/* * $LynxId: userdefs.h,v 1.246 2009/05/28 21:37:22 tom Exp $ * * Lynx - Hypertext navigation system * * (c) Copyright 1992, 1993, 1994 University of Kansas * 1995, 1996: GNU General Public License * * Copyrights 1996-2007 Lynx Developers Group * Note: GNU General Public License is not a copyright. */ /******************************************************************* * There are four sections to this document: * Section 1. Things you MUST verify. Unix platforms use a configure * script to provide sensible default values. If your site * has special requirements, that may not be sufficient. * For non-Unix platforms (e.g., VMS), there is no * configure script, so the defaults here are more * critical. * Section 1a) VMS specific things * Section 1b) non-VMS specific things * Section 1c) ALL Platforms * * Section 2. Things you should probably check! * * Section 3. Things you should only change after you have a good * understanding of the program! * * Section 4. Things you MUST check only if you plan to use Lynx in * an anonymous account (allow public access to Lynx)! * */ #ifndef USERDEFS_H #define USERDEFS_H /******************************************************************* * Insure definition of NOT_ASCII, etc. precedes use below. */ #ifndef HTUTILS_H #include #endif #ifdef HAVE_CONFIG_H #include #endif /******************************************************************* * Things you must change * Section 1. */ /******************************************************************* * Things you must change - VMS specific * Section 1a). */ #ifdef VMS /************************** * TEMP_SPACE is where Lynx temporary cache files will be placed. * Temporary files are removed automatically as long as nothing * goes terribly wrong :) If you include "$USER" in the definition * (e.g., "device:[dir.$USER]"), Lynx will replace the "$USER" with * the username of the account which invoked the Lynx image. Such * directories should already exist, and have protections/ACLs set * so that only the appropriate user(s) will have read/write access. * On VMS, "sys$scratch:" defaults to "sys$login:" if it has not been * defined externally, or you can use "sys$login:" explicitly here. * If the path has SHELL syntax and includes a tilde (e.g, "~/lynxtmp"), * Lynx will replace the tilde with the full path for the user's home * and convert the result to VMS syntax. * The definition here can be overridden at run time by defining a * "LYNX_TEMP_SPACE" VMS logical. */ #define TEMP_SPACE "sys$scratch:" /************************** * LYNX_CFG_FILE is the location and name of the default lynx * global configuration file. It is sought and processed at * startup of Lynx, followed by a seek and processing of a * personal RC file (.lynxrc in the user's HOME directory, * created if the user saves values in the 'o'ptions menu). * You also can define the location and name of the global * configuration file via a VMS logical, "LYNX_CFG", which * will override the "LYNX_CFG_FILE" definition here. SYS$LOGIN: * can be used as the device in either or both definitions if * you want lynx.cfg treated as a personal configuration file. * You also can use Unix syntax with a '~' for a subdirectory * of the login directory, (e.g., ~/lynx/lynx.cfg). * The -cfg command line switch will override these definitions. * You can pass the compilation default via build.com or descrip.mms. * * Note that some implementations of telnet allow passing of * environment variables, which might be used by unscrupulous * people to modify the environment in anonymous accounts. When * making Lynx and Web access publicly available via anonymous * accounts intended to run Lynx captively, be sure the wrapper * uses the -cfg switch and specifies the startfile, rather than * relying on the LYNX_CFG, LYNX_CFG_FILE, or WWW_HOME variables. * * Note that any SUFFIX or VIEWER mappings in the configuration * file will be overridden by any suffix or viewer mappings * that are established as defaults in src/HTInit.c. You can * override the src/HTInit.c defaults via the mime.types and * mailcap files (see the examples in the samples directory). */ #ifndef LYNX_CFG_FILE #define LYNX_CFG_FILE "Lynx_Dir:lynx.cfg" #endif /* LYNX_CFG_FILE */ /************************** * The EXTENSION_MAP file allows you to map file suffixes to * mime types. * The file locations defined here can be overridden in lynx.cfg. * Mappings in these global and personal files override any SUFFIX * definitions in lynx.cfg and built-in defaults from src/HTInit.c. */ #define GLOBAL_EXTENSION_MAP "Lynx_Dir:mime.types" #define PERSONAL_EXTENSION_MAP "mime.types" /************************** * The MAILCAP file allows you to map file MIME types to * external viewers. * The file locations defined here can be overridden in lynx.cfg. * Mappings in these global and personal files override any VIEWER * definitions in lynx.cfg and built-in defaults from src/HTInit.c. */ #define GLOBAL_MAILCAP "Lynx_Dir:mailcap" #define PERSONAL_MAILCAP ".mailcap" /************************** * XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c * for viewing image content types when the DECW$DISPLAY logical * is set. Make it the foreign command for your system's X image * viewer (commonly, "xv"). It can be anything that will handle GIF, * TIFF and other popular image formats. Freeware ports of xv for * VMS are available in the ftp://ftp.wku.edu/vms/unsupported and * http://www.openvms.digital.com/cd/XV310A/ subdirectories. You * must also have a "%s" for the filename. The default defined * here can be overridden in lynx.cfg, or via the global or personal * mailcap files. * Make this NULL if you don't have such a viewer or don't want to * use any default viewers for image types. */ #define XLOADIMAGE_COMMAND "xv %s" /************************** * SYSTEM_MAIL must be defined here to your mail sending command, * and SYSTEM_MAIL_FLAGS to appropriate qualifiers. They can be * changed in lynx.cfg. * * The mail command will be spawned as a subprocess of lynx * and used to send the email, with headers specified in a * temporary file for PMDF. If you define SYSTEM_MAIL to the * "generic" MAIL utility for VMS, headers cannot be specified * via a header file (and thus may not be included), and the * subject line will be specified by use of the /subject="SUBJECT" * qualifier. * * If your mailer uses another syntax, some hacking of the * mailform(), mailmsg() and reply_by_mail() functions in * LYMail.c, and printfile() function in LYPrint.c, may be * required. */ #define SYSTEM_MAIL "PMDF SEND" #define SYSTEM_MAIL_FLAGS "/headers" /* #define SYSTEM_MAIL "MAIL" */ /* #define SYSTEM_MAIL_FLAGS "" */ /************************* * Below is the argument for an sprintf command that will add * "IN%""ADDRESS""" to the Internet mail address given by the user. * It is structured for PMDF's IN%"INTERNET_ADDRESS" scheme. The %s * is replaced with the address given by the user. If you are using * a different Internet mail transport, change the IN appropriately * (e.g., to SMTP, MX, or WINS), here or in lynx.cfg. */ #define MAIL_ADRS "\"IN%%\"\"%s\"\"\"" /********************************* * On VMS, CSwing (an XTree emulation for VTxxx terminals) is intended for * use as the Directory/File Manager (sources, objects, or executables are * available from ftp://narnia.memst.edu/). CSWING_PATH should be defined * here or in lynx.cfg to your foreign command for CSwing, with any * regulatory switches you want included. If not defined, or defined as * a zero-length string ("") or "none" (case-insensitive), the support * will be disabled. It will also be disabled if the -nobrowse or * -selective switches are used, or if the file_url restriction is set. * * When enabled, the DIRED_MENU command (normally 'f' or 'F') will invoke * CSwing, normally with the current default directory as an argument to * position the user on that node of the directory tree. However, if the * current document is a local directory listing, or a local file and not * one of the temporary menu or list files, the associated directory will * be passed as an argument, to position the user on that node of the tree. */ /* #define CSWING_PATH "swing" */ /********************************* * If USE_FIXED_RECORDS is set to TRUE here and/or in lynx.cfg, Lynx will * convert 'd'ownloaded binary files to FIXED 512 record format before saving * them to disk or acting on a DOWNLOADER option. If set to FALSE, the * headers of such files will indicate that they are Stream_LF with Implied * Carriage Control, which is incorrect, and can cause downloading software * to get confused and unhappy. If you do set it FALSE, you can use the * FIXED512.COM command file, which is included in this distribution, to do * the conversion externally. */ #define USE_FIXED_RECORDS TRUE /* convert binaries to FIXED 512 */ /******************************** * If NO_ANONYMOUS_EMAIL is defined, Lynx will not offer to insert X-From * and X_Personal_Name lines in the body of email messages. On VMS, the * actual From and Personal Name (if defined for the account) headers always * are those of the account running the Lynx image. If the account is not * the one to which the recipient should reply, you can indicate the alternate * address and personal name via the X-From and X_Personal_Name entries, but * the recipient must explicitly send the reply to the X_From address, rather * than using the VMS REPLY command (which will use the actual From address). * * This symbol constant might be defined on Unix for security reasons that * don't apply on VMS. There is no security reason for defining this on VMS, * but if you have no anonymous accounts (i.e., the From always will point to * the actual user's email address, you can define it to avoid the bother of * X-From and X_Personal_Name offers. */ /*#define NO_ANONYMOUS_EMAIL TRUE */ /************************** * LYNX_LSS_FILE is the location and name of the default lynx * character style sheet file. It is sought and processed at * startup of Lynx only if experimental character style code has * been compiled in, otherwise it will be ignored. Note that use * of the character style option is _experimental_ AND _unsupported_. * There is no documentation other than a sample lynx.lss file in * the samples subdirectory. This code probably won't even work on * VMS. You can define the location and name of this file via an * environment variable, "lynx_lss", which will override the definition * here. You can use '~' to refer to the user's home directory. The * -lss command line switch will override these definitions. */ #ifndef LYNX_LSS_FILE #define LYNX_LSS_FILE "Lynx_Dir:lynx.lss" #endif /* LYNX_LSS_FILE */ /******************************************************************* * Things you must change - non-VMS specific * Section 1b). */ #else /* non-VMS: UNIX etc. */ /************************** * NOTE: This variable is set by the configure script; editing changes will * be ignored. * * LYNX_CFG_FILE is the location and name of the default lynx * global configuration file. It is sought and processed at * startup of Lynx, followed by a seek and processing of a * personal RC file (.lynxrc in the user's HOME directory, * created if the user saves values in the 'o'ptions menu). * You also can define the location and name of the global * configuration file via an environment variable, "LYNX_CFG", * which will override the "LYNX_CFG_FILE" definition here. * You can use '~' in either or both definitions if you want * lynx.cfg treated as a personal configuration file. The * -cfg command line switch will override these definitions. * You can pass the compilation default via the Makefile. * * If you are building Lynx using the configure script, you should specify * the default location of the configuration file via that script, since it * also generates the makefile and install-cfg rules. * * Note that many implementations of telnetd allow passing of * environment variables, which might be used by unscrupulous * people to modify the environment in anonymous accounts. When * making Lynx and Web access publicly available via anonymous * accounts intended to run Lynx captively, be sure the wrapper * uses the -cfg switch and specifies the startfile, rather than * relying on the LYNX_CFG, LYNX_CFG_FILE, or WWW_HOME variables. * * Note that any SUFFIX or VIEWER mappings in the configuration * file will be overridden by any suffix or viewer mappings * that are established as defaults in src/HTInit.c. You can * override the src/HTInit.c defaults via the mime.types and * mailcap files (see the examples in the samples directory). */ #ifndef HAVE_CONFIG_H #ifndef LYNX_CFG_FILE #ifdef DOSPATH #define LYNX_CFG_FILE "./lynx.cfg" #else #define LYNX_CFG_FILE "/usr/local/lib/lynx.cfg" #endif /* DOSPATH */ #endif /* LYNX_CFG_FILE */ #endif /* HAVE_CONFIG_H */ #ifndef MIME_LIBDIR #define MIME_LIBDIR "/etc/" #endif /************************** * The EXTENSION_MAP file allows you to map file suffixes to * mime types. * The file locations defined here can be overridden in lynx.cfg. * Mappings in these global and personal files override any SUFFIX * definitions in lynx.cfg and built-in defaults from src/HTInit.c. */ #define GLOBAL_EXTENSION_MAP MIME_LIBDIR "mime.types" #define PERSONAL_EXTENSION_MAP "~/.mime.types" /************************** * The MAILCAP file allows you to map file MIME types to * external viewers. * The file locations defined here can be overridden in lynx.cfg. * Mappings in these global and personal files override any VIEWER * definitions in lynx.cfg and built-in defaults from src/HTInit.c. */ #define GLOBAL_MAILCAP MIME_LIBDIR "mailcap" #define PERSONAL_MAILCAP "~/.mailcap" /************************** * XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c for * viewing image content types when the DISPLAY environment variable * is set. Make it the full path and name of the xli (also known as * xloadimage or xview) command, or other image viewer. It can be * anything that will handle GIF, TIFF and other popular image formats * (xli does). The freeware distribution of xli is available in the * ftp://ftp.x.org/contrib/ subdirectory. The shareware, xv, also is * suitable. You must also have a "%s" for the filename; "&" for * background is optional. The default defined here can be overridden * in lynx.cfg, or via the global or personal mailcap files. * Make this NULL if you don't have such a viewer or don't want to * use any default viewers for image types. Note that open is used as * the default for NeXT, instead of the XLOADIMAGE_COMMAND definition. */ #define XLOADIMAGE_COMMAND "xli %s &" /************************** * For UNIX systems, SYSTEM_MAIL and SYSTEM_MAIL_FLAGS are set by the * configure-script. */ /************************** * A place to put temporary files, it is almost always in "/tmp/" * for UNIX systems. If you include "$USER" in the definition * (e.g., "/tmp/$USER"), Lynx will replace the "$USER" with the * username of the account which invoked the Lynx image. Such * directories should already exist, and have protections/ACLs set * so that only the appropriate user(s) will have read/write access. * If the path includes a tilde (e.g, "~" or "~/lynxtmp"), Lynx will * replace the tilde with the full path for the user's home. * The definition here can be overridden at run time by setting a * "LYNX_TEMP_SPACE" environment variable, or (if that is not set) * the "TMPDIR" (unix), or "TEMP" or "TMP" (Windows,DOS,OS/2) * variable. */ #define TEMP_SPACE "/tmp/" /******************************** * Comment this line out to disable code that implements command logging * and scripting. */ #define EXP_CMD_LOGGING 1 /******************************** * Comment this line out to disable code that randomizes the names given to * temporary files. */ #define EXP_RAND_TEMPNAME 1 /******************************** * Comment this line out to let the user enter his/her email address * when sending a message. There should be no need to do this unless * your mailer agent does not put in the From: field for you. (If your * mailer agent does not automatically put in the From: field, you should * upgrade, because anonymous mail makes it far too easy for a user to * spoof someone else's email address.) */ /*#define NO_ANONYMOUS_EMAIL TRUE */ /******************************** * LIST_FORMAT defines the display for local files when LONG_LIST * is defined in the Makefile. The default set here can be changed * in lynx.cfg. * * The percent items in the list are interpreted as follows: * * %p Unix-style permission bits * %l link count * %o owner of file * %g group of file * %d date of last modification * %a anchor pointing to file or directory * %A as above but don't show symbolic links * %t type of file (description derived from MIME type) * %T MIME type as known by Lynx (from mime.types or default) * %k size of file in Kilobytes * %K as above but omit size for directories * %s size of file in bytes * * Anything between the percent and the letter is passed on to sprintf. * A double percent yields a literal percent on output. Other characters * are passed through literally. * * If you want only the filename: " %a" * * If you want a brief output: " %4K %-12.12d %a" * * For the Unix "ls -l" format: " %p %4l %-8.8o %-8.8g %7s %-12.12d %a" */ #ifdef DOSPATH #define LIST_FORMAT " %4K %-12.12d %a" #else #define LIST_FORMAT " %p %4l %-8.8o %-8.8g %7s %-12.12d %a" #endif /* * FTP_FORMAT uses the same codes as LIST_FORMAT, but applies to files shown * in an ftp listing. */ #define FTP_FORMAT "%d %-16.16t %a %K" /* * If NO_FORCED_CORE_DUMP is set to TRUE, Lynx will not force * core dumps via abort() calls on fatal errors or assert() * calls to check potentially fatal errors. The default defined * here can be changed in lynx.cfg, and the compilation or * configuration default can be toggled via the -core command * line switch. */ #define NO_FORCED_CORE_DUMP FALSE /************************** * LYNX_LSS_FILE is the location and name of the default lynx * character style sheet file. It is sought and processed at * startup of Lynx only if experimental character style code * has been compiled in, otherwise it will be ignored. Note * that use of the character style option is _experimental_ AND * _unsupported_. There is no documentation other than a sample * lynx.lss file in the samples subdirectory. You also can * define the location and name of this file via environment * variables "LYNX_LSS" or "lynx_lss" which will override the * "LYNX_LSS_FILE" definition here. You can use '~' in either or * both definitions to refer to the user's home directory. The * -lss command line switch will override these definitions. */ #ifndef LYNX_LSS_FILE #define LYNX_LSS_FILE "/usr/local/lib/lynx.lss" #endif /* LYNX_LSS_FILE */ #endif /* VMS OR UNIX */ /************************************************************* * Section 1c) Every platform must change or verify these * */ /***************************** * STARTFILE is the default starting URL if none is specified * on the command line or via a WWW_HOME environment variable; * Lynx will refuse to start without a starting URL of some kind. * STARTFILE can be remote, e.g., http://www.w3.org/default.html , * or local, e.g., file://localhost/PATH_TO/FILENAME , * where PATH_TO is replaced with the complete path to FILENAME * using Unix shell syntax and including the device on VMS. * * Normally we expect you will connect to a remote site, e.g., the Lynx starting * site: */ #define STARTFILE "http://lynx.isc.org/" /* * As an alternative, you may want to use a local URL. A good choice for this * is the user's home directory: *#define STARTFILE "file://localhost/~/" * * Your choice of STARTFILE should reflect your site's needs, and be a URL that * you can connect to reliably. Otherwise users will become confused and think * that they cannot run Lynx. */ /***************************** * HELPFILE must be defined as a URL and must have a * complete path if local: * file://localhost/PATH_TO/lynx_help/lynx_help_main.html * Replace PATH_TO with the path to the lynx_help subdirectory * for this distribution (use SHELL syntax including the device * on VMS systems). * The default HELPFILE is: * http://lynx.isc.org/release/lynx2-8-7/lynx_help/lynx_help_main.html * This should be changed here or in lynx.cfg to the local path. * The definition here can be overridden at run time by defining a * "LYNX_HELPFILE" environment variable. */ #define HELPFILE "http://lynx.isc.org/release/lynx2-8-7/lynx_help/lynx_help_main.html" /* #define HELPFILE "file://localhost/PATH_TO/lynx_help/lynx_help_main.html" */ /***************************** * DEFAULT_INDEX_FILE is the default file retrieved when the * user presses the 'I' key when viewing any document. * An index to your CWIS can be placed here or a document containing * pointers to lots of interesting places on the web. */ #define DEFAULT_INDEX_FILE "http://www.ncsa.uiuc.edu/SDG/Software/Mosaic/MetaIndex.html" /***************************** * If USE_TRACE_LOG is set FALSE, then when TRACE mode is invoked the * syserr messages will not be directed to a log file named Lynx.trace * in the account's HOME directory. The default defined here can be * toggled via the -tlog command line switch. Also, it is set FALSE * automatically when Lynx is executed in an anonymous or validation * account (if indicated via the -anonymous or -validate command line * switches, or via the check for the ANONYMOUS_USER, defined below). * When FALSE, the TRACE_LOG command (normally ';') cannot be used to * examine the Lynx Trace Log during the current session. If left * TRUE, but you wish to use command line piping of stderr to a file * you specify, include the -tlog toggle on the command line. Note * that once TRACE mode is turned on during a session and stderr is * directed to the log, all stderr messages will continue going to * the log, even if TRACE mode is turned off via the TOGGLE_TRACE * (Control-T) command. */ #define USE_TRACE_LOG TRUE /******************************* * If GOTOBUFFER is set to TRUE here or in lynx.cfg the last entered * goto URL, if any, will be offered as a default for reuse or editing * when the 'g'oto command is entered. All previously used goto URLs * can be accessed for reuse or editing via a circular buffer invoked * with the Up-Arrow or Down-Arrow keys after entering the 'g'oto * command, whether or not a default is offered. */ #define GOTOBUFFER FALSE /***************************** * If FTP_PASSIVE is set to TRUE here or in lynx.cfg, ftp transfers will * be done in passive mode. * Note: if passive transfers fail, lynx falls back to active mode, and * vice versa if active transfers fail at first. */ #define FTP_PASSIVE TRUE /***************************** * JUMPFILE is the default local file checked for shortcut URLs when * the user presses the 'J' (JUMP) key. The user will be prompted for * a shortcut entry (analogously to 'g'oto), and can enter one * or use '?' for a list of the shortcuts with associated links to * their actual URLs. See the sample jumps files in the samples * subdirectory. Make sure your jumps file includes a '?' shortcut * for a file://localhost URL to itself: * *
?
This Shortcut List * * If not defined here or in lynx.cfg, the JUMP command will invoke * the NO_JUMPFILE status line message (see LYMessages_en.h). The prompt * associated with the default jumps file is defined as JUMP_PROMPT in * LYMessages_en.h and can be modified in lynx.cfg. Additional, alternate * jumps files can be defined and mapped to keystrokes, and alternate * prompts can be set for them, in lynx.cfg, but at least one default * jumps file and associated prompt should be established before adding * others. * * On VMS, use Unix SHELL syntax (including a lead slash) to define it. * * Do not include "file://localhost" in the definition. */ /* #define JUMPFILE "/Lynx_Dir/jumps.html" */ /******************************* * If JUMPBUFFER is set to TRUE here or in lynx.cfg the last entered * jump shortcut, if any, will be offered as a default for reuse or * editing when the JUMP command is entered. All previously used * shortcuts can be accessed for reuse or editing via a circular buffer * invoked with the Up-Arrow or Down-Arrow keys after entering the JUMP * command, whether or not a default is offered. If you have multiple * jumps files and corresponding key mappings, each will have its own * circular buffer. */ #define JUMPBUFFER FALSE /******************************** * If PERMIT_GOTO_FROM_JUMP is defined, then a : or / in a jump target * will be treated as a full or partial URL (to be resolved versus the * startfile), and will be handled analogously to a 'g'oto command. * Such "random URLs" will be entered in the circular buffer for goto * URLs, not the buffer for jump targets (shortcuts). If the target * is the single character ':', it will be treated equivalently to an * Up-Arrow or Down-Arrow following a 'g'oto command, for accessing the * circular buffer of goto URLs. */ /* #define PERMIT_GOTO_FROM_JUMP */ /***************************** * If LYNX_HOST_NAME is defined here and/or in lynx.cfg, it will be * treated as an alias for the local host name in checks for URLs on * the local host (e.g., when the -localhost switch is set), and this * host name, "localhost", and HTHostName (the fully qualified domain * name of the system on which Lynx is running) will all be passed as * local. A different definition in lynx.cfg will override this one. */ /* #define LYNX_HOST_NAME "www.cc.ukans.edu" */ /********************* * LOCAL_DOMAIN is used for a tail match with the ut_host element of * the utmp or utmpx structure on systems with utmp capabilities, to * determine if a user is local to your campus or organization when * handling -restrictions=inside_foo or outside_foo settings for ftp, * news, telnet/tn3270 and rlogin URLs. An "inside" user is assumed * if your system does not have utmp capabilities. CHANGE THIS here * or in lynx.cfg. */ #define LOCAL_DOMAIN "ukans.edu" /******************************** * The DEFAULT_CACHE_SIZE specifies the number of WWW documents to be * cached in memory at one time. * * This so-called cache size (actually, number) may be modified in lynx.cfg * and or with the command line argument -cache=NUMBER The minimum allowed * value is 2, for the current document and at least one to fetch, and there * is no absolute maximum number of cached documents. On Unix, and VMS not * compiled with VAXC, whenever the number is exceeded the least recently * displayed document will be removed from memory. * * On VMS compiled with VAXC, the DEFAULT_VIRTUAL_MEMORY_SIZE specifies the * amount (bytes) of virtual memory that can be allocated and not yet be freed * before previous documents are removed from memory. If the values for both * the DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE are exceeded, then * least recently displayed documents will be freed until one or the other * value is no longer exceeded. The value can be modified in lynx.cfg. * * The Unix and VMS but not VAXC implementations use the C library malloc's * and calloc's for memory allocation, and procedures for taking the actual * amount of cache into account still need to be developed. They use only * the DEFAULT_CACHE_SIZE value, and that specifies the absolute maximum * number of documents to cache (rather than the maximum number only if * DEFAULT_VIRTUAL_MEMORY_SIZE has been exceeded, as with VAXC/VAX). */ #define DEFAULT_CACHE_SIZE 10 #if defined(VMS) && defined(VAXC) && !defined(__DECC) #define DEFAULT_VIRTUAL_MEMORY_SIZE 512000 #endif /* VMS && VAXC && !__DECC */ /******************************** * If ALWAYS_RESUBMIT_POSTS is set TRUE, Lynx always will resubmit forms * with method POST, dumping any cache from a previous submission of the * form, including when the document returned by that form is sought with * the PREV_DOC command or via the history list. Lynx always resubmits * forms with method POST when a submit button or a submitting text input * is activated, but normally retrieves the previously returned document * if it had links which you activated, and then go back with the PREV_DOC * command or via the history list. * * The default defined here can be changed in lynx.cfg, and can be toggled * via the -resubmit_posts command line switch. */ #define ALWAYS_RESUBMIT_POSTS FALSE /******************************** * CHARACTER_SET defines the default character set, i.e., that assumed * to be installed on the user's terminal. It determines which characters * or strings will be used to represent 8-bit character entities within * HTML. New character sets may be defined as explained in the README * files of the src/chrtrans directory in the Lynx source code distribution. * For Asian (CJK) character sets, it also determines how Kanji code will * be handled. The default defined here can be changed in lynx.cfg, and * via the 'o'ptions menu. The 'o'ptions menu setting will be stored in * the user's RC file whenever those settings are saved, and thereafter * will be used as the default. Also see lynx.cfg for information about * the -raw switch and LYK_RAW_TOGGLE command. * * Since Lynx now supports a wide range of platforms it may be useful * to note that cpXXX codepages used by IBM PC compatible computers, * and windows-xxxx used by native MS-Windows apps. * * Recognized character sets include: * * string for 'O'ptions Menu MIME name * =========================== ========= * 7 bit approximations (US-ASCII) us-ascii * Western (ISO-8859-1) iso-8859-1 * Western (cp850) cp850 * Western (windows-1252) windows-1252 * IBM PC US codepage (cp437) cp437 * DEC Multinational dec-mcs * Macintosh (8 bit) macintosh * NeXT character set next * HP Roman8 hp-roman8 * Chinese euc-cn * Japanese (EUC-JP) euc-jp * Japanese (Shift_JIS) shift_jis * Korean euc-kr * Taipei (Big5) big5 * Vietnamese (VISCII) viscii * Eastern European (ISO-8859-2) iso-8859-2 * Eastern European (cp852) cp852 * Eastern European (windows-1250) windows-1250 * Latin 3 (ISO-8859-3) iso-8859-3 * Latin 4 (ISO-8859-4) iso-8859-4 * Baltic Rim (cp775) cp775 * Baltic Rim (windows-1257) windows-1257 * Cyrillic (ISO-8859-5) iso-8859-5 * Cyrillic (cp866) cp866 * Cyrillic (windows-1251) windows-1251 * Cyrillic (KOI8-R) koi8-r * Arabic (ISO-8859-6) iso-8859-6 * Arabic (cp864) cp864 * Arabic (windows-1256) windows-1256 * Greek (ISO-8859-7) iso-8859-7 * Greek (cp737) cp737 * Greek2 (cp869) cp869 * Greek (windows-1253) windows-1253 * Hebrew (ISO-8859-8) iso-8859-8 * Hebrew (cp862) cp862 * Hebrew (windows-1255) windows-1255 * Turkish (ISO-8859-9) iso-8859-9 * ISO-8859-10 iso-8859-10 * Ukrainian Cyrillic (cp866u) cp866u * Ukrainian Cyrillic (KOI8-U) koi8-u * UNICODE (UTF-8) utf-8 * RFC 1345 w/o Intro mnemonic+ascii+0 * RFC 1345 Mnemonic mnemonic * Transparent x-transparent */ #define CHARACTER_SET "iso-8859-1" /***************************** * PREFERRED_LANGUAGE is the language in MIME notation (e.g., "en", * "fr") which will be indicated by Lynx in its Accept-Language headers * as the preferred language. If available, the document will be * transmitted in that language. This definition can be overridden via * lynx.cfg. Users also can change it via the 'o'ptions menu and save * that preference in their RC file. This may be a comma-separated list * of languages in decreasing preference. */ #define PREFERRED_LANGUAGE "en" /***************************** * PREFERRED_CHARSET specifies the character set in MIME notation (e.g., * "ISO-8859-2", "ISO-8859-5") which Lynx will indicate you prefer in * requests to http servers using an Accept-Charsets header. * This definition can be overridden via lynx.cfg. Users also can change it * via the 'o'ptions menu and save that preference in their RC file. * The value should NOT include "ISO-8859-1" or "US-ASCII", since those * values are always assumed by default. * If a file in that character set is available, the server will send it. * If no Accept-Charset header is present, the default is that any * character set is acceptable. If an Accept-Charset header is present, * and if the server cannot send a response which is acceptable * according to the Accept-Charset header, then the server SHOULD send * an error response with the 406 (not acceptable) status code, though * the sending of an unacceptable response is also allowed. (RFC2068) */ #define PREFERRED_CHARSET "" /***************************** * If MULTI_BOOKMARK_SUPPORT is set to MBM_STANDARD or MBM_ADVANCED, and * BLOCK_MULTI_BOOKMARKS (see below) is FALSE, and sub-bookmarks exist, all * bookmark operations will first prompt the user to select an active * sub-bookmark file or the default bookmark file. MBM_OFF is the default so * that one (the default) bookmark file will be available initially. The * default set here can be overridden in lynx.cfg. The user can turn on * multiple bookmark support via the 'o'ptions menu, and can save that choice as * the startup default via the .lynxrc file. When on, the setting can be * STANDARD or ADVANCED. If support is set to the latter, and the user mode * also is ADVANCED, the VIEW_BOOKMARK command will invoke a status line prompt * at which the user can enter the letter token (A - Z) of the desired bookmark, * or '=' to get a menu of available bookmark files. The menu always is * presented in NOVICE or INTERMEDIATE mode, or if the support is set to * STANDARD. No prompting or menu display occurs if only one (the startup * default) bookmark file has been defined (define additional ones via the * 'o'ptions menu). The startup default, however set, can be overridden on the * command line via the -restrictions=multibook or the -anonymous or -validate * switches. */ #ifndef MULTI_BOOKMARK_SUPPORT #define MULTI_BOOKMARK_SUPPORT MBM_OFF #endif /* MULTI_BOOKMARK_SUPPORT */ /***************************** * If BLOCK_MULTI_BOOKMARKS is set TRUE, multiple bookmark support will * be forced off, and cannot be toggled on via the 'o'ptions menu. This * compilation setting can be overridden via lynx.cfg. */ #ifndef BLOCK_MULTI_BOOKMARKS #define BLOCK_MULTI_BOOKMARKS FALSE #endif /* BLOCK_MULTI_BOOKMARKS */ /******************************** * URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES are strings which will be * prepended (together with a scheme://) and appended to the first element * of command line or 'g'oto arguments which are not complete URLs and * cannot be opened as a local file (file://localhost/string). Both * can be comma-separated lists. Each prefix must end with a dot, each * suffix must begin with a dot, and either may contain other dots (e.g., * .co.jp). The default lists are defined here, and can be changed * in lynx.cfg. Each prefix will be used with each suffix, in order, * until a valid Internet host is created, based on a successful DNS * lookup (e.g., foo will be tested as www.foo.com and then www.foo.edu * etc.). The first element can include a :port and/or /path which will * be restored with the expanded host (e.g., wfbr:8002/dir/lynx will * become http://www.wfbr.edu:8002/dir/lynx). The prefixes will not be * used if the first element ends in a dot (or has a dot before the * :port or /path), and similarly the suffixes will not be used if the * the first element begins with a dot (e.g., .nyu.edu will become * http://www.nyu.edu without testing www.nyu.com). Lynx will try to * guess the scheme based on the first field of the expanded host name, * and use "http://" as the default (e.g., gopher.wfbr.edu or gopher.wfbr. * will be made gopher://gopher.wfbr.edu). */ #define URL_DOMAIN_PREFIXES "www." #define URL_DOMAIN_SUFFIXES ".com,.edu,.net,.org" /******************************** * If LIST_NEWS_NUMBERS is set TRUE, Lynx will use an ordered list * and include the numbers of articles in news listings, instead of * using an unordered list. * * The default defined here can be changed in lynx.cfg. */ #define LIST_NEWS_NUMBERS FALSE /******************************** * If LIST_NEWS_DATES is set TRUE, Lynx will include the dates of * articles in news listings. The dates always are included in the * articles, themselves. * * The default defined here can be changed in lynx.cfg. */ #define LIST_NEWS_DATES FALSE /************************* * Set NEWS_POSTING to FALSE if you do not want to support posting to * news groups via Lynx. If left TRUE, Lynx will use its news gateway to * post new messages or followups to news groups, using the URL schemes * described in the "Supported URL" section of the online 'h'elp. The * posts will be attempted via the nntp server specified in the URL, or * if none was specified, via the NNTPSERVER configuration or environment * variable. Links with these URLs for posting or sending followups are * created by the news gateway when reading group listings or articles * from nntp servers if the server indicates that it permits posting. * The setting here can be changed in lynx.cfg. */ #define NEWS_POSTING TRUE /************************* * Define LYNX_SIG_FILE to the name of a file containing a signature which * can be appended to email messages and news postings or followups. The * user will be prompted whether to append it. It is sought in the home * directory. If it is in a subdirectory, begin it with a dot-slash * (e.g., ./lynx/.lynxsig). The definition here can be changed in lynx.cfg. */ #define LYNX_SIG_FILE ".lynxsig" /******************************** * BIBP_GLOBAL_SERVER is the default global server for bibp: links, used * when a local bibhost or document-specified citehost is unavailable. */ #define BIBP_GLOBAL_SERVER "http://usin.org/" /******************************** * If USE_SELECT_POPUPS is set FALSE, Lynx will present a vertical list * of radio buttons for the OPTIONs in SELECT blocks which lack the * MULTIPLE attribute, instead of using a popup menu. Note that if * the MULTIPLE attribute is present in the SELECT start tag, Lynx * always will create a vertical list of checkboxes for the OPTIONs. * * The default defined here can be changed in lynx.cfg. It can be * set and saved via the 'o'ptions menu to override the compilation * and configuration defaults, and the default always can be toggled * via the -popup command line switch. */ #define USE_SELECT_POPUPS TRUE /******************************** * If COLLAPSE_BR_TAGS is set FALSE, Lynx will not collapse serial * BR tags. If set TRUE, two or more concurrent BRs will be collapsed * into a single blank line. Note that the valid way to insert extra * blank lines in HTML is via a PRE block with only newlines in the * block. * * The default defined here can be changed in lynx.cfg. */ #define COLLAPSE_BR_TAGS TRUE /******************************** * If SET_COOKIES is set FALSE, Lynx will ignore Set-Cookie headers * in http server replies. * * The default defined here can be changed in lynx.cfg, and can be toggled * via the -cookies command line switch. */ #define SET_COOKIES TRUE /******************************** * If SEND_USERAGENT is set FALSE, Lynx will not send a user-agent string. * You can override this in the 'O'ptions menu. */ #define SEND_USERAGENT TRUE /******************************* * If ACCEPT_ALL_COOKIES is set TRUE, and SET_COOKIES is TRUE, Lynx will * accept all cookies. * * The default defined here can be changed in lynx.cfg, and .lynxrc, or * toggled via the -accept_all_cookies command line switch. */ #define ACCEPT_ALL_COOKIES FALSE /**************************************************************** * Section 2. Things that you probably want to change or review * */ /***************************** * The following three definitions set the number of seconds for * pauses following status line messages that would otherwise be * replaced immediately, and are more important than the unpaused * progress messages. Those set by INFOSECS are also basically * progress messages (e.g., that a prompted input has been canceled) * and should have the shortest pause. Those set by MESSAGESECS are * informational (e.g., that a function is disabled) and should have * a pause of intermediate duration. Those set by ALERTSECS typically * report a serious problem and should be paused long enough to read * whenever they appear (typically unexpectedly). The default values * defined here can be modified via lynx.cfg, should longer pauses be * desired for braille-based access to Lynx. */ #define INFOSECS 1 #define MESSAGESECS 2 #define ALERTSECS 3 #define DEBUGSECS 0 #define REPLAYSECS 0 /****************************** * SHOW_COLOR controls whether the program displays in color by default. */ #ifdef COLOR_CURSES #define SHOW_COLOR TRUE #else #define SHOW_COLOR FALSE #endif /****************************** * SHOW_CURSOR controls whether or not the cursor is hidden or appears * over the current link, or current option in select popup windows. * Showing the cursor is handy if you are a sighted user with a poor * terminal that can't do bold and reverse video at the same time or * at all. It also can be useful to blind users, as an alternative * or supplement to setting LINKS_AND_FIELDS_ARE_NUMBERED or * LINKS_ARE_NUMBERED. * * The default defined here can be changed in lynx.cfg. It can be * set and saved via the 'o'ptions menu to override the compilation * and configuration defaults, and the default always can be toggled * via the -show_cursor command line switch. */ #define SHOW_CURSOR FALSE /****************************** * UNDERLINE_LINKS controls whether links are underlined by default, or shown * in bold. Normally this default is set from the configure script. */ #ifndef HAVE_CONFIG_H #define UNDERLINE_LINKS FALSE #endif /****************************** * VERBOSE_IMAGES controls whether or not Lynx replaces the [LINK], [INLINE] * and [IMAGE] comments (for images without ALT) with filenames of these * images. This is extremely useful because now we can determine immediately * what images are just decorations (button.gif, line.gif) and what images are * important. * * The default defined here can be changed in lynx.cfg. */ #define VERBOSE_IMAGES TRUE /****************************** * BOXVERT and BOXHORI control the layout of popup menus. Set to 0 if your * curses supports line-drawing characters, set to '*' or any other character * to not use line-drawing (e.g., '|' for vertical and '-' for horizontal). */ #ifndef HAVE_CONFIG_H #ifdef DOSPATH #define BOXVERT 0 #define BOXHORI 0 #else #define BOXVERT '|' /* #define BOXVERT 0 */ #define BOXHORI '-' /* #define BOXHORI 0 */ #endif /* DOSPATH */ #endif /* !HAVE_CONFIG_H */ /****************************** * LY_UMLAUT controls the 7-bit expansion of characters with dieresis or * umlaut. If defined, a digraph is displayed, e.g., auml --> ae * Otherwise, a single character is displayed, e.g., auml --> a * Note that this is currently not supported with the chartrans code, * or rather it doesn't have an effect if translations for a display * character set are taken from one of the *.tbl files in src/chrtrans. * One would have to modify the corresponding *.tbl file to change the # 7-bit replacements for these characters. */ #define LY_UMLAUT /******************************* * Execution links/scripts configuration. * * Execution links and scripts allow you to run * local programs by activating links within Lynx. * * An execution link is of the form: * * lynxexec: * or: * lynxexec:// * or: * lynxprog: * or: * lynxprog:// * * where is a command that Lynx will run when the link is * activated. The double-slash should be included if the command begins * with an '@', as for executing VMS command files. Otherwise, the double- * slash can be omitted. * Use lynxexec for commands or scripts that generate a screen output which * should be held via a prompt to press before returning to Lynx * for display of the current document. * Use lynxprog for programs such as mail which do not require a pause before * Lynx restores the display of the current document. * * Execution scripts take the form of a standard * URL. Extension mapping or MIME typing is used * to decide if the file is a script and should be * executed. The current extensions are: * .csh, .ksh, and .sh on UNIX systems and .com on * VMS systems. Any time a file of this type is * accessed Lynx will look at the user's options * settings to decide if the script can be executed. * Current options include: Only exec files that * reside on the local machine and are referenced * with a "file://localhost" URL, All execution * off, and all execution on. * * The following definitions will add execution * capabilities to Lynx. You may define none, one * or both. * * I strongly recommend that you define neither one * of these since execution links/scripts can represent * very serious security risk to your system and its * users. If you do define these I suggest that * you only allow users to execute files/scripts * that reside on your local machine. * * YOU HAVE BEEN WARNED! * * Note: if you are enabling execution scripts you should * also see src/HTInit.c to verify/change the execution * script extensions and/or commands. */ /* #define EXEC_LINKS */ /* #define EXEC_SCRIPTS */ #if defined(EXEC_LINKS) || defined(EXEC_SCRIPTS) /********** * if ENABLE_OPTS_CHANGE_EXEC is defined, the user will be able to change * the execution status within the Options Menu. */ /* #define ENABLE_OPTS_CHANGE_EXEC */ /********** * if NEVER_ALLOW_REMOTE_EXEC is defined, * local execution of scripts or lynxexec & lynxprog URLs will be implemented * only from HTML files that were