# Makefile for Texinfo distribution.
# $Id: Makefile.in,v 1.4 1996/12/15 22:21:02 downsj Exp $
# 
# Copyright (C) 1993, 96 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

#### Start of system configuration section. ####

srcdir = @srcdir@
VPATH  = $(srcdir):$(common)

common = $(srcdir)/libtxi

CC = @CC@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

LN	= ln
RM	= rm -f
TAR	= tar
MKDIR	= mkdir

DEFS = @DEFS@
LIBS = @LIBS@
LOADLIBES = $(LIBS)

ALLOCA = @ALLOCA@

SHELL = /bin/sh

CFLAGS = @CFLAGS@
LDFLAGS = @LDFLAGS@

prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = $(exec_prefix)/bin
# Prefix for each installed program, normally empty or `g'.
binprefix = 
# Prefix for each installed man page, normally empty or `g'.
manprefix = 
manext = 1
mandir = $(prefix)/man/man$(manext)
infodir = $(prefix)/info

# For info program. 
DEFAULT_INFOPATH = $(infodir):.

#### End of system configuration section. ####

VERSION = 3.9
DISTNAME = texinfo-$(VERSION)

# Subdirectories that have makefiles
SUBDIRS = libtxi makeinfo info util emacs

# All subdirectories that go into a distribution
ALL_SUBDIRS = $(SUBDIRS) makeinfo/macros

MDEFINES = bindir='$(bindir)' mandir='$(mandir)' manext='$(manext)' \
	prefix='$(prefix)' binprefix='$(binprefix)' \
	manprefix='$(manprefix)' infodir='$(infodir)' CFLAGS='$(CFLAGS)' \
	CC='$(CC)' ALLOCA='$(ALLOCA)' LDFLAGS='$(LDFLAGS)' \
	DEFAULT_INFOPATH='$(DEFAULT_INFOPATH)' INSTALL_MAN='$(INSTALL_MAN)'

all: sub-all texinfo

install: all installdirs
	test -f $(infodir)/dir || $(INSTALL_DATA) $(srcdir)/dir $(infodir)  
	for dir in $(SUBDIRS); do \
	   echo making $@ in $$dir; \
	   (cd $$dir && $(MAKE) $(MDEFINES) $@ || exit 1); \
	done
	d=$(srcdir); test -f ./texinfo && d=.; \
	(cd $$d && for f in texinfo texinfo-* ; do \
	    $(INSTALL_DATA) $$f $(infodir)/$$f; done)
	$(POST_INSTALL)
	./util/install-info --info-dir=$(infodir) $(infodir)/texinfo
	@echo Please install $(srcdir)/texinfo.tex manually.

installdirs:
	-$(SHELL) $(srcdir)/util/mkinstalldirs $(bindir) $(datadir) $(infodir) $(mandir)

uninstall:
	for dir in $(SUBDIRS); do \
	  echo making $@ in $$dir; \
	  (cd $$dir && $(MAKE) $(MDEFINES) $@ || exit 1); \
	done
	$(RM) $(infodir)/texinfo $(infodir)/texinfo-*

Makefile: Makefile.in config.status
	$(SHELL) ./config.status

config.status: configure
	$(SHELL) ./config.status --recheck

configure: configure.in
	cd $(srcdir) && autoconf

sub-all TAGS:
	for dir in $(SUBDIRS); do \
	  echo making $@ in $$dir; \
	  (cd $$dir && $(MAKE) $(MDEFINES) $@ || exit 1); \
	done
.PHONY: sub-all

clean mostlyclean:
	for dir in $(SUBDIRS); do \
	  echo making $@ in $$dir; \
	  (cd $$dir && $(MAKE) $(MDEFINES) $@ || exit 1); \
	done

distclean: clean texclean
	for dir in $(SUBDIRS); do \
	  echo making $@ in $$dir; \
	  (cd $$dir && $(MAKE) $(MDEFINES) $@ || exit 1); \
	done
	$(RM) Makefile *.status *.cache *.log texinfo texinfo-?	texinfo-??

texclean:
	$(RM) *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.pg *.pgs
	$(RM) *.toc *.tp *.tps *.vr *.vrs

realclean: distclean

info texinfo: makeinfo/makeinfo texinfo.texi
	./makeinfo/makeinfo -I$(srcdir) texinfo.texi
.PHONY: info

makeinfo/makeinfo: sub-all

dvi texinfo.dvi:
	PATH="$(srcdir)/util:$${PATH}" TEXINPUTS="$(srcdir):$(common):$${TEXINPUTS}" texi2dvi $(srcdir)/texinfo.texi
.PHONY: dvi

dist: DISTFILES
	$(RM) -r $(DISTNAME)
	$(MKDIR) $(DISTNAME)
	for d in `find . -type d ! -name RCS -print`; do \
	  d=`echo $$d | grep -v '[@=]'`; \
	  test -z "$$d" || test "$$d" = . || test "$$d" = "./$(DISTNAME)" \
	  || mkdir $(DISTNAME)/$$d; done
	for f in `cat DISTFILES`; do \
	   $(LN) $(srcdir)/$$f $(DISTNAME)/$$f || \
		{ echo copying $$f; cp -p $(srcdir)/$$f $(DISTNAME)/$$f ; } \
	done
	(cd $(DISTNAME); $(MAKE) $(MFLAGS) distclean)
	$(TAR) chvf - $(DISTNAME) | gzip >$(DISTNAME).tar.gz
	$(RM) -r $(DISTNAME)

# Gets rid of most of the unwanted files.  Verify manually (if necessary)
# that this produces a list of all the files desired in the distribution. 
DISTFILES: force
	(cd $(srcdir); find . ! -type d -print) \
	| sed '/\/RCS\//d; \
	       /\/EMACS-BACKUPS\//d; \
	       /\.tar.*/d; \
	       /~$$/d; /\.o$$/d; \
	       /\.gdbinit$$/d; \
	       /\.orig$$/d; \
	       /\#$$/d; \
	       /\/info\/info$$/d; \
	       /\.info$$/d; \
	       /\.elc/d; \
	       /\/makeinfo\/makeinfo$$/d; \
	       /\/$(DISTNAME)\/.*$$/d; \
	       /\/util\/texindex$$/d; \
	       /texinfo$$/d; \
	       /texinfo-[0-9]+$$/d; \
	       /\/.*\.BAK$$/d; \
	       /\/.*\.a$$/d; \
	       /\/core$$/d; \
	       /\/*\.core$$/d; \
	       /\/core\..*$$/d; \
	       /\/a.out$$/d; \
	       /\/[=@]/d; \
	       /\/conftest\.c$$/d; \
	       /\/DISTFILES$$/d; \
	       /\/foo$$/d; \
	       /\/bar$$/d; \
	       /\.toc$$/d; \
	       /\.bak$$/d; \
	       /\.aux$$/d; /\.log$$/d; \
	       /\.cps$$/d; /\.cp$$/d; \
	       /\.fns$$/d; /\.fn$$/d; \
	       /\.tps$$/d; /\.tp$$/d; \
	       /\.vrs$$/d; /\.vr$$/d; \
	       /\.pgs$$/d; /\.pg$$/d; \
	       /\.kys$$/d; /\.ky$$/d; \
	       /\.ops$$/d; /\.op$$/d; \
	       s/^.\///; /^\.$$/d;' \
	| sort | uniq > DISTFILES

force:

# Prevent GNU make v3 from overflowing arg limit on SysV.
.NOEXPORT: