.\" $OpenBSD: ptrace.2,v 1.24 2006/05/15 21:12:45 kettenis Exp $ .\" $NetBSD: ptrace.2,v 1.3 1996/02/23 01:39:41 jtc Exp $ .\" .\" This file is in the public domain. .Dd March 2, 2004 .Dt PTRACE 2 .Os .Sh NAME .Nm ptrace .Nd process tracing and debugging .Sh SYNOPSIS .Fd #include .Fd #include .Ft int .Fn ptrace "int request" "pid_t pid" "caddr_t addr" "int data" .Sh DESCRIPTION .Fn ptrace provides tracing and debugging facilities. It allows one process (the .Em tracing process) to control another (the .Em traced process). Most of the time, the traced process runs normally, but when it receives a signal .Po see .Xr sigaction 2 .Pc , it stops. The tracing process is expected to notice this via .Xr wait 2 or the delivery of a .Dv SIGCHLD signal, examine the state of the stopped process, and cause it to terminate or continue as appropriate. .Fn ptrace is the mechanism by which all this happens. .Fn ptrace is only available on kernels compiled with the .Cm PTRACE option. .Pp The .Fa request argument specifies what operation is being performed; the meaning of the rest of the arguments depends on the operation, but except for one special case noted below, all .Fn ptrace calls are made by the tracing process, and the .Fa pid argument specifies the process ID of the traced process. .Fa request can be: .Bl -tag -width 12n .It Dv PT_TRACE_ME This request is the only one used by the traced process; it declares that the process expects to be traced by its parent. All the other arguments are ignored. (If the parent process does not expect to trace the child, it will probably be rather confused by the results; once the traced process stops, it cannot be made to continue except via .Eo \& .Fn ptrace .Ec \&.) When a process has used this request and calls .Xr execve 2 or any of the routines built on it .Po such as .Xr execv 3 .Pc , it will stop before executing the first instruction of the new image. Also, any setuid or setgid bits on the executable being executed will be ignored. .It Dv PT_READ_I , Dv PT_READ_D These requests read a single .Li int of data from the traced process' address space. Traditionally, .Fn ptrace has allowed for machines with distinct address spaces for instruction and data, which is why there are two requests: conceptually, .Dv PT_READ_I reads from the instruction space and .Dv PT_READ_D reads from the data space. In the current .Ox implementation, these two requests are completely identical. The .Fa addr argument specifies the address (in the traced process' virtual address space) at which the read is to be done. This address does not have to meet any alignment constraints. The value read is returned as the return value from .Eo \& .Fn ptrace .Ec . .It Dv PT_WRITE_I , Dv PT_WRITE_D These requests parallel .Dv PT_READ_I and .Dv PT_READ_D , except that they write rather than read. The .Fa data argument supplies the value to be written. .\" .It Dv PT_READ_U .\" This request reads an .\" .Li int .\" from the traced process' user structure. The .\" .Fa addr .\" argument specifies the location of the int relative to the base of the .\" user structure; it will usually be an integer value cast to .\" .Li caddr_t .\" either explicitly or via the presence of a prototype for .\" .Eo \& .\" .Fn ptrace .\" .Ec . .\" Unlike .\" .Dv PT_READ_I .\" and .\" .Dv PT_READ_D , .\" .Fa addr .\" must be aligned on an .\" .Li int .\" boundary. The value read is returned as the return value from .\" .Eo \& .\" .Fn ptrace .\" .Ec . .\" .It Dv PT_WRITE_U .\" This request writes an .\" .Li int .\" into the traced process' user structure. .\" .Fa addr .\" specifies the offset, just as for .\" .Dv PT_READ_U , .\" and .\" .Fa data .\" specifies the value to be written, just as for .\" .Dv PT_WRITE_I .\" and .\" .Dv PT_WRITE_D . .It Dv PT_CONTINUE The traced process continues execution. .Fa addr is an address specifying the place where execution is to be resumed (a new value for the program counter), or .Li (caddr_t)1 to indicate that execution is to pick up where it left off. .Fa data provides a signal number to be delivered to the traced process as it resumes execution, or 0 if no signal is to be sent. .It Dv PT_KILL The traced process terminates, as if .Dv PT_CONTINUE had been used with .Dv SIGKILL given as the signal to be delivered. .It Dv PT_ATTACH This request allows a process to gain control of an otherwise unrelated process and begin tracing it. It does not need any cooperation from the to-be-traced process. In this case, .Fa pid specifies the process ID of the to-be-traced process, and the other two arguments are ignored. This request requires that the target process must have the same real UID as the tracing process, and that it must not be executing a set-user-ID or set-group-ID executable. (If the tracing process is running as root, these restrictions do not apply.) The tracing process will see the newly traced process stop and may then control it as if it had been traced all along. .It Dv