.\" Copyright (c) 1980, 1991 The Regents of the University of California.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by the University of
.\"	California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	$OpenBSD: sigvec.3,v 1.20 2002/09/18 07:33:47 deraadt Exp $
.\"
.Dd April 29, 1991
.Dt SIGVEC 3
.Os
.Sh NAME
.Nm sigvec
.Nd software signal facilities
.Sh SYNOPSIS
.Fd #include <signal.h>
.Pp
.Bd -literal
struct sigvec {
	void	 (*sv_handler)();
	int	 sv_mask;
	int      sv_flags;
};
.Ed
.Ft int
.Fn sigvec "int sig" "struct sigvec *vec" "struct sigvec *ovec"
.Sh DESCRIPTION
.Bf -symbolic
This interface is made obsolete by
.Xr sigaction 2 .
.Ef
.Pp
The system defines a set of signals that may be delivered to a process.
Signal delivery resembles the occurrence of a hardware interrupt:
the signal is blocked from further occurrence, the current process
context is saved, and a new one is built.
A process may specify a
.Em handler
to which a signal is delivered, or specify that a signal is to be
.Em blocked
or
.Em ignored .
A process may also specify that a default action is to be taken
by the system when a signal occurs.
A signal may also be
.Em blocked ,
in which case its delivery is postponed until it is
.Em unblocked .
The action to be taken on delivery is determined at the time
of delivery.
Normally, signal handlers execute on the current stack
of the process.
This may be changed, on a per-handler basis,
so that signals are taken on a special
.Em "signal stack" .
.Pp
All signals have the same
.Em priority .
Signal routines execute with the signal that caused their
invocation
.Em blocked ,
but other signals may yet occur.
A global
.Em "signal mask"
defines the set of signals currently blocked from delivery
to a process.
The signal mask for a process is initialized
from that of its parent (normally 0).
It may be changed with a
.Xr sigblock 3
or
.Xr sigsetmask 3
call, or when a signal is delivered to the process.
.Pp
When a signal
condition arises for a process, the signal is added to a set of
signals pending for the process.
If the signal is not currently
.Em blocked
by the process then it is delivered to the process.
When a caught signal
is delivered, the current state of the process is saved,
a new signal mask is calculated (as described below),
and the signal handler is invoked.
The call to the handler
is arranged so that if the signal handling routine returns
normally the process will resume execution in the context
from before the signal's delivery.
If the process wishes to resume in a different context, then it
must arrange to restore the previous context itself.
.Pp
When a signal is delivered to a process a new signal mask is
installed for the duration of the process' signal handler
(or until a
.Xr sigblock
or
.Xr sigsetmask
call is made).
This mask is formed by taking the union of the current signal mask,
the signal to be delivered, and
the signal mask associated with the handler to be invoked.
.Pp
.Fn sigvec
assigns a handler for a specific signal.
If
.Fa vec
is non-zero, it
specifies an action
.Pf ( Dv SIG_DFL ,
.Dv SIG_IGN ,
or a handler routine) and mask
to be used when delivering the specified signal.
If
.Fa ovec
is non-zero, the previous handling information for the signal
is returned to the user.
.Pp
Once a signal handler is installed, it remains installed
until another
.Fn sigvec
call is made, or an
.Xr execve 2
is performed.
A signal-specific default action may be reset by
setting
.Fa sv_handler
to
.Dv SIG_DFL .
The defaults are process termination, possibly with core dump;
no action; stopping the process; or continuing the process.
See the signal list below for each signal's default action.
If
.Fa sv_handler
is set to
.Dv SIG_IGN ,
the default action for the signal is to discard the signal,
and if a signal is pending,
the pending signal is discarded even if the signal is masked.
If
.Fa sv_handler
is set to
.Dv SIG_IGN ,
current and pending instances
of the signal are ignored and discarded.
.Pp
Options may be specified by setting
.Em sv_flags .
If the
.Dv SV_ONSTACK
bit is set in
.Fa sv_flags ,
the system will deliver the signal to the process on a
.Em "signal stack" ,
specified with
.Xr sigstack 2 .
.Pp
If a signal is caught during the system calls listed below,
the call may be restarted,
the call may return with a data transfer shorter than requested,
or the call may forced to terminate
with the error
.Er EINTR .
Interrupting of pending calls is requested
by setting the
.Dv SV_INTERRUPT
bit in
.Ar sv_flags .
The affected system calls include
.Xr open 2 ,
.Xr read 2 ,
.Xr write 2 ,
.Xr sendto 2 ,
.Xr recvfrom 2 ,
.Xr sendmsg 2
and
.Xr recvmsg 2
on a communications channel or a slow device (such as a terminal,
but not a regular file)
and during a
.Xr wait 2
or
.Xr ioctl 2 .
However, calls that have already committed are not restarted,
but instead return a partial success (for example, a short read count).