accessed via a "file://localhost/" URL * and the Options Menu for "Local executions links" will allow toggling * only between "ALWAYS OFF" and "FOR LOCAL FILES ONLY". */ /* #define NEVER_ALLOW_REMOTE_EXEC */ /***************************** * These are for executable shell scripts and links. * Set to FALSE unless you really know what you're * doing. * * This only applies if you are compiling with EXEC_LINKS or * EXEC_SCRIPTS defined. * * The first two settings: * LOCAL_EXECUTION_LINKS_ALWAYS_ON * LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE * specify the DEFAULT settings of the users execution link * options (they can also be overridden in lynx.cfg), but * the user may still change those options. * If you do not wish the user to be able to change the * execution link settings you may wish to use the command line option: * -restrictions=exec_frozen * * LOCAL_EXECUTION_LINKS_ALWAYS_ON will be FALSE * if NEVER_ALLOW_REMOTE_EXEC has been defined. * * if LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS is true, * all execution links will be disabled when the -anonymous * command-line option is used. Anonymous users are not allowed * to change the execution options from within the Lynx Options Menu, * so you might be able to use this option to enable execution links * and set LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE to TRUE * to give anonymous execution-link capability without compromising * your system (see comments about TRUSTED_EXEC rules in lynx.cfg ). */ #define LOCAL_EXECUTION_LINKS_ALWAYS_ON FALSE #define LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE FALSE #define LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS FALSE #endif /* defined(EXEC_LINKS) || defined(EXEC_SCRIPTS) */ /********** * *** This is for those -- e.g. DOS users -- who do not have configure; * *** others should use the configure switch --enable-lynxcgi-links . * * UNIX: * ===== * CGI script support. Defining LYNXCGI_LINKS allows you to use the * * lynxcgi:path * * URL which allows lynx to access a cgi script directly without the need for * a http daemon. Redirection is not supported but just about everything * else is. If the path is not an executable file then the URL is * rewritten as file://localhost and passed to the file loader. This means * that if your http:html files are currently set up to use relative * addressing, you should be able to fire up your main page with lynxcgi:path * and everything should work as if you were talking to the http daemon. * * Note that TRUSTED_LYNXCGI directives must be defined in your lynx.cfg file * if you wish to place restrictions on source documents and/or paths for * lynxcgi links. * * The cgi scripts are called with a fork()/execve() sequence so you don't * have to worry about people trying to abuse the code. :-) * * George Lindholm (George.Lindholm@ubc.ca) * * VMS: * ==== * The lynxcgi scheme, if enabled, yields an informational message regardless * of the path, and use of the freeware OSU DECthreads server as a local * script server is recommended instead of lynxcgi URLs. Uncomment the * following line to define LYNXCGI_LINKS, and when running Lynx, enter * lynxcgi:advice as a G)oto URL for more information and links to the * OSU server distribution. */ #ifndef HAVE_CONFIG_H /* #define LYNXCGI_LINKS */ #endif /********************************* * MAIL_SYSTEM_ERROR_LOGGING will send a message to the owner of * the information if there is one, every time * that a document cannot be accessed! * This is just the default, it can be changed in lynx.cfg, and error * logging can be turned off with the -nolog command line option. * * NOTE: This can generate A LOT of mail, be warned. */ #define MAIL_SYSTEM_ERROR_LOGGING FALSE /*mail a message for every error? */ /********************************* * If a document cannot be accessed, and MAIL_SYSTEM_ERROR_LOGGING * is on and would send a message to the owner of the information, * but no owner is known, then the message will be sent to ALERTMAIL * instead - if it is defined as a non-empty email address. * * NOTE: This can generate A REAL LOT of mail, be warned!!! */ /* #define ALERTMAIL "webmaster@localhost" *//*error recipient if no owner */ /********************************* * If CHECKMAIL is set to TRUE, the user will be informed (via a status line * message) about the existence of any unread mail at startup of Lynx, and * will get status line messages if subsequent new mail arrives. If a jumps * file with a lynxprog URL for invoking mail is available, or your html * pages include an mail launch file URL, the user thereby can access mail * and read the messages. * This is just the default, it can be changed in lynx.cfg. The checks and * status line reports will not be performed if Lynx has been invoked with * the -restrictions=mail switch. * * VMS USERS !!! * New mail is normally broadcast as it arrives, via "unsolicited screen * broadcasts", which can be "wiped" from the Lynx display via the Ctrl-W * command. You may prefer to disable the broadcasts and use CHECKMAIL * instead (e.g., in a public account which will be used by people who * are ignorant about VMS). */ #define CHECKMAIL FALSE /* report unread and new mail messages */ /********************************* * Vi or Emacs movement keys. These are defaults, * which can be changed in lynx.cfg , the Options Menu or .lynxrc . */ #define VI_KEYS_ALWAYS_ON FALSE /* familiar h j k l */ #define EMACS_KEYS_ALWAYS_ON FALSE /* familiar ^N ^P ^F ^B */ /********************************* * DEFAULT_KEYPAD_MODE may be set to NUMBERS_AS_ARROWS * or LINKS_ARE_NUMBERED * or LINKS_AND_FIELDS_ARE_NUMBERED * to specify whether numbers (e.g. [10]) appear before all links, * allowing immediate access by entering the number on the keyboard, * or numbers on the numeric key-pad work like arrows; * the 3rd option causes form fields also to be preceded by numbers. * The first two options (but not the last) can be changed in lynx.cfg * and all three can be changed via the Options Menu. */ #define DEFAULT_KEYPAD_MODE NUMBERS_AS_ARROWS /******************************** * The default search. * This is a default that can be overridden in lynx.cfg or by the user! */ #define CASE_SENSITIVE_ALWAYS_ON FALSE /* case sensitive user search */ /******************************** * If NO_DOT_FILES is set TRUE here or in lynx.cfg, the user will not be * allowed to specify files beginning with a dot in reply to output filename * prompts, and files beginning with a dot (e.g., file://localhost/foo/.lynxrc) * will not be included in the directory browser's listings. The setting here * will be overridden by the setting in lynx.cfg. If FALSE, you can force it * to be treated as TRUE via -restrictions=dotfiles (or -anonymous, which sets * this and most other restrictions). * * If it is FALSE at startup of Lynx, the user can regulate it via the * 'o'ptions menu, and may save the preference in the RC file. */ #define NO_DOT_FILES TRUE /* disallow access to dot files */ /******************************** * If MAKE_LINKS_FOR_ALL_IMAGES is TRUE, all images will be given links * which can be ACTIVATEd. For inlines, the ALT or pseudo-ALT ("[INLINE]") * strings will be links for the resolved SRC rather than just text. For * ISMAP or other graphic links, the ALT or pseudo-ALT ("[ISMAP]" or "[LINK]") * strings will have '-' and a link labeled "[IMAGE]" for the resolved SRC * appended. See also VERBOSE_IMAGES flag. * * The default defined here can be changed in lynx.cfg, and the user can * use LYK_IMAGE_TOGGLE to toggle the feature on or off at run time. * * The default also can be toggled via an "-image_links" command line switch. */ #define MAKE_LINKS_FOR_ALL_IMAGES FALSE /* inlines cast to links */ /******************************** * If MAKE_PSEUDO_ALTS_FOR_INLINES is FALSE, inline images which do not * specify an ALT string will not have "[INLINE]" inserted as a pseudo-ALT, * i.e., they'll be treated as having ALT="". If MAKE_LINKS_FOR_ALL_IMAGES * is defined or toggled to TRUE, however, the pseudo-ALTs will be created * for inlines, so that they can be used as links to the SRCs. * See also VERBOSE_IMAGES flag. * * The default defined here can be changed in lynx.cfg, and the user can * use LYK_INLINE_TOGGLE to toggle the feature on or off at run time. * * The default also can be toggled via a "-pseudo_inlines" command line * switch. */ #define MAKE_PSEUDO_ALTS_FOR_INLINES TRUE /* Use "[INLINE]" pseudo-ALTs */ /******************************** * If SUBSTITUTE_UNDERSCORES is TRUE, the _underline_ format will be used * for emphasis tags in dumps. * * The default defined here can be changed in lynx.cfg, and the user can * toggle the default via a "-underscore" command line switch. */ #define SUBSTITUTE_UNDERSCORES FALSE /* Use _underline_ format in dumps */ /******************************** * If QUIT_DEFAULT_YES is defined as TRUE then when the QUIT command * is entered, any response other than n or N will confirm. Define it * as FALSE if you prefer the more conservative action of requiring an * explicit Y or y to confirm. The default defined here can be changed * in lynx.cfg. */ #define QUIT_DEFAULT_YES TRUE /******************************** * If TEXT_SUBMIT_CONFIRM_WANTED is defined (to anything), the user will be * prompted for confirmation before Lynx submits a form with only one input * field (of type text) to the server, after the user has pressed * or on the field. Since the is no other way such as a "submit" * button to submit, normally the form gets submitted automatically in this * case, but some users may find this surprising and expect to just * move to the next link as for other text entry fields. */ /* #define TEXT_SUBMIT_CONFIRM_WANTED */ /******************************** * If TEXTFIELDS_MAY_NEED_ACTIVATION is defined (to anything), * the option TEXTFIELDS_NEED_ACTIVATION in lynx.cfg or the command * line option -tna can be used to require explicit activation * before text input fields can be changed with the built-in line * editor. */ #define TEXTFIELDS_MAY_NEED_ACTIVATION /******************************** * The following three definitions control some aspects of extended * textarea handling. TEXTAREA_EXPAND_SIZE is the number of new empty * lines that get appended at the end of a textarea by a GROWTEXTAREA * key. If TEXTAREA_AUTOGROW is defined (to anything), or * in the last line of a textarea automatically extends the * area by adding a new line. If TEXTAREA_AUTOEXTEDIT is defined (to * anything), a key mapped to DWIMEDIT will invoke the external editor * like EDITTEXTAREA when used in a text input field. Comment those * last two definitions out to disable the corresponding behavior. * See under KEYMAP in lynx.cfg for mapping keys to GROWTEXTAREA or * DWIMEDIT actions. */ #define TEXTAREA_EXPAND_SIZE 5 #define TEXTAREA_AUTOGROW #define TEXTAREA_AUTOEXTEDIT /******************************** * If BUILTIN_SUFFIX_MAPS is defined (to anything), default mappings * for file extensions (aka suffixes) will be compiled in (see * src/HTInit.c). By removing the definition, the default mappings * are suppressed except for a few very basic ones for text/html. * See GLOBAL_EXTENSION_MAP, PERSONAL_EXTENSION_MAP above and SUFFIX, * SUFFIX_ORDER in lynx.cfg for other ways to map file extensions. */ #define BUILTIN_SUFFIX_MAPS /******************************** * These definitions specify files created or used in conjunction * with traversals. See CRAWL.ANNOUNCE for more information. */ #define TRAVERSE_FILE "traverse.dat" #define TRAVERSE_FOUND_FILE "traverse2.dat" #define TRAVERSE_REJECT_FILE "reject.dat" #define TRAVERSE_ERRORS "traverse.errors" /**************************************************************** * The LYMessages_en.h header defines default, English strings * used in status line prompts, messages, and warnings during * program execution. See the comments in LYMessages_en.h for * information on translating or customizing them for your site. */ #ifndef LYMESSAGES_EN_H #include #endif /* !LYMESSAGES_EN_H */ /**************************************************************** * DEFAULT_VISITED_LINKS may be set to one or more of * VISITED_LINKS_AS_FIRST_V * VISITED_LINKS_AS_TREE * VISITED_LINKS_AS_LATEST * VISITED_LINKS_REVERSE * to change the organization of the Visited Links page. * * (Not all combinations are meaningful; see src/LYrcFile.c for a list * in the visited_links_tbl table). */ #define DEFAULT_VISITED_LINKS (VISITED_LINKS_AS_LATEST | VISITED_LINKS_REVERSE) /**************************************************************** * If USE_CACHEJAR is set to TRUE the user will be able to view, * access and delete cached documents in current lynx session. */ #ifndef USE_CACHEJAR /* #define USE_CACHEJAR TRUE */ #endif /**************************************************************** * If USE_SESSIONS is set to TRUE the user will be able to save, * resume and in general manipulate with lynx sessions. */ #ifndef USE_SESSIONS /* #define USE_SESSIONS TRUE */ #endif #define MAX_SESSIONS 10000 /* * If USE_SESSIONS is TRUE you may tune it fine how it will work: */ #define GOTOURL_IN_SESSION /* Allow to save goto url */ #define GOTOURL_OUT_SESSION /* Allow to restore goto url */ #define HISTORY_IN_SESSION /* Allow to save history */ #define HISTORY_OUT_SESSION /* Allow to restore history */ #define SEARCH_IN_SESSION /* Allow to save search string */ #define SEARCH_OUT_SESSION /* Allow to restore search string */ #define VLINK_IN_SESSION /* Allow to save visited link */ #define VLINK_OUT_SESSION /* Allow to restore visited link */ /**************************************************************** * The STATUSBUFSIZE defines how many entries will be stored in * cyclic buffer of statusline messages. This is specially useful * for users who use lynx on a terminal with more than 40 lines. */ /* #define STATUSBUFSIZE 90 */ /**************************************************************** * If USE_PROGRESSBAR is TRUE the user will be able to set * download progress as odometer(thermometer) display, ie: * * 80% IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII * */ /* #define USE_PROGRESSBAR TRUE */ /**************************************************************** * Section 3. Things that you should not change until you * have a good knowledge of the program */ #define LYNX_NAME "Lynx" /* The strange-looking comments on the next line tell PRCS to replace * the version definition with the Project Version on checkout. Just * ignore it. - kw */ /* $Format: "#define LYNX_VERSION \"$ProjectVersion$\""$ */ #define LYNX_VERSION "2.8.7rel.2" #define LYNX_WWW_HOME "http://lynx.isc.org/" #define LYNX_WWW_DIST "http://lynx.isc.org/current/" /* $Format: "#define LYNX_DATE \"$ProjectDate$\""$ */ #define LYNX_DATE "Mon, 21 Jun 2010 02:27:35 -0700" #define LYNX_DATE_OFF 5 /* truncate the automatically-generated date */ #define LYNX_DATE_LEN 11 /* truncate the automatically-generated date */ #ifdef UNICODE #define W32_STRING(s) L##s #else #define W32_STRING(s) s #endif #define LYNX_SUBKEY W32_STRING("Software\\Lynx") #define LINESIZE 1024 /* max length of line to read from file */ #define MAXLINKS 1024 /* max links on one screen */ #ifndef SEARCH_GOAL_LINE #define SEARCH_GOAL_LINE 4 /* try to position search target there */ #endif #define MAXCHARSETS 60 /* max character sets supported */ #define TRST_MAXROWSPAN 200 /* max rowspan accepted by TRST code */ #define TRST_MAXCOLSPAN 200 /* max colspan and COL/COLGROUP span accepted */ #define MAX_TABLE_ROWS 200 /* max rows for tables */ #define MAX_TABLE_COLS 200 /* max cols for tables */ #define SAVE_TIME_NOT_SPACE /* minimize number of some malloc calls */ /* Win32 may support more, but old win16 helper apps may not. */ #if defined(__DJGPP__) || defined(_WINDOWS) #define FNAMES_8_3 #endif #ifdef FNAMES_8_3 #define HTML_SUFFIX ".htm" #else #define HTML_SUFFIX ".html" #endif #ifndef FNAME_LYNXRC #ifdef FNAMES_8_3 #define FNAME_LYNXRC "lynx.rc" #else #define FNAME_LYNXRC ".lynxrc" #endif /* FNAMES_8_3 */ #endif #ifndef FNAME_LYNX_COOKIES #ifdef FNAMES_8_3 #define FNAME_LYNX_COOKIES "cookies" #else #define FNAME_LYNX_COOKIES ".lynx_cookies" #endif /* FNAMES_8_3 */ #endif #ifndef FNAME_LYNX_TRACE #ifdef FNAMES_8_3 #define FNAME_LYNX_TRACE "LY-TRACE.LOG" #else #define FNAME_LYNX_TRACE "Lynx.trace" #endif /* FNAMES_8_3 */ #endif #define BIN_SUFFIX ".bin" #define TEXT_SUFFIX ".txt" #ifdef VMS /* ** Use the VMS port of gzip for uncompressing both .Z and .gz files. */ #define UNCOMPRESS_PATH "gzip -d" #define COPY_PATH "copy/nolog/noconf" #define GZIP_PATH "gzip" #define BZIP2_PATH "bzip2" #define TELNET_PATH "telnet" #define TN3270_PATH "tn3270" #define RLOGIN_PATH "rlogin" #else #ifdef DOSPATH #ifdef _WINDOWS #ifdef SYSTEM_MAIL #undef SYSTEM_MAIL #endif #ifdef SYSTEM_MAIL_FLAGS #undef SYSTEM_MAIL_FLAGS #endif #ifdef USE_ALT_BLAT_MAILER #define SYSTEM_MAIL "BLAT" #define SYSTEM_MAIL_FLAGS "" #else #define SYSTEM_MAIL "BLATJ" #define SYSTEM_MAIL_FLAGS "" #endif #else /* have to define something... */ #ifdef SYSTEM_MAIL #undef SYSTEM_MAIL #endif /* SYSTEM_MAIL */ #define SYSTEM_MAIL "sendmail" #define SYSTEM_MAIL_FLAGS "-t -oi" #endif /* ** The following executables may be used at run time. Unless you change ** the definitions to include the full directories, they will be sought ** from your PATH at run-time; they should be available as "cp.exe", ** "mv.exe" and so on. To get those programs look for GNU-port stuff ** elsewhere. ** Currently, if compiled with -DUSE_ZLIB and without -DDIRED_SUPPORT ** (default), the following from the list below are required: ** MV_PATH (mv.exe) - for bookmark handling (DEL_BOOKMARK command) ** UNCOMPRESS_PATH - for automatic decompression of files in Unix ** compress format ** TELNET_PATH, TN3270_PATH, RLOGIN_PATH - for access to "telnet:", ** "tn3270:", and "rlogin:" URLs. ** If they are not defined right, the corresponding operations may fail ** in unexpected and obscure ways! ** ** WINDOWS/DOS ** =========== */ #ifndef HAVE_CONFIG_H #define COMPRESS_PATH "compress" #define UNCOMPRESS_PATH "uncompress" #define UUDECODE_PATH "uudecode" #define ZCAT_PATH "zcat" #define GZIP_PATH "gzip" #define BZIP2_PATH "bzip2" #define MV_PATH "mv" #define INSTALL_PATH "install" #define TAR_PATH "tar" #define ZIP_PATH "zip" #define UNZIP_PATH "unzip" #define RM_PATH "rm" #define TELNET_PATH "telnet" #define TN3270_PATH "tn3270" #define RLOGIN_PATH "rlogin" /* see src/LYLocal.c for these */ #define TAR_UP_OPTIONS "-cf" #define TAR_DOWN_OPTIONS "-xf" #define TAR_PIPE_OPTIONS "-" #define TAR_FILE_OPTIONS "" /* * These are not used: * #define COPY_PATH "cp" * #define CHMOD_PATH "chmod" * #define MKDIR_PATH "mkdir" * #define TOUCH_PATH "touch" */ #endif /* HAVE_CONFIG_H */ #else /* Unix */ /* Standard locations are defined via the configure script. When * helper applications are in your home directory or other nonstandard * locations, you probably will have to preset the path to them with * environment variables (see INSTALLATION, Section II-1d). */ #endif /* DOSPATH */ #endif /* VMS */ /***************************** * I have not ported multibyte support for EBCDIC. In fact, some multibyte * code in LYLowerCase() crashes on EBCDIC strings. -- gil */ #if ! defined(NOT_ASCII) /***************************** * SUPPORT_MULTIBYTE_EDIT provides better support of CJK characters to * Lynx's Line Editor. JIS X0201 Kana is partially supported. The * reason why I didn't support it fully is I think supporting it is not * required so much and I don't have an environment to test it. - TH */ #define SUPPORT_MULTIBYTE_EDIT #endif /* ! defined(NOT_ASCII) */ /***************************** * SUPPORT_CHDIR provides CD command (bound to 'C' by default). It allows * changing directory to arbitrary location (if OS allows them). If dired is * enabled, user will be able to visit any directory and view any file allowed * according to file permissions or ACLs. */ #define SUPPORT_CHDIR /***************************** * MARK_HIDDEN_LINKS controls whether hidden links are shown with the title * set by the HIDDEN_LINK_MARKER string in lynx.cfg */ #define MARK_HIDDEN_LINKS /***************************** * USE_TH_JP_AUTO_DETECT, CONV_JISX0201KANA_JISX0208KANA, * and KANJI_CODE_OVERRIDE are the macros for Japanese. - TH */ /***************************** * USE_TH_JP_AUTO_DETECT enables a new Japanese charset detection routine. * With the old detection strategy, Lynx always thought a document was * written in mixture of three kanji codes (JIS, EUC and SJIS). The new * strategy is for Lynx to first assume the document is written in one code * or JIS + one other kanji code (JIS, EUC, SJIS, EUC+JIS and SJIS+JIS). * The first assumption is usually correct, but if the assumption is wrong, * Lynx falls back to the old assumption of the three kanji codes mixed. */ #define USE_TH_JP_AUTO_DETECT /***************************** * If CONV_JISX0201KANA_JISX0208KANA is set, Lynx will convert * JIS X0201 Kana to JIS X0208 Kana, i.e., convert half-width kana * to full-width. */ #define CONV_JISX0201KANA_JISX0208KANA /***************************** * Uncomment the following line to enable the kanji code override routine. * The code can be changed by pressing ^L. More precisely, this allows * the user to override the assumption about the kanji code for the document * which Lynx has made on the basis of a META tag and HTTP response. */ /*#define KANJI_CODE_OVERRIDE */ /************************** * SSL_CERT_FILE contains valid SSL CA certificates. Set this to a string * to provide a runtime default value. */ #define SSL_CERT_FILE NULL /**************************************************************** * Section 4. Things you MUST check only if you plan to use Lynx * in an anonymous account (allow public access to Lynx). * This section may be skipped by those people building * Lynx for private use only. * */ /***************************** * Enter the name of your anonymous account if you have one * as ANONYMOUS_USER. UNIX systems will use a cuserid * or get_login call to determine if the current user is * the ANONYMOUS_USER. VMS systems will use getenv("USER"). * * You may use the "-anonymous" option for multiple accounts, * or for precautionary reasons in the anonymous account, as well. * * Specify privileges for the anonymous account below. * * It is very important to have this correctly defined or include * the "-anonymous" command line option for invocation of Lynx * in an anonymous account! If you do not you will be putting * yourself at GREAT security risk! */ #define ANONYMOUS_USER "" /******************************* * In the following four pairs of defines, * INSIDE_DOMAIN means users connecting from inside your local domain, * OUTSIDE_DOMAIN means users connecting from outside your local domain. * * set to FALSE if you don't want users of your anonymous * account to be able to telnet back out */ #define CAN_ANONYMOUS_INSIDE_DOMAIN_TELNET TRUE #define CAN_ANONYMOUS_OUTSIDE_DOMAIN_TELNET FALSE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to use ftp */ #define CAN_ANONYMOUS_INSIDE_DOMAIN_FTP TRUE #define CAN_ANONYMOUS_OUTSIDE_DOMAIN_FTP FALSE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to use rlogin */ #define CAN_ANONYMOUS_INSIDE_DOMAIN_RLOGIN TRUE #define CAN_ANONYMOUS_OUTSIDE_DOMAIN_RLOGIN FALSE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to read news OR post news articles. * These flags apply to "news", "nntp", "newspost", and "newsreply" * URLs, but not to "snews", "snewspost", or "snewsreply" * in case they are supported. */ #define CAN_ANONYMOUS_INSIDE_DOMAIN_READ_NEWS TRUE #define CAN_ANONYMOUS_OUTSIDE_DOMAIN_READ_NEWS FALSE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to goto random URLs. (The 'g' command) */ #define CAN_ANONYMOUS_GOTO TRUE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to goto particular URLs. */ #define CAN_ANONYMOUS_GOTO_BIBP TRUE /* BIBP maps to HTTP */ #define CAN_ANONYMOUS_GOTO_CSO FALSE #define CAN_ANONYMOUS_GOTO_FILE FALSE #define CAN_ANONYMOUS_GOTO_FINGER TRUE #define CAN_ANONYMOUS_GOTO_FTP FALSE #define CAN_ANONYMOUS_GOTO_GOPHER FALSE #define CAN_ANONYMOUS_GOTO_HTTP TRUE #define CAN_ANONYMOUS_GOTO_HTTPS FALSE #define CAN_ANONYMOUS_GOTO_LYNXCGI FALSE #define CAN_ANONYMOUS_GOTO_LYNXEXEC FALSE #define CAN_ANONYMOUS_GOTO_LYNXPROG FALSE #define CAN_ANONYMOUS_GOTO_MAILTO TRUE #define CAN_ANONYMOUS_GOTO_NEWS FALSE #define CAN_ANONYMOUS_GOTO_NNTP FALSE #define CAN_ANONYMOUS_GOTO_RLOGIN FALSE #define CAN_ANONYMOUS_GOTO_SNEWS FALSE #define CAN_ANONYMOUS_GOTO_TELNET FALSE #define CAN_ANONYMOUS_GOTO_TN3270 FALSE #define CAN_ANONYMOUS_GOTO_WAIS TRUE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to specify a port in 'g'oto commands * for telnet URLs. */ #define CAN_ANONYMOUS_GOTO_TELNET_PORT FALSE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to jump to URLs (The 'J' command) * via the shortcut entries in your JUMPFILE. */ #define CAN_ANONYMOUS_JUMP FALSE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to mail */ #define CAN_ANONYMOUS_MAIL TRUE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to print */ #define CAN_ANONYMOUS_PRINT FALSE /******************************* * set to FALSE if users with anonymous restrictions should * not be able to view configuration file (lynx.cfg) info * via special LYNXCFG: links. (This does not control access * to lynx.cfg as a normal file, e.g., through a "file:" URL, * if other restrictions allow that.) */ #define CAN_ANONYMOUS_VIEW_LYNXCFG_INFO FALSE /******************************* * set to FALSE if users with anonymous restrictions should * not be able to view extended configuration file (lynx.cfg) * info @@@ or perform special config info functions (reloading * at run-time) via special LYNXCFG: links @@@. This only applies * if the lynxcfg_info" restriction controlled by the previous * item is not in effect and if Lynx has been compiled without * NO_CONFIG_INFO defined (--disable-config-info wasn't used * if Lynx was built with the autoconf configure script). * The extended info may include details on configuration file * names and location and links for reading the files, as well * as information on nesting of included configuration files. */ #define CAN_ANONYMOUS_VIEW_LYNXCFG_EXTENDED_INFO FALSE /******************************* * set to FALSE if users with anonymous restrictions should * not be able to view information on compile time configuration * via special LYNXCOMPILEOPTS: links. This only applies * if the autoconf configure script was used to build Lynx * AND --disable-config-info wasn't used, otherwise this * special URL scheme isn't recognized anyway. */ #define CAN_ANONYMOUS_VIEW_COMPILEOPTS_INFO FALSE /******************************* * set to FALSE if you don't want users of your anonymous * account to be able to 'g'oto special URLs for showing * configuration info (LYNXCFG: and LYNXCOMPILEOPTS:) if * they are otherwise allowed. */ #define CAN_ANONYMOUS_GOTO_CONFIGINFO FALSE /***************************** * Be sure you have read about and set defines above in Sections * 1, 2 and 3 that could affect Lynx in an anonymous account, * especially LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS. * * This ends the section specific to anonymous accounts. */ #endif /* USERDEFS_H */