PT_DETACH This request is like .Dv PT_CONTINUE , except that it does not allow specifying an alternate place to continue execution, and after it succeeds, the traced process is no longer traced and continues execution normally. .It Dv PT_IO This request is a more general interface that can be used instead of .Dv PT_READ_D , .Dv PT_WRITE_D , .Dv PT_READ_I and .Dv PT_WRITE_I . The I/O request is encoded in a .Dq Li "struct ptrace_io_desc" defined as: .Bd -literal -offset indent struct ptrace_io_desc { int piod_op; void *piod_offs; void *piod_addr; size_t piod_len; }; .Ed .Pp Where .Fa piod_offs is the offset within the traced process where the I/O operation should be made, .Fa piod_addr is the buffer in the parent and .Fa piod_len is the length of the I/O request. The .Fa piod_op member specifies what operation needs to be done. Possible values are: .Pp .Bl -tag -width Ds -offset indent -compact .It PIOD_READ_D .It PIOD_WRITE_D .It PIOD_READ_I .It PIOD_WRITE_I .El .Pp See also the description of .Dv PT_READ_I for the difference between D and I spaces. A pointer to the descriptor is passed in .Fa addr . On return the .Fa piod_len field in the descriptor will be updated with the actual number of bytes transferred. If the requested I/O couldn't be successfully performed .Fn ptrace will return .Li -1 and set .Va errno . .It Dv PT_SET_EVENT_MASK This request can be used to specify which events in the traced process should be reported to the tracing process. These events are specified in a .Dq Li "struct ptrace_event" defined as: .Bd -literal -offset indent typedef struct ptrace_event { int pe_set_event; } ptrace_event_t; .Ed .Pp Where .Fa pe_set_event is the set of events to be reported. This set is formed by OR'ing together the following values: .Bl -tag -width 18n .It PTRACE_FORK Report .Xr fork 2 . .El .Pp A pointer to this structure is passed in .Fa addr . The .Fa data argument should be set to .Li sizeof(struct ptrace_event) . .It Dv PT_GET_EVENT_MASK This request can be used to determine which events in the traced process will be reported. The information is read into the .Dq Li struct ptrace_event pointed to by .Fa addr . The .Fa data argument should be set to .Li sizeof(struct ptrace_event) . .It Dv PT_GET_PROCESS_STATE This request reads the state information associated with the event that stopped the traced process. The information is reported in a .Dq Li "struct ptrace_state" defined as: .Bd -literal -offset indent typedef struct ptrace_state { int pe_report_event; pid_t pe_other_pid; } ptrace_state_t; .Ed .Pp Where .Fa pe_report_event is the event being reported. If the event being reported is .Dv PTRACE_FORK , .Fa pe_other_pid will be set to the process ID of the other end of the fork. A pointer to this structure is passed in .Fa addr . The .Fa data argument should be set to .Li sizeof(struct ptrace_state) . .El .Pp Additionally, machine-specific requests can exist. Depending on the architecture, the following requests may be available under .Ox : .Bl -tag -width 12n .It Dv PT_GETREGS Pq all platforms This request reads the traced process' machine registers into the .Dq Li struct reg (defined in .Aq Pa machine/reg.h ) pointed to by .Fa addr . .It Dv PT_SETREGS Pq all platforms This request is the converse of .Dv PT_GETREGS ; it loads the traced process' machine registers from the .Dq Li struct reg (defined in .Aq Pa machine/reg.h ) pointed to by .Fa addr . .\" .It Dv PT_SYSCALL .\" This request is like .\" .Dv PT_CONTINUE .\" except that the process will stop next time it executes any system .\" call. Information about the system call can be examined with .\" .Dv PT_READ_U .\" and potentially modified with .\" .Dv PT_WRITE_U .\" through the .\" .Li u_kproc.kp_proc.p_md .\" element of the user structure (see below). If the process is continued .\" with another .\" .Dv PT_SYSCALL .\" request, it will stop again on exit from the syscall, at which point .\" the return values can be examined and potentially changed. The .\" .Li u_kproc.kp_proc.p_md .\" element is of type .\" .Dq Li struct mdproc , .\" which should be declared by including .\" .Aq Pa sys/param.h , .\" .Aq Pa sys/user.h , .\" and .\" .Aq Pa machine/proc.h , .\" and contains the following fields (among others): .\" .Bl -item -compact -offset indent .\" .It .\" .Li syscall_num .\" .It .\" .Li syscall_nargs .\" .It .\" .Li syscall_args[8] .\" .It .\" .Li syscall_err .\" .It .\" .Li syscall_rv[2] .\" .El .\" When a process stops on entry to a syscall, .\" .Li syscall_num .\" holds the number of the syscall, .\" .Li syscall_nargs .\" holds the number of arguments it expects, and .\" .Li syscall_args .\" holds the arguments themselves. (Only the first .\" .Li syscall_nargs .\" elements of .\" .Li syscall_args .\" are guaranteed to be useful.) When a process stops on exit from a .\" syscall, .\" .Li syscall_num .\" is .\" .Eo \& .\" .Li -1 .\" .Ec , .\" .Li syscall_err .\" holds the error number .\" .Po .\" see .\" .Xr errno 2 .\" .Pc , .\" or 0 if no error occurred, and .\" .Li syscall_rv .\" holds the return values. (If the syscall returns only one value, only .\" .Li syscall_rv[0] .\" is useful.) The tracing process can modify any of these with .\" .Dv PT_WRITE_U ; .\" only some modifications are useful. .\" .Pp .\" On entry to a syscall, .\" .Li syscall_num .\" can be changed, and the syscall actually performed will correspond to .\" the new number (it is the responsibility of the tracing process to fill .\" in .\" .Li syscall_args .\" appropriately for the new call, but there is no need to modify .\" .Eo \& .\" .Li syscall_nargs .\" .Ec ). .\" If the new syscall number is 0, no syscall is actually performed; .\" instead, .\" .Li syscall_err .\" and .\" .Li syscall_rv .\" are passed back to the traced process directly (and therefore should be .\" filled in). If the syscall number is otherwise out of range, a dummy .\" syscall which simply produces an .\" .Er ENOSYS .\" error is effectively performed. .\" .Pp .\" On exit from a syscall, only .\" .Li syscall_err .\" and .\" .Li syscall_rv .\" can usefully be changed; they are set to the values returned by the .\" syscall and will be passed back to the traced process by the normal .\" syscall return mechanism. .It Xo Dv PT_STEP .No (not available on sparc and sparc64) .Xc The traced process continues execution, as in request .Dv PT_CONTINUE ; however, execution stops as soon as possible after execution of at least one instruction .Pq single-step . .\" m88k - vax (no general fp registers) .\" mips64 (fp registers in the main reg structure) .It Xo Dv PT_GETFPREGS .No (not available on aviion, luna88k, mvme88k, sgi and vax) .Xc This request reads the traced process' floating-point registers into the .Dq Li struct fpreg (defined in .Aq Pa machine/reg.h ) pointed to by .Fa addr . .It Xo Dv PT_SETFPREGS .No (not available on aviion, luna88k, mvme88k, sgi and vax) .Xc This request is the converse of .Dv PT_GETFPREGS ; it loads the traced process' floating-point registers from the .Dq Li struct fpreg (defined in .Aq Pa machine/reg.h ) pointed to by .Fa addr . .It Dv PT_GETXMMREGS Pq i386 only This request reads the traced process' XMM registers into the .Dq Li struct xmmregs (defined in .Aq Pa machine/reg.h ) pointed to by .Fa addr . .It Dv PT_SETXMMREGS Pq i386 only This request is the converse of .Dv PT_GETXMMREGS ; it loads the traced process' XMM registers from the .Dq Li struct xmmregs (defined in .Aq Pa machine/reg.h ) pointed to by .Fa addr . .It Dv PT_WCOOKIE Pq sparc and sparc64 only This request reads the traced process' .Sq window cookie into the .Li int pointed to by .Fa addr . The window cookie needs to be .Sq XOR'ed to stack-saved program counters. .El .Sh ERRORS Some requests can cause .Fn ptrace to return .Li -1 as a non-error value; to disambiguate, .Va errno is set to zero and this should be checked. The possible errors are: .Bl -tag -width 4n .It Bq Er ESRCH No process having the specified process ID exists. .It Bq Er EINVAL .Bl -bullet -compact .It A process attempted to use .Dv PT_ATTACH on itself. .It The .Fa request was not one of the legal requests. .\" .It .\" The .\" .Fa addr .\" to .\" .Dv PT_READ_U .\" or .\" .Dv PT_WRITE_U .\" was not .\" .Li int Ns \&-aligned. .It The signal number (in .Fa data ) to .Dv PT_CONTINUE .\" or .\" .Dv PT_SYSCALL was neither 0 nor a legal signal number. .It .Dv PT_GETREGS , .Dv PT_SETREGS , .Dv PT_GETFPREGS , or .Dv PT_SETFPREGS was attempted on a process with no valid register set. (This is normally true only of system processes.) .El .It Bq Er EBUSY .Bl -bullet -compact .It .Dv PT_ATTACH was attempted on a process that was already being traced. .It A request attempted to manipulate a process that was being traced by some process other than the one making the request. .It A request (other than .Dv PT_ATTACH ) specified a process that wasn't stopped. .El .It Bq Er EPERM .Bl -bullet -compact .It A request (other than .Dv PT_ATTACH ) attempted to manipulate a process that wasn't being traced at all. .It An attempt was made to use .Dv PT_ATTACH on a process in violation of the requirements listed under .Dv PT_ATTACH above. .It An attempt was made to use .Dv PT_ATTACH on a system process. .El .El .Sh BUGS On several RISC architectures (such as aviion, luna88k, mvme88k, sparc and sparc64), the PC is set to the provided PC value for .Dv PT_CONTINUE and similar calls, and the remainder of the execution pipeline registers are set to the following instructions, even if the instruction at PC is a branch instruction. Using .Dv PT_GETREGS and .Dv PT_SETREGS to modify the PC, passing .Li (caddr_t)1 to .Eo \& .Fn ptrace .Ec , should be able to sidestep this. .\" .Pp .\" When using .\" .Dv PT_SYSCALL , .\" there is no easy way to tell whether the traced process stopped because .\" it made a syscall or because a signal was sent at a moment that it just .\" happened to have valid-looking garbage in its .\" .Dq Li struct mdproc .