.Pp
After a
.Xr fork 2
or
.Xr vfork 2
all signals, the signal mask, the signal stack,
and the interrupt/restart flags are inherited by the child.
.Pp
.Xr execve 2
reinstates the default
action for all signals which were caught and
resets all signals to be caught on the user stack.
Ignored signals remain ignored;
the signal mask remains the same;
signals that interrupt pending system calls continue to do so.
.Pp
The following is a list of all signals
with names as in the include file
.Aq Pa signal.h :
.Bl -column SIGVTALARMXX "create core imagexxx"
.It Sy "  NAME  " "	Default Action  " "	Description"
.It Dv SIGHUP No "	terminate process" "	terminal line hangup"
.It Dv SIGINT No "	terminate process" "	interrupt program"
.It Dv SIGQUIT No "	create core image" "	quit program"
.It Dv SIGILL No "	create core image" "	illegal instruction"
.It Dv SIGTRAP No "	create core image" "	trace trap"
.It Dv SIGABRT No "	create core image" Xr 	abort 3
call (formerly
.Dv SIGIOT )
.It Dv SIGEMT No "	create core image" "	emulate instruction executed"
.It Dv SIGFPE No "	create core image" "	floating-point exception"
.It Dv SIGKILL No "	terminate process" "	kill program (cannot be caught or ignored)"
.It Dv SIGBUS No "	create core image" "	bus error"
.It Dv SIGSEGV No "	create core image" "	segmentation violation"
.It Dv SIGSYS No "	create core image" "	system call given invalid argument"
.It Dv SIGPIPE No "	terminate process" "	write on a pipe with no reader"
.It Dv SIGALRM No "	terminate process" "	real-time timer expired"
.It Dv SIGTERM No "	terminate process" "	software termination signal"
.It Dv SIGURG No "	discard signal" "	urgent condition present on socket"
.It Dv SIGSTOP No "	stop process" "	stop (cannot be caught or ignored)"
.It Dv SIGTSTP No "	stop process" "	stop signal generated from keyboard"
.It Dv SIGCONT No "	discard signal" "	continue after stop"
.It Dv SIGCHLD No "	discard signal" "	child status has changed"
.It Dv SIGTTIN No "	stop process" "	background read attempted from control terminal"
.It Dv SIGTTOU No "	stop process" "	background write attempted to control terminal"
.It Dv SIGIO No "	discard signal" Tn "	I/O"
is possible on a descriptor (see
.Xr fcntl 2 )
.It Dv SIGXCPU No "	terminate process" "	cpu time limit exceeded (see"
.Xr setrlimit 2 )
.It Dv SIGXFSZ No "	terminate process" "	file size limit exceeded (see"
.Xr setrlimit 2 )
.It Dv SIGVTALRM No "	terminate process" "	virtual time alarm (see"
.Xr setitimer 2 )
.It Dv SIGPROF No "	terminate process" "	profiling timer alarm (see"
.Xr setitimer 2 )
.It Dv SIGWINCH No "	discard signal" "	window size change"
.It Dv SIGINFO No "	discard signal" "	status request from keyboard"
.It Dv SIGUSR1 No "	terminate process" "	user-defined signal 1"
.It Dv SIGUSR2 No "	terminate process" "	user-defined signal 2"
.El
.Sh NOTES
The mask specified in
.Fa vec
is not allowed to block
.Dv SIGKILL
or
.Dv SIGSTOP .
This is enforced silently by the system.
.Pp
The
.Dv SV_INTERRUPT
flag is not available in
.Bx 4.2 ,
hence it should not be used if backward compatibility is needed.
.Sh RETURN VALUES
A 0 value indicated that the call succeeded.
A \-1 return value indicates an error occurred and
.Va errno
is set to indicated the reason.
.Sh ERRORS
.Fn sigvec
will fail and no new signal handler will be installed if one
of the following occurs:
.Bl -tag -width Er
.It Bq Er EFAULT
Either
.Fa vec
or
.Fa ovec
points to memory that is not a valid part of the process
address space.
.It Bq Er EINVAL
.Fa sig
is not a valid signal number.
.It Bq Er EINVAL
An attempt is made to ignore or supply a handler for
.Dv SIGKILL
or
.Dv SIGSTOP .
.El
.Sh EXAMPLES
For an example of signal handler declarations, see
.Xr sigaction 2 .
.Sh SEE ALSO
.Xr kill 1 ,
.Xr kill 2 ,
.Xr ptrace 2 ,
.Xr sigaction 2 ,
.Xr sigaltstack 2 ,
.Xr sigpause 3 ,
.Xr sigprocmask 2 ,
.Xr sigstack 2 ,
.Xr sigsuspend 2 ,
.Xr setjmp 3 ,
.Xr sigblock 3 ,
.Xr siginterrupt 3 ,
.Xr sigsetmask 3 ,
.Xr sigsetops 3 ,
.Xr sigvec 3 ,
.Xr tty 4