@c Copyright (C) 1988,89,92,93,94,95,96,1997 Free Software Foundation, Inc. @c This is part of the GCC manual. @c For copying conditions, see the file gcc.texi. @node Invoking GCC @chapter GNU CC Command Options @cindex GNU CC command options @cindex command options @cindex options, GNU CC command When you invoke GNU CC, it normally does preprocessing, compilation, assembly and linking. The ``overall options'' allow you to stop this process at an intermediate stage. For example, the @samp{-c} option says not to run the linker. Then the output consists of object files output by the assembler. Other options are passed on to one stage of processing. Some options control the preprocessor and others the compiler itself. Yet other options control the assembler and linker; most of these are not documented here, since you rarely need to use any of them. @cindex C compilation options Most of the command line options that you can use with GNU CC are useful for C programs; when an option is only useful with another language (usually C++), the explanation says so explicitly. If the description for a particular option does not mention a source language, you can use that option with all supported languages. @cindex C++ compilation options @xref{Invoking G++,,Compiling C++ Programs}, for a summary of special options for compiling C++ programs. @cindex grouping options @cindex options, grouping The @code{gcc} program accepts options and file names as operands. Many options have multiletter names; therefore multiple single-letter options may @emph{not} be grouped: @samp{-dr} is very different from @w{@samp{-d -r}}. @cindex order of options @cindex options, order You can mix options and other arguments. For the most part, the order you use doesn't matter. Order does matter when you use several options of the same kind; for example, if you specify @samp{-L} more than once, the directories are searched in the order specified. Many options have long names starting with @samp{-f} or with @samp{-W}---for example, @samp{-fforce-mem}, @samp{-fstrength-reduce}, @samp{-Wformat} and so on. Most of these have both positive and negative forms; the negative form of @samp{-ffoo} would be @samp{-fno-foo}. This manual documents only one of these two forms, whichever one is not the default. @menu * Option Summary:: Brief list of all options, without explanations. * Overall Options:: Controlling the kind of output: an executable, object files, assembler files, or preprocessed source. * Invoking G++:: Compiling C++ programs. * C Dialect Options:: Controlling the variant of C language compiled. * C++ Dialect Options:: Variations on C++. * Warning Options:: How picky should the compiler be? * Debugging Options:: Symbol tables, measurements, and debugging dumps. * Optimize Options:: How much optimization? * Preprocessor Options:: Controlling header files and macro definitions. Also, getting dependency information for Make. * Assembler Options:: Passing options to the assembler. * Link Options:: Specifying libraries and so on. * Directory Options:: Where to find header files and libraries. Where to find the compiler executable files. * Target Options:: Running a cross-compiler, or an old version of GNU CC. * Submodel Options:: Specifying minor hardware or convention variations, such as 68010 vs 68020. * Code Gen Options:: Specifying conventions for function calls, data layout and register usage. * Environment Variables:: Env vars that affect GNU CC. * Running Protoize:: Automatically adding or removing function prototypes. @end menu @node Option Summary @section Option Summary Here is a summary of all the options, grouped by type. Explanations are in the following sections. @table @emph @item Overall Options @xref{Overall Options,,Options Controlling the Kind of Output}. @smallexample -c -S -E -o @var{file} -pipe -v -x @var{language} @end smallexample @item C Language Options @xref{C Dialect Options,,Options Controlling C Dialect}. @smallexample -ansi -fallow-single-precision -fcond-mismatch -fno-asm -fno-builtin -ffreestanding -fhosted -fsigned-bitfields -fsigned-char -funsigned-bitfields -funsigned-char -fwritable-strings -traditional -traditional-cpp -trigraphs @end smallexample @item C++ Language Options @xref{C++ Dialect Options,,Options Controlling C++ Dialect}. @smallexample -fall-virtual -fdollars-in-identifiers -felide-constructors -fenum-int-equiv -fexternal-templates -ffor-scope -fno-for-scope -fhandle-signatures -fmemoize-lookups -fname-mangling-version-@var{n} -fno-default-inline -fno-gnu-keywords -fnonnull-objects -fguiding-decls -foperator-names -fstrict-prototype -fthis-is-variable -ftemplate-depth-@var{n} -nostdinc++ -traditional +e@var{n} @end smallexample @item Warning Options @xref{Warning Options,,Options to Request or Suppress Warnings}. @smallexample -fsyntax-only -pedantic -pedantic-errors -w -W -Wall -Waggregate-return -Wbad-function-cast -Wcast-align -Wcast-qual -Wchar-subscript -Wcomment -Wconversion -Werror -Wformat -Wid-clash-@var{len} -Wimplicit -Wimplicit-int -Wimplicit-function-declarations -Wimport -Winline -Wlarger-than-@var{len} -Wmain -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-import -Wold-style-cast -Woverloaded-virtual -Wparentheses -Wpointer-arith -Wredundant-decls -Wreorder -Wreturn-type -Wshadow -Wsign-compare -Wstrict-prototypes -Wswitch -Wsynth -Wtemplate-debugging -Wtraditional -Wtrigraphs -Wundef -Wuninitialized -Wunused -Wwrite-strings @end smallexample @item Debugging Options @xref{Debugging Options,,Options for Debugging Your Program or GCC}. @smallexample -a -ax -d@var{letters} -fpretend-float -fprofile-arcs -ftest-coverage -g -g@var{level} -gcoff -gdwarf -gdwarf-1 -gdwarf-1+ -gdwarf-2 -ggdb -gstabs -gstabs+ -gxcoff -gxcoff+ -p -pg -print-file-name=@var{library} -print-libgcc-file-name -print-prog-name=@var{program} -print-search-dirs -save-temps @end smallexample @item Optimization Options @xref{Optimize Options,,Options that Control Optimization}. @smallexample -fbranch-probabilities -fcaller-saves -fcse-follow-jumps -fcse-skip-blocks -fdelayed-branch -fexpensive-optimizations -ffast-math -ffloat-store -fforce-addr -fforce-mem -ffunction-sections -finline-functions -fkeep-inline-functions -fno-default-inline -fno-defer-pop -fno-function-cse -fno-inline -fno-peephole -fomit-frame-pointer -frerun-cse-after-loop -fschedule-insns -fschedule-insns2 -fstrength-reduce -fthread-jumps -funroll-all-loops -funroll-loops -fmove-all-movables -freduce-all-givs -frerun-loop-opt -O -O0 -O1 -O2 -O3 @end smallexample @item Preprocessor Options @xref{Preprocessor Options,,Options Controlling the Preprocessor}. @smallexample -A@var{question}(@var{answer}) -C -dD -dM -dN -D@var{macro}@r{[}=@var{defn}@r{]} -E -H -idirafter @var{dir} -include @var{file} -imacros @var{file} -iprefix @var{file} -iwithprefix @var{dir} -iwithprefixbefore @var{dir} -isystem @var{dir} -M -MD -MM -MMD -MG -nostdinc -P -trigraphs -undef -U@var{macro} -Wp,@var{option} @end smallexample @item Assembler Option @xref{Assembler Options,,Passing Options to the Assembler}. @smallexample -Wa,@var{option} @end smallexample @item Linker Options @xref{Link Options,,Options for Linking}. @smallexample @var{object-file-name} -l@var{library} -nostartfiles -nodefaultlibs -nostdlib -s -static -shared -symbolic -Wl,@var{option} -Xlinker @var{option} -u @var{symbol} @end smallexample @item Directory Options @xref{Directory Options,,Options for Directory Search}. @smallexample -B@var{prefix} -I@var{dir} -I- -L@var{dir} -specs=@var{file} @end smallexample @item Target Options @c I wrote this xref this way to avoid overfull hbox. -- rms @xref{Target Options}. @smallexample -b @var{machine} -V @var{version} @end smallexample @item Machine Dependent Options @xref{Submodel Options,,Hardware Models and Configurations}. @smallexample @emph{M680x0 Options} -m68000 -m68020 -m68020-40 -m68020-60 -m68030 -m68040 -m68060 -m5200 -m68881 -mbitfield -mc68000 -mc68020 -mfpa -mnobitfield -mrtd -mshort -msoft-float -malign-int @emph{VAX Options} -mg -mgnu -munix @emph{SPARC Options} -mcpu=@var{cpu type} -mtune=@var{cpu type} -mcmodel=@var{code model} -malign-jumps=@var{num} -malign-loops=@var{num} -malign-functions=@var{num} -m32 -m64 -mapp-regs -mbroken-saverestore -mcypress -mepilogue -mflat -mfpu -mhard-float -mhard-quad-float -mimpure-text -mlive-g0 -mno-app-regs -mno-epilogue -mno-flat -mno-fpu -mno-impure-text -mno-stack-bias -mno-unaligned-doubles -msoft-float -msoft-quad-float -msparclite -mstack-bias -msupersparc -munaligned-doubles -mv8 @emph{Convex Options} -mc1 -mc2 -mc32 -mc34 -mc38 -margcount -mnoargcount -mlong32 -mlong64 -mvolatile-cache -mvolatile-nocache @emph{AMD29K Options} -m29000 -m29050 -mbw -mnbw -mdw -mndw -mlarge -mnormal -msmall -mkernel-registers -mno-reuse-arg-regs -mno-stack-check -mno-storem-bug -mreuse-arg-regs -msoft-float -mstack-check -mstorem-bug -muser-registers @emph{ARM Options} -mapcs-frame -mapcs-26 -mapcs-32 -mlittle-endian -mbig-endian -mwords-little-endian -mshort-load-bytes -mno-short-load-bytes -msoft-float -mhard-float -mbsd -mxopen -mno-symrename @emph{MN10300 Options} -mmult-bug -mno-mult-bug @emph{M32R/D Options} -mcode-model=@var{model type} -msdata=@var{sdata type} -G @var{num} @emph{M88K Options} -m88000 -m88100 -m88110 -mbig-pic -mcheck-zero-division -mhandle-large-shift -midentify-revision -mno-check-zero-division -mno-ocs-debug-info -mno-ocs-frame-position -mno-optimize-arg-area -mno-serialize-volatile -mno-underscores -mocs-debug-info -mocs-frame-position -moptimize-arg-area -mserialize-volatile -mshort-data-@var{num} -msvr3 -msvr4 -mtrap-large-shift -muse-div-instruction -mversion-03.00 -mwarn-passed-structs @emph{RS/6000 and PowerPC Options} -mcpu=@var{cpu type} -mtune=@var{cpu type} -mpower -mno-power -mpower2 -mno-power2 -mpowerpc -mno-powerpc -mpowerpc-gpopt -mno-powerpc-gpopt -mpowerpc-gfxopt -mno-powerpc-gfxopt -mnew-mnemonics -mno-new-mnemonics -mfull-toc -mminimal-toc -mno-fop-in-toc -mno-sum-in-toc -mxl-call -mno-xl-call -mthreads -mpe -msoft-float -mhard-float -mmultiple -mno-multiple -mstring -mno-string -mupdate -mno-update -mfused-madd -mno-fused-madd -mbit-align -mno-bit-align -mstrict-align -mno-strict-align -mrelocatable -mno-relocatable -mrelocatable-lib -mno-relocatable-lib -mtoc -mno-toc -mtraceback -mno-traceback -mlittle -mlittle-endian -mbig -mbig-endian -mcall-aix -mcall-sysv -mprototype -mno-prototype -msim -mmvme -mads -myellowknife -memb -msdata -msdata=@var{opt} -G @var{num} @emph{RT Options} -mcall-lib-mul -mfp-arg-in-fpregs -mfp-arg-in-gregs -mfull-fp-blocks -mhc-struct-return -min-line-mul -mminimum-fp-blocks -mnohc-struct-return @emph{MIPS Options} -mabicalls -mcpu=@var{cpu type} -membedded-data -membedded-pic -mfp32 -mfp64 -mgas -mgp32 -mgp64 -mgpopt -mhalf-pic -mhard-float -mint64 -mips1 -mips2 -mips3 -mlong64 -mlong-calls -mmemcpy -mmips-as -mmips-tfile -mno-abicalls -mno-embedded-data -mno-embedded-pic -mno-gpopt -mno-long-calls -mno-memcpy -mno-mips-tfile -mno-rnames -mno-stats -mrnames -msoft-float -m4650 -msingle-float -mmad -mstats -EL -EB -G @var{num} -nocpp @emph{i386 Options} -mcpu=@var{cpu type} -march=@var{cpu type} -mieee-fp -mno-fancy-math-387 -mno-fp-ret-in-387 -msoft-float -msvr3-shlib -mno-wide-multiply -mrtd -malign-double -mreg-alloc=@var{list} -mregparm=@var{num} -malign-jumps=@var{num} -malign-loops=@var{num} -malign-functions=@var{num} @emph{HPPA Options} -mbig-switch -mdisable-fpregs -mdisable-indexing -mfast-indirect-calls -mgas -mjump-in-delay -mlong-load-store -mno-big-switch -mno-disable-fpregs -mno-disable-indexing -mno-fast-indirect-calls -mno-gas -mno-jump-in-delay -mno-long-load-store -mno-portable-runtime -mno-soft-float -mno-space -mno-space-regs -msoft-float -mpa-risc-1-0 -mpa-risc-1-1 -mportable-runtime -mschedule=@var{list} -mspace -mspace-regs @emph{Intel 960 Options} -m@var{cpu type} -masm-compat -mclean-linkage -mcode-align -mcomplex-addr -mleaf-procedures -mic-compat -mic2.0-compat -mic3.0-compat -mintel-asm -mno-clean-linkage -mno-code-align -mno-complex-addr -mno-leaf-procedures -mno-old-align -mno-strict-align -mno-tail-call -mnumerics -mold-align -msoft-float -mstrict-align -mtail-call @emph{DEC Alpha Options} -mfp-regs -mno-fp-regs -mno-soft-float -msoft-float -malpha-as -mgas -mieee -mieee-with-inexact -mieee-conformant -mfp-trap-mode=@var{mode} -mfp-rounding-mode=@var{mode} -mtrap-precision=@var{mode} -mbuild-constants -mcpu=@var{cpu type} -mbwx -mno-bwx -mcix -mno-cix -mmax -mno-max @emph{Clipper Options} -mc300 -mc400 @emph{H8/300 Options} -mrelax -mh -ms -mint32 -malign-300 @emph{SH Options} -m1 -m2 -m3 -m3e -mb -ml -mrelax @emph{System V Options} -Qy -Qn -YP,@var{paths} -Ym,@var{dir} @emph{V850 Options} -mlong-calls -mno-long-calls -mep -mno-ep -mprolog-function -mno-prolog-function -mspace -mtda=@var{n} -msda=@var{n} -mzda=@var{n} -mv850 -mbig-switch @end smallexample @item Code Generation Options @xref{Code Gen Options,,Options for Code Generation Conventions}. @smallexample -fcall-saved-@var{reg} -fcall-used-@var{reg} -ffixed-@var{reg} -finhibit-size-directive -fcheck-memory-usage -fprefix-function-name -fno-common -fno-ident -fno-gnu-linker -fpcc-struct-return -freg-struct-return -fshared-data -fpic -fPIC -fexceptions -fshort-enums -fshort-double -fvolatile -fvolatile-global -fverbose-asm -fpack-struct -fstack-check +e0 +e1 @end smallexample @end table @menu * Overall Options:: Controlling the kind of output: an executable, object files, assembler files, or preprocessed source. * C Dialect Options:: Controlling the variant of C language compiled. * C++ Dialect Options:: Variations on C++. * Warning Options:: How picky should the compiler be? * Debugging Options:: Symbol tables, measurements, and debugging dumps. * Optimize Options:: How much optimization? * Preprocessor Options:: Controlling header files and macro definitions. Also, getting dependency information for Make. * Assembler Options:: Passing options to the assembler. * Link Options:: Specifying libraries and so on. * Directory Options:: Where to find header files and libraries. Where to find the compiler executable files. * Target Options:: Running a cross-compiler, or an old version of GNU CC. @end menu @node Overall Options @section Options Controlling the Kind of Output Compilation can involve up to four stages: preprocessing, compilation proper, assembly and linking, always in that order. The first three stages apply to an individual source file, and end by producing an object file; linking combines all the object files (those newly compiled, and those specified as input) into an executable file. @cindex file name suffix For any given input file, the file name suffix determines what kind of compilation is done: @table @code @item @var{file}.c C source code which must be preprocessed. @item @var{file}.i C source code which should not be preprocessed. @item @var{file}.ii C++ source code which should not be preprocessed. @item @var{file}.m Objective-C source code. Note that you must link with the library @file{libobjc.a} to make an Objective-C program work. @item @var{file}.h C header file (not to be compiled or linked). @item @var{file}.cc @itemx @var{file}.cxx @itemx @var{file}.cpp @itemx @var{file}.C C++ source code which must be preprocessed. Note that in @samp{.cxx}, the last two letters must both be literally @samp{x}. Likewise, @samp{.C} refers to a literal capital C. @item @var{file}.s Assembler code. @item @var{file}.S Assembler code which must be preprocessed. @item @var{other} An object file to be fed straight into linking. Any file name with no recognized suffix is treated this way. @end table You can specify the input language explicitly with the @samp{-x} option: @table @code @item -x @var{language} Specify explicitly the @var{language} for the following input files (rather than letting the compiler choose a default based on the file name suffix). This option applies to all following input files until the next @samp{-x} option. Possible values for @var{language} are: @example c objective-c c++ c-header cpp-output c++-cpp-output assembler assembler-with-cpp @end example @item -x none Turn off any specification of a language, so that subsequent files are handled according to their file name suffixes (as they are if @samp{-x} has not been used at all). @end table If you only want some of the stages of compilation, you can use @samp{-x} (or filename suffixes) to tell @code{gcc} where to start, and one of the options @samp{-c}, @samp{-S}, or @samp{-E} to say where @code{gcc} is to stop. Note that some combinations (for example, @samp{-x cpp-output -E} instruct @code{gcc} to do nothing at all. @table @code @item -c Compile or assemble the source files, but do not link. The linking stage simply is not done. The ultimate output is in the form of an object file for each source file. By default, the object file name for a source file is made by replacing the suffix @samp{.c}, @samp{.i}, @samp{.s}, etc., with @samp{.o}. Unrecognized input files, not requiring compilation or assembly, are ignored. @item -S Stop after the stage of compilation proper; do not assemble. The output is in the form of an assembler code file for each non-assembler input file specified. By default, the assembler file name for a source file is made by replacing the suffix @samp{.c}, @samp{.i}, etc., with @samp{.s}. Input files that don't require compilation are ignored. @item -E Stop after the preprocessing stage; do not run the compiler proper. The output is in the form of preprocessed source code, which is sent to the standard output. Input files which don't require preprocessing are ignored. @cindex output file option @item -o @var{file} Place output in file @var{file}. This applies regardless to whatever sort of output is being produced, whether it be an executable file, an object file, an assembler file or preprocessed C code. Since only one output file can be specified, it does not make sense to use @samp{-o} when compiling more than one input file, unless you are producing an executable file as output. If @samp{-o} is not specified, the default is to put an executable file in @file{a.out}, the object file for @file{@var{source}.@var{suffix}} in @file{@var{source}.o}, its assembler file in @file{@var{source}.s}, and all preprocessed C source on standard output.@refill @item -v Print (on standard error output) the commands executed to run the stages of compilation. Also print the version number of the compiler driver program and of the preprocessor and the compiler proper. @item -pipe Use pipes rather than temporary files for communication between the various stages of compilation. This fails to work on some systems where the assembler is unable to read from a pipe; but the GNU assembler has no trouble. @end table @node Invoking G++ @section Compiling C++ Programs @cindex suffixes for C++ source @cindex C++ source file suffixes C++ source files conventionally use one of the suffixes @samp{.C}, @samp{.cc}, @samp{cpp}, or @samp{.cxx}; preprocessed C++ files use the suffix @samp{.ii}. GNU CC recognizes files with these names and compiles them as C++ programs even if you call the compiler the same way as for compiling C programs (usually with the name @code{gcc}). @findex g++ @findex c++ However, C++ programs often require class libraries as well as a compiler that understands the C++ language---and under some circumstances, you might want to compile programs from standard input, or otherwise without a suffix that flags them as C++ programs. @code{g++} is a program that calls GNU CC with the default language set to C++, and automatically specifies linking against the C++ library. @cindex @code{g++ 1.@var{xx}} @cindex @code{g++}, separate compiler @cindex @code{g++} older version @footnote{Prior to release 2 of the compiler, there was a separate @code{g++} compiler. That version was based on GNU CC, but not integrated with it. Versions of @code{g++} with a @samp{1.@var{xx}} version number---for example, @code{g++} version 1.37 or 1.42---are much less reliable than the versions integrated with GCC 2. Moreover, combining G++ @samp{1.@var{xx}} with a version 2 GCC will simply not work.} On many systems, the script @code{g++} is also installed with the name @code{c++}. @cindex invoking @code{g++} When you compile C++ programs, you may specify many of the same command-line options that you use for compiling programs in any language; or command-line options meaningful for C and related languages; or options that are meaningful only for C++ programs. @xref{C Dialect Options,,Options Controlling C Dialect}, for explanations of options for languages related to C. @xref{C++ Dialect Options,,Options Controlling C++ Dialect}, for explanations of options that are meaningful only for C++ programs. @node C Dialect Options @section Options Controlling C Dialect @cindex dialect options @cindex language dialect options @cindex options, dialect The following options control the dialect of C (or languages derived from C, such as C++ and Objective C) that the compiler accepts: @table @code @cindex ANSI support @item -ansi Support all ANSI standard C programs. This turns off certain features of GNU C that are incompatible with ANSI C, such as the @code{asm}, @code{inline} and @code{typeof} keywords, and predefined macros such as @code{unix} and @code{vax} that identify the type of system you are using. It also enables the undesirable and rarely used ANSI trigraph feature, and it disables recognition of C++ style @samp{//} comments. The alternate keywords @code{__asm__}, @code{__extension__}, @code{__inline__} and @code{__typeof__} continue to work despite @samp{-ansi}. You would not want to use them in an ANSI C program, of course, but it is useful to put them in header files that might be included in compilations done with @samp{-ansi}. Alternate predefined macros such as @code{__unix__} and @code{__vax__} are also available, with or without @samp{-ansi}. The @samp{-ansi} option does not cause non-ANSI programs to be rejected gratuitously. For that, @samp{-pedantic} is required in addition to @samp{-ansi}. @xref{Warning Options}. The macro @code{__STRICT_ANSI__} is predefined when the @samp{-ansi} option is used. Some header files may notice this macro and refrain from declaring certain functions or defining certain macros that the ANSI standard doesn't call for; this is to avoid interfering with any programs that might use these names for other things. The functions @code{alloca}, @code{abort}, @code{exit}, and @code{_exit} are not builtin functions when @samp{-ansi} is used. @item -fno-asm Do not recognize @code{asm}, @code{inline} or @code{typeof} as a keyword, so that code can use these words as identifiers. You can use the keywords @code{__asm__}, @code{__inline__} and @code{__typeof__} instead. @samp{-ansi} implies @samp{-fno-asm}. In C++, this switch only affects the @code{typeof} keyword, since @code{asm} and @code{inline} are standard keywords. You may want to use the @samp{-fno-gnu-keywords} flag instead, as it also disables the other, C++-specific, extension keywords such as @code{headof}. @item -fno-builtin @cindex builtin functions @findex abort @findex abs @findex alloca @findex cos @findex exit @findex fabs @findex ffs @findex labs @findex memcmp @findex memcpy @findex sin @findex sqrt @findex strcmp @findex strcpy @findex strlen Don't recognize builtin functions that do not begin with two leading underscores. Currently, the functions affected include @code{abort}, @code{abs}, @code{alloca}, @code{cos}, @code{exit}, @code{fabs}, @code{ffs}, @code{labs}, @code{memcmp}, @code{memcpy}, @code{sin}, @code{sqrt}, @code{strcmp}, @code{strcpy}, and @code{strlen}. GCC normally generates special code to handle certain builtin functions more efficiently; for instance, calls to @code{alloca} may become single instructions that adjust the stack directly, and calls to @code{memcpy} may become inline copy loops. The resulting code is often both smaller and faster, but since the function calls no longer appear as such, you cannot set a breakpoint on those calls, nor can you change the behavior of the functions by linking with a different library. The @samp{-ansi} option prevents @code{alloca} and @code{ffs} from being builtin functions, since these functions do not have an ANSI standard meaning. @item -fhosted @cindex hosted environment Assert that compilation takes place in a hosted environment. This implies @samp{-fbuiltin}. A hosted environment is one in which the entire standard library is available, and in which @code{main} has a return type of @code{int}. Examples are nearly everything except a kernel. This is equivalent to @samp{-fno-freestanding}. @item -ffreestanding @cindex hosted environment Assert that compilation takes place in a freestanding environment. This implies @samp{-fno-builtin}. A freestanding environment is one in which the standard library may not exist, and program startup may not necessarily be at @code{main}. The most obvious example is an OS kernel. This is equivalent to @samp{-fno-hosted}. @item -trigraphs Support ANSI C trigraphs. You don't want to know about this brain-damage. The @samp{-ansi} option implies @samp{-trigraphs}. @cindex traditional C language @cindex C language, traditional @item -traditional Attempt to support some aspects of traditional C compilers. Specifically: @itemize @bullet @item All @code{extern} declarations take effect globally even if they are written inside of a function definition. This includes implicit declarations of functions. @item The newer keywords @code{typeof}, @code{inline}, @code{signed}, @code{const} and @code{volatile} are not recognized. (You can still use the alternative keywords such as @code{__typeof__}, @code{__inline__}, and so on.) @item Comparisons between pointers and integers are always allowed. @item Integer types @code{unsigned short} and @code{unsigned char} promote to @code{unsigned int}. @item Out-of-range floating point literals are not an error. @item Certain constructs which ANSI regards as a single invalid preprocessing number, such as @samp{0xe-0xd}, are treated as expressions instead. @item String ``constants'' are not necessarily constant; they are stored in writable space, and identical looking constants are allocated separately. (This is the same as the effect of @samp{-fwritable-strings}.) @cindex @code{longjmp} and automatic variables @item All automatic variables not declared @code{register} are preserved by @code{longjmp}. Ordinarily, GNU C follows ANSI C: automatic variables not declared @code{volatile} may be clobbered. @item @kindex \x @kindex \a @cindex escape sequences, traditional The character escape sequences @samp{\x} and @samp{\a} evaluate as the literal characters @samp{x} and @samp{a} respectively. Without @w{@samp{-traditional}}, @samp{\x} is a prefix for the hexadecimal representation of a character, and @samp{\a} produces a bell. @item In C++ programs, assignment to @code{this} is permitted with @samp{-traditional}. (The option @samp{-fthis-is-variable} also has this effect.) @end itemize You may wish to use @samp{-fno-builtin} as well as @samp{-traditional} if your program uses names that are normally GNU C builtin functions for other purposes of its own. You cannot use @samp{-traditional} if you include any header files that rely on ANSI C features. Some vendors are starting to ship systems with ANSI C header files and you cannot use @samp{-traditional} on such systems to compile files that include any system headers. The @samp{-traditional} option also enables the @samp{-traditional-cpp} option, which is described next. @item -traditional-cpp Attempt to support some aspects of traditional C preprocessors. Specifically: @itemize @bullet @item Comments convert to nothing at all, rather than to a space. This allows traditional token concatenation. @item In a preprocessing directive, the @samp{#} symbol must appear as the first character of a line. @item Macro arguments are recognized within string constants in a macro definition (and their values are stringified, though without additional quote marks, when they appear in such a context). The preprocessor always considers a string constant to end at a newline. @item @cindex detecting @w{@samp{-traditional}} The predefined macro @code{__STDC__} is not defined when you use @samp{-traditional}, but @code{__GNUC__} is (since the GNU extensions which @code{__GNUC__} indicates are not affected by @samp{-traditional}). If you need to write header files that work differently depending on whether @samp{-traditional} is in use, by testing both of these predefined macros you can distinguish four situations: GNU C, traditional GNU C, other ANSI C compilers, and other old C compilers. The predefined macro @code{__STDC_VERSION__} is also not defined when you use @samp{-traditional}. @xref{Standard Predefined,,Standard Predefined Macros,cpp.info,The C Preprocessor}, for more discussion of these and other predefined macros. @item @cindex string constants vs newline @cindex newline vs string constants The preprocessor considers a string constant to end at a newline (unless the newline is escaped with @samp{\}). (Without @w{@samp{-traditional}}, string constants can contain the newline character as typed.) @end itemize @item -fcond-mismatch Allow conditional expressions with mismatched types in the second and third arguments. The value of such an expression is void. @item -funsigned-char Let the type @code{char} be unsigned, like @code{unsigned char}. Each kind of machine has a default for what @code{char} should be. It is either like @code{unsigned char} by default or like @code{signed char} by default. Ideally, a portable program should always use @code{signed char} or @code{unsigned char} when it depends on the signedness of an object. But many programs have been written to use plain @code{char} and expect it to be signed, or expect it to be unsigned, depending on the machines they were written for. This option, and its inverse, let you make such a program work with the opposite default. The type @code{char} is always a distinct type from each of @code{signed char} or @code{unsigned char}, even though its behavior is always just like one of those two. @item -fsigned-char Let the type @code{char} be signed, like @code{signed char}. Note that this is equivalent to @samp{-fno-unsigned-char}, which is the negative form of @samp{-funsigned-char}. Likewise, the option @samp{-fno-signed-char} is equivalent to @samp{-funsigned-char}. You may wish to use @samp{-fno-builtin} as well as @samp{-traditional} if your program uses names that are normally GNU C builtin functions for other purposes of its own. You cannot use @samp{-traditional} if you include any header files that rely on ANSI C features. Some vendors are starting to ship systems with ANSI C header files and you cannot use @samp{-traditional} on such systems to compile files that include any system headers. @item -fsigned-bitfields @itemx -funsigned-bitfields @itemx -fno-signed-bitfields @itemx -fno-unsigned-bitfields These options control whether a bitfield is signed or unsigned, when the declaration does not use either @code{signed} or @code{unsigned}. By default, such a bitfield is signed, because this is consistent: the basic integer types such as @code{int} are signed types. However, when @samp{-traditional} is used, bitfields are all unsigned no matter what. @item -fwritable-strings Store string constants in the writable data segment and don't uniquize them. This is for compatibility with old programs which assume they can write into string constants. The option @samp{-traditional} also has this effect. Writing into string constants is a very bad idea; ``constants'' should be constant. @item -fallow-single-precision Do not promote single precision math operations to double precision, even when compiling with @samp{-traditional}. Traditional K&R C promotes all floating point operations to double precision, regardless of the sizes of the operands. On the architecture for which you are compiling, single precision may be faster than double precision. If you must use @samp{-traditional}, but want to use single precision operations when the operands are single precision, use this option. This option has no effect when compiling with ANSI or GNU C conventions (the default). @end table @node C++ Dialect Options @section Options Controlling C++ Dialect @cindex compiler options, C++ @cindex C++ options, command line @cindex options, C++ This section describes the command-line options that are only meaningful for C++ programs; but you can also use most of the GNU compiler options regardless of what language your program is in. For example, you might compile a file @code{firstClass.C} like this: @example g++ -g -felide-constructors -O -c firstClass.C @end example @noindent In this example, only @samp{-felide-constructors} is an option meant only for C++ programs; you can use the other options with any language supported by GNU CC. Here is a list of options that are @emph{only} for compiling C++ programs: @table @code @item -fno-access-control Turn off all access checking. This switch is mainly useful for working around bugs in the access control code. @item -fall-virtual Treat all possible member functions as virtual, implicitly. All member functions (except for constructor functions and @code{new} or @code{delete} member operators) are treated as virtual functions of the class where they appear. This does not mean that all calls to these member functions will be made through the internal table of virtual functions. Under some circumstances, the compiler can determine that a call to a given virtual function can be made directly; in these cases the calls are direct in any case. @item -fcheck-new Check that the pointer returned by @code{operator new} is non-null before attempting to modify the storage allocated. The current Working Paper requires that @code{operator new} never return a null pointer, so this check is normally unnecessary. @item -fconserve-space Put uninitialized or runtime-initialized global variables into the common segment, as C does. This saves space in the executable at the cost of not diagnosing duplicate definitions. If you compile with this flag and your program mysteriously crashes after @code{main()} has completed, you may have an object that is being destroyed twice because two definitions were merged. @item -fdollars-in-identifiers Accept @samp{$} in identifiers. You can also explicitly prohibit use of @samp{$} with the option @samp{-fno-dollars-in-identifiers}. (GNU C allows @samp{$} by default on most target systems, but there are a few exceptions.) Traditional C allowed the character @samp{$} to form part of identifiers. However, ANSI C and C++ forbid @samp{$} in identifiers. @item -fenum-int-equiv Anachronistically permit implicit conversion of @code{int} to enumeration types. Current C++ allows conversion of @code{enum} to @code{int}, but not the other way around. @item -fexternal-templates Cause template instantiations to obey @samp{#pragma interface} and @samp{implementation}; template instances are emitted or not according to the location of the template definition. @xref{Template Instantiation}, for more information. This option is deprecated. @item -falt-external-templates Similar to -fexternal-templates, but template instances are emitted or not according to the place where they are first instantiated. @xref{Template Instantiation}, for more information. This option is deprecated. @item -ffor-scope @itemx -fno-for-scope If -ffor-scope is specified, the scope of variables declared in a @i{for-init-statement} is limited to the @samp{for} loop itself, as specified by the draft C++ standard. If -fno-for-scope is specified, the scope of variables declared in a @i{for-init-statement} extends to the end of the enclosing scope, as was the case in old versions of gcc, and other (traditional) implementations of C++. The default if neither flag is given to follow the standard, but to allow and give a warning for old-style code that would otherwise be invalid, or have different behavior. @item -fno-gnu-keywords Do not recognize @code{classof}, @code{headof}, @code{signature}, @code{sigof} or @code{typeof} as a keyword, so that code can use these words as identifiers. You can use the keywords @code{__classof__}, @code{__headof__}, @code{__signature__}, @code{__sigof__}, and @code{__typeof__} instead. @samp{-ansi} implies @samp{-fno-gnu-keywords}. @item -fguiding-decls Treat a function declaration with the same type as a potential function template instantiation as though it declares that instantiation, not a normal function. If a definition is given for the function later in the translation unit (or another translation unit if the target supports weak symbols), that definition will be used; otherwise the template will be instantiated. This behavior reflects the C++ language prior to September 1996, when guiding declarations were removed. This option implies @samp{-fname-mangling-version-0}, and will not work with other name mangling versions. @item -fno-implicit-templates Never emit code for templates which are instantiated implicitly (i.e. by use); only emit code for explicit instantiations. @xref{Template Instantiation}, for more information. @item -fhandle-signatures Recognize the @code{signature} and @code{sigof} keywords for specifying abstract types. The default (@samp{-fno-handle-signatures}) is not to recognize them. @xref{C++ Signatures, Type Abstraction using Signatures}. @item -fhuge-objects Support virtual function calls for objects that exceed the size representable by a @samp{short int}. Users should not use this flag by default; if you need to use it, the compiler will tell you so. If you compile any of your code with this flag, you must compile @emph{all} of your code with this flag (including the C++ library, if you use it). This flag is not useful when compiling with -fvtable-thunks. @item -fno-implement-inlines To save space, do not emit out-of-line copies of inline functions controlled by @samp{#pragma implementation}. This will cause linker errors if these functions are not inlined everywhere they are called. @item -fmemoize-lookups @itemx -fsave-memoized Use heuristics to compile faster. These heuristics are not enabled by default, since they are only effective for certain input files. Other input files compile more slowly. The first time the compiler must build a call to a member function (or reference to a data member), it must (1) determine whether the class implements member functions of that name; (2) resolve which member function to call (which involves figuring out what sorts of type conversions need to be made); and (3) check the visibility of the member function to the caller. All of this adds up to slower compilation. Normally, the second time a call is made to that member function (or reference to that data member), it must go through the same lengthy process again. This means that code like this: @smallexample cout << "This " << p << " has " << n << " legs.\n"; @end smallexample @noindent makes six passes through all three steps. By using a software cache, a ``hit'' significantly reduces this cost. Unfortunately, using the cache introduces another layer of mechanisms which must be implemented, and so incurs its own overhead. @samp{-fmemoize-lookups} enables the software cache. Because access privileges (visibility) to members and member functions may differ from one function context to the next, G++ may need to flush the cache. With the @samp{-fmemoize-lookups} flag, the cache is flushed after every function that is compiled. The @samp{-fsave-memoized} flag enables the same software cache, but when the compiler determines that the context of the last function compiled would yield the same access privileges of the next function to compile, it preserves the cache. This is most helpful when defining many member functions for the same class: with the exception of member functions which are friends of other classes, each member function has exactly the same access privileges as every other, and the cache need not be flushed. The code that implements these flags has rotted; you should probably avoid using them. @item -fstrict-prototype Within an @samp{extern "C"} linkage specification, treat a function declaration with no arguments, such as @samp{int foo ();}, as declaring the function to take no arguments. Normally, such a declaration means that the function @code{foo} can take any combination of arguments, as in C. @samp{-pedantic} implies @samp{-fstrict-prototype} unless overridden with @samp{-fno-strict-prototype}. This flag no longer affects declarations with C++ linkage. @item -fname-mangling-version-@var{n} Control the way in which names are mangled. Version 0 is compatible with versions of g++ before 2.8. Version 1 is the default. Version 1 will allow correct mangling of function templates. For example, version 0 mangling does not mangle foo and foo given this declaration: @example template void foo(T t); @end example @item -fno-nonnull-objects Don't assume that a reference is initialized to refer to a valid object. Although the current C++ Working Paper prohibits null references, some old code may rely on them, and you can use @samp{-fno-nonnull-objects} to turn on checking. At the moment, the compiler only does this checking for conversions to virtual base classes. @item -foperator-names Recognize the operator name keywords @code{and}, @code{bitand}, @code{bitor}, @code{compl}, @code{not}, @code{or} and @code{xor} as synonyms for the symbols they refer to. @samp{-ansi} implies @samp{-foperator-names}. @item -fthis-is-variable Permit assignment to @code{this}. The incorporation of user-defined free store management into C++ has made assignment to @samp{this} an anachronism. Therefore, by default it is invalid to assign to @code{this} within a class member function; that is, GNU C++ treats @samp{this} in a member function of class @code{X} as a non-lvalue of type @samp{X *}. However, for backwards compatibility, you can make it valid with @samp{-fthis-is-variable}. @item -fvtable-thunks Use @samp{thunks} to implement the virtual function dispatch table (@samp{vtable}). The traditional (cfront-style) approach to implementing vtables was to store a pointer to the function and two offsets for adjusting the @samp{this} pointer at the call site. Newer implementations store a single pointer to a @samp{thunk} function which does any necessary adjustment and then calls the target function. This option also enables a heuristic for controlling emission of vtables; if a class has any non-inline virtual functions, the vtable will be emitted in the translation unit containing the first one of those. @item -ftemplate-depth-@var{n} Set the maximum instantiation depth for template classes to @var{n}. A limit on the template instantiation depth is needed to detect endless recursions during template class instantiation. ANSI/ISO C++ conforming programs must not rely on a maximum depth greater than 17. @item -nostdinc++ Do not search for header files in the standard directories specific to C++, but do still search the other standard directories. (This option is used when building the C++ library.) @item -traditional For C++ programs (in addition to the effects that apply to both C and C++), this has the same effect as @samp{-fthis-is-variable}. @xref{C Dialect Options,, Options Controlling C Dialect}. @end table In addition, these optimization, warning, and code generation options have meanings only for C++ programs: @table @code @item -fno-default-inline Do not assume @samp{inline} for functions defined inside a class scope. @xref{Optimize Options,,Options That Control Optimization}. @item -Wold-style-cast @itemx -Woverloaded-virtual @itemx -Wtemplate-debugging Warnings that apply only to C++ programs. @xref{Warning Options,,Options to Request or Suppress Warnings}. @item -Weffc++ Warn about violation of some style rules from Effective C++ by Scott Myers. @item +e@var{n} Control how virtual function definitions are used, in a fashion compatible with @code{cfront} 1.x. @xref{Code Gen Options,,Options for Code Generation Conventions}. @end table @node Warning Options @section Options to Request or Suppress Warnings @cindex options to control warnings @cindex warning messages @cindex messages, warning @cindex suppressing warnings Warnings are diagnostic messages that report constructions which are not inherently erroneous but which are risky or suggest there may have been an error. You can request many specific warnings with options beginning @samp{-W}, for example @samp{-Wimplicit} to request warnings on implicit declarations. Each of these specific warning options also has a negative form beginning @samp{-Wno-} to turn off warnings; for example, @samp{-Wno-implicit}. This manual lists only one of the two forms, whichever is not the default. These options control the amount and kinds of warnings produced by GNU CC: @table @code @cindex syntax checking @item -fsyntax-only Check the code for syntax errors, but don't do anything beyond that. @item -pedantic Issue all the warnings demanded by strict ANSI standard C; reject all programs that use forbidden extensions. Valid ANSI standard C programs should compile properly with or without this option (though a rare few will require @samp{-ansi}). However, without this option, certain GNU extensions and traditional C features are supported as well. With this option, they are rejected. @samp{-pedantic} does not cause warning messages for use of the alternate keywords whose names begin and end with @samp{__}. Pedantic warnings are also disabled in the expression that follows @code{__extension__}. However, only system header files should use these escape routes; application programs should avoid them. @xref{Alternate Keywords}. This option is not intended to be @i{useful}; it exists only to satisfy pedants who would otherwise claim that GNU CC fails to support the ANSI standard. Some users try to use @samp{-pedantic} to check programs for strict ANSI C conformance. They soon find that it does not do quite what they want: it finds some non-ANSI practices, but not all---only those for which ANSI C @emph{requires} a diagnostic. A feature to report any failure to conform to ANSI C might be useful in some instances, but would require considerable additional work and would be quite different from @samp{-pedantic}. We recommend, rather, that users take advantage of the extensions of GNU C and disregard the limitations of other compilers. Aside from certain supercomputers and obsolete small machines, there is less and less reason ever to use any other C compiler other than for bootstrapping GNU CC. @item -pedantic-errors Like @samp{-pedantic}, except that errors are produced rather than warnings. @item -w Inhibit all warning messages. @item -Wno-import Inhibit warning messages about the use of @samp{#import}. @item -Wchar-subscripts Warn if an array subscript has type @code{char}. This is a common cause of error, as programmers often forget that this type is signed on some machines. @item -Wcomment Warn whenever a comment-start sequence @samp{/*} appears in a @samp{/*} comment, or whenever a Backslash-Newline appears in a @samp{//} comment. @item -Wformat Check calls to @code{printf} and @code{scanf}, etc., to make sure that the arguments supplied have types appropriate to the format string specified. @item -Wimplicit-int Warn when a declaration does not specify a type. @item -Wimplicit-function-declarations Warn whenever a function is used before being declared. @item -Wimplicit Same as @samp{-Wimplicit-int} @samp{-Wimplicit-function-declaration}. @item -Wmain Warn if the type of @samp{main} is suspicious. @samp{main} should be a function with external linkage, returning int, taking either zero arguments, two, or three arguments of appropriate types. @item -Wparentheses Warn if parentheses are omitted in certain contexts, such as when there is an assignment in a context where a truth value is expected, or when operators are nested whose precedence people often get confused about. Also warn about constructions where there may be confusion to which @code{if} statement an @code{else} branch belongs. Here is an example of such a case: @smallexample @{ if (a) if (b) foo (); else bar (); @} @end smallexample In C, every @code{else} branch belongs to the innermost possible @code{if} statement, which in this example is @code{if (b)}. This is often not what the programmer expected, as illustrated in the above example by indentation the programmer chose. When there is the potential for this confusion, GNU C will issue a warning when this flag is specified. To eliminate the warning, add explicit braces around the innermost @code{if} statement so there is no way the @code{else} could belong to the enclosing @code{if}. The resulting code would look like this: @smallexample @{ if (a) @{ if (b) foo (); else bar (); @} @} @end smallexample @item -Wreturn-type Warn whenever a function is defined with a return-type that defaults to @code{int}. Also warn about any @code{return} statement with no return-value in a function whose return-type is not @code{void}. @item -Wswitch Warn whenever a @code{switch} statement has an index of enumeral type and lacks a @code{case} for one or more of the named codes of that enumeration. (The presence of a @code{default} label prevents this warning.) @code{case} labels outside the enumeration range also provoke warnings when this option is used. @item -Wtrigraphs Warn if any trigraphs are encountered (assuming they are enabled). @item -Wunused Warn whenever a variable is unused aside from its declaration, whenever a function is declared static but never defined, whenever a label is declared but not used, and whenever a statement computes a result that is explicitly not used. In order to get a warning about an unused function parameter, you must specify both @samp{-W} and @samp{-Wunused}. To suppress this warning for an expression, simply cast it to void. For unused variables and parameters, use the @samp{unused} attribute (@pxref{Variable Attributes}). @item -Wuninitialized An automatic variable is used without first being initialized. These warnings are possible only in optimizing compilation, because they require data flow information that is computed only when optimizing. If you don't specify @samp{-O}, you simply won't get these warnings. These warnings occur only for variables that are candidates for register allocation. Therefore, they do not occur for a variable that is declared @code{volatile}, or whose address is taken, or whose size is other than 1, 2, 4 or 8 bytes. Also, they do not occur for structures, unions or arrays, even when they are in registers. Note that there may be no warning about a variable that is used only to compute a value that itself is never used, because such computations may be deleted by data flow analysis before the warnings are printed. These warnings are made optional because GNU CC is not smart enough to see all the reasons why the code might be correct despite appearing to have an error. Here is one example of how this can happen: @smallexample @{ int x; switch (y) @{ case 1: x = 1; break; case 2: x = 4; break; case 3: x = 5; @} foo (x); @} @end smallexample @noindent If the value of @code{y} is always 1, 2 or 3, then @code{x} is always initialized, but GNU CC doesn't know this. Here is another common case: @smallexample @{ int save_y; if (change_y) save_y = y, y = new_y; @dots{} if (change_y) y = save_y; @} @end smallexample @noindent This has no bug because @code{save_y} is used only if it is set. Some spurious warnings can be avoided if you declare all the functions you use that never return as @code{noreturn}. @xref{Function Attributes}. @item -Wreorder (C++ only) @cindex reordering, warning @cindex warning for reordering of member initializers Warn when the order of member initializers given in the code does not match the order in which they must be executed. For instance: @smallexample struct A @{ int i; int j; A(): j (0), i (1) @{ @} @}; @end smallexample Here the compiler will warn that the member initializers for @samp{i} and @samp{j} will be rearranged to match the declaration order of the members. @item -Wtemplate-debugging @cindex template debugging When using templates in a C++ program, warn if debugging is not yet fully available (C++ only). @item -Wall All of the above @samp{-W} options combined. This enables all the warnings about constructions that some users consider questionable, and that are easy to avoid (or modify to prevent the warning), even in conjunction with macros. @end table The following @samp{-W@dots{}} options are not implied by @samp{-Wall}. Some of them warn about constructions that users generally do not consider questionable, but which occasionally you might wish to check for; others warn about constructions that are necessary or hard to avoid in some cases, and there is no simple way to modify the code to suppress the warning. @table @code @item -W Print extra warning messages for these events: @itemize @bullet @cindex @code{longjmp} warnings @item A nonvolatile automatic variable might be changed by a call to @code{longjmp}. These warnings as well are possible only in optimizing compilation. The compiler sees only the calls to @code{setjmp}. It cannot know where @code{longjmp} will be called; in fact, a signal handler could call it at any point in the code. As a result, you may get a warning even when there is in fact no problem because @code{longjmp} cannot in fact be called at the place which would cause a problem. @item A function can return either with or without a value. (Falling off the end of the function body is considered returning without a value.) For example, this function would evoke such a warning: @smallexample @group foo (a) @{ if (a > 0) return a; @} @end group @end smallexample @item An expression-statement or the left-hand side of a comma expression contains no side effects. To suppress the warning, cast the unused expression to void. For example, an expression such as @samp{x[i,j]} will cause a warning, but @samp{x[(void)i,j]} will not. @item An unsigned value is compared against zero with @samp{<} or @samp{<=}. @item A comparison like @samp{x<=y<=z} appears; this is equivalent to @samp{(x<=y ? 1 : 0) <= z}, which is a different interpretation from that of ordinary mathematical notation. @item Storage-class specifiers like @code{static} are not the first things in a declaration. According to the C Standard, this usage is obsolescent. @item If @samp{-Wall} or @samp{-Wunused} is also specified, warn about unused arguments. @item A comparison between signed and unsigned values could produce an incorrect result when the signed value is converted to unsigned. (But do not warn if @samp{-Wno-sign-compare} is also specified.) @item An aggregate has a partly bracketed initializer. For example, the following code would evoke such a warning, because braces are missing around the initializer for @code{x.h}: @smallexample struct s @{ int f, g; @}; struct t @{ struct s h; int i; @}; struct t x = @{ 1, 2, 3 @}; @end smallexample @end itemize @item -Wtraditional Warn about certain constructs that behave differently in traditional and ANSI C. @itemize @bullet @item Macro arguments occurring within string constants in the macro body. These would substitute the argument in traditional C, but are part of the constant in ANSI C. @item A function declared external in one block and then used after the end of the block. @item A @code{switch} statement has an operand of type @code{long}. @end itemize @item -Wundef Warn if an undefined identifier is evaluated in an @samp{#if} directive. @item -Wshadow Warn whenever a local variable shadows another local variable. @item -Wid-clash-@var{len} Warn whenever two distinct identifiers match in the first @var{len} characters. This may help you prepare a program that will compile with certain obsolete, brain-damaged compilers. @item -Wlarger-than-@var{len} Warn whenever an object of larger than @var{len} bytes is defined. @item -Wpointer-arith Warn about anything that depends on the ``size of'' a function type or of @code{void}. GNU C assigns these types a size of 1, for convenience in calculations with @code{void *} pointers and pointers to functions. @item -Wbad-function-cast Warn whenever a function call is cast to a non-matching type. For example, warn if @code{int malloc()} is cast to @code{anything *}. @item -Wcast-qual Warn whenever a pointer is cast so as to remove a type qualifier from the target type. For example, warn if a @code{const char *} is cast to an ordinary @code{char *}. @item -Wcast-align Warn whenever a pointer is cast such that the required alignment of the target is increased. For example, warn if a @code{char *} is cast to an @code{int *} on machines where integers can only be accessed at two- or four-byte boundaries. @item -Wwrite-strings Give string constants the type @code{const char[@var{length}]} so that copying the address of one into a non-@code{const} @code{char *} pointer will get a warning. These warnings will help you find at compile time code that can try to write into a string constant, but only if you have been very careful about using @code{const} in declarations and prototypes. Otherwise, it will just be a nuisance; this is why we did not make @samp{-Wall} request these warnings. @item -Wconversion Warn if a prototype causes a type conversion that is different from what would happen to the same argument in the absence of a prototype. This includes conversions of fixed point to floating and vice versa, and conversions changing the width or signedness of a fixed point argument except when the same as the default promotion. Also, warn if a negative integer constant expression is implicitly converted to an unsigned type. For example, warn about the assignment @code{x = -1} if @code{x} is unsigned. But do not warn about explicit casts like @code{(unsigned) -1}. @item -Wsign-compare @cindex warning for comparison of signed and unsigned values @cindex comparison of signed and unsigned values, warning @cindex signed and unsigned values, comparison warning Warn when a comparison between signed and unsigned values could produce an incorrect result when the signed value is converted to unsigned. This warning is also enabled by @samp{-W}; to get the other warnings of @samp{-W} without this warning, use @samp{-W -Wno-sign-compare}. @item -Waggregate-return Warn if any functions that return structures or unions are defined or called. (In languages where you can return an array, this also elicits a warning.) @item -Wstrict-prototypes Warn if a function is declared or defined without specifying the argument types. (An old-style function definition is permitted without a warning if preceded by a declaration which specifies the argument types.) @item -Wmissing-prototypes Warn if a global function is defined without a previous prototype declaration. This warning is issued even if the definition itself provides a prototype. The aim is to detect global functions that fail to be declared in header files. @item -Wmissing-declarations Warn if a global function is defined without a previous declaration. Do so even if the definition itself provides a prototype. Use this option to detect global functions that are not declared in header files. @item -Wredundant-decls Warn if anything is declared more than once in the same scope, even in cases where multiple declaration is valid and changes nothing. @item -Wnested-externs Warn if an @code{extern} declaration is encountered within an function. @item -Winline Warn if a function can not be inlined, and either it was declared as inline, or else the @samp{-finline-functions} option was given. @item -Wold-style-cast Warn if an old-style (C-style) cast is used within a program. @item -Woverloaded-virtual @cindex overloaded virtual fn, warning @cindex warning for overloaded virtual fn Warn when a derived class function declaration may be an error in defining a virtual function (C++ only). In a derived class, the definitions of virtual functions must match the type signature of a virtual function declared in the base class. With this option, the compiler warns when you define a function with the same name as a virtual function, but with a type signature that does not match any declarations from the base class. @item -Wsynth (C++ only) @cindex warning for synthesized methods @cindex synthesized methods, warning Warn when g++'s synthesis behavior does not match that of cfront. For instance: @smallexample struct A @{ operator int (); A& operator = (int); @}; main () @{ A a,b; a = b; @} @end smallexample In this example, g++ will synthesize a default @samp{A& operator = (const A&);}, while cfront will use the user-defined @samp{operator =}. @item -Werror Make all warnings into errors. @end table @node Debugging Options @section Options for Debugging Your Program or GNU CC @cindex options, debugging @cindex debugging information options GNU CC has various special options that are used for debugging either your program or GCC: @table @code @item -g Produce debugging information in the operating system's native format (stabs, COFF, XCOFF, or DWARF). GDB can work with this debugging information. On most systems that use stabs format, @samp{-g} enables use of extra debugging information that only GDB can use; this extra information makes debugging work better in GDB but will probably make other debuggers crash or refuse to read the program. If you want to control for certain whether to generate the extra information, use @samp{-gstabs+}, @samp{-gstabs}, @samp{-gxcoff+}, @samp{-gxcoff}, @samp{-gdwarf-1+}, or @samp{-gdwarf-1} (see below). Unlike most other C compilers, GNU CC allows you to use @samp{-g} with @samp{-O}. The shortcuts taken by optimized code may occasionally produce surprising results: some variables you declared may not exist at all; flow of control may briefly move where you did not expect it; some statements may not be executed because they compute constant results or their values were already at hand; some statements may execute in different places because they were moved out of loops. Nevertheless it proves possible to debug optimized output. This makes it reasonable to use the optimizer for programs that might have bugs. The following options are useful when GNU CC is generated with the capability for more than one debugging format. @item -ggdb Produce debugging information for use by GDB. This means to use the most expressive format available (DWARF 2, stabs, or the native format if neither of those are supported), including GDB extensions if at all possible. @item -gstabs Produce debugging information in stabs format (if that is supported), without GDB extensions. This is the format used by DBX on most BSD systems. On MIPS, Alpha and System V Release 4 systems this option produces stabs debugging output which is not understood by DBX or SDB. On System V Release 4 systems this option requires the GNU assembler. @item -gstabs+ Produce debugging information in stabs format (if that is supported), using GNU extensions understood only by the GNU debugger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program. @item -gcoff Produce debugging information in COFF format (if that is supported). This is the format used by SDB on most System V systems prior to System V Release 4. @item -gxcoff Produce debugging information in XCOFF format (if that is supported). This is the format used by the DBX debugger on IBM RS/6000 systems. @item -gxcoff+ Produce debugging information in XCOFF format (if that is supported), using GNU extensions understood only by the GNU debugger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program, and may cause assemblers other than the GNU assembler (GAS) to fail with an error. @item -gdwarf Produce debugging information in DWARF version 1 format (if that is supported). This is the format used by SDB on most System V Release 4 systems. @item -gdwarf+ Produce debugging information in DWARF version 1 format (if that is supported), using GNU extensions understood only by the GNU debugger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program. @item -gdwarf-2 Produce debugging information in DWARF version 2 format (if that is supported). This is the format used by DBX on IRIX 6. @item -g@var{level} @itemx -ggdb@var{level} @itemx -gstabs@var{level} @itemx -gcoff@var{level} @itemx -gxcoff@var{level} @itemx -gdwarf@var{level} @itemx -gdwarf-2@var{level} Request debugging information and also use @var{level} to specify how much information. The default level is 2. Level 1 produces minimal information, enough for making backtraces in parts of the program that you don't plan to debug. This includes descriptions of functions and external variables, but no information about local variables and no line numbers. Level 3 includes extra information, such as all the macro definitions present in the program. Some debuggers support macro expansion when you use @samp{-g3}. @cindex @code{prof} @item -p Generate extra code to write profile information suitable for the analysis program @code{prof}. You must use this option when compiling the source files you want data about, and you must also use it when linking. @cindex @code{gprof} @item -pg Generate extra code to write profile information suitable for the analysis program @code{gprof}. You must use this option when compiling the source files you want data about, and you must also use it when linking. @cindex @code{tcov} @item -a Generate extra code to write profile information for basic blocks, which will record the number of times each basic block is executed, the basic block start address, and the function name containing the basic block. If @samp{-g} is used, the line number and filename of the start of the basic block will also be recorded. If not overridden by the machine description, the default action is to append to the text file @file{bb.out}. This data could be analyzed by a program like @code{tcov}. Note, however, that the format of the data is not what @code{tcov} expects. Eventually GNU @code{gprof} should be extended to process this data. @item -ax Generate extra code to profile basic blocks. Your executable will produce output that is a superset of that produced when @samp{-a} is used. Additional output is the source and target address of the basic blocks where a jump takes place, the number of times a jump is executed, and (optionally) the complete sequence of basic blocks being executed. The output is appended to file @file{bb.out}. You can examine different profiling aspects without recompilation. Your executable will read a list of function names from file @file{bb.in}. Profiling starts when a function on the list is entered and stops when that invocation is exited. To exclude a function from profiling, prefix its name with `-'. If a function name is not unique, you can disambiguate it by writing it in the form @samp{/path/filename.d:functionname}. Your executable will write the available paths and filenames in file @file{bb.out}. Several function names have a special meaning: @table @code @item __bb_jumps__ Write source, target and frequency of jumps to file @file{bb.out}. @item __bb_hidecall__ Exclude function calls from frequency count. @item __bb_showret__ Include function returns in frequency count. @item __bb_trace__ Write the sequence of basic blocks executed to file @file{bbtrace.gz}. The file will be compressed using the program @samp{gzip}, which must exist in your @code{PATH}. On systems without the @samp{popen} function, the file will be named @file{bbtrace} and will not be compressed. @strong{Profiling for even a few seconds on these systems will produce a very large file.} Note: @code{__bb_hidecall__} and @code{__bb_showret__} will not affect the sequence written to @file{bbtrace.gz}. @end table Here's a short example using different profiling parameters in file @file{bb.in}. Assume function @code{foo} consists of basic blocks 1 and 2 and is called twice from block 3 of function @code{main}. After the calls, block 3 transfers control to block 4 of @code{main}. With @code{__bb_trace__} and @code{main} contained in file @file{bb.in}, the following sequence of blocks is written to file @file{bbtrace.gz}: 0 3 1 2 1 2 4. The return from block 2 to block 3 is not shown, because the return is to a point inside the block and not to the top. The block address 0 always indicates, that control is transferred to the trace from somewhere outside the observed functions. With @samp{-foo} added to @file{bb.in}, the blocks of function @code{foo} are removed from the trace, so only 0 3 4 remains. With @code{__bb_jumps__} and @code{main} contained in file @file{bb.in}, jump frequencies will be written to file @file{bb.out}. The frequencies are obtained by constructing a trace of blocks and incrementing a counter for every neighbouring pair of blocks in the trace. The trace 0 3 1 2 1 2 4 displays the following frequencies: @example Jump from block 0x0 to block 0x3 executed 1 time(s) Jump from block 0x3 to block 0x1 executed 1 time(s) Jump from block 0x1 to block 0x2 executed 2 time(s) Jump from block 0x2 to block 0x1 executed 1 time(s) Jump from block 0x2 to block 0x4 executed 1 time(s) @end example With @code{__bb_hidecall__}, control transfer due to call instructions is removed from the trace, that is the trace is cut into three parts: 0 3 4, 0 1 2 and 0 1 2. With @code{__bb_showret__}, control transfer due to return instructions is added to the trace. The trace becomes: 0 3 1 2 3 1 2 3 4. Note, that this trace is not the same, as the sequence written to @file{bbtrace.gz}. It is solely used for counting jump frequencies. @item -fprofile-arcs Instrument @dfn{arcs} during compilation. For each function of your program, GNU CC creates a program flow graph, then finds a spanning tree for the graph. Only arcs that are not on the spanning tree have to be instrumented: the compiler adds code to count the number of times that these arcs are executed. When an arc is the only exit or only entrance to a block, the instrumentation code can be added to the block; otherwise, a new basic block must be created to hold the instrumentation code. Since not every arc in the program must be instrumented, programs compiled with this option run faster than programs compiled with @samp{-a}, which adds instrumentation code to every basic block in the program. The tradeoff: since @code{gcov} does not have execution counts for all branches, it must start with the execution counts for the instrumented branches, and then iterate over the program flow graph until the entire graph has been solved. Hence, @code{gcov} runs a little more slowly than a program which uses information from @samp{-a}. @samp{-fprofile-arcs} also makes it possible to estimate branch probabilities, and to calculate basic block execution counts. In general, basic block execution counts do not give enough information to estimate all branch probabilities. When the compiled program exits, it saves the arc execution counts to a file called @file{@var{sourcename}.da}. Use the compiler option @samp{-fbranch-probabilities} (@pxref{Optimize Options,,Options that Control Optimization}) when recompiling, to optimize using estimated branch probabilities. @need 2000 @item -ftest-coverage Create data files for the @code{gcov} code-coverage utility (@pxref{Gcov,, @code{gcov}: a GNU CC Test Coverage Program}). The data file names begin with the name of your source file: @table @code @item @var{sourcename}.bb A mapping from basic blocks to line numbers, which @code{gcov} uses to associate basic block execution counts with line numbers. @item @var{sourcename}.bbg A list of all arcs in the program flow graph. This allows @code{gcov} to reconstruct the program flow graph, so that it can compute all basic block and arc execution counts from the information in the @code{@var{sourcename}.da} file (this last file is the output from @samp{-fprofile-arcs}). @end table @item -Q Makes the compiler print out each function name as it is compiled, and print some statistics about each pass when it finishes. @item -d@var{letters} Says to make debugging dumps during compilation at times specified by @var{letters}. This is used for debugging the compiler. The file names for most of the dumps are made by appending a word to the source file name (e.g. @file{foo.c.rtl} or @file{foo.c.jump}). Here are the possible letters for use in @var{letters}, and their meanings: @table @samp @item M Dump all macro definitions, at the end of preprocessing, and write no output. @item N Dump all macro names, at the end of preprocessing. @item D Dump all macro definitions, at the end of preprocessing, in addition to normal output. @item y Dump debugging information during parsing, to standard error. @item r Dump after RTL generation, to @file{@var{file}.rtl}. @item x Just generate RTL for a function instead of compiling it. Usually used with @samp{r}. @item j Dump after first jump optimization, to @file{@var{file}.jump}. @item s Dump after CSE (including the jump optimization that sometimes follows CSE), to @file{@var{file}.cse}. @item D Dump after purging ADDRESSOF, to @file{@var{file}.addressof}. @item L Dump after loop optimization, to @file{@var{file}.loop}. @item t Dump after the second CSE pass (including the jump optimization that sometimes follows CSE), to @file{@var{file}.cse2}. @item b Dump after computing branch probabilities, to @file{@var{file}.bp}. @item f Dump after flow analysis, to @file{@var{file}.flow}. @item c Dump after instruction combination, to the file @file{@var{file}.combine}. @item S Dump after the first instruction scheduling pass, to @file{@var{file}.sched}. @item l Dump after local register allocation, to @file{@var{file}.lreg}. @item g Dump after global register allocation, to @file{@var{file}.greg}. @item R Dump after the second instruction scheduling pass, to @file{@var{file}.sched2}. @item J Dump after last jump optimization, to @file{@var{file}.jump2}. @item d Dump after delayed branch scheduling, to @file{@var{file}.dbr}. @item k Dump after conversion from registers to stack, to @file{@var{file}.stack}. @item a Produce all the dumps listed above. @item m Print statistics on memory usage, at the end of the run, to standard error. @item p Annotate the assembler output with a comment indicating which pattern and alternative was used. @item A Annotate the assembler output with miscellaneous debugging information. @end table @item -fpretend-float When running a cross-compiler, pretend that the target machine uses the same floating point format as the host machine. This causes incorrect output of the actual floating constants, but the actual instruction sequence will probably be the same as GNU CC would make when running on the target machine. @item -save-temps Store the usual ``temporary'' intermediate files permanently; place them in the current directory and name them based on the source file. Thus, compiling @file{foo.c} with @samp{-c -save-temps} would produce files @file{foo.i} and @file{foo.s}, as well as @file{foo.o}. @item -print-file-name=@var{library} Print the full absolute name of the library file @var{library} that would be used when linking---and don't do anything else. With this option, GNU CC does not compile or link anything; it just prints the file name. @item -print-prog-name=@var{program} Like @samp{-print-file-name}, but searches for a program such as @samp{cpp}. @item -print-libgcc-file-name Same as @samp{-print-file-name=libgcc.a}. This is useful when you use @samp{-nostdlib} or @samp{-nodefaultlibs} but you do want to link with @file{libgcc.a}. You can do @example gcc -nostdlib @var{files}@dots{} `gcc -print-libgcc-file-name` @end example @item -print-search-dirs Print the name of the configured installation directory and a list of program and library directories gcc will search---and don't do anything else. This is useful when gcc prints the error message @samp{installation problem, cannot exec cpp: No such file or directory}. To resolve this you either need to put @file{cpp} and the other compiler components where gcc expects to find them, or you can set the environment variable @code{GCC_EXEC_PREFIX} to the directory where you installed them. Don't forget the trailing '/'. @xref{Environment Variables}. @end table @node Optimize Options @section Options That Control Optimization @cindex optimize options @cindex options, optimization These options control various sorts of optimizations: @table @code @item -O @itemx -O1 Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function. Without @samp{-O}, the compiler's goal is to reduce the cost of compilation and to make debugging produce the expected results. Statements are independent: if you stop the program with a breakpoint between statements, you can then assign a new value to any variable or change the program counter to any other statement in the function and get exactly the results you would expect from the source code. Without @samp{-O}, the compiler only allocates variables declared @code{register} in registers. The resulting compiled code is a little worse than produced by PCC without @samp{-O}. With @samp{-O}, the compiler tries to reduce code size and execution time. When you specify @samp{-O}, the compiler turns on @samp{-fthread-jumps} and @samp{-fdefer-pop} on all machines. The compiler turns on @samp{-fdelayed-branch} on machines that have delay slots, and @samp{-fomit-frame-pointer} on machines that can support debugging even without a frame pointer. On some machines the compiler also turns on other flags.@refill @item -O2 Optimize even more. GNU CC performs nearly all supported optimizations that do not involve a space-speed tradeoff. The compiler does not perform loop unrolling or function inlining when you specify @samp{-O2}. As compared to @samp{-O}, this option increases both compilation time and the performance of the generated code. @samp{-O2} turns on all optional optimizations except for loop unrolling and function inlining. It also turns on the @samp{-fforce-mem} option on all machines and frame pointer elimination on machines where doing so does not interfere with debugging. @item -O3 Optimize yet more. @samp{-O3} turns on all optimizations specified by @samp{-O2} and also turns on the @samp{inline-functions} option. @item -O0 Do not optimize. If you use multiple @samp{-O} options, with or without level numbers, the last such option is the one that is effective. @end table Options of the form @samp{-f@var{flag}} specify machine-independent flags. Most flags have both positive and negative forms; the negative form of @samp{-ffoo} would be @samp{-fno-foo}. In the table below, only one of the forms is listed---the one which is not the default. You can figure out the other form by either removing @samp{no-} or adding it. @table @code @item -ffloat-store Do not store floating point variables in registers, and inhibit other options that might change whether a floating point value is taken from a register or memory. @cindex floating point precision This option prevents undesirable excess precision on machines such as the 68000 where the floating registers (of the 68881) keep more precision than a @code{double} is supposed to have. Similarly for the x86 architecture. For most programs, the excess precision does only good, but a few programs rely on the precise definition of IEEE floating point. Use @samp{-ffloat-store} for such programs. @item -fno-default-inline Do not make member functions inline by default merely because they are defined inside the class scope (C++ only). Otherwise, when you specify @w{@samp{-O}}, member functions defined inside class scope are compiled inline by default; i.e., you don't need to add @samp{inline} in front of the member function name. @item -fno-defer-pop Always pop the arguments to each function call as soon as that function returns. For machines which must pop arguments after a function call, the compiler normally lets arguments accumulate on the stack for several function calls and pops them all at once. @item -fforce-mem Force memory operands to be copied into registers before doing arithmetic on them. This produces better code by making all memory references potential common subexpressions. When they are not common subexpressions, instruction combination should eliminate the separate register-load. The @samp{-O2} option turns on this option. @item -fforce-addr Force memory address constants to be copied into registers before doing arithmetic on them. This may produce better code just as @samp{-fforce-mem} may. @item -fomit-frame-pointer Don't keep the frame pointer in a register for functions that don't need one. This avoids the instructions to save, set up and restore frame pointers; it also makes an extra register available in many functions. @strong{It also makes debugging impossible on some machines.} @ifset INTERNALS On some machines, such as the Vax, this flag has no effect, because the standard calling sequence automatically handles the frame pointer and nothing is saved by pretending it doesn't exist. The machine-description macro @code{FRAME_POINTER_REQUIRED} controls whether a target machine supports this flag. @xref{Registers}.@refill @end ifset @ifclear INTERNALS On some machines, such as the Vax, this flag has no effect, because the standard calling sequence automatically handles the frame pointer and nothing is saved by pretending it doesn't exist. The machine-description macro @code{FRAME_POINTER_REQUIRED} controls whether a target machine supports this flag. @xref{Registers,,Register Usage, gcc.info, Using and Porting GCC}.@refill @end ifclear @item -fno-inline Don't pay attention to the @code{inline} keyword. Normally this option is used to keep the compiler from expanding any functions inline. Note that if you are not optimizing, no functions can be expanded inline. @item -finline-functions Integrate all simple functions into their callers. The compiler heuristically decides which functions are simple enough to be worth integrating in this way. If all calls to a given function are integrated, and the function is declared @code{static}, then the function is normally not output as assembler code in its own right. @item -fkeep-inline-functions Even if all calls to a given function are integrated, and the function is declared @code{static}, nevertheless output a separate run-time callable version of the function. This switch does not affect @code{extern inline} functions. @item -fkeep-static-consts Emit variables declared @code{static const} when optimization isn't turned on, even if the variables aren't referenced. GNU CC enables this option by default. If you want to force the compiler to check if the variable was referenced, regardless of whether or not optimization is turned on, use the @samp{-fno-keep-static-consts} option. @item -fno-function-cse Do not put function addresses in registers; make each instruction that calls a constant function contain the function's address explicitly. This option results in less efficient code, but some strange hacks that alter the assembler output may be confused by the optimizations performed when this option is not used. @item -ffast-math This option allows GCC to violate some ANSI or IEEE rules and/or specifications in the interest of optimizing code for speed. For example, it allows the compiler to assume arguments to the @code{sqrt} function are non-negative numbers and that no floating-point values are NaNs. This option should never be turned on by any @samp{-O} option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ANSI rules/specifications for math functions. @end table @c following causes underfulls.. they don't look great, but we deal. @c --mew 26jan93 The following options control specific optimizations. The @samp{-O2} option turns on all of these optimizations except @samp{-funroll-loops} and @samp{-funroll-all-loops}. On most machines, the @samp{-O} option turns on the @samp{-fthread-jumps} and @samp{-fdelayed-branch} options, but specific machines may handle it differently. You can use the following flags in the rare cases when ``fine-tuning'' of optimizations to be performed is desired. @table @code @item -fstrength-reduce Perform the optimizations of loop strength reduction and elimination of iteration variables. @item -fthread-jumps Perform optimizations where we check to see if a jump branches to a location where another comparison subsumed by the first is found. If so, the first branch is redirected to either the destination of the second branch or a point immediately following it, depending on whether the condition is known to be true or false. @item -fcse-follow-jumps In common subexpression elimination, scan through jump instructions when the target of the jump is not reached by any other path. For example, when CSE encounters an @code{if} statement with an @code{else} clause, CSE will follow the jump when the condition tested is false. @item -fcse-skip-blocks This is similar to @samp{-fcse-follow-jumps}, but causes CSE to follow jumps which conditionally skip over blocks. When CSE encounters a simple @code{if} statement with no else clause, @samp{-fcse-skip-blocks} causes CSE to follow the jump around the body of the @code{if}. @item -frerun-cse-after-loop Re-run common subexpression elimination after loop optimizations has been performed. @item -fexpensive-optimizations Perform a number of minor optimizations that are relatively expensive. @item -fdelayed-branch If supported for the target machine, attempt to reorder instructions to exploit instruction slots available after delayed branch instructions. @item -fschedule-insns If supported for the target machine, attempt to reorder instructions to eliminate execution stalls due to required data being unavailable. This helps machines that have slow floating point or memory load instructions by allowing other instructions to be issued until the result of the load or floating point instruction is required. @item -fschedule-insns2 Similar to @samp{-fschedule-insns}, but requests an additional pass of instruction scheduling after register allocation has been done. This is especially useful on machines with a relatively small number of registers and where memory load instructions take more than one cycle. @item -ffunction-sections Place each function into its own section in the output file if the target supports arbitrary sections. The function's name determines the section's name in the output file. Use this option on systems where the linker can perform optimizations to improve locality of reference in the instruction space. HPPA processors running HP-UX and Sparc processors running Solaris 2 have linkers with such optimizations. Other systems using the ELF object format as well as AIX may have these optimizations in the future. Only use this option when there are significant benefits from doing so. When you specify this option, the assembler and linker will create larger object and executable files and will also be slower. You will not be able to use @code{gprof} on all systems if you specify this option and you may have problems with debugging if you specify both this option and @samp{-g}. @item -fcaller-saves Enable values to be allocated in registers that will be clobbered by function calls, by emitting extra instructions to save and restore the registers around such calls. Such allocation is done only when it seems to result in better code than would otherwise be produced. This option is enabled by default on certain machines, usually those which have no call-preserved registers to use instead. @item -funroll-loops Perform the optimization of loop unrolling. This is only done for loops whose number of iterations can be determined at compile time or run time. @samp{-funroll-loop} implies both @samp{-fstrength-reduce} and @samp{-frerun-cse-after-loop}. @item -funroll-all-loops Perform the optimization of loop unrolling. This is done for all loops and usually makes programs run more slowly. @samp{-funroll-all-loops} implies @samp{-fstrength-reduce} as well as @samp{-frerun-cse-after-loop}. @item -fmove-all-movables Forces all invariant computations in loops to be moved outside the loop. This option is provided primarily to improve performance for some Fortran code, though it might improve code written in other languages. @emph{Note:} When compiling programs written in Fortran, this option is enabled by default. Analysis of Fortran code optimization and the resulting optimizations triggered by this option, and the @samp{-freduce-all-givs} and @samp{-frerun-loop-opt} options as well, were contributed by Toon Moene (@code{toon@@moene.indiv.nluug.nl}). Please let us (@code{fortran@@gnu.ai.mit.edu}) know how use of these options affects the performance of your production code. We're very interested in code that runs @emph{slower} when these options are @emph{enabled}. @item -freduce-all-givs Forces all general-induction variables in loops to be strength-reduced. This option is provided primarily to improve performance for some Fortran code, though it might improve code written in other languages. @emph{Note:} When compiling programs written in Fortran, this option is enabled by default. @item -frerun-loop-opt Runs loop optimizations a second time. This option is provided primarily to improve performance for some Fortran code, though it might improve code written in other languages. @emph{Note:} When compiling programs written in Fortran, this option is enabled by default. @item -fno-peephole Disable any machine-specific peephole optimizations. @item -fbranch-probabilities After running a program compiled with @samp{-fprofile-arcs} (@pxref{Debugging Options,, Options for Debugging Your Program or @code{gcc}}), you can compile it a second time using @samp{-fbranch-probabilities}, to improve optimizations based on guessing the path a branch might take. @ifset INTERNALS With @samp{-fbranch-probabilities}, GNU CC puts a @samp{REG_EXEC_COUNT} note on the first instruction of each basic block, and a @samp{REG_BR_PROB} note on each @samp{JUMP_INSN} and @samp{CALL_INSN}. These can be used to improve optimization. Currently, they are only used in one place: in @file{reorg.c}, instead of guessing which path a branch is mostly to take, the @samp{REG_BR_PROB} values are used to exactly determine which path is taken more often. @end ifset @end table @node Preprocessor Options @section Options Controlling the Preprocessor @cindex preprocessor options @cindex options, preprocessor These options control the C preprocessor, which is run on each C source file before actual compilation. If you use the @samp{-E} option, nothing is done except preprocessing. Some of these options make sense only together with @samp{-E} because they cause the preprocessor output to be unsuitable for actual compilation. @table @code @item -include @var{file} Process @var{file} as input before processing the regular input file. In effect, the contents of @var{file} are compiled first. Any @samp{-D} and @samp{-U} options on the command line are always processed before @samp{-include @var{file}}, regardless of the order in which they are written. All the @samp{-include} and @samp{-imacros} options are processed in the order in which they are written. @item -imacros @var{file} Process @var{file} as input, discarding the resulting output, before processing the regular input file. Because the output generated from @var{file} is discarded, the only effect of @samp{-imacros @var{file}} is to make the macros defined in @var{file} available for use in the main input. Any @samp{-D} and @samp{-U} options on the command line are always processed before @samp{-imacros @var{file}}, regardless of the order in which they are written. All the @samp{-include} and @samp{-imacros} options are processed in the order in which they are written. @item -idirafter @var{dir} @cindex second include path Add the directory @var{dir} to the second include path. The directories on the second include path are searched when a header file is not found in any of the directories in the main include path (the one that @samp{-I} adds to). @item -iprefix @var{prefix} Specify @var{prefix} as the prefix for subsequent @samp{-iwithprefix} options. @item -iwithprefix @var{dir} Add a directory to the second include path. The directory's name is made by concatenating @var{prefix} and @var{dir}, where @var{prefix} was specified previously with @samp{-iprefix}. If you have not specified a prefix yet, the directory containing the installed passes of the compiler is used as the default. @item -iwithprefixbefore @var{dir} Add a directory to the main include path. The directory's name is made by concatenating @var{prefix} and @var{dir}, as in the case of @samp{-iwithprefix}. @item -isystem @var{dir} Add a directory to the beginning of the second include path, marking it as a system directory, so that it gets the same special treatment as is applied to the standard system directories. @item -nostdinc Do not search the standard system directories for header files. Only the directories you have specified with @samp{-I} options (and the current directory, if appropriate) are searched. @xref{Directory Options}, for information on @samp{-I}. By using both @samp{-nostdinc} and @samp{-I-}, you can limit the include-file search path to only those directories you specify explicitly. @item -undef Do not predefine any nonstandard macros. (Including architecture flags). @item -E Run only the C preprocessor. Preprocess all the C source files specified and output the results to standard output or to the specified output file. @item -C Tell the preprocessor not to discard comments. Used with the @samp{-E} option. @item -P Tell the preprocessor not to generate @samp{#line} directives. Used with the @samp{-E} option. @cindex make @cindex dependencies, make @item -M Tell the preprocessor to output a rule suitable for @code{make} describing the dependencies of each object file. For each source file, the preprocessor outputs one @code{make}-rule whose target is the object file name for that source file and whose dependencies are all the @code{#include} header files it uses. This rule may be a single line or may be continued with @samp{\}-newline if it is long. The list of rules is printed on standard output instead of the preprocessed C program. @samp{-M} implies @samp{-E}. Another way to specify output of a @code{make} rule is by setting the environment variable @code{DEPENDENCIES_OUTPUT} (@pxref{Environment Variables}). @item -MM Like @samp{-M} but the output mentions only the user header files included with @samp{#include "@var{file}"}. System header files included with @samp{#include <@var{file}>} are omitted. @item -MD Like @samp{-M} but the dependency information is written to a file made by replacing ".c" with ".d" at the end of the input file names. This is in addition to compiling the file as specified---@samp{-MD} does not inhibit ordinary compilation the way @samp{-M} does. In Mach, you can use the utility @code{md} to merge multiple dependency files into a single dependency file suitable for using with the @samp{make} command. @item -MMD Like @samp{-MD} except mention only user header files, not system header files. @item -MG Treat missing header files as generated files and assume they live in the same directory as the source file. If you specify @samp{-MG}, you must also specify either @samp{-M} or @samp{-MM}. @samp{-MG} is not supported with @samp{-MD} or @samp{-MMD}. @item -H Print the name of each header file used, in addition to other normal activities. @item -A@var{question}(@var{answer}) Assert the answer @var{answer} for @var{question}, in case it is tested with a preprocessing conditional such as @samp{#if #@var{question}(@var{answer})}. @samp{-A-} disables the standard assertions that normally describe the target machine. @item -D@var{macro} Define macro @var{macro} with the string @samp{1} as its definition. @item -D@var{macro}=@var{defn} Define macro @var{macro} as @var{defn}. All instances of @samp{-D} on the command line are processed before any @samp{-U} options. @item -U@var{macro} Undefine macro @var{macro}. @samp{-U} options are evaluated after all @samp{-D} options, but before any @samp{-include} and @samp{-imacros} options. @item -dM Tell the preprocessor to output only a list of the macro definitions that are in effect at the end of preprocessing. Used with the @samp{-E} option. @item -dD Tell the preprocessing to pass all macro definitions into the output, in their proper sequence in the rest of the output. @item -dN Like @samp{-dD} except that the macro arguments and contents are omitted. Only @samp{#define @var{name}} is included in the output. @item -trigraphs Support ANSI C trigraphs. The @samp{-ansi} option also has this effect. @item -Wp,@var{option} Pass @var{option} as an option to the preprocessor. If @var{option} contains commas, it is split into multiple options at the commas. @end table @node Assembler Options @section Passing Options to the Assembler @c prevent bad page break with this line You can pass options to the assembler. @table @code @item -Wa,@var{option} Pass @var{option} as an option to the assembler. If @var{option} contains commas, it is split into multiple options at the commas. @end table @node Link Options @section Options for Linking @cindex link options @cindex options, linking These options come into play when the compiler links object files into an executable output file. They are meaningless if the compiler is not doing a link step. @table @code @cindex file names @item @var{object-file-name} A file name that does not end in a special recognized suffix is considered to name an object file or library. (Object files are distinguished from libraries by the linker according to the file contents.) If linking is done, these object files are used as input to the linker. @item -c @itemx -S @itemx -E If any of these options is used, then the linker is not run, and object file names should not be used as arguments. @xref{Overall Options}. @cindex Libraries @item -l@var{library} Search the library named @var{library} when linking. It makes a difference where in the command you write this option; the linker searches processes libraries and object files in the order they are specified. Thus, @samp{foo.o -lz bar.o} searches library @samp{z} after file @file{foo.o} but before @file{bar.o}. If @file{bar.o} refers to functions in @samp{z}, those functions may not be loaded. The linker searches a standard list of directories for the library, which is actually a file named @file{lib@var{library}.a}. The linker then uses this file as if it had been specified precisely by name. The directories searched include several standard system directories plus any that you specify with @samp{-L}. Normally the files found this way are library files---archive files whose members are object files. The linker handles an archive file by scanning through it for members which define symbols that have so far been referenced but not defined. But if the file that is found is an ordinary object file, it is linked in the usual fashion. The only difference between using an @samp{-l} option and specifying a file name is that @samp{-l} surrounds @var{library} with @samp{lib} and @samp{.a} and searches several directories. @item -lobjc You need this special case of the @samp{-l} option in order to link an Objective C program. @item -nostartfiles Do not use the standard system startup files when linking. The standard system libraries are used normally, unless @code{-nostdlib} or @code{-nodefaultlibs} is used. @item -nodefaultlibs Do not use the standard system libraries when linking. Only the libraries you specify will be passed to the linker. The standard startup files are used normally, unless @code{-nostartfiles} is used. @item -nostdlib Do not use the standard system startup files or libraries when linking. No startup files and only the libraries you specify will be passed to the linker. @cindex @code{-lgcc}, use with @code{-nostdlib} @cindex @code{-nostdlib} and unresolved references @cindex unresolved references and @code{-nostdlib} @cindex @code{-lgcc}, use with @code{-nodefaultlibs} @cindex @code{-nodefaultlibs} and unresolved references @cindex unresolved references and @code{-nodefaultlibs} One of the standard libraries bypassed by @samp{-nostdlib} and @samp{-nodefaultlibs} is @file{libgcc.a}, a library of internal subroutines that GNU CC uses to overcome shortcomings of particular machines, or special needs for some languages. @ifset INTERNALS (@xref{Interface,,Interfacing to GNU CC Output}, for more discussion of @file{libgcc.a}.) @end ifset @ifclear INTERNALS (@xref{Interface,,Interfacing to GNU CC Output,gcc.info,Porting GNU CC}, for more discussion of @file{libgcc.a}.) @end ifclear In most cases, you need @file{libgcc.a} even when you want to avoid other standard libraries. In other words, when you specify @samp{-nostdlib} or @samp{-nodefaultlibs} you should usually specify @samp{-lgcc} as well. This ensures that you have no unresolved references to internal GNU CC library subroutines. (For example, @samp{__main}, used to ensure C++ constructors will be called; @pxref{Collect2,,@code{collect2}}.) @item -s Remove all symbol table and relocation information from the executable. @item -static On systems that support dynamic linking, this prevents linking with the shared libraries. On other systems, this option has no effect. @item -shared Produce a shared object which can then be linked with other objects to form an executable. Not all systems support this option. You must also specify @samp{-fpic} or @samp{-fPIC} on some systems when you specify this option. @item -symbolic Bind references to global symbols when building a shared object. Warn about any unresolved references (unless overridden by the link editor option @samp{-Xlinker -z -Xlinker defs}). Only a few systems support this option. @item -Xlinker @var{option} Pass @var{option} as an option to the linker. You can use this to supply system-specific linker options which GNU CC does not know how to recognize. If you want to pass an option that takes an argument, you must use @samp{-Xlinker} twice, once for the option and once for the argument. For example, to pass @samp{-assert definitions}, you must write @samp{-Xlinker -assert -Xlinker definitions}. It does not work to write @samp{-Xlinker "-assert definitions"}, because this passes the entire string as a single argument, which is not what the linker expects. @item -Wl,@var{option} Pass @var{option} as an option to the linker. If @var{option} contains commas, it is split into multiple options at the commas. @item -u @var{symbol} Pretend the symbol @var{symbol} is undefined, to force linking of library modules to define it. You can use @samp{-u} multiple times with different symbols to force loading of additional library modules. @end table @node Directory Options @section Options for Directory Search @cindex directory options @cindex options, directory search @cindex search path These options specify directories to search for header files, for libraries and for parts of the compiler: @table @code @item -I@var{dir} Add the directory @var{dir} to the head of the list of directories to be searched for header files. This can be used to override a system header file, substituting your own version, since these directories are searched before the system header file directories. If you use more than one @samp{-I} option, the directories are scanned in left-to-right order; the standard system directories come after. @item -I- Any directories you specify with @samp{-I} options before the @samp{-I-} option are searched only for the case of @samp{#include "@var{file}"}; they are not searched for @samp{#include <@var{file}>}. If additional directories are specified with @samp{-I} options after the @samp{-I-}, these directories are searched for all @samp{#include} directives. (Ordinarily @emph{all} @samp{-I} directories are used this way.) In addition, the @samp{-I-} option inhibits the use of the current directory (where the current input file came from) as the first search directory for @samp{#include "@var{file}"}. There is no way to override this effect of @samp{-I-}. With @samp{-I.} you can specify searching the directory which was current when the compiler was invoked. That is not exactly the same as what the preprocessor does by default, but it is often satisfactory. @samp{-I-} does not inhibit the use of the standard system directories for header files. Thus, @samp{-I-} and @samp{-nostdinc} are independent. @item -L@var{dir} Add directory @var{dir} to the list of directories to be searched for @samp{-l}. @item -B@var{prefix} This option specifies where to find the executables, libraries, include files, and data files of the compiler itself. The compiler driver program runs one or more of the subprograms @file{cpp}, @file{cc1}, @file{as} and @file{ld}. It tries @var{prefix} as a prefix for each program it tries to run, both with and without @samp{@var{machine}/@var{version}/} (@pxref{Target Options}). For each subprogram to be run, the compiler driver first tries the @samp{-B} prefix, if any. If that name is not found, or if @samp{-B} was not specified, the driver tries two standard prefixes, which are @file{/usr/lib/gcc/} and @file{/usr/local/lib/gcc-lib/}. If neither of those results in a file name that is found, the unmodified program name is searched for using the directories specified in your @samp{PATH} environment variable. @samp{-B} prefixes that effectively specify directory names also apply to libraries in the linker, because the compiler translates these options into @samp{-L} options for the linker. They also apply to includes files in the preprocessor, because the compiler translates these options into @samp{-isystem} options for the preprocessor. In this case, the compiler appends @samp{include} to the prefix. The run-time support file @file{libgcc.a} can also be searched for using the @samp{-B} prefix, if needed. If it is not found there, the two standard prefixes above are tried, and that is all. The file is left out of the link if it is not found by those means. Another way to specify a prefix much like the @samp{-B} prefix is to use the environment variable @code{GCC_EXEC_PREFIX}. @xref{Environment Variables}. @item -specs=@var{file} Process @var{file} after the compiler reads in the standard @file{specs} file, in order to override the defaults that the @file{gcc} driver program uses when determining what switches to pass to @file{cc1}, @file{cc1plus}, @file{as}, @file{ld}, etc. More than one @samp{-specs=}@var{file} can be specified on the command line, and they are processed in order, from left to right. @end table @node Target Options @section Specifying Target Machine and Compiler Version @cindex target options @cindex cross compiling @cindex specifying machine version @cindex specifying compiler version and target machine @cindex compiler version, specifying @cindex target machine, specifying By default, GNU CC compiles code for the same type of machine that you are using. However, it can also be installed as a cross-compiler, to compile for some other type of machine. In fact, several different configurations of GNU CC, for different target machines, can be installed side by side. Then you specify which one to use with the @samp{-b} option. In addition, older and newer versions of GNU CC can be installed side by side. One of them (probably the newest) will be the default, but you may sometimes wish to use another. @table @code @item -b @var{machine} The argument @var{machine} specifies the target machine for compilation. This is useful when you have installed GNU CC as a cross-compiler. The value to use for @var{machine} is the same as was specified as the machine type when configuring GNU CC as a cross-compiler. For example, if a cross-compiler was configured with @samp{configure i386v}, meaning to compile for an 80386 running System V, then you would specify @samp{-b i386v} to run that cross compiler. When you do not specify @samp{-b}, it normally means to compile for the same type of machine that you are using. @item -V @var{version} The argument @var{version} specifies which version of GNU CC to run. This is useful when multiple versions are installed. For example, @var{version} might be @samp{2.0}, meaning to run GNU CC version 2.0. The default version, when you do not specify @samp{-V}, is the last version of GNU CC that you installed. @end table The @samp{-b} and @samp{-V} options actually work by controlling part of the file name used for the executable files and libraries used for compilation. A given version of GNU CC, for a given target machine, is normally kept in the directory @file{/usr/local/lib/gcc-lib/@var{machine}/@var{version}}.@refill Thus, sites can customize the effect of @samp{-b} or @samp{-V} either by changing the names of these directories or adding alternate names (or symbolic links). If in directory @file{/usr/local/lib/gcc-lib/} the file @file{80386} is a link to the file @file{i386v}, then @samp{-b 80386} becomes an alias for @samp{-b i386v}. In one respect, the @samp{-b} or @samp{-V} do not completely change to a different compiler: the top-level driver program @code{gcc} that you originally invoked continues to run and invoke the other executables (preprocessor, compiler per se, assembler and linker) that do the real work. However, since no real work is done in the driver program, it usually does not matter that the driver program in use is not the one for the specified target and version. The only way that the driver program depends on the target machine is in the parsing and handling of special machine-specific options. However, this is controlled by a file which is found, along with the other executables, in the directory for the specified version and target machine. As a result, a single installed driver program adapts to any specified target machine and compiler version. The driver program executable does control one significant thing, however: the default version and target machine. Therefore, you can install different instances of the driver program, compiled for different targets or versions, under different names. For example, if the driver for version 2.0 is installed as @code{ogcc} and that for version 2.1 is installed as @code{gcc}, then the command @code{gcc} will use version 2.1 by default, while @code{ogcc} will use 2.0 by default. However, you can choose either version with either command with the @samp{-V} option. @node Submodel Options @section Hardware Models and Configurations @cindex submodel options @cindex specifying hardware config @cindex hardware models and configurations, specifying @cindex machine dependent options Earlier we discussed the standard option @samp{-b} which chooses among different installed compilers for completely different target machines, such as Vax vs. 68000 vs. 80386. In addition, each of these target machine types can have its own special options, starting with @samp{-m}, to choose among various hardware models or configurations---for example, 68010 vs 68020, floating coprocessor or none. A single installed version of the compiler can compile for any model or configuration, according to the options specified. Some configurations of the compiler also support additional special options, usually for compatibility with other compilers on the same platform. @ifset INTERNALS These options are defined by the macro @code{TARGET_SWITCHES} in the machine description. The default for the options is also defined by that macro, which enables you to change the defaults. @end ifset @menu * M680x0 Options:: * VAX Options:: * SPARC Options:: * Convex Options:: * AMD29K Options:: * ARM Options:: * MN10300 Options:: * M32R/D Options:: * M88K Options:: * RS/6000 and PowerPC Options:: * RT Options:: * MIPS Options:: * i386 Options:: * HPPA Options:: * Intel 960 Options:: * DEC Alpha Options:: * Clipper Options:: * H8/300 Options:: * SH Options:: * System V Options:: * V850 Options:: @end menu @node M680x0 Options @subsection M680x0 Options @cindex M680x0 options These are the @samp{-m} options defined for the 68000 series. The default values for these options depends on which style of 68000 was selected when the compiler was configured; the defaults for the most common choices are given below. @table @code @item -m68000 @itemx -mc68000 Generate output for a 68000. This is the default when the compiler is configured for 68000-based systems. @item -m68020 @itemx -mc68020 Generate output for a 68020. This is the default when the compiler is configured for 68020-based systems. @item -m68881 Generate output containing 68881 instructions for floating point. This is the default for most 68020 systems unless @samp{-nfp} was specified when the compiler was configured. @item -m68030 Generate output for a 68030. This is the default when the compiler is configured for 68030-based systems. @item -m68040 Generate output for a 68040. This is the default when the compiler is configured for 68040-based systems. This option inhibits the use of 68881/68882 instructions that have to be emulated by software on the 68040. If your 68040 does not have code to emulate those instructions, use @samp{-m68040}. @item -m68060 Generate output for a 68060. This is the default when the compiler is configured for 68060-based systems. This option inhibits the use of 68020 and 68881/68882 instructions that have to be emulated by software on the 68060. If your 68060 does not have code to emulate those instructions, use @samp{-m68060}. @item -m5200 Generate output for a 520X "coldfire" family cpu. This is the default when the compiler is configured for 520X-based systems. @item -m68020-40 Generate output for a 68040, without using any of the new instructions. This results in code which can run relatively efficiently on either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68040. @item -m68020-60 Generate output for a 68060, without using any of the new instructions. This results in code which can run relatively efficiently on either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68060. @item -mfpa Generate output containing Sun FPA instructions for floating point. @item -msoft-float Generate output containing library calls for floating point. @strong{Warning:} the requisite libraries are not available for all m68k targets. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets @samp{m68k-*-aout} and @samp{m68k-*-coff} do provide software floating point support. @item -mshort Consider type @code{int} to be 16 bits wide, like @code{short int}. @item -mnobitfield Do not use the bit-field instructions. The @samp{-m68000} option implies @w{@samp{-mnobitfield}}. @item -mbitfield Do use the bit-field instructions. The @samp{-m68020} option implies @samp{-mbitfield}. This is the default if you use a configuration designed for a 68020. @item -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return with the @code{rtd} instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the arguments there. This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix compiler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including @code{printf}); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Normally, extra arguments are harmlessly ignored.) The @code{rtd} instruction is supported by the 68010, 68020, 68030, 68040, and 68060 processors, but not by the 68000 or 5200. @item -malign-int @itemx -mno-align-int Control whether GNU CC aligns @code{int}, @code{long}, @code{long long}, @code{float}, @code{double}, and @code{long double} variables on a 32-bit boundary (@samp{-malign-int}) or a 16-bit boundary (@samp{-mno-align-int}). Aligning variables on 32-bit boundaries produces code that runs somewhat faster on processors with 32-bit busses at the expense of more memory. @strong{Warning:} if you use the @samp{-malign-int} switch, GNU CC will align structures containing the above types differently than most published application binary interface specifications for the m68k. @end table @node VAX Options @subsection VAX Options @cindex VAX options These @samp{-m} options are defined for the Vax: @table @code @item -munix Do not output certain jump instructions (@code{aobleq} and so on) that the Unix assembler for the Vax cannot handle across long ranges. @item -mgnu Do output those jump instructions, on the assumption that you will assemble with the GNU assembler. @item -mg Output code for g-format floating point numbers instead of d-format. @end table @node SPARC Options @subsection SPARC Options @cindex SPARC options These @samp{-m} switches are supported on the SPARC: @table @code @item -mno-app-regs @itemx -mapp-regs Specify @samp{-mapp-regs} to generate output using the global registers 2 through 4, which the SPARC SVR4 ABI reserves for applications. This is the default. To be fully SVR4 ABI compliant at the cost of some performance loss, specify @samp{-mno-app-regs}. You should compile libraries and system software with this option. @item -mfpu @itemx -mhard-float Generate output containing floating point instructions. This is the default. @item -mno-fpu @itemx -msoft-float Generate output containing library calls for floating point. @strong{Warning:} the requisite libraries are not available for all SPARC targets. Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets @samp{sparc-*-aout} and @samp{sparclite-*-*} do provide software floating point support. @samp{-msoft-float} changes the calling convention in the output file; therefore, it is only useful if you compile @emph{all} of a program with this option. In particular, you need to compile @file{libgcc.a}, the library that comes with GNU CC, with @samp{-msoft-float} in order for this to work. @item -mhard-quad-float Generate output containing quad-word (long double) floating point instructions. @item -msoft-quad-float Generate output containing library calls for quad-word (long double) floating point instructions. The functions called are those specified in the SPARC ABI. This is the default. As of this writing, there are no sparc implementations that have hardware support for the quad-word floating point instructions. They all invoke a trap handler for one of these instructions, and then the trap handler emulates the effect of the instruction. Because of the trap handler overhead, this is much slower than calling the ABI library routines. Thus the @samp{-msoft-quad-float} option is the default. @item -mno-epilogue @itemx -mepilogue With @samp{-mepilogue} (the default), the compiler always emits code for function exit at the end of each function. Any function exit in the middle of the function (such as a return statement in C) will generate a jump to the exit code at the end of the function. With @samp{-mno-epilogue}, the compiler tries to emit exit code inline at every function exit. @item -mno-flat @itemx -mflat With @samp{-mflat}, the compiler does not generate save/restore instructions and will use a "flat" or single register window calling convention. This model uses %i7 as the frame pointer and is compatible with the normal register window model. Code from either may be intermixed. The local registers and the input registers (0-5) are still treated as "call saved" registers and will be saved on the stack as necessary. With @samp{-mno-flat} (the default), the compiler emits save/restore instructions (except for leaf functions) and is the normal mode of operation. @item -mno-unaligned-doubles @itemx -munaligned-doubles Assume that doubles have 8 byte alignment. This is the default. With @samp{-munaligned-doubles}, GNU CC assumes that doubles have 8 byte alignment only if they are contained in another type, or if they have an absolute address. Otherwise, it assumes they have 4 byte alignment. Specifying this option avoids some rare compatibility problems with code generated by other compilers. It is not the default because it results in a performance loss, especially for floating point code. @item -mv8 @itemx -msparclite These two options select variations on the SPARC architecture. By default (unless specifically configured for the Fujitsu SPARClite), GCC generates code for the v7 variant of the SPARC architecture. @samp{-mv8} will give you SPARC v8 code. The only difference from v7 code is that the compiler emits the integer multiply and integer divide instructions which exist in SPARC v8 but not in SPARC v7. @samp{-msparclite} will give you SPARClite code. This adds the integer multiply, integer divide step and scan (@code{ffs}) instructions which exist in SPARClite but not in SPARC v7. These options are deprecated and will be deleted in GNU CC 2.9. They have been replaced with @samp{-mcpu=xxx}. @item -mcypress @itemx -msupersparc These two options select the processor for which the code is optimised. With @samp{-mcypress} (the default), the compiler optimizes code for the Cypress CY7C602 chip, as used in the SparcStation/SparcServer 3xx series. This is also appropriate for the older SparcStation 1, 2, IPX etc. With @samp{-msupersparc} the compiler optimizes code for the SuperSparc cpu, as used in the SparcStation 10, 1000 and 2000 series. This flag also enables use of the full SPARC v8 instruction set. These options are deprecated and will be deleted in GNU CC 2.9. They have been replaced with @samp{-mcpu=xxx}. @item -mcpu=@var{cpu_type} Set the instruction set, register set, and instruction scheduling parameters for machine type @var{cpu_type}. Supported values for @var{cpu_type} are @samp{v7}, @samp{cypress}, @samp{v8}, @samp{supersparc}, @samp{sparclite}, @samp{f930}, @samp{f934}, @samp{sparclet}, @samp{tsc701}, @samp{v9}, and @samp{ultrasparc}. Default instruction scheduling parameters are used for values that select an architecture and not an implementation. These are @samp{v7}, @samp{v8}, @samp{sparclite}, @samp{sparclet}, @samp{v9}. Here is a list of each supported architecture and their supported implementations. @smallexample v7: cypress v8: supersparc sparclite: f930, f934 sparclet: tsc701 v9: ultrasparc @end smallexample @item -mtune=@var{cpu_type} Set the instruction scheduling parameters for machine type @var{cpu_type}, but do not set the instruction set or register set that the option @samp{-mcpu=}@var{cpu_type} would. The same values for @samp{-mcpu=}@var{cpu_type} are used for @samp{-mtune=}@var{cpu_type}, though the only useful values are those that select a particular cpu implementation: @samp{cypress}, @samp{supersparc}, @samp{f930}, @samp{f934}, @samp{tsc701}, @samp{ultrasparc}. @item -malign-loops=@var{num} Align loops to a 2 raised to a @var{num} byte boundary. If @samp{-malign-loops} is not specified, the default is 2. @item -malign-jumps=@var{num} Align instructions that are only jumped to to a 2 raised to a @var{num} byte boundary. If @samp{-malign-jumps} is not specified, the default is 2. @item -malign-functions=@var{num} Align the start of functions to a 2 raised to @var{num} byte boundary. If @samp{-malign-functions} is not specified, the default is 2 if compiling for 32 bit sparc, and 5 if compiling for 64 bit sparc. @end table These @samp{-m} switches are supported in addition to the above on the SPARCLET processor. @table @code @item -mlittle-endian Generate code for a processor running in little-endian mode. @item -mlive-g0 Treat register @code{%g0} as a normal register. GCC will continue to clobber it as necessary but will not assume it always reads as 0. @item -mbroken-saverestore Generate code that does not use non-trivial forms of the @code{save} and @code{restore} instructions. Early versions of the SPARCLET processor do not correctly handle @code{save} and @code{restore} instructions used with arguments. They correctly handle them used without arguments. A @code{save} instruction used without arguments increments the current window pointer but does not allocate a new stack frame. It is assumed that the window overflow trap handler will properly handle this case as will interrupt handlers. @end table These @samp{-m} switches are supported in addition to the above on SPARC V9 processors in 64 bit environments. @table @code @item -mlittle-endian Generate code for a processor running in little-endian mode. @item -m32 @itemx -m64 Generate code for a 32 bit or 64 bit environment. The 32 bit environment sets int, long and pointer to 32 bits. The 64 bit environment sets int to 32 bits and long and pointer to 64 bits. @item -mcmodel=medlow Generate code for the Medium/Low code model: the program must be linked in the low 32 bits of the address space. Pointers are 64 bits. Programs can be statically or dynamically linked. @item -mcmodel=medmid Generate code for the Medium/Middle code model: the program must be linked in the low 44 bits of the address space, the text segment must be less than 2G bytes, and data segment must be within 2G of the text segment. Pointers are 64 bits. @item -mcmodel=medany Generate code for the Medium/Anywhere code model: the program may be linked anywhere in the address space, the text segment must be less than 2G bytes, and data segment must be within 2G of the text segment. Pointers are 64 bits. @item -mcmodel=embmedany Generate code for the Medium/Anywhere code model for embedded systems: assume a 32 bit text and a 32 bit data segment, both starting anywhere (determined at link time). Register %g4 points to the base of the data segment. Pointers still 64 bits. Programs are statically linked, PIC is not supported. @item -mstack-bias @itemx -mno-stack-bias With @samp{-mstack-bias}, GNU CC assumes that the stack pointer, and frame pointer if present, are offset by -2047 which must be added back when making stack frame references. Otherwise, assume no such offset is present. @end table @node Convex Options @subsection Convex Options @cindex Convex options These @samp{-m} options are defined for Convex: @table @code @item -mc1 Generate output for C1. The code will run on any Convex machine. The preprocessor symbol @code{__convex__c1__} is defined. @item -mc2 Generate output for C2. Uses instructions not available on C1. Scheduling and other optimizations are chosen for max performance on C2. The preprocessor symbol @code{__convex_c2__} is defined. @item -mc32 Generate output for C32xx. Uses instructions not available on C1. Scheduling and other optimizations are chosen for max performance on C32. The preprocessor symbol @code{__convex_c32__} is defined. @item -mc34 Generate output for C34xx. Uses instructions not available on C1. Scheduling and other optimizations are chosen for max performance on C34. The preprocessor symbol @code{__convex_c34__} is defined. @item -mc38 Generate output for C38xx. Uses instructions not available on C1. Scheduling and other optimizations are chosen for max performance on C38. The preprocessor symbol @code{__convex_c38__} is defined. @item -margcount Generate code which puts an argument count in the word preceding each argument list. This is compatible with regular CC, and a few programs may need the argument count word. GDB and other source-level debuggers do not need it; this info is in the symbol table. @item -mnoargcount Omit the argument count word. This is the default. @item -mvolatile-cache Allow volatile references to be cached. This is the default. @item -mvolatile-nocache Volatile references bypass the data cache, going all the way to memory. This is only needed for multi-processor code that does not use standard synchronization instructions. Making non-volatile references to volatile locations will not necessarily work. @item -mlong32 Type long is 32 bits, the same as type int. This is the default. @item -mlong64 Type long is 64 bits, the same as type long long. This option is useless, because no library support exists for it. @end table @node AMD29K Options @subsection AMD29K Options @cindex AMD29K options These @samp{-m} options are defined for the AMD Am29000: @table @code @item -mdw @kindex -mdw @cindex DW bit (29k) Generate code that assumes the @code{DW} bit is set, i.e., that byte and halfword operations are directly supported by the hardware. This is the default. @item -mndw @kindex -mndw Generate code that assumes the @code{DW} bit is not set. @item -mbw @kindex -mbw @cindex byte writes (29k) Generate code that assumes the system supports byte and halfword write operations. This is the default. @item -mnbw @kindex -mnbw Generate code that assumes the systems does not support byte and halfword write operations. @samp{-mnbw} implies @samp{-mndw}. @item -msmall @kindex -msmall @cindex memory model (29k) Use a small memory model that assumes that all function addresses are either within a single 256 KB segment or at an absolute address of less than 256k. This allows the @code{call} instruction to be used instead of a @code{const}, @code{consth}, @code{calli} sequence. @item -mnormal @kindex -mnormal Use the normal memory model: Generate @code{call} instructions only when calling functions in the same file and @code{calli} instructions otherwise. This works if each file occupies less than 256 KB but allows the entire executable to be larger than 256 KB. This is the default. @item -mlarge Always use @code{calli} instructions. Specify this option if you expect a single file to compile into more than 256 KB of code. @item -m29050 @kindex -m29050 @cindex processor selection (29k) Generate code for the Am29050. @item -m29000 @kindex -m29000 Generate code for the Am29000. This is the default. @item -mkernel-registers @kindex -mkernel-registers @cindex kernel and user registers (29k) Generate references to registers @code{gr64-gr95} instead of to registers @code{gr96-gr127}. This option can be used when compiling kernel code that wants a set of global registers disjoint from that used by user-mode code. Note that when this option is used, register names in @samp{-f} flags must use the normal, user-mode, names. @item -muser-registers @kindex -muser-registers Use the normal set of global registers, @code{gr96-gr127}. This is the default. @item -mstack-check @itemx -mno-stack-check @kindex -mstack-check @cindex stack checks (29k) Insert (or do not insert) a call to @code{__msp_check} after each stack adjustment. This is often used for kernel code. @item -mstorem-bug @itemx -mno-storem-bug @kindex -mstorem-bug @cindex storem bug (29k) @samp{-mstorem-bug} handles 29k processors which cannot handle the separation of a mtsrim insn and a storem instruction (most 29000 chips to date, but not the 29050). @item -mno-reuse-arg-regs @itemx -mreuse-arg-regs @kindex -mreuse-arg-regs @samp{-mno-reuse-arg-regs} tells the compiler to only use incoming argument registers for copying out arguments. This helps detect calling a function with fewer arguments than it was declared with. @item -mno-impure-text @itemx -mimpure-text @kindex -mimpure-text @samp{-mimpure-text}, used in addition to @samp{-shared}, tells the compiler to not pass @samp{-assert pure-text} to the linker when linking a shared object. @item -msoft-float @kindex -msoft-float Generate output containing library calls for floating point. @strong{Warning:} the requisite libraries are not part of GNU CC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. @end table @node ARM Options @subsection ARM Options @cindex ARM options These @samp{-m} options are defined for Advanced RISC Machines (ARM) architectures: @table @code @item -mapcs-frame @kindex -mapcs-frame Generate a stack frame that is compliant with the ARM Procedure Call Standard for all functions, even if this is not strictly necessary for correct execution of the code. @item -mapcs-26 @kindex -mapcs-26 Generate code for a processor running with a 26-bit program counter, and conforming to the function calling standards for the APCS 26-bit option. This option replaces the @samp{-m2} and @samp{-m3} options of previous releases of the compiler. @item -mapcs-32 @kindex -mapcs-32 Generate code for a processor running with a 32-bit program counter, and conforming to the function calling standards for the APCS 32-bit option. This option replaces the @samp{-m6} option of previous releases of the compiler. @item -mhard-float Generate output containing floating point instructions. This is the default. @item -msoft-float Generate output containing library calls for floating point. @strong{Warning:} the requisite libraries are not available for all ARM targets. Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. @samp{-msoft-float} changes the calling convention in the output file; therefore, it is only useful if you compile @emph{all} of a program with this option. In particular, you need to compile @file{libgcc.a}, the library that comes with GNU CC, with @samp{-msoft-float} in order for this to work. @item -mlittle-endian Generate code for a processor running in little-endian mode. This is the default for all standard configurations. @item -mbig-endian Generate code for a processor running in big-endian mode; the default is to compile code for a little-endian processor. @item -mwords-little-endian This option only applies when generating code for big-endian processors. Generate code for a little-endian word order but a big-endian byte order. That is, a byte order of the form @samp{32107654}. Note: this option should only be used if you require compatibility with code for big-endian ARM processors generated by versions of the compiler prior to 2.8. @item -mshort-load-bytes @kindex -mshort-load-bytes Do not try to load half-words (eg @samp{short}s) by loading a word from an unaligned address. For some targets the MMU is configured to trap unaligned loads; use this option to generate code that is safe in these environments. @item -mno-short-load-bytes @kindex -mno-short-load-bytes Use unaligned word loads to load half-words (eg @samp{short}s). This option produces more efficient code, but the MMU is sometimes configured to trap these instructions. @item -mbsd @kindex -mbsd This option only applies to RISC iX. Emulate the native BSD-mode compiler. This is the default if @samp{-ansi} is not specified. @item -mxopen @kindex -mxopen This option only applies to RISC iX. Emulate the native X/Open-mode compiler. @item -mno-symrename @kindex -mno-symrename This option only applies to RISC iX. Do not run the assembler post-processor, @samp{symrename}, after code has been assembled. Normally it is necessary to modify some of the standard symbols in preparation for linking with the RISC iX C library; this option suppresses this pass. The post-processor is never run when the compiler is built for cross-compilation. @end table @node MN10300 Options @subsection MN10300 Options @cindex MN10300 options These @samp{-m} options are defined for Matsushita MN10300 architectures: @table @code @item -mmult-bug Generate code to avoid bugs in the multiply instructions for the MN10300 processors. This is the default. @item -mno-mult-bug Do not generate code to avoid bugs in the multiply instructions for the MN10300 processors. @end table @node M32R/D Options @subsection M32R/D Options @cindex M32R/D options These @samp{-m} options are defined for Mitsubishi M32R/D architectures: @table @code @item -mcode-model=small Assume all objects live in the lower 16MB of memory (so that their addresses can be loaded with the @code{ld24} instruction), and assume all subroutines are reachable with the @code{bl} instruction. This is the default. The addressability of a particular object can be set with the @code{model} attribute. @item -mcode-model=medium Assume objects may be anywhere in the 32 bit address space (the compiler will generate @code{seth/add3} instructions to load their addresses), and assume all subroutines are reachable with the @code{bl} instruction. @item -mcode-model=large Assume objects may be anywhere in the 32 bit address space (the compiler will generate @code{seth/add3} instructions to load their addresses), and assume subroutines may not be reachable with the @code{bl} instruction (the compiler will generate the much slower @code{seth/add3/jl} instruction sequence). @item -msdata=none Disable use of the small data area. Variables will be put into one of @samp{.data}, @samp{bss}, or @samp{.rodata} (unless the @code{section} attribute has been specified). This is the default. The small data area consists of sections @samp{.sdata} and @samp{.sbss}. Objects may be explicitly put in the small data area with the @code{section} attribute using one of these sections. @item -msdata=sdata Put small global and static data in the small data area, but do not generate special code to reference them. @item -msdata=use Put small global and static data in the small data area, and generate special instructions to reference them. @item -G @var{num} @cindex smaller data references Put global and static objects less than or equal to @var{num} bytes into the small data or bss sections instead of the normal data or bss sections. The default value of @var{num} is 8. The @samp{-msdata} option must be set to one of @samp{sdata} or @samp{use} for this option to have any effect. All modules should be compiled with the same @samp{-G @var{num}} value. Compiling with different values of @var{num} may or may not work; if it doesn't the linker will give an error message - incorrect code will not be generated. @end table @node M88K Options @subsection M88K Options @cindex M88k options These @samp{-m} options are defined for Motorola 88k architectures: @table @code @item -m88000 @kindex -m88000 Generate code that works well on both the m88100 and the m88110. @item -m88100 @kindex -m88100 Generate code that works best for the m88100, but that also runs on the m88110. @item -m88110 @kindex -m88110 Generate code that works best for the m88110, and may not run on the m88100. @item -mbig-pic @kindex -mbig-pic Obsolete option to be removed from the next revision. Use @samp{-fPIC}. @item -midentify-revision @kindex -midentify-revision @kindex ident @cindex identifying source, compiler (88k) Include an @code{ident} directive in the assembler output recording the source file name, compiler name and version, timestamp, and compilation flags used. @item -mno-underscores @kindex -mno-underscores @cindex underscores, avoiding (88k) In assembler output, emit symbol names without adding an underscore character at the beginning of each name. The default is to use an underscore as prefix on each name. @item -mocs-debug-info @itemx -mno-ocs-debug-info @kindex -mocs-debug-info @kindex -mno-ocs-debug-info @cindex OCS (88k) @cindex debugging, 88k OCS Include (or omit) additional debugging information (about registers used in each stack frame) as specified in the 88open Object Compatibility Standard, ``OCS''. This extra information allows debugging of code that has had the frame pointer eliminated. The default for DG/UX, SVr4, and Delta 88 SVr3.2 is to include this information; other 88k configurations omit this information by default. @item -mocs-frame-position @kindex -mocs-frame-position @cindex register positions in frame (88k) When emitting COFF debugging information for automatic variables and parameters stored on the stack, use the offset from the canonical frame address, which is the stack pointer (register 31) on entry to the function. The DG/UX, SVr4, Delta88 SVr3.2, and BCS configurations use @samp{-mocs-frame-position}; other 88k configurations have the default @samp{-mno-ocs-frame-position}. @item -mno-ocs-frame-position @kindex -mno-ocs-frame-position @cindex register positions in frame (88k) When emitting COFF debugging information for automatic variables and parameters stored on the stack, use the offset from the frame pointer register (register 30). When this option is in effect, the frame pointer is not eliminated when debugging information is selected by the -g switch. @item -moptimize-arg-area @itemx -mno-optimize-arg-area @kindex -moptimize-arg-area @kindex -mno-optimize-arg-area @cindex arguments in frame (88k) Control how function arguments are stored in stack frames. @samp{-moptimize-arg-area} saves space by optimizing them, but this conflicts with the 88open specifications. The opposite alternative, @samp{-mno-optimize-arg-area}, agrees with 88open standards. By default GNU CC does not optimize the argument area. @item -mshort-data-@var{num} @kindex -mshort-data-@var{num} @cindex smaller data references (88k) @cindex r0-relative references (88k) Generate smaller data references by making them relative to @code{r0}, which allows loading a value using a single instruction (rather than the usual two). You control which data references are affected by specifying @var{num} with this option. For example, if you specify @samp{-mshort-data-512}, then the data references affected are those involving displacements of less than 512 bytes. @samp{-mshort-data-@var{num}} is not effective for @var{num} greater than 64k. @item -mserialize-volatile @kindex -mserialize-volatile @itemx -mno-serialize-volatile @kindex -mno-serialize-volatile @cindex sequential consistency on 88k Do, or don't, generate code to guarantee sequential consistency of volatile memory references. By default, consistency is guaranteed. The order of memory references made by the MC88110 processor does not always match the order of the instructions requesting those references. In particular, a load instruction may execute before a preceding store instruction. Such reordering violates sequential consistency of volatile memory references, when there are multiple processors. When consistency must be guaranteed, GNU C generates special instructions, as needed, to force execution in the proper order. The MC88100 processor does not reorder memory references and so always provides sequential consistency. However, by default, GNU C generates the special instructions to guarantee consistency even when you use @samp{-m88100}, so that the code may be run on an MC88110 processor. If you intend to run your code only on the MC88100 processor, you may use @samp{-mno-serialize-volatile}. The extra code generated to guarantee consistency may affect the performance of your application. If you know that you can safely forgo this guarantee, you may use @samp{-mno-serialize-volatile}. @item -msvr4 @itemx -msvr3 @kindex -msvr4 @kindex -msvr3 @cindex assembler syntax, 88k @cindex SVr4 Turn on (@samp{-msvr4}) or off (@samp{-msvr3}) compiler extensions related to System V release 4 (SVr4). This controls the following: @enumerate @item Which variant of the assembler syntax to emit. @item @samp{-msvr4} makes the C preprocessor recognize @samp{#pragma weak} that is used on System V release 4. @item @samp{-msvr4} makes GNU CC issue additional declaration directives used in SVr4. @end enumerate @samp{-msvr4} is the default for the m88k-motorola-sysv4 and m88k-dg-dgux m88k configurations. @samp{-msvr3} is the default for all other m88k configurations. @item -mversion-03.00 @kindex -mversion-03.00 This option is obsolete, and is ignored. @c ??? which asm syntax better for GAS? option there too? @item -mno-check-zero-division @itemx -mcheck-zero-division @kindex -mno-check-zero-division @kindex -mcheck-zero-division @cindex zero division on 88k Do, or don't, generate code to guarantee that integer division by zero will be detected. By default, detection is guaranteed. Some models of the MC88100 processor fail to trap upon integer division by zero under certain conditions. By default, when compiling code that might be run on such a processor, GNU C generates code that explicitly checks for zero-valued divisors and traps with exception number 503 when one is detected. Use of mno-check-zero-division suppresses such checking for code generated to run on an MC88100 processor. GNU C assumes that the MC88110 processor correctly detects all instances of integer division by zero. When @samp{-m88110} is specified, both @samp{-mcheck-zero-division} and @samp{-mno-check-zero-division} are ignored, and no explicit checks for zero-valued divisors are generated. @item -muse-div-instruction @kindex -muse-div-instruction @cindex divide instruction, 88k Use the div instruction for signed integer division on the MC88100 processor. By default, the div instruction is not used. On the MC88100 processor the signed integer division instruction div) traps to the operating system on a negative operand. The operating system transparently completes the operation, but at a large cost in execution time. By default, when compiling code that might be run on an MC88100 processor, GNU C emulates signed integer division using the unsigned integer division instruction divu), thereby avoiding the large penalty of a trap to the operating system. Such emulation has its own, smaller, execution cost in both time and space. To the extent that your code's important signed integer division operations are performed on two nonnegative operands, it may be desirable to use the div instruction directly. On the MC88110 processor the div instruction (also known as the divs instruction) processes negative operands without trapping to the operating system. When @samp{-m88110} is specified, @samp{-muse-div-instruction} is ignored, and the div instruction is used for signed integer division. Note that the result of dividing INT_MIN by -1 is undefined. In particular, the behavior of such a division with and without @samp{-muse-div-instruction} may differ. @item -mtrap-large-shift @itemx -mhandle-large-shift @kindex -mtrap-large-shift @kindex -mhandle-large-shift @cindex bit shift overflow (88k) @cindex large bit shifts (88k) Include code to detect bit-shifts of more than 31 bits; respectively, trap such shifts or emit code to handle them properly. By default GNU CC makes no special provision for large bit shifts. @item -mwarn-passed-structs @kindex -mwarn-passed-structs @cindex structure passing (88k) Warn when a function passes a struct as an argument or result. Structure-passing conventions have changed during the evolution of the C language, and are often the source of portability problems. By default, GNU CC issues no such warning. @end table @node RS/6000 and PowerPC Options @subsection IBM RS/6000 and PowerPC Options @cindex RS/6000 and PowerPC Options @cindex IBM RS/6000 and PowerPC Options These @samp{-m} options are defined for the IBM RS/6000 and PowerPC: @table @code @item -mpower @itemx -mno-power @itemx -mpower2 @itemx -mno-power2 @itemx -mpowerpc @itemx -mno-powerpc @itemx -mpowerpc-gpopt @itemx -mno-powerpc-gpopt @itemx -mpowerpc-gfxopt @itemx -mno-powerpc-gfxopt @kindex -mpower @kindex -mpower2 @kindex -mpowerpc @kindex -mpowerpc-gpopt @kindex -mpowerpc-gfxopt GNU CC supports two related instruction set architectures for the RS/6000 and PowerPC. The @dfn{POWER} instruction set are those instructions supported by the @samp{rios} chip set used in the original RS/6000 systems and the @dfn{PowerPC} instruction set is the architecture of the Motorola MPC5xx, MPC6xx, MPC8xx microprocessors, and the IBM 4xx microprocessors. Neither architecture is a subset of the other. However there is a large common subset of instructions supported by both. An MQ register is included in processors supporting the POWER architecture. You use these options to specify which instructions are available on the processor you are using. The default value of these options is determined when configuring GNU CC. Specifying the @samp{-mcpu=@var{cpu_type}} overrides the specification of these options. We recommend you use the @samp{-mcpu=@var{cpu_type}} option rather than the options listed above. The @samp{-mpower} option allows GNU CC to generate instructions that are found only in the POWER architecture and to use the MQ register. Specifying @samp{-mpower2} implies @samp{-power} and also allows GNU CC to generate instructions that are present in the POWER2 architecture but not the original POWER architecture. The @samp{-mpowerpc} option allows GNU CC to generate instructions that are found only in the 32-bit subset of the PowerPC architecture. Specifying @samp{-mpowerpc-gpopt} implies @samp{-mpowerpc} and also allows GNU CC to use the optional PowerPC architecture instructions in the General Purpose group, including floating-point square root. Specifying @samp{-mpowerpc-gfxopt} implies @samp{-mpowerpc} and also allows GNU CC to use the optional PowerPC architecture instructions in the Graphics group, including floating-point select. If you specify both @samp{-mno-power} and @samp{-mno-powerpc}, GNU CC will use only the instructions in the common subset of both architectures plus some special AIX common-mode calls, and will not use the MQ register. Specifying both @samp{-mpower} and @samp{-mpowerpc} permits GNU CC to use any instruction from either architecture and to allow use of the MQ register; specify this for the Motorola MPC601. @item -mnew-mnemonics @itemx -mold-mnemonics @kindex -mnew-mnemonics @kindex -mold-mnemonics Select which mnemonics to use in the generated assembler code. @samp{-mnew-mnemonics} requests output that uses the assembler mnemonics defined for the PowerPC architecture, while @samp{-mold-mnemonics} requests the assembler mnemonics defined for the POWER architecture. Instructions defined in only one architecture have only one mnemonic; GNU CC uses that mnemonic irrespective of which of these options is specified. PowerPC assemblers support both the old and new mnemonics, as will later POWER assemblers. Current POWER assemblers only support the old mnemonics. Specify @samp{-mnew-mnemonics} if you have an assembler that supports them, otherwise specify @samp{-mold-mnemonics}. The default value of these options depends on how GNU CC was configured. Specifying @samp{-mcpu=@var{cpu_type}} sometimes overrides the value of these option. Unless you are building a cross-compiler, you should normally not specify either @samp{-mnew-mnemonics} or @samp{-mold-mnemonics}, but should instead accept the default. @item -mcpu=@var{cpu_type} Set architecture type, register usage, choice of mnemonics, and instruction scheduling parameters for machine type @var{cpu_type}. Supported values for @var{cpu_type} are @samp{rs6000}, @samp{rios1}, @samp{rios2}, @samp{rsc}, @samp{601}, @samp{602}, @samp{603}, @samp{603e}, @samp{604}, @samp{604e}, @samp{620}, @samp{power}, @samp{power2}, @samp{powerpc}, @samp{403}, @samp{505}, @samp{801}, @samp{821}, @samp{823}, and @samp{860} and @samp{common}. @samp{-mcpu=power}, @samp{-mcpu=power2}, and @samp{-mcpu=powerpc} specify generic POWER, POWER2 and pure PowerPC (i.e., not MPC601) architecture machine types, with an appropriate, generic processor model assumed for scheduling purposes.@refill @c overfull hbox here --bob 22 jul96 @c original text between ignore ... end ignore @ignore Specifying any of the @samp{-mcpu=rios1}, @samp{-mcpu=rios2}, @samp{-mcpu=rsc}, @samp{-mcpu=power}, or @samp{-mcpu=power2} options enables the @samp{-mpower} option and disables the @samp{-mpowerpc} option; @samp{-mcpu=601} enables both the @samp{-mpower} and @samp{-mpowerpc} options; all of @samp{-mcpu=602}, @samp{-mcpu=603}, @samp{-mcpu=603e}, @samp{-mcpu=604}, @samp{-mcpu=604e}, @samp{-mcpu=620}, @samp{-mcpu=403}, @samp{-mcpu=505}, @samp{-mcpu=801}, @samp{-mcpu=821}, @samp{-mcpu=823}, @samp{-mcpu=860} and @samp{-mcpu=powerpc} enable the @samp{-mpowerpc} option and disable the @samp{-mpower} option; @samp{-mcpu=common} disables both the @samp{-mpower} and @samp{-mpowerpc} options.@refill @end ignore @c changed paragraph Specifying any of the following options: @samp{-mcpu=rios1}, @samp{-mcpu=rios2}, @samp{-mcpu=rsc}, @samp{-mcpu=power}, or @samp{-mcpu=power2} enables the @samp{-mpower} option and disables the @samp{-mpowerpc} option; @samp{-mcpu=601} enables both the @samp{-mpower} and @samp{-mpowerpc} options. All of @samp{-mcpu=602}, @samp{-mcpu=603}, @samp{-mcpu=603e}, @samp{-mcpu=604}, @samp{-mcpu=620}, enable the @samp{-mpowerpc} option and disable the @samp{-mpower} option. Exactly similarly, all of @samp{-mcpu=403}, @samp{-mcpu=505}, @samp{-mcpu=821}, @samp{-mcpu=860} and @samp{-mcpu=powerpc} enable the @samp{-mpowerpc} option and disable the @samp{-mpower} option. @samp{-mcpu=common} disables both the @samp{-mpower} and @samp{-mpowerpc} options.@refill @c end changes to prevent overfull hboxes AIX versions 4 or greater selects @samp{-mcpu=common} by default, so that code will operate on all members of the RS/6000 and PowerPC families. In that case, GNU CC will use only the instructions in the common subset of both architectures plus some special AIX common-mode calls, and will not use the MQ register. GNU CC assumes a generic processor model for scheduling purposes. Specifying any of the options @samp{-mcpu=rios1}, @samp{-mcpu=rios2}, @samp{-mcpu=rsc}, @samp{-mcpu=power}, or @samp{-mcpu=power2} also disables the @samp{new-mnemonics} option. Specifying @samp{-mcpu=601}, @samp{-mcpu=602}, @samp{-mcpu=603}, @samp{-mcpu=603e}, @samp{-mcpu=604}, @samp{620}, @samp{403}, or @samp{-mcpu=powerpc} also enables the @samp{new-mnemonics} option.@refill Specifying @samp{-mcpu=403}, @samp{-mcpu=821}, or @samp{-mcpu=860} also enables the @samp{-msoft-float} option. @item -mtune=@var{cpu_type} Set the instruction scheduling parameters for machine type @var{cpu_type}, but do not set the architecture type, register usage, choice of mnemonics like @samp{-mcpu=}@var{cpu_type} would. The same values for @var{cpu_type} are used for @samp{-mtune=}@var{cpu_type} as for @samp{-mcpu=}@var{cpu_type}. The @samp{-mtune=}@var{cpu_type} option overrides the @samp{-mcpu=}@var{cpu_type} option in terms of instruction scheduling parameters. @item -mfull-toc @itemx -mno-fp-in-toc @itemx -mno-sum-in-toc @itemx -mminimal-toc Modify generation of the TOC (Table Of Contents), which is created for every executable file. The @samp{-mfull-toc} option is selected by default. In that case, GNU CC will allocate at least one TOC entry for each unique non-automatic variable reference in your program. GNU CC will also place floating-point constants in the TOC. However, only 16,384 entries are available in the TOC. If you receive a linker error message that saying you have overflowed the available TOC space, you can reduce the amount of TOC space used with the @samp{-mno-fp-in-toc} and @samp{-mno-sum-in-toc} options. @samp{-mno-fp-in-toc} prevents GNU CC from putting floating-point constants in the TOC and @samp{-mno-sum-in-toc} forces GNU CC to generate code to calculate the sum of an address and a constant at run-time instead of putting that sum into the TOC. You may specify one or both of these options. Each causes GNU CC to produce very slightly slower and larger code at the expense of conserving TOC space. If you still run out of space in the TOC even when you specify both of these options, specify @samp{-mminimal-toc} instead. This option causes GNU CC to make only one TOC entry for every file. When you specify this option, GNU CC will produce code that is slower and larger but which uses extremely little TOC space. You may wish to use this option only on files that contain less frequently executed code. @refill @item -mxl-call @itemx -mno-xl-call On AIX, pass floating-point arguments to prototyped functions beyond the register save area (RSA) on the stack in addition to argument FPRs. The AIX calling convention was extended but not initially documented to handle an obscure K&R C case of calling a function that takes the address of its arguments with fewer arguments than declared. AIX XL compilers assume that floating point arguments which do not fit in the RSA are on the stack when they compile a subroutine without optimization. Because always storing floating-point arguments on the stack is inefficient and rarely needed, this option is not enabled by default and only is necessary when calling subroutines compiled by AIX XL compilers without optimization. @item -mthreads Support @dfn{AIX Threads}. Link an application written to use @dfn{pthreads} with special libraries and startup code to enable the application to run. @item -mpe Support @dfn{IBM RS/6000 SP} @dfn{Parallel Environment} (PE). Link an application written to use message passing with special startup code to enable the application to run. The system must have PE installed in the standard location (@file{/usr/lpp/ppe.poe/}), or the @file{specs} file must be overridden with the @samp{-specs=} option to specify the appropriate directory location. The Parallel Environment does not support threads, so the @samp{-mpe} option and the @samp{-mthreads} option are incompatible. @item -msoft-float @itemx -mhard-float Generate code that does not use (uses) the floating-point register set. Software floating point emulation is provided if you use the @samp{-msoft-float} option, and pass the option to GNU CC when linking. @item -mmultiple @itemx -mno-multiple Generate code that uses (does not use) the load multiple word instructions and the store multiple word instructions. These instructions are generated by default on POWER systems, and not generated on PowerPC systems. Do not use @samp{-mmultiple} on little endian PowerPC systems, since those instructions do not work when the processor is in little endian mode. @item -mstring @itemx -mno-string Generate code that uses (does not use) the load string instructions and the store string word instructions to save multiple registers and do small block moves. These instructions are generated by default on POWER systems, and not generated on PowerPC systems. Do not use @samp{-mstring} on little endian PowerPC systems, since those instructions do not work when the processor is in little endian mode. @item -mupdate @itemx -mno-update Generate code that uses (does not use) the load or store instructions that update the base register to the address of the calculated memory location. These instructions are generated by default. If you use @samp{-mno-update}, there is a small window between the time that the stack pointer is updated and the address of the previous frame is stored, which means code that walks the stack frame across interrupts or signals may get corrupted data. @item -mfused-madd @itemx -mno-fused-madd Generate code that uses (does not use) the floating point multiply and accumulate instructions. These instructions are generated by default if hardware floating is used. @item -mno-bit-align @itemx -mbit-align On System V.4 and embedded PowerPC systems do not (do) force structures and unions that contain bit fields to be aligned to the base type of the bit field. For example, by default a structure containing nothing but 8 @code{unsigned} bitfields of length 1 would be aligned to a 4 byte boundary and have a size of 4 bytes. By using @samp{-mno-bit-align}, the structure would be aligned to a 1 byte boundary and be one byte in size. @item -mno-strict-align @itemx -mstrict-align On System V.4 and embedded PowerPC systems do not (do) assume that unaligned memory references will be handled by the system. @item -mrelocatable @itemx -mno-relocatable On embedded PowerPC systems generate code that allows (does not allow) the program to be relocated to a different address at runtime. If you use @samp{-mrelocatable} on any module, all objects linked together must be compiled with @samp{-mrelocatable} or @samp{-mrelocatable-lib}. @item -mrelocatable-lib @itemx -mno-relocatable-lib On embedded PowerPC systems generate code that allows (does not allow) the program to be relocated to a different address at runtime. Modules compiled with @samp{-mrelocatable-lib} can be linked with either modules compiled without @samp{-mrelocatable} and @samp{-mrelocatable-lib} or with modules compiled with the @samp{-mrelocatable} options. @item -mno-toc @itemx -mtoc On System V.4 and embedded PowerPC systems do not (do) assume that register 2 contains a pointer to a global area pointing to the addresses used in the program. @item -mno-traceback @itemx -mtraceback On embedded PowerPC systems do not (do) generate a traceback tag before the start of the function. This tag can be used by the debugger to identify where the start of a function is. @item -mlittle @itemx -mlittle-endian On System V.4 and embedded PowerPC systems compile code for the processor in little endian mode. The @samp{-mlittle-endian} option is the same as @samp{-mlittle}. @item -mbig @itemx -mbig-endian On System V.4 and embedded PowerPC systems compile code for the processor in big endian mode. The @samp{-mbig-endian} option is the same as @samp{-mbig}. @item -mcall-sysv On System V.4 and embedded PowerPC systems compile code using calling conventions that adheres to the March 1995 draft of the System V Application Binary Interface, PowerPC processor supplement. This is the default unless you configured GCC using @samp{powerpc-*-eabiaix}. @item -mcall-sysv-eabi Specify both @samp{-mcall-sysv} and @samp{-meabi} options. @item -mcall-sysv-noeabi Specify both @samp{-mcall-sysv} and @samp{-mno-eabi} options. @item -mcall-aix On System V.4 and embedded PowerPC systems compile code using calling conventions that are similar to those used on AIX. This is the default if you configured GCC using @samp{powerpc-*-eabiaix}. @item -mcall-solaris On System V.4 and embedded PowerPC systems compile code for the Solaris operating system. @item -mcall-linux On System V.4 and embedded PowerPC systems compile code for the Linux-based GNU system. @item -mprototype @itemx -mno-prototype On System V.4 and embedded PowerPC systems assume that all calls to variable argument functions are properly prototyped. Otherwise, the compiler must insert an instruction before every non prototyped call to set or clear bit 6 of the condition code register (@var{CR}) to indicate whether floating point values were passed in the floating point registers in case the function takes a variable arguments. With @samp{-mprototype}, only calls to prototyped variable argument functions will set or clear the bit. @item -msim On embedded PowerPC systems, assume that the startup module is called @file{sim-crt0.o} and that the standard C libraries are @file{libsim.a} and @file{libc.a}. This is the default for @samp{powerpc-*-eabisim}. configurations. @item -mmvme On embedded PowerPC systems, assume that the startup module is called @file{crt0.o} and the standard C libraries are @file{libmvme.a} and @file{libc.a}. @item -mads On embedded PowerPC systems, assume that the startup module is called @file{crt0.o} and the standard C libraries are @file{libads.a} and @file{libc.a}. @item -myellowknife On embedded PowerPC systems, assume that the startup module is called @file{crt0.o} and the standard C libraries are @file{libyk.a} and @file{libc.a}. @item -memb On embedded PowerPC systems, set the @var{PPC_EMB} bit in the ELF flags header to indicate that @samp{eabi} extended relocations are used. @item -meabi @itemx -mno-eabi On System V.4 and embedded PowerPC systems do (do not) adhere to the Embedded Applications Binary Interface (eabi) which is a set of modifications to the System V.4 specifications. Selecting @code{-meabi} means that the stack is aligned to an 8 byte boundary, a function @code{__eabi} is called to from @code{main} to set up the eabi environment, and the @samp{-msdata} option can use both @code{r2} and @code{r13} to point to two separate small data areas. Selecting @code{-mno-eabi} means that the stack is aligned to a 16 byte boundary, do not call an initialization function from @code{main}, and the @samp{-msdata} option will only use @code{r13} to point to a single small data area. The @samp{-meabi} option is on by default if you configured GCC using one of the @samp{powerpc*-*-eabi*} options. @item -msdata=eabi On System V.4 and embedded PowerPC systems, put small initialized @code{const} global and static data in the @samp{.sdata2} section, which is pointed to by register @code{r2}. Put small initialized non-@code{const} global and static data in the @samp{.sdata} section, which is pointed to by register @code{r13}. Put small uninitialized global and static data in the @samp{.sbss} section, which is adjacent to the @samp{.sdata} section. The @samp{-msdata=eabi} option is incompatible with the @samp{-mrelocatable} option. The @samp{-msdata=eabi} option also sets the @samp{-memb} option. @item -msdata=sysv On System V.4 and embedded PowerPC systems, put small global and static data in the @samp{.sdata} section, which is pointed to by register @code{r13}. Put small uninitialized global and static data in the @samp{.sbss} section, which is adjacent to the @samp{.sdata} section. The @samp{-msdata=sysv} option is incompatible with the @samp{-mrelocatable} option. @item -msdata=default @itemx -msdata On System V.4 and embedded PowerPC systems, if @samp{-meabi} is used, compile code the same as @samp{-msdata=eabi}, otherwise compile code the same as @samp{-msdata=sysv}. @item -msdata-data On System V.4 and embedded PowerPC systems, put small global and static data in the @samp{.sdata} section. Put small uninitialized global and static data in the @samp{.sbss} section. Do not use register @code{r13} to address small data however. This is the default behavior unless other @samp{-msdata} options are used. @item -msdata=none @itemx -mno-sdata On embedded PowerPC systems, put all initialized global and static data in the @samp{.data} section, and all uninitialized data in the @samp{.bss} section. @item -G @var{num} @cindex smaller data references (PowerPC) @cindex .sdata/.sdata2 references (PowerPC) On embedded PowerPC systems, put global and static items less than or equal to @var{num} bytes into the small data or bss sections instead of the normal data or bss section. By default, @var{num} is 8. The @samp{-G @var{num}} switch is also passed to the linker. All modules should be compiled with the same @samp{-G @var{num}} value. @item -mregnames @itemx -mno-regnames On System V.4 and embedded PowerPC systems do (do not) emit register names in the assembly language output using symbolic forms. @end table @node RT Options @subsection IBM RT Options @cindex RT options @cindex IBM RT options These @samp{-m} options are defined for the IBM RT PC: @table @code @item -min-line-mul Use an in-line code sequence for integer multiplies. This is the default. @item -mcall-lib-mul Call @code{lmul$$} for integer multiples. @item -mfull-fp-blocks Generate full-size floating point data blocks, including the minimum amount of scratch space recommended by IBM. This is the default. @item -mminimum-fp-blocks Do not include extra scratch space in floating point data blocks. This results in smaller code, but slower execution, since scratch space must be allocated dynamically. @cindex @file{varargs.h} and RT PC @cindex @file{stdarg.h} and RT PC @item -mfp-arg-in-fpregs Use a calling sequence incompatible with the IBM calling convention in which floating point arguments are passed in floating point registers. Note that @code{varargs.h} and @code{stdargs.h} will not work with floating point operands if this option is specified. @item -mfp-arg-in-gregs Use the normal calling convention for floating point arguments. This is the default. @item -mhc-struct-return Return structures of more than one word in memory, rather than in a register. This provides compatibility with the MetaWare HighC (hc) compiler. Use the option @samp{-fpcc-struct-return} for compatibility with the Portable C Compiler (pcc). @item -mnohc-struct-return Return some structures of more than one word in registers, when convenient. This is the default. For compatibility with the IBM-supplied compilers, use the option @samp{-fpcc-struct-return} or the option @samp{-mhc-struct-return}. @end table @node MIPS Options @subsection MIPS Options @cindex MIPS options These @samp{-m} options are defined for the MIPS family of computers: @table @code @item -mcpu=@var{cpu type} Assume the defaults for the machine type @var{cpu type} when scheduling instructions. The choices for @var{cpu type} are @samp{r2000}, @samp{r3000}, @samp{r4000}, @samp{r4400}, @samp{r4600}, and @samp{r6000}. While picking a specific @var{cpu type} will schedule things appropriately for that particular chip, the compiler will not generate any code that does not meet level 1 of the MIPS ISA (instruction set architecture) without the @samp{-mips2} or @samp{-mips3} switches being used. @item -mips1 Issue instructions from level 1 of the MIPS ISA. This is the default. @samp{r3000} is the default @var{cpu type} at this ISA level. @item -mips2 Issue instructions from level 2 of the MIPS ISA (branch likely, square root instructions). @samp{r6000} is the default @var{cpu type} at this ISA level. @item -mips3 Issue instructions from level 3 of the MIPS ISA (64 bit instructions). @samp{r4000} is the default @var{cpu type} at this ISA level. This option does not change the sizes of any of the C data types. @item -mfp32 Assume that 32 32-bit floating point registers are available. This is the default. @item -mfp64 Assume that 32 64-bit floating point registers are available. This is the default when the @samp{-mips3} option is used. @item -mgp32 Assume that 32 32-bit general purpose registers are available. This is the default. @item -mgp64 Assume that 32 64-bit general purpose registers are available. This is the default when the @samp{-mips3} option is used. @item -mint64 Types long, int, and pointer are 64 bits. This works only if @samp{-mips3} is also specified. @item -mlong64 Types long and pointer are 64 bits, and type int is 32 bits. This works only if @samp{-mips3} is also specified. @item -mmips-as Generate code for the MIPS assembler, and invoke @file{mips-tfile} to add normal debug information. This is the default for all platforms except for the OSF/1 reference platform, using the OSF/rose object format. If the either of the @samp{-gstabs} or @samp{-gstabs+} switches are used, the @file{mips-tfile} program will encapsulate the stabs within MIPS ECOFF. @item -mgas Generate code for the GNU assembler. This is the default on the OSF/1 reference platform, using the OSF/rose object format. Also, this is the default if the configure option @samp{--with-gnu-as} is used. @item -msplit-addresses @itemx -mno-split-addresses Generate code to load the high and low parts of address constants separately. This allows @code{gcc} to optimize away redundant loads of the high order bits of addresses. This optimization requires GNU as and GNU ld. This optimization is enabled by default for some embedded targets where GNU as and GNU ld are standard. @item -mrnames @itemx -mno-rnames The @samp{-mrnames} switch says to output code using the MIPS software names for the registers, instead of the hardware names (ie, @var{a0} instead of @var{$4}). The only known assembler that supports this option is the Algorithmics assembler. @item -mgpopt @itemx -mno-gpopt The @samp{-mgpopt} switch says to write all of the data declarations before the instructions in the text section, this allows the MIPS assembler to generate one word memory references instead of using two words for short global or static data items. This is on by default if optimization is selected. @item -mstats @itemx -mno-stats For each non-inline function processed, the @samp{-mstats} switch causes the compiler to emit one line to the standard error file to print statistics about the program (number of registers saved, stack size, etc.). @item -mmemcpy @itemx -mno-memcpy The @samp{-mmemcpy} switch makes all block moves call the appropriate string function (@samp{memcpy} or @samp{bcopy}) instead of possibly generating inline code. @item -mmips-tfile @itemx -mno-mips-tfile The @samp{-mno-mips-tfile} switch causes the compiler not postprocess the object file with the @file{mips-tfile} program, after the MIPS assembler has generated it to add debug support. If @file{mips-tfile} is not run, then no local variables will be available to the debugger. In addition, @file{stage2} and @file{stage3} objects will have the temporary file names passed to the assembler embedded in the object file, which means the objects will not compare the same. The @samp{-mno-mips-tfile} switch should only be used when there are bugs in the @file{mips-tfile} program that prevents compilation. @item -msoft-float Generate output containing library calls for floating point. @strong{Warning:} the requisite libraries are not part of GNU CC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. @item -mhard-float Generate output containing floating point instructions. This is the default if you use the unmodified sources. @item -mabicalls @itemx -mno-abicalls Emit (or do not emit) the pseudo operations @samp{.abicalls}, @samp{.cpload}, and @samp{.cprestore} that some System V.4 ports use for position independent code. @item -mlong-calls @itemx -mno-long-calls Do all calls with the @samp{JALR} instruction, which requires loading up a function's address into a register before the call. You need to use this switch, if you call outside of the current 512 megabyte segment to functions that are not through pointers. @item -mhalf-pic @itemx -mno-half-pic Put pointers to extern references into the data section and load them up, rather than put the references in the text section. @item -membedded-pic @itemx -mno-embedded-pic Generate PIC code suitable for some embedded systems. All calls are made using PC relative address, and all data is addressed using the $gp register. This requires GNU as and GNU ld which do most of the work. @item -membedded-data @itemx -mno-embedded-data Allocate variables to the read-only data section first if possible, then next in the small data section if possible, otherwise in data. This gives slightly slower code than the default, but reduces the amount of RAM required when executing, and thus may be preferred for some embedded systems. @item -msingle-float @itemx -mdouble-float The @samp{-msingle-float} switch tells gcc to assume that the floating point coprocessor only supports single precision operations, as on the @samp{r4650} chip. The @samp{-mdouble-float} switch permits gcc to use double precision operations. This is the default. @item -mmad @itemx -mno-mad Permit use of the @samp{mad}, @samp{madu} and @samp{mul} instructions, as on the @samp{r4650} chip. @item -m4650 Turns on @samp{-msingle-float}, @samp{-mmad}, and, at least for now, @samp{-mcpu=r4650}. @item -EL Compile code for the processor in little endian mode. The requisite libraries are assumed to exist. @item -EB Compile code for the processor in big endian mode. The requisite libraries are assumed to exist. @item -G @var{num} @cindex smaller data references (MIPS) @cindex gp-relative references (MIPS) Put global and static items less than or equal to @var{num} bytes into the small data or bss sections instead of the normal data or bss section. This allows the assembler to emit one word memory reference instructions based on the global pointer (@var{gp} or @var{$28}), instead of the normal two words used. By default, @var{num} is 8 when the MIPS assembler is used, and 0 when the GNU assembler is used. The @samp{-G @var{num}} switch is also passed to the assembler and linker. All modules should be compiled with the same @samp{-G @var{num}} value. @item -nocpp Tell the MIPS assembler to not run it's preprocessor over user assembler files (with a @samp{.s} suffix) when assembling them. @end table @ifset INTERNALS These options are defined by the macro @code{TARGET_SWITCHES} in the machine description. The default for the options is also defined by that macro, which enables you to change the defaults. @end ifset @node i386 Options @subsection Intel 386 Options @cindex i386 Options @cindex Intel 386 Options These @samp{-m} options are defined for the i386 family of computers: @table @code @item -mcpu=@var{cpu type} Assume the defaults for the machine type @var{cpu type} when scheduling instructions. The choices for @var{cpu type} are: @samp{i386}, @samp{i486}, @samp{i586} (@samp{pentium}), @samp{pentium}, @samp{i686} (@samp{pentiumpro}) and @samp{pentiumpro}. While picking a specific @var{cpu type} will schedule things appropriately for that particular chip, the compiler will not generate any code that does not run on the i386 without the @samp{-march=@var{cpu type}} option being used. @item -march=@var{cpu type} Generate instructions for the machine type @var{cpu type}. The choices for @var{cpu type} are: @samp{i386}, @samp{i486}, @samp{pentium}, and @samp{pentiumpro}. Specifying @samp{-march=@var{cpu type}} implies @samp{-mcpu=@var{cpu type}}. @item -m386 @itemx -m486 @itemx -mpentium @itemx -mpentiumpro Synonyms for -mcpu=i386, -mcpu=i486, -mcpu=pentium, and -mcpu=pentiumpro respectively. @item -mieee-fp @itemx -mno-ieee-fp Control whether or not the compiler uses IEEE floating point comparisons. These handle correctly the case where the result of a comparison is unordered. @item -msoft-float Generate output containing library calls for floating point. @strong{Warning:} the requisite libraries are not part of GNU CC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. On machines where a function returns floating point results in the 80387 register stack, some floating point opcodes may be emitted even if @samp{-msoft-float} is used. @item -mno-fp-ret-in-387 Do not use the FPU registers for return values of functions. The usual calling convention has functions return values of types @code{float} and @code{double} in an FPU register, even if there is no FPU. The idea is that the operating system should emulate an FPU. The option @samp{-mno-fp-ret-in-387} causes such values to be returned in ordinary CPU registers instead. @item -mno-fancy-math-387 Some 387 emulators do not support the @code{sin}, @code{cos} and @code{sqrt} instructions for the 387. Specify this option to avoid generating those instructions. This option is the default on FreeBSD. As of revision 2.6.1, these instructions are not generated unless you also use the @samp{-ffast-math} switch. @item -malign-double @itemx -mno-align-double Control whether GNU CC aligns @code{double}, @code{long double}, and @code{long long} variables on a two word boundary or a one word boundary. Aligning @code{double} variables on a two word boundary will produce code that runs somewhat faster on a @samp{Pentium} at the expense of more memory. @strong{Warning:} if you use the @samp{-malign-double} switch, structures containing the above types will be aligned differently than the published application binary interface specifications for the 386. @item -msvr3-shlib @itemx -mno-svr3-shlib Control whether GNU CC places uninitialized locals into @code{bss} or @code{data}. @samp{-msvr3-shlib} places these locals into @code{bss}. These options are meaningful only on System V Release 3. @item -mno-wide-multiply @itemx -mwide-multiply Control whether GNU CC uses the @code{mul} and @code{imul} that produce 64 bit results in @code{eax:edx} from 32 bit operands to do @code{long long} multiplies and 32-bit division by constants. @item -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return with the @code{ret} @var{num} instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the arguments there. You can specify that an individual function is called with this calling sequence with the function attribute @samp{stdcall}. You can also override the @samp{-mrtd} option by using the function attribute @samp{cdecl}. @xref{Function Attributes} @strong{Warning:} this calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix compiler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including @code{printf}); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Normally, extra arguments are harmlessly ignored.) @item -mreg-alloc=@var{regs} Control the default allocation order of integer registers. The string @var{regs} is a series of letters specifying a register. The supported letters are: @code{a} allocate EAX; @code{b} allocate EBX; @code{c} allocate ECX; @code{d} allocate EDX; @code{S} allocate ESI; @code{D} allocate EDI; @code{B} allocate EBP. @item -mregparm=@var{num} Control how many registers are used to pass integer arguments. By default, no registers are used to pass arguments, and at most 3 registers can be used. You can control this behavior for a specific function by using the function attribute @samp{regparm}. @xref{Function Attributes} @strong{Warning:} if you use this switch, and @var{num} is nonzero, then you must build all modules with the same value, including any libraries. This includes the system libraries and startup modules. @item -malign-loops=@var{num} Align loops to a 2 raised to a @var{num} byte boundary. If @samp{-malign-loops} is not specified, the default is 2. @item -malign-jumps=@var{num} Align instructions that are only jumped to to a 2 raised to a @var{num} byte boundary. If @samp{-malign-jumps} is not specified, the default is 2 if optimizing for a 386, and 4 if optimizing for a 486. @item -malign-functions=@var{num} Align the start of functions to a 2 raised to @var{num} byte boundary. If @samp{-malign-functions} is not specified, the default is 2 if optimizing for a 386, and 4 if optimizing for a 486. @end table @node HPPA Options @subsection HPPA Options @cindex HPPA Options These @samp{-m} options are defined for the HPPA family of computers: @table @code @item -mpa-risc-1-0 Generate code for a PA 1.0 processor. @item -mpa-risc-1-1 Generate code for a PA 1.1 processor. @item -mbig-switch Generate code suitable for big switch tables. Use this option only if the assembler/linker complain about out of range branches within a switch table. @item -mjump-in-delay Fill delay slots of function calls with unconditional jump instructions by modifying the return pointer for the function call to be the target of the conditional jump. @item -mdisable-fpregs Prevent floating point registers from being used in any manner. This is necessary for compiling kernels which perform lazy context switching of floating point registers. If you use this option and attempt to perform floating point operations, the compiler will abort. @item -mdisable-indexing Prevent the compiler from using indexing address modes. This avoids some rather obscure problems when compiling MIG generated code under MACH. @item -mno-space-regs Generate code that assumes the target has no space registers. This allows GCC to generate faster indirect calls and use unscaled index address modes. Such code is suitable for level 0 PA systems and kernels. @item -mfast-indirect-calls Generate code that assumes calls never cross space boundaries. This allows GCC to emit code which performs faster indirect calls. This option will not work in the presense of shared libraries or nested functions. @item -mspace Optimize for space rather than execution time. Currently this only enables out of line function prologues and epilogues. This option is incompatible with PIC code generation and profiling. @item -mlong-load-store Generate 3-instruction load and store sequences as sometimes required by the HP-UX 10 linker. This is equivalent to the @samp{+k} option to the HP compilers. @item -mportable-runtime Use the portable calling conventions proposed by HP for ELF systems. @item -mgas Enable the use of assembler directives only GAS understands. @item -mschedule=@var{cpu type} Schedule code according to the constraints for the machine type @var{cpu type}. The choices for @var{cpu type} are @samp{700} for 7@var{n}0 machines, @samp{7100} for 7@var{n}5 machines, and @samp{7100} for 7@var{n}2 machines. @samp{7100} is the default for @var{cpu type}. Note the @samp{7100LC} scheduling information is incomplete and using @samp{7100LC} often leads to bad schedules. For now it's probably best to use @samp{7100} instead of @samp{7100LC} for the 7@var{n}2 machines. @item -mlinker-opt Enable the optimization pass in the HPUX linker. Note this makes symbolic debugging impossible. It also triggers a bug in the HPUX 8 and HPUX 9 linkers in which they give bogus error messages when linking some programs. @item -msoft-float Generate output containing library calls for floating point. @strong{Warning:} the requisite libraries are not available for all HPPA targets. Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded target @samp{hppa1.1-*-pro} does provide software floating point support. @samp{-msoft-float} changes the calling convention in the output file; therefore, it is only useful if you compile @emph{all} of a program with this option. In particular, you need to compile @file{libgcc.a}, the library that comes with GNU CC, with @samp{-msoft-float} in order for this to work. @end table @node Intel 960 Options @subsection Intel 960 Options These @samp{-m} options are defined for the Intel 960 implementations: @table @code @item -m@var{cpu type} Assume the defaults for the machine type @var{cpu type} for some of the other options, including instruction scheduling, floating point support, and addressing modes. The choices for @var{cpu type} are @samp{ka}, @samp{kb}, @samp{mc}, @samp{ca}, @samp{cf}, @samp{sa}, and @samp{sb}. The default is @samp{kb}. @item -mnumerics @itemx -msoft-float The @samp{-mnumerics} option indicates that the processor does support floating-point instructions. The @samp{-msoft-float} option indicates that floating-point support should not be assumed. @item -mleaf-procedures @itemx -mno-leaf-procedures Do (or do not) attempt to alter leaf procedures to be callable with the @code{bal} instruction as well as @code{call}. This will result in more efficient code for explicit calls when the @code{bal} instruction can be substituted by the assembler or linker, but less efficient code in other cases, such as calls via function pointers, or using a linker that doesn't support this optimization. @item -mtail-call @itemx -mno-tail-call Do (or do not) make additional attempts (beyond those of the machine-independent portions of the compiler) to optimize tail-recursive calls into branches. You may not want to do this because the detection of cases where this is not valid is not totally complete. The default is @samp{-mno-tail-call}. @item -mcomplex-addr @itemx -mno-complex-addr Assume (or do not assume) that the use of a complex addressing mode is a win on this implementation of the i960. Complex addressing modes may not be worthwhile on the K-series, but they definitely are on the C-series. The default is currently @samp{-mcomplex-addr} for all processors except the CB and CC. @item -mcode-align @itemx -mno-code-align Align code to 8-byte boundaries for faster fetching (or don't bother). Currently turned on by default for C-series implementations only. @ignore @item -mclean-linkage @itemx -mno-clean-linkage These options are not fully implemented. @end ignore @item -mic-compat @itemx -mic2.0-compat @itemx -mic3.0-compat Enable compatibility with iC960 v2.0 or v3.0. @item -masm-compat @itemx -mintel-asm Enable compatibility with the iC960 assembler. @item -mstrict-align @itemx -mno-strict-align Do not permit (do permit) unaligned accesses. @item -mold-align Enable structure-alignment compatibility with Intel's gcc release version 1.3 (based on gcc 1.37). This option implies @samp{-mstrict-align}. @end table @node DEC Alpha Options @subsection DEC Alpha Options These @samp{-m} options are defined for the DEC Alpha implementations: @table @code @item -mno-soft-float @itemx -msoft-float Use (do not use) the hardware floating-point instructions for floating-point operations. When @code{-msoft-float} is specified, functions in @file{libgcc1.c} will be used to perform floating-point operations. Unless they are replaced by routines that emulate the floating-point operations, or compiled in such a way as to call such emulations routines, these routines will issue floating-point operations. If you are compiling for an Alpha without floating-point operations, you must ensure that the library is built so as not to call them. Note that Alpha implementations without floating-point operations are required to have floating-point registers. @item -mfp-reg @itemx -mno-fp-regs Generate code that uses (does not use) the floating-point register set. @code{-mno-fp-regs} implies @code{-msoft-float}. If the floating-point register set is not used, floating point operands are passed in integer registers as if they were integers and floating-point results are passed in $0 instead of $f0. This is a non-standard calling sequence, so any function with a floating-point argument or return value called by code compiled with @code{-mno-fp-regs} must also be compiled with that option. A typical use of this option is building a kernel that does not use, and hence need not save and restore, any floating-point registers. @item -mieee The Alpha architecture implements floating-point hardware optimized for maximum performance. It is mostly compliant with the IEEE floating point standard. However, for full compliance, software assistance is required. This option generates code fully IEEE compliant code @emph{except} that the @var{inexact flag} is not maintained (see below). If this option is turned on, the CPP macro @code{_IEEE_FP} is defined during compilation. The option is a shorthand for: @samp{-D_IEEE_FP -mfp-trap-mode=su -mtrap-precision=i -mieee-conformant}. The resulting code is less efficient but is able to correctly support denormalized numbers and exceptional IEEE values such as not-a-number and plus/minus infinity. Other Alpha compilers call this option @code{-ieee_with_no_inexact}. @item -mieee-with-inexact @c overfull hbox here --bob 22 jul96 @c original text between ignore ... end ignore @ignore This is like @samp{-mieee} except the generated code also maintains the IEEE @var{inexact flag}. Turning on this option causes the generated code to implement fully-compliant IEEE math. The option is a shorthand for @samp{-D_IEEE_FP -D_IEEE_FP_INEXACT} plus @samp{-mieee-conformant}, @samp{-mfp-trap-mode=sui}, and @samp{-mtrap-precision=i}. On some Alpha implementations the resulting code may execute significantly slower than the code generated by default. Since there is very little code that depends on the @var{inexact flag}, you should normally not specify this option. Other Alpha compilers call this option @samp{-ieee_with_inexact}. @end ignore @c changed paragraph This is like @samp{-mieee} except the generated code also maintains the IEEE @var{inexact flag}. Turning on this option causes the generated code to implement fully-compliant IEEE math. The option is a shorthand for @samp{-D_IEEE_FP -D_IEEE_FP_INEXACT} plus the three following: @samp{-mieee-conformant}, @samp{-mfp-trap-mode=sui}, and @samp{-mtrap-precision=i}. On some Alpha implementations the resulting code may execute significantly slower than the code generated by default. Since there is very little code that depends on the @var{inexact flag}, you should normally not specify this option. Other Alpha compilers call this option @samp{-ieee_with_inexact}. @c end changes to prevent overfull hboxes @item -mfp-trap-mode=@var{trap mode} This option controls what floating-point related traps are enabled. Other Alpha compilers call this option @samp{-fptm }@var{trap mode}. The trap mode can be set to one of four values: @table @samp @item n This is the default (normal) setting. The only traps that are enabled are the ones that cannot be disabled in software (e.g., division by zero trap). @item u In addition to the traps enabled by @samp{n}, underflow traps are enabled as well. @item su Like @samp{su}, but the instructions are marked to be safe for software completion (see Alpha architecture manual for details). @item sui Like @samp{su}, but inexact traps are enabled as well. @end table @item -mfp-rounding-mode=@var{rounding mode} Selects the IEEE rounding mode. Other Alpha compilers call this option @samp{-fprm }@var{rounding mode}. The @var{rounding mode} can be one of: @table @samp @item n Normal IEEE rounding mode. Floating point numbers are rounded towards the nearest machine number or towards the even machine number in case of a tie. @item m Round towards minus infinity. @item c Chopped rounding mode. Floating point numbers are rounded towards zero. @item d Dynamic rounding mode. A field in the floating point control register (@var{fpcr}, see Alpha architecture reference manual) controls the rounding mode in effect. The C library initializes this register for rounding towards plus infinity. Thus, unless your program modifies the @var{fpcr}, @samp{d} corresponds to round towards plus infinity.@end table @item -mtrap-precision=@var{trap precision} In the Alpha architecture, floating point traps are imprecise. This means without software assistance it is impossible to recover from a floating trap and program execution normally needs to be terminated. GNU CC can generate code that can assist operating system trap handlers in determining the exact location that caused a floating point trap. Depending on the requirements of an application, different levels of precisions can be selected: @table @samp @item p Program precision. This option is the default and means a trap handler can only identify which program caused a floating point exception. @item f Function precision. The trap handler can determine the function that caused a floating point exception. @item i Instruction precision. The trap handler can determine the exact instruction that caused a floating point exception. @end table Other Alpha compilers provide the equivalent options called @samp{-scope_safe} and @samp{-resumption_safe}. @item -mieee-conformant This option marks the generated code as IEEE conformant. You must not use this option unless you also specify @samp{-mtrap-precision=i} and either @samp{-mfp-trap-mode=su} or @samp{-mfp-trap-mode=sui}. Its only effect is to emit the line @samp{.eflag 48} in the function prologue of the generated assembly file. Under DEC Unix, this has the effect that IEEE-conformant math library routines will be linked in. @item -mbuild-constants Normally GNU CC examines a 32- or 64-bit integer constant to see if it can construct it from smaller constants in two or three instructions. If it cannot, it will output the constant as a literal and generate code to load it from the data segment at runtime. Use this option to require GNU CC to construct @emph{all} integer constants using code, even if it takes more instructions (the maximum is six). You would typically use this option to build a shared library dynamic loader. Itself a shared library, it must relocate itself in memory before it can find the variables and constants in its own data segment. @item -malpha-as @itemx -mgas Select whether to generate code to be assembled by the vendor-supplied assembler (@samp{-malpha-as}) or by the GNU assembler @samp{-mgas}. @item -mbwx @itemx -mno-bwx @itemx -mcix @itemx -mno-cix @itemx -mmax @itemx -mno-max Indicate whether GNU CC should generate code to use the optional BWX, CIX, and MAX instruction sets. The default is to use the instruction sets supported by the CPU type specified via @samp{-mcpu=} option or that of the CPU on which GNU CC was built if none was specified. @item -mcpu=@var{cpu_type} Set the instruction set, register set, and instruction scheduling parameters for machine type @var{cpu_type}. You can specify either the @samp{EV} style name or the corresponding chip number. GNU CC supports scheduling parameters for the EV4 and EV5 family of processors and will choose the default values for the instruction set from the processor you specify. If you do not specify a processor type, GNU CC will default to the processor on which the compiler was built. Supported values for @var{cpu_type} are @table @samp @item ev4 @itemx 21064 Schedules as an EV4 and has no instruction set extensions. @item ev5 @itemx 21164 Schedules as an EV5 and has no instruction set extensions. @item ev56 @itemx 21164a Schedules as an EV5 and supports the BWX extension. @item pca56 @itemx 21164PC Schedules as an EV5 and supports the BWX and MAX extensions. @item ev6 @itemx 21264 Schedules as an EV5 (until Digital releases the scheduling parameters for the EV6) and supports the BWX, CIX, and MAX extensions. @end table @end table @node Clipper Options @subsection Clipper Options These @samp{-m} options are defined for the Clipper implementations: @table @code @item -mc300 Produce code for a C300 Clipper processor. This is the default. @itemx -mc400 Produce code for a C400 Clipper processor i.e. use floating point registers f8..f15. @end table @node H8/300 Options @subsection H8/300 Options These @samp{-m} options are defined for the H8/300 implementations: @table @code @item -mrelax Shorten some address references at link time, when possible; uses the linker option @samp{-relax}. @xref{H8/300,, @code{ld} and the H8/300, ld.info, Using ld}, for a fuller description. @item -mh Generate code for the H8/300H. @item -ms Generate code for the H8/S. @item -mint32 Make @code{int} data 32 bits by default. @item -malign-300 On the h8/300h, use the same alignment rules as for the h8/300. The default for the h8/300h is to align longs and floats on 4 byte boundaries. @samp{-malign-300} causes them to be aligned on 2 byte boundaries. This option has no effect on the h8/300. @end table @node SH Options @subsection SH Options These @samp{-m} options are defined for the SH implementations: @table @code @item -m1 Generate code for the SH1. @item -m2 Generate code for the SH2. @item -m3 Generate code for the SH3. @item -m3e Generate code for the SH3e. @item -mb Compile code for the processor in big endian mode. @item -ml Compile code for the processor in little endian mode. @item -mrelax Shorten some address references at link time, when possible; uses the linker option @samp{-relax}. @end table @node System V Options @subsection Options for System V These additional options are available on System V Release 4 for compatibility with other compilers on those systems: @table @code @item -G Create a shared object. It is recommended that @samp{-symbolic} or @samp{-shared} be used instead. @item -Qy Identify the versions of each tool used by the compiler, in a @code{.ident} assembler directive in the output. @item -Qn Refrain from adding @code{.ident} directives to the output file (this is the default). @item -YP,@var{dirs} Search the directories @var{dirs}, and no others, for libraries specified with @samp{-l}. @item -Ym,@var{dir} Look in the directory @var{dir} to find the M4 preprocessor. The assembler uses this option. @c This is supposed to go with a -Yd for predefined M4 macro files, but @c the generic assembler that comes with Solaris takes just -Ym. @end table @node V850 Options @subsection V850 Options @cindex V850 Options These @samp{-m} options are defined for V850 implementations: @table @code @item -mlong-calls @itemx -mno-long-calls Treat all calls as being far away (near). If calls are assumed to be far away, the compiler will always load the functions address up into a register, and call indirect through the pointer. @item -mno-ep @item -mep Do not optimize (do optimize) basic blocks that use the same index pointer 4 or more times to copy pointer into the @code{ep} register, and use the shorter @code{sld} and @code{sst} instructions. The @samp{-mep} option is on by default if you optimize. @item -mno-prolog-function @itemx -mprolog-function Do not use (do use) external functions to save and restore registers at the prolog and epilog of a function. The external functions are slower, but use less code space if more than one function saves the same number of registers. The @samp{-mprolog-function} option is on by default if you optimize. @item -mspace Try to make the code as small as possible. At present, this just turns on the @samp{-mep} and @samp{-mprolog-function} options. @item -mtda=@var{n} Put static or global variables whose size is @var{n} bytes or less into the tiny data area that register @code{ep} points to. The tiny data area can hold up to 256 bytes in total (128 bytes for byte references). @item -msda=@var{n} Put static or global variables whose size is @var{n} bytes or less into the small data area that register @code{gp} points to. The small data area can hold up to 64 kilobytes. @item -mzda=@var{n} Put static or global variables whose size is @var{n} bytes or less into the first 32 kilobytes of memory. @item -mv850 Specify that the target processor is the V850. @item -mbig-switch Generate code suitable for big switch tables. Use this option only if the assembler/linker complain about out of range branches within a switch table. @end table @node Code Gen Options @section Options for Code Generation Conventions @cindex code generation conventions @cindex options, code generation @cindex run-time options These machine-independent options control the interface conventions used in code generation. Most of them have both positive and negative forms; the negative form of @samp{-ffoo} would be @samp{-fno-foo}. In the table below, only one of the forms is listed---the one which is not the default. You can figure out the other form by either removing @samp{no-} or adding it. @table @code @item -fexceptions Enable exception handling, and generate extra code needed to propagate exceptions. If you do not specify this option, GNU CC enables it by default for languages like C++ that normally require exception handling, and disabled for languages like C that do not normally require it. However, when compiling C code that needs to interoperate properly with exception handlers written in C++, you may need to enable this option. You may also wish to disable this option is you are compiling older C++ programs that don't use exception handling. @item -fpcc-struct-return Return ``short'' @code{struct} and @code{union} values in memory like longer ones, rather than in registers. This convention is less efficient, but it has the advantage of allowing intercallability between GNU CC-compiled files and files compiled with other compilers. The precise convention for returning structures in memory depends on the target configuration macros. Short structures and unions are those whose size and alignment match that of some integer type. @item -freg-struct-return Use the convention that @code{struct} and @code{union} values are returned in registers when possible. This is more efficient for small structures than @samp{-fpcc-struct-return}. If you specify neither @samp{-fpcc-struct-return} nor its contrary @samp{-freg-struct-return}, GNU CC defaults to whichever convention is standard for the target. If there is no standard convention, GNU CC defaults to @samp{-fpcc-struct-return}, except on targets where GNU CC is the principal compiler. In those cases, we can choose the standard, and we chose the more efficient register return alternative. @item -fshort-enums Allocate to an @code{enum} type only as many bytes as it needs for the declared range of possible values. Specifically, the @code{enum} type will be equivalent to the smallest integer type which has enough room. @item -fshort-double Use the same size for @code{double} as for @code{float}. @item -fshared-data Requests that the data and non-@code{const} variables of this compilation be shared data rather than private data. The distinction makes sense only on certain operating systems, where shared data is shared between processes running the same program, while private data exists in one copy per process. @item -fno-common Allocate even uninitialized global variables in the bss section of the object file, rather than generating them as common blocks. This has the effect that if the same variable is declared (without @code{extern}) in two different compilations, you will get an error when you link them. The only reason this might be useful is if you wish to verify that the program will work on other systems which always work this way. @item -fno-ident Ignore the @samp{#ident} directive. @item -fno-gnu-linker Do not output global initializations (such as C++ constructors and destructors) in the form used by the GNU linker (on systems where the GNU linker is the standard method of handling them). Use this option when you want to use a non-GNU linker, which also requires using the @code{collect2} program to make sure the system linker includes constructors and destructors. (@code{collect2} is included in the GNU CC distribution.) For systems which @emph{must} use @code{collect2}, the compiler driver @code{gcc} is configured to do this automatically. @item -finhibit-size-directive Don't output a @code{.size} assembler directive, or anything else that would cause trouble if the function is split in the middle, and the two halves are placed at locations far apart in memory. This option is used when compiling @file{crtstuff.c}; you should not need to use it for anything else. @item -fverbose-asm Put extra commentary information in the generated assembly code to make it more readable. This option is generally only of use to those who actually need to read the generated assembly code (perhaps while debugging the compiler itself). @samp{-fno-verbose-asm}, the default, causes the extra information to be omitted and is useful when comparing two assembler files. @item -fvolatile Consider all memory references through pointers to be volatile. @item -fvolatile-global Consider all memory references to extern and global data items to be volatile. @item -fpic @cindex global offset table @cindex PIC Generate position-independent code (PIC) suitable for use in a shared library, if supported for the target machine. Such code accesses all constant addresses through a global offset table (GOT). The dynamic loader resolves the GOT entries when the program starts (the dynamic loader is not part of GNU CC; it is part of the operating system). If the GOT size for the linked executable exceeds a machine-specific maximum size, you get an error message from the linker indicating that @samp{-fpic} does not work; in that case, recompile with @samp{-fPIC} instead. (These maximums are 16k on the m88k, 8k on the Sparc, and 32k on the m68k and RS/6000. The 386 has no such limit.) Position-independent code requires special support, and therefore works only on certain machines. For the 386, GNU CC supports PIC for System V but not for the Sun 386i. Code generated for the IBM RS/6000 is always position-independent. @item -fPIC If supported for the target machine, emit position-independent code, suitable for dynamic linking and avoiding any limit on the size of the global offset table. This option makes a difference on the m68k, m88k, and the Sparc. Position-independent code requires special support, and therefore works only on certain machines. @item -ffixed-@var{reg} Treat the register named @var{reg} as a fixed register; generated code should never refer to it (except perhaps as a stack pointer, frame pointer or in some other fixed role). @var{reg} must be the name of a register. The register names accepted are machine-specific and are defined in the @code{REGISTER_NAMES} macro in the machine description macro file. This flag does not have a negative form, because it specifies a three-way choice. @item -fcall-used-@var{reg} Treat the register named @var{reg} as an allocable register that is clobbered by function calls. It may be allocated for temporaries or variables that do not live across a call. Functions compiled this way will not save and restore the register @var{reg}. Use of this flag for a register that has a fixed pervasive role in the machine's execution model, such as the stack pointer or frame pointer, will produce disastrous results. This flag does not have a negative form, because it specifies a three-way choice. @item -fcall-saved-@var{reg} Treat the register named @var{reg} as an allocable register saved by functions. It may be allocated even for temporaries or variables that live across a call. Functions compiled this way will save and restore the register @var{reg} if they use it. Use of this flag for a register that has a fixed pervasive role in the machine's execution model, such as the stack pointer or frame pointer, will produce disastrous results. A different sort of disaster will result from the use of this flag for a register in which function values may be returned. This flag does not have a negative form, because it specifies a three-way choice. @item -fpack-struct Pack all structure members together without holes. Usually you would not want to use this option, since it makes the code suboptimal, and the offsets of structure members won't agree with system libraries. @item -fcheck-memory-usage Generate extra code to check each memory access. GNU CC will generate code that is suitable for a detector of bad memory accesses such as @file{Checker}. If you specify this option, you can not use the @code{asm} or @code{__asm__} keywords. You must also specify this option when you compile functions you call that have side effects. If you do not, you may get erroneous messages from the detector. Normally, you should compile all your code with this option. If you use functions from a library that have side-effects (such as @code{read}), you may not be able to recompile the library and specify this option. In that case, you can enable the @samp{-fprefix-function-name} option, which requests GNU CC to encapsulate your code and make other functions look as if they were compiled with @samp{-fcheck-memory-usage}. This is done by calling ``stubs'', which are provided by the detector. If you cannot find or build stubs for every function you call, you may have to specify @samp{-fcheck-memory-usage} without @samp{-fprefix-function-name}. @item -fprefix-function-name Request GNU CC to add a prefix to the symbols generated for function names. GNU CC adds a prefix to the names of functions defined as well as functions called. Code compiled with this option and code compiled without the option can't be linked together, unless or stubs are used. If you compile the following code with @samp{-fprefix-function-name} @example extern void bar (int); void foo (int a) @{ return bar (a + 5); @} @end example @noindent GNU CC will compile the code as if it was written: @example extern void prefix_bar (int); void prefix_foo (int a) @{ return prefix_bar (a + 5); @} @end example This option is designed to be used with @samp{-fcheck-memory-usage}. @item -fstack-check Generate code to verify that you do not go beyond the boundary of the stack. You should specify this flag if you are running in an environment with multiple threads, but only rarely need to specify it in a single-threaded environment since stack overflow is automatically detected on nearly all systems if there is only one stack. @item +e0 @itemx +e1 Control whether virtual function definitions in classes are used to generate code, or only to define interfaces for their callers. (C++ only). These options are provided for compatibility with @code{cfront} 1.x usage; the recommended alternative GNU C++ usage is in flux. @xref{C++ Interface,,Declarations and Definitions in One Header}. With @samp{+e0}, virtual function definitions in classes are declared @code{extern}; the declaration is used only as an interface specification, not to generate code for the virtual functions (in this compilation). With @samp{+e1}, G++ actually generates the code implementing virtual functions defined in the code, and makes them publicly visible. @end table @node Environment Variables @section Environment Variables Affecting GNU CC @cindex environment variables This section describes several environment variables that affect how GNU CC operates. They work by specifying directories or prefixes to use when searching for various kinds of files. @ifclear INTERNALS Note that you can also specify places to search using options such as @samp{-B}, @samp{-I} and @samp{-L} (@pxref{Directory Options}). These take precedence over places specified using environment variables, which in turn take precedence over those specified by the configuration of GNU CC. @end ifclear @ifset INTERNALS Note that you can also specify places to search using options such as @samp{-B}, @samp{-I} and @samp{-L} (@pxref{Directory Options}). These take precedence over places specified using environment variables, which in turn take precedence over those specified by the configuration of GNU CC. @xref{Driver}. @end ifset @table @code @item TMPDIR @findex TMPDIR If @code{TMPDIR} is set, it specifies the directory to use for temporary files. GNU CC uses temporary files to hold the output of one stage of compilation which is to be used as input to the next stage: for example, the output of the preprocessor, which is the input to the compiler proper. @item GCC_EXEC_PREFIX @findex GCC_EXEC_PREFIX If @code{GCC_EXEC_PREFIX} is set, it specifies a prefix to use in the names of the subprograms executed by the compiler. No slash is added when this prefix is combined with the name of a subprogram, but you can specify a prefix that ends with a slash if you wish. If GNU CC cannot find the subprogram using the specified prefix, it tries looking in the usual places for the subprogram. The default value of @code{GCC_EXEC_PREFIX} is @file{@var{prefix}/lib/gcc-lib/} where @var{prefix} is the value of @code{prefix} when you ran the @file{configure} script. Other prefixes specified with @samp{-B} take precedence over this prefix. This prefix is also used for finding files such as @file{crt0.o} that are used for linking. In addition, the prefix is used in an unusual way in finding the directories to search for header files. For each of the standard directories whose name normally begins with @samp{/usr/local/lib/gcc-lib} (more precisely, with the value of @code{GCC_INCLUDE_DIR}), GNU CC tries replacing that beginning with the specified prefix to produce an alternate directory name. Thus, with @samp{-Bfoo/}, GNU CC will search @file{foo/bar} where it would normally search @file{/usr/local/lib/bar}. These alternate directories are searched first; the standard directories come next. @item COMPILER_PATH @findex COMPILER_PATH The value of @code{COMPILER_PATH} is a colon-separated list of directories, much like @code{PATH}. GNU CC tries the directories thus specified when searching for subprograms, if it can't find the subprograms using @code{GCC_EXEC_PREFIX}. @item LIBRARY_PATH @findex LIBRARY_PATH The value of @code{LIBRARY_PATH} is a colon-separated list of directories, much like @code{PATH}. When configured as a native compiler, GNU CC tries the directories thus specified when searching for special linker files, if it can't find them using @code{GCC_EXEC_PREFIX}. Linking using GNU CC also uses these directories when searching for ordinary libraries for the @samp{-l} option (but directories specified with @samp{-L} come first). @item C_INCLUDE_PATH @itemx CPLUS_INCLUDE_PATH @itemx OBJC_INCLUDE_PATH @findex C_INCLUDE_PATH @findex CPLUS_INCLUDE_PATH @findex OBJC_INCLUDE_PATH @c @itemx OBJCPLUS_INCLUDE_PATH These environment variables pertain to particular languages. Each variable's value is a colon-separated list of directories, much like @code{PATH}. When GNU CC searches for header files, it tries the directories listed in the variable for the language you are using, after the directories specified with @samp{-I} but before the standard header file directories. @item DEPENDENCIES_OUTPUT @findex DEPENDENCIES_OUTPUT @cindex dependencies for make as output If this variable is set, its value specifies how to output dependencies for Make based on the header files processed by the compiler. This output looks much like the output from the @samp{-M} option (@pxref{Preprocessor Options}), but it goes to a separate file, and is in addition to the usual results of compilation. The value of @code{DEPENDENCIES_OUTPUT} can be just a file name, in which case the Make rules are written to that file, guessing the target name from the source file name. Or the value can have the form @samp{@var{file} @var{target}}, in which case the rules are written to file @var{file} using @var{target} as the target name. @end table @node Running Protoize @section Running Protoize The program @code{protoize} is an optional part of GNU C. You can use it to add prototypes to a program, thus converting the program to ANSI C in one respect. The companion program @code{unprotoize} does the reverse: it removes argument types from any prototypes that are found. When you run these programs, you must specify a set of source files as command line arguments. The conversion programs start out by compiling these files to see what functions they define. The information gathered about a file @var{foo} is saved in a file named @file{@var{foo}.X}. After scanning comes actual conversion. The specified files are all eligible to be converted; any files they include (whether sources or just headers) are eligible as well. But not all the eligible files are converted. By default, @code{protoize} and @code{unprotoize} convert only source and header files in the current directory. You can specify additional directories whose files should be converted with the @samp{-d @var{directory}} option. You can also specify particular files to exclude with the @samp{-x @var{file}} option. A file is converted if it is eligible, its directory name matches one of the specified directory names, and its name within the directory has not been excluded. Basic conversion with @code{protoize} consists of rewriting most function definitions and function declarations to specify the types of the arguments. The only ones not rewritten are those for varargs functions. @code{protoize} optionally inserts prototype declarations at the beginning of the source file, to make them available for any calls that precede the function's definition. Or it can insert prototype declarations with block scope in the blocks where undeclared functions are called. Basic conversion with @code{unprotoize} consists of rewriting most function declarations to remove any argument types, and rewriting function definitions to the old-style pre-ANSI form. Both conversion programs print a warning for any function declaration or definition that they can't convert. You can suppress these warnings with @samp{-q}. The output from @code{protoize} or @code{unprotoize} replaces the original source file. The original file is renamed to a name ending with @samp{.save}. If the @samp{.save} file already exists, then the source file is simply discarded. @code{protoize} and @code{unprotoize} both depend on GNU CC itself to scan the program and collect information about the functions it uses. So neither of these programs will work until GNU CC is installed. Here is a table of the options you can use with @code{protoize} and @code{unprotoize}. Each option works with both programs unless otherwise stated. @table @code @item -B @var{directory} Look for the file @file{SYSCALLS.c.X} in @var{directory}, instead of the usual directory (normally @file{/usr/local/lib}). This file contains prototype information about standard system functions. This option applies only to @code{protoize}. @item -c @var{compilation-options} Use @var{compilation-options} as the options when running @code{gcc} to produce the @samp{.X} files. The special option @samp{-aux-info} is always passed in addition, to tell @code{gcc} to write a @samp{.X} file. Note that the compilation options must be given as a single argument to @code{protoize} or @code{unprotoize}. If you want to specify several @code{gcc} options, you must quote the entire set of compilation options to make them a single word in the shell. There are certain @code{gcc} arguments that you cannot use, because they would produce the wrong kind of output. These include @samp{-g}, @samp{-O}, @samp{-c}, @samp{-S}, and @samp{-o} If you include these in the @var{compilation-options}, they are ignored. @item -C Rename files to end in @samp{.C} instead of @samp{.c}. This is convenient if you are converting a C program to C++. This option applies only to @code{protoize}. @item -g Add explicit global declarations. This means inserting explicit declarations at the beginning of each source file for each function that is called in the file and was not declared. These declarations precede the first function definition that contains a call to an undeclared function. This option applies only to @code{protoize}. @item -i @var{string} Indent old-style parameter declarations with the string @var{string}. This option applies only to @code{protoize}. @code{unprotoize} converts prototyped function definitions to old-style function definitions, where the arguments are declared between the argument list and the initial @samp{@{}. By default, @code{unprotoize} uses five spaces as the indentation. If you want to indent with just one space instead, use @samp{-i " "}. @item -k Keep the @samp{.X} files. Normally, they are deleted after conversion is finished. @item -l Add explicit local declarations. @code{protoize} with @samp{-l} inserts a prototype declaration for each function in each block which calls the function without any declaration. This option applies only to @code{protoize}. @item -n Make no real changes. This mode just prints information about the conversions that would have been done without @samp{-n}. @item -N Make no @samp{.save} files. The original files are simply deleted. Use this option with caution. @item -p @var{program} Use the program @var{program} as the compiler. Normally, the name @file{gcc} is used. @item -q Work quietly. Most warnings are suppressed. @item -v Print the version number, just like @samp{-v} for @code{gcc}. @end table If you need special compiler options to compile one of your program's source files, then you should generate that file's @samp{.X} file specially, by running @code{gcc} on that source file with the appropriate options and the option @samp{-aux-info}. Then run @code{protoize} on the entire set of files. @code{protoize} will use the existing @samp{.X} file because it is newer than the source file. For example: @example gcc -Dfoo=bar file1.c -aux-info protoize *.c @end example @noindent You need to include the special files along with the rest in the @code{protoize} command, even though their @samp{.X} files already exist, because otherwise they won't get converted. @xref{Protoize Caveats}, for more information on how to use @code{protoize} successfully.