# Makefile.in generated by automake 1.6 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# $Id: Makefile.in,v 1.6 2002/06/15 23:36:40 espie Exp $
# Makefile.am for texinfo/doc.
# Run automake in .. to produce Makefile.in from this.
#
# This file is free software; as a special exception the author gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AWK = @AWK@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
DATADIRNAME = @DATADIRNAME@
DEPDIR = @DEPDIR@
GENCAT = @GENCAT@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
HAVE_LIB = @HAVE_LIB@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
LIB = @LIB@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LTLIB = @LTLIB@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
MKINSTALLDIRS = @MKINSTALLDIRS@
PACKAGE = @PACKAGE@
POSUB = @POSUB@
RANLIB = @RANLIB@
STRIP = @STRIP@
TERMLIBS = @TERMLIBS@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@

# Put texinfo.txi first because that's the most important.
info_TEXINFOS = texinfo.txi info-stnd.texi info.texi
DISTCLEANFILES = texinfo texinfo-* info*.info*

man_MANS = info.1 install-info.1 makeinfo.1 texindex.1 texi2dvi.1 \
           info.5 texinfo.5

HELP2MAN = help2man
noinst_SCRIPTS = $(HELP2MAN)

# Use the programs built in our distribution.
MAKEINFO = ../makeinfo/makeinfo
INSTALL_INFO = ../util/install-info

TXI_XLATE = txi-cs.tex txi-de.tex txi-en.tex txi-es.tex txi-fr.tex \
	    txi-nl.tex txi-no.tex txi-pt.tex


# Include our texinfo.tex, not Automake's.
EXTRA_DIST = epsf.tex pdfcolor.tex texinfo.tex \
             fdl.texi macro.texi userdoc.texi \
	     $(man_MANS) $(noinst_SCRIPTS) $(TXI_XLATE)


texmf_texinfo = $(TEXMF)/tex/texinfo
texmf_dvips = $(TEXMF)/tex/generic/dvips
texmf_pdftex_misc = $(TEXMF)/pdftex/plain/misc
subdir = doc
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SCRIPTS = $(noinst_SCRIPTS)

DIST_SOURCES =
INFO_DEPS = texinfo info-stnd.info info.info
DVIS = texinfo.dvi info-stnd.dvi info.dvi
TEXINFOS = texinfo.txi info-stnd.texi info.texi

NROFF = nroff
MANS = $(man_MANS)
DIST_COMMON = README $(info_TEXINFOS) Makefile.am Makefile.in mdate-sh \
	stamp-1 stamp-vti texinfo.tex version-stnd.texi version.texi
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .info .ps .texi .txi
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

$(srcdir)/version.texi:  #$(srcdir)/stamp-vti
	@:
$(srcdir)/stamp-vti: texinfo.txi $(top_srcdir)/configure.ac
	@(set `$(SHELL) $(srcdir)/mdate-sh $(srcdir)/texinfo.txi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi

texinfo: texinfo.txi $(srcdir)/version.texi
texinfo.dvi: texinfo.txi $(srcdir)/version.texi

$(srcdir)/version-stnd.texi:  #$(srcdir)/stamp-1
	@:
$(srcdir)/stamp-1: info-stnd.texi $(top_srcdir)/configure.ac
	@(set `$(SHELL) $(srcdir)/mdate-sh $(srcdir)/info-stnd.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > 1.tmp
	@cmp -s 1.tmp $(srcdir)/version-stnd.texi \
	  || (echo "Updating $(srcdir)/version-stnd.texi"; \
	      cp 1.tmp $(srcdir)/version-stnd.texi)
	-@rm -f 1.tmp
	@cp $(srcdir)/version-stnd.texi $@

mostlyclean-1:
	-rm -f 1.tmp

maintainer-clean-1:
	-rm -f $(srcdir)/stamp-1 $(srcdir)/version-stnd.texi

info-stnd.info: info-stnd.texi $(srcdir)/version-stnd.texi
info-stnd.dvi: info-stnd.texi $(srcdir)/version-stnd.texi

info.info: info.texi $(info_TEXINFOS)
info.dvi: info.texi $(info_TEXINFOS)

.texi.dvi:
	TEXINPUTS="$(srcdir)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texi:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
	       `echo $< | sed 's,.*/,,'`

.txi.info:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
	       `echo $< | sed 's,.*/,,'`

.txi.dvi:
	TEXINPUTS="$(srcdir)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.txi:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
	       `echo $< | sed 's,.*/,,'`
TEXI2DVI = texi2dvi
DVIPS = dvips
.dvi.ps:
	$(DVIPS) $< -o $@

install-info: install-info-am
install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  d=.; \
	  for ifile in echo $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9]; do \
	    if test -f $$ifile; then \
	      relfile=`expr "$$ifile" : "$$d/\(.*\)"`; \
	      echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
	      $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info-am:
	$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file"; \
	    install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (if cd $(DESTDIR)$(infodir); then \
	     echo " rm -f $$file $$file-[0-9] $$file-[0-9][0-9])"; \
	     rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
	   else :; fi); \
	done

