/* perlio.h * * Copyright (C) 1996, 1997, 1999, 2000, 2001, 2002, 2003, * 2004, 2005, 2006, 2007, by Larry Wall and others * * You may distribute under the terms of either the GNU General Public * License or the Artistic License, as specified in the README file. * */ #ifndef _PERLIO_H #define _PERLIO_H /* Interface for perl to IO functions. There is a hierarchy of Configure determined #define controls: USE_STDIO - forces PerlIO_xxx() to be #define-d onto stdio functions. This is used for x2p subdirectory and for conservative builds - "just like perl5.00X used to be". This dominates over the others. USE_PERLIO - The primary Configure variable that enables PerlIO. If USE_PERLIO is _NOT_ set then USE_STDIO above will be set to be conservative. If USE_PERLIO is set then there are two modes determined by USE_SFIO: USE_SFIO - If set causes PerlIO_xxx() to be #define-d onto sfio functions. A backward compatability mode for some specialist applications. If USE_SFIO is not set then PerlIO_xxx() are real functions defined in perlio.c which implement extra functionality required for utf8 support. One further note - the table-of-functions scheme controlled by PERL_IMPLICIT_SYS turns on USE_PERLIO so that iperlsys.h can #define PerlIO_xxx() to go via the function table, without having to #undef them from (say) stdio forms. */ #if defined(PERL_IMPLICIT_SYS) #ifndef USE_PERLIO #ifndef NETWARE /* # define USE_PERLIO */ #endif #endif #endif #ifndef USE_PERLIO # define USE_STDIO #endif #ifdef USE_STDIO # ifndef PERLIO_IS_STDIO # define PERLIO_IS_STDIO # endif #endif /* -------------------- End of Configure controls ---------------------------- */ /* * Although we may not want stdio to be used including <stdio.h> here * avoids issues where stdio.h has strange side effects */ #include <stdio.h> #ifdef __BEOS__ int fseeko(FILE *stream, off_t offset, int whence); off_t ftello(FILE *stream); #endif #if defined(USE_64_BIT_STDIO) && defined(HAS_FTELLO) && !defined(USE_FTELL64) #define ftell ftello #endif #if defined(USE_64_BIT_STDIO) && defined(HAS_FSEEKO) && !defined(USE_FSEEK64) #define fseek fseeko #endif /* BS2000 includes are sometimes a bit non standard :-( */ #if defined(POSIX_BC) && defined(O_BINARY) && !defined(O_TEXT) #undef O_BINARY #endif #ifdef PERLIO_IS_STDIO /* #define PerlIO_xxxx() as equivalent stdio function */ #include "perlsdio.h" #else /* PERLIO_IS_STDIO */ #ifdef USE_SFIO /* #define PerlIO_xxxx() as equivalent sfio function */ #include "perlsfio.h" #endif /* USE_SFIO */ #endif /* PERLIO_IS_STDIO */ #ifndef PerlIO /* ----------- PerlIO implementation ---------- */ /* PerlIO not #define-d to something else - define the implementation */ typedef struct _PerlIO PerlIOl; typedef struct _PerlIO_funcs PerlIO_funcs; typedef PerlIOl *PerlIO; #define PerlIO PerlIO #define PERLIO_LAYERS 1 /* Making the big PerlIO_funcs vtables const is good (enables placing * them in the const section which is good for speed, security, and * embeddability) but this cannot be done by default because of * backward compatibility. */ #ifdef PERLIO_FUNCS_CONST #define PERLIO_FUNCS_DECL(funcs) const PerlIO_funcs funcs #define PERLIO_FUNCS_CAST(funcs) (PerlIO_funcs*)(funcs) #else #define PERLIO_FUNCS_DECL(funcs) PerlIO_funcs funcs #define PERLIO_FUNCS_CAST(funcs) (funcs) #endif PERL_EXPORT_C void PerlIO_define_layer(pTHX_ PerlIO_funcs *tab); PERL_EXPORT_C PerlIO_funcs *PerlIO_find_layer(pTHX_ const char *name, STRLEN len, int load); PERL_EXPORT_C PerlIO *PerlIO_push(pTHX_ PerlIO *f, PERLIO_FUNCS_DECL(*tab), const char *mode, SV *arg); PERL_EXPORT_C void PerlIO_pop(pTHX_ PerlIO *f); PERL_EXPORT_C AV* PerlIO_get_layers(pTHX_ PerlIO *f); PERL_EXPORT_C void PerlIO_clone(pTHX_ PerlInterpreter *proto, CLONE_PARAMS *param); #endif /* PerlIO */ /* ----------- End of implementation choices ---------- */ #ifndef PERLIO_IS_STDIO /* Not using stdio _directly_ as PerlIO */ /* We now need to determine what happens if source trys to use stdio. * There are three cases based on PERLIO_NOT_STDIO which XS code * can set how it wants. */ #ifdef PERL_CORE /* Make a choice for perl core code - currently this is set to try and catch lingering raw stdio calls. This is a known issue with some non UNIX ports which still use "native" stdio features. */ #ifndef PERLIO_NOT_STDIO #define PERLIO_NOT_STDIO 1 #endif #else #ifndef PERLIO_NOT_STDIO #define PERLIO_NOT_STDIO 0 #endif #endif #ifdef PERLIO_NOT_STDIO #if PERLIO_NOT_STDIO /* * PERLIO_NOT_STDIO #define'd as 1 * Case 1: Strong denial of stdio - make all stdio calls (we can think of) errors */ #include "nostdio.h" #else /* if PERLIO_NOT_STDIO */ /* * PERLIO_NOT_STDIO #define'd as 0 * Case 2: Declares that both PerlIO and stdio can be used */ #endif /* if PERLIO_NOT_STDIO */ #else /* ifdef PERLIO_NOT_STDIO */ /* * PERLIO_NOT_STDIO not defined * Case 3: Try and fake stdio calls as PerlIO calls */ #include "fakesdio.h" #endif /* ifndef PERLIO_NOT_STDIO */ #endif /* PERLIO_IS_STDIO */ /* ----------- fill in things that have not got #define'd ---------- */ #ifndef Fpos_t #define Fpos_t Off_t #endif #ifndef EOF #define EOF (-1) #endif /* This is to catch case with no stdio */ #ifndef BUFSIZ #define BUFSIZ 1024 #endif #ifndef SEEK_SET #define SEEK_SET 0 #endif #ifndef SEEK_CUR #define SEEK_CUR 1 #endif #ifndef SEEK_END #define SEEK_END 2 #endif #define PERLIO_DUP_CLONE 1 #define PERLIO_DUP_FD 2 /* --------------------- Now prototypes for functions --------------- */ START_EXTERN_C #ifndef __attribute__format__ # ifdef HASATTRIBUTE_FORMAT # define __attribute__format__(x,y,z) __attribute__((format(x,y,z))) # else # define __attribute__format__(x,y,z) # endif #endif #ifndef PerlIO_init PERL_EXPORT_C void PerlIO_init(pTHX); #endif #ifndef PerlIO_stdoutf PERL_EXPORT_C int PerlIO_stdoutf(const char *, ...) __attribute__format__(__printf__, 1, 2); #endif #ifndef PerlIO_puts PERL_EXPORT_C int PerlIO_puts(PerlIO *, const char *); #endif #ifndef PerlIO_open PERL_EXPORT_C PerlIO *PerlIO_open(const char *, const char *); #endif #ifndef PerlIO_openn PERL_EXPORT_C PerlIO *PerlIO_openn(pTHX_ const char *layers, const char *mode, int fd, int imode, int perm, PerlIO *old, int narg, SV **arg); #endif #ifndef PerlIO_eof PERL_EXPORT_C int PerlIO_eof(PerlIO *); #endif #ifndef PerlIO_error PERL_EXPORT_C int PerlIO_error(PerlIO *); #endif #ifndef PerlIO_clearerr PERL_EXPORT_C void PerlIO_clearerr(PerlIO *); #endif #ifndef PerlIO_getc PERL_EXPORT_C int PerlIO_getc(PerlIO *); #endif #ifndef PerlIO_putc PERL_EXPORT_C int PerlIO_putc(PerlIO *, int); #endif #ifndef PerlIO_ungetc PERL_EXPORT_C int PerlIO_ungetc(PerlIO *, int); #endif #ifndef PerlIO_fdopen PERL_EXPORT_C PerlIO *PerlIO_fdopen(int, const char *); #endif #ifndef PerlIO_importFILE PERL_EXPORT_C PerlIO *PerlIO_importFILE(FILE *, const char *); #endif #ifndef PerlIO_exportFILE PERL_EXPORT_C FILE *PerlIO_exportFILE(PerlIO *, const char *); #endif #ifndef PerlIO_findFILE PERL_EXPORT_C FILE *PerlIO_findFILE(PerlIO *); #endif #ifndef PerlIO_releaseFILE PERL_EXPORT_C void PerlIO_releaseFILE(PerlIO *, FILE *); #endif #ifndef PerlIO_read PERL_EXPORT_C SSize_t PerlIO_read(PerlIO *, void *, Size_t); #endif #ifndef PerlIO_unread PERL_EXPORT_C SSize_t PerlIO_unread(PerlIO *, const void *, Size_t); #endif #ifndef PerlIO_write PERL_EXPORT_C SSize_t PerlIO_write(PerlIO *, const void *, Size_t); #endif #ifndef PerlIO_setlinebuf PERL_EXPORT_C void PerlIO_setlinebuf(PerlIO *); #endif #ifndef PerlIO_printf PERL_EXPORT_C int PerlIO_printf(PerlIO *, const char *, ...) __attribute__format__(__printf__, 2, 3); #endif #ifndef PerlIO_sprintf PERL_EXPORT_C int PerlIO_sprintf(char *, int, const char *, ...) __attribute__format__(__printf__, 3, 4); #endif #ifndef PerlIO_vprintf PERL_EXPORT_C int PerlIO_vprintf(PerlIO *, const char *, va_list); #endif #ifndef PerlIO_tell PERL_EXPORT_C Off_t PerlIO_tell(PerlIO *); #endif #ifndef PerlIO_seek PERL_EXPORT_C int PerlIO_seek(PerlIO *, Off_t, int); #endif #ifndef PerlIO_rewind PERL_EXPORT_C void PerlIO_rewind(PerlIO *); #endif #ifndef PerlIO_has_base PERL_EXPORT_C int PerlIO_has_base(PerlIO *); #endif #ifndef PerlIO_has_cntptr PERL_EXPORT_C int PerlIO_has_cntptr(PerlIO *); #endif #ifndef PerlIO_fast_gets PERL_EXPORT_C int PerlIO_fast_gets(PerlIO *); #endif #ifndef PerlIO_canset_cnt PERL_EXPORT_C int PerlIO_canset_cnt(PerlIO *); #endif #ifndef PerlIO_get_ptr PERL_EXPORT_C STDCHAR *PerlIO_get_ptr(PerlIO *); #endif #ifndef PerlIO_get_cnt PERL_EXPORT_C int PerlIO_get_cnt(PerlIO *); #endif #ifndef PerlIO_set_cnt PERL_EXPORT_C void PerlIO_set_cnt(PerlIO *, int); #endif #ifndef PerlIO_set_ptrcnt PERL_EXPORT_C void PerlIO_set_ptrcnt(PerlIO *, STDCHAR *, int); #endif #ifndef PerlIO_get_base PERL_EXPORT_C STDCHAR *PerlIO_get_base(PerlIO *); #endif #ifndef PerlIO_get_bufsiz PERL_EXPORT_C int PerlIO_get_bufsiz(PerlIO *); #endif #ifndef PerlIO_tmpfile PERL_EXPORT_C PerlIO *PerlIO_tmpfile(void); #endif #ifndef PerlIO_stdin PERL_EXPORT_C PerlIO *PerlIO_stdin(void); #endif #ifndef PerlIO_stdout PERL_EXPORT_C PerlIO *PerlIO_stdout(void); #endif #ifndef PerlIO_stderr PERL_EXPORT_C PerlIO *PerlIO_stderr(void); #endif #ifndef PerlIO_getpos PERL_EXPORT_C int PerlIO_getpos(PerlIO *, SV *); #endif #ifndef PerlIO_setpos PERL_EXPORT_C int PerlIO_setpos(PerlIO *, SV *); #endif #ifndef PerlIO_fdupopen PERL_EXPORT_C PerlIO *PerlIO_fdupopen(pTHX_ PerlIO *, CLONE_PARAMS *, int); #endif #if !defined(PerlIO_modestr) && !defined(PERLIO_IS_STDIO) PERL_EXPORT_C char *PerlIO_modestr(PerlIO *, char *buf); #endif #ifndef PerlIO_isutf8 PERL_EXPORT_C int PerlIO_isutf8(PerlIO *); #endif #ifndef PerlIO_apply_layers PERL_EXPORT_C int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode, const char *names); #endif #ifndef PerlIO_binmode PERL_EXPORT_C int PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int omode, const char *names); #endif #ifndef PerlIO_getname PERL_EXPORT_C char *PerlIO_getname(PerlIO *, char *); #endif PERL_EXPORT_C void PerlIO_destruct(pTHX); PERL_EXPORT_C int PerlIO_intmode2str(int rawmode, char *mode, int *writing); #ifdef PERLIO_LAYERS PERL_EXPORT_C void PerlIO_cleanup(pTHX); PERL_EXPORT_C void PerlIO_debug(const char *fmt, ...) __attribute__format__(__printf__, 1, 2); typedef struct PerlIO_list_s PerlIO_list_t; #endif END_EXTERN_C #endif /* _PERLIO_H */ /* * Local variables: * c-indentation-style: bsd * c-basic-offset: 4 * indent-tabs-mode: t * End: * * ex: set ts=8 sts=4 sw=4 noet: */