/* $OpenBSD: ftp-proxy.c,v 1.28 2003/01/23 23:15:16 djm Exp $ */ /* * Copyright (c) 1996-2001 * Obtuse Systems Corporation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Obtuse Systems nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY OBTUSE SYSTEMS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL OBTUSE SYSTEMS CORPORATION OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /* * ftp proxy, Originally based on juniper_ftp_proxy from the Obtuse * Systems juniper firewall, written by Dan Boulet * and Bob Beck * * This version basically passes everything through unchanged except * for the PORT and the * "227 Entering Passive Mode" reply. * * A PORT command is handled by noting the IP address and port number * specified and then configuring a listen port on some very high port * number and telling the server about it using a PORT message. * We then watch for an in-bound connection on the port from the server * and connect to the client's port when it happens. * * A "227 Entering Passive Mode" reply is handled by noting the IP address * and port number specified and then configuring a listen port on some * very high port number and telling the client about it using a * "227 Entering Passive Mode" reply. * We then watch for an in-bound connection on the port from the client * and connect to the server's port when it happens. * * supports tcp wrapper lookups/access control with the -w flag using * the real destination address - the tcp wrapper stuff is done after * the real destination address is retrieved from pf * */ /* * TODO: * Plenty, this is very basic, with the idea to get it in clean first. * * - IPv6 and EPASV support * - Content filter support * - filename filter support * - per-user rules perhaps. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "util.h" #ifdef LIBWRAP #include int allow_severity = LOG_INFO; int deny_severity = LOG_NOTICE; #endif /* LIBWRAP */ int min_port = IPPORT_HIFIRSTAUTO; int max_port = IPPORT_HILASTAUTO; #define STARTBUFSIZE 1024 /* Must be at least 3 */ /* * Variables used to support PORT mode connections. * * This gets a bit complicated. * * If PORT mode is on then client_listen_sa describes the socket that * the real client is listening on and server_listen_sa describes the * socket that we are listening on (waiting for the real server to connect * with us). * * If PASV mode is on then client_listen_sa describes the socket that * we are listening on (waiting for the real client to connect to us on) * and server_listen_sa describes the socket that the real server is * listening on. * * If the socket we are listening on gets a connection then we connect * to the other side's socket. Similarily, if a connected socket is * shutdown then we shutdown the other side's socket. */ double xfer_start_time; struct sockaddr_in real_server_sa; struct sockaddr_in client_listen_sa; struct sockaddr_in server_listen_sa; int client_listen_socket = -1; /* Only used in PASV mode */ int client_data_socket = -1; /* Connected socket to real client */ int server_listen_socket = -1; /* Only used in PORT mode */ int server_data_socket = -1; /* Connected socket to real server */ int client_data_bytes, server_data_bytes; int AnonFtpOnly; int Verbose; int NatMode; char ClientName[NI_MAXHOST]; char RealServerName[NI_MAXHOST]; char OurName[NI_MAXHOST]; char *User = "proxy"; char *Group; extern int Debug_Level; extern int Use_Rdns; extern char *__progname; typedef enum { UNKNOWN_MODE, PORT_MODE, PASV_MODE, EPRT_MODE, EPSV_MODE } connection_mode_t; connection_mode_t connection_mode; extern void debuglog(int debug_level, const char *fmt, ...); static void usage(void) { syslog(LOG_NOTICE, "usage: %s [-AnrVw] [-t timeout] [-D debuglevel] %s %s", __progname, "[-g group] [-u user] [-m min_port]", "[-M max_port]"); exit(EX_USAGE); } static void