mostlyclean-aminfo:
	-rm -f texinfo.aux texinfo.cp texinfo.cps texinfo.dvi texinfo.fn texinfo.fns \
	  texinfo.ky texinfo.log texinfo.op texinfo.pg texinfo.ps \
	  texinfo.toc texinfo.tp texinfo.vr info-stnd.aux info-stnd.cp \
	  info-stnd.cps info-stnd.dvi info-stnd.fn info-stnd.ky \
	  info-stnd.log info-stnd.pg info-stnd.ps info-stnd.toc \
	  info-stnd.tp info-stnd.vr info.aux info.cp info.cps info.dvi \
	  info.fn info.ky info.log info.pg info.ps info.toc info.tp \
	  info.vr

maintainer-clean-aminfo:
	cd $(srcdir) && \
	for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done

man1dir = $(mandir)/man1
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done

man5dir = $(mandir)/man5
install-man5: $(man5_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man5dir)
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst; \
	done
uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man5dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man5dir)/$$inst; \
	done
tags: TAGS
TAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    cp -pR $$d/$$file $(distdir)$$dir \
	    || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="${top_distdir}" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(SCRIPTS) $(MANS)

installdirs:
	$(mkinstalldirs) $(DESTDIR)$(infodir) $(DESTDIR)$(man1dir) $(DESTDIR)$(man5dir)

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-data-local install-info-am #install-man

install-exec-am:

install-man: install-man1 install-man5

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-1 \
	maintainer-clean-aminfo maintainer-clean-generic \
	maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-1 mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-vti

uninstall-am: uninstall-info-am uninstall-man

uninstall-man: uninstall-man1 uninstall-man5

.PHONY: all all-am check check-am clean clean-generic dist-info \
	distclean distclean-generic distdir dvi dvi-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-exec install-exec-am install-info-am \
	install-man install-man1 install-man5 install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-1 maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti mostlyclean \
	mostlyclean-1 mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-vti uninstall uninstall-am uninstall-info-am \
	uninstall-man uninstall-man1 uninstall-man5


install-data-local:
	@echo
	@echo "WARNING: You must install texinfo.tex and txi-??.tex manually,"
	@echo "         perhaps in TEXMF/tex/texinfo/,"
	@echo "         where TEXMF is a root of your TeX tree."
	@echo "         See doc/README for some considerations."
	@echo "         You can run make TEXMF=/your/texmf install-tex to do this."
	@echo
	@echo "         You may also need to install epsf.tex and (if you"
	@echo "         use pdftex) pdfcolor.tex in TEXMF/tex/generic/dvips"
	@echo "         and TEXMF/pdftex/plain/misc/pdfcolor.tex respectively,"
	@echo "         if your TeX installation did not include them."
install-tex:
	test -n "$(TEXMF)" || (echo "TEXMF must be set." >&2; exit 1)
	$(mkinstalldirs) $(DESTDIR)$(texmf_texinfo) $(DESTDIR)$(texmf_dvips) $(DESTDIR)$(texmf_pdftex_misc)
	$(INSTALL_DATA) $(srcdir)/texinfo.tex $(DESTDIR)$(texmf_texinfo)/texinfo.tex
	$(INSTALL_DATA) $(srcdir)/epsf.tex $(DESTDIR)$(texmf_dvips)/epsf.tex
	$(INSTALL_DATA) $(srcdir)/pdfcolor.tex $(DESTDIR)$(texmf_pdftex_misc)/pdfcolor.tex
	for f in $(TXI_XLATE); do \
	  $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(texmf_texinfo)/$$f; done

# Don't want to run help2man at every installation.
@TEXINFO_MAINT_TRUE@info.1: ../info/ginfo $(HELP2MAN)
@TEXINFO_MAINT_TRUE@	$(HELP2MAN) --name="read Info documents" $< >$@
@TEXINFO_MAINT_TRUE@install-info.1: $(INSTALL_INFO) $(HELP2MAN)
@TEXINFO_MAINT_TRUE@	$(HELP2MAN) --name="update info/dir entries" $< >$@
@TEXINFO_MAINT_TRUE@makeinfo.1: $(MAKEINFO) $(HELP2MAN)
@TEXINFO_MAINT_TRUE@	$(HELP2MAN) --name="translate Texinfo documents" $< >$@
@TEXINFO_MAINT_TRUE@texi2dvi.1: ../util/texi2dvi $(HELP2MAN)
@TEXINFO_MAINT_TRUE@	$(HELP2MAN) --name="print Texinfo documents" $< >$@
@TEXINFO_MAINT_TRUE@texindex.1: ../util/texindex $(HELP2MAN)
@TEXINFO_MAINT_TRUE@	$(HELP2MAN) --name="sort Texinfo index files" $< >$@

# Do not create info files for distribution, but do create man pages.
dist-info:

# Do not try to build the info files in $(srcdir),
# since we don't distribute them.
.texi.info:
	$(MAKEINFO) -I$(srcdir) `echo $< | sed 's,.*/,,'`
texinfo: $(srcdir)/texinfo.txi
	$(MAKEINFO) -I$(srcdir) texinfo.txi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: