x651), "extract", I_BASE, REG, 3, RSL,RSL,R }, { R_3(0x654), "modtc", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x655), "modpc", I_BASE, REG, 3, RSL,RSL,R }, { R_1(0x660), "calls", I_BASE, REG, 1, RSL }, { R_0(0x66b), "mark", I_BASE, REG, 0, }, { R_0(0x66c), "fmark", I_BASE, REG, 0, }, { R_0(0x66d), "flushreg", I_BASE, REG, 0, }, { R_0(0x66f), "syncf", I_BASE, REG, 0, }, { R_3(0x670), "emul", I_BASE, REG, 3, RSL,RSL,R2 }, { R_3(0x671), "ediv", I_BASE, REG, 3, RSL,RL2,RS }, { R_2D(0x672), "cvtadr", I_CASIM,REG, 2, RL, R2 }, { R_3(0x701), "mulo", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x708), "remo", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x70b), "divo", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x741), "muli", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x748), "remi", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x749), "modi", I_BASE, REG, 3, RSL,RSL,RS }, { R_3(0x74b), "divi", I_BASE, REG, 3, RSL,RSL,RS }, /* Floating-point instructions */ { R_2D(0x674), "cvtir", I_FP, REG, 2, RL, F }, { R_2D(0x675), "cvtilr", I_FP, REG, 2, RL, F }, { R_3(0x676), "scalerl", I_FP, REG, 3, RL, FL2,F2 }, { R_3(0x677), "scaler", I_FP, REG, 3, RL, FL, F }, { R_3(0x680), "atanr", I_FP, REG, 3, FL, FL, F }, { R_3(0x681), "logepr", I_FP, REG, 3, FL, FL, F }, { R_3(0x682), "logr", I_FP, REG, 3, FL, FL, F }, { R_3(0x683), "remr", I_FP, REG, 3, FL, FL, F }, { R_2(0x684), "cmpor", I_FP, REG, 2, FL, FL }, { R_2(0x685), "cmpr", I_FP, REG, 2, FL, FL }, { R_2D(0x688), "sqrtr", I_FP, REG, 2, FL, F }, { R_2D(0x689), "expr", I_FP, REG, 2, FL, F }, { R_2D(0x68a), "logbnr", I_FP, REG, 2, FL, F }, { R_2D(0x68b), "roundr", I_FP, REG, 2, FL, F }, { R_2D(0x68c), "sinr", I_FP, REG, 2, FL, F }, { R_2D(0x68d), "cosr", I_FP, REG, 2, FL, F }, { R_2D(0x68e), "tanr", I_FP, REG, 2, FL, F }, { R_1(0x68f), "classr", I_FP, REG, 1, FL }, { R_3(0x690), "atanrl", I_FP, REG, 3, FL2,FL2,F2 }, { R_3(0x691), "logeprl", I_FP, REG, 3, FL2,FL2,F2 }, { R_3(0x692), "logrl", I_FP, REG, 3, FL2,FL2,F2 }, { R_3(0x693), "remrl", I_FP, REG, 3, FL2,FL2,F2 }, { R_2(0x694), "cmporl", I_FP, REG, 2, FL2,FL2 }, { R_2(0x695), "cmprl", I_FP, REG, 2, FL2,FL2 }, { R_2D(0x698), "sqrtrl", I_FP, REG, 2, FL2,F2 }, { R_2D(0x699), "exprl", I_FP, REG, 2, FL2,F2 }, { R_2D(0x69a), "logbnrl", I_FP, REG, 2, FL2,F2 }, { R_2D(0x69b), "roundrl", I_FP, REG, 2, FL2,F2 }, { R_2D(0x69c), "sinrl", I_FP, REG, 2, FL2,F2 }, { R_2D(0x69d), "cosrl", I_FP, REG, 2, FL2,F2 }, { R_2D(0x69e), "tanrl", I_FP, REG, 2, FL2,F2 }, { R_1(0x69f), "classrl", I_FP, REG, 1, FL2 }, { R_2D(0x6c0), "cvtri", I_FP, REG, 2, FL, R }, { R_2D(0x6c1), "cvtril", I_FP, REG, 2, FL, R2 }, { R_2D(0x6c2), "cvtzri", I_FP, REG, 2, FL, R }, { R_2D(0x6c3), "cvtzril", I_FP, REG, 2, FL, R2 }, { R_2D(0x6c9), "movr", I_FP, REG, 2, FL, F }, { R_2D(0x6d9), "movrl", I_FP, REG, 2, FL2,F2 }, { R_2D(0x6e1), "movre", I_FP, REG, 2, FL4,F4 }, { R_3(0x6e2), "cpysre", I_FP, REG, 3, FL4,FL4,F4 }, { R_3(0x6e3), "cpyrsre", I_FP, REG, 3, FL4,FL4,F4 }, { R_3(0x78b), "divr", I_FP, REG, 3, FL, FL, F }, { R_3(0x78c), "mulr", I_FP, REG, 3, FL, FL, F }, { R_3(0x78d), "subr", I_FP, REG, 3, FL, FL, F }, { R_3(0x78f), "addr", I_FP, REG, 3, FL, FL, F }, { R_3(0x79b), "divrl", I_FP, REG, 3, FL2,FL2,F2 }, { R_3(0x79c), "mulrl", I_FP, REG, 3, FL2,FL2,F2 }, { R_3(0x79d), "subrl", I_FP, REG, 3, FL2,FL2,F2 }, { R_3(0x79f), "addrl", I_FP, REG, 3, FL2,FL2,F2 }, /* These are the floating point branch instructions. Each actually * generates 2 branch instructions: the first a CTRL instruction with * the indicated opcode, and the second a 'bno'. */ { 0x12000000, "brue", I_FP, FBRA, 1 }, { 0x11000000, "brug", I_FP, FBRA, 1 }, { 0x13000000, "bruge", I_FP, FBRA, 1 }, { 0x14000000, "brul", I_FP, FBRA, 1 }, { 0x16000000, "brule", I_FP, FBRA, 1 }, { 0x15000000, "brulg", I_FP, FBRA, 1 }, /* Decimal instructions */ { R_3(0x642), "daddc", I_DEC, REG, 3, RSL,RSL,RS }, { R_3(0x643), "dsubc", I_DEC, REG, 3, RSL,RSL,RS }, { R_2D(0x644), "dmovt", I_DEC, REG, 2, RSL,RS }, /* KX extensions */ { R_2(0x600), "synmov", I_KX, REG, 2, R, R }, { R_2(0x601), "synmovl", I_KX, REG, 2, R, R }, { R_2(0x602), "synmovq", I_KX, REG, 2, R, R }, { R_2D(0x615), "synld", I_KX, REG, 2, R, R }, /* MC extensions */ { R_3(0x603), "cmpstr", I_MIL, REG, 3, R, R, RL }, { R_3(0x604), "movqstr", I_MIL, REG, 3, R, R, RL }, { R_3(0x605), "movstr", I_MIL, REG, 3, R, R, RL }, { R_2D(0x613), "inspacc", I_MIL, REG, 2, R, R }, { R_2D(0x614), "ldphy", I_MIL, REG, 2, R, R }, { R_3(0x617), "fill", I_MIL, REG, 3, R, RL, RL }, { R_2D(0x646), "condrec", I_MIL, REG, 2, R, R }, { R_2D(0x656), "receive", I_MIL, REG, 2, R, R }, { R_3(0x662), "send", I_MIL, REG, 3, R, RL, R }, { R_1(0x663), "sendserv", I_MIL, REG, 1, R }, { R_1(0x664), "resumprcs", I_MIL, REG, 1, R }, { R_1(0x665), "schedprcs", I_MIL, REG, 1, R }, { R_0(0x666), "saveprcs", I_MIL, REG, 0, }, { R_1(0x668), "condwait", I_MIL, REG, 1, R }, { R_1(0x669), "wait", I_MIL, REG, 1, R }, { R_1(0x66a), "signal", I_MIL, REG, 1, R }, { R_1D(0x673), "ldtime", I_MIL, REG, 1, R2 }, /* CX extensions */ { R_3(0x5d8), "eshro", I_CX, REG, 3, RSL,RSL,RS }, { R_3(0x630), "sdma", I_CX, REG, 3, RSL,RSL,RL }, { R_3(0x631), "udma", I_CX, REG, 0 }, { R_3(0x659), "sysctl", I_CX, REG, 3, RSL,RSL,RL }, /* END OF TABLE */ { 0, NULL, 0, 0 } }; /* end of i960-opcode.h */