close_client_data(void) { if (client_data_socket >= 0) { shutdown(client_data_socket, 2); close(client_data_socket); client_data_socket = -1; } } static void close_server_data(void) { if (server_data_socket >= 0) { shutdown(server_data_socket, 2); close(server_data_socket); server_data_socket = -1; } } static void drop_privs(void) { struct passwd *pw; struct group *gr; uid_t uid = 0; gid_t gid = 0; if (User != NULL) { pw = getpwnam(User); if (pw == NULL) { syslog(LOG_ERR, "cannot find user %s", User); exit(EX_USAGE); } uid = pw->pw_uid; gid = pw->pw_gid; } if (Group != NULL) { gr = getgrnam(Group); if (gr == NULL) { syslog(LOG_ERR, "cannot find group %s", Group); exit(EX_USAGE); } gid = gr->gr_gid; } if (gid != 0 && (setegid(gid) == -1 || setgid(gid) == -1)) { syslog(LOG_ERR, "cannot drop group privs (%m)"); exit(EX_CONFIG); } if (uid != 0 && (seteuid(uid) == -1 || setuid(uid) == -1)) { syslog(LOG_ERR, "cannot drop root privs (%m)"); exit(EX_CONFIG); } } #ifdef LIBWRAP /* * Check a connection against the tcpwrapper, log if we're going to * reject it, returns: 0 -> reject, 1 -> accept. We add in hostnames * if we are set to do reverse DNS, otherwise no. */ static int check_host(struct sockaddr_in *client_sin, struct sockaddr_in *server_sin) { char cname[NI_MAXHOST]; char sname[NI_MAXHOST]; struct request_info request; int i; request_init(&request, RQ_DAEMON, __progname, RQ_CLIENT_SIN, client_sin, RQ_SERVER_SIN, server_sin, RQ_CLIENT_ADDR, inet_ntoa(client_sin->sin_addr), 0); if (Use_Rdns) { /* * We already looked these up, but we have to do it again * for tcp wrapper, to ensure that we get the DNS name, since * the tcp wrapper cares about these things, and we don't * want to pass in a printed address as a name. */ i = getnameinfo((struct sockaddr *) &client_sin->sin_addr, sizeof(&client_sin->sin_addr), cname, sizeof(cname), NULL, 0, NI_NAMEREQD); if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN) strlcpy(cname, STRING_UNKNOWN, sizeof(cname)); i = getnameinfo((struct sockaddr *)&server_sin->sin_addr, sizeof(&server_sin->sin_addr), sname, sizeof(sname), NULL, 0, NI_NAMEREQD); if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN) strlcpy(sname, STRING_UNKNOWN, sizeof(sname)); } else { /* * ensure the TCP wrapper doesn't start doing * reverse DNS lookups if we aren't supposed to. */ strlcpy(cname, STRING_UNKNOWN, sizeof(cname)); strlcpy(sname, STRING_UNKNOWN, sizeof(sname)); } request_set(&request, RQ_SERVER_ADDR, inet_ntoa(server_sin->sin_addr), 0); request_set(&request, RQ_CLIENT_NAME, cname, RQ_SERVER_NAME, sname, 0); if (!hosts_access(&request)) { syslog(LOG_NOTICE, "tcpwrappers rejected: %s -> %s", ClientName, RealServerName); return(0); } return(1); } #endif /* LIBWRAP */ double wallclock_time(void) { struct timeval tv; gettimeofday(&tv, NULL); return(tv.tv_sec + tv.tv_usec / 1e6); } /* * Show the stats for this data transfer */ void show_xfer_stats(void) { char tbuf[1000]; double delta; size_t len; int i; if (!Verbose) return; delta = wallclock_time() - xfer_start_time; if (delta < 0.001) delta = 0.001; if (client_data_bytes == 0 && server_data_bytes == 0) { syslog(LOG_INFO, "data transfer complete (no bytes transferred)"); return; } len = sizeof(tbuf); if (delta >= 60) { int idelta; idelta = delta + 0.5; if (idelta >= 60*60) { i = snprintf(tbuf, len, "data transfer complete (%dh %dm %ds", idelta / (60*60), (idelta % (60*60)) / 60, idelta % 60); if (i >= len) goto logit; len -= i; } else { i = snprintf(tbuf, len, "data transfer complete (%dm %ds", idelta / 60, idelta % 60); if (i >= len) goto logit; len -= i; } } else { i = snprintf(tbuf, len, "data transfer complete (%.1fs", delta); if (i >= len) goto logit; len -= i; } if (client_data_bytes > 0) { i = snprintf(&tbuf[strlen(tbuf)], len, ", %d bytes to server) (%.1fKB/s", client_data_bytes, (client_data_bytes / delta) / (double)1024); if (i >= len) goto logit; len -= i; } if (server_data_bytes > 0) { i = snprintf(&tbuf[strlen(tbuf)], len, ", %d bytes to client) (%.1fKB/s", server_data_bytes, (server_data_bytes / delta) / (double)1024); if (i >= len) goto logit; len -= i; } strlcat(tbuf, ")", sizeof(tbuf)); logit: syslog(LOG_INFO, "%s", tbuf); } void log_control_command (char *cmd, int client) { /* log an ftp control command or reply */ char *logstring; int level = LOG_DEBUG; if (!Verbose) return; /* don't log passwords */ if (strncasecmp(cmd, "pass ", 5) == 0) logstring = "PASS XXXX"; else logstring = cmd; if (client) { /* log interesting stuff at LOG_INFO, rest at LOG_DEBUG */ if ((strncasecmp(cmd, "user ", 5) == 0) || (strncasecmp(cmd, "retr ", 5) == 0) || (strncasecmp(cmd, "cwd ", 4) == 0) || (strncasecmp(cmd, "stor " ,5) == 0)) level = LOG_INFO; } syslog(level, "%s %s", client ? "client:" : " server:", logstring); } /* * set ourselves up for a new data connection. Direction is toward client if * "server" is 0, towards server otherwise. */ int new_dataconn(int server) { /* * Close existing data conn. */ if (client_listen_socket != -1) { close(client_listen_socket); client_listen_socket = -1; } close_client_data(); if (server_listen_socket != -1) { close(server_listen_socket); server_listen_socket = -1; } close_server_data(); if (server) { bzero(&server_listen_sa, sizeof(server_listen_sa)); server_listen_socket = get_backchannel_socket(SOCK_STREAM, min_port, max_port, -1, 1, &server_listen_sa); if (server_listen_socket == -1) { syslog(LOG_INFO, "server socket bind() failed (%m)"); exit(EX_OSERR); } if (listen(server_listen_socket, 5) != 0) { syslog(LOG_INFO, "server socket listen() failed (%m)"); exit(EX_OSERR); } } else { bzero(&client_listen_sa, sizeof(client_listen_sa)); client_listen_socket = get_backchannel_socket(SOCK_STREAM, min_port, max_port, -1, 1, &client_listen_sa); if (client_listen_socket == -1) { syslog(LOG_NOTICE, "cannot get client listen socket (%m)"); exit(EX_OSERR); } if (listen(client_listen_socket, 5) != 0) { syslog(LOG_NOTICE, "cannot listen on client socket (%m)"); exit(EX_OSERR); } } return(0); } static void connect_pasv_backchannel(void) { struct sockaddr_in listen_sa; int salen; /* * We are about to accept a connection from the client. * This is a PASV data connection. */ debuglog(2, "client listen socket ready"); close_server_data(); close_client_data(); salen = sizeof(listen_sa); client_data_socket = accept(client_listen_socket, (struct sockaddr *)&listen_sa, &salen); if (client_data_socket < 0) { syslog(LOG_NOTICE, "accept() failed (%m)"); exit(EX_OSERR); } close(client_listen_socket); client_listen_socket = -1; memset(&listen_sa, 0, sizeof(listen_sa)); server_data_socket = get_backchannel_socket(SOCK_STREAM, min_port, max_port, -1, 1, &listen_sa); if (server_data_socket < 0) { syslog(LOG_NOTICE, "get_backchannel_socket() failed (%m)"); exit(EX_OSERR); } if (connect(server_data_socket, (struct sockaddr *) &server_listen_sa, sizeof(server_listen_sa)) != 0) { syslog(LOG_NOTICE, "connect() failed (%m)"); exit(EX_NOHOST); } client_data_bytes = 0; server_data_bytes = 0; xfer_start_time = wallclock_time(); } static void connect_port_backchannel(void) { struct sockaddr_in listen_sa; int salen; /* * We are about to accept a connection from the server. * This is a PORT or EPRT data connection. */ debuglog(2, "server listen socket ready"); close_server_data(); close_client_data(); salen = sizeof(listen_sa); server_data_socket = accept(server_listen_socket, (struct sockaddr *)&listen_sa, &salen); if (server_data_socket < 0) { syslog(LOG_NOTICE, "accept() failed (%m)"); exit(EX_OSERR); } close(server_listen_socket); server_listen_socket = -1; if (getuid() != 0) { /* * We're not running as root, so we get a backchannel * socket bound in our designated range, instead of * getting one bound to port 20 - This is deliberately * not RFC compliant. */ bzero(&listen_sa.sin_addr, sizeof(struct in_addr)); client_data_socket = get_backchannel_socket(SOCK_STREAM, min_port, max_port, -1, 1, &listen_sa); if (client_data_socket < 0) { syslog(LOG_NOTICE, "get_backchannel_socket() failed (%m)"); exit(EX_OSERR); } } else { /* * We're root, get our backchannel socket bound to port * 20 here, so we're fully RFC compliant. */ client_data_socket = socket(AF_INET, SOCK_STREAM, 0); salen = 1; listen_sa.sin_family = AF_INET; bzero(&listen_sa.sin_addr, sizeof(struct in_addr)); listen_sa.sin_port = htons(20); if (setsockopt(client_data_socket, SOL_SOCKET, SO_REUSEADDR, &salen, sizeof(salen)) == -1) { syslog(LOG_NOTICE, "setsockopt() failed (%m)"); exit(EX_OSERR); } if (bind(client_data_socket, (struct sockaddr *)&listen_sa, sizeof(listen_sa)) == - 1) { syslog(LOG_NOTICE, "data channel bind() failed (%m)"); exit(EX_OSERR); } } if (connect(client_data_socket, (struct sockaddr *) &client_listen_sa, sizeof(client_listen_sa)) != 0) { syslog(LOG_INFO, "cannot connect data channel (%m)"); exit(EX_NOHOST); } client_data_bytes = 0; server_data_bytes = 0; xfer_start_time = wallclock_time(); } void do_client_cmd(struct csiob *client, struct csiob *server) { int i, j, rv; char tbuf[100]; char *sendbuf = NULL; log_control_command((char *)client->line_buffer, 1); /* client->line_buffer is an ftp control command. * There is no reason for these to be very long. * In the interest of limiting buffer overrun attempts, * we catch them here. */ if (strlen((char *)client->line_buffer) > 512) { syslog(LOG_NOTICE, "excessively long control command"); exit(EX_DATAERR); } /* * Check the client user provided if needed */ if (AnonFtpOnly && strncasecmp((char *)client->line_buffer, "user ", strlen("user ")) == 0) { char *cp; cp = client->line_buffer + strlen("user "); if ((strcasecmp(cp, "ftp\r\n") != 0) && (strcasecmp(cp, "anonymous\r\n") != 0)) { /* * this isn't anonymous - give the client an * error before they send a password */ snprintf(tbuf, sizeof(tbuf), "500 Only anonymous FTP is allowed\r\n"); j = 0; i = strlen(tbuf); do { rv = send(client->fd, tbuf + j, i - j, 0); if (rv == -1 && errno != EAGAIN && errno != EINTR) break; else if (rv != -1) j += rv; } while (j >= 0 && j < i); sendbuf = NULL; } else sendbuf = client->line_buffer; } else if ((strncasecmp((char *)client->line_buffer, "eprt ", strlen("eprt ")) == 0)) { /* Watch out for EPRT commands */ char *line = NULL, *q, *p, *result[3], delim; struct addrinfo hints, *res = NULL; unsigned long proto; j = 0; line = strdup(client->line_buffer+strlen("eprt ")); if (line == NULL) { syslog(LOG_ERR, "insufficient memory"); exit(EX_UNAVAILABLE); } p = line; delim = p[0]; p++; memset(result,0, sizeof(result)); for (i = 0; i < 3; i++) { q = strchr(p, delim); if (!q || *q != delim) goto parsefail; *q++ = '\0'; result[i] = p; p = q; } proto = strtoul(result[0], &p, 10); if (!*result[0] || *p) goto protounsupp; memset(&hints, 0, sizeof(hints)); if (proto != 1) /* 1 == AF_INET - all we support for now */ goto protounsupp; hints.ai_family = AF_INET; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_NUMERICHOST; /*no DNS*/ if (getaddrinfo(result[1], result[2], &hints, &res)) goto parsefail; if (res->ai_next) goto parsefail; if (sizeof(client_listen_sa) < res->ai_addrlen) goto parsefail; memcpy(&client_listen_sa, res->ai_addr, res->ai_addrlen); debuglog(1, "client wants us to use %s:%u", inet_ntoa(client_listen_sa.sin_addr), htons(client_listen_sa.sin_port)); /* * Configure our own listen socket and tell the server about it */ new_dataconn(1); connection_mode = EPRT_MODE; debuglog(1, "we want server to use %s:%u", inet_ntoa(server->sa.sin_addr), ntohs(server_listen_sa.sin_port)); snprintf(tbuf, sizeof(tbuf), "EPRT |%d|%s|%u|\r\n", 1, inet_ntoa(server->sa.sin_addr), ntohs(server_listen_sa.sin_port)); debuglog(1, "to server (modified): %s", tbuf); sendbuf = tbuf; goto out; parsefail: snprintf(tbuf, sizeof(tbuf), "500 Invalid argument; rejected\r\n"); sendbuf = NULL; goto out; protounsupp: /* we only support AF_INET for now */ if (proto == 2) snprintf(tbuf, sizeof(tbuf), "522 Protocol not supported, use (1)\r\n"); else snprintf(tbuf, sizeof(tbuf), "501 Protocol not supported\r\n"); sendbuf = NULL; out: if (line) free(line); if (res) freeaddrinfo(res); if (sendbuf == NULL) { debuglog(1, "to client (modified): %s", tbuf); i = strlen(tbuf); do { rv = send(client->fd, tbuf + j, i - j, 0); if (rv == -1 && errno != EAGAIN && errno != EINTR) break; else if (rv != -1) j += rv; } while (j >= 0 && j < i); } } else if (!NatMode && (strncasecmp((char *)client->line_buffer, "epsv", strlen("epsv")) == 0)) { /* * If we aren't in NAT mode, deal with EPSV. * EPSV is a problem - Unlike PASV, the reply from the * server contains *only* a port, we can't modify the reply * to the client and get the client to connect to us without * resorting to using a dynamic rdr rule we have to add in * for the reply to this connection, and take away afterwards. * so this will wait until we have the right solution for rule * additions/deletions in pf. * * in the meantime we just tell the client we don't do it, * and most clients should fall back to using PASV. */ snprintf(tbuf, sizeof(tbuf), "500 EPSV command not understood\r\n"); debuglog(1, "to client (modified): %s", tbuf); j = 0; i = strlen(tbuf); do { rv = send(client->fd, tbuf + j, i - j, 0); if (rv == -1 && errno != EAGAIN && errno != EINTR) break; else if (rv != -1) j += rv; } while (j >= 0 && j < i); sendbuf = NULL; } else if (strncasecmp((char *)client->line_buffer, "port ", strlen("port ")) == 0) { unsigned int values[6]; int byte_number; u_char *tailptr; debuglog(1, "Got a PORT command"); tailptr = &client->line_buffer[strlen("port ")]; byte_number = 0; values[0] = 0; i = sscanf(tailptr, "%u,%u,%u,%u,%u,%u", &values[0], &values[1], &values[2], &values[3], &values[4], &values[5]); if (i != 6) { syslog(LOG_INFO, "malformed PORT command (%s)", client->line_buffer); exit(EX_DATAERR); } for (i = 0; i<6; i++) { if (values[i] > 255) { syslog(LOG_INFO, "malformed PORT command (%s)", client->line_buffer); exit(EX_DATAERR); } } client_listen_sa.sin_family = AF_INET; client_listen_sa.sin_addr.s_addr = htonl((values[0] << 24) | (values[1] << 16) | (values[2] << 8) | (values[3] << 0)); client_listen_sa.sin_port = htons((values[4] << 8) | values[5]); debuglog(1, "client wants us to use %u.%u.%u.%u:%u", values[0], values[1], values[2], values[3], (values[4] << 8) | values[5]); /* * Configure our own listen socket and tell the server about it */ new_dataconn(1); connection_mode = PORT_MODE; debuglog(1, "we want server to use %s:%u", inet_ntoa(server->sa.sin_addr), ntohs(server_listen_sa.sin_port)); snprintf(tbuf, sizeof(tbuf), "PORT %u,%u,%u,%u,%u,%u\r\n", ((u_char *)&server->sa.sin_addr.s_addr)[0], ((u_char *)&server->sa.sin_addr.s_addr)[1], ((u_char *)&server->sa.sin_addr.s_addr)[2], ((u_char *)&server->sa.sin_addr.s_addr)[3], ((u_char *)&server_listen_sa.sin_port)[0], ((u_char *)&server_listen_sa.sin_port)[1]); debuglog(1, "to server (modified): %s", tbuf); sendbuf = tbuf; } else sendbuf = client->line_buffer; /* *send our (possibly modified) control command in sendbuf * on it's way to the server */ if (sendbuf != NULL) { j = 0; i = strlen(sendbuf); do { rv = send(server->fd, sendbuf + j, i - j, 0); if (rv == -1 && errno != EAGAIN && errno != EINTR) break; else if (rv != -1) j += rv; } while (j >= 0 && j < i); } } void do_server_reply(struct csiob *server, struct csiob *client) { int code, i, j, rv; struct in_addr *iap; static int continuing = 0; char tbuf[100], *sendbuf, *p; log_control_command((char *)server->line_buffer, 0); if (strlen((char *)server->line_buffer) > 512) { /* * someone's playing games. Have a cow in the syslogs and * exit - we don't pass this on for fear of hurting * our other end, which might be poorly implemented. */ syslog(LOG_NOTICE, "long FTP control reply"); exit(EX_DATAERR); } /* * Watch out for "227 Entering Passive Mode ..." replies */ code = strtol((char *)server->line_buffer, &p, 10); if (!*(server->line_buffer) || (*p != ' ' && *p != '-')) { if (continuing) goto sendit; syslog(LOG_INFO, "malformed control reply"); exit(EX_DATAERR); } if (code <= 0 || code > 999) { if (continuing) goto sendit; syslog(LOG_INFO, "invalid server reply code %d", code); exit(EX_DATAERR); } if (*p == '-') continuing = 1; else continuing = 0; if (code == 227 && !NatMode) { unsigned int values[6]; u_char *tailptr; int byte_number; debuglog(1, "Got a PASV reply"); debuglog(1, "{%s}", (char *)server->line_buffer); tailptr = strchr((char *)server->line_buffer, '('); if (tailptr == NULL) { tailptr = strrchr((char *)server->line_buffer, ' '); if (tailptr == NULL) { syslog(LOG_NOTICE, "malformed 227 reply"); exit(EX_DATAERR); } } tailptr++; /* skip past space or ( */ byte_number = 0; values[0] = 0; i = sscanf(tailptr, "%u,%u,%u,%u,%u,%u", &values[0], &values[1], &values[2], &values[3], &values[4], &values[5]); if (i != 6) { syslog(LOG_INFO, "malformed PASV reply (%s)", client->line_buffer); exit(EX_DATAERR); } for (i = 0; i<6; i++) if (values[i] > 255) { syslog(LOG_INFO, "malformed PASV reply(%s)", client->line_buffer); exit(EX_DATAERR); } server_listen_sa.sin_family = AF_INET; server_listen_sa.sin_addr.s_addr = htonl((values[0] << 24) | (values[1] << 16) | (values[2] << 8) | (values[3] << 0)); server_listen_sa.sin_port = htons((values[4] << 8) | values[5]); debuglog(1, "server wants us to use %s:%u", inet_ntoa(server_listen_sa.sin_addr), (values[4] << 8) | values[5]); new_dataconn(0); connection_mode = PASV_MODE; iap = &(server->sa.sin_addr); debuglog(1, "we want client to use %s:%u", inet_ntoa(*iap), htons(client_listen_sa.sin_port)); snprintf(tbuf, sizeof(tbuf), "227 Entering Passive Mode (%u,%u,%u,%u,%u,%u)\r\n", ((u_char *)iap)[0], ((u_char *)iap)[1], ((u_char *)iap)[2], ((u_char *)iap)[3], ((u_char *)&client_listen_sa.sin_port)[0], ((u_char *)&client_listen_sa.sin_port)[1]); debuglog(1, "to client (modified): %s", tbuf); sendbuf = tbuf; } else { sendit: sendbuf = server->line_buffer; } /* * send our (possibly modified) control command in sendbuf * on it's way to the client */ j = 0; i = strlen(sendbuf); do { rv = send(client->fd, sendbuf + j, i - j, 0); if (rv == -1 && errno != EAGAIN && errno != EINTR) break; else if (rv != -1) j += rv; } while (j >= 0 && j < i); } int main(int argc, char *argv[]) { struct csiob client_iob, server_iob; struct sigaction new_sa, old_sa; int sval, ch, salen, flags, i; int one = 1; long timeout_seconds = 0; struct timeval tv; #ifdef LIBWRAP int use_tcpwrapper = 0; #endif /* LIBWRAP */ while ((ch = getopt(argc, argv, "D:g:m:M:t:u:AnVwr")) != -1) { char *p; switch (ch) { case 'A': AnonFtpOnly = 1; /* restrict to anon usernames only */ break; case 'D': Debug_Level = strtol(optarg, &p, 10); if (!*optarg || *p) usage(); break; case 'g': Group = optarg; break; case 'm': min_port = strtol(optarg, &p, 10); if (!*optarg || *p) usage(); if (min_port < 0 || min_port > USHRT_MAX) usage(); break; case 'M': max_port = strtol(optarg, &p, 10); if (!*optarg || *p) usage(); if (max_port < 0 || max_port > USHRT_MAX) usage(); break; case 'n': NatMode = 1; /* pass all passives, we're using NAT */ break; case 'r': Use_Rdns = 1; /* look up hostnames */ break; case 't': timeout_seconds = strtol(optarg, &p, 10); if (!*optarg || *p) usage(); break; case 'u': User = optarg; break; case 'V': Verbose = 1; break; #ifdef LIBWRAP case 'w': use_tcpwrapper = 1; /* do the libwrap thing */ break; #endif /* LIBWRAP */ default: usage(); /* NOTREACHED */ } } argc -= optind; argv += optind; if (max_port < min_port) usage(); openlog(__progname, LOG_NDELAY|LOG_PID, LOG_DAEMON); setlinebuf(stdout); setlinebuf(stderr); memset(&client_iob, 0, sizeof(client_iob)); memset(&server_iob, 0, sizeof(server_iob)); if (get_proxy_env(0, &real_server_sa, &client_iob.sa) == -1) exit(EX_PROTOCOL); /* * We may now drop root privs, as we have done our ioctl for * pf. If we do drop root, we can't make backchannel connections * for PORT and EPRT come from port 20, which is not strictly * RFC compliant. This shouldn't cause problems for all but * the stupidest ftp clients and the stupidest packet filters. */ drop_privs(); /* * We check_host after get_proxy_env so that checks are done * against the original destination endpoint, not the endpoint * of our side of the rdr. This allows the use of tcpwrapper * rules to restrict destinations as well as sources of connections * for ftp. */ if (Use_Rdns) flags = 0; else flags = NI_NUMERICHOST | NI_NUMERICSERV; i = getnameinfo((struct sockaddr *)&client_iob.sa, sizeof(client_iob.sa), ClientName, sizeof(ClientName), NULL, 0, flags); if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN) { debuglog(2, "name resolution failure (client)"); exit(EX_OSERR); } i = getnameinfo((struct sockaddr *)&real_server_sa, sizeof(real_server_sa), RealServerName, sizeof(RealServerName), NULL, 0, flags); if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN) { debuglog(2, "name resolution failure (server)"); exit(EX_OSERR); } #ifdef LIBWRAP if (use_tcpwrapper && !check_host(&client_iob.sa, &real_server_sa)) exit(EX_NOPERM); #endif client_iob.fd = 0; syslog(LOG_INFO, "accepted connection from %s:%u to %s:%u", ClientName, ntohs(client_iob.sa.sin_port), RealServerName, ntohs(real_server_sa.sin_port)); server_iob.fd = get_backchannel_socket(SOCK_STREAM, min_port, max_port, -1, 1, &server_iob.sa); if (connect(server_iob.fd, (struct sockaddr *)&real_server_sa, sizeof(real_server_sa)) != 0) { syslog(LOG_INFO, "cannot connect to %s:%u (%m)", RealServerName, ntohs(real_server_sa.sin_port)); exit(EX_NOHOST); } /* * Now that we are connected to the real server, get the name * of our end of the server socket so we know our IP address * from the real server's perspective. */ salen = sizeof(server_iob.sa); getsockname(server_iob.fd, (struct sockaddr *)&server_iob.sa, &salen); i = getnameinfo((struct sockaddr *)&server_iob.sa, sizeof(server_iob.sa), OurName, sizeof(OurName), NULL, 0, flags); if (i != 0 && i != EAI_NONAME && i != EAI_AGAIN) { debuglog(2, "name resolution failure (local)"); exit(EX_OSERR); } debuglog(1, "local socket is %s:%u", OurName, ntohs(server_iob.sa.sin_port)); /* ignore SIGPIPE */ bzero(&new_sa, sizeof(new_sa)); new_sa.sa_handler = SIG_IGN; (void)sigemptyset(&new_sa.sa_mask); new_sa.sa_flags = SA_RESTART; if (sigaction(SIGPIPE, &new_sa, &old_sa) != 0) { syslog(LOG_ERR, "sigaction() failed (%m)"); exit(EX_OSERR); } if (setsockopt(client_iob.fd, SOL_SOCKET, SO_OOBINLINE, (char *)&one, sizeof(one)) == -1) { syslog(LOG_NOTICE, "cannot set SO_OOBINLINE (%m)"); exit(EX_OSERR); } client_iob.line_buffer_size = STARTBUFSIZE; client_iob.line_buffer = malloc(client_iob.line_buffer_size); client_iob.io_buffer_size = STARTBUFSIZE; client_iob.io_buffer = malloc(client_iob.io_buffer_size); client_iob.next_byte = 0; client_iob.io_buffer_len = 0; client_iob.alive = 1; client_iob.who = "client"; client_iob.send_oob_flags = 0; client_iob.real_sa = client_iob.sa; server_iob.line_buffer_size = STARTBUFSIZE; server_iob.line_buffer = malloc(server_iob.line_buffer_size); server_iob.io_buffer_size = STARTBUFSIZE; server_iob.io_buffer = malloc(server_iob.io_buffer_size); server_iob.next_byte = 0; server_iob.io_buffer_len = 0; server_iob.alive = 1; server_iob.who = "server"; server_iob.send_oob_flags = MSG_OOB; server_iob.real_sa = real_server_sa; if (client_iob.line_buffer == NULL || client_iob.io_buffer == NULL || server_iob.line_buffer == NULL || server_iob.io_buffer == NULL) { syslog (LOG_NOTICE, "insufficient memory"); exit(EX_UNAVAILABLE); } while (client_iob.alive || server_iob.alive) { int maxfd = 0; fd_set *fdsp; if (client_iob.fd > maxfd) maxfd = client_iob.fd; if (client_listen_socket > maxfd) maxfd = client_listen_socket; if (client_data_socket > maxfd) maxfd = client_data_socket; if (server_iob.fd > maxfd) maxfd = server_iob.fd; if (server_listen_socket > maxfd) maxfd = server_listen_socket; if (server_data_socket > maxfd) maxfd = server_data_socket; debuglog(3, "client is %s; server is %s", client_iob.alive ? "alive" : "dead", server_iob.alive ? "alive" : "dead"); fdsp = (fd_set *)calloc(howmany(maxfd + 1, NFDBITS), sizeof(fd_mask)); if (fdsp == NULL) { syslog(LOG_NOTICE, "insufficient memory"); exit(EX_UNAVAILABLE); } if (client_iob.alive && telnet_getline(&client_iob, &server_iob)) { debuglog(3, "client line buffer is \"%s\"", (char *)client_iob.line_buffer); if (client_iob.line_buffer[0] != '\0') do_client_cmd(&client_iob, &server_iob); } else if (server_iob.alive && telnet_getline(&server_iob, &client_iob)) { debuglog(3, "server line buffer is \"%s\"", (char *)server_iob.line_buffer); if (server_iob.line_buffer[0] != '\0') do_server_reply(&server_iob, &client_iob); } else { if (client_iob.alive) { FD_SET(client_iob.fd, fdsp); if (client_listen_socket >= 0) FD_SET(client_listen_socket, fdsp); if (client_data_socket >= 0) FD_SET(client_data_socket, fdsp); } if (server_iob.alive) { FD_SET(server_iob.fd, fdsp); if (server_listen_socket >= 0) FD_SET(server_listen_socket, fdsp); if (server_data_socket >= 0) FD_SET(server_data_socket, fdsp); } tv.tv_sec = timeout_seconds; tv.tv_usec = 0; doselect: sval = select(maxfd + 1, fdsp, NULL, NULL, (tv.tv_sec == 0) ? NULL : &tv); if (sval == 0) { /* * This proxy has timed out. Expire it * quietly with an obituary in the syslogs * for any passing mourners. */ syslog(LOG_INFO, "timeout: no data for %ld seconds", timeout_seconds); exit(EX_OK); } if (sval == -1) { if (errno == EINTR || errno == EAGAIN) goto doselect; syslog(LOG_NOTICE, "select() failed (%m)"); exit(EX_OSERR); } if (client_data_socket >= 0 && FD_ISSET(client_data_socket, fdsp)) { int rval; debuglog(3, "transfer: client to server"); rval = xfer_data("client to server", client_data_socket, server_data_socket, client_iob.sa.sin_addr, real_server_sa.sin_addr); if (rval <= 0) { close_client_data(); close_server_data(); show_xfer_stats(); } else client_data_bytes += rval; } if (server_data_socket >= 0 && FD_ISSET(server_data_socket, fdsp)) { int rval; debuglog(3, "transfer: server to client"); rval = xfer_data("server to client", server_data_socket, client_data_socket, real_server_sa.sin_addr, client_iob.sa.sin_addr); if (rval <= 0) { close_client_data(); close_server_data(); show_xfer_stats(); } else server_data_bytes += rval; } if (server_listen_socket >= 0 && FD_ISSET(server_listen_socket, fdsp)) { connect_port_backchannel(); } if (client_listen_socket >= 0 && FD_ISSET(client_listen_socket, fdsp)) { connect_pasv_backchannel(); } if (client_iob.alive && FD_ISSET(client_iob.fd, fdsp)) { client_iob.data_available = 1; } if (server_iob.alive && FD_ISSET(server_iob.fd, fdsp)) { server_iob.data_available = 1; } } free(fdsp); if (client_iob.got_eof) { shutdown(server_iob.fd, 1); shutdown(client_iob.fd, 0); client_iob.got_eof = 0; client_iob.alive = 0; } if (server_iob.got_eof) { shutdown(client_iob.fd, 1); shutdown(server_iob.fd, 0); server_iob.got_eof = 0; server_iob.alive = 0; } } if (Verbose) syslog(LOG_INFO, "session ended"); exit(EX_